TY  - JOUR
AU  - Janićijević, Aleksandra
AU  - Pavlović, Vera P.
AU  - Kovačević, Danijela
AU  - Đorđević, Nenad
AU  - Marinković, Aleksandar
AU  - Vlahović, Branislav
AU  - Karoui, Abdennaceur
AU  - Pavlović, Vladimir B.
AU  - Filipović, Suzana
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/16160
AB  - The hybrid multifunctional magnetic organic/inorganic composite materials, with addition of optimal filler type and quantities are attractive due to wide range of potential application, from various pressure sensors, through smart packaging, to tissue engineering and medicine. The structural, morphological and magnetic properties of polyvinylidene fluoride/nanocellulose/magnetite@BaTiO3 hybrid films were investigated. The presented study revealed significant impact of nanocellulose (NC) content on formation of the polymorphs of PVDF, responsible for ferro-, piezo- and pyroelectric properties. The structural characterization, XRD and Raman measurements confirmed enhancement of the β and γ phases when the loading of NC higher then 4 wt% in multi-component hybrid films. The saturation magnetization value gradually raises with increasing amount of NC and reaches its maximum value of 41.2 emu/g at content of 4 wt% NC. Further, addition of NC decreases saturation magnetization value regardless of constant amount of magnetite, indicating optimal content of NC substrate for co-precipitation of Fe3O4 onto NC matrix.
PB  - Springer
T2  - Journal of Inorganic and Organometallic Polymers and Materials
T1  - Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material
DO  - 10.1007/s10904-023-02953-w
UR  - https://hdl.handle.net/21.15107/rcub_dais_16160
ER  - 

@article{
author = "Janićijević, Aleksandra and Pavlović, Vera P. and Kovačević, Danijela and Đorđević, Nenad and Marinković, Aleksandar and Vlahović, Branislav and Karoui, Abdennaceur and Pavlović, Vladimir B. and Filipović, Suzana",
year = "2023",
abstract = "The hybrid multifunctional magnetic organic/inorganic composite materials, with addition of optimal filler type and quantities are attractive due to wide range of potential application, from various pressure sensors, through smart packaging, to tissue engineering and medicine. The structural, morphological and magnetic properties of polyvinylidene fluoride/nanocellulose/magnetite@BaTiO3 hybrid films were investigated. The presented study revealed significant impact of nanocellulose (NC) content on formation of the polymorphs of PVDF, responsible for ferro-, piezo- and pyroelectric properties. The structural characterization, XRD and Raman measurements confirmed enhancement of the β and γ phases when the loading of NC higher then 4 wt% in multi-component hybrid films. The saturation magnetization value gradually raises with increasing amount of NC and reaches its maximum value of 41.2 emu/g at content of 4 wt% NC. Further, addition of NC decreases saturation magnetization value regardless of constant amount of magnetite, indicating optimal content of NC substrate for co-precipitation of Fe3O4 onto NC matrix.",
publisher = "Springer",
journal = "Journal of Inorganic and Organometallic Polymers and Materials",
title = "Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material",
doi = "10.1007/s10904-023-02953-w",
url = "https://hdl.handle.net/21.15107/rcub_dais_16160"
}

Janićijević, A., Pavlović, V. P., Kovačević, D., Đorđević, N., Marinković, A., Vlahović, B., Karoui, A., Pavlović, V. B.,& Filipović, S.. (2023). Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material. in Journal of Inorganic and Organometallic Polymers and Materials
Springer..
https://doi.org/10.1007/s10904-023-02953-w
https://hdl.handle.net/21.15107/rcub_dais_16160

Janićijević A, Pavlović VP, Kovačević D, Đorđević N, Marinković A, Vlahović B, Karoui A, Pavlović VB, Filipović S. Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material. in Journal of Inorganic and Organometallic Polymers and Materials. 2023;.
doi:10.1007/s10904-023-02953-w
https://hdl.handle.net/21.15107/rcub_dais_16160 .

Janićijević, Aleksandra, Pavlović, Vera P., Kovačević, Danijela, Đorđević, Nenad, Marinković, Aleksandar, Vlahović, Branislav, Karoui, Abdennaceur, Pavlović, Vladimir B., Filipović, Suzana, "Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material" in Journal of Inorganic and Organometallic Polymers and Materials (2023),
https://doi.org/10.1007/s10904-023-02953-w .,
https://hdl.handle.net/21.15107/rcub_dais_16160 .

TY  - JOUR
AU  - Janićijević, Aleksandra
AU  - Pavlović, Vera P.
AU  - Kovačević, Danijela
AU  - Đorđević, Nenad
AU  - Marinković, Aleksandar
AU  - Vlahović, Branislav
AU  - Karoui, Abdennaceur
AU  - Pavlović, Vladimir B.
AU  - Filipović, Suzana
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/16160
UR  - https://dais.sanu.ac.rs/123456789/16161
AB  - The hybrid multifunctional magnetic organic/inorganic composite materials, with addition of optimal filler type and quantities are attractive due to wide range of potential application, from various pressure sensors, through smart packaging, to tissue engineering and medicine. The structural, morphological and magnetic properties of polyvinylidene fluoride/nanocellulose/magnetite@BaTiO3 hybrid films were investigated. The presented study revealed significant impact of nanocellulose (NC) content on formation of the polymorphs of PVDF, responsible for ferro-, piezo- and pyroelectric properties. The structural characterization, XRD and Raman measurements confirmed enhancement of the β and γ phases when the loading of NC higher then 4 wt% in multi-component hybrid films. The saturation magnetization value gradually raises with increasing amount of NC and reaches its maximum value of 41.2 emu/g at content of 4 wt% NC. Further, addition of NC decreases saturation magnetization value regardless of constant amount of magnetite, indicating optimal content of NC substrate for co-precipitation of Fe3O4 onto NC matrix.
PB  - Springer
T2  - Journal of Inorganic and Organometallic Polymers and Materials
T1  - Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material
DO  - 10.1007/s10904-023-02953-w
UR  - https://hdl.handle.net/21.15107/rcub_dais_16161
ER  - 

@article{
author = "Janićijević, Aleksandra and Pavlović, Vera P. and Kovačević, Danijela and Đorđević, Nenad and Marinković, Aleksandar and Vlahović, Branislav and Karoui, Abdennaceur and Pavlović, Vladimir B. and Filipović, Suzana",
year = "2023",
abstract = "The hybrid multifunctional magnetic organic/inorganic composite materials, with addition of optimal filler type and quantities are attractive due to wide range of potential application, from various pressure sensors, through smart packaging, to tissue engineering and medicine. The structural, morphological and magnetic properties of polyvinylidene fluoride/nanocellulose/magnetite@BaTiO3 hybrid films were investigated. The presented study revealed significant impact of nanocellulose (NC) content on formation of the polymorphs of PVDF, responsible for ferro-, piezo- and pyroelectric properties. The structural characterization, XRD and Raman measurements confirmed enhancement of the β and γ phases when the loading of NC higher then 4 wt% in multi-component hybrid films. The saturation magnetization value gradually raises with increasing amount of NC and reaches its maximum value of 41.2 emu/g at content of 4 wt% NC. Further, addition of NC decreases saturation magnetization value regardless of constant amount of magnetite, indicating optimal content of NC substrate for co-precipitation of Fe3O4 onto NC matrix.",
publisher = "Springer",
journal = "Journal of Inorganic and Organometallic Polymers and Materials",
title = "Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material",
doi = "10.1007/s10904-023-02953-w",
url = "https://hdl.handle.net/21.15107/rcub_dais_16161"
}

Janićijević, A., Pavlović, V. P., Kovačević, D., Đorđević, N., Marinković, A., Vlahović, B., Karoui, A., Pavlović, V. B.,& Filipović, S.. (2023). Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material. in Journal of Inorganic and Organometallic Polymers and Materials
Springer..
https://doi.org/10.1007/s10904-023-02953-w
https://hdl.handle.net/21.15107/rcub_dais_16161

Janićijević A, Pavlović VP, Kovačević D, Đorđević N, Marinković A, Vlahović B, Karoui A, Pavlović VB, Filipović S. Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material. in Journal of Inorganic and Organometallic Polymers and Materials. 2023;.
doi:10.1007/s10904-023-02953-w
https://hdl.handle.net/21.15107/rcub_dais_16161 .

Janićijević, Aleksandra, Pavlović, Vera P., Kovačević, Danijela, Đorđević, Nenad, Marinković, Aleksandar, Vlahović, Branislav, Karoui, Abdennaceur, Pavlović, Vladimir B., Filipović, Suzana, "Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material" in Journal of Inorganic and Organometallic Polymers and Materials (2023),
https://doi.org/10.1007/s10904-023-02953-w .,
https://hdl.handle.net/21.15107/rcub_dais_16161 .

TY  - JOUR
AU  - Janićijević, Aleksandra
AU  - Filipović, Suzana
AU  - Sknepnek, Aleksandra
AU  - Vlahović, Branislav
AU  - Đorđević, Nenad
AU  - Kovacević, Danijela
AU  - Mirković, Miljana
AU  - Petronijević, Ivan
AU  - Živković, Predrag
AU  - Rogan, Jelena
AU  - Pavlović, Vladimir B.
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/15363
AB  - In the search for environmentally friendly materials with a wide range of properties, polymer composites have emerged as a promising alternative due to their multifunctional properties. This study focuses on the synthesis of composite materials consisting of four components: bacterial nanocellulose (BNC) modified with magnetic Fe3O4, and a mixture of BaTiO3 (BT) and polyvinylidene fluoride (PVDF). The BT powder was mechanically activated prior to mixing with PVDF. The influence of BT mechanical activation and BNC with magnetic particles on the PVDF matrix was investigated. The obtained composite films’ structural characteristics, morphology, and dielectric properties are presented. This research provides insights into the relationship between mechanical activation of the filler and structural and dielectric properties in the PVDF/BT/BNC/Fe3O4 system, creating the way for the development of materials with a wide range of diverse properties that support the concept of green technologies.
PB  - Basel : MDPI
T2  - Polymers
T1  - Dielectric and Structural Properties of the Hybrid Material Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Composite
SP  - 4080
VL  - 15
IS  - 20
DO  - 10.3390/polym15204080
UR  - https://hdl.handle.net/21.15107/rcub_dais_15363
ER  - 

@article{
author = "Janićijević, Aleksandra and Filipović, Suzana and Sknepnek, Aleksandra and Vlahović, Branislav and Đorđević, Nenad and Kovacević, Danijela and Mirković, Miljana and Petronijević, Ivan and Živković, Predrag and Rogan, Jelena and Pavlović, Vladimir B.",
year = "2023",
abstract = "In the search for environmentally friendly materials with a wide range of properties, polymer composites have emerged as a promising alternative due to their multifunctional properties. This study focuses on the synthesis of composite materials consisting of four components: bacterial nanocellulose (BNC) modified with magnetic Fe3O4, and a mixture of BaTiO3 (BT) and polyvinylidene fluoride (PVDF). The BT powder was mechanically activated prior to mixing with PVDF. The influence of BT mechanical activation and BNC with magnetic particles on the PVDF matrix was investigated. The obtained composite films’ structural characteristics, morphology, and dielectric properties are presented. This research provides insights into the relationship between mechanical activation of the filler and structural and dielectric properties in the PVDF/BT/BNC/Fe3O4 system, creating the way for the development of materials with a wide range of diverse properties that support the concept of green technologies.",
publisher = "Basel : MDPI",
journal = "Polymers",
title = "Dielectric and Structural Properties of the Hybrid Material Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Composite",
pages = "4080",
volume = "15",
number = "20",
doi = "10.3390/polym15204080",
url = "https://hdl.handle.net/21.15107/rcub_dais_15363"
}

Janićijević, A., Filipović, S., Sknepnek, A., Vlahović, B., Đorđević, N., Kovacević, D., Mirković, M., Petronijević, I., Živković, P., Rogan, J.,& Pavlović, V. B.. (2023). Dielectric and Structural Properties of the Hybrid Material Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Composite. in Polymers
Basel : MDPI., 15(20), 4080.
https://doi.org/10.3390/polym15204080
https://hdl.handle.net/21.15107/rcub_dais_15363

Janićijević A, Filipović S, Sknepnek A, Vlahović B, Đorđević N, Kovacević D, Mirković M, Petronijević I, Živković P, Rogan J, Pavlović VB. Dielectric and Structural Properties of the Hybrid Material Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Composite. in Polymers. 2023;15(20):4080.
doi:10.3390/polym15204080
https://hdl.handle.net/21.15107/rcub_dais_15363 .

Janićijević, Aleksandra, Filipović, Suzana, Sknepnek, Aleksandra, Vlahović, Branislav, Đorđević, Nenad, Kovacević, Danijela, Mirković, Miljana, Petronijević, Ivan, Živković, Predrag, Rogan, Jelena, Pavlović, Vladimir B., "Dielectric and Structural Properties of the Hybrid Material Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Composite" in Polymers, 15, no. 20 (2023):4080,
https://doi.org/10.3390/polym15204080 .,
https://hdl.handle.net/21.15107/rcub_dais_15363 .

TY  - CONF
AU  - Pavlović, Vladimir B.
AU  - Vuković, G.
AU  - Nikolić, M.
AU  - Pavlović, Vera P.
AU  - Perić, M.
AU  - Nenadović, S.
AU  - Ivanović, M.
AU  - Mirković, M.
AU  - Đoković, V.
AU  - Knežević, S.
AU  - Šuljagić, Marija
AU  - Anđelković, Lj.
AU  - Janićijević, Aleksandra
AU  - Kovačević, D.
AU  - Filipović, Suzana
AU  - Vujančević, Jelena
AU  - Vlahović, Branislav
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/15760
AB  - The convergence of nano-, bio-, and information technologies is based on the understanding of complex hierarchical structures and systems, as well as on the material unity at the nanoscale and on technology integration from that scale. A growing interest in these technologies is a result of their potential to provide solutions to numerous societal challenges, such as advanced healthcare, environmental remediation, sustainable development, and adoption of cyber-physical systems based on the Internet of Things and the Internet of Systems. Taking into account that hybrid nanomaterials possess extraordinary physical and chemical properties derived from their size in the nanoscale, the aim of this work is to present the connection between processing parameters and multifunctional properties of nano scale hybrid materials, focusing on the study of ceramic-polymer structures before they can be nano-engineered into functional devices. The unique functionality of these nanostructures has enabled their applications in numerous devices such as: micro and nano-electro-mechanical systems (MEMS/NEMS), sensors, microactuators, surface acoustic wave devices, polymer electrolyte membrane fuel cells, switches, thermistors, resonators and filters, electrooptic devices, etc. In this study special attention has been paid to their applications in the fields of electronics, biotechnology, environmental protection and remediation.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application XI New Frontiers in Multifunctional Material Science and Processing, Serbian Academy of Sciences and Art Serbia, Belgrade,18-20.September 2023
T1  - Hybrid Nanoscale Materials for Convergent Technologies
SP  - 45
EP  - 45
UR  - https://hdl.handle.net/21.15107/rcub_dais_15760
ER  - 

@conference{
author = "Pavlović, Vladimir B. and Vuković, G. and Nikolić, M. and Pavlović, Vera P. and Perić, M. and Nenadović, S. and Ivanović, M. and Mirković, M. and Đoković, V. and Knežević, S. and Šuljagić, Marija and Anđelković, Lj. and Janićijević, Aleksandra and Kovačević, D. and Filipović, Suzana and Vujančević, Jelena and Vlahović, Branislav",
year = "2023",
abstract = "The convergence of nano-, bio-, and information technologies is based on the understanding of complex hierarchical structures and systems, as well as on the material unity at the nanoscale and on technology integration from that scale. A growing interest in these technologies is a result of their potential to provide solutions to numerous societal challenges, such as advanced healthcare, environmental remediation, sustainable development, and adoption of cyber-physical systems based on the Internet of Things and the Internet of Systems. Taking into account that hybrid nanomaterials possess extraordinary physical and chemical properties derived from their size in the nanoscale, the aim of this work is to present the connection between processing parameters and multifunctional properties of nano scale hybrid materials, focusing on the study of ceramic-polymer structures before they can be nano-engineered into functional devices. The unique functionality of these nanostructures has enabled their applications in numerous devices such as: micro and nano-electro-mechanical systems (MEMS/NEMS), sensors, microactuators, surface acoustic wave devices, polymer electrolyte membrane fuel cells, switches, thermistors, resonators and filters, electrooptic devices, etc. In this study special attention has been paid to their applications in the fields of electronics, biotechnology, environmental protection and remediation.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application XI New Frontiers in Multifunctional Material Science and Processing, Serbian Academy of Sciences and Art Serbia, Belgrade,18-20.September 2023",
title = "Hybrid Nanoscale Materials for Convergent Technologies",
pages = "45-45",
url = "https://hdl.handle.net/21.15107/rcub_dais_15760"
}

Pavlović, V. B., Vuković, G., Nikolić, M., Pavlović, V. P., Perić, M., Nenadović, S., Ivanović, M., Mirković, M., Đoković, V., Knežević, S., Šuljagić, M., Anđelković, Lj., Janićijević, A., Kovačević, D., Filipović, S., Vujančević, J.,& Vlahović, B.. (2023). Hybrid Nanoscale Materials for Convergent Technologies. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application XI New Frontiers in Multifunctional Material Science and Processing, Serbian Academy of Sciences and Art Serbia, Belgrade,18-20.September 2023
Belgrade : Serbian Ceramic Society., 45-45.
https://hdl.handle.net/21.15107/rcub_dais_15760

Pavlović VB, Vuković G, Nikolić M, Pavlović VP, Perić M, Nenadović S, Ivanović M, Mirković M, Đoković V, Knežević S, Šuljagić M, Anđelković L, Janićijević A, Kovačević D, Filipović S, Vujančević J, Vlahović B. Hybrid Nanoscale Materials for Convergent Technologies. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application XI New Frontiers in Multifunctional Material Science and Processing, Serbian Academy of Sciences and Art Serbia, Belgrade,18-20.September 2023. 2023;:45-45.
https://hdl.handle.net/21.15107/rcub_dais_15760 .

Pavlović, Vladimir B., Vuković, G., Nikolić, M., Pavlović, Vera P., Perić, M., Nenadović, S., Ivanović, M., Mirković, M., Đoković, V., Knežević, S., Šuljagić, Marija, Anđelković, Lj., Janićijević, Aleksandra, Kovačević, D., Filipović, Suzana, Vujančević, Jelena, Vlahović, Branislav, "Hybrid Nanoscale Materials for Convergent Technologies" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application XI New Frontiers in Multifunctional Material Science and Processing, Serbian Academy of Sciences and Art Serbia, Belgrade,18-20.September 2023 (2023):45-45,
https://hdl.handle.net/21.15107/rcub_dais_15760 .

TY  - JOUR
AU  - Janićijević, Aleksandra
AU  - Pavlović, Vera P.
AU  - Kovačević, Danijela
AU  - Perić, Marko
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
AU  - Filipović, Suzana
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13152
AB  - The rise of innovation in the electrical industry is driven by the controlled design of new materials. The hybrid materials based on magnetite/nanocellulose are highly interesting due to their various applications in medicine, ecology, catalysis and electronics. In this study, the structure and morphology of nanocellulose/magnetite hybrid nanomaterials were investigated. The effect of nanocellulose loading on the crystal structure of synthesized composites was investigated by XRD and FTIR methods. The presented study reveals that the interaction between the cellulose and magnetic nanoparticles depends on the nanocellulose content. Further, a transition from cellulose II to cellulose I allomorph is observed. SEM and EDS are employed to determine the variation in morphology with changes in component concentrations. By the calculation of magnetic interactions between adjacent Fe3+ and Fe2+ ions within composites, it is determined that ferromagnetic coupling predominates.
T2  - Polymers
T1  - Structural Characterization of Nanocellulose/Fe3O4 Hybrid Nanomaterials
SP  - 1819
VL  - 14
IS  - 9
DO  - 10.3390/polym14091819
UR  - https://hdl.handle.net/21.15107/rcub_dais_13152
ER  - 

@article{
author = "Janićijević, Aleksandra and Pavlović, Vera P. and Kovačević, Danijela and Perić, Marko and Vlahović, Branislav and Pavlović, Vladimir B. and Filipović, Suzana",
year = "2022",
abstract = "The rise of innovation in the electrical industry is driven by the controlled design of new materials. The hybrid materials based on magnetite/nanocellulose are highly interesting due to their various applications in medicine, ecology, catalysis and electronics. In this study, the structure and morphology of nanocellulose/magnetite hybrid nanomaterials were investigated. The effect of nanocellulose loading on the crystal structure of synthesized composites was investigated by XRD and FTIR methods. The presented study reveals that the interaction between the cellulose and magnetic nanoparticles depends on the nanocellulose content. Further, a transition from cellulose II to cellulose I allomorph is observed. SEM and EDS are employed to determine the variation in morphology with changes in component concentrations. By the calculation of magnetic interactions between adjacent Fe3+ and Fe2+ ions within composites, it is determined that ferromagnetic coupling predominates.",
journal = "Polymers",
title = "Structural Characterization of Nanocellulose/Fe3O4 Hybrid Nanomaterials",
pages = "1819",
volume = "14",
number = "9",
doi = "10.3390/polym14091819",
url = "https://hdl.handle.net/21.15107/rcub_dais_13152"
}

Janićijević, A., Pavlović, V. P., Kovačević, D., Perić, M., Vlahović, B., Pavlović, V. B.,& Filipović, S.. (2022). Structural Characterization of Nanocellulose/Fe3O4 Hybrid Nanomaterials. in Polymers, 14(9), 1819.
https://doi.org/10.3390/polym14091819
https://hdl.handle.net/21.15107/rcub_dais_13152

Janićijević A, Pavlović VP, Kovačević D, Perić M, Vlahović B, Pavlović VB, Filipović S. Structural Characterization of Nanocellulose/Fe3O4 Hybrid Nanomaterials. in Polymers. 2022;14(9):1819.
doi:10.3390/polym14091819
https://hdl.handle.net/21.15107/rcub_dais_13152 .

Janićijević, Aleksandra, Pavlović, Vera P., Kovačević, Danijela, Perić, Marko, Vlahović, Branislav, Pavlović, Vladimir B., Filipović, Suzana, "Structural Characterization of Nanocellulose/Fe3O4 Hybrid Nanomaterials" in Polymers, 14, no. 9 (2022):1819,
https://doi.org/10.3390/polym14091819 .,
https://hdl.handle.net/21.15107/rcub_dais_13152 .

TY  - JOUR
AU  - Janićijević, Aleksandra
AU  - Sknepnek, Aleksandra
AU  - Mirković, Miljana
AU  - Pavlović, Vladimir
AU  - Filipović, Suzana
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12342
AB  - Napredak u mnogim oblastima tehnike i tehnologije je blisko povezan sa razvojem novih ili unapređenjem postojećih materijala. Imajući u vidu široku primenu bakterijske nanoceluloze (BNC) u raznim oblastima svakodnevnog života, od biomedicine, ekologije do elektronike, kompoziti na bazi BNC su sve rasprostranjeniji i privlače pažnju naučne zajednice. Posebno je značajno detaljno ispitati parametre sinteze koji utiču na promene u kristalnoj strukturi i morfologiji dobijenih kompozita, imajući u vidu da ove promene imaju značajan uticaj na krajnja funkcionalna svojstva. U ovom radu je proučavan kompozitni materijal zasnovan na bakterijskoj nanocelulozi BNC (kao početnoj komponenti) i feromagnetnom Fe3O4. BNC je dobijena aktivnošću bakterija sirćetnog vrenja nakon 7 dana rasta u odgovarajućem medijuma. Istraživanje je usmereno na optimizaciju uslova precipitacije Fe3O4, koji se odnose na promenu intervala stajanja BNC filmova u rastvoru soli gvožđa. Uticaj različitih uslova sinteze je analiziran metodama SEM-EDS, FTIR i XRD.
AB  - Development in many areas of engineering and technology are closely linked to the development of new or improvement of existing materials. Having in mind wide use of bacterial nanocellulose (BNC) in various areas of everyday life, from biomedicine, ecology to electronics, BNC-based composites are becoming widely used and attracting the attention of the scientific community. It is especially important to examine in detail the synthesis parameters that affect the changes in the crystal structure and morphology of the obtained composites, having in mind that these changes have a crucial influence on their final functional properties. In this paper, a composite material based on bacterial nanocellulose BNC (as the matrix) and ferromagnetic Fe3O4 was studied. BNC was obtained by the activity of acetic fermentation bacteria after 7 days of growth in a suitable medium. The research is aimed to optimization of the Fe3O4 precipitation conditions. It's especially considering the time interval of BNC films spend in the iron salt solution. The influence of the performed synthesis conditions was considered by the SEMEDS, FTIR and XRD methods.
PB  - Beograd : Savez inženjera i tehničara Srbije
T2  - Tehnika
T1  - Optimizacija parametara sinteze nanokompozita na bazi bakterijske nanoceluloze/Fe3O4
SP  - 273
EP  - 278
VL  - 76
IS  - 3
DO  - 10.5937/tehnika2103273J
UR  - https://hdl.handle.net/21.15107/rcub_dais_12342
ER  - 

@article{
author = "Janićijević, Aleksandra and Sknepnek, Aleksandra and Mirković, Miljana and Pavlović, Vladimir and Filipović, Suzana",
year = "2021",
abstract = "Napredak u mnogim oblastima tehnike i tehnologije je blisko povezan sa razvojem novih ili unapređenjem postojećih materijala. Imajući u vidu široku primenu bakterijske nanoceluloze (BNC) u raznim oblastima svakodnevnog života, od biomedicine, ekologije do elektronike, kompoziti na bazi BNC su sve rasprostranjeniji i privlače pažnju naučne zajednice. Posebno je značajno detaljno ispitati parametre sinteze koji utiču na promene u kristalnoj strukturi i morfologiji dobijenih kompozita, imajući u vidu da ove promene imaju značajan uticaj na krajnja funkcionalna svojstva. U ovom radu je proučavan kompozitni materijal zasnovan na bakterijskoj nanocelulozi BNC (kao početnoj komponenti) i feromagnetnom Fe3O4. BNC je dobijena aktivnošću bakterija sirćetnog vrenja nakon 7 dana rasta u odgovarajućem medijuma. Istraživanje je usmereno na optimizaciju uslova precipitacije Fe3O4, koji se odnose na promenu intervala stajanja BNC filmova u rastvoru soli gvožđa. Uticaj različitih uslova sinteze je analiziran metodama SEM-EDS, FTIR i XRD., Development in many areas of engineering and technology are closely linked to the development of new or improvement of existing materials. Having in mind wide use of bacterial nanocellulose (BNC) in various areas of everyday life, from biomedicine, ecology to electronics, BNC-based composites are becoming widely used and attracting the attention of the scientific community. It is especially important to examine in detail the synthesis parameters that affect the changes in the crystal structure and morphology of the obtained composites, having in mind that these changes have a crucial influence on their final functional properties. In this paper, a composite material based on bacterial nanocellulose BNC (as the matrix) and ferromagnetic Fe3O4 was studied. BNC was obtained by the activity of acetic fermentation bacteria after 7 days of growth in a suitable medium. The research is aimed to optimization of the Fe3O4 precipitation conditions. It's especially considering the time interval of BNC films spend in the iron salt solution. The influence of the performed synthesis conditions was considered by the SEMEDS, FTIR and XRD methods.",
publisher = "Beograd : Savez inženjera i tehničara Srbije",
journal = "Tehnika",
title = "Optimizacija parametara sinteze nanokompozita na bazi bakterijske nanoceluloze/Fe3O4",
pages = "273-278",
volume = "76",
number = "3",
doi = "10.5937/tehnika2103273J",
url = "https://hdl.handle.net/21.15107/rcub_dais_12342"
}

Janićijević, A., Sknepnek, A., Mirković, M., Pavlović, V.,& Filipović, S.. (2021). Optimizacija parametara sinteze nanokompozita na bazi bakterijske nanoceluloze/Fe3O4. in Tehnika
Beograd : Savez inženjera i tehničara Srbije., 76(3), 273-278.
https://doi.org/10.5937/tehnika2103273J
https://hdl.handle.net/21.15107/rcub_dais_12342

Janićijević A, Sknepnek A, Mirković M, Pavlović V, Filipović S. Optimizacija parametara sinteze nanokompozita na bazi bakterijske nanoceluloze/Fe3O4. in Tehnika. 2021;76(3):273-278.
doi:10.5937/tehnika2103273J
https://hdl.handle.net/21.15107/rcub_dais_12342 .

Janićijević, Aleksandra, Sknepnek, Aleksandra, Mirković, Miljana, Pavlović, Vladimir, Filipović, Suzana, "Optimizacija parametara sinteze nanokompozita na bazi bakterijske nanoceluloze/Fe3O4" in Tehnika, 76, no. 3 (2021):273-278,
https://doi.org/10.5937/tehnika2103273J .,
https://hdl.handle.net/21.15107/rcub_dais_12342 .

TY  - CONF
AU  - Janićijević, Aleksandra
AU  - Filipović, Suzana
AU  - Pavlović, Vladimir B.
AU  - Sknepnek, Aleksandra
AU  - Kovačević, Danijela
AU  - Đorđević, Nenad
AU  - Mirković, Miljana
AU  - Živković, Predrag
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12356
AB  - Kao jedan od najzastupljenijih biopolimera na Zemlji, celuloza je našla primenu u prehrambenoj industriji, biomedicini i biotehnologiji. Dobijanje celuloznih vlakana iz biljaka je praćeno prisustvom nusproizvoda, čije je uklanjanje zahtevan proces. Stoga, materijali na bazi bakterijske nanoceluloze (BCN), nalaze sve širu primenu u svakodnevnici. Imajući u vidu prednosti BCN, u ovom radu su ispitivane promene u strukturi i morfologiji BCN u funkciji parametara sinteze. Analiziran je uticaj vrste i zapremine medijuma, kao i dužine prečišćavanja u NaOH, na promene u prinosu i strukturi BCN. Navedene promene su ispitivane metodama XRD, FTIR, kao i primenom SEM i EDS analize.
AB  - As one of the most common biopolymers on Earth, cellulose has found an important role in food industry, biomedicine andbiotechnology. The process of obtaining cellulose fibers is often followed with the presence of the byproduct, whose removal is required procedure. From that reason, the process of obtaining material on a bacterial cellulose (BC) basis,finds wide application in everyday life. Having in mind her many features, we have investigated the change in structure and morphology of BC depending on the synthesis parameters. The influence of the medium volume and different time intervals of NaOH treatment relative to different BCN yields and structure. The mentioned changes were examined by XRD, FTIR spectroscopy, as well as SEM and EDS analyzes.
PB  - Čačak : Univerzitet u Kragujevcu, Agronomski fakultet
C3  - Zbornik radova [Elektronski izvor] / XXVI savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 12 - 13. mart 2021. godine
T1  - Sinteza i struktura bakterijske celuloze primenom bakterija sirćetnog vrenja
SP  - 281
EP  - 289
DO  - 10.46793/SBT26.281J
UR  - https://hdl.handle.net/21.15107/rcub_dais_12356
ER  - 

@conference{
author = "Janićijević, Aleksandra and Filipović, Suzana and Pavlović, Vladimir B. and Sknepnek, Aleksandra and Kovačević, Danijela and Đorđević, Nenad and Mirković, Miljana and Živković, Predrag",
year = "2021",
abstract = "Kao jedan od najzastupljenijih biopolimera na Zemlji, celuloza je našla primenu u prehrambenoj industriji, biomedicini i biotehnologiji. Dobijanje celuloznih vlakana iz biljaka je praćeno prisustvom nusproizvoda, čije je uklanjanje zahtevan proces. Stoga, materijali na bazi bakterijske nanoceluloze (BCN), nalaze sve širu primenu u svakodnevnici. Imajući u vidu prednosti BCN, u ovom radu su ispitivane promene u strukturi i morfologiji BCN u funkciji parametara sinteze. Analiziran je uticaj vrste i zapremine medijuma, kao i dužine prečišćavanja u NaOH, na promene u prinosu i strukturi BCN. Navedene promene su ispitivane metodama XRD, FTIR, kao i primenom SEM i EDS analize., As one of the most common biopolymers on Earth, cellulose has found an important role in food industry, biomedicine andbiotechnology. The process of obtaining cellulose fibers is often followed with the presence of the byproduct, whose removal is required procedure. From that reason, the process of obtaining material on a bacterial cellulose (BC) basis,finds wide application in everyday life. Having in mind her many features, we have investigated the change in structure and morphology of BC depending on the synthesis parameters. The influence of the medium volume and different time intervals of NaOH treatment relative to different BCN yields and structure. The mentioned changes were examined by XRD, FTIR spectroscopy, as well as SEM and EDS analyzes.",
publisher = "Čačak : Univerzitet u Kragujevcu, Agronomski fakultet",
journal = "Zbornik radova [Elektronski izvor] / XXVI savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 12 - 13. mart 2021. godine",
title = "Sinteza i struktura bakterijske celuloze primenom bakterija sirćetnog vrenja",
pages = "281-289",
doi = "10.46793/SBT26.281J",
url = "https://hdl.handle.net/21.15107/rcub_dais_12356"
}

Janićijević, A., Filipović, S., Pavlović, V. B., Sknepnek, A., Kovačević, D., Đorđević, N., Mirković, M.,& Živković, P.. (2021). Sinteza i struktura bakterijske celuloze primenom bakterija sirćetnog vrenja. in Zbornik radova [Elektronski izvor] / XXVI savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 12 - 13. mart 2021. godine
Čačak : Univerzitet u Kragujevcu, Agronomski fakultet., 281-289.
https://doi.org/10.46793/SBT26.281J
https://hdl.handle.net/21.15107/rcub_dais_12356

Janićijević A, Filipović S, Pavlović VB, Sknepnek A, Kovačević D, Đorđević N, Mirković M, Živković P. Sinteza i struktura bakterijske celuloze primenom bakterija sirćetnog vrenja. in Zbornik radova [Elektronski izvor] / XXVI savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 12 - 13. mart 2021. godine. 2021;:281-289.
doi:10.46793/SBT26.281J
https://hdl.handle.net/21.15107/rcub_dais_12356 .

Janićijević, Aleksandra, Filipović, Suzana, Pavlović, Vladimir B., Sknepnek, Aleksandra, Kovačević, Danijela, Đorđević, Nenad, Mirković, Miljana, Živković, Predrag, "Sinteza i struktura bakterijske celuloze primenom bakterija sirćetnog vrenja" in Zbornik radova [Elektronski izvor] / XXVI savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 12 - 13. mart 2021. godine (2021):281-289,
https://doi.org/10.46793/SBT26.281J .,
https://hdl.handle.net/21.15107/rcub_dais_12356 .

TY  - CONF
AU  - Janićijević, Aleksandra
AU  - Pavlović, Vladimir B.
AU  - Sknepnek, A.
AU  - Mirković, M.
AU  - Kovačević, D.
AU  - Đorđević, Nataša
AU  - Filipović, Suzana
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11905
AB  - Cellulose is a biopolymer with a wide range of properties like biocompatibility, hydrophilicity, porosity, good mechanical properties, biodegradability and non-toxicity. The properties and application of cellulose based materials are related to the source of the cellulose production. Despite the fact that the plant cellulose is playing a leading role in obtaining cellulose fibers, it has been found that ecologically and economically, a better source for obtaining cellulose is by fermenting a particular strain of bacteria. Although bacterial nano cellulose (BCN) based materials can be used in numerous industries, from the paper and food industries to biomedicine, their application in electronics is limited because bacterial cellulose does not have conductive and ferromagnetic properties. Having this in mind in this research, the results of the development of nanocomposite materials based on BCN modified with Fe3O4 has been presented. The differences in the interaction of Fe3O4 nanoparticles and BCN obtained by varying precipitation parameters were investigated and the effect of reaction time was followed by SEM-EDS, XRD, and FTIR analysis. It has been found that this type of modifications of the initial BCN, enables development of new composite materials with superior properties, which can be used in various fields of electronics.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
T1  - Effect of prolonged precipitation on morphology and crystal struture of the bacterial nanocelulose/Fe3O4 composite
SP  - 55
EP  - 56
UR  - https://hdl.handle.net/21.15107/rcub_dais_11905
ER  - 

@conference{
author = "Janićijević, Aleksandra and Pavlović, Vladimir B. and Sknepnek, A. and Mirković, M. and Kovačević, D. and Đorđević, Nataša and Filipović, Suzana",
year = "2021",
abstract = "Cellulose is a biopolymer with a wide range of properties like biocompatibility, hydrophilicity, porosity, good mechanical properties, biodegradability and non-toxicity. The properties and application of cellulose based materials are related to the source of the cellulose production. Despite the fact that the plant cellulose is playing a leading role in obtaining cellulose fibers, it has been found that ecologically and economically, a better source for obtaining cellulose is by fermenting a particular strain of bacteria. Although bacterial nano cellulose (BCN) based materials can be used in numerous industries, from the paper and food industries to biomedicine, their application in electronics is limited because bacterial cellulose does not have conductive and ferromagnetic properties. Having this in mind in this research, the results of the development of nanocomposite materials based on BCN modified with Fe3O4 has been presented. The differences in the interaction of Fe3O4 nanoparticles and BCN obtained by varying precipitation parameters were investigated and the effect of reaction time was followed by SEM-EDS, XRD, and FTIR analysis. It has been found that this type of modifications of the initial BCN, enables development of new composite materials with superior properties, which can be used in various fields of electronics.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021",
title = "Effect of prolonged precipitation on morphology and crystal struture of the bacterial nanocelulose/Fe3O4 composite",
pages = "55-56",
url = "https://hdl.handle.net/21.15107/rcub_dais_11905"
}

Janićijević, A., Pavlović, V. B., Sknepnek, A., Mirković, M., Kovačević, D., Đorđević, N.,& Filipović, S.. (2021). Effect of prolonged precipitation on morphology and crystal struture of the bacterial nanocelulose/Fe3O4 composite. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
Belgrade : Serbian Ceramic Society., 55-56.
https://hdl.handle.net/21.15107/rcub_dais_11905

Janićijević A, Pavlović VB, Sknepnek A, Mirković M, Kovačević D, Đorđević N, Filipović S. Effect of prolonged precipitation on morphology and crystal struture of the bacterial nanocelulose/Fe3O4 composite. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021. 2021;:55-56.
https://hdl.handle.net/21.15107/rcub_dais_11905 .

Janićijević, Aleksandra, Pavlović, Vladimir B., Sknepnek, A., Mirković, M., Kovačević, D., Đorđević, Nataša, Filipović, Suzana, "Effect of prolonged precipitation on morphology and crystal struture of the bacterial nanocelulose/Fe3O4 composite" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021 (2021):55-56,
https://hdl.handle.net/21.15107/rcub_dais_11905 .