Trajković, Isaak

Link to this page

Authority KeyName Variants
5c0b5009-2324-43b4-a8fc-507f1a7b53f1
  • Trajković, Isaak (2)
Projects

Author's Bibliography

Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent

Popović, Mina; Veličković, Zlate S.; Bogdanov, Jovica; Marinković, Aleksandar D.; Luna, Mariano Casas; Trajković, Isaak; Obradović, Nina; Pavlović, Vladimir B.

(International Institute for the Science of Sintering (IISS), 2022)

TY  - JOUR
AU  - Popović, Mina
AU  - Veličković, Zlate S.
AU  - Bogdanov, Jovica
AU  - Marinković, Aleksandar D.
AU  - Luna, Mariano Casas
AU  - Trajković, Isaak
AU  - Obradović, Nina
AU  - Pavlović, Vladimir B.
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/12955
AB  - In this study, the structure, morphology and composition of the synthesized magnetite/3D-printed wollastonite (3D_W/M) composite were characterized, and its adsorption performance with respect to As(V) and Cr(VI) were studied. Magnetite (MG) modified 3D printed wollastonite was obtained by two step procedure: modification of 3D_W with 3-aminoproylsilane (APTES) followed by controlled magnetite (MG) deposition to obtain 3D_W/M adsorbent. The structure/properties of 3D_W/M were confirmed by applying FTIR, XRD, TGD/DTA, and SEM analysis. The adsorption properties of hybrid adsorbents were carried out for As(V) and Cr(VI) removal-one relative to the initial pH value, the adsorbent mass, the temperature, and the adsorption time. Time-dependent adsorption study was best described by pseudo-second order equation, while Weber Morris analysis showed that intraparticle diffusion controled diffusional transport. Similar activation energy, 17.44 and 14.49 kJ•mol-1 for adsorption As(V) and Cr(VI) on 3D_W/M, respectively, indicated main contribution of physical adsorption. Determination of adsorption parameters was performed by applying different adsorption isotherm models, and the best fit was obtained using Freundlich model. The adsorption capacity of 24.16 and 29.6 mg g-1 for As(V) and Cr(VI) at 2o C, Co = 5.5 and 5.3 mg L-1, respectively, were obtained. Thermodynamic study indicated favourable process at a higher temperature. Preliminary fixed-bed column study and results fitting with Bohart-Adams, Yoon-Nelson, Thomas, and Modified dose-response model showed good agreement with results from the batch study.
PB  - International Institute for the Science of Sintering (IISS)
T2  - Science of Sintering
T1  - Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent
SP  - 105
EP  - 124
VL  - 54
IS  - 1
DO  - 10.2298/SOS2201105P
UR  - https://hdl.handle.net/21.15107/rcub_dais_12955
ER  - 
@article{
author = "Popović, Mina and Veličković, Zlate S. and Bogdanov, Jovica and Marinković, Aleksandar D. and Luna, Mariano Casas and Trajković, Isaak and Obradović, Nina and Pavlović, Vladimir B.",
year = "2022",
abstract = "In this study, the structure, morphology and composition of the synthesized magnetite/3D-printed wollastonite (3D_W/M) composite were characterized, and its adsorption performance with respect to As(V) and Cr(VI) were studied. Magnetite (MG) modified 3D printed wollastonite was obtained by two step procedure: modification of 3D_W with 3-aminoproylsilane (APTES) followed by controlled magnetite (MG) deposition to obtain 3D_W/M adsorbent. The structure/properties of 3D_W/M were confirmed by applying FTIR, XRD, TGD/DTA, and SEM analysis. The adsorption properties of hybrid adsorbents were carried out for As(V) and Cr(VI) removal-one relative to the initial pH value, the adsorbent mass, the temperature, and the adsorption time. Time-dependent adsorption study was best described by pseudo-second order equation, while Weber Morris analysis showed that intraparticle diffusion controled diffusional transport. Similar activation energy, 17.44 and 14.49 kJ•mol-1 for adsorption As(V) and Cr(VI) on 3D_W/M, respectively, indicated main contribution of physical adsorption. Determination of adsorption parameters was performed by applying different adsorption isotherm models, and the best fit was obtained using Freundlich model. The adsorption capacity of 24.16 and 29.6 mg g-1 for As(V) and Cr(VI) at 2o C, Co = 5.5 and 5.3 mg L-1, respectively, were obtained. Thermodynamic study indicated favourable process at a higher temperature. Preliminary fixed-bed column study and results fitting with Bohart-Adams, Yoon-Nelson, Thomas, and Modified dose-response model showed good agreement with results from the batch study.",
publisher = "International Institute for the Science of Sintering (IISS)",
journal = "Science of Sintering",
title = "Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent",
pages = "105-124",
volume = "54",
number = "1",
doi = "10.2298/SOS2201105P",
url = "https://hdl.handle.net/21.15107/rcub_dais_12955"
}
Popović, M., Veličković, Z. S., Bogdanov, J., Marinković, A. D., Luna, M. C., Trajković, I., Obradović, N.,& Pavlović, V. B.. (2022). Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent. in Science of Sintering
International Institute for the Science of Sintering (IISS)., 54(1), 105-124.
https://doi.org/10.2298/SOS2201105P
https://hdl.handle.net/21.15107/rcub_dais_12955
Popović M, Veličković ZS, Bogdanov J, Marinković AD, Luna MC, Trajković I, Obradović N, Pavlović VB. Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent. in Science of Sintering. 2022;54(1):105-124.
doi:10.2298/SOS2201105P
https://hdl.handle.net/21.15107/rcub_dais_12955 .
Popović, Mina, Veličković, Zlate S., Bogdanov, Jovica, Marinković, Aleksandar D., Luna, Mariano Casas, Trajković, Isaak, Obradović, Nina, Pavlović, Vladimir B., "Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent" in Science of Sintering, 54, no. 1 (2022):105-124,
https://doi.org/10.2298/SOS2201105P .,
https://hdl.handle.net/21.15107/rcub_dais_12955 .
1

Application of magnetite/3D-printed wollastonite hybrid sorbent for As(V) removal from water

Trajković, Isaak; Obradović, Nina; Marinković, Aleksandar; Casas Luna, Mariano; Pavlović, Vladimir B.

(Belgrade : Serbian Ceramic Society, 2019)

TY  - CONF
AU  - Trajković, Isaak
AU  - Obradović, Nina
AU  - Marinković, Aleksandar
AU  - Casas Luna, Mariano
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/6920
AB  - The maximal allowed concentration (MAC) for As(V) in water decreased from 50 to 10 μg/l, by considering the harmful effects of arsenic on the environment and human health. In order to achieve the established rigorous requirements, it is necessary to develop new materials and design new forms of adsorbents that can reduce the concentration of arsenic in drinking water. In this paper, the synthesized magnetite/3D-printed wollastonite hybrid sorbent was used to remove As(V) from aqueous solutions. 3D-printed wollastonite was obtained using the 3D-printing technique from methylhydrocyclosiloxane and calcium carbonate as precursors. Synthesis of adsorption material was carried out by depositing magnetite from an iron(II)-sulfate solution by potassium hydroxide on 3D-printed wollastonite. The adsorption properties of the hybrid adsorbent depend on the properties of magnetite and its porosity. This could be achieved by modifying the processes of depositing magnetite on the porous 3D-printed wollastonite. Characterization of the obtained material was performed using FTIR, SEM and TG-DTA. An investigation of the sorption properties of hybrid adsorbents was carried out for As(V) removal - one relative to the starting pH value of the solution, the adsorbent mass, the temperature and the adsorption time. Determination of adsorption parameters was performed by applying Langmuir, Freundlich and Dubinin- Radushkevich equations. Kinetics, using pseudo-first, pseudo-second and second order equations, as well as diffusion rate were determined using Veber-Moris and HSDM models. Determination of kinetics and adhesion parameters at three different temperatures enabled the calculation of thermodynamic and activation parameters of the adsorption process, which contributed to a better understanding of the adsorption mechanism.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019
T1  - Application of magnetite/3D-printed wollastonite hybrid sorbent for As(V) removal from water
SP  - 52
EP  - 52
UR  - https://hdl.handle.net/21.15107/rcub_dais_6920
ER  - 
@conference{
author = "Trajković, Isaak and Obradović, Nina and Marinković, Aleksandar and Casas Luna, Mariano and Pavlović, Vladimir B.",
year = "2019",
abstract = "The maximal allowed concentration (MAC) for As(V) in water decreased from 50 to 10 μg/l, by considering the harmful effects of arsenic on the environment and human health. In order to achieve the established rigorous requirements, it is necessary to develop new materials and design new forms of adsorbents that can reduce the concentration of arsenic in drinking water. In this paper, the synthesized magnetite/3D-printed wollastonite hybrid sorbent was used to remove As(V) from aqueous solutions. 3D-printed wollastonite was obtained using the 3D-printing technique from methylhydrocyclosiloxane and calcium carbonate as precursors. Synthesis of adsorption material was carried out by depositing magnetite from an iron(II)-sulfate solution by potassium hydroxide on 3D-printed wollastonite. The adsorption properties of the hybrid adsorbent depend on the properties of magnetite and its porosity. This could be achieved by modifying the processes of depositing magnetite on the porous 3D-printed wollastonite. Characterization of the obtained material was performed using FTIR, SEM and TG-DTA. An investigation of the sorption properties of hybrid adsorbents was carried out for As(V) removal - one relative to the starting pH value of the solution, the adsorbent mass, the temperature and the adsorption time. Determination of adsorption parameters was performed by applying Langmuir, Freundlich and Dubinin- Radushkevich equations. Kinetics, using pseudo-first, pseudo-second and second order equations, as well as diffusion rate were determined using Veber-Moris and HSDM models. Determination of kinetics and adhesion parameters at three different temperatures enabled the calculation of thermodynamic and activation parameters of the adsorption process, which contributed to a better understanding of the adsorption mechanism.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019",
title = "Application of magnetite/3D-printed wollastonite hybrid sorbent for As(V) removal from water",
pages = "52-52",
url = "https://hdl.handle.net/21.15107/rcub_dais_6920"
}
Trajković, I., Obradović, N., Marinković, A., Casas Luna, M.,& Pavlović, V. B.. (2019). Application of magnetite/3D-printed wollastonite hybrid sorbent for As(V) removal from water. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019
Belgrade : Serbian Ceramic Society., 52-52.
https://hdl.handle.net/21.15107/rcub_dais_6920
Trajković I, Obradović N, Marinković A, Casas Luna M, Pavlović VB. Application of magnetite/3D-printed wollastonite hybrid sorbent for As(V) removal from water. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019. 2019;:52-52.
https://hdl.handle.net/21.15107/rcub_dais_6920 .
Trajković, Isaak, Obradović, Nina, Marinković, Aleksandar, Casas Luna, Mariano, Pavlović, Vladimir B., "Application of magnetite/3D-printed wollastonite hybrid sorbent for As(V) removal from water" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019 (2019):52-52,
https://hdl.handle.net/21.15107/rcub_dais_6920 .