TY  - JOUR
AU  - Georgijević, Radovan
AU  - Vujković, Milica
AU  - Gutić, Sanjin
AU  - Aliefendić, Meho
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
AU  - Đokić, Veljko
AU  - Mentus, Slavko
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0925838818339185
UR  - https://dais.sanu.ac.rs/123456789/4568
AB  - To contribute to the knowledge on the influence of synthesis procedure on the intercalation kinetics of lithium ions into phospho-olivines, LiFePO4/C composite samples (LFPC) were synthesized in two ways, the first one in a sol-gel procedure (SG), and the other in a solid-state reaction (SS). The X-ray diffractograms (XRD) of both samples overlapped with that of pure LiFePO4, taken from the crystallographic database. Scanning electron microscopy pictures indicated the high degree of interparticle sintering, which caused a considerable agglomerate growth. The results of potentiodynamic measurements in aqueous LiNO3 solution revealed that for SS sample, three times higher initial capacity from that of SG one, (amounting to 74 mAh g−1 at 5 mV s−1). However, capacity fade on rising scan rate is much more expressed for SS sample than for SG one. We suggest that a different degree of material utilization due to the incomplete coverage of olivine particles by carbon explains this difference. The technique of separation of diffusion and capacitance currents was applied in a kinetic analysis, but it was shown to be inappropriate. We suggest the inapplicability of classic CV theory to the intercalation system accompanied by phase transition. Instead, a model of ohmic resistance determination of process kinetics was considered. LFPC-SS sample delivers three times larger capacity in LiNO3, amounting to 74 mAh g−1 at 1 mV s−1.
PB  - Elsevier
T2  - Journal of Alloys and Compounds
T1  - The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution
SP  - 475
EP  - 485
VL  - 776
DO  - 10.1016/j.jallcom.2018.10.246
UR  - https://hdl.handle.net/21.15107/rcub_dais_4568
ER  - 

@article{
author = "Georgijević, Radovan and Vujković, Milica and Gutić, Sanjin and Aliefendić, Meho and Jugović, Dragana and Mitrić, Miodrag and Đokić, Veljko and Mentus, Slavko",
year = "2019",
abstract = "To contribute to the knowledge on the influence of synthesis procedure on the intercalation kinetics of lithium ions into phospho-olivines, LiFePO4/C composite samples (LFPC) were synthesized in two ways, the first one in a sol-gel procedure (SG), and the other in a solid-state reaction (SS). The X-ray diffractograms (XRD) of both samples overlapped with that of pure LiFePO4, taken from the crystallographic database. Scanning electron microscopy pictures indicated the high degree of interparticle sintering, which caused a considerable agglomerate growth. The results of potentiodynamic measurements in aqueous LiNO3 solution revealed that for SS sample, three times higher initial capacity from that of SG one, (amounting to 74 mAh g−1 at 5 mV s−1). However, capacity fade on rising scan rate is much more expressed for SS sample than for SG one. We suggest that a different degree of material utilization due to the incomplete coverage of olivine particles by carbon explains this difference. The technique of separation of diffusion and capacitance currents was applied in a kinetic analysis, but it was shown to be inappropriate. We suggest the inapplicability of classic CV theory to the intercalation system accompanied by phase transition. Instead, a model of ohmic resistance determination of process kinetics was considered. LFPC-SS sample delivers three times larger capacity in LiNO3, amounting to 74 mAh g−1 at 1 mV s−1.",
publisher = "Elsevier",
journal = "Journal of Alloys and Compounds",
title = "The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution",
pages = "475-485",
volume = "776",
doi = "10.1016/j.jallcom.2018.10.246",
url = "https://hdl.handle.net/21.15107/rcub_dais_4568"
}

Georgijević, R., Vujković, M., Gutić, S., Aliefendić, M., Jugović, D., Mitrić, M., Đokić, V.,& Mentus, S.. (2019). The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. in Journal of Alloys and Compounds
Elsevier., 776, 475-485.
https://doi.org/10.1016/j.jallcom.2018.10.246
https://hdl.handle.net/21.15107/rcub_dais_4568

Georgijević R, Vujković M, Gutić S, Aliefendić M, Jugović D, Mitrić M, Đokić V, Mentus S. The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. in Journal of Alloys and Compounds. 2019;776:475-485.
doi:10.1016/j.jallcom.2018.10.246
https://hdl.handle.net/21.15107/rcub_dais_4568 .

Georgijević, Radovan, Vujković, Milica, Gutić, Sanjin, Aliefendić, Meho, Jugović, Dragana, Mitrić, Miodrag, Đokić, Veljko, Mentus, Slavko, "The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution" in Journal of Alloys and Compounds, 776 (2019):475-485,
https://doi.org/10.1016/j.jallcom.2018.10.246 .,
https://hdl.handle.net/21.15107/rcub_dais_4568 .

TY  - JOUR
AU  - Georgijević, Radovan
AU  - Vujković, Milica
AU  - Gutić, Sanjin
AU  - Aliefendić, Meho
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
AU  - Đokić, Veljko
AU  - Mentus, Slavko
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0925838818339185
UR  - https://dais.sanu.ac.rs/123456789/4569
AB  - To contribute to the knowledge on the influence of synthesis procedure on the intercalation kinetics of lithium ions into phospho-olivines, LiFePO4/C composite samples (LFPC) were synthesized in two ways, the first one in a sol-gel procedure (SG), and the other in a solid-state reaction (SS). The X-ray diffractograms (XRD) of both samples overlapped with that of pure LiFePO4, taken from the crystallographic database. Scanning electron microscopy pictures indicated the high degree of interparticle sintering, which caused a considerable agglomerate growth. The results of potentiodynamic measurements in aqueous LiNO3 solution revealed that for SS sample, three times higher initial capacity from that of SG one, (amounting to 74 mAh g−1 at 5 mV s−1). However, capacity fade on rising scan rate is much more expressed for SS sample than for SG one. We suggest that a different degree of material utilization due to the incomplete coverage of olivine particles by carbon explains this difference. The technique of separation of diffusion and capacitance currents was applied in a kinetic analysis, but it was shown to be inappropriate. We suggest the inapplicability of classic CV theory to the intercalation system accompanied by phase transition. Instead, a model of ohmic resistance determination of process kinetics was considered. LFPC-SS sample delivers three times larger capacity in LiNO3, amounting to 74 mAh g−1 at 1 mV s−1.
PB  - Elsevier
T2  - Journal of Alloys and Compounds
T1  - The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution
SP  - 475
EP  - 485
VL  - 776
DO  - 10.1016/j.jallcom.2018.10.246
UR  - https://hdl.handle.net/21.15107/rcub_dais_4569
ER  - 

@article{
author = "Georgijević, Radovan and Vujković, Milica and Gutić, Sanjin and Aliefendić, Meho and Jugović, Dragana and Mitrić, Miodrag and Đokić, Veljko and Mentus, Slavko",
year = "2019",
abstract = "To contribute to the knowledge on the influence of synthesis procedure on the intercalation kinetics of lithium ions into phospho-olivines, LiFePO4/C composite samples (LFPC) were synthesized in two ways, the first one in a sol-gel procedure (SG), and the other in a solid-state reaction (SS). The X-ray diffractograms (XRD) of both samples overlapped with that of pure LiFePO4, taken from the crystallographic database. Scanning electron microscopy pictures indicated the high degree of interparticle sintering, which caused a considerable agglomerate growth. The results of potentiodynamic measurements in aqueous LiNO3 solution revealed that for SS sample, three times higher initial capacity from that of SG one, (amounting to 74 mAh g−1 at 5 mV s−1). However, capacity fade on rising scan rate is much more expressed for SS sample than for SG one. We suggest that a different degree of material utilization due to the incomplete coverage of olivine particles by carbon explains this difference. The technique of separation of diffusion and capacitance currents was applied in a kinetic analysis, but it was shown to be inappropriate. We suggest the inapplicability of classic CV theory to the intercalation system accompanied by phase transition. Instead, a model of ohmic resistance determination of process kinetics was considered. LFPC-SS sample delivers three times larger capacity in LiNO3, amounting to 74 mAh g−1 at 1 mV s−1.",
publisher = "Elsevier",
journal = "Journal of Alloys and Compounds",
title = "The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution",
pages = "475-485",
volume = "776",
doi = "10.1016/j.jallcom.2018.10.246",
url = "https://hdl.handle.net/21.15107/rcub_dais_4569"
}

Georgijević, R., Vujković, M., Gutić, S., Aliefendić, M., Jugović, D., Mitrić, M., Đokić, V.,& Mentus, S.. (2019). The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. in Journal of Alloys and Compounds
Elsevier., 776, 475-485.
https://doi.org/10.1016/j.jallcom.2018.10.246
https://hdl.handle.net/21.15107/rcub_dais_4569

Georgijević R, Vujković M, Gutić S, Aliefendić M, Jugović D, Mitrić M, Đokić V, Mentus S. The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. in Journal of Alloys and Compounds. 2019;776:475-485.
doi:10.1016/j.jallcom.2018.10.246
https://hdl.handle.net/21.15107/rcub_dais_4569 .

Georgijević, Radovan, Vujković, Milica, Gutić, Sanjin, Aliefendić, Meho, Jugović, Dragana, Mitrić, Miodrag, Đokić, Veljko, Mentus, Slavko, "The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution" in Journal of Alloys and Compounds, 776 (2019):475-485,
https://doi.org/10.1016/j.jallcom.2018.10.246 .,
https://hdl.handle.net/21.15107/rcub_dais_4569 .

TY  - DATA
AU  - Georgijević, Radovan
AU  - Vujković, Milica
AU  - Gutić, Sanjin
AU  - Aliefendić, Meho
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
AU  - Đokić, Veljko
AU  - Mentus, Slavko
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0925838818339185
UR  - https://dais.sanu.ac.rs/123456789/5975
AB  - CVs of LFPC prepared by sol-gel (a) and solid-state (b) procedure, measured in LiNO3 aqueous solution at a common scan rate of 20 mV s-1 during 10 successive cycles
T2  - Journal of Alloys and Compounds
T1  - Supporting material for the article: Georgijević, R., Vujković, M., Gutić, S., Aliefendić, M., Jugović, D., Mitrić, M., Đokić, V., Mentus, S., 2019. The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. Journal of Alloys and Compounds 776, 475–485. https://doi.org/10.1016/j.jallcom.2018.10.246
UR  - https://hdl.handle.net/21.15107/rcub_dais_5975
ER  - 

@misc{
author = "Georgijević, Radovan and Vujković, Milica and Gutić, Sanjin and Aliefendić, Meho and Jugović, Dragana and Mitrić, Miodrag and Đokić, Veljko and Mentus, Slavko",
year = "2019",
abstract = "CVs of LFPC prepared by sol-gel (a) and solid-state (b) procedure, measured in LiNO3 aqueous solution at a common scan rate of 20 mV s-1 during 10 successive cycles",
journal = "Journal of Alloys and Compounds",
title = "Supporting material for the article: Georgijević, R., Vujković, M., Gutić, S., Aliefendić, M., Jugović, D., Mitrić, M., Đokić, V., Mentus, S., 2019. The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. Journal of Alloys and Compounds 776, 475–485. https://doi.org/10.1016/j.jallcom.2018.10.246",
url = "https://hdl.handle.net/21.15107/rcub_dais_5975"
}

Georgijević, R., Vujković, M., Gutić, S., Aliefendić, M., Jugović, D., Mitrić, M., Đokić, V.,& Mentus, S.. (2019). Supporting material for the article: Georgijević, R., Vujković, M., Gutić, S., Aliefendić, M., Jugović, D., Mitrić, M., Đokić, V., Mentus, S., 2019. The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. Journal of Alloys and Compounds 776, 475–485. https://doi.org/10.1016/j.jallcom.2018.10.246. in Journal of Alloys and Compounds.
https://hdl.handle.net/21.15107/rcub_dais_5975

Georgijević R, Vujković M, Gutić S, Aliefendić M, Jugović D, Mitrić M, Đokić V, Mentus S. Supporting material for the article: Georgijević, R., Vujković, M., Gutić, S., Aliefendić, M., Jugović, D., Mitrić, M., Đokić, V., Mentus, S., 2019. The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. Journal of Alloys and Compounds 776, 475–485. https://doi.org/10.1016/j.jallcom.2018.10.246. in Journal of Alloys and Compounds. 2019;.
https://hdl.handle.net/21.15107/rcub_dais_5975 .

Georgijević, Radovan, Vujković, Milica, Gutić, Sanjin, Aliefendić, Meho, Jugović, Dragana, Mitrić, Miodrag, Đokić, Veljko, Mentus, Slavko, "Supporting material for the article: Georgijević, R., Vujković, M., Gutić, S., Aliefendić, M., Jugović, D., Mitrić, M., Đokić, V., Mentus, S., 2019. The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. Journal of Alloys and Compounds 776, 475–485. https://doi.org/10.1016/j.jallcom.2018.10.246" in Journal of Alloys and Compounds (2019),
https://hdl.handle.net/21.15107/rcub_dais_5975 .