TY  - JOUR
AU  - Janićijević, Aleksandra
AU  - Pavlović, Vera P.
AU  - Kovačević, Danijela
AU  - Đorđević, Nenad
AU  - Marinković, Aleksandar
AU  - Vlahović, Branislav
AU  - Karoui, Abdennaceur
AU  - Pavlović, Vladimir B.
AU  - Filipović, Suzana
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/16160
AB  - The hybrid multifunctional magnetic organic/inorganic composite materials, with addition of optimal filler type and quantities are attractive due to wide range of potential application, from various pressure sensors, through smart packaging, to tissue engineering and medicine. The structural, morphological and magnetic properties of polyvinylidene fluoride/nanocellulose/magnetite@BaTiO3 hybrid films were investigated. The presented study revealed significant impact of nanocellulose (NC) content on formation of the polymorphs of PVDF, responsible for ferro-, piezo- and pyroelectric properties. The structural characterization, XRD and Raman measurements confirmed enhancement of the β and γ phases when the loading of NC higher then 4 wt% in multi-component hybrid films. The saturation magnetization value gradually raises with increasing amount of NC and reaches its maximum value of 41.2 emu/g at content of 4 wt% NC. Further, addition of NC decreases saturation magnetization value regardless of constant amount of magnetite, indicating optimal content of NC substrate for co-precipitation of Fe3O4 onto NC matrix.
PB  - Springer
T2  - Journal of Inorganic and Organometallic Polymers and Materials
T1  - Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material
DO  - 10.1007/s10904-023-02953-w
UR  - https://hdl.handle.net/21.15107/rcub_dais_16160
ER  - 

@article{
author = "Janićijević, Aleksandra and Pavlović, Vera P. and Kovačević, Danijela and Đorđević, Nenad and Marinković, Aleksandar and Vlahović, Branislav and Karoui, Abdennaceur and Pavlović, Vladimir B. and Filipović, Suzana",
year = "2023",
abstract = "The hybrid multifunctional magnetic organic/inorganic composite materials, with addition of optimal filler type and quantities are attractive due to wide range of potential application, from various pressure sensors, through smart packaging, to tissue engineering and medicine. The structural, morphological and magnetic properties of polyvinylidene fluoride/nanocellulose/magnetite@BaTiO3 hybrid films were investigated. The presented study revealed significant impact of nanocellulose (NC) content on formation of the polymorphs of PVDF, responsible for ferro-, piezo- and pyroelectric properties. The structural characterization, XRD and Raman measurements confirmed enhancement of the β and γ phases when the loading of NC higher then 4 wt% in multi-component hybrid films. The saturation magnetization value gradually raises with increasing amount of NC and reaches its maximum value of 41.2 emu/g at content of 4 wt% NC. Further, addition of NC decreases saturation magnetization value regardless of constant amount of magnetite, indicating optimal content of NC substrate for co-precipitation of Fe3O4 onto NC matrix.",
publisher = "Springer",
journal = "Journal of Inorganic and Organometallic Polymers and Materials",
title = "Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material",
doi = "10.1007/s10904-023-02953-w",
url = "https://hdl.handle.net/21.15107/rcub_dais_16160"
}

Janićijević, A., Pavlović, V. P., Kovačević, D., Đorđević, N., Marinković, A., Vlahović, B., Karoui, A., Pavlović, V. B.,& Filipović, S.. (2023). Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material. in Journal of Inorganic and Organometallic Polymers and Materials
Springer..
https://doi.org/10.1007/s10904-023-02953-w
https://hdl.handle.net/21.15107/rcub_dais_16160

Janićijević A, Pavlović VP, Kovačević D, Đorđević N, Marinković A, Vlahović B, Karoui A, Pavlović VB, Filipović S. Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material. in Journal of Inorganic and Organometallic Polymers and Materials. 2023;.
doi:10.1007/s10904-023-02953-w
https://hdl.handle.net/21.15107/rcub_dais_16160 .

Janićijević, Aleksandra, Pavlović, Vera P., Kovačević, Danijela, Đorđević, Nenad, Marinković, Aleksandar, Vlahović, Branislav, Karoui, Abdennaceur, Pavlović, Vladimir B., Filipović, Suzana, "Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material" in Journal of Inorganic and Organometallic Polymers and Materials (2023),
https://doi.org/10.1007/s10904-023-02953-w .,
https://hdl.handle.net/21.15107/rcub_dais_16160 .

TY  - JOUR
AU  - Janićijević, Aleksandra
AU  - Pavlović, Vera P.
AU  - Kovačević, Danijela
AU  - Đorđević, Nenad
AU  - Marinković, Aleksandar
AU  - Vlahović, Branislav
AU  - Karoui, Abdennaceur
AU  - Pavlović, Vladimir B.
AU  - Filipović, Suzana
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/16160
UR  - https://dais.sanu.ac.rs/123456789/16161
AB  - The hybrid multifunctional magnetic organic/inorganic composite materials, with addition of optimal filler type and quantities are attractive due to wide range of potential application, from various pressure sensors, through smart packaging, to tissue engineering and medicine. The structural, morphological and magnetic properties of polyvinylidene fluoride/nanocellulose/magnetite@BaTiO3 hybrid films were investigated. The presented study revealed significant impact of nanocellulose (NC) content on formation of the polymorphs of PVDF, responsible for ferro-, piezo- and pyroelectric properties. The structural characterization, XRD and Raman measurements confirmed enhancement of the β and γ phases when the loading of NC higher then 4 wt% in multi-component hybrid films. The saturation magnetization value gradually raises with increasing amount of NC and reaches its maximum value of 41.2 emu/g at content of 4 wt% NC. Further, addition of NC decreases saturation magnetization value regardless of constant amount of magnetite, indicating optimal content of NC substrate for co-precipitation of Fe3O4 onto NC matrix.
PB  - Springer
T2  - Journal of Inorganic and Organometallic Polymers and Materials
T1  - Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material
DO  - 10.1007/s10904-023-02953-w
UR  - https://hdl.handle.net/21.15107/rcub_dais_16161
ER  - 

@article{
author = "Janićijević, Aleksandra and Pavlović, Vera P. and Kovačević, Danijela and Đorđević, Nenad and Marinković, Aleksandar and Vlahović, Branislav and Karoui, Abdennaceur and Pavlović, Vladimir B. and Filipović, Suzana",
year = "2023",
abstract = "The hybrid multifunctional magnetic organic/inorganic composite materials, with addition of optimal filler type and quantities are attractive due to wide range of potential application, from various pressure sensors, through smart packaging, to tissue engineering and medicine. The structural, morphological and magnetic properties of polyvinylidene fluoride/nanocellulose/magnetite@BaTiO3 hybrid films were investigated. The presented study revealed significant impact of nanocellulose (NC) content on formation of the polymorphs of PVDF, responsible for ferro-, piezo- and pyroelectric properties. The structural characterization, XRD and Raman measurements confirmed enhancement of the β and γ phases when the loading of NC higher then 4 wt% in multi-component hybrid films. The saturation magnetization value gradually raises with increasing amount of NC and reaches its maximum value of 41.2 emu/g at content of 4 wt% NC. Further, addition of NC decreases saturation magnetization value regardless of constant amount of magnetite, indicating optimal content of NC substrate for co-precipitation of Fe3O4 onto NC matrix.",
publisher = "Springer",
journal = "Journal of Inorganic and Organometallic Polymers and Materials",
title = "Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material",
doi = "10.1007/s10904-023-02953-w",
url = "https://hdl.handle.net/21.15107/rcub_dais_16161"
}

Janićijević, A., Pavlović, V. P., Kovačević, D., Đorđević, N., Marinković, A., Vlahović, B., Karoui, A., Pavlović, V. B.,& Filipović, S.. (2023). Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material. in Journal of Inorganic and Organometallic Polymers and Materials
Springer..
https://doi.org/10.1007/s10904-023-02953-w
https://hdl.handle.net/21.15107/rcub_dais_16161

Janićijević A, Pavlović VP, Kovačević D, Đorđević N, Marinković A, Vlahović B, Karoui A, Pavlović VB, Filipović S. Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material. in Journal of Inorganic and Organometallic Polymers and Materials. 2023;.
doi:10.1007/s10904-023-02953-w
https://hdl.handle.net/21.15107/rcub_dais_16161 .

Janićijević, Aleksandra, Pavlović, Vera P., Kovačević, Danijela, Đorđević, Nenad, Marinković, Aleksandar, Vlahović, Branislav, Karoui, Abdennaceur, Pavlović, Vladimir B., Filipović, Suzana, "Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material" in Journal of Inorganic and Organometallic Polymers and Materials (2023),
https://doi.org/10.1007/s10904-023-02953-w .,
https://hdl.handle.net/21.15107/rcub_dais_16161 .

TY  - JOUR
AU  - Janićijević, Aleksandra
AU  - Pavlović, Vera P.
AU  - Kovačević, Danijela
AU  - Perić, Marko
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
AU  - Filipović, Suzana
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13152
AB  - The rise of innovation in the electrical industry is driven by the controlled design of new materials. The hybrid materials based on magnetite/nanocellulose are highly interesting due to their various applications in medicine, ecology, catalysis and electronics. In this study, the structure and morphology of nanocellulose/magnetite hybrid nanomaterials were investigated. The effect of nanocellulose loading on the crystal structure of synthesized composites was investigated by XRD and FTIR methods. The presented study reveals that the interaction between the cellulose and magnetic nanoparticles depends on the nanocellulose content. Further, a transition from cellulose II to cellulose I allomorph is observed. SEM and EDS are employed to determine the variation in morphology with changes in component concentrations. By the calculation of magnetic interactions between adjacent Fe3+ and Fe2+ ions within composites, it is determined that ferromagnetic coupling predominates.
T2  - Polymers
T1  - Structural Characterization of Nanocellulose/Fe3O4 Hybrid Nanomaterials
SP  - 1819
VL  - 14
IS  - 9
DO  - 10.3390/polym14091819
UR  - https://hdl.handle.net/21.15107/rcub_dais_13152
ER  - 

@article{
author = "Janićijević, Aleksandra and Pavlović, Vera P. and Kovačević, Danijela and Perić, Marko and Vlahović, Branislav and Pavlović, Vladimir B. and Filipović, Suzana",
year = "2022",
abstract = "The rise of innovation in the electrical industry is driven by the controlled design of new materials. The hybrid materials based on magnetite/nanocellulose are highly interesting due to their various applications in medicine, ecology, catalysis and electronics. In this study, the structure and morphology of nanocellulose/magnetite hybrid nanomaterials were investigated. The effect of nanocellulose loading on the crystal structure of synthesized composites was investigated by XRD and FTIR methods. The presented study reveals that the interaction between the cellulose and magnetic nanoparticles depends on the nanocellulose content. Further, a transition from cellulose II to cellulose I allomorph is observed. SEM and EDS are employed to determine the variation in morphology with changes in component concentrations. By the calculation of magnetic interactions between adjacent Fe3+ and Fe2+ ions within composites, it is determined that ferromagnetic coupling predominates.",
journal = "Polymers",
title = "Structural Characterization of Nanocellulose/Fe3O4 Hybrid Nanomaterials",
pages = "1819",
volume = "14",
number = "9",
doi = "10.3390/polym14091819",
url = "https://hdl.handle.net/21.15107/rcub_dais_13152"
}

Janićijević, A., Pavlović, V. P., Kovačević, D., Perić, M., Vlahović, B., Pavlović, V. B.,& Filipović, S.. (2022). Structural Characterization of Nanocellulose/Fe3O4 Hybrid Nanomaterials. in Polymers, 14(9), 1819.
https://doi.org/10.3390/polym14091819
https://hdl.handle.net/21.15107/rcub_dais_13152

Janićijević A, Pavlović VP, Kovačević D, Perić M, Vlahović B, Pavlović VB, Filipović S. Structural Characterization of Nanocellulose/Fe3O4 Hybrid Nanomaterials. in Polymers. 2022;14(9):1819.
doi:10.3390/polym14091819
https://hdl.handle.net/21.15107/rcub_dais_13152 .

Janićijević, Aleksandra, Pavlović, Vera P., Kovačević, Danijela, Perić, Marko, Vlahović, Branislav, Pavlović, Vladimir B., Filipović, Suzana, "Structural Characterization of Nanocellulose/Fe3O4 Hybrid Nanomaterials" in Polymers, 14, no. 9 (2022):1819,
https://doi.org/10.3390/polym14091819 .,
https://hdl.handle.net/21.15107/rcub_dais_13152 .

TY  - CONF
AU  - Janićijević, Aleksandra
AU  - Filipović, Suzana
AU  - Pavlović, Vladimir B.
AU  - Sknepnek, Aleksandra
AU  - Kovačević, Danijela
AU  - Đorđević, Nenad
AU  - Mirković, Miljana
AU  - Živković, Predrag
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12356
AB  - Kao jedan od najzastupljenijih biopolimera na Zemlji, celuloza je našla primenu u prehrambenoj industriji, biomedicini i biotehnologiji. Dobijanje celuloznih vlakana iz biljaka je praćeno prisustvom nusproizvoda, čije je uklanjanje zahtevan proces. Stoga, materijali na bazi bakterijske nanoceluloze (BCN), nalaze sve širu primenu u svakodnevnici. Imajući u vidu prednosti BCN, u ovom radu su ispitivane promene u strukturi i morfologiji BCN u funkciji parametara sinteze. Analiziran je uticaj vrste i zapremine medijuma, kao i dužine prečišćavanja u NaOH, na promene u prinosu i strukturi BCN. Navedene promene su ispitivane metodama XRD, FTIR, kao i primenom SEM i EDS analize.
AB  - As one of the most common biopolymers on Earth, cellulose has found an important role in food industry, biomedicine andbiotechnology. The process of obtaining cellulose fibers is often followed with the presence of the byproduct, whose removal is required procedure. From that reason, the process of obtaining material on a bacterial cellulose (BC) basis,finds wide application in everyday life. Having in mind her many features, we have investigated the change in structure and morphology of BC depending on the synthesis parameters. The influence of the medium volume and different time intervals of NaOH treatment relative to different BCN yields and structure. The mentioned changes were examined by XRD, FTIR spectroscopy, as well as SEM and EDS analyzes.
PB  - Čačak : Univerzitet u Kragujevcu, Agronomski fakultet
C3  - Zbornik radova [Elektronski izvor] / XXVI savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 12 - 13. mart 2021. godine
T1  - Sinteza i struktura bakterijske celuloze primenom bakterija sirćetnog vrenja
SP  - 281
EP  - 289
DO  - 10.46793/SBT26.281J
UR  - https://hdl.handle.net/21.15107/rcub_dais_12356
ER  - 

@conference{
author = "Janićijević, Aleksandra and Filipović, Suzana and Pavlović, Vladimir B. and Sknepnek, Aleksandra and Kovačević, Danijela and Đorđević, Nenad and Mirković, Miljana and Živković, Predrag",
year = "2021",
abstract = "Kao jedan od najzastupljenijih biopolimera na Zemlji, celuloza je našla primenu u prehrambenoj industriji, biomedicini i biotehnologiji. Dobijanje celuloznih vlakana iz biljaka je praćeno prisustvom nusproizvoda, čije je uklanjanje zahtevan proces. Stoga, materijali na bazi bakterijske nanoceluloze (BCN), nalaze sve širu primenu u svakodnevnici. Imajući u vidu prednosti BCN, u ovom radu su ispitivane promene u strukturi i morfologiji BCN u funkciji parametara sinteze. Analiziran je uticaj vrste i zapremine medijuma, kao i dužine prečišćavanja u NaOH, na promene u prinosu i strukturi BCN. Navedene promene su ispitivane metodama XRD, FTIR, kao i primenom SEM i EDS analize., As one of the most common biopolymers on Earth, cellulose has found an important role in food industry, biomedicine andbiotechnology. The process of obtaining cellulose fibers is often followed with the presence of the byproduct, whose removal is required procedure. From that reason, the process of obtaining material on a bacterial cellulose (BC) basis,finds wide application in everyday life. Having in mind her many features, we have investigated the change in structure and morphology of BC depending on the synthesis parameters. The influence of the medium volume and different time intervals of NaOH treatment relative to different BCN yields and structure. The mentioned changes were examined by XRD, FTIR spectroscopy, as well as SEM and EDS analyzes.",
publisher = "Čačak : Univerzitet u Kragujevcu, Agronomski fakultet",
journal = "Zbornik radova [Elektronski izvor] / XXVI savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 12 - 13. mart 2021. godine",
title = "Sinteza i struktura bakterijske celuloze primenom bakterija sirćetnog vrenja",
pages = "281-289",
doi = "10.46793/SBT26.281J",
url = "https://hdl.handle.net/21.15107/rcub_dais_12356"
}

Janićijević, A., Filipović, S., Pavlović, V. B., Sknepnek, A., Kovačević, D., Đorđević, N., Mirković, M.,& Živković, P.. (2021). Sinteza i struktura bakterijske celuloze primenom bakterija sirćetnog vrenja. in Zbornik radova [Elektronski izvor] / XXVI savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 12 - 13. mart 2021. godine
Čačak : Univerzitet u Kragujevcu, Agronomski fakultet., 281-289.
https://doi.org/10.46793/SBT26.281J
https://hdl.handle.net/21.15107/rcub_dais_12356

Janićijević A, Filipović S, Pavlović VB, Sknepnek A, Kovačević D, Đorđević N, Mirković M, Živković P. Sinteza i struktura bakterijske celuloze primenom bakterija sirćetnog vrenja. in Zbornik radova [Elektronski izvor] / XXVI savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 12 - 13. mart 2021. godine. 2021;:281-289.
doi:10.46793/SBT26.281J
https://hdl.handle.net/21.15107/rcub_dais_12356 .

Janićijević, Aleksandra, Filipović, Suzana, Pavlović, Vladimir B., Sknepnek, Aleksandra, Kovačević, Danijela, Đorđević, Nenad, Mirković, Miljana, Živković, Predrag, "Sinteza i struktura bakterijske celuloze primenom bakterija sirćetnog vrenja" in Zbornik radova [Elektronski izvor] / XXVI savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 12 - 13. mart 2021. godine (2021):281-289,
https://doi.org/10.46793/SBT26.281J .,
https://hdl.handle.net/21.15107/rcub_dais_12356 .