TY  - JOUR
AU  - Marinković Stanojević, Zorica
AU  - Branković, Zorica
AU  - Jagličić, Zvonko
AU  - Jagodič, Marko
AU  - Mančić, Lidija
AU  - Bernik, Slavko
AU  - Rečnik, A.
AU  - Branković, Goran
PY  - 2011
UR  - https://dais.sanu.ac.rs/123456789/712
AB  - We have studied the formation of BiMnO3 (BMO) nanocrystalline perovskite powder produced by high-energy milling of the constituent oxides. The crystal structure and the amount of crystalline and amorphous phases in the powder as a function of the milling time were determined with XRPD using Rietveld refinement. BMO perovskite formed directly from highly activated nano-sized constituent oxides after 240 min of milling and subsequently grew during prolonged milling. The morphology, structure, and chemical composition of the powder were investigated by SEM and TEM. A clear ferromagnetic transition was observed at T C ~66 K for a sample milled for 240 min and increased with milling time. The magnetic hysteresis behavior is similar to that of a soft ferromagnet. The magnetic properties of the obtained BMO powders were found to change as a function of milling time in a manner consistent with variations in the nanocomposite microstructure.
PB  - Springer Netherlands
T2  - Journal of Nanoparticle Research
T1  - Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis
SP  - 3431
EP  - 3439
VL  - 13
IS  - 8
DO  - 10.1007/s11051-011-0265-7
UR  - https://hdl.handle.net/21.15107/rcub_dais_712
ER  - 

@article{
author = "Marinković Stanojević, Zorica and Branković, Zorica and Jagličić, Zvonko and Jagodič, Marko and Mančić, Lidija and Bernik, Slavko and Rečnik, A. and Branković, Goran",
year = "2011",
abstract = "We have studied the formation of BiMnO3 (BMO) nanocrystalline perovskite powder produced by high-energy milling of the constituent oxides. The crystal structure and the amount of crystalline and amorphous phases in the powder as a function of the milling time were determined with XRPD using Rietveld refinement. BMO perovskite formed directly from highly activated nano-sized constituent oxides after 240 min of milling and subsequently grew during prolonged milling. The morphology, structure, and chemical composition of the powder were investigated by SEM and TEM. A clear ferromagnetic transition was observed at T C ~66 K for a sample milled for 240 min and increased with milling time. The magnetic hysteresis behavior is similar to that of a soft ferromagnet. The magnetic properties of the obtained BMO powders were found to change as a function of milling time in a manner consistent with variations in the nanocomposite microstructure.",
publisher = "Springer Netherlands",
journal = "Journal of Nanoparticle Research",
title = "Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis",
pages = "3431-3439",
volume = "13",
number = "8",
doi = "10.1007/s11051-011-0265-7",
url = "https://hdl.handle.net/21.15107/rcub_dais_712"
}

Marinković Stanojević, Z., Branković, Z., Jagličić, Z., Jagodič, M., Mančić, L., Bernik, S., Rečnik, A.,& Branković, G.. (2011). Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis. in Journal of Nanoparticle Research
Springer Netherlands., 13(8), 3431-3439.
https://doi.org/10.1007/s11051-011-0265-7
https://hdl.handle.net/21.15107/rcub_dais_712

Marinković Stanojević Z, Branković Z, Jagličić Z, Jagodič M, Mančić L, Bernik S, Rečnik A, Branković G. Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis. in Journal of Nanoparticle Research. 2011;13(8):3431-3439.
doi:10.1007/s11051-011-0265-7
https://hdl.handle.net/21.15107/rcub_dais_712 .

Marinković Stanojević, Zorica, Branković, Zorica, Jagličić, Zvonko, Jagodič, Marko, Mančić, Lidija, Bernik, Slavko, Rečnik, A., Branković, Goran, "Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis" in Journal of Nanoparticle Research, 13, no. 8 (2011):3431-3439,
https://doi.org/10.1007/s11051-011-0265-7 .,
https://hdl.handle.net/21.15107/rcub_dais_712 .

TY  - CONF
AU  - Marinković Stanojević, Zorica
AU  - Počuča Nešić, Milica
AU  - Branković, Zorica
AU  - Mančić, Lidija
AU  - Bernik, Slavko
AU  - Rečnik, A.
AU  - Branković, Goran
PY  - 2011
UR  - https://dais.sanu.ac.rs/123456789/671
AB  - Multiferroic yttrium manganite (YMnO3) is known as a material that exhibits both ferromagnetic and ferroelectric properties making it interesting for various technological applications. In this work single-phased YMnO3 was prepared for the first time by mechanochemical synthesis in a planetary ball mill. The YMnO3 can be formed directly from the highly activated constituent oxides, Y2O3 and Mn2O3, after 60 min of milling time and subsequently grows during prolonged milling. The cumulative energy introduced into the system during milling for 60 min was 86 kJ/g. X-ray analysis indicates that the as-prepared samples crystallize majority with hexagonal (P63cm) and minorly with orthorhombic (Pnma) YMnO3 structure. The morphology, structure and chemical composition of the powder were investigated by SEM with EDS and TEM. The magnetic properties of the obtained YMnO3 powders were found to change as a function of milling time in a manner consistent with the variation in the nanocomposite microstructure.
PB  - Belgrade : Materials Research Society of Serbia
C3  - VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts
T1  - Mechanochemical synthesis of multiferroic yttrium manganite
SP  - 83
EP  - 83
UR  - https://hdl.handle.net/21.15107/rcub_dais_671
ER  - 

@conference{
author = "Marinković Stanojević, Zorica and Počuča Nešić, Milica and Branković, Zorica and Mančić, Lidija and Bernik, Slavko and Rečnik, A. and Branković, Goran",
year = "2011",
abstract = "Multiferroic yttrium manganite (YMnO3) is known as a material that exhibits both ferromagnetic and ferroelectric properties making it interesting for various technological applications. In this work single-phased YMnO3 was prepared for the first time by mechanochemical synthesis in a planetary ball mill. The YMnO3 can be formed directly from the highly activated constituent oxides, Y2O3 and Mn2O3, after 60 min of milling time and subsequently grows during prolonged milling. The cumulative energy introduced into the system during milling for 60 min was 86 kJ/g. X-ray analysis indicates that the as-prepared samples crystallize majority with hexagonal (P63cm) and minorly with orthorhombic (Pnma) YMnO3 structure. The morphology, structure and chemical composition of the powder were investigated by SEM with EDS and TEM. The magnetic properties of the obtained YMnO3 powders were found to change as a function of milling time in a manner consistent with the variation in the nanocomposite microstructure.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts",
title = "Mechanochemical synthesis of multiferroic yttrium manganite",
pages = "83-83",
url = "https://hdl.handle.net/21.15107/rcub_dais_671"
}

Marinković Stanojević, Z., Počuča Nešić, M., Branković, Z., Mančić, L., Bernik, S., Rečnik, A.,& Branković, G.. (2011). Mechanochemical synthesis of multiferroic yttrium manganite. in VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts
Belgrade : Materials Research Society of Serbia., 83-83.
https://hdl.handle.net/21.15107/rcub_dais_671

Marinković Stanojević Z, Počuča Nešić M, Branković Z, Mančić L, Bernik S, Rečnik A, Branković G. Mechanochemical synthesis of multiferroic yttrium manganite. in VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts. 2011;:83-83.
https://hdl.handle.net/21.15107/rcub_dais_671 .

Marinković Stanojević, Zorica, Počuča Nešić, Milica, Branković, Zorica, Mančić, Lidija, Bernik, Slavko, Rečnik, A., Branković, Goran, "Mechanochemical synthesis of multiferroic yttrium manganite" in VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts (2011):83-83,
https://hdl.handle.net/21.15107/rcub_dais_671 .