Počuča Nešić, Milica

Link to this page

Authority KeyName Variants
27e6f8a1-5304-47aa-be78-86806364086d
  • Počuča Nešić, Milica (2)
Projects

Author's Bibliography

Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods

Luković Golić, Danijela; Radojković, Aleksandar; Ćirković, Jovana; Dapčević, Aleksandra; Pajić, Damir; Tasić, Nikola B.; Savić, Slavica M.; Počuča Nešić, Milica; Marković, Smilja; Branković, Goran; Marinković Stanojević, Zorica; Branković, Zorica

(Elsevier, 2016)

TY  - JOUR
AU  - Luković Golić, Danijela
AU  - Radojković, Aleksandar
AU  - Ćirković, Jovana
AU  - Dapčević, Aleksandra
AU  - Pajić, Damir
AU  - Tasić, Nikola B.
AU  - Savić, Slavica M.
AU  - Počuča Nešić, Milica
AU  - Marković, Smilja
AU  - Branković, Goran
AU  - Marinković Stanojević, Zorica
AU  - Branković, Zorica
PY  - 2016
AB  - BiFeO3 powders were synthesized by sonochemically assisted hydrothermal and hydro-evaporation methods. The X-ray diffraction confirmed the presence of secondary phases, Bi25FeO39 and Bi2Fe4O9, in as prepared BiFeO3 powders. Optimization of sintering conditions indicated that temperature of 800 °C and time of 2 h after pressing at 9 t/cm2 provided ceramics samples with the highest density (up to 96% of theoretical density) and the lowest content of secondary phases. Ferroelectric and magnetic characterization was performed on two selected ceramics samples with the highest densities. Ceramics obtained from the powder synthesized by the hydrothermal method showed greater lattice distortion along [1 1 1] axis and smaller grains, which resulted in larger values of electric polarization at room temperature. It also exhibited less Fe(3d)–O(2p) orbital overlapping due to a larger FeOFe bond angle, causing lower antiferromagnetic ordering and weak ferromagnetic behavior at low temperatures.
PB  - Elsevier
T2  - Journal of the European Ceramic Society
T1  - Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods
SP  - 1623
EP  - 1631
VL  - 36
IS  - 7
DO  - 10.1016/j.jeurceramsoc.2016.01.031
UR  - https://hdl.handle.net/21.15107/rcub_dais_2320
ER  - 
@article{
author = "Luković Golić, Danijela and Radojković, Aleksandar and Ćirković, Jovana and Dapčević, Aleksandra and Pajić, Damir and Tasić, Nikola B. and Savić, Slavica M. and Počuča Nešić, Milica and Marković, Smilja and Branković, Goran and Marinković Stanojević, Zorica and Branković, Zorica",
year = "2016",
abstract = "BiFeO3 powders were synthesized by sonochemically assisted hydrothermal and hydro-evaporation methods. The X-ray diffraction confirmed the presence of secondary phases, Bi25FeO39 and Bi2Fe4O9, in as prepared BiFeO3 powders. Optimization of sintering conditions indicated that temperature of 800 °C and time of 2 h after pressing at 9 t/cm2 provided ceramics samples with the highest density (up to 96% of theoretical density) and the lowest content of secondary phases. Ferroelectric and magnetic characterization was performed on two selected ceramics samples with the highest densities. Ceramics obtained from the powder synthesized by the hydrothermal method showed greater lattice distortion along [1 1 1] axis and smaller grains, which resulted in larger values of electric polarization at room temperature. It also exhibited less Fe(3d)–O(2p) orbital overlapping due to a larger FeOFe bond angle, causing lower antiferromagnetic ordering and weak ferromagnetic behavior at low temperatures.",
publisher = "Elsevier",
journal = "Journal of the European Ceramic Society",
title = "Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods",
pages = "1623-1631",
volume = "36",
number = "7",
doi = "10.1016/j.jeurceramsoc.2016.01.031",
url = "https://hdl.handle.net/21.15107/rcub_dais_2320"
}
Luković Golić, D., Radojković, A., Ćirković, J., Dapčević, A., Pajić, D., Tasić, N. B., Savić, S. M., Počuča Nešić, M., Marković, S., Branković, G., Marinković Stanojević, Z.,& Branković, Z. (2016). Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods.
Journal of the European Ceramic Society
Elsevier., 36(7), 1623-1631.
https://doi.org/10.1016/j.jeurceramsoc.2016.01.031
Luković Golić D, Radojković A, Ćirković J, Dapčević A, Pajić D, Tasić NB, Savić SM, Počuča Nešić M, Marković S, Branković G, Marinković Stanojević Z, Branković Z. Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods. Journal of the European Ceramic Society. 2016;36(7):1623-1631.
doi:10.1016/j.jeurceramsoc.2016.01.031.
Luković Golić Danijela, Radojković Aleksandar, Ćirković Jovana, Dapčević Aleksandra, Pajić Damir, Tasić Nikola B., Savić Slavica M., Počuča Nešić Milica, Marković Smilja, Branković Goran, Marinković Stanojević Zorica, Branković Zorica, "Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods" Journal of the European Ceramic Society, 36, no. 7 (2016):1623-1631,
https://doi.org/10.1016/j.jeurceramsoc.2016.01.031 .
19
20
20

Mechanochemical synthesis of multiferroic yttrium manganite

Marinković Stanojević, Zorica; Počuča Nešić, Milica; Branković, Zorica; Mančić, Lidija; Bernik, Slavko; Rečnik, A.; Branković, Goran

(Belgrade : Materials Research Society of Serbia, 2011)

TY  - CONF
AU  - Marinković Stanojević, Zorica
AU  - Počuča Nešić, Milica
AU  - Branković, Zorica
AU  - Mančić, Lidija
AU  - Bernik, Slavko
AU  - Rečnik, A.
AU  - Branković, Goran
PY  - 2011
AB  - Multiferroic yttrium manganite (YMnO3) is known as a material that exhibits both ferromagnetic and ferroelectric properties making it interesting for various technological applications. In this work single-phased YMnO3 was prepared for the first time by mechanochemical synthesis in a planetary ball mill. The YMnO3 can be formed directly from the highly activated constituent oxides, Y2O3 and Mn2O3, after 60 min of milling time and subsequently grows during prolonged milling. The cumulative energy introduced into the system during milling for 60 min was 86 kJ/g. X-ray analysis indicates that the as-prepared samples crystallize majority with hexagonal (P63cm) and minorly with orthorhombic (Pnma) YMnO3 structure. The morphology, structure and chemical composition of the powder were investigated by SEM with EDS and TEM. The magnetic properties of the obtained YMnO3 powders were found to change as a function of milling time in a manner consistent with the variation in the nanocomposite microstructure.
PB  - Belgrade : Materials Research Society of Serbia
C3  - VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts
T1  - Mechanochemical synthesis of multiferroic yttrium manganite
SP  - 83
EP  - 83
UR  - https://hdl.handle.net/21.15107/rcub_dais_671
ER  - 
@conference{
author = "Marinković Stanojević, Zorica and Počuča Nešić, Milica and Branković, Zorica and Mančić, Lidija and Bernik, Slavko and Rečnik, A. and Branković, Goran",
year = "2011",
abstract = "Multiferroic yttrium manganite (YMnO3) is known as a material that exhibits both ferromagnetic and ferroelectric properties making it interesting for various technological applications. In this work single-phased YMnO3 was prepared for the first time by mechanochemical synthesis in a planetary ball mill. The YMnO3 can be formed directly from the highly activated constituent oxides, Y2O3 and Mn2O3, after 60 min of milling time and subsequently grows during prolonged milling. The cumulative energy introduced into the system during milling for 60 min was 86 kJ/g. X-ray analysis indicates that the as-prepared samples crystallize majority with hexagonal (P63cm) and minorly with orthorhombic (Pnma) YMnO3 structure. The morphology, structure and chemical composition of the powder were investigated by SEM with EDS and TEM. The magnetic properties of the obtained YMnO3 powders were found to change as a function of milling time in a manner consistent with the variation in the nanocomposite microstructure.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts",
title = "Mechanochemical synthesis of multiferroic yttrium manganite",
pages = "83-83",
url = "https://hdl.handle.net/21.15107/rcub_dais_671"
}
Marinković Stanojević, Z., Počuča Nešić, M., Branković, Z., Mančić, L., Bernik, S., Rečnik, A.,& Branković, G. (2011). Mechanochemical synthesis of multiferroic yttrium manganite.
VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts
Belgrade : Materials Research Society of Serbia., 83-83.
Marinković Stanojević Z, Počuča Nešić M, Branković Z, Mančić L, Bernik S, Rečnik A, Branković G. Mechanochemical synthesis of multiferroic yttrium manganite. VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts. 2011;:83-83.
Marinković Stanojević Zorica, Počuča Nešić Milica, Branković Zorica, Mančić Lidija, Bernik Slavko, Rečnik A., Branković Goran, "Mechanochemical synthesis of multiferroic yttrium manganite" VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts (2011):83-83