TY  - CONF
AU  - Ivanović, Marija D.
AU  - Đukić, Dunja
AU  - Mladenović, Nataša
AU  - Kljajević, Ljiljana M.
AU  - Pavlović, Vladimir B.
AU  - Nenadović, Snežana S.
AU  - Mirković, Miljana M.
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/6965
AB  - In order to optimize process of geopolymerization, the investigation of thermodynamic parameters of alkali activators are important. The aim of this research was to investigate the influence of thermodynamic parameters (density, viscosity, refractive index and sound velocity) of alkaline activators on mechanical properties (compressive strength and hardness) of synthesized geopolymer samples. Geopolymers were synthetized by alkaline activation of metakaolin, having the density 2.524 g/cm3, using the activators at elevated temperature of 60 oC for two days. Based on the obtained results thermodynamic properties has been selected to predict the properties of materials. Four series of alkaline activators have been used. Activators remarked as AA1, AA2, AA3 and AA4 present the mixtures of Na2SiO3 and solutions of NaOH, of different molarities 2M, 4M, 6M and 8M respectively. The volume ratio of Na2SiO3 and aqueous solution of NaOH was the same for all samples. Densities, viscosities and refractive indices of alkaline activators were determined over the temperature range 15-60 oC of process of geopolymerizations. The values of density, viscosity and refractive index decrease with temperature increase over the investigated temperature range. Increasing molarity of alkali activator solutions, the sound velocity of activators is changed. For sample AA2 the values of sound velocity rises from room temperature to 45 °C and then begins to decrease while for the sample AA3 sound velocity grows until 30 °C and then starts to decrease with further increasing of temperature. Four series of geopolymer samples GP1 to GP4 were synthesiyed using the constant ratio of solid and liquid phase. FTIR, XRD, SEM-EDS methods were used for physicochemical further characterization of geopolymer samples.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia
T1  - The influence of thermodynamic parameters of the alkaline activator on the mechanical properties of geopolymers
SP  - 87
EP  - 87
UR  - https://hdl.handle.net/21.15107/rcub_dais_6965
ER  - 

@conference{
author = "Ivanović, Marija D. and Đukić, Dunja and Mladenović, Nataša and Kljajević, Ljiljana M. and Pavlović, Vladimir B. and Nenadović, Snežana S. and Mirković, Miljana M.",
year = "2019",
abstract = "In order to optimize process of geopolymerization, the investigation of thermodynamic parameters of alkali activators are important. The aim of this research was to investigate the influence of thermodynamic parameters (density, viscosity, refractive index and sound velocity) of alkaline activators on mechanical properties (compressive strength and hardness) of synthesized geopolymer samples. Geopolymers were synthetized by alkaline activation of metakaolin, having the density 2.524 g/cm3, using the activators at elevated temperature of 60 oC for two days. Based on the obtained results thermodynamic properties has been selected to predict the properties of materials. Four series of alkaline activators have been used. Activators remarked as AA1, AA2, AA3 and AA4 present the mixtures of Na2SiO3 and solutions of NaOH, of different molarities 2M, 4M, 6M and 8M respectively. The volume ratio of Na2SiO3 and aqueous solution of NaOH was the same for all samples. Densities, viscosities and refractive indices of alkaline activators were determined over the temperature range 15-60 oC of process of geopolymerizations. The values of density, viscosity and refractive index decrease with temperature increase over the investigated temperature range. Increasing molarity of alkali activator solutions, the sound velocity of activators is changed. For sample AA2 the values of sound velocity rises from room temperature to 45 °C and then begins to decrease while for the sample AA3 sound velocity grows until 30 °C and then starts to decrease with further increasing of temperature. Four series of geopolymer samples GP1 to GP4 were synthesiyed using the constant ratio of solid and liquid phase. FTIR, XRD, SEM-EDS methods were used for physicochemical further characterization of geopolymer samples.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia",
title = "The influence of thermodynamic parameters of the alkaline activator on the mechanical properties of geopolymers",
pages = "87-87",
url = "https://hdl.handle.net/21.15107/rcub_dais_6965"
}

Ivanović, M. D., Đukić, D., Mladenović, N., Kljajević, L. M., Pavlović, V. B., Nenadović, S. S.,& Mirković, M. M.. (2019). The influence of thermodynamic parameters of the alkaline activator on the mechanical properties of geopolymers. in Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 87-87.
https://hdl.handle.net/21.15107/rcub_dais_6965

Ivanović MD, Đukić D, Mladenović N, Kljajević LM, Pavlović VB, Nenadović SS, Mirković MM. The influence of thermodynamic parameters of the alkaline activator on the mechanical properties of geopolymers. in Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia. 2019;:87-87.
https://hdl.handle.net/21.15107/rcub_dais_6965 .

Ivanović, Marija D., Đukić, Dunja, Mladenović, Nataša, Kljajević, Ljiljana M., Pavlović, Vladimir B., Nenadović, Snežana S., Mirković, Miljana M., "The influence of thermodynamic parameters of the alkaline activator on the mechanical properties of geopolymers" in Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia (2019):87-87,
https://hdl.handle.net/21.15107/rcub_dais_6965 .

TY  - CONF
AU  - Ivanović, Marija
AU  - Mladenović, Nataša
AU  - Gulicovski, Jelena
AU  - Pavlović, Vladimir B.
AU  - Pavlović, Vera P.
AU  - Kljajević, Ljiljana M.
AU  - Nenadović, Snežana S.
PY  - 2018
UR  - https://dais.sanu.ac.rs/123456789/4116
AB  - Considering geopolymers as inorganic polymers, they are actually amorphous network of interlinked silicate and aluminate groups, so they could be prospective ceramic precursors for materials with defined dimensions obtained by casting and firing, but not from powder processing. In this research, the starting material is metakaolin, which was obtained by calcining domes tic kaolinite clay. Initially, four series of alkaline activators of NaOH and sodium silicate have been used. Activators present the mixtures of Na2SiO3 and solutions of NaOH, of different molarities 2M, 4M, 6M and 8M. The prepared geopolymer slurries were cast into the designated near shape at room temperature and after that at 60oC. In fact, the post-synthesis curing process (28 days) has an important role in the obtaining good characteristics of geopolymers. Densities, viscosities and refractive index of alkaline activators were determined over the temperature range 15-60oC of process of geopolymerizations. Based on the obtained results of investigated parameters have been selected to predict the properties of materials. All geopolymer samples were characterized by XRD, FTIR, SEM/EDS analysis and Raman spectroscopy providing complementary and valuable information of the investigated materials. This route of ceramics production has advantages associated with producing an environmental friendly, energy saving, clean new technology of geopolymer materials.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018
T1  - Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples
SP  - 73
EP  - 74
UR  - https://hdl.handle.net/21.15107/rcub_dais_4116
ER  - 

@conference{
author = "Ivanović, Marija and Mladenović, Nataša and Gulicovski, Jelena and Pavlović, Vladimir B. and Pavlović, Vera P. and Kljajević, Ljiljana M. and Nenadović, Snežana S.",
year = "2018",
abstract = "Considering geopolymers as inorganic polymers, they are actually amorphous network of interlinked silicate and aluminate groups, so they could be prospective ceramic precursors for materials with defined dimensions obtained by casting and firing, but not from powder processing. In this research, the starting material is metakaolin, which was obtained by calcining domes tic kaolinite clay. Initially, four series of alkaline activators of NaOH and sodium silicate have been used. Activators present the mixtures of Na2SiO3 and solutions of NaOH, of different molarities 2M, 4M, 6M and 8M. The prepared geopolymer slurries were cast into the designated near shape at room temperature and after that at 60oC. In fact, the post-synthesis curing process (28 days) has an important role in the obtaining good characteristics of geopolymers. Densities, viscosities and refractive index of alkaline activators were determined over the temperature range 15-60oC of process of geopolymerizations. Based on the obtained results of investigated parameters have been selected to predict the properties of materials. All geopolymer samples were characterized by XRD, FTIR, SEM/EDS analysis and Raman spectroscopy providing complementary and valuable information of the investigated materials. This route of ceramics production has advantages associated with producing an environmental friendly, energy saving, clean new technology of geopolymer materials.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018",
title = "Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples",
pages = "73-74",
url = "https://hdl.handle.net/21.15107/rcub_dais_4116"
}

Ivanović, M., Mladenović, N., Gulicovski, J., Pavlović, V. B., Pavlović, V. P., Kljajević, L. M.,& Nenadović, S. S.. (2018). Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018
Belgrade : Serbian Ceramic Society., 73-74.
https://hdl.handle.net/21.15107/rcub_dais_4116

Ivanović M, Mladenović N, Gulicovski J, Pavlović VB, Pavlović VP, Kljajević LM, Nenadović SS. Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018. 2018;:73-74.
https://hdl.handle.net/21.15107/rcub_dais_4116 .

Ivanović, Marija, Mladenović, Nataša, Gulicovski, Jelena, Pavlović, Vladimir B., Pavlović, Vera P., Kljajević, Ljiljana M., Nenadović, Snežana S., "Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples" in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018 (2018):73-74,
https://hdl.handle.net/21.15107/rcub_dais_4116 .