TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Stojanović, B. D.
AU  - Pavlović, Vladimir B.
AU  - Marinković Stanojević, Zorica
AU  - Živković, Ljiljana
AU  - Ristic, Momčilo M.
PY  - 2008
UR  - https://dais.sanu.ac.rs/123456789/3561
AB  - In this article the solid state reaction of BaTiO3 formation from a mechanically activated BaCO3-TiO2 system has been investigated. An equimolar mixture of BaCO3 and TiO2 powders was activated in a planetary ball mill in a continual regime for 0, 30 and 90 min, pressed and thermally treated up to 1200°C. The efect of the milling and firing regime on the phase formation was investigated by the X-ray diffraction (XRD) method and differential thermal analysis (DTA). Deconvolution of the experimental DTA curve corresponding to the BaTiO3 synthesis process has been performed. The influence of the activation time on the change of characteristic temperature for each elementary step in the complete solid-state reaction of BaTiO3 formation, was analyzed. These results were correlated with the ones obtained by SEM characterization and by XRD analysis.
PB  - Belgrade : International Institute for the Science of Sintering
T2  - Science of Sintering
T1  - Synthesis of BaTiO3 from a mechanically activated BaCO 3-TiO2 system
SP  - 21
EP  - 26
VL  - 40
IS  - 1
DO  - 10.2298/SOS0801021P
UR  - https://hdl.handle.net/21.15107/rcub_dais_3561
ER  - 

@article{
author = "Pavlović, Vera P. and Stojanović, B. D. and Pavlović, Vladimir B. and Marinković Stanojević, Zorica and Živković, Ljiljana and Ristic, Momčilo M.",
year = "2008",
abstract = "In this article the solid state reaction of BaTiO3 formation from a mechanically activated BaCO3-TiO2 system has been investigated. An equimolar mixture of BaCO3 and TiO2 powders was activated in a planetary ball mill in a continual regime for 0, 30 and 90 min, pressed and thermally treated up to 1200°C. The efect of the milling and firing regime on the phase formation was investigated by the X-ray diffraction (XRD) method and differential thermal analysis (DTA). Deconvolution of the experimental DTA curve corresponding to the BaTiO3 synthesis process has been performed. The influence of the activation time on the change of characteristic temperature for each elementary step in the complete solid-state reaction of BaTiO3 formation, was analyzed. These results were correlated with the ones obtained by SEM characterization and by XRD analysis.",
publisher = "Belgrade : International Institute for the Science of Sintering",
journal = "Science of Sintering",
title = "Synthesis of BaTiO3 from a mechanically activated BaCO 3-TiO2 system",
pages = "21-26",
volume = "40",
number = "1",
doi = "10.2298/SOS0801021P",
url = "https://hdl.handle.net/21.15107/rcub_dais_3561"
}

Pavlović, V. P., Stojanović, B. D., Pavlović, V. B., Marinković Stanojević, Z., Živković, L.,& Ristic, M. M.. (2008). Synthesis of BaTiO3 from a mechanically activated BaCO 3-TiO2 system. in Science of Sintering
Belgrade : International Institute for the Science of Sintering., 40(1), 21-26.
https://doi.org/10.2298/SOS0801021P
https://hdl.handle.net/21.15107/rcub_dais_3561

Pavlović VP, Stojanović BD, Pavlović VB, Marinković Stanojević Z, Živković L, Ristic MM. Synthesis of BaTiO3 from a mechanically activated BaCO 3-TiO2 system. in Science of Sintering. 2008;40(1):21-26.
doi:10.2298/SOS0801021P
https://hdl.handle.net/21.15107/rcub_dais_3561 .

Pavlović, Vera P., Stojanović, B. D., Pavlović, Vladimir B., Marinković Stanojević, Zorica, Živković, Ljiljana, Ristic, Momčilo M., "Synthesis of BaTiO3 from a mechanically activated BaCO 3-TiO2 system" in Science of Sintering, 40, no. 1 (2008):21-26,
https://doi.org/10.2298/SOS0801021P .,
https://hdl.handle.net/21.15107/rcub_dais_3561 .

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Ivetić, Tamara
AU  - Young, D. L.
AU  - Paraskevopoulos, Konstantinos M.
AU  - Zorba, Triantafyllia T.
AU  - Blagojević, Vladimir D.
AU  - Nikolić, Pantelija M.
AU  - Vasiljević-Radović, Dana
AU  - Ristic, Momčilo M.
PY  - 2007
UR  - https://dais.sanu.ac.rs/123456789/12889
AB  - Room temperature far infrared reflectivity spectra of single phase spinel zinc-stannate thin films, prepared by rf magnetron sputtering on a glass substrate, and bulk sintered samples were measured. The sintered samples were obtained by mechanical activation of starting ZnO and SnO2 powders for 10 min followed by sintering at 1300 degrees C for 2 h. The reflectivity diagrams obtained for bulk samples were numerically analyzed using the four-parameter model of coupled oscillators. The optical parameters were determined for six observed ionic oscillators belonging to the spinel structure and two additional oscillators originating from the sintering procedure resulting from pores and grain boundaries. The reflectivity diagrams obtained for thin film samples were analyzed using the four-parameter model for optical phonons with a standard optical multi-layer technique.
PB  - Lausanne : Elsevier Science
T2  - Materials Science and Engineering B-Solid State Materials for Advanced Technology
T1  - Far infrared properties of bulk sintered and thin film Zn2SnO4
SP  - 7
EP  - 11
VL  - 138
IS  - 1
DO  - 10.1016/j.mseb.2006.12.005
UR  - https://hdl.handle.net/21.15107/rcub_dais_12889
ER  - 

@article{
author = "Nikolić, Maria Vesna and Ivetić, Tamara and Young, D. L. and Paraskevopoulos, Konstantinos M. and Zorba, Triantafyllia T. and Blagojević, Vladimir D. and Nikolić, Pantelija M. and Vasiljević-Radović, Dana and Ristic, Momčilo M.",
year = "2007",
abstract = "Room temperature far infrared reflectivity spectra of single phase spinel zinc-stannate thin films, prepared by rf magnetron sputtering on a glass substrate, and bulk sintered samples were measured. The sintered samples were obtained by mechanical activation of starting ZnO and SnO2 powders for 10 min followed by sintering at 1300 degrees C for 2 h. The reflectivity diagrams obtained for bulk samples were numerically analyzed using the four-parameter model of coupled oscillators. The optical parameters were determined for six observed ionic oscillators belonging to the spinel structure and two additional oscillators originating from the sintering procedure resulting from pores and grain boundaries. The reflectivity diagrams obtained for thin film samples were analyzed using the four-parameter model for optical phonons with a standard optical multi-layer technique.",
publisher = "Lausanne : Elsevier Science",
journal = "Materials Science and Engineering B-Solid State Materials for Advanced Technology",
title = "Far infrared properties of bulk sintered and thin film Zn2SnO4",
pages = "7-11",
volume = "138",
number = "1",
doi = "10.1016/j.mseb.2006.12.005",
url = "https://hdl.handle.net/21.15107/rcub_dais_12889"
}

Nikolić, M. V., Ivetić, T., Young, D. L., Paraskevopoulos, K. M., Zorba, T. T., Blagojević, V. D., Nikolić, P. M., Vasiljević-Radović, D.,& Ristic, M. M.. (2007). Far infrared properties of bulk sintered and thin film Zn2SnO4. in Materials Science and Engineering B-Solid State Materials for Advanced Technology
Lausanne : Elsevier Science., 138(1), 7-11.
https://doi.org/10.1016/j.mseb.2006.12.005
https://hdl.handle.net/21.15107/rcub_dais_12889

Nikolić MV, Ivetić T, Young DL, Paraskevopoulos KM, Zorba TT, Blagojević VD, Nikolić PM, Vasiljević-Radović D, Ristic MM. Far infrared properties of bulk sintered and thin film Zn2SnO4. in Materials Science and Engineering B-Solid State Materials for Advanced Technology. 2007;138(1):7-11.
doi:10.1016/j.mseb.2006.12.005
https://hdl.handle.net/21.15107/rcub_dais_12889 .

Nikolić, Maria Vesna, Ivetić, Tamara, Young, D. L., Paraskevopoulos, Konstantinos M., Zorba, Triantafyllia T., Blagojević, Vladimir D., Nikolić, Pantelija M., Vasiljević-Radović, Dana, Ristic, Momčilo M., "Far infrared properties of bulk sintered and thin film Zn2SnO4" in Materials Science and Engineering B-Solid State Materials for Advanced Technology, 138, no. 1 (2007):7-11,
https://doi.org/10.1016/j.mseb.2006.12.005 .,
https://hdl.handle.net/21.15107/rcub_dais_12889 .