Mitrović, Nebojša S.

Link to this page

Authority KeyName Variants
6d00b5a9-53a2-4750-b16c-2bfff174dbd1
  • Mitrović, Nebojša S. (3)
  • Mitrović, Nebojša (1)
Projects

Author's Bibliography

Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure

Filipović, Suzana; Pavlović, Vera P.; Mitrić, Miodrag; Lević, Steva; Mitrović, Nebojša; Maričić, Aleksa; Vlahović, Branislav; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Lević, Steva
AU  - Mitrović, Nebojša
AU  - Maričić, Aleksa
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.
PB  - Springer
T2  - Journal of Advanced Ceramics
T1  - Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure
SP  - 133
EP  - 147
VL  - 8
IS  - 1
DO  - 10.1007/s40145-018-0301-5
UR  - https://hdl.handle.net/21.15107/rcub_dais_5271
ER  - 
@article{
author = "Filipović, Suzana and Pavlović, Vera P. and Mitrić, Miodrag and Lević, Steva and Mitrović, Nebojša and Maričić, Aleksa and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.",
publisher = "Springer",
journal = "Journal of Advanced Ceramics",
title = "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure",
pages = "133-147",
volume = "8",
number = "1",
doi = "10.1007/s40145-018-0301-5",
url = "https://hdl.handle.net/21.15107/rcub_dais_5271"
}
Filipović, S., Pavlović, V. P., Mitrić, M., Lević, S., Mitrović, N., Maričić, A., Vlahović, B.,& Pavlović, V. B. (2019). Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure.
Journal of Advanced Ceramics
Springer., 8(1), 133-147.
https://doi.org/10.1007/s40145-018-0301-5
Filipović S, Pavlović VP, Mitrić M, Lević S, Mitrović N, Maričić A, Vlahović B, Pavlović VB. Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. Journal of Advanced Ceramics. 2019;8(1):133-147.
doi:10.1007/s40145-018-0301-5.
Filipović Suzana, Pavlović Vera P., Mitrić Miodrag, Lević Steva, Mitrović Nebojša, Maričić Aleksa, Vlahović Branislav, Pavlović Vladimir B., "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure" Journal of Advanced Ceramics, 8, no. 1 (2019):133-147,
https://doi.org/10.1007/s40145-018-0301-5 .
1
4
3
6

Three-Axis’ Heat Loss Anemometer Comprising Thick-Film Segmented Thermistors

Aleksić, Stanko O.; Mitrović, Nebojša S.; Nikolić, Zoran; Luković, Miloljub D.; Obradović, Nina; Luković, Snežana G.

(IEEE, 2019)

TY  - JOUR
AU  - Aleksić, Stanko O.
AU  - Mitrović, Nebojša S.
AU  - Nikolić, Zoran
AU  - Luković, Miloljub D.
AU  - Obradović, Nina
AU  - Luković, Snežana G.
PY  - 2019
AB  - NTC thick-film segmented thermistors were used as anemometer sensing devices. They were screen printed of thick-film thermistor paste based on modified NiMn2O4 fine powder, organic vehicle, and glass frit. Their electrical properties, such as resistance vs. temperature R(T) and thermistor exponential factor B were obtained using measurements in the climatic test chamber. A uniaxial anemometer was formed using a thick-film segmented thermistor, which was placed in the hole drilled in rectangular piece of thermally insulating material. The uniaxial anemometer was used for the optimization of operating point of segmented thermistors as self-heating/wind sensing devices. The dc supply voltage was correlated with the air temperature sub-ranges (RCV). The power save mode such as 30s self-heating/5 min pause was used to measure the thermistor response on stable wind blow. The three-axis' anemometer was formed using five sensor devices placed in five holes drilled in the cubical piece of thermally insulating material: three thermistor sensors measure wind speed on the x, y, z - axes, the fourth sensor Pt 1000 measures the air temperature T, while the fifth sensor (capacitive type) measures humidity H. The obtained sensitivity and inaccuracy were compared with respective ones of other anemometers.
PB  - IEEE
T2  - IEEE Sensors Journal
T1  - Three-Axis’ Heat Loss Anemometer Comprising Thick-Film Segmented Thermistors
SP  - 10228
EP  - 10235
VL  - 19
IS  - 22
DO  - 10.1109/JSEN.2019.2929356
ER  - 
@article{
author = "Aleksić, Stanko O. and Mitrović, Nebojša S. and Nikolić, Zoran and Luković, Miloljub D. and Obradović, Nina and Luković, Snežana G.",
year = "2019",
abstract = "NTC thick-film segmented thermistors were used as anemometer sensing devices. They were screen printed of thick-film thermistor paste based on modified NiMn2O4 fine powder, organic vehicle, and glass frit. Their electrical properties, such as resistance vs. temperature R(T) and thermistor exponential factor B were obtained using measurements in the climatic test chamber. A uniaxial anemometer was formed using a thick-film segmented thermistor, which was placed in the hole drilled in rectangular piece of thermally insulating material. The uniaxial anemometer was used for the optimization of operating point of segmented thermistors as self-heating/wind sensing devices. The dc supply voltage was correlated with the air temperature sub-ranges (RCV). The power save mode such as 30s self-heating/5 min pause was used to measure the thermistor response on stable wind blow. The three-axis' anemometer was formed using five sensor devices placed in five holes drilled in the cubical piece of thermally insulating material: three thermistor sensors measure wind speed on the x, y, z - axes, the fourth sensor Pt 1000 measures the air temperature T, while the fifth sensor (capacitive type) measures humidity H. The obtained sensitivity and inaccuracy were compared with respective ones of other anemometers.",
publisher = "IEEE",
journal = "IEEE Sensors Journal",
title = "Three-Axis’ Heat Loss Anemometer Comprising Thick-Film Segmented Thermistors",
pages = "10228-10235",
volume = "19",
number = "22",
doi = "10.1109/JSEN.2019.2929356"
}
Aleksić, S. O., Mitrović, N. S., Nikolić, Z., Luković, M. D., Obradović, N.,& Luković, S. G. (2019). Three-Axis’ Heat Loss Anemometer Comprising Thick-Film Segmented Thermistors.
IEEE Sensors Journal
IEEE., 19(22), 10228-10235.
https://doi.org/10.1109/JSEN.2019.2929356
Aleksić SO, Mitrović NS, Nikolić Z, Luković MD, Obradović N, Luković SG. Three-Axis’ Heat Loss Anemometer Comprising Thick-Film Segmented Thermistors. IEEE Sensors Journal. 2019;19(22):10228-10235.
doi:10.1109/JSEN.2019.2929356.
Aleksić Stanko O., Mitrović Nebojša S., Nikolić Zoran, Luković Miloljub D., Obradović Nina, Luković Snežana G., "Three-Axis’ Heat Loss Anemometer Comprising Thick-Film Segmented Thermistors" IEEE Sensors Journal, 19, no. 22 (2019):10228-10235,
https://doi.org/10.1109/JSEN.2019.2929356 .

Three-Axis’ Heat Loss Anemometer Comprising Thick-Film Segmented Thermistors

Aleksić, Stanko O.; Mitrović, Nebojša S.; Nikolić, Zoran; Luković, Miloljub D.; Obradović, Nina; Luković, Snežana G.

(IEEE, 2019)

TY  - JOUR
AU  - Aleksić, Stanko O.
AU  - Mitrović, Nebojša S.
AU  - Nikolić, Zoran
AU  - Luković, Miloljub D.
AU  - Obradović, Nina
AU  - Luković, Snežana G.
PY  - 2019
AB  - NTC thick-film segmented thermistors were used as anemometer sensing devices. They were screen printed of thick-film thermistor paste based on modified NiMn2O4 fine powder, organic vehicle, and glass frit. Their electrical properties, such as resistance vs. temperature R(T) and thermistor exponential factor B were obtained using measurements in the climatic test chamber. A uniaxial anemometer was formed using a thick-film segmented thermistor, which was placed in the hole drilled in rectangular piece of thermally insulating material. The uniaxial anemometer was used for the optimization of operating point of segmented thermistors as self-heating/wind sensing devices. The dc supply voltage was correlated with the air temperature sub-ranges (RCV). The power save mode such as 30s self-heating/5 min pause was used to measure the thermistor response on stable wind blow. The three-axis' anemometer was formed using five sensor devices placed in five holes drilled in the cubical piece of thermally insulating material: three thermistor sensors measure wind speed on the x, y, z - axes, the fourth sensor Pt 1000 measures the air temperature T, while the fifth sensor (capacitive type) measures humidity H. The obtained sensitivity and inaccuracy were compared with respective ones of other anemometers.
PB  - IEEE
T2  - IEEE Sensors Journal
T1  - Three-Axis’ Heat Loss Anemometer Comprising Thick-Film Segmented Thermistors
SP  - 10228
EP  - 10235
VL  - 19
IS  - 22
DO  - 10.1109/JSEN.2019.2929356
ER  - 
@article{
author = "Aleksić, Stanko O. and Mitrović, Nebojša S. and Nikolić, Zoran and Luković, Miloljub D. and Obradović, Nina and Luković, Snežana G.",
year = "2019",
abstract = "NTC thick-film segmented thermistors were used as anemometer sensing devices. They were screen printed of thick-film thermistor paste based on modified NiMn2O4 fine powder, organic vehicle, and glass frit. Their electrical properties, such as resistance vs. temperature R(T) and thermistor exponential factor B were obtained using measurements in the climatic test chamber. A uniaxial anemometer was formed using a thick-film segmented thermistor, which was placed in the hole drilled in rectangular piece of thermally insulating material. The uniaxial anemometer was used for the optimization of operating point of segmented thermistors as self-heating/wind sensing devices. The dc supply voltage was correlated with the air temperature sub-ranges (RCV). The power save mode such as 30s self-heating/5 min pause was used to measure the thermistor response on stable wind blow. The three-axis' anemometer was formed using five sensor devices placed in five holes drilled in the cubical piece of thermally insulating material: three thermistor sensors measure wind speed on the x, y, z - axes, the fourth sensor Pt 1000 measures the air temperature T, while the fifth sensor (capacitive type) measures humidity H. The obtained sensitivity and inaccuracy were compared with respective ones of other anemometers.",
publisher = "IEEE",
journal = "IEEE Sensors Journal",
title = "Three-Axis’ Heat Loss Anemometer Comprising Thick-Film Segmented Thermistors",
pages = "10228-10235",
volume = "19",
number = "22",
doi = "10.1109/JSEN.2019.2929356"
}
Aleksić, S. O., Mitrović, N. S., Nikolić, Z., Luković, M. D., Obradović, N.,& Luković, S. G. (2019). Three-Axis’ Heat Loss Anemometer Comprising Thick-Film Segmented Thermistors.
IEEE Sensors Journal
IEEE., 19(22), 10228-10235.
https://doi.org/10.1109/JSEN.2019.2929356
Aleksić SO, Mitrović NS, Nikolić Z, Luković MD, Obradović N, Luković SG. Three-Axis’ Heat Loss Anemometer Comprising Thick-Film Segmented Thermistors. IEEE Sensors Journal. 2019;19(22):10228-10235.
doi:10.1109/JSEN.2019.2929356.
Aleksić Stanko O., Mitrović Nebojša S., Nikolić Zoran, Luković Miloljub D., Obradović Nina, Luković Snežana G., "Three-Axis’ Heat Loss Anemometer Comprising Thick-Film Segmented Thermistors" IEEE Sensors Journal, 19, no. 22 (2019):10228-10235,
https://doi.org/10.1109/JSEN.2019.2929356 .

Primena debeloslojnih segmentiranih termistora za merenje i analizu temperaturnog profila gornjeg sloja zemlje

Aleksić, Stanko O.; Mitrović, Nebojša S.; Luković, Miloljub D.; Luković, Snežana G.; Obradović, Nina

(Beograd : Savez inženjera i tehničara Srbije, 2018)

TY  - JOUR
AU  - Aleksić, Stanko O.
AU  - Mitrović, Nebojša S.
AU  - Luković, Miloljub D.
AU  - Luković, Snežana G.
AU  - Obradović, Nina
PY  - 2018
AB  - A new sensor for measuring ground top layer temperature profile was formed as a row of 40 thermistor segments connected in series, with which the change of temperature in the soil is mesaured and placed on 550 mm depth. The temperature sensor is multiple protected of humidity, calibrated on room temperature and placed vertically in the hole drilled on the lawn. The main electrical properties of the new sensor based on NTC thick film segmented thermistors are given in brief. The ground top layer temperature profile measurements were done in 40 points at 7am and 2 pm each day from the beginning of November 2017 to the end of February 2018.At the same time and in the same period of time the air temperature were measured and recorded. The results of measurements of ground top layer temperatureT(t,z) were given in daily and monthly diagrams as a function of time t and ground deepness d on z-axis. The correlation between ground top layer temperature profile and air temperature was analyzed: changes of ground temperature gradient and effect of precipitations on ground temperature profile. The results obtained enable study of temperature regime of ground top layer.
AB  - Novi senzor temperaturnog profila gornjeg sloja zemlje, formiran je kao niz od 40 termistorskih segmenata redno vezanih, kojim se meri promena temperature, u zemlji do dubine d=550 mm. Temperaturni senzor je višestruko zaštićen od vlage, kalibrisan na sobnoj temperaturi i postavljen u vertikalno izbušenu rupu na travnjaku. Osnovne električne karakteristike novog senzora na bazi NTC debeloslojnih segmentiranih termistora date su ukratko. Merenje temperaturnog profila gornjeg sloja zemlje u 40 tačaka vršeno je u 7 i u 14 časova od početka novembra 2017. do kraja februara 2018. godine. U tom periodu u istim terminima merena je i temperatura vazduha. Rezultati merenja temperature gornjeg sloja zemlje T(t,z) prikazani su dijagramima sa dnevnim i mesečnim pregledom kao funkcija vremena t i dubine zemlje d po z-osi. Analizirana je korelacija između temperature gornjeg sloja zemlje i vazduha: promena gradijenta temperature tla i uticaj padavina na temperaturni profil. Dobijeni rezultati omogućavaju dalje proučavanje temperaturnog režima gornjeg sloja zemlje.
PB  - Beograd : Savez inženjera i tehničara Srbije
T2  - Tehnika
T1  - Primena debeloslojnih segmentiranih termistora za merenje i analizu temperaturnog profila gornjeg sloja zemlje
T1  - Application of thick film segmented thermistors for measurement and analysis of ground top layer temperature profile
SP  - 533
EP  - 538
VL  - 73
IS  - 4
DO  - 10.5937/tehnika1804533A
UR  - https://hdl.handle.net/21.15107/rcub_dais_4539
ER  - 
@article{
author = "Aleksić, Stanko O. and Mitrović, Nebojša S. and Luković, Miloljub D. and Luković, Snežana G. and Obradović, Nina",
year = "2018",
abstract = "A new sensor for measuring ground top layer temperature profile was formed as a row of 40 thermistor segments connected in series, with which the change of temperature in the soil is mesaured and placed on 550 mm depth. The temperature sensor is multiple protected of humidity, calibrated on room temperature and placed vertically in the hole drilled on the lawn. The main electrical properties of the new sensor based on NTC thick film segmented thermistors are given in brief. The ground top layer temperature profile measurements were done in 40 points at 7am and 2 pm each day from the beginning of November 2017 to the end of February 2018.At the same time and in the same period of time the air temperature were measured and recorded. The results of measurements of ground top layer temperatureT(t,z) were given in daily and monthly diagrams as a function of time t and ground deepness d on z-axis. The correlation between ground top layer temperature profile and air temperature was analyzed: changes of ground temperature gradient and effect of precipitations on ground temperature profile. The results obtained enable study of temperature regime of ground top layer., Novi senzor temperaturnog profila gornjeg sloja zemlje, formiran je kao niz od 40 termistorskih segmenata redno vezanih, kojim se meri promena temperature, u zemlji do dubine d=550 mm. Temperaturni senzor je višestruko zaštićen od vlage, kalibrisan na sobnoj temperaturi i postavljen u vertikalno izbušenu rupu na travnjaku. Osnovne električne karakteristike novog senzora na bazi NTC debeloslojnih segmentiranih termistora date su ukratko. Merenje temperaturnog profila gornjeg sloja zemlje u 40 tačaka vršeno je u 7 i u 14 časova od početka novembra 2017. do kraja februara 2018. godine. U tom periodu u istim terminima merena je i temperatura vazduha. Rezultati merenja temperature gornjeg sloja zemlje T(t,z) prikazani su dijagramima sa dnevnim i mesečnim pregledom kao funkcija vremena t i dubine zemlje d po z-osi. Analizirana je korelacija između temperature gornjeg sloja zemlje i vazduha: promena gradijenta temperature tla i uticaj padavina na temperaturni profil. Dobijeni rezultati omogućavaju dalje proučavanje temperaturnog režima gornjeg sloja zemlje.",
publisher = "Beograd : Savez inženjera i tehničara Srbije",
journal = "Tehnika",
title = "Primena debeloslojnih segmentiranih termistora za merenje i analizu temperaturnog profila gornjeg sloja zemlje, Application of thick film segmented thermistors for measurement and analysis of ground top layer temperature profile",
pages = "533-538",
volume = "73",
number = "4",
doi = "10.5937/tehnika1804533A",
url = "https://hdl.handle.net/21.15107/rcub_dais_4539"
}
Aleksić, S. O., Mitrović, N. S., Luković, M. D., Luković, S. G.,& Obradović, N. (2018). Application of thick film segmented thermistors for measurement and analysis of ground top layer temperature profile.
Tehnika
Beograd : Savez inženjera i tehničara Srbije., 73(4), 533-538.
https://doi.org/10.5937/tehnika1804533A
Aleksić SO, Mitrović NS, Luković MD, Luković SG, Obradović N. Application of thick film segmented thermistors for measurement and analysis of ground top layer temperature profile. Tehnika. 2018;73(4):533-538.
doi:10.5937/tehnika1804533A.
Aleksić Stanko O., Mitrović Nebojša S., Luković Miloljub D., Luković Snežana G., Obradović Nina, "Application of thick film segmented thermistors for measurement and analysis of ground top layer temperature profile" Tehnika, 73, no. 4 (2018):533-538,
https://doi.org/10.5937/tehnika1804533A .