Tadić, Nenad B.

Link to this page

Authority KeyName Variants
174dd5a2-8270-4529-8bf0-eb0a3c224d17
  • Tadić, Nenad B. (17)
Projects

Author's Bibliography

Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing

Dojčinović, Milena P.; Vasiljević, Zorka Ž.; Krstić, Jugoslav B.; Vujančević, Jelena D.; Marković, Smilja; Tadić, Nenad B.; Nikolic, Maria Vesna

(Basel : MDPI AG, 2021)

TY  - JOUR
AU  - Dojčinović, Milena P.
AU  - Vasiljević, Zorka Ž.
AU  - Krstić, Jugoslav B.
AU  - Vujančević, Jelena D.
AU  - Marković, Smilja
AU  - Tadić, Nenad B.
AU  - Nikolic, Maria Vesna
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11797
AB  - Nickel manganite nanocrystalline fibers were obtained by electrospinning and subsequent calcination at 400 °C. As-spun fibers were characterized by TG/DTA, Scanning Electron Microscopy and FT-IR spectroscopy analysis. X-ray diffraction and FT-IR spectroscopy analysis confirmed the formation of nickel manganite with a cubic spinel structure, while N2 physisorption at 77 K enabled determination of the BET specific surface area as 25.3 m2/g and (BJH) mesopore volume as 21.5 m2/g. The material constant (B) of the nanocrystalline nickel manganite fibers applied by drop-casting on test interdigitated electrodes on alumina substrate, dried at room temperature, was determined as 4379 K in the 20–50 °C temperature range and a temperature sensitivity of −4.95%/K at room temperature (25 °C). The change of impedance with relative humidity was monitored at 25 and 50 °C for a relative humidity (RH) change of 40 to 90% in the 42 Hzπ1 MHz frequency range. At 100 Hz and 25 °C, the sensitivity of 327.36 ± 80.12 kΩ/%RH was determined, showing that nickel manganite obtained by electrospinning has potential as a multifunctional material for combined humidity and temperature sensing.
PB  - Basel : MDPI AG
T2  - Sensors
T1  - Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing
SP  - 4357
VL  - 21
IS  - 13
DO  - 10.3390/s21134357
UR  - https://hdl.handle.net/21.15107/rcub_dais_11797
ER  - 
@article{
author = "Dojčinović, Milena P. and Vasiljević, Zorka Ž. and Krstić, Jugoslav B. and Vujančević, Jelena D. and Marković, Smilja and Tadić, Nenad B. and Nikolic, Maria Vesna",
year = "2021",
abstract = "Nickel manganite nanocrystalline fibers were obtained by electrospinning and subsequent calcination at 400 °C. As-spun fibers were characterized by TG/DTA, Scanning Electron Microscopy and FT-IR spectroscopy analysis. X-ray diffraction and FT-IR spectroscopy analysis confirmed the formation of nickel manganite with a cubic spinel structure, while N2 physisorption at 77 K enabled determination of the BET specific surface area as 25.3 m2/g and (BJH) mesopore volume as 21.5 m2/g. The material constant (B) of the nanocrystalline nickel manganite fibers applied by drop-casting on test interdigitated electrodes on alumina substrate, dried at room temperature, was determined as 4379 K in the 20–50 °C temperature range and a temperature sensitivity of −4.95%/K at room temperature (25 °C). The change of impedance with relative humidity was monitored at 25 and 50 °C for a relative humidity (RH) change of 40 to 90% in the 42 Hzπ1 MHz frequency range. At 100 Hz and 25 °C, the sensitivity of 327.36 ± 80.12 kΩ/%RH was determined, showing that nickel manganite obtained by electrospinning has potential as a multifunctional material for combined humidity and temperature sensing.",
publisher = "Basel : MDPI AG",
journal = "Sensors",
title = "Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing",
pages = "4357",
volume = "21",
number = "13",
doi = "10.3390/s21134357",
url = "https://hdl.handle.net/21.15107/rcub_dais_11797"
}
Dojčinović, M. P., Vasiljević, Z. Ž., Krstić, J. B., Vujančević, J. D., Marković, S., Tadić, N. B.,& Nikolic, M. V.. (2021). Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing. in Sensors
Basel : MDPI AG., 21(13), 4357.
https://doi.org/10.3390/s21134357
https://hdl.handle.net/21.15107/rcub_dais_11797
Dojčinović MP, Vasiljević ZŽ, Krstić JB, Vujančević JD, Marković S, Tadić NB, Nikolic MV. Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing. in Sensors. 2021;21(13):4357.
doi:10.3390/s21134357
https://hdl.handle.net/21.15107/rcub_dais_11797 .
Dojčinović, Milena P., Vasiljević, Zorka Ž., Krstić, Jugoslav B., Vujančević, Jelena D., Marković, Smilja, Tadić, Nenad B., Nikolic, Maria Vesna, "Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing" in Sensors, 21, no. 13 (2021):4357,
https://doi.org/10.3390/s21134357 .,
https://hdl.handle.net/21.15107/rcub_dais_11797 .
1
1

Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing

Nikolić, Maria Vesna; Krstić, Jugoslav; Labus, Nebojša; Luković, Miloljub; Dojčinović, Milena; Radovanović, Milan; Tadić, Nenad B.

(Elsevier, 2020)

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Krstić, Jugoslav
AU  - Labus, Nebojša
AU  - Luković, Miloljub
AU  - Dojčinović, Milena
AU  - Radovanović, Milan
AU  - Tadić, Nenad B.
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10036
AB  - Iron manganite (FeMnO3) powder with a cubic (bixbyite,−Ia3) crystal structure was obtained by a solid statereaction. Thick film paste (powder+organic vehicles) was screen printed on alumina substrate with test interdigitatedPdAg electrodes. Significant porosity (60.6%) composed of macropores (larger than 100 nm) wasdetermined by Hg porosimetry, changing only slightly from the first extrusion run indicating a stable poresystem. Hg porosimetry evaluation of thick film samples enabled estimation of true textural parameters of thethick film compared to powder. Impedance response of the thick film sensor was monitored in a humiditychamber in the relative humidity (RH) range 30–90%, at room temperature (25 °C) and frequency range from42 Hz to 1 MHz. At 100 Hz the impedance reduced from 10.41 MΩ for RH 30% to 0.68 MΩ for RH 90%. Analysisof complex impedance using an equivalent circuit showed the dominant influence of grain boundaries. Thesensor response and recovery was fast (several seconds) and a relatively low hysteresis value of 2.8% wasobtained.
PB  - Elsevier
T2  - Materials Science and Engineering B: Solid-State Materials for Advanced Technology
T1  - Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing
SP  - 114547
VL  - 257
DO  - 10.1016/j.mseb.2020.114547
UR  - https://hdl.handle.net/21.15107/rcub_dais_10036
ER  - 
@article{
author = "Nikolić, Maria Vesna and Krstić, Jugoslav and Labus, Nebojša and Luković, Miloljub and Dojčinović, Milena and Radovanović, Milan and Tadić, Nenad B.",
year = "2020",
abstract = "Iron manganite (FeMnO3) powder with a cubic (bixbyite,−Ia3) crystal structure was obtained by a solid statereaction. Thick film paste (powder+organic vehicles) was screen printed on alumina substrate with test interdigitatedPdAg electrodes. Significant porosity (60.6%) composed of macropores (larger than 100 nm) wasdetermined by Hg porosimetry, changing only slightly from the first extrusion run indicating a stable poresystem. Hg porosimetry evaluation of thick film samples enabled estimation of true textural parameters of thethick film compared to powder. Impedance response of the thick film sensor was monitored in a humiditychamber in the relative humidity (RH) range 30–90%, at room temperature (25 °C) and frequency range from42 Hz to 1 MHz. At 100 Hz the impedance reduced from 10.41 MΩ for RH 30% to 0.68 MΩ for RH 90%. Analysisof complex impedance using an equivalent circuit showed the dominant influence of grain boundaries. Thesensor response and recovery was fast (several seconds) and a relatively low hysteresis value of 2.8% wasobtained.",
publisher = "Elsevier",
journal = "Materials Science and Engineering B: Solid-State Materials for Advanced Technology",
title = "Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing",
pages = "114547",
volume = "257",
doi = "10.1016/j.mseb.2020.114547",
url = "https://hdl.handle.net/21.15107/rcub_dais_10036"
}
Nikolić, M. V., Krstić, J., Labus, N., Luković, M., Dojčinović, M., Radovanović, M.,& Tadić, N. B.. (2020). Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing. in Materials Science and Engineering B: Solid-State Materials for Advanced Technology
Elsevier., 257, 114547.
https://doi.org/10.1016/j.mseb.2020.114547
https://hdl.handle.net/21.15107/rcub_dais_10036
Nikolić MV, Krstić J, Labus N, Luković M, Dojčinović M, Radovanović M, Tadić NB. Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing. in Materials Science and Engineering B: Solid-State Materials for Advanced Technology. 2020;257:114547.
doi:10.1016/j.mseb.2020.114547
https://hdl.handle.net/21.15107/rcub_dais_10036 .
Nikolić, Maria Vesna, Krstić, Jugoslav, Labus, Nebojša, Luković, Miloljub, Dojčinović, Milena, Radovanović, Milan, Tadić, Nenad B., "Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing" in Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 257 (2020):114547,
https://doi.org/10.1016/j.mseb.2020.114547 .,
https://hdl.handle.net/21.15107/rcub_dais_10036 .
3
2
1

Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing

Nikolić, Maria Vesna; Krstić, Jugoslav; Labus, Nebojša; Luković, Miloljub; Dojčinović, Milena; Radovanović, Milan; Tadić, Nenad B.

(Elsevier, 2020)

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Krstić, Jugoslav
AU  - Labus, Nebojša
AU  - Luković, Miloljub
AU  - Dojčinović, Milena
AU  - Radovanović, Milan
AU  - Tadić, Nenad B.
PY  - 2020
UR  - http://dais.sanu.ac.rs/123456789/8950
AB  - Iron manganite (FeMnO3) powder with a cubic (bixbyite,−Ia3) crystal structure was obtained by a solid statereaction. Thick film paste (powder+organic vehicles) was screen printed on alumina substrate with test interdigitatedPdAg electrodes. Significant porosity (60.6%) composed of macropores (larger than 100 nm) wasdetermined by Hg porosimetry, changing only slightly from the first extrusion run indicating a stable poresystem. Hg porosimetry evaluation of thick film samples enabled estimation of true textural parameters of thethick film compared to powder. Impedance response of the thick film sensor was monitored in a humiditychamber in the relative humidity (RH) range 30–90%, at room temperature (25 °C) and frequency range from42 Hz to 1 MHz. At 100 Hz the impedance reduced from 10.41 MΩ for RH 30% to 0.68 MΩ for RH 90%. Analysisof complex impedance using an equivalent circuit showed the dominant influence of grain boundaries. Thesensor response and recovery was fast (several seconds) and a relatively low hysteresis value of 2.8% wasobtained.
PB  - Elsevier
T2  - Materials Science and Engineering B: Solid-State Materials for Advanced Technology
T1  - Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing
SP  - 114547
VL  - 257
DO  - 10.1016/j.mseb.2020.114547
UR  - https://hdl.handle.net/21.15107/rcub_dais_8950
ER  - 
@article{
author = "Nikolić, Maria Vesna and Krstić, Jugoslav and Labus, Nebojša and Luković, Miloljub and Dojčinović, Milena and Radovanović, Milan and Tadić, Nenad B.",
year = "2020",
abstract = "Iron manganite (FeMnO3) powder with a cubic (bixbyite,−Ia3) crystal structure was obtained by a solid statereaction. Thick film paste (powder+organic vehicles) was screen printed on alumina substrate with test interdigitatedPdAg electrodes. Significant porosity (60.6%) composed of macropores (larger than 100 nm) wasdetermined by Hg porosimetry, changing only slightly from the first extrusion run indicating a stable poresystem. Hg porosimetry evaluation of thick film samples enabled estimation of true textural parameters of thethick film compared to powder. Impedance response of the thick film sensor was monitored in a humiditychamber in the relative humidity (RH) range 30–90%, at room temperature (25 °C) and frequency range from42 Hz to 1 MHz. At 100 Hz the impedance reduced from 10.41 MΩ for RH 30% to 0.68 MΩ for RH 90%. Analysisof complex impedance using an equivalent circuit showed the dominant influence of grain boundaries. Thesensor response and recovery was fast (several seconds) and a relatively low hysteresis value of 2.8% wasobtained.",
publisher = "Elsevier",
journal = "Materials Science and Engineering B: Solid-State Materials for Advanced Technology",
title = "Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing",
pages = "114547",
volume = "257",
doi = "10.1016/j.mseb.2020.114547",
url = "https://hdl.handle.net/21.15107/rcub_dais_8950"
}
Nikolić, M. V., Krstić, J., Labus, N., Luković, M., Dojčinović, M., Radovanović, M.,& Tadić, N. B.. (2020). Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing. in Materials Science and Engineering B: Solid-State Materials for Advanced Technology
Elsevier., 257, 114547.
https://doi.org/10.1016/j.mseb.2020.114547
https://hdl.handle.net/21.15107/rcub_dais_8950
Nikolić MV, Krstić J, Labus N, Luković M, Dojčinović M, Radovanović M, Tadić NB. Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing. in Materials Science and Engineering B: Solid-State Materials for Advanced Technology. 2020;257:114547.
doi:10.1016/j.mseb.2020.114547
https://hdl.handle.net/21.15107/rcub_dais_8950 .
Nikolić, Maria Vesna, Krstić, Jugoslav, Labus, Nebojša, Luković, Miloljub, Dojčinović, Milena, Radovanović, Milan, Tadić, Nenad B., "Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing" in Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 257 (2020):114547,
https://doi.org/10.1016/j.mseb.2020.114547 .,
https://hdl.handle.net/21.15107/rcub_dais_8950 .
3
2
1

Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis

Vasiljević, Zorka Ž.; Dojčinović, Milena; Krstić, Jugoslav B.; Ribić, Vesna; Tadić, Nenad B.; Ognjanović, Miloš; Auger, Sandrine; Vidić, Jasmina; Nikolić, Maria Vesna

(Royal Society of Chemistry, 2020)

TY  - JOUR
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena
AU  - Krstić, Jugoslav B.
AU  - Ribić, Vesna
AU  - Tadić, Nenad B.
AU  - Ognjanović, Miloš
AU  - Auger, Sandrine
AU  - Vidić, Jasmina
AU  - Nikolić, Maria Vesna
PY  - 2020
UR  - http://dais.sanu.ac.rs/123456789/7780
AB  - Nanocrystalline iron manganite powder was synthesized using the sol–gel combustion process, with glycine as fuel. It was further calcined at 900 °C for 8 h, resulting in the formation of a loose cubic FeMnO3 powder with a small specific surface area, net-like structure and plate-like particles as confirmed by XRD, N2 physisorption, FESEM and TEM analyses. The metal ion release was studied by ICP-OES and showed that less than 10 ppb of Fe or Mn ions were released by leaching in water, but 0.36 ppm Fe and 3.69 ppm Mn was found in LB (Luria–Bertani) bacterial medium. The generation of reactive oxygen species (ROS) was monitored in distilled water and bacterial medium and showed that FeMnO3 particles do not generate O2˙− ions with or without UV irradiation, but synthesize H2O2 and show an antioxidative effect. Besides the higher stability of FeMnO3 particles in aqueous solution they showed an inhibitory effect on Bacillus subtilis growth in LB medium even at low concentrations (0.01 mg ml−1), but not in BHI medium even at 1 mg ml−1. This study points out that the mechanism of antibacterial action of engineered metal oxides needs continued investigation and specific experimental controls.
PB  - Royal Society of Chemistry
T2  - RSC Advances
T1  - Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis
SP  - 13879
EP  - 13888
VL  - 10
IS  - 23
DO  - 10.1039/D0RA01809K
UR  - https://hdl.handle.net/21.15107/rcub_dais_7780
ER  - 
@article{
author = "Vasiljević, Zorka Ž. and Dojčinović, Milena and Krstić, Jugoslav B. and Ribić, Vesna and Tadić, Nenad B. and Ognjanović, Miloš and Auger, Sandrine and Vidić, Jasmina and Nikolić, Maria Vesna",
year = "2020",
abstract = "Nanocrystalline iron manganite powder was synthesized using the sol–gel combustion process, with glycine as fuel. It was further calcined at 900 °C for 8 h, resulting in the formation of a loose cubic FeMnO3 powder with a small specific surface area, net-like structure and plate-like particles as confirmed by XRD, N2 physisorption, FESEM and TEM analyses. The metal ion release was studied by ICP-OES and showed that less than 10 ppb of Fe or Mn ions were released by leaching in water, but 0.36 ppm Fe and 3.69 ppm Mn was found in LB (Luria–Bertani) bacterial medium. The generation of reactive oxygen species (ROS) was monitored in distilled water and bacterial medium and showed that FeMnO3 particles do not generate O2˙− ions with or without UV irradiation, but synthesize H2O2 and show an antioxidative effect. Besides the higher stability of FeMnO3 particles in aqueous solution they showed an inhibitory effect on Bacillus subtilis growth in LB medium even at low concentrations (0.01 mg ml−1), but not in BHI medium even at 1 mg ml−1. This study points out that the mechanism of antibacterial action of engineered metal oxides needs continued investigation and specific experimental controls.",
publisher = "Royal Society of Chemistry",
journal = "RSC Advances",
title = "Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis",
pages = "13879-13888",
volume = "10",
number = "23",
doi = "10.1039/D0RA01809K",
url = "https://hdl.handle.net/21.15107/rcub_dais_7780"
}
Vasiljević, Z. Ž., Dojčinović, M., Krstić, J. B., Ribić, V., Tadić, N. B., Ognjanović, M., Auger, S., Vidić, J.,& Nikolić, M. V.. (2020). Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis. in RSC Advances
Royal Society of Chemistry., 10(23), 13879-13888.
https://doi.org/10.1039/D0RA01809K
https://hdl.handle.net/21.15107/rcub_dais_7780
Vasiljević ZŽ, Dojčinović M, Krstić JB, Ribić V, Tadić NB, Ognjanović M, Auger S, Vidić J, Nikolić MV. Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis. in RSC Advances. 2020;10(23):13879-13888.
doi:10.1039/D0RA01809K
https://hdl.handle.net/21.15107/rcub_dais_7780 .
Vasiljević, Zorka Ž., Dojčinović, Milena, Krstić, Jugoslav B., Ribić, Vesna, Tadić, Nenad B., Ognjanović, Miloš, Auger, Sandrine, Vidić, Jasmina, Nikolić, Maria Vesna, "Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis" in RSC Advances, 10, no. 23 (2020):13879-13888,
https://doi.org/10.1039/D0RA01809K .,
https://hdl.handle.net/21.15107/rcub_dais_7780 .
8
6
4

Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method

Vasiljević, Zorka Ž.; Dojčinović, Milena; Vujančević, Jelena; Janković Častvan, Ivona; Ognjanović, M.; Tadić, Nenad B.; Stojadinović, Stevan; Branković, Goran; Nikolić, Maria Vesna

(Royal Society, 2020)

TY  - JOUR
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena
AU  - Vujančević, Jelena
AU  - Janković Častvan, Ivona
AU  - Ognjanović, M.
AU  - Tadić, Nenad B.
AU  - Stojadinović, Stevan
AU  - Branković, Goran
AU  - Nikolić, Maria Vesna
PY  - 2020
UR  - http://dais.sanu.ac.rs/123456789/9107
AB  - The aim of this work was to synthesize semiconducting oxide nanoparticles using a simple method with low production cost to be applied in natural sunlight for photocatalytic degradation of pollutants in waste water. Iron titanate (Fe2TiO5) nanoparticles with an orthorhombic structure were successfully synthesized using a modified sol–gel method and calcination at 750°C. The as-prepared Fe2TiO5 nanoparticles exhibited a moderate specific surface area. The mesoporous Fe2TiO5 nanoparticles possessed strong absorption in the visible-light region and the band gap was estimated to be around 2.16 eV. The photocatalytic activity was evaluated by the degradation of methylene blue under natural sunlight. The effect of parameters such as the amount of catalyst, initial concentration of the dye and pH of the dye solution on the removal efficiency of methylene blue was investigated. Fe2TiO5 showed high degradation efficiency in a strong alkaline medium that can be the result of the facilitated formation of OH radicals due to an increased concentration of hydroxyl ions.
PB  - Royal Society
T2  - Royal Society Open Science
T1  - Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method
VL  - 7
IS  - 9
DO  - 10.1098/rsos.200708
UR  - https://hdl.handle.net/21.15107/rcub_dais_9107
ER  - 
@article{
author = "Vasiljević, Zorka Ž. and Dojčinović, Milena and Vujančević, Jelena and Janković Častvan, Ivona and Ognjanović, M. and Tadić, Nenad B. and Stojadinović, Stevan and Branković, Goran and Nikolić, Maria Vesna",
year = "2020",
abstract = "The aim of this work was to synthesize semiconducting oxide nanoparticles using a simple method with low production cost to be applied in natural sunlight for photocatalytic degradation of pollutants in waste water. Iron titanate (Fe2TiO5) nanoparticles with an orthorhombic structure were successfully synthesized using a modified sol–gel method and calcination at 750°C. The as-prepared Fe2TiO5 nanoparticles exhibited a moderate specific surface area. The mesoporous Fe2TiO5 nanoparticles possessed strong absorption in the visible-light region and the band gap was estimated to be around 2.16 eV. The photocatalytic activity was evaluated by the degradation of methylene blue under natural sunlight. The effect of parameters such as the amount of catalyst, initial concentration of the dye and pH of the dye solution on the removal efficiency of methylene blue was investigated. Fe2TiO5 showed high degradation efficiency in a strong alkaline medium that can be the result of the facilitated formation of OH radicals due to an increased concentration of hydroxyl ions.",
publisher = "Royal Society",
journal = "Royal Society Open Science",
title = "Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method",
volume = "7",
number = "9",
doi = "10.1098/rsos.200708",
url = "https://hdl.handle.net/21.15107/rcub_dais_9107"
}
Vasiljević, Z. Ž., Dojčinović, M., Vujančević, J., Janković Častvan, I., Ognjanović, M., Tadić, N. B., Stojadinović, S., Branković, G.,& Nikolić, M. V.. (2020). Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method. in Royal Society Open Science
Royal Society., 7(9).
https://doi.org/10.1098/rsos.200708
https://hdl.handle.net/21.15107/rcub_dais_9107
Vasiljević ZŽ, Dojčinović M, Vujančević J, Janković Častvan I, Ognjanović M, Tadić NB, Stojadinović S, Branković G, Nikolić MV. Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method. in Royal Society Open Science. 2020;7(9).
doi:10.1098/rsos.200708
https://hdl.handle.net/21.15107/rcub_dais_9107 .
Vasiljević, Zorka Ž., Dojčinović, Milena, Vujančević, Jelena, Janković Častvan, Ivona, Ognjanović, M., Tadić, Nenad B., Stojadinović, Stevan, Branković, Goran, Nikolić, Maria Vesna, "Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method" in Royal Society Open Science, 7, no. 9 (2020),
https://doi.org/10.1098/rsos.200708 .,
https://hdl.handle.net/21.15107/rcub_dais_9107 .
10
5

Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing

Nikolić, Maria Vesna; Vasiljević, Zorka Ž.; Luković, Miloljub D.; Pavlović, Vera P.; Krstić, Jugoslav B.; Vujančević, Jelena; Tadić, Nenad B.; Vlahović, Branislav; Pavlović, Vladimir B.

(John Wiley & Sons, Inc., 2019)

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Vasiljević, Zorka Ž.
AU  - Luković, Miloljub D.
AU  - Pavlović, Vera P.
AU  - Krstić, Jugoslav B.
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/ijac.13190
UR  - http://dais.sanu.ac.rs/123456789/5766
AB  - Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.
PB  - John Wiley & Sons, Inc.
T2  - International Journal of Applied Ceramic Technology
T1  - Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing
SP  - 981
EP  - 993
VL  - 16
IS  - 3
DO  - 10.1111/ijac.13190
UR  - https://hdl.handle.net/21.15107/rcub_dais_5766
ER  - 
@article{
author = "Nikolić, Maria Vesna and Vasiljević, Zorka Ž. and Luković, Miloljub D. and Pavlović, Vera P. and Krstić, Jugoslav B. and Vujančević, Jelena and Tadić, Nenad B. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.",
publisher = "John Wiley & Sons, Inc.",
journal = "International Journal of Applied Ceramic Technology",
title = "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing",
pages = "981-993",
volume = "16",
number = "3",
doi = "10.1111/ijac.13190",
url = "https://hdl.handle.net/21.15107/rcub_dais_5766"
}
Nikolić, M. V., Vasiljević, Z. Ž., Luković, M. D., Pavlović, V. P., Krstić, J. B., Vujančević, J., Tadić, N. B., Vlahović, B.,& Pavlović, V. B.. (2019). Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing. in International Journal of Applied Ceramic Technology
John Wiley & Sons, Inc.., 16(3), 981-993.
https://doi.org/10.1111/ijac.13190
https://hdl.handle.net/21.15107/rcub_dais_5766
Nikolić MV, Vasiljević ZŽ, Luković MD, Pavlović VP, Krstić JB, Vujančević J, Tadić NB, Vlahović B, Pavlović VB. Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing. in International Journal of Applied Ceramic Technology. 2019;16(3):981-993.
doi:10.1111/ijac.13190
https://hdl.handle.net/21.15107/rcub_dais_5766 .
Nikolić, Maria Vesna, Vasiljević, Zorka Ž., Luković, Miloljub D., Pavlović, Vera P., Krstić, Jugoslav B., Vujančević, Jelena, Tadić, Nenad B., Vlahović, Branislav, Pavlović, Vladimir B., "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing" in International Journal of Applied Ceramic Technology, 16, no. 3 (2019):981-993,
https://doi.org/10.1111/ijac.13190 .,
https://hdl.handle.net/21.15107/rcub_dais_5766 .
13
12
12

Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing

Nikolić, Maria Vesna; Vasiljević, Zorka Ž.; Luković, Miloljub D.; Pavlović, Vera P.; Krstić, Jugoslav B.; Vujančević, Jelena; Tadić, Nenad B.; Vlahović, Branislav; Pavlović, Vladimir B.

(John Wiley & Sons, Inc., 2019)

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Vasiljević, Zorka Ž.
AU  - Luković, Miloljub D.
AU  - Pavlović, Vera P.
AU  - Krstić, Jugoslav B.
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/ijac.13190
UR  - http://dais.sanu.ac.rs/123456789/4848
AB  - Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.
PB  - John Wiley & Sons, Inc.
T2  - International Journal of Applied Ceramic Technology
T1  - Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing
SP  - 981
EP  - 993
VL  - 16
IS  - 3
DO  - 10.1111/ijac.13190
UR  - https://hdl.handle.net/21.15107/rcub_dais_4848
ER  - 
@article{
author = "Nikolić, Maria Vesna and Vasiljević, Zorka Ž. and Luković, Miloljub D. and Pavlović, Vera P. and Krstić, Jugoslav B. and Vujančević, Jelena and Tadić, Nenad B. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.",
publisher = "John Wiley & Sons, Inc.",
journal = "International Journal of Applied Ceramic Technology",
title = "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing",
pages = "981-993",
volume = "16",
number = "3",
doi = "10.1111/ijac.13190",
url = "https://hdl.handle.net/21.15107/rcub_dais_4848"
}
Nikolić, M. V., Vasiljević, Z. Ž., Luković, M. D., Pavlović, V. P., Krstić, J. B., Vujančević, J., Tadić, N. B., Vlahović, B.,& Pavlović, V. B.. (2019). Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing. in International Journal of Applied Ceramic Technology
John Wiley & Sons, Inc.., 16(3), 981-993.
https://doi.org/10.1111/ijac.13190
https://hdl.handle.net/21.15107/rcub_dais_4848
Nikolić MV, Vasiljević ZŽ, Luković MD, Pavlović VP, Krstić JB, Vujančević J, Tadić NB, Vlahović B, Pavlović VB. Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing. in International Journal of Applied Ceramic Technology. 2019;16(3):981-993.
doi:10.1111/ijac.13190
https://hdl.handle.net/21.15107/rcub_dais_4848 .
Nikolić, Maria Vesna, Vasiljević, Zorka Ž., Luković, Miloljub D., Pavlović, Vera P., Krstić, Jugoslav B., Vujančević, Jelena, Tadić, Nenad B., Vlahović, Branislav, Pavlović, Vladimir B., "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing" in International Journal of Applied Ceramic Technology, 16, no. 3 (2019):981-993,
https://doi.org/10.1111/ijac.13190 .,
https://hdl.handle.net/21.15107/rcub_dais_4848 .
13
12
12

Nanocrystalline iron-manganite (FeMnO3) applied for humidity sensing

Vasiljević, Zorka Ž.; Dojčinović, Milena; Vujančević, Jelena; Tadić, Nenad B.; Nikolić, Maria Vesna

(Belgrade : Institute for Multidisciplinary Research, 2019)

TY  - CONF
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Nikolić, Maria Vesna
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/7005
AB  - Nanocrystalline iron manganite was synthesized using a sol-gel self-combustion method with glycine as fuel, followed by calcination at 900 °C for 8 hours. Structural characterization was performed using X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). It confirmed the formation of nanocrystalline iron-manganite with a perovskite structure. Humidity sensing properties of bulk and thick film samples of the obtained nanocrystalline iron manganite powder were analyzed. Organic vehicles were added to the powder to form a thick film paste that was screen printed on alumina substrate with test PdAg interdigitated electrodes. Impedance response of bulk and thick film samples was analyzed in a humidity chamber in the relative humidity range 30-90% in the frequency range 42 Hz to 1 MHz in view of applying iron-manganite for humidity sensing applications.
PB  - Belgrade : Institute for Multidisciplinary Research
C3  - Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, Serbia
T1  - Nanocrystalline iron-manganite (FeMnO3) applied for humidity sensing
SP  - 94
EP  - 94
UR  - https://hdl.handle.net/21.15107/rcub_dais_7005
ER  - 
@conference{
author = "Vasiljević, Zorka Ž. and Dojčinović, Milena and Vujančević, Jelena and Tadić, Nenad B. and Nikolić, Maria Vesna",
year = "2019",
abstract = "Nanocrystalline iron manganite was synthesized using a sol-gel self-combustion method with glycine as fuel, followed by calcination at 900 °C for 8 hours. Structural characterization was performed using X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). It confirmed the formation of nanocrystalline iron-manganite with a perovskite structure. Humidity sensing properties of bulk and thick film samples of the obtained nanocrystalline iron manganite powder were analyzed. Organic vehicles were added to the powder to form a thick film paste that was screen printed on alumina substrate with test PdAg interdigitated electrodes. Impedance response of bulk and thick film samples was analyzed in a humidity chamber in the relative humidity range 30-90% in the frequency range 42 Hz to 1 MHz in view of applying iron-manganite for humidity sensing applications.",
publisher = "Belgrade : Institute for Multidisciplinary Research",
journal = "Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, Serbia",
title = "Nanocrystalline iron-manganite (FeMnO3) applied for humidity sensing",
pages = "94-94",
url = "https://hdl.handle.net/21.15107/rcub_dais_7005"
}
Vasiljević, Z. Ž., Dojčinović, M., Vujančević, J., Tadić, N. B.,& Nikolić, M. V.. (2019). Nanocrystalline iron-manganite (FeMnO3) applied for humidity sensing. in Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, Serbia
Belgrade : Institute for Multidisciplinary Research., 94-94.
https://hdl.handle.net/21.15107/rcub_dais_7005
Vasiljević ZŽ, Dojčinović M, Vujančević J, Tadić NB, Nikolić MV. Nanocrystalline iron-manganite (FeMnO3) applied for humidity sensing. in Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, Serbia. 2019;:94-94.
https://hdl.handle.net/21.15107/rcub_dais_7005 .
Vasiljević, Zorka Ž., Dojčinović, Milena, Vujančević, Jelena, Tadić, Nenad B., Nikolić, Maria Vesna, "Nanocrystalline iron-manganite (FeMnO3) applied for humidity sensing" in Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, Serbia (2019):94-94,
https://hdl.handle.net/21.15107/rcub_dais_7005 .

Influence of Co2+ ions on photocatalytic properties of MgFe2O4 ferrites

Vasiljević, Zorka Ž.; Dojčinović, Milena; Pavlović, Vera P.; Vujančević, Jelena; Marković, Smilja; Tadić, Nenad B.; Nikolić, Maria Vesna

(Belgrade : Institute for Multidisciplinary Research, 2019)

TY  - CONF
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena
AU  - Pavlović, Vera P.
AU  - Vujančević, Jelena
AU  - Marković, Smilja
AU  - Tadić, Nenad B.
AU  - Nikolić, Maria Vesna
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/7003
AB  - In this work, spinel magnesium cobalt ferrites (CoxMg1-xFe2O4, x = 0.0, 0.1, 0.3, 0.5, 0.7, 0.9) were synthesized by a sol-gel combustion method. Magnesium nitrate, cobalt nitrate and iron nitrate were used as oxidizers and citric acid was used as a reducing agent. The effects of cobalt ions on structural and morphological properties were investigated and characterized by X-ray diffraction (XRD), Raman spectroscopy, Field emission scanning electron microscope (FESEM) and Fourier transform infrared (FT-IR) spectroscopy. A cubic spinel structure formed with a varied distribution of cobalt and magnesium ions on tetrahedral and octahedral sites that depended on their content. All ferrite powders consisted of multigrain agglomerates. Optical properties were investigated by UV- vis spectrophotometry. The photocatalytic activity of as prepared samples was evaluated by measuring the rate of photodegradation reaction of methylene blue (MB) under visible light irradiation. After 240 min, compared to other samples, the sample labeled as Co0.1Mg0.9Fe2O4 showed the best rate of photodecomposition of MB resulting in reduction of 90% of its initial concentration.
PB  - Belgrade : Institute for Multidisciplinary Research
C3  - Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, Serbia
T1  - Influence of Co2+ ions on photocatalytic properties of MgFe2O4 ferrites
SP  - 73
EP  - 73
UR  - https://hdl.handle.net/21.15107/rcub_dais_7003
ER  - 
@conference{
author = "Vasiljević, Zorka Ž. and Dojčinović, Milena and Pavlović, Vera P. and Vujančević, Jelena and Marković, Smilja and Tadić, Nenad B. and Nikolić, Maria Vesna",
year = "2019",
abstract = "In this work, spinel magnesium cobalt ferrites (CoxMg1-xFe2O4, x = 0.0, 0.1, 0.3, 0.5, 0.7, 0.9) were synthesized by a sol-gel combustion method. Magnesium nitrate, cobalt nitrate and iron nitrate were used as oxidizers and citric acid was used as a reducing agent. The effects of cobalt ions on structural and morphological properties were investigated and characterized by X-ray diffraction (XRD), Raman spectroscopy, Field emission scanning electron microscope (FESEM) and Fourier transform infrared (FT-IR) spectroscopy. A cubic spinel structure formed with a varied distribution of cobalt and magnesium ions on tetrahedral and octahedral sites that depended on their content. All ferrite powders consisted of multigrain agglomerates. Optical properties were investigated by UV- vis spectrophotometry. The photocatalytic activity of as prepared samples was evaluated by measuring the rate of photodegradation reaction of methylene blue (MB) under visible light irradiation. After 240 min, compared to other samples, the sample labeled as Co0.1Mg0.9Fe2O4 showed the best rate of photodecomposition of MB resulting in reduction of 90% of its initial concentration.",
publisher = "Belgrade : Institute for Multidisciplinary Research",
journal = "Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, Serbia",
title = "Influence of Co2+ ions on photocatalytic properties of MgFe2O4 ferrites",
pages = "73-73",
url = "https://hdl.handle.net/21.15107/rcub_dais_7003"
}
Vasiljević, Z. Ž., Dojčinović, M., Pavlović, V. P., Vujančević, J., Marković, S., Tadić, N. B.,& Nikolić, M. V.. (2019). Influence of Co2+ ions on photocatalytic properties of MgFe2O4 ferrites. in Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, Serbia
Belgrade : Institute for Multidisciplinary Research., 73-73.
https://hdl.handle.net/21.15107/rcub_dais_7003
Vasiljević ZŽ, Dojčinović M, Pavlović VP, Vujančević J, Marković S, Tadić NB, Nikolić MV. Influence of Co2+ ions on photocatalytic properties of MgFe2O4 ferrites. in Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, Serbia. 2019;:73-73.
https://hdl.handle.net/21.15107/rcub_dais_7003 .
Vasiljević, Zorka Ž., Dojčinović, Milena, Pavlović, Vera P., Vujančević, Jelena, Marković, Smilja, Tadić, Nenad B., Nikolić, Maria Vesna, "Influence of Co2+ ions on photocatalytic properties of MgFe2O4 ferrites" in Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, Serbia (2019):73-73,
https://hdl.handle.net/21.15107/rcub_dais_7003 .

Structure and photocatalytic properties of sol-gel synthesized pseudobrookite

Vasiljević, Zorka Ž.; Dojčinović, Milena; Janković Častvan, Ivona; Vujančević, Jelena; Tadić, Nenad B.; Nikolić, Maria Vesna

(Novi Sad : Faculty of Technology, 2019)

TY  - CONF
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena
AU  - Janković Častvan, Ivona
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Nikolić, Maria Vesna
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6988
AB  - Fe2TiO5 nanopartcles were synthesized by modified sol-gel method with aid of
Fe(NO3)3 9H2O and Ti(OC3H7)4 as starting reagents, oxalic acid as chilate agent and cetyltrimethylammonium bromide as surfactant. The aim of this study was to asses the photocatalytic degradaton of the antibiotic Oxytetracycline (OTC) using visible light irradiation. As prepared nanoparticles were characterized by XRD, BET, FESEM and UV-vis DRS. The optimal operating conditions of oxytetracycline photocatalytic degradation were achived by changing the pH of the solution and changing the concentration of photocatalyst.
PB  - Novi Sad : Faculty of Technology
C3  - Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad
T1  - Structure and photocatalytic properties of sol-gel synthesized pseudobrookite
SP  - 133
EP  - 133
UR  - https://hdl.handle.net/21.15107/rcub_dais_6988
ER  - 
@conference{
author = "Vasiljević, Zorka Ž. and Dojčinović, Milena and Janković Častvan, Ivona and Vujančević, Jelena and Tadić, Nenad B. and Nikolić, Maria Vesna",
year = "2019",
abstract = "Fe2TiO5 nanopartcles were synthesized by modified sol-gel method with aid of
Fe(NO3)3 9H2O and Ti(OC3H7)4 as starting reagents, oxalic acid as chilate agent and cetyltrimethylammonium bromide as surfactant. The aim of this study was to asses the photocatalytic degradaton of the antibiotic Oxytetracycline (OTC) using visible light irradiation. As prepared nanoparticles were characterized by XRD, BET, FESEM and UV-vis DRS. The optimal operating conditions of oxytetracycline photocatalytic degradation were achived by changing the pH of the solution and changing the concentration of photocatalyst.",
publisher = "Novi Sad : Faculty of Technology",
journal = "Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad",
title = "Structure and photocatalytic properties of sol-gel synthesized pseudobrookite",
pages = "133-133",
url = "https://hdl.handle.net/21.15107/rcub_dais_6988"
}
Vasiljević, Z. Ž., Dojčinović, M., Janković Častvan, I., Vujančević, J., Tadić, N. B.,& Nikolić, M. V.. (2019). Structure and photocatalytic properties of sol-gel synthesized pseudobrookite. in Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad
Novi Sad : Faculty of Technology., 133-133.
https://hdl.handle.net/21.15107/rcub_dais_6988
Vasiljević ZŽ, Dojčinović M, Janković Častvan I, Vujančević J, Tadić NB, Nikolić MV. Structure and photocatalytic properties of sol-gel synthesized pseudobrookite. in Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad. 2019;:133-133.
https://hdl.handle.net/21.15107/rcub_dais_6988 .
Vasiljević, Zorka Ž., Dojčinović, Milena, Janković Častvan, Ivona, Vujančević, Jelena, Tadić, Nenad B., Nikolić, Maria Vesna, "Structure and photocatalytic properties of sol-gel synthesized pseudobrookite" in Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad (2019):133-133,
https://hdl.handle.net/21.15107/rcub_dais_6988 .

Visible light photocatalytic activity of nanocrystalline CoxMg1-xFe2O4 (x = 0-1)

Dojčinović, Milena; Vasiljević, Zorka Ž.; Vujančević, Jelena; Pavlović, Vera P.; Marković, Smilja; Tadić, Nenad B.; Nikolić, Marina V.

(Novi Sad : Faculty of Technology, 2019)

TY  - CONF
AU  - Dojčinović, Milena
AU  - Vasiljević, Zorka Ž.
AU  - Vujančević, Jelena
AU  - Pavlović, Vera P.
AU  - Marković, Smilja
AU  - Tadić, Nenad B.
AU  - Nikolić, Marina V.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6986
AB  - The sol-gel combustion method was applied for synthesis of spinel magnesium cobalt ferrites CoxMg1-xFe2O4, with varying cobalt and magnesium content, x = 0.0, 0.1, 0.3, 0.5, 0.7, 0.9. Magnesium nitrate, cobalt nitrate and iron nitrate were used as oxidizers and citric acid was used as a reducing agent. Structural and morphological properties of the obtained ferrite powders were investigated and characterized by X-ray diffraction (XRD), Raman spectroscopy, Field emission scanning electron microscope (FESEM) and Fourier transform infrared (FT-IR) spectroscopy. Optical properties were investigated by UV-VIS spectrophotometry. A cubic spinel structure with multigrain agglomerates formed. Visible light photocatalytic activity of the spinel ferrite powder samples was evaluated by measuring the rate of photodegradation reaction of methylene blue (MB). After 240 min Co0.1Mg0.9Fe2O4 showed the best rate of photodecomposition of MB resulting in 90% of its initial concentration in an alkaline environment.
PB  - Novi Sad : Faculty of Technology
C3  - Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad
T1  - Visible light photocatalytic activity of nanocrystalline CoxMg1-xFe2O4 (x = 0-1)
SP  - 136
EP  - 136
UR  - https://hdl.handle.net/21.15107/rcub_dais_6986
ER  - 
@conference{
author = "Dojčinović, Milena and Vasiljević, Zorka Ž. and Vujančević, Jelena and Pavlović, Vera P. and Marković, Smilja and Tadić, Nenad B. and Nikolić, Marina V.",
year = "2019",
abstract = "The sol-gel combustion method was applied for synthesis of spinel magnesium cobalt ferrites CoxMg1-xFe2O4, with varying cobalt and magnesium content, x = 0.0, 0.1, 0.3, 0.5, 0.7, 0.9. Magnesium nitrate, cobalt nitrate and iron nitrate were used as oxidizers and citric acid was used as a reducing agent. Structural and morphological properties of the obtained ferrite powders were investigated and characterized by X-ray diffraction (XRD), Raman spectroscopy, Field emission scanning electron microscope (FESEM) and Fourier transform infrared (FT-IR) spectroscopy. Optical properties were investigated by UV-VIS spectrophotometry. A cubic spinel structure with multigrain agglomerates formed. Visible light photocatalytic activity of the spinel ferrite powder samples was evaluated by measuring the rate of photodegradation reaction of methylene blue (MB). After 240 min Co0.1Mg0.9Fe2O4 showed the best rate of photodecomposition of MB resulting in 90% of its initial concentration in an alkaline environment.",
publisher = "Novi Sad : Faculty of Technology",
journal = "Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad",
title = "Visible light photocatalytic activity of nanocrystalline CoxMg1-xFe2O4 (x = 0-1)",
pages = "136-136",
url = "https://hdl.handle.net/21.15107/rcub_dais_6986"
}
Dojčinović, M., Vasiljević, Z. Ž., Vujančević, J., Pavlović, V. P., Marković, S., Tadić, N. B.,& Nikolić, M. V.. (2019). Visible light photocatalytic activity of nanocrystalline CoxMg1-xFe2O4 (x = 0-1). in Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad
Novi Sad : Faculty of Technology., 136-136.
https://hdl.handle.net/21.15107/rcub_dais_6986
Dojčinović M, Vasiljević ZŽ, Vujančević J, Pavlović VP, Marković S, Tadić NB, Nikolić MV. Visible light photocatalytic activity of nanocrystalline CoxMg1-xFe2O4 (x = 0-1). in Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad. 2019;:136-136.
https://hdl.handle.net/21.15107/rcub_dais_6986 .
Dojčinović, Milena, Vasiljević, Zorka Ž., Vujančević, Jelena, Pavlović, Vera P., Marković, Smilja, Tadić, Nenad B., Nikolić, Marina V., "Visible light photocatalytic activity of nanocrystalline CoxMg1-xFe2O4 (x = 0-1)" in Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad (2019):136-136,
https://hdl.handle.net/21.15107/rcub_dais_6986 .

Photocatalytic degradation of methylene blue and oxytetracycline via sol-gel synthesized pseudobrookite

Vasiljević, Zorka Ž.; Dojčinović, Milena; Janković Častvan, Ivona; Vujančević, Jelena; Tadić, Nenad B.; Nikolić, Maria Vesna

(Belgrade : Institute of Technical Sciences of SASA, 2019)

TY  - CONF
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena
AU  - Janković Častvan, Ivona
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Nikolić, Maria Vesna
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6967
AB  - Fe2TiO5 nanoparticles were synthesized by modified sol-gel method using Fe(NO3)3×9H2O and Ti(OC3H7)4 as starting reagents, oxalic acid as chilate agent and cetyltrimethylammonium bromide as surfactant. The aim of this study was to asses the photocatalytic degradaton of water pollutants, methylene blue and the antibiotic Oxytetracycline (OTC) using natural sunlight irradiation. As prepared nanoparticles were characterized by XRD, BET, FESEM and UV-vis DRS. The optimal operating conditions of photocatalytic degradation of water pollutants were achived by changing the pH of the solution and changing the concentration of photocatalyst.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia
T1  - Photocatalytic degradation of methylene blue and oxytetracycline via sol-gel synthesized pseudobrookite
SP  - 70
EP  - 70
UR  - https://hdl.handle.net/21.15107/rcub_dais_6967
ER  - 
@conference{
author = "Vasiljević, Zorka Ž. and Dojčinović, Milena and Janković Častvan, Ivona and Vujančević, Jelena and Tadić, Nenad B. and Nikolić, Maria Vesna",
year = "2019",
abstract = "Fe2TiO5 nanoparticles were synthesized by modified sol-gel method using Fe(NO3)3×9H2O and Ti(OC3H7)4 as starting reagents, oxalic acid as chilate agent and cetyltrimethylammonium bromide as surfactant. The aim of this study was to asses the photocatalytic degradaton of water pollutants, methylene blue and the antibiotic Oxytetracycline (OTC) using natural sunlight irradiation. As prepared nanoparticles were characterized by XRD, BET, FESEM and UV-vis DRS. The optimal operating conditions of photocatalytic degradation of water pollutants were achived by changing the pH of the solution and changing the concentration of photocatalyst.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia",
title = "Photocatalytic degradation of methylene blue and oxytetracycline via sol-gel synthesized pseudobrookite",
pages = "70-70",
url = "https://hdl.handle.net/21.15107/rcub_dais_6967"
}
Vasiljević, Z. Ž., Dojčinović, M., Janković Častvan, I., Vujančević, J., Tadić, N. B.,& Nikolić, M. V.. (2019). Photocatalytic degradation of methylene blue and oxytetracycline via sol-gel synthesized pseudobrookite. in Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 70-70.
https://hdl.handle.net/21.15107/rcub_dais_6967
Vasiljević ZŽ, Dojčinović M, Janković Častvan I, Vujančević J, Tadić NB, Nikolić MV. Photocatalytic degradation of methylene blue and oxytetracycline via sol-gel synthesized pseudobrookite. in Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia. 2019;:70-70.
https://hdl.handle.net/21.15107/rcub_dais_6967 .
Vasiljević, Zorka Ž., Dojčinović, Milena, Janković Častvan, Ivona, Vujančević, Jelena, Tadić, Nenad B., Nikolić, Maria Vesna, "Photocatalytic degradation of methylene blue and oxytetracycline via sol-gel synthesized pseudobrookite" in Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia (2019):70-70,
https://hdl.handle.net/21.15107/rcub_dais_6967 .

Finding optimal conditions and investigating the structure & morphology of cobalt/magnesium ferrite based cubic spinels (CoxMg1-xFe2O4) as photocatalysts

Dojčinović, Milena; Vasiljević, Zorka Ž.; Tadić, Nenad B.; Pavlović, Vera P.; Barišić, Dario; Pajić, Damir; Nikolić, Maria Vesna

(Belgrade : Institute of Technical Sciences of SASA, 2019)

TY  - CONF
AU  - Dojčinović, Milena
AU  - Vasiljević, Zorka Ž.
AU  - Tadić, Nenad B.
AU  - Pavlović, Vera P.
AU  - Barišić, Dario
AU  - Pajić, Damir
AU  - Nikolić, Maria Vesna
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6963
AB  - Cobalt/magnesium ferrites with various mole percentage ratio of the metals (obtained structures are CoxMg1-xFe2O4 with x being 0, 0.1, 0.3, 0.5, 0.7, 0.9, 1.0) were synthesized by sol-gel combustion synthesis using glycine as fuel, following the rules of propellant chemistry. The powders were then sintered at 700 °C for 3 hours. Obtained powders were characterized by X-Ray diffraction (XRD), scanning electron microscopy (SEM), Raman
spectroscopy, UV/vis diffuse reflectance spectroscopy (DRS). Investigation of the magnetic properties was also conducted by vibrating sample magnetometry (VSM). The obtained powders were proved to be phase-pure cubic spinels which formed agglomerated micrograins. Series of photocatalytic experiments of methylene blue degradation were done.
The influence of different experimental conditions was investigated including variations of: pH values, concentrations of the pollutant, masses of the photocatalyst, different light sources and therefore different light irradiation. Interesting results, including enhancement of the degradation rate with the introduction of cobalt into MgFe2O4 and decrease of the degradation rate with further increase of cobalt content and formation of hard agglomerates, open new possibilities for further investigation of the utilisation of Co/Mg ferrites as photocatalysts.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia
T1  - Finding optimal conditions and investigating the structure & morphology of cobalt/magnesium ferrite based cubic spinels (CoxMg1-xFe2O4) as photocatalysts
SP  - 71
EP  - 71
UR  - https://hdl.handle.net/21.15107/rcub_dais_6963
ER  - 
@conference{
author = "Dojčinović, Milena and Vasiljević, Zorka Ž. and Tadić, Nenad B. and Pavlović, Vera P. and Barišić, Dario and Pajić, Damir and Nikolić, Maria Vesna",
year = "2019",
abstract = "Cobalt/magnesium ferrites with various mole percentage ratio of the metals (obtained structures are CoxMg1-xFe2O4 with x being 0, 0.1, 0.3, 0.5, 0.7, 0.9, 1.0) were synthesized by sol-gel combustion synthesis using glycine as fuel, following the rules of propellant chemistry. The powders were then sintered at 700 °C for 3 hours. Obtained powders were characterized by X-Ray diffraction (XRD), scanning electron microscopy (SEM), Raman
spectroscopy, UV/vis diffuse reflectance spectroscopy (DRS). Investigation of the magnetic properties was also conducted by vibrating sample magnetometry (VSM). The obtained powders were proved to be phase-pure cubic spinels which formed agglomerated micrograins. Series of photocatalytic experiments of methylene blue degradation were done.
The influence of different experimental conditions was investigated including variations of: pH values, concentrations of the pollutant, masses of the photocatalyst, different light sources and therefore different light irradiation. Interesting results, including enhancement of the degradation rate with the introduction of cobalt into MgFe2O4 and decrease of the degradation rate with further increase of cobalt content and formation of hard agglomerates, open new possibilities for further investigation of the utilisation of Co/Mg ferrites as photocatalysts.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia",
title = "Finding optimal conditions and investigating the structure & morphology of cobalt/magnesium ferrite based cubic spinels (CoxMg1-xFe2O4) as photocatalysts",
pages = "71-71",
url = "https://hdl.handle.net/21.15107/rcub_dais_6963"
}
Dojčinović, M., Vasiljević, Z. Ž., Tadić, N. B., Pavlović, V. P., Barišić, D., Pajić, D.,& Nikolić, M. V.. (2019). Finding optimal conditions and investigating the structure & morphology of cobalt/magnesium ferrite based cubic spinels (CoxMg1-xFe2O4) as photocatalysts. in Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 71-71.
https://hdl.handle.net/21.15107/rcub_dais_6963
Dojčinović M, Vasiljević ZŽ, Tadić NB, Pavlović VP, Barišić D, Pajić D, Nikolić MV. Finding optimal conditions and investigating the structure & morphology of cobalt/magnesium ferrite based cubic spinels (CoxMg1-xFe2O4) as photocatalysts. in Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia. 2019;:71-71.
https://hdl.handle.net/21.15107/rcub_dais_6963 .
Dojčinović, Milena, Vasiljević, Zorka Ž., Tadić, Nenad B., Pavlović, Vera P., Barišić, Dario, Pajić, Damir, Nikolić, Maria Vesna, "Finding optimal conditions and investigating the structure & morphology of cobalt/magnesium ferrite based cubic spinels (CoxMg1-xFe2O4) as photocatalysts" in Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia (2019):71-71,
https://hdl.handle.net/21.15107/rcub_dais_6963 .

Structure, morphology and photocatalytic properties of CoxMg1-xFe2O4 (0<x<1) spinel ferrites obtained by sol-gel synthesis

Vasiljević, Zorka Ž.; Dojčinović, Milena; Pavlović, Vera P.; Vujančević, Jelena; Tadić, Nenad B.; Nikolić, Maria Vesna

(Belgrade : Materials Research Society of Serbia, 2019)

TY  - CONF
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena
AU  - Pavlović, Vera P.
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Nikolić, Maria Vesna
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6679
AB  - Nanocrystalline cobalt magnesium ferrites with varying cobalt and magnesium content (CoxMg1-xFe2O4, 0<x<1) were synthesized using the sol-gel self-combustion method with citric acid as fuel, followed by calcination at 700 C for 2 hours. Structural characterization was performed using Xray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and Raman spectroscopy. It confirmed the formation of agglomerated nanocrystalline ferrites with an inverse cubic spinel structure. The optical band gap energy was determined using UV/Vis spectrophotometry. It reduced with increased Co content. Visible light photocatalytic activity was tested using natural and artificial light sources through a series of experimental degradations of the methylene blue (MB) solution.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019
T1  - Structure, morphology and photocatalytic properties of CoxMg1-xFe2O4 (0<x<1) spinel ferrites obtained by sol-gel synthesis
SP  - 126
EP  - 126
UR  - https://hdl.handle.net/21.15107/rcub_dais_6679
ER  - 
@conference{
author = "Vasiljević, Zorka Ž. and Dojčinović, Milena and Pavlović, Vera P. and Vujančević, Jelena and Tadić, Nenad B. and Nikolić, Maria Vesna",
year = "2019",
abstract = "Nanocrystalline cobalt magnesium ferrites with varying cobalt and magnesium content (CoxMg1-xFe2O4, 0<x<1) were synthesized using the sol-gel self-combustion method with citric acid as fuel, followed by calcination at 700 C for 2 hours. Structural characterization was performed using Xray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and Raman spectroscopy. It confirmed the formation of agglomerated nanocrystalline ferrites with an inverse cubic spinel structure. The optical band gap energy was determined using UV/Vis spectrophotometry. It reduced with increased Co content. Visible light photocatalytic activity was tested using natural and artificial light sources through a series of experimental degradations of the methylene blue (MB) solution.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019",
title = "Structure, morphology and photocatalytic properties of CoxMg1-xFe2O4 (0<x<1) spinel ferrites obtained by sol-gel synthesis",
pages = "126-126",
url = "https://hdl.handle.net/21.15107/rcub_dais_6679"
}
Vasiljević, Z. Ž., Dojčinović, M., Pavlović, V. P., Vujančević, J., Tadić, N. B.,& Nikolić, M. V.. (2019). Structure, morphology and photocatalytic properties of CoxMg1-xFe2O4 (0<x<1) spinel ferrites obtained by sol-gel synthesis. in Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019
Belgrade : Materials Research Society of Serbia., 126-126.
https://hdl.handle.net/21.15107/rcub_dais_6679
Vasiljević ZŽ, Dojčinović M, Pavlović VP, Vujančević J, Tadić NB, Nikolić MV. Structure, morphology and photocatalytic properties of CoxMg1-xFe2O4 (0<x<1) spinel ferrites obtained by sol-gel synthesis. in Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019. 2019;:126-126.
https://hdl.handle.net/21.15107/rcub_dais_6679 .
Vasiljević, Zorka Ž., Dojčinović, Milena, Pavlović, Vera P., Vujančević, Jelena, Tadić, Nenad B., Nikolić, Maria Vesna, "Structure, morphology and photocatalytic properties of CoxMg1-xFe2O4 (0<x<1) spinel ferrites obtained by sol-gel synthesis" in Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019 (2019):126-126,
https://hdl.handle.net/21.15107/rcub_dais_6679 .

The effect of pH on visible-light photocatalytic properties of pseudobrookite nanoparticles

Vasiljević, Zorka Ž.; Dojčinović, Milena; Vujančević, Jelena; Tadić, Nenad B.; Nikolić, Maria Vesna

(Belgrade : Materials Research Society of Serbia, 2019)

TY  - CONF
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Nikolić, Maria Vesna
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6673
AB  - In this study, pseudobrookite (Fe2TiO5) nanoparticles were fabricated by a modified sol-gel method using Fe(NO3)39H2O and Ti(OC3H7)4 as starting reagents and ethanol as solvent. Oxalic acid was used as a chelating agent while cetyltrimethyammonium bromide (CTAB) and citric monohydrate were used as surfactants. Structral and morphological characterization using X-Ray Diffraction (XRD) and Field Emission Scanning Electron Microscopy (FESEM) analysis confirmed the formation of pseudobrookite nanoparticles. As synthetized Fe2TiO5 nanoparticles were utilized as photocatalysts for decolorisation of Methylene blue (MB) under visible light irradiation. It was observed that the adsorption of MB onto Fe2TiO5 nanoparticles is strongly dependent on the solution pH. Maximum decolorozation was observed for Fe2TiO5 nanoparticles prepared with CTAB under alcaline conditions (pH=10.5).
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019
T1  - The effect of pH on visible-light photocatalytic properties of pseudobrookite nanoparticles
SP  - 130
EP  - 130
UR  - https://hdl.handle.net/21.15107/rcub_dais_6673
ER  - 
@conference{
author = "Vasiljević, Zorka Ž. and Dojčinović, Milena and Vujančević, Jelena and Tadić, Nenad B. and Nikolić, Maria Vesna",
year = "2019",
abstract = "In this study, pseudobrookite (Fe2TiO5) nanoparticles were fabricated by a modified sol-gel method using Fe(NO3)39H2O and Ti(OC3H7)4 as starting reagents and ethanol as solvent. Oxalic acid was used as a chelating agent while cetyltrimethyammonium bromide (CTAB) and citric monohydrate were used as surfactants. Structral and morphological characterization using X-Ray Diffraction (XRD) and Field Emission Scanning Electron Microscopy (FESEM) analysis confirmed the formation of pseudobrookite nanoparticles. As synthetized Fe2TiO5 nanoparticles were utilized as photocatalysts for decolorisation of Methylene blue (MB) under visible light irradiation. It was observed that the adsorption of MB onto Fe2TiO5 nanoparticles is strongly dependent on the solution pH. Maximum decolorozation was observed for Fe2TiO5 nanoparticles prepared with CTAB under alcaline conditions (pH=10.5).",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019",
title = "The effect of pH on visible-light photocatalytic properties of pseudobrookite nanoparticles",
pages = "130-130",
url = "https://hdl.handle.net/21.15107/rcub_dais_6673"
}
Vasiljević, Z. Ž., Dojčinović, M., Vujančević, J., Tadić, N. B.,& Nikolić, M. V.. (2019). The effect of pH on visible-light photocatalytic properties of pseudobrookite nanoparticles. in Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019
Belgrade : Materials Research Society of Serbia., 130-130.
https://hdl.handle.net/21.15107/rcub_dais_6673
Vasiljević ZŽ, Dojčinović M, Vujančević J, Tadić NB, Nikolić MV. The effect of pH on visible-light photocatalytic properties of pseudobrookite nanoparticles. in Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019. 2019;:130-130.
https://hdl.handle.net/21.15107/rcub_dais_6673 .
Vasiljević, Zorka Ž., Dojčinović, Milena, Vujančević, Jelena, Tadić, Nenad B., Nikolić, Maria Vesna, "The effect of pH on visible-light photocatalytic properties of pseudobrookite nanoparticles" in Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019 (2019):130-130,
https://hdl.handle.net/21.15107/rcub_dais_6673 .

Effect of chemical composition on microstructural properties and sintering kinetics of (Ba,Sr)TiO3 powders

Kosanović, Darko; Blagojević, Vladimir A.; Labus, Nebojša; Tadić, Nenad B.; Pavlović, Vladimir B.; Ristić, Momčilo M.

(Belgrade : ETRAN, 2018)

TY  - JOUR
AU  - Kosanović, Darko
AU  - Blagojević, Vladimir A.
AU  - Labus, Nebojša
AU  - Tadić, Nenad B.
AU  - Pavlović, Vladimir B.
AU  - Ristić, Momčilo M.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/4080
AB  - Barium strontium titanate powders with different Ba:Sr ratios were investigated to determine the influence of the initial composition of powder mixture on microstructural properties and sintering kinetics. It was determined that BaCO3 and SrCO3 react differently to mixing, resulting in Ba0.5Sr0.5CO3 in the sample with 80% Ba and different contents of Ba1-xSrxTiO3 in samples with 50% and 20% Ba. In addition, the morphology is also different, with higher Sr content leading to larger particles size and less agglomeration. The different chemical content of the initial powder mixture also has a marked impact on the sintering process: the onset of sintering shifts towards higher temperature with higher Sr content, while the average apparent activation energy of sintering is the highest for the sample with 80% Ba and the lowest for the mixture with 50% Ba. In addition, hexagonal-to-cubic phase transformation was observed in parallel with the sintering process, where the position of the phase transition shifts to lower temperatures with an increase in Sr content. This is consistent with the behavior of low-temperature phase transitions of BST. The phase transition was not observed in sintered samples, suggesting that there is a size-dependence of the phase transition temperature. © 2016 Authors.
PB  - Belgrade : ETRAN
T2  - Science of Sintering
T1  - Effect of chemical composition on microstructural properties and sintering kinetics of (Ba,Sr)TiO3 powders
SP  - 29
EP  - 38
VL  - 50
IS  - 1
DO  - 10.2298/SOS1801029K
UR  - https://hdl.handle.net/21.15107/rcub_dais_4080
ER  - 
@article{
author = "Kosanović, Darko and Blagojević, Vladimir A. and Labus, Nebojša and Tadić, Nenad B. and Pavlović, Vladimir B. and Ristić, Momčilo M.",
year = "2018",
abstract = "Barium strontium titanate powders with different Ba:Sr ratios were investigated to determine the influence of the initial composition of powder mixture on microstructural properties and sintering kinetics. It was determined that BaCO3 and SrCO3 react differently to mixing, resulting in Ba0.5Sr0.5CO3 in the sample with 80% Ba and different contents of Ba1-xSrxTiO3 in samples with 50% and 20% Ba. In addition, the morphology is also different, with higher Sr content leading to larger particles size and less agglomeration. The different chemical content of the initial powder mixture also has a marked impact on the sintering process: the onset of sintering shifts towards higher temperature with higher Sr content, while the average apparent activation energy of sintering is the highest for the sample with 80% Ba and the lowest for the mixture with 50% Ba. In addition, hexagonal-to-cubic phase transformation was observed in parallel with the sintering process, where the position of the phase transition shifts to lower temperatures with an increase in Sr content. This is consistent with the behavior of low-temperature phase transitions of BST. The phase transition was not observed in sintered samples, suggesting that there is a size-dependence of the phase transition temperature. © 2016 Authors.",
publisher = "Belgrade : ETRAN",
journal = "Science of Sintering",
title = "Effect of chemical composition on microstructural properties and sintering kinetics of (Ba,Sr)TiO3 powders",
pages = "29-38",
volume = "50",
number = "1",
doi = "10.2298/SOS1801029K",
url = "https://hdl.handle.net/21.15107/rcub_dais_4080"
}
Kosanović, D., Blagojević, V. A., Labus, N., Tadić, N. B., Pavlović, V. B.,& Ristić, M. M.. (2018). Effect of chemical composition on microstructural properties and sintering kinetics of (Ba,Sr)TiO3 powders. in Science of Sintering
Belgrade : ETRAN., 50(1), 29-38.
https://doi.org/10.2298/SOS1801029K
https://hdl.handle.net/21.15107/rcub_dais_4080
Kosanović D, Blagojević VA, Labus N, Tadić NB, Pavlović VB, Ristić MM. Effect of chemical composition on microstructural properties and sintering kinetics of (Ba,Sr)TiO3 powders. in Science of Sintering. 2018;50(1):29-38.
doi:10.2298/SOS1801029K
https://hdl.handle.net/21.15107/rcub_dais_4080 .
Kosanović, Darko, Blagojević, Vladimir A., Labus, Nebojša, Tadić, Nenad B., Pavlović, Vladimir B., Ristić, Momčilo M., "Effect of chemical composition on microstructural properties and sintering kinetics of (Ba,Sr)TiO3 powders" in Science of Sintering, 50, no. 1 (2018):29-38,
https://doi.org/10.2298/SOS1801029K .,
https://hdl.handle.net/21.15107/rcub_dais_4080 .
1
7
7

Influence of prolonged sintering time on density and electrical properties of isothermally sintered cordierite-based ceramics

Peleš, Adriana; Đorđević, Nataša; Obradović, Nina; Tadić, Nenad B.; Pavlović, Vladimir B.

(Belgrade : International Institute for the Science of Sintering, 2013)

TY  - JOUR
AU  - Peleš, Adriana
AU  - Đorđević, Nataša
AU  - Obradović, Nina
AU  - Tadić, Nenad B.
AU  - Pavlović, Vladimir B.
PY  - 2013
UR  - http://dais.sanu.ac.rs/123456789/188
AB  - Mechanical activation is a commonly used and relatively fast and inexpensive procedure for sample preparation before the sintering process. Cordierite, a stoichiometric mixture of three different oxides (2MgO⋅2Al2O3⋅5SiO2) is a very attractive, widely used high-temperature ceramic material. The mechanical activation of the starting mixtures with 5.00 mass% TiO2 was performed in a high energy ball mill during 10-80 min. The applied compaction pressure before the sintering process was 2t/cm2, based on our recent investigation. The sintering process was performed at 1350oC for 2h and 4h in air atmosphere. X-ray diffraction was used to analyze the phase composition of non-activated and 80 min activated samples, sintered for 2 and 4h, respectively. Scanning electron microscopy was performed to analyze the microstructure of both compacted and sintered samples. Atomic force microscope was used to investigate the surface of the sintered samples. This paper investigates the influence of prolonged sintering time on the densities of the sintered samples, along with electrical properties. [Projekat Ministarstva nauke Republike Srbije, br. OI 172057]
PB  - Belgrade : International Institute for the Science of Sintering
T2  - Science of Sintering
T1  - Influence of prolonged sintering time on density and electrical properties of isothermally sintered cordierite-based ceramics
SP  - 157
EP  - 164
VL  - 45
IS  - 2
DO  - 10.2298/SOS1302157P
UR  - https://hdl.handle.net/21.15107/rcub_dais_188
ER  - 
@article{
author = "Peleš, Adriana and Đorđević, Nataša and Obradović, Nina and Tadić, Nenad B. and Pavlović, Vladimir B.",
year = "2013",
abstract = "Mechanical activation is a commonly used and relatively fast and inexpensive procedure for sample preparation before the sintering process. Cordierite, a stoichiometric mixture of three different oxides (2MgO⋅2Al2O3⋅5SiO2) is a very attractive, widely used high-temperature ceramic material. The mechanical activation of the starting mixtures with 5.00 mass% TiO2 was performed in a high energy ball mill during 10-80 min. The applied compaction pressure before the sintering process was 2t/cm2, based on our recent investigation. The sintering process was performed at 1350oC for 2h and 4h in air atmosphere. X-ray diffraction was used to analyze the phase composition of non-activated and 80 min activated samples, sintered for 2 and 4h, respectively. Scanning electron microscopy was performed to analyze the microstructure of both compacted and sintered samples. Atomic force microscope was used to investigate the surface of the sintered samples. This paper investigates the influence of prolonged sintering time on the densities of the sintered samples, along with electrical properties. [Projekat Ministarstva nauke Republike Srbije, br. OI 172057]",
publisher = "Belgrade : International Institute for the Science of Sintering",
journal = "Science of Sintering",
title = "Influence of prolonged sintering time on density and electrical properties of isothermally sintered cordierite-based ceramics",
pages = "157-164",
volume = "45",
number = "2",
doi = "10.2298/SOS1302157P",
url = "https://hdl.handle.net/21.15107/rcub_dais_188"
}
Peleš, A., Đorđević, N., Obradović, N., Tadić, N. B.,& Pavlović, V. B.. (2013). Influence of prolonged sintering time on density and electrical properties of isothermally sintered cordierite-based ceramics. in Science of Sintering
Belgrade : International Institute for the Science of Sintering., 45(2), 157-164.
https://doi.org/10.2298/SOS1302157P
https://hdl.handle.net/21.15107/rcub_dais_188
Peleš A, Đorđević N, Obradović N, Tadić NB, Pavlović VB. Influence of prolonged sintering time on density and electrical properties of isothermally sintered cordierite-based ceramics. in Science of Sintering. 2013;45(2):157-164.
doi:10.2298/SOS1302157P
https://hdl.handle.net/21.15107/rcub_dais_188 .
Peleš, Adriana, Đorđević, Nataša, Obradović, Nina, Tadić, Nenad B., Pavlović, Vladimir B., "Influence of prolonged sintering time on density and electrical properties of isothermally sintered cordierite-based ceramics" in Science of Sintering, 45, no. 2 (2013):157-164,
https://doi.org/10.2298/SOS1302157P .,
https://hdl.handle.net/21.15107/rcub_dais_188 .
4
6
5