TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Corlett, Cole
AU  - Fahrenholtz, William G.
AU  - Rosenschon, Martin
AU  - Füglein, Ekkehard
AU  - Dojčilović, Radovan
AU  - Tošić, Dragana
AU  - Petrović, Jovana
AU  - Đorđević, Antonije
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/16516
AB  - Ceramic/polymer composites can be chemically stable, mechanically strong, and flexible, which make them candidates for electric devices, such as pressure or temperature sensors, energy storage or harvesting devices, actuators, and so forth. Depending on the application, various electrical properties are of importance. Polymers usually have low dielectric permittivity, but increased dielectric permittivity can be achieved by the addition of the ceramic fillers with high dielectric constant. With the aim to enhance dielectric properties of the composite without loss of flexibility, 5 wt% of BaTiO3-Fe2O3 powder was added into a polyvinylidene fluoride matrix. The powder was prepared by different synthesis conditions to produce core/shell structures. The effect of the phase composition and morphology of the BaTiO3-Fe2O3 core/shell filler on the structure and lattice dynamics of the polymer composites was investigated. Based on the results of the thermal analysis, various parameters of ceramic/polymer composites were determined. Differences in the phase composition and morphology of the filler have an influence on the formation of various polyvinylidene fluoride allomorphs and the degree of crystallinity. Furthermore, the dielectric performances of pure polyvinylidene fluoride and the polymer/ceramic composites were measured.
PB  - Wiley
T2  - Journal of Applied Polymer Science
T1  - Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite
SP  - e55040
VL  - 141
IS  - 10
DO  - 10.1002/app.55040
UR  - https://hdl.handle.net/21.15107/rcub_dais_16516
ER  - 

@article{
author = "Filipović, Suzana and Obradović, Nina and Corlett, Cole and Fahrenholtz, William G. and Rosenschon, Martin and Füglein, Ekkehard and Dojčilović, Radovan and Tošić, Dragana and Petrović, Jovana and Đorđević, Antonije and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2024",
abstract = "Ceramic/polymer composites can be chemically stable, mechanically strong, and flexible, which make them candidates for electric devices, such as pressure or temperature sensors, energy storage or harvesting devices, actuators, and so forth. Depending on the application, various electrical properties are of importance. Polymers usually have low dielectric permittivity, but increased dielectric permittivity can be achieved by the addition of the ceramic fillers with high dielectric constant. With the aim to enhance dielectric properties of the composite without loss of flexibility, 5 wt% of BaTiO3-Fe2O3 powder was added into a polyvinylidene fluoride matrix. The powder was prepared by different synthesis conditions to produce core/shell structures. The effect of the phase composition and morphology of the BaTiO3-Fe2O3 core/shell filler on the structure and lattice dynamics of the polymer composites was investigated. Based on the results of the thermal analysis, various parameters of ceramic/polymer composites were determined. Differences in the phase composition and morphology of the filler have an influence on the formation of various polyvinylidene fluoride allomorphs and the degree of crystallinity. Furthermore, the dielectric performances of pure polyvinylidene fluoride and the polymer/ceramic composites were measured.",
publisher = "Wiley",
journal = "Journal of Applied Polymer Science",
title = "Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite",
pages = "e55040",
volume = "141",
number = "10",
doi = "10.1002/app.55040",
url = "https://hdl.handle.net/21.15107/rcub_dais_16516"
}

Filipović, S., Obradović, N., Corlett, C., Fahrenholtz, W. G., Rosenschon, M., Füglein, E., Dojčilović, R., Tošić, D., Petrović, J., Đorđević, A., Vlahović, B.,& Pavlović, V. B.. (2024). Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite. in Journal of Applied Polymer Science
Wiley., 141(10), e55040.
https://doi.org/10.1002/app.55040
https://hdl.handle.net/21.15107/rcub_dais_16516

Filipović S, Obradović N, Corlett C, Fahrenholtz WG, Rosenschon M, Füglein E, Dojčilović R, Tošić D, Petrović J, Đorđević A, Vlahović B, Pavlović VB. Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite. in Journal of Applied Polymer Science. 2024;141(10):e55040.
doi:10.1002/app.55040
https://hdl.handle.net/21.15107/rcub_dais_16516 .

Filipović, Suzana, Obradović, Nina, Corlett, Cole, Fahrenholtz, William G., Rosenschon, Martin, Füglein, Ekkehard, Dojčilović, Radovan, Tošić, Dragana, Petrović, Jovana, Đorđević, Antonije, Vlahović, Branislav, Pavlović, Vladimir B., "Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite" in Journal of Applied Polymer Science, 141, no. 10 (2024):e55040,
https://doi.org/10.1002/app.55040 .,
https://hdl.handle.net/21.15107/rcub_dais_16516 .

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Corlett, Cole
AU  - Fahrenholtz, William G.
AU  - Rosenschon, Martin
AU  - Füglein, Ekkehard
AU  - Dojčilović, Radovan
AU  - Tošić, Dragana
AU  - Petrović, Jovana
AU  - Đorđević, Antonije
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/16243
AB  - Ceramic/polymer composites can be chemically stable, mechanically strong, and flexible, which make them candidates for electric devices, such as pressure or temperature sensors, energy storage or harvesting devices, actuators, and so forth. Depending on the application, various electrical properties are of importance. Polymers usually have low dielectric permittivity, but increased dielectric permittivity can be achieved by the addition of the ceramic fillers with high dielectric constant. With the aim to enhance dielectric properties of the composite without loss of flexibility, 5 wt% of BaTiO3-Fe2O3 powder was added into a polyvinylidene fluoride matrix. The powder was prepared by different synthesis conditions to produce core/shell structures. The effect of the phase composition and morphology of the BaTiO3-Fe2O3 core/shell filler on the structure and lattice dynamics of the polymer composites was investigated. Based on the results of the thermal analysis, various parameters of ceramic/polymer composites were determined. Differences in the phase composition and morphology of the filler have an influence on the formation of various polyvinylidene fluoride allomorphs and the degree of crystallinity. Furthermore, the dielectric performances of pure polyvinylidene fluoride and the polymer/ceramic composites were measured.
PB  - Wiley
T2  - Journal of Applied Polymer Science
T1  - Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite
SP  - e55040
VL  - 141
IS  - 10
DO  - 10.1002/app.55040
UR  - https://hdl.handle.net/21.15107/rcub_dais_16516
ER  - 

@article{
author = "Filipović, Suzana and Obradović, Nina and Corlett, Cole and Fahrenholtz, William G. and Rosenschon, Martin and Füglein, Ekkehard and Dojčilović, Radovan and Tošić, Dragana and Petrović, Jovana and Đorđević, Antonije and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2024",
abstract = "Ceramic/polymer composites can be chemically stable, mechanically strong, and flexible, which make them candidates for electric devices, such as pressure or temperature sensors, energy storage or harvesting devices, actuators, and so forth. Depending on the application, various electrical properties are of importance. Polymers usually have low dielectric permittivity, but increased dielectric permittivity can be achieved by the addition of the ceramic fillers with high dielectric constant. With the aim to enhance dielectric properties of the composite without loss of flexibility, 5 wt% of BaTiO3-Fe2O3 powder was added into a polyvinylidene fluoride matrix. The powder was prepared by different synthesis conditions to produce core/shell structures. The effect of the phase composition and morphology of the BaTiO3-Fe2O3 core/shell filler on the structure and lattice dynamics of the polymer composites was investigated. Based on the results of the thermal analysis, various parameters of ceramic/polymer composites were determined. Differences in the phase composition and morphology of the filler have an influence on the formation of various polyvinylidene fluoride allomorphs and the degree of crystallinity. Furthermore, the dielectric performances of pure polyvinylidene fluoride and the polymer/ceramic composites were measured.",
publisher = "Wiley",
journal = "Journal of Applied Polymer Science",
title = "Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite",
pages = "e55040",
volume = "141",
number = "10",
doi = "10.1002/app.55040",
url = "https://hdl.handle.net/21.15107/rcub_dais_16516"
}

Filipović, S., Obradović, N., Corlett, C., Fahrenholtz, W. G., Rosenschon, M., Füglein, E., Dojčilović, R., Tošić, D., Petrović, J., Đorđević, A., Vlahović, B.,& Pavlović, V. B.. (2024). Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite. in Journal of Applied Polymer Science
Wiley., 141(10), e55040.
https://doi.org/10.1002/app.55040
https://hdl.handle.net/21.15107/rcub_dais_16516

Filipović S, Obradović N, Corlett C, Fahrenholtz WG, Rosenschon M, Füglein E, Dojčilović R, Tošić D, Petrović J, Đorđević A, Vlahović B, Pavlović VB. Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite. in Journal of Applied Polymer Science. 2024;141(10):e55040.
doi:10.1002/app.55040
https://hdl.handle.net/21.15107/rcub_dais_16516 .

Filipović, Suzana, Obradović, Nina, Corlett, Cole, Fahrenholtz, William G., Rosenschon, Martin, Füglein, Ekkehard, Dojčilović, Radovan, Tošić, Dragana, Petrović, Jovana, Đorđević, Antonije, Vlahović, Branislav, Pavlović, Vladimir B., "Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite" in Journal of Applied Polymer Science, 141, no. 10 (2024):e55040,
https://doi.org/10.1002/app.55040 .,
https://hdl.handle.net/21.15107/rcub_dais_16516 .

TY  - JOUR
AU  - Janićijević, Aleksandra
AU  - Pavlović, Vera P.
AU  - Kovačević, Danijela
AU  - Đorđević, Nenad
AU  - Marinković, Aleksandar
AU  - Vlahović, Branislav
AU  - Karoui, Abdennaceur
AU  - Pavlović, Vladimir B.
AU  - Filipović, Suzana
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/16160
AB  - The hybrid multifunctional magnetic organic/inorganic composite materials, with addition of optimal filler type and quantities are attractive due to wide range of potential application, from various pressure sensors, through smart packaging, to tissue engineering and medicine. The structural, morphological and magnetic properties of polyvinylidene fluoride/nanocellulose/magnetite@BaTiO3 hybrid films were investigated. The presented study revealed significant impact of nanocellulose (NC) content on formation of the polymorphs of PVDF, responsible for ferro-, piezo- and pyroelectric properties. The structural characterization, XRD and Raman measurements confirmed enhancement of the β and γ phases when the loading of NC higher then 4 wt% in multi-component hybrid films. The saturation magnetization value gradually raises with increasing amount of NC and reaches its maximum value of 41.2 emu/g at content of 4 wt% NC. Further, addition of NC decreases saturation magnetization value regardless of constant amount of magnetite, indicating optimal content of NC substrate for co-precipitation of Fe3O4 onto NC matrix.
PB  - Springer
T2  - Journal of Inorganic and Organometallic Polymers and Materials
T1  - Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material
DO  - 10.1007/s10904-023-02953-w
UR  - https://hdl.handle.net/21.15107/rcub_dais_16160
ER  - 

@article{
author = "Janićijević, Aleksandra and Pavlović, Vera P. and Kovačević, Danijela and Đorđević, Nenad and Marinković, Aleksandar and Vlahović, Branislav and Karoui, Abdennaceur and Pavlović, Vladimir B. and Filipović, Suzana",
year = "2023",
abstract = "The hybrid multifunctional magnetic organic/inorganic composite materials, with addition of optimal filler type and quantities are attractive due to wide range of potential application, from various pressure sensors, through smart packaging, to tissue engineering and medicine. The structural, morphological and magnetic properties of polyvinylidene fluoride/nanocellulose/magnetite@BaTiO3 hybrid films were investigated. The presented study revealed significant impact of nanocellulose (NC) content on formation of the polymorphs of PVDF, responsible for ferro-, piezo- and pyroelectric properties. The structural characterization, XRD and Raman measurements confirmed enhancement of the β and γ phases when the loading of NC higher then 4 wt% in multi-component hybrid films. The saturation magnetization value gradually raises with increasing amount of NC and reaches its maximum value of 41.2 emu/g at content of 4 wt% NC. Further, addition of NC decreases saturation magnetization value regardless of constant amount of magnetite, indicating optimal content of NC substrate for co-precipitation of Fe3O4 onto NC matrix.",
publisher = "Springer",
journal = "Journal of Inorganic and Organometallic Polymers and Materials",
title = "Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material",
doi = "10.1007/s10904-023-02953-w",
url = "https://hdl.handle.net/21.15107/rcub_dais_16160"
}

Janićijević, A., Pavlović, V. P., Kovačević, D., Đorđević, N., Marinković, A., Vlahović, B., Karoui, A., Pavlović, V. B.,& Filipović, S.. (2023). Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material. in Journal of Inorganic and Organometallic Polymers and Materials
Springer..
https://doi.org/10.1007/s10904-023-02953-w
https://hdl.handle.net/21.15107/rcub_dais_16160

Janićijević A, Pavlović VP, Kovačević D, Đorđević N, Marinković A, Vlahović B, Karoui A, Pavlović VB, Filipović S. Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material. in Journal of Inorganic and Organometallic Polymers and Materials. 2023;.
doi:10.1007/s10904-023-02953-w
https://hdl.handle.net/21.15107/rcub_dais_16160 .

Janićijević, Aleksandra, Pavlović, Vera P., Kovačević, Danijela, Đorđević, Nenad, Marinković, Aleksandar, Vlahović, Branislav, Karoui, Abdennaceur, Pavlović, Vladimir B., Filipović, Suzana, "Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material" in Journal of Inorganic and Organometallic Polymers and Materials (2023),
https://doi.org/10.1007/s10904-023-02953-w .,
https://hdl.handle.net/21.15107/rcub_dais_16160 .

TY  - JOUR
AU  - Janićijević, Aleksandra
AU  - Pavlović, Vera P.
AU  - Kovačević, Danijela
AU  - Đorđević, Nenad
AU  - Marinković, Aleksandar
AU  - Vlahović, Branislav
AU  - Karoui, Abdennaceur
AU  - Pavlović, Vladimir B.
AU  - Filipović, Suzana
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/16160
UR  - https://dais.sanu.ac.rs/123456789/16161
AB  - The hybrid multifunctional magnetic organic/inorganic composite materials, with addition of optimal filler type and quantities are attractive due to wide range of potential application, from various pressure sensors, through smart packaging, to tissue engineering and medicine. The structural, morphological and magnetic properties of polyvinylidene fluoride/nanocellulose/magnetite@BaTiO3 hybrid films were investigated. The presented study revealed significant impact of nanocellulose (NC) content on formation of the polymorphs of PVDF, responsible for ferro-, piezo- and pyroelectric properties. The structural characterization, XRD and Raman measurements confirmed enhancement of the β and γ phases when the loading of NC higher then 4 wt% in multi-component hybrid films. The saturation magnetization value gradually raises with increasing amount of NC and reaches its maximum value of 41.2 emu/g at content of 4 wt% NC. Further, addition of NC decreases saturation magnetization value regardless of constant amount of magnetite, indicating optimal content of NC substrate for co-precipitation of Fe3O4 onto NC matrix.
PB  - Springer
T2  - Journal of Inorganic and Organometallic Polymers and Materials
T1  - Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material
DO  - 10.1007/s10904-023-02953-w
UR  - https://hdl.handle.net/21.15107/rcub_dais_16161
ER  - 

@article{
author = "Janićijević, Aleksandra and Pavlović, Vera P. and Kovačević, Danijela and Đorđević, Nenad and Marinković, Aleksandar and Vlahović, Branislav and Karoui, Abdennaceur and Pavlović, Vladimir B. and Filipović, Suzana",
year = "2023",
abstract = "The hybrid multifunctional magnetic organic/inorganic composite materials, with addition of optimal filler type and quantities are attractive due to wide range of potential application, from various pressure sensors, through smart packaging, to tissue engineering and medicine. The structural, morphological and magnetic properties of polyvinylidene fluoride/nanocellulose/magnetite@BaTiO3 hybrid films were investigated. The presented study revealed significant impact of nanocellulose (NC) content on formation of the polymorphs of PVDF, responsible for ferro-, piezo- and pyroelectric properties. The structural characterization, XRD and Raman measurements confirmed enhancement of the β and γ phases when the loading of NC higher then 4 wt% in multi-component hybrid films. The saturation magnetization value gradually raises with increasing amount of NC and reaches its maximum value of 41.2 emu/g at content of 4 wt% NC. Further, addition of NC decreases saturation magnetization value regardless of constant amount of magnetite, indicating optimal content of NC substrate for co-precipitation of Fe3O4 onto NC matrix.",
publisher = "Springer",
journal = "Journal of Inorganic and Organometallic Polymers and Materials",
title = "Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material",
doi = "10.1007/s10904-023-02953-w",
url = "https://hdl.handle.net/21.15107/rcub_dais_16161"
}

Janićijević, A., Pavlović, V. P., Kovačević, D., Đorđević, N., Marinković, A., Vlahović, B., Karoui, A., Pavlović, V. B.,& Filipović, S.. (2023). Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material. in Journal of Inorganic and Organometallic Polymers and Materials
Springer..
https://doi.org/10.1007/s10904-023-02953-w
https://hdl.handle.net/21.15107/rcub_dais_16161

Janićijević A, Pavlović VP, Kovačević D, Đorđević N, Marinković A, Vlahović B, Karoui A, Pavlović VB, Filipović S. Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material. in Journal of Inorganic and Organometallic Polymers and Materials. 2023;.
doi:10.1007/s10904-023-02953-w
https://hdl.handle.net/21.15107/rcub_dais_16161 .

Janićijević, Aleksandra, Pavlović, Vera P., Kovačević, Danijela, Đorđević, Nenad, Marinković, Aleksandar, Vlahović, Branislav, Karoui, Abdennaceur, Pavlović, Vladimir B., Filipović, Suzana, "Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material" in Journal of Inorganic and Organometallic Polymers and Materials (2023),
https://doi.org/10.1007/s10904-023-02953-w .,
https://hdl.handle.net/21.15107/rcub_dais_16161 .

TY  - JOUR
AU  - Janićijević, Aleksandra
AU  - Filipović, Suzana
AU  - Sknepnek, Aleksandra
AU  - Vlahović, Branislav
AU  - Đorđević, Nenad
AU  - Kovacević, Danijela
AU  - Mirković, Miljana
AU  - Petronijević, Ivan
AU  - Živković, Predrag
AU  - Rogan, Jelena
AU  - Pavlović, Vladimir B.
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/15363
AB  - In the search for environmentally friendly materials with a wide range of properties, polymer composites have emerged as a promising alternative due to their multifunctional properties. This study focuses on the synthesis of composite materials consisting of four components: bacterial nanocellulose (BNC) modified with magnetic Fe3O4, and a mixture of BaTiO3 (BT) and polyvinylidene fluoride (PVDF). The BT powder was mechanically activated prior to mixing with PVDF. The influence of BT mechanical activation and BNC with magnetic particles on the PVDF matrix was investigated. The obtained composite films’ structural characteristics, morphology, and dielectric properties are presented. This research provides insights into the relationship between mechanical activation of the filler and structural and dielectric properties in the PVDF/BT/BNC/Fe3O4 system, creating the way for the development of materials with a wide range of diverse properties that support the concept of green technologies.
PB  - Basel : MDPI
T2  - Polymers
T1  - Dielectric and Structural Properties of the Hybrid Material Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Composite
SP  - 4080
VL  - 15
IS  - 20
DO  - 10.3390/polym15204080
UR  - https://hdl.handle.net/21.15107/rcub_dais_15363
ER  - 

@article{
author = "Janićijević, Aleksandra and Filipović, Suzana and Sknepnek, Aleksandra and Vlahović, Branislav and Đorđević, Nenad and Kovacević, Danijela and Mirković, Miljana and Petronijević, Ivan and Živković, Predrag and Rogan, Jelena and Pavlović, Vladimir B.",
year = "2023",
abstract = "In the search for environmentally friendly materials with a wide range of properties, polymer composites have emerged as a promising alternative due to their multifunctional properties. This study focuses on the synthesis of composite materials consisting of four components: bacterial nanocellulose (BNC) modified with magnetic Fe3O4, and a mixture of BaTiO3 (BT) and polyvinylidene fluoride (PVDF). The BT powder was mechanically activated prior to mixing with PVDF. The influence of BT mechanical activation and BNC with magnetic particles on the PVDF matrix was investigated. The obtained composite films’ structural characteristics, morphology, and dielectric properties are presented. This research provides insights into the relationship between mechanical activation of the filler and structural and dielectric properties in the PVDF/BT/BNC/Fe3O4 system, creating the way for the development of materials with a wide range of diverse properties that support the concept of green technologies.",
publisher = "Basel : MDPI",
journal = "Polymers",
title = "Dielectric and Structural Properties of the Hybrid Material Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Composite",
pages = "4080",
volume = "15",
number = "20",
doi = "10.3390/polym15204080",
url = "https://hdl.handle.net/21.15107/rcub_dais_15363"
}

Janićijević, A., Filipović, S., Sknepnek, A., Vlahović, B., Đorđević, N., Kovacević, D., Mirković, M., Petronijević, I., Živković, P., Rogan, J.,& Pavlović, V. B.. (2023). Dielectric and Structural Properties of the Hybrid Material Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Composite. in Polymers
Basel : MDPI., 15(20), 4080.
https://doi.org/10.3390/polym15204080
https://hdl.handle.net/21.15107/rcub_dais_15363

Janićijević A, Filipović S, Sknepnek A, Vlahović B, Đorđević N, Kovacević D, Mirković M, Petronijević I, Živković P, Rogan J, Pavlović VB. Dielectric and Structural Properties of the Hybrid Material Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Composite. in Polymers. 2023;15(20):4080.
doi:10.3390/polym15204080
https://hdl.handle.net/21.15107/rcub_dais_15363 .

Janićijević, Aleksandra, Filipović, Suzana, Sknepnek, Aleksandra, Vlahović, Branislav, Đorđević, Nenad, Kovacević, Danijela, Mirković, Miljana, Petronijević, Ivan, Živković, Predrag, Rogan, Jelena, Pavlović, Vladimir B., "Dielectric and Structural Properties of the Hybrid Material Polyvinylidene Fluoride-Bacterial Nanocellulose-Based Composite" in Polymers, 15, no. 20 (2023):4080,
https://doi.org/10.3390/polym15204080 .,
https://hdl.handle.net/21.15107/rcub_dais_15363 .

TY  - CONF
AU  - Peleš Tadić, Adriana
AU  - Vuković, George
AU  - Kojović, Aleksandar
AU  - Stojanović, Dušica
AU  - Vlahović, Branislav
AU  - Milosavljević, Nataša
AU  - Obradović, Nina
AU  - Pavlović, Vladimir B.
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/14969
AB  - Barium titanate (BaTiO3) and polyvinylidene fluoride (PVDF) based multifunctional materials are attracting a great scientific interest due to their excellent piezoelectric, pyroelectric and ferroelectric properties. These materials undergo controlled transformations through physical interactions and respond to environmental stimuli, such as temperature, pressure, electric and magnetic fields. Their properties strongly depend on synthesis procedures and obtained microstructures. This include intergranular contact surfaces of BaTiO3 based materials, as well as, porous structure and cross-linking patterns of PVDF prepared by electrospinning. It has been found that these microstructures can have fractal structure and that the fractal analysis can be used as a powerful tool for describing structural and functional properties of these materials. Having this in mind, in this research we have used different fractal methods for the reconstructions of various BaTiO3 and PVDF microstructure morphologies. Fractal analysis has been performed by using scanning electron microscope micrographs and computational modeling tools. Fractal dimension of irregular morphologies which exhibit fractal regularity were determined by using box-counting method. This method enables the analysis of self-similar microstructure morphologies by quantifying the rate at which an object's geometrical details develop at increasingly fine scales. Theory of Iterated Function Systems and Voronoi tessellation, have been used for modeling BaTiO3 random microstructures and PVDF porous structures. A python algorithm was created to determine the distribution of pore areas in SEM micrographs. Algorithm’s distribution of calculated pore surface areas was compared with measured pore surface areas and fractal reconstructions of different morphologies and their connection with functional properties were analyzed.
PB  - Belgrade : University of Belgrade - Faculty of Mechanical Engineering
C3  - Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2023, 04 – 07 July 2023, Zlatibor, Serbia
T1  - Fractal analysis and microstructure development of BaTiO3 and PVDF based multifunctional materials
SP  - 46
UR  - https://hdl.handle.net/21.15107/rcub_dais_14969
ER  - 

@conference{
author = "Peleš Tadić, Adriana and Vuković, George and Kojović, Aleksandar and Stojanović, Dušica and Vlahović, Branislav and Milosavljević, Nataša and Obradović, Nina and Pavlović, Vladimir B.",
year = "2023",
abstract = "Barium titanate (BaTiO3) and polyvinylidene fluoride (PVDF) based multifunctional materials are attracting a great scientific interest due to their excellent piezoelectric, pyroelectric and ferroelectric properties. These materials undergo controlled transformations through physical interactions and respond to environmental stimuli, such as temperature, pressure, electric and magnetic fields. Their properties strongly depend on synthesis procedures and obtained microstructures. This include intergranular contact surfaces of BaTiO3 based materials, as well as, porous structure and cross-linking patterns of PVDF prepared by electrospinning. It has been found that these microstructures can have fractal structure and that the fractal analysis can be used as a powerful tool for describing structural and functional properties of these materials. Having this in mind, in this research we have used different fractal methods for the reconstructions of various BaTiO3 and PVDF microstructure morphologies. Fractal analysis has been performed by using scanning electron microscope micrographs and computational modeling tools. Fractal dimension of irregular morphologies which exhibit fractal regularity were determined by using box-counting method. This method enables the analysis of self-similar microstructure morphologies by quantifying the rate at which an object's geometrical details develop at increasingly fine scales. Theory of Iterated Function Systems and Voronoi tessellation, have been used for modeling BaTiO3 random microstructures and PVDF porous structures. A python algorithm was created to determine the distribution of pore areas in SEM micrographs. Algorithm’s distribution of calculated pore surface areas was compared with measured pore surface areas and fractal reconstructions of different morphologies and their connection with functional properties were analyzed.",
publisher = "Belgrade : University of Belgrade - Faculty of Mechanical Engineering",
journal = "Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2023, 04 – 07 July 2023, Zlatibor, Serbia",
title = "Fractal analysis and microstructure development of BaTiO3 and PVDF based multifunctional materials",
pages = "46",
url = "https://hdl.handle.net/21.15107/rcub_dais_14969"
}

Peleš Tadić, A., Vuković, G., Kojović, A., Stojanović, D., Vlahović, B., Milosavljević, N., Obradović, N.,& Pavlović, V. B.. (2023). Fractal analysis and microstructure development of BaTiO3 and PVDF based multifunctional materials. in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2023, 04 – 07 July 2023, Zlatibor, Serbia
Belgrade : University of Belgrade - Faculty of Mechanical Engineering., 46.
https://hdl.handle.net/21.15107/rcub_dais_14969

Peleš Tadić A, Vuković G, Kojović A, Stojanović D, Vlahović B, Milosavljević N, Obradović N, Pavlović VB. Fractal analysis and microstructure development of BaTiO3 and PVDF based multifunctional materials. in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2023, 04 – 07 July 2023, Zlatibor, Serbia. 2023;:46.
https://hdl.handle.net/21.15107/rcub_dais_14969 .

Peleš Tadić, Adriana, Vuković, George, Kojović, Aleksandar, Stojanović, Dušica, Vlahović, Branislav, Milosavljević, Nataša, Obradović, Nina, Pavlović, Vladimir B., "Fractal analysis and microstructure development of BaTiO3 and PVDF based multifunctional materials" in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2023, 04 – 07 July 2023, Zlatibor, Serbia (2023):46,
https://hdl.handle.net/21.15107/rcub_dais_14969 .

TY  - JOUR
AU  - Peleš Tadić, Adriana
AU  - Vuković, George
AU  - Kojović, Aleksandar
AU  - Stojanović, Dušica
AU  - Vlahović, Branislav
AU  - Obradović, Nina
AU  - Pavlović, Vladimir
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/16173
AB  - Polyvinylidene fluoride (PVDF) is a novel gel polymer electrolyte alternative which can reduce the risk of irreversible failure in lithium-ion batteries (LIB) [1]. PVDF matrix structures which exhibit inter-crosslinking networks have previously demonstrated favorable thermal and mechanical properties for LIB applications [2]. PVDF based multifunctional material is attracting a great scientific interest due to its excellent piezoelectric, pyroelectric and ferroelectric properties. Such as, its properties strongly depend on synthesis procedures and obtained microstructures. In this research, porous structure and cross-linking patterns of PVDF were prepared by electrospinning method and it has been found that these microstructures can have fractal structure. Fractal analysis can be used as a powerful tool for describing structural and functional properties of these this material. Because of that, in this research we have used different fractal methods for the reconstructions of various PVDF microstructure morphologies. Fractal analysis has been performed by using scanning electron microscope micrographs and computational modeling tools. Theory of Iterated Function Systems and Voronoi tessellation, have been used for modeling PVDF porous structures. A Python algorithm was created to determine the distribution of pore areas in SEM micrographs. Algorithm’s distribution of calculated pore surface areas were compared with measured pore surface areas and fractal reconstructions of different morphologies and their connection with functional properties were analyzed.
PB  - Belgrade : ETRAN
T2  - Science of Sintering
T1  - Fractal analysis and microstructure development PVDF based multifunctional material
DO  - 10.2298/SOS231031061P
UR  - https://hdl.handle.net/21.15107/rcub_dais_16173
ER  - 

@article{
author = "Peleš Tadić, Adriana and Vuković, George and Kojović, Aleksandar and Stojanović, Dušica and Vlahović, Branislav and Obradović, Nina and Pavlović, Vladimir",
year = "2023",
abstract = "Polyvinylidene fluoride (PVDF) is a novel gel polymer electrolyte alternative which can reduce the risk of irreversible failure in lithium-ion batteries (LIB) [1]. PVDF matrix structures which exhibit inter-crosslinking networks have previously demonstrated favorable thermal and mechanical properties for LIB applications [2]. PVDF based multifunctional material is attracting a great scientific interest due to its excellent piezoelectric, pyroelectric and ferroelectric properties. Such as, its properties strongly depend on synthesis procedures and obtained microstructures. In this research, porous structure and cross-linking patterns of PVDF were prepared by electrospinning method and it has been found that these microstructures can have fractal structure. Fractal analysis can be used as a powerful tool for describing structural and functional properties of these this material. Because of that, in this research we have used different fractal methods for the reconstructions of various PVDF microstructure morphologies. Fractal analysis has been performed by using scanning electron microscope micrographs and computational modeling tools. Theory of Iterated Function Systems and Voronoi tessellation, have been used for modeling PVDF porous structures. A Python algorithm was created to determine the distribution of pore areas in SEM micrographs. Algorithm’s distribution of calculated pore surface areas were compared with measured pore surface areas and fractal reconstructions of different morphologies and their connection with functional properties were analyzed.",
publisher = "Belgrade : ETRAN",
journal = "Science of Sintering",
title = "Fractal analysis and microstructure development PVDF based multifunctional material",
doi = "10.2298/SOS231031061P",
url = "https://hdl.handle.net/21.15107/rcub_dais_16173"
}

Peleš Tadić, A., Vuković, G., Kojović, A., Stojanović, D., Vlahović, B., Obradović, N.,& Pavlović, V.. (2023). Fractal analysis and microstructure development PVDF based multifunctional material. in Science of Sintering
Belgrade : ETRAN..
https://doi.org/10.2298/SOS231031061P
https://hdl.handle.net/21.15107/rcub_dais_16173

Peleš Tadić A, Vuković G, Kojović A, Stojanović D, Vlahović B, Obradović N, Pavlović V. Fractal analysis and microstructure development PVDF based multifunctional material. in Science of Sintering. 2023;.
doi:10.2298/SOS231031061P
https://hdl.handle.net/21.15107/rcub_dais_16173 .

Peleš Tadić, Adriana, Vuković, George, Kojović, Aleksandar, Stojanović, Dušica, Vlahović, Branislav, Obradović, Nina, Pavlović, Vladimir, "Fractal analysis and microstructure development PVDF based multifunctional material" in Science of Sintering (2023),
https://doi.org/10.2298/SOS231031061P .,
https://hdl.handle.net/21.15107/rcub_dais_16173 .

TY  - CONF
AU  - Pavlović, Vladimir B.
AU  - Vuković, G.
AU  - Nikolić, M.
AU  - Pavlović, Vera P.
AU  - Perić, M.
AU  - Nenadović, S.
AU  - Ivanović, M.
AU  - Mirković, M.
AU  - Đoković, V.
AU  - Knežević, S.
AU  - Šuljagić, Marija
AU  - Anđelković, Lj.
AU  - Janićijević, Aleksandra
AU  - Kovačević, D.
AU  - Filipović, Suzana
AU  - Vujančević, Jelena
AU  - Vlahović, Branislav
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/15760
AB  - The convergence of nano-, bio-, and information technologies is based on the understanding of complex hierarchical structures and systems, as well as on the material unity at the nanoscale and on technology integration from that scale. A growing interest in these technologies is a result of their potential to provide solutions to numerous societal challenges, such as advanced healthcare, environmental remediation, sustainable development, and adoption of cyber-physical systems based on the Internet of Things and the Internet of Systems. Taking into account that hybrid nanomaterials possess extraordinary physical and chemical properties derived from their size in the nanoscale, the aim of this work is to present the connection between processing parameters and multifunctional properties of nano scale hybrid materials, focusing on the study of ceramic-polymer structures before they can be nano-engineered into functional devices. The unique functionality of these nanostructures has enabled their applications in numerous devices such as: micro and nano-electro-mechanical systems (MEMS/NEMS), sensors, microactuators, surface acoustic wave devices, polymer electrolyte membrane fuel cells, switches, thermistors, resonators and filters, electrooptic devices, etc. In this study special attention has been paid to their applications in the fields of electronics, biotechnology, environmental protection and remediation.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application XI New Frontiers in Multifunctional Material Science and Processing, Serbian Academy of Sciences and Art Serbia, Belgrade,18-20.September 2023
T1  - Hybrid Nanoscale Materials for Convergent Technologies
SP  - 45
EP  - 45
UR  - https://hdl.handle.net/21.15107/rcub_dais_15760
ER  - 

@conference{
author = "Pavlović, Vladimir B. and Vuković, G. and Nikolić, M. and Pavlović, Vera P. and Perić, M. and Nenadović, S. and Ivanović, M. and Mirković, M. and Đoković, V. and Knežević, S. and Šuljagić, Marija and Anđelković, Lj. and Janićijević, Aleksandra and Kovačević, D. and Filipović, Suzana and Vujančević, Jelena and Vlahović, Branislav",
year = "2023",
abstract = "The convergence of nano-, bio-, and information technologies is based on the understanding of complex hierarchical structures and systems, as well as on the material unity at the nanoscale and on technology integration from that scale. A growing interest in these technologies is a result of their potential to provide solutions to numerous societal challenges, such as advanced healthcare, environmental remediation, sustainable development, and adoption of cyber-physical systems based on the Internet of Things and the Internet of Systems. Taking into account that hybrid nanomaterials possess extraordinary physical and chemical properties derived from their size in the nanoscale, the aim of this work is to present the connection between processing parameters and multifunctional properties of nano scale hybrid materials, focusing on the study of ceramic-polymer structures before they can be nano-engineered into functional devices. The unique functionality of these nanostructures has enabled their applications in numerous devices such as: micro and nano-electro-mechanical systems (MEMS/NEMS), sensors, microactuators, surface acoustic wave devices, polymer electrolyte membrane fuel cells, switches, thermistors, resonators and filters, electrooptic devices, etc. In this study special attention has been paid to their applications in the fields of electronics, biotechnology, environmental protection and remediation.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application XI New Frontiers in Multifunctional Material Science and Processing, Serbian Academy of Sciences and Art Serbia, Belgrade,18-20.September 2023",
title = "Hybrid Nanoscale Materials for Convergent Technologies",
pages = "45-45",
url = "https://hdl.handle.net/21.15107/rcub_dais_15760"
}

Pavlović, V. B., Vuković, G., Nikolić, M., Pavlović, V. P., Perić, M., Nenadović, S., Ivanović, M., Mirković, M., Đoković, V., Knežević, S., Šuljagić, M., Anđelković, Lj., Janićijević, A., Kovačević, D., Filipović, S., Vujančević, J.,& Vlahović, B.. (2023). Hybrid Nanoscale Materials for Convergent Technologies. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application XI New Frontiers in Multifunctional Material Science and Processing, Serbian Academy of Sciences and Art Serbia, Belgrade,18-20.September 2023
Belgrade : Serbian Ceramic Society., 45-45.
https://hdl.handle.net/21.15107/rcub_dais_15760

Pavlović VB, Vuković G, Nikolić M, Pavlović VP, Perić M, Nenadović S, Ivanović M, Mirković M, Đoković V, Knežević S, Šuljagić M, Anđelković L, Janićijević A, Kovačević D, Filipović S, Vujančević J, Vlahović B. Hybrid Nanoscale Materials for Convergent Technologies. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application XI New Frontiers in Multifunctional Material Science and Processing, Serbian Academy of Sciences and Art Serbia, Belgrade,18-20.September 2023. 2023;:45-45.
https://hdl.handle.net/21.15107/rcub_dais_15760 .

Pavlović, Vladimir B., Vuković, G., Nikolić, M., Pavlović, Vera P., Perić, M., Nenadović, S., Ivanović, M., Mirković, M., Đoković, V., Knežević, S., Šuljagić, Marija, Anđelković, Lj., Janićijević, Aleksandra, Kovačević, D., Filipović, Suzana, Vujančević, Jelena, Vlahović, Branislav, "Hybrid Nanoscale Materials for Convergent Technologies" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application XI New Frontiers in Multifunctional Material Science and Processing, Serbian Academy of Sciences and Art Serbia, Belgrade,18-20.September 2023 (2023):45-45,
https://hdl.handle.net/21.15107/rcub_dais_15760 .

TY  - JOUR
AU  - Mirković, Miljana
AU  - Filipović, Suzana
AU  - Kalijadis, Ana
AU  - Mašković, Pavle
AU  - Mašković, Jelena
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13153
AB  - Due to the growing number of people infected with the new coronavirus globally, which weakens immunity, there has been an increase in bacterial infections. Hence, knowledge about simple and low-cost synthesis methods of materials with good structural and antimicrobial properties is of great importance. A material obtained through the combination of a nanoscale hydroxyapatite material (with good biocompatibility) and titanium dioxide (with good degradation properties of organic molecules) can absorb and decompose bacteria. In this investigation, three different synthesis routes used to prepare hydroxyapatite/titanium dioxide nanomaterials are examined. The morphology and semiquantitative chemical composition are characterized by scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDX). The obtained materials’ phase and structural characterization are determined using the X-ray powder diffraction method (XRD). The crystallite sizes of the obtained materials are in the range of 8 nm to 15 nm. Based on XRD peak positions, the hexagonal hydroxyapatite phases are formed in all samples along with TiO2 anatase and rutile phases. According to SEM and TEM analyses, the morphology of the prepared samples differs depending on the synthesis route. The EDX analysis confirmed the presence of Ti, Ca, P, and O in the obtained materials. The IR spectroscopy verified the vibration bands characteristic for HAp and titanium. The investigated materials show excellent antimicrobial and photocatalytic properties.
T2  - Antibiotics
T1  - Hydroxyapatite/TiO2 Nanomaterial with Defined Microstructural and Good Antimicrobial Properties
SP  - 592
VL  - 11
IS  - 5
DO  - 10.3390/antibiotics11050592
UR  - https://hdl.handle.net/21.15107/rcub_dais_13153
ER  - 

@article{
author = "Mirković, Miljana and Filipović, Suzana and Kalijadis, Ana and Mašković, Pavle and Mašković, Jelena and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2022",
abstract = "Due to the growing number of people infected with the new coronavirus globally, which weakens immunity, there has been an increase in bacterial infections. Hence, knowledge about simple and low-cost synthesis methods of materials with good structural and antimicrobial properties is of great importance. A material obtained through the combination of a nanoscale hydroxyapatite material (with good biocompatibility) and titanium dioxide (with good degradation properties of organic molecules) can absorb and decompose bacteria. In this investigation, three different synthesis routes used to prepare hydroxyapatite/titanium dioxide nanomaterials are examined. The morphology and semiquantitative chemical composition are characterized by scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDX). The obtained materials’ phase and structural characterization are determined using the X-ray powder diffraction method (XRD). The crystallite sizes of the obtained materials are in the range of 8 nm to 15 nm. Based on XRD peak positions, the hexagonal hydroxyapatite phases are formed in all samples along with TiO2 anatase and rutile phases. According to SEM and TEM analyses, the morphology of the prepared samples differs depending on the synthesis route. The EDX analysis confirmed the presence of Ti, Ca, P, and O in the obtained materials. The IR spectroscopy verified the vibration bands characteristic for HAp and titanium. The investigated materials show excellent antimicrobial and photocatalytic properties.",
journal = "Antibiotics",
title = "Hydroxyapatite/TiO2 Nanomaterial with Defined Microstructural and Good Antimicrobial Properties",
pages = "592",
volume = "11",
number = "5",
doi = "10.3390/antibiotics11050592",
url = "https://hdl.handle.net/21.15107/rcub_dais_13153"
}

Mirković, M., Filipović, S., Kalijadis, A., Mašković, P., Mašković, J., Vlahović, B.,& Pavlović, V. B.. (2022). Hydroxyapatite/TiO2 Nanomaterial with Defined Microstructural and Good Antimicrobial Properties. in Antibiotics, 11(5), 592.
https://doi.org/10.3390/antibiotics11050592
https://hdl.handle.net/21.15107/rcub_dais_13153

Mirković M, Filipović S, Kalijadis A, Mašković P, Mašković J, Vlahović B, Pavlović VB. Hydroxyapatite/TiO2 Nanomaterial with Defined Microstructural and Good Antimicrobial Properties. in Antibiotics. 2022;11(5):592.
doi:10.3390/antibiotics11050592
https://hdl.handle.net/21.15107/rcub_dais_13153 .

Mirković, Miljana, Filipović, Suzana, Kalijadis, Ana, Mašković, Pavle, Mašković, Jelena, Vlahović, Branislav, Pavlović, Vladimir B., "Hydroxyapatite/TiO2 Nanomaterial with Defined Microstructural and Good Antimicrobial Properties" in Antibiotics, 11, no. 5 (2022):592,
https://doi.org/10.3390/antibiotics11050592 .,
https://hdl.handle.net/21.15107/rcub_dais_13153 .

TY  - JOUR
AU  - Janićijević, Aleksandra
AU  - Pavlović, Vera P.
AU  - Kovačević, Danijela
AU  - Perić, Marko
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
AU  - Filipović, Suzana
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13152
AB  - The rise of innovation in the electrical industry is driven by the controlled design of new materials. The hybrid materials based on magnetite/nanocellulose are highly interesting due to their various applications in medicine, ecology, catalysis and electronics. In this study, the structure and morphology of nanocellulose/magnetite hybrid nanomaterials were investigated. The effect of nanocellulose loading on the crystal structure of synthesized composites was investigated by XRD and FTIR methods. The presented study reveals that the interaction between the cellulose and magnetic nanoparticles depends on the nanocellulose content. Further, a transition from cellulose II to cellulose I allomorph is observed. SEM and EDS are employed to determine the variation in morphology with changes in component concentrations. By the calculation of magnetic interactions between adjacent Fe3+ and Fe2+ ions within composites, it is determined that ferromagnetic coupling predominates.
T2  - Polymers
T1  - Structural Characterization of Nanocellulose/Fe3O4 Hybrid Nanomaterials
SP  - 1819
VL  - 14
IS  - 9
DO  - 10.3390/polym14091819
UR  - https://hdl.handle.net/21.15107/rcub_dais_13152
ER  - 

@article{
author = "Janićijević, Aleksandra and Pavlović, Vera P. and Kovačević, Danijela and Perić, Marko and Vlahović, Branislav and Pavlović, Vladimir B. and Filipović, Suzana",
year = "2022",
abstract = "The rise of innovation in the electrical industry is driven by the controlled design of new materials. The hybrid materials based on magnetite/nanocellulose are highly interesting due to their various applications in medicine, ecology, catalysis and electronics. In this study, the structure and morphology of nanocellulose/magnetite hybrid nanomaterials were investigated. The effect of nanocellulose loading on the crystal structure of synthesized composites was investigated by XRD and FTIR methods. The presented study reveals that the interaction between the cellulose and magnetic nanoparticles depends on the nanocellulose content. Further, a transition from cellulose II to cellulose I allomorph is observed. SEM and EDS are employed to determine the variation in morphology with changes in component concentrations. By the calculation of magnetic interactions between adjacent Fe3+ and Fe2+ ions within composites, it is determined that ferromagnetic coupling predominates.",
journal = "Polymers",
title = "Structural Characterization of Nanocellulose/Fe3O4 Hybrid Nanomaterials",
pages = "1819",
volume = "14",
number = "9",
doi = "10.3390/polym14091819",
url = "https://hdl.handle.net/21.15107/rcub_dais_13152"
}

Janićijević, A., Pavlović, V. P., Kovačević, D., Perić, M., Vlahović, B., Pavlović, V. B.,& Filipović, S.. (2022). Structural Characterization of Nanocellulose/Fe3O4 Hybrid Nanomaterials. in Polymers, 14(9), 1819.
https://doi.org/10.3390/polym14091819
https://hdl.handle.net/21.15107/rcub_dais_13152

Janićijević A, Pavlović VP, Kovačević D, Perić M, Vlahović B, Pavlović VB, Filipović S. Structural Characterization of Nanocellulose/Fe3O4 Hybrid Nanomaterials. in Polymers. 2022;14(9):1819.
doi:10.3390/polym14091819
https://hdl.handle.net/21.15107/rcub_dais_13152 .

Janićijević, Aleksandra, Pavlović, Vera P., Kovačević, Danijela, Perić, Marko, Vlahović, Branislav, Pavlović, Vladimir B., Filipović, Suzana, "Structural Characterization of Nanocellulose/Fe3O4 Hybrid Nanomaterials" in Polymers, 14, no. 9 (2022):1819,
https://doi.org/10.3390/polym14091819 .,
https://hdl.handle.net/21.15107/rcub_dais_13152 .

TY  - JOUR
AU  - Živojinović, Jelena
AU  - Kosanović, Darko
AU  - Blagojević, Vladimir A.
AU  - Pavlović, Vera P.
AU  - Tadić, Nenad
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13510
AB  - In this study, microstructure evolution and dielectric properties of SrTiO3 ceramic have been investigated, whereby mechanical activation of SrTiO3 powders was used to modify the functional properties of ceramic materials. Microstructural SEM analysis of SrTiO3 ceramics showed that the increase in mechanical activation time results in less porous samples. Raman spectroscopy indicated changes in the broadening and asymmetry of the TO2 mode with a change in the time of mechanical activation. TO2 mode showed a Fano asymmetry due to its interaction with polarization fluctuations in polar micro-regions, which are a consequence of the presence of oxygen vacancies caused by activation. The maximum value of dielectric permittivity was observed in the sample activated for 10 min. Also, the sample activated for 10 min exhibits relatively low values of loss tangent, compared to the other mechanically activated samples, providing the best overall dielectric performance compared to other samples.
T2  - Science of Sintering
T1  - Dielectric Properties of Mechanically Activated Strontium Titanate Ceramics
SP  - 401
EP  - 414
VL  - 54
IS  - 4
DO  - 10.2298/SOS2204401Z
UR  - https://hdl.handle.net/21.15107/rcub_dais_13510
ER  - 

@article{
author = "Živojinović, Jelena and Kosanović, Darko and Blagojević, Vladimir A. and Pavlović, Vera P. and Tadić, Nenad and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2022",
abstract = "In this study, microstructure evolution and dielectric properties of SrTiO3 ceramic have been investigated, whereby mechanical activation of SrTiO3 powders was used to modify the functional properties of ceramic materials. Microstructural SEM analysis of SrTiO3 ceramics showed that the increase in mechanical activation time results in less porous samples. Raman spectroscopy indicated changes in the broadening and asymmetry of the TO2 mode with a change in the time of mechanical activation. TO2 mode showed a Fano asymmetry due to its interaction with polarization fluctuations in polar micro-regions, which are a consequence of the presence of oxygen vacancies caused by activation. The maximum value of dielectric permittivity was observed in the sample activated for 10 min. Also, the sample activated for 10 min exhibits relatively low values of loss tangent, compared to the other mechanically activated samples, providing the best overall dielectric performance compared to other samples.",
journal = "Science of Sintering",
title = "Dielectric Properties of Mechanically Activated Strontium Titanate Ceramics",
pages = "401-414",
volume = "54",
number = "4",
doi = "10.2298/SOS2204401Z",
url = "https://hdl.handle.net/21.15107/rcub_dais_13510"
}

Živojinović, J., Kosanović, D., Blagojević, V. A., Pavlović, V. P., Tadić, N., Vlahović, B.,& Pavlović, V. B.. (2022). Dielectric Properties of Mechanically Activated Strontium Titanate Ceramics. in Science of Sintering, 54(4), 401-414.
https://doi.org/10.2298/SOS2204401Z
https://hdl.handle.net/21.15107/rcub_dais_13510

Živojinović J, Kosanović D, Blagojević VA, Pavlović VP, Tadić N, Vlahović B, Pavlović VB. Dielectric Properties of Mechanically Activated Strontium Titanate Ceramics. in Science of Sintering. 2022;54(4):401-414.
doi:10.2298/SOS2204401Z
https://hdl.handle.net/21.15107/rcub_dais_13510 .

Živojinović, Jelena, Kosanović, Darko, Blagojević, Vladimir A., Pavlović, Vera P., Tadić, Nenad, Vlahović, Branislav, Pavlović, Vladimir B., "Dielectric Properties of Mechanically Activated Strontium Titanate Ceramics" in Science of Sintering, 54, no. 4 (2022):401-414,
https://doi.org/10.2298/SOS2204401Z .,
https://hdl.handle.net/21.15107/rcub_dais_13510 .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Blagojević, Vladimir A.
AU  - Andričević, Pavao
AU  - Pavlović, Vera P.
AU  - Horváth, Endre
AU  - Forró, László
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
AU  - Janaćković, Đorđe
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13627
AB  - The aim of this study was to investigate the influence of the deposition of vanadium oxide epitaxial layer on the photoresponse of TiO2/CH3NH3PbI3 heterojunction. TiO2 nanotube array was synthesized via anodization of titanium foil at three different voltages. After annealing at 450 °C, vanadium oxide was deposited by direct deposition from vanadyl(IV) sulfate solution. Microstructure analysis has been used for the investigation of the influence of different voltages of anodization on tube diameter. Spectroscopy measurements pointed out the red shift in diffusion reflectance spectra after deposition of vanadium oxide. The presence of V5+ oxidation state has been detected on the surface of nanotube arrays by chemical analysis. CH3NH3PbI3 monocrystal was dry pressed on top of the nanotubes in order to make a photodiode. The current-voltage characteristics of the photodiode were recorded and it was observed that the sample with the smallest wall thickness and higher amount of vanadium has the best photocurrent response.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application X New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 26-27. September 2022.
T1  - Characteristic of photodiode based on vanadium oxide-TiO2 nanotubes/CH3NH3PbI3
SP  - 90
EP  - 90
UR  - https://hdl.handle.net/21.15107/rcub_dais_13627
ER  - 

@conference{
author = "Vujančević, Jelena and Blagojević, Vladimir A. and Andričević, Pavao and Pavlović, Vera P. and Horváth, Endre and Forró, László and Vlahović, Branislav and Pavlović, Vladimir B. and Janaćković, Đorđe",
year = "2022",
abstract = "The aim of this study was to investigate the influence of the deposition of vanadium oxide epitaxial layer on the photoresponse of TiO2/CH3NH3PbI3 heterojunction. TiO2 nanotube array was synthesized via anodization of titanium foil at three different voltages. After annealing at 450 °C, vanadium oxide was deposited by direct deposition from vanadyl(IV) sulfate solution. Microstructure analysis has been used for the investigation of the influence of different voltages of anodization on tube diameter. Spectroscopy measurements pointed out the red shift in diffusion reflectance spectra after deposition of vanadium oxide. The presence of V5+ oxidation state has been detected on the surface of nanotube arrays by chemical analysis. CH3NH3PbI3 monocrystal was dry pressed on top of the nanotubes in order to make a photodiode. The current-voltage characteristics of the photodiode were recorded and it was observed that the sample with the smallest wall thickness and higher amount of vanadium has the best photocurrent response.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application X New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 26-27. September 2022.",
title = "Characteristic of photodiode based on vanadium oxide-TiO2 nanotubes/CH3NH3PbI3",
pages = "90-90",
url = "https://hdl.handle.net/21.15107/rcub_dais_13627"
}

Vujančević, J., Blagojević, V. A., Andričević, P., Pavlović, V. P., Horváth, E., Forró, L., Vlahović, B., Pavlović, V. B.,& Janaćković, Đ.. (2022). Characteristic of photodiode based on vanadium oxide-TiO2 nanotubes/CH3NH3PbI3. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application X New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 26-27. September 2022.
Belgrade : Serbian Ceramic Society., 90-90.
https://hdl.handle.net/21.15107/rcub_dais_13627

Vujančević J, Blagojević VA, Andričević P, Pavlović VP, Horváth E, Forró L, Vlahović B, Pavlović VB, Janaćković Đ. Characteristic of photodiode based on vanadium oxide-TiO2 nanotubes/CH3NH3PbI3. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application X New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 26-27. September 2022.. 2022;:90-90.
https://hdl.handle.net/21.15107/rcub_dais_13627 .

Vujančević, Jelena, Blagojević, Vladimir A., Andričević, Pavao, Pavlović, Vera P., Horváth, Endre, Forró, László, Vlahović, Branislav, Pavlović, Vladimir B., Janaćković, Đorđe, "Characteristic of photodiode based on vanadium oxide-TiO2 nanotubes/CH3NH3PbI3" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application X New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 26-27. September 2022. (2022):90-90,
https://hdl.handle.net/21.15107/rcub_dais_13627 .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Blagojević, Vladimir
AU  - Andričević, Pavao
AU  - Pavlović, Vera P.
AU  - Horváth, Endre
AU  - Forró, László
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
AU  - Janaćković, Đorđe
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12398
AB  - The aim of this study was to investigate the influence of vanadium oxide photosensitive surface layer on the photoactivity of TiO2 nanotubes. Nanotube arrays were synthesized by anodization of titanium foil at different voltages, and vanadium-oxide was deposited by wet chemical deposition. Deposition of the vanadium-oxide layer was confirmed by XPS analysis, which provided the chemical composition of the sample surface. Photovoltaic characteristics and photocatalytic performance for photodegradation of methyl orange dye of modified TiO2 nanotubes were correlated with the nanotube morphology (and anodization voltage). Optimal anodization voltage was determined, in conjunction with the deposition of the surface vanadium oxide layer, in order to achieve maximum performance of the modified TiO2 electrodes. This has been correlated with changes in the optical properties of the TiO2 electrodes, the nanotube length and diameter, as they occur with the change in the anodization voltage, as well as the changes in the vanadium-oxide content in the samples, where the vanadium-oxide content was found to be determined by the nanotube morphology. The photovoltaic performance of the optimized modified TiO2 electrode with the surface vanadium-oxide layer was found to be significantly better than both the performance of the corresponding TiO2 electrode, and the performance of all the other TiO2 electrodes included in the study.
PB  - Novi Sad : Faculty of Technology
C3  - Programme and book of abstracts / 14th ECerS Conference for Young Scientists in Ceramics (CYSC-2021), October 20-23, 2021, Novi Sad
T1  - Photoactivity of vanadium oxide TiO2 nanotubes
SP  - 92
EP  - 92
UR  - https://hdl.handle.net/21.15107/rcub_dais_12398
ER  - 

@conference{
author = "Vujančević, Jelena and Blagojević, Vladimir and Andričević, Pavao and Pavlović, Vera P. and Horváth, Endre and Forró, László and Vlahović, Branislav and Pavlović, Vladimir B. and Janaćković, Đorđe",
year = "2021",
abstract = "The aim of this study was to investigate the influence of vanadium oxide photosensitive surface layer on the photoactivity of TiO2 nanotubes. Nanotube arrays were synthesized by anodization of titanium foil at different voltages, and vanadium-oxide was deposited by wet chemical deposition. Deposition of the vanadium-oxide layer was confirmed by XPS analysis, which provided the chemical composition of the sample surface. Photovoltaic characteristics and photocatalytic performance for photodegradation of methyl orange dye of modified TiO2 nanotubes were correlated with the nanotube morphology (and anodization voltage). Optimal anodization voltage was determined, in conjunction with the deposition of the surface vanadium oxide layer, in order to achieve maximum performance of the modified TiO2 electrodes. This has been correlated with changes in the optical properties of the TiO2 electrodes, the nanotube length and diameter, as they occur with the change in the anodization voltage, as well as the changes in the vanadium-oxide content in the samples, where the vanadium-oxide content was found to be determined by the nanotube morphology. The photovoltaic performance of the optimized modified TiO2 electrode with the surface vanadium-oxide layer was found to be significantly better than both the performance of the corresponding TiO2 electrode, and the performance of all the other TiO2 electrodes included in the study.",
publisher = "Novi Sad : Faculty of Technology",
journal = "Programme and book of abstracts / 14th ECerS Conference for Young Scientists in Ceramics (CYSC-2021), October 20-23, 2021, Novi Sad",
title = "Photoactivity of vanadium oxide TiO2 nanotubes",
pages = "92-92",
url = "https://hdl.handle.net/21.15107/rcub_dais_12398"
}

Vujančević, J., Blagojević, V., Andričević, P., Pavlović, V. P., Horváth, E., Forró, L., Vlahović, B., Pavlović, V. B.,& Janaćković, Đ.. (2021). Photoactivity of vanadium oxide TiO2 nanotubes. in Programme and book of abstracts / 14th ECerS Conference for Young Scientists in Ceramics (CYSC-2021), October 20-23, 2021, Novi Sad
Novi Sad : Faculty of Technology., 92-92.
https://hdl.handle.net/21.15107/rcub_dais_12398

Vujančević J, Blagojević V, Andričević P, Pavlović VP, Horváth E, Forró L, Vlahović B, Pavlović VB, Janaćković Đ. Photoactivity of vanadium oxide TiO2 nanotubes. in Programme and book of abstracts / 14th ECerS Conference for Young Scientists in Ceramics (CYSC-2021), October 20-23, 2021, Novi Sad. 2021;:92-92.
https://hdl.handle.net/21.15107/rcub_dais_12398 .

Vujančević, Jelena, Blagojević, Vladimir, Andričević, Pavao, Pavlović, Vera P., Horváth, Endre, Forró, László, Vlahović, Branislav, Pavlović, Vladimir B., Janaćković, Đorđe, "Photoactivity of vanadium oxide TiO2 nanotubes" in Programme and book of abstracts / 14th ECerS Conference for Young Scientists in Ceramics (CYSC-2021), October 20-23, 2021, Novi Sad (2021):92-92,
https://hdl.handle.net/21.15107/rcub_dais_12398 .

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Labus, Nebojša
AU  - Pavlović, Vera P.
AU  - Marković, Smilja
AU  - Luković, Miloljub D.
AU  - Tadić, Nenad B.
AU  - Vujančević, Jelena
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11954
AB  - Nanocrystalline Zn2SnO4/SnO2 powder was obtained by a solid state reaction of ZnO and SnO2 nanopowders mixed in the molar ratio 1:1. The phase composition of the obtained powder was studied by XRD and Raman spectroscopy, morphology and texture were characterized by FESEM, TEM, BET and Hg porosimetry, while XPS and FTIR spectroscopy were used to determine the surface chemistry. The influence of humidity on complex impedance was monitored on bulk samples in the relative humidity (RH) range 30–90% in a climatic chamber in the frequency range 42 Hz- 1 MHz at working temperatures of 25 and 50 °C. Change in RH had a significant influence on impedance reduction, especially noticeable in the lower frequency range, indicating potential application of this nanocomposite as a humidity sensing material. Increase in RH led to an increase in AC conductivity that changed with frequency according to the Jonscher power law. The frequency exponent decreased with increase in RH and sample temperature indicating that the correlated hopping barrier model is the dominant conduction mechanism. Complex impedance was analyzed using an equivalent circuit consisting of a parallel resistance and constant phase element, showing the dominant influence of grain boundaries at both working temperatures (25 and 50 °C). The resistance decreased, while the capacitance and relaxation frequency increased with increase in RH. At high humidity an added Wartburg element enabled modeling of the charge diffusion process
PB  - Springer
T2  - Journal of Electroceramics
T1  - Nanocrystalline Zn2SnO4/SnO2: Crystal structure and humidity influence on complex impedance
SP  - 135
EP  - 147
VL  - 45
DO  - 10.1007/s10832-021-00232-z
UR  - https://hdl.handle.net/21.15107/rcub_dais_11954
ER  - 

@article{
author = "Nikolić, Maria Vesna and Labus, Nebojša and Pavlović, Vera P. and Marković, Smilja and Luković, Miloljub D. and Tadić, Nenad B. and Vujančević, Jelena and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2021",
abstract = "Nanocrystalline Zn2SnO4/SnO2 powder was obtained by a solid state reaction of ZnO and SnO2 nanopowders mixed in the molar ratio 1:1. The phase composition of the obtained powder was studied by XRD and Raman spectroscopy, morphology and texture were characterized by FESEM, TEM, BET and Hg porosimetry, while XPS and FTIR spectroscopy were used to determine the surface chemistry. The influence of humidity on complex impedance was monitored on bulk samples in the relative humidity (RH) range 30–90% in a climatic chamber in the frequency range 42 Hz- 1 MHz at working temperatures of 25 and 50 °C. Change in RH had a significant influence on impedance reduction, especially noticeable in the lower frequency range, indicating potential application of this nanocomposite as a humidity sensing material. Increase in RH led to an increase in AC conductivity that changed with frequency according to the Jonscher power law. The frequency exponent decreased with increase in RH and sample temperature indicating that the correlated hopping barrier model is the dominant conduction mechanism. Complex impedance was analyzed using an equivalent circuit consisting of a parallel resistance and constant phase element, showing the dominant influence of grain boundaries at both working temperatures (25 and 50 °C). The resistance decreased, while the capacitance and relaxation frequency increased with increase in RH. At high humidity an added Wartburg element enabled modeling of the charge diffusion process",
publisher = "Springer",
journal = "Journal of Electroceramics",
title = "Nanocrystalline Zn2SnO4/SnO2: Crystal structure and humidity influence on complex impedance",
pages = "135-147",
volume = "45",
doi = "10.1007/s10832-021-00232-z",
url = "https://hdl.handle.net/21.15107/rcub_dais_11954"
}

Nikolić, M. V., Labus, N., Pavlović, V. P., Marković, S., Luković, M. D., Tadić, N. B., Vujančević, J., Vlahović, B.,& Pavlović, V. B.. (2021). Nanocrystalline Zn2SnO4/SnO2: Crystal structure and humidity influence on complex impedance. in Journal of Electroceramics
Springer., 45, 135-147.
https://doi.org/10.1007/s10832-021-00232-z
https://hdl.handle.net/21.15107/rcub_dais_11954

Nikolić MV, Labus N, Pavlović VP, Marković S, Luković MD, Tadić NB, Vujančević J, Vlahović B, Pavlović VB. Nanocrystalline Zn2SnO4/SnO2: Crystal structure and humidity influence on complex impedance. in Journal of Electroceramics. 2021;45:135-147.
doi:10.1007/s10832-021-00232-z
https://hdl.handle.net/21.15107/rcub_dais_11954 .

Nikolić, Maria Vesna, Labus, Nebojša, Pavlović, Vera P., Marković, Smilja, Luković, Miloljub D., Tadić, Nenad B., Vujančević, Jelena, Vlahović, Branislav, Pavlović, Vladimir B., "Nanocrystalline Zn2SnO4/SnO2: Crystal structure and humidity influence on complex impedance" in Journal of Electroceramics, 45 (2021):135-147,
https://doi.org/10.1007/s10832-021-00232-z .,
https://hdl.handle.net/21.15107/rcub_dais_11954 .

TY  - CONF
AU  - Mitić, Vojislav V.
AU  - Marković, Bojana
AU  - Aleksić, Sanja
AU  - Milošević, Dušan
AU  - Ranđelović, Branislav
AU  - Ilić, Ivana
AU  - Manojlović, Jelena
AU  - Vlahović, Branislav
PY  - 2021
UR  - https://www.etran.rs/2021/wp-content/uploads/2021/08/PROGRAM_ETRAN_2021_final_b5_za_web.pdf
UR  - https://dais.sanu.ac.rs/123456789/12285
AB  - Structures and different life functions of microorganisms, like motion, are based on molecular biology processes, which comprise molecular and submolecular particles. It is very important to determine relation between molecular and microorganisms levels. The aim of our research is the analysis of Brownian motion as a general phenomenon and the consequence of structures hierarchy from molecular to microorganisms level. If we approach this idea from the aspect of biomimetic correlations at the level of the alive and nonalive matter system particles, the condensed matter particles could be considered as a part of micro, nano and molecular microorganisms structures. In this research we used the experimental results of bacterial motion influenced by different energy impulses. The important goal of this research paper is to obtain significant data regarding Brownian motion in the frame of fractal nature similarities, as an integrative property of living and nonliving systems particles processes. This opens new frontiers for submicroelectronics relations within the integrated supermicro biophysical systems. This is a potential new trend in nowadays advanced research, where we integrate the knowledges of complex relations between the electrons or other particles and their clusters as joint structures in alive and condensed matter, what could be a possible direction for new microelectronics complex biodevices and integrations.
PB  - Belgrade : Društvo za ETRAN
PB  - Beograd : Akademska misao
C3  - Зборник радова ‐ 65. Конференција за електронику, телекомуникације, рачунарство, аутоматику и нуклеарну технику, Етно село Станишићи, 08‐10.09.2021. године / Proceedings of Papers – 8th International Conference on Electrical, Electronic and Computing Engineering, IcETRAN 2021, Ethno willage Stanišići, Republic of Srpska, Bosnia and Herzegovina
T1  - Biomolecules and Brownian motion
SP  - 404
EP  - 408
UR  - https://hdl.handle.net/21.15107/rcub_dais_12285
ER  - 

@conference{
author = "Mitić, Vojislav V. and Marković, Bojana and Aleksić, Sanja and Milošević, Dušan and Ranđelović, Branislav and Ilić, Ivana and Manojlović, Jelena and Vlahović, Branislav",
year = "2021",
abstract = "Structures and different life functions of microorganisms, like motion, are based on molecular biology processes, which comprise molecular and submolecular particles. It is very important to determine relation between molecular and microorganisms levels. The aim of our research is the analysis of Brownian motion as a general phenomenon and the consequence of structures hierarchy from molecular to microorganisms level. If we approach this idea from the aspect of biomimetic correlations at the level of the alive and nonalive matter system particles, the condensed matter particles could be considered as a part of micro, nano and molecular microorganisms structures. In this research we used the experimental results of bacterial motion influenced by different energy impulses. The important goal of this research paper is to obtain significant data regarding Brownian motion in the frame of fractal nature similarities, as an integrative property of living and nonliving systems particles processes. This opens new frontiers for submicroelectronics relations within the integrated supermicro biophysical systems. This is a potential new trend in nowadays advanced research, where we integrate the knowledges of complex relations between the electrons or other particles and their clusters as joint structures in alive and condensed matter, what could be a possible direction for new microelectronics complex biodevices and integrations.",
publisher = "Belgrade : Društvo za ETRAN, Beograd : Akademska misao",
journal = "Зборник радова ‐ 65. Конференција за електронику, телекомуникације, рачунарство, аутоматику и нуклеарну технику, Етно село Станишићи, 08‐10.09.2021. године / Proceedings of Papers – 8th International Conference on Electrical, Electronic and Computing Engineering, IcETRAN 2021, Ethno willage Stanišići, Republic of Srpska, Bosnia and Herzegovina",
title = "Biomolecules and Brownian motion",
pages = "404-408",
url = "https://hdl.handle.net/21.15107/rcub_dais_12285"
}

Mitić, V. V., Marković, B., Aleksić, S., Milošević, D., Ranđelović, B., Ilić, I., Manojlović, J.,& Vlahović, B.. (2021). Biomolecules and Brownian motion. in Зборник радова ‐ 65. Конференција за електронику, телекомуникације, рачунарство, аутоматику и нуклеарну технику, Етно село Станишићи, 08‐10.09.2021. године / Proceedings of Papers – 8th International Conference on Electrical, Electronic and Computing Engineering, IcETRAN 2021, Ethno willage Stanišići, Republic of Srpska, Bosnia and Herzegovina
Belgrade : Društvo za ETRAN., 404-408.
https://hdl.handle.net/21.15107/rcub_dais_12285

Mitić VV, Marković B, Aleksić S, Milošević D, Ranđelović B, Ilić I, Manojlović J, Vlahović B. Biomolecules and Brownian motion. in Зборник радова ‐ 65. Конференција за електронику, телекомуникације, рачунарство, аутоматику и нуклеарну технику, Етно село Станишићи, 08‐10.09.2021. године / Proceedings of Papers – 8th International Conference on Electrical, Electronic and Computing Engineering, IcETRAN 2021, Ethno willage Stanišići, Republic of Srpska, Bosnia and Herzegovina. 2021;:404-408.
https://hdl.handle.net/21.15107/rcub_dais_12285 .

Mitić, Vojislav V., Marković, Bojana, Aleksić, Sanja, Milošević, Dušan, Ranđelović, Branislav, Ilić, Ivana, Manojlović, Jelena, Vlahović, Branislav, "Biomolecules and Brownian motion" in Зборник радова ‐ 65. Конференција за електронику, телекомуникације, рачунарство, аутоматику и нуклеарну технику, Етно село Станишићи, 08‐10.09.2021. године / Proceedings of Papers – 8th International Conference on Electrical, Electronic and Computing Engineering, IcETRAN 2021, Ethno willage Stanišići, Republic of Srpska, Bosnia and Herzegovina (2021):404-408,
https://hdl.handle.net/21.15107/rcub_dais_12285 .

TY  - CONF
AU  - Mitić, Vojislav V.
AU  - Marković, Bojana
AU  - Aleksić, Sanja
AU  - Milošević, Dušan
AU  - Ranđelović, Branislav
AU  - Ilić, Ivana
AU  - Manojlović, Jelena
AU  - Vlahović, Branislav
PY  - 2021
UR  - https://www.etran.rs/2021/wp-content/uploads/2021/08/PROGRAM_ETRAN_2021_final_b5_za_web.pdf
UR  - https://dais.sanu.ac.rs/123456789/11919
AB  - Structures and different life functions of microorganisms, like motion, are based on molecular biology processes, which comprise molecular and submolecular particles. It is very important to determine relation between molecular and microorganisms levels. The aim of our research is the analysis of Brownian motion as a general phenomenon and the consequence of structures hierarchy from molecular to microorganisms level. If we approach this idea from the aspect of biomimetic correlations at the level of the alive and nonalive matter system particles, the condensed matter particles could be considered as a part of micro, nano and molecular microorganisms structures. In this research we used the experimental results of bacterial motion influenced by different energy impulses. The important goal of this research paper is to obtain significant data regarding Brownian motion in the frame of fractal nature similarities, as an integrative property of living and nonliving systems particles processes. This opens new frontiers for submicroelectronics relations within the integrated supermicro biophysical systems. This is a potential new trend in nowadays advanced research, where we integrate the knowledges of complex relations between the electrons or other particles and their clusters as joint structures in alive and condensed matter, what could be a possible direction for new microelectronics complex biodevices and integrations.
PB  - Belgrade : ETRAN
C3  - Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina
T1  - Biomolecules and Brownian motion
SP  - 31
EP  - 31
UR  - https://hdl.handle.net/21.15107/rcub_dais_11919
ER  - 

@conference{
author = "Mitić, Vojislav V. and Marković, Bojana and Aleksić, Sanja and Milošević, Dušan and Ranđelović, Branislav and Ilić, Ivana and Manojlović, Jelena and Vlahović, Branislav",
year = "2021",
abstract = "Structures and different life functions of microorganisms, like motion, are based on molecular biology processes, which comprise molecular and submolecular particles. It is very important to determine relation between molecular and microorganisms levels. The aim of our research is the analysis of Brownian motion as a general phenomenon and the consequence of structures hierarchy from molecular to microorganisms level. If we approach this idea from the aspect of biomimetic correlations at the level of the alive and nonalive matter system particles, the condensed matter particles could be considered as a part of micro, nano and molecular microorganisms structures. In this research we used the experimental results of bacterial motion influenced by different energy impulses. The important goal of this research paper is to obtain significant data regarding Brownian motion in the frame of fractal nature similarities, as an integrative property of living and nonliving systems particles processes. This opens new frontiers for submicroelectronics relations within the integrated supermicro biophysical systems. This is a potential new trend in nowadays advanced research, where we integrate the knowledges of complex relations between the electrons or other particles and their clusters as joint structures in alive and condensed matter, what could be a possible direction for new microelectronics complex biodevices and integrations.",
publisher = "Belgrade : ETRAN",
journal = "Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina",
title = "Biomolecules and Brownian motion",
pages = "31-31",
url = "https://hdl.handle.net/21.15107/rcub_dais_11919"
}

Mitić, V. V., Marković, B., Aleksić, S., Milošević, D., Ranđelović, B., Ilić, I., Manojlović, J.,& Vlahović, B.. (2021). Biomolecules and Brownian motion. in Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina
Belgrade : ETRAN., 31-31.
https://hdl.handle.net/21.15107/rcub_dais_11919

Mitić VV, Marković B, Aleksić S, Milošević D, Ranđelović B, Ilić I, Manojlović J, Vlahović B. Biomolecules and Brownian motion. in Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina. 2021;:31-31.
https://hdl.handle.net/21.15107/rcub_dais_11919 .

Mitić, Vojislav V., Marković, Bojana, Aleksić, Sanja, Milošević, Dušan, Ranđelović, Branislav, Ilić, Ivana, Manojlović, Jelena, Vlahović, Branislav, "Biomolecules and Brownian motion" in Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina (2021):31-31,
https://hdl.handle.net/21.15107/rcub_dais_11919 .

TY  - CONF
AU  - Mitić, Vojislav V.
AU  - Serpa, Cristina
AU  - Stajčić, Aleksandar
AU  - Khamoushi, Kouros
AU  - Paunović, Vesna
AU  - Aleksić, Sanja
AU  - Vlahović, Branislav
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11907
AB  - Neodymium zinc titanate (NZT) is a very attractive perovskite due to its magnetic and dielectric properties. Considering the microstructure influence NZT stability and performance, it is of great importance to establish an approach for the analysis and prediction of grain boundary phenomena. The fractal nature analysis has already proved to be valuable for the reconstruction and prediction of ceramics intergranular electrical properties. However, no researches were performed on the fractal analysis applied on magnetic materials. This method could give an insight in magnetic properties change from the bulk to the grain interface level. In this study, fractal analysis was applied for the Curie-Weiss law correction, introducing fractal correction into magnetic materials for the first time. NZT powders used in this research for fractal analysis were obtained after sintering at different temperatures in the range from 1450°C to 1675°C.Connection between the microstructure fractal nature and the resulting magnetic permeability has been established, enabling the application on different magnetic materials in the future. This creates a foundation for new researches that will lead to further miniaturization of satellite and mobile devices.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
T1  - Magnetic materials, Curie-Weiss law and fractal correction
SP  - 46
EP  - 46
UR  - https://hdl.handle.net/21.15107/rcub_dais_11907
ER  - 

@conference{
author = "Mitić, Vojislav V. and Serpa, Cristina and Stajčić, Aleksandar and Khamoushi, Kouros and Paunović, Vesna and Aleksić, Sanja and Vlahović, Branislav",
year = "2021",
abstract = "Neodymium zinc titanate (NZT) is a very attractive perovskite due to its magnetic and dielectric properties. Considering the microstructure influence NZT stability and performance, it is of great importance to establish an approach for the analysis and prediction of grain boundary phenomena. The fractal nature analysis has already proved to be valuable for the reconstruction and prediction of ceramics intergranular electrical properties. However, no researches were performed on the fractal analysis applied on magnetic materials. This method could give an insight in magnetic properties change from the bulk to the grain interface level. In this study, fractal analysis was applied for the Curie-Weiss law correction, introducing fractal correction into magnetic materials for the first time. NZT powders used in this research for fractal analysis were obtained after sintering at different temperatures in the range from 1450°C to 1675°C.Connection between the microstructure fractal nature and the resulting magnetic permeability has been established, enabling the application on different magnetic materials in the future. This creates a foundation for new researches that will lead to further miniaturization of satellite and mobile devices.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021",
title = "Magnetic materials, Curie-Weiss law and fractal correction",
pages = "46-46",
url = "https://hdl.handle.net/21.15107/rcub_dais_11907"
}

Mitić, V. V., Serpa, C., Stajčić, A., Khamoushi, K., Paunović, V., Aleksić, S.,& Vlahović, B.. (2021). Magnetic materials, Curie-Weiss law and fractal correction. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
Belgrade : Serbian Ceramic Society., 46-46.
https://hdl.handle.net/21.15107/rcub_dais_11907

Mitić VV, Serpa C, Stajčić A, Khamoushi K, Paunović V, Aleksić S, Vlahović B. Magnetic materials, Curie-Weiss law and fractal correction. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021. 2021;:46-46.
https://hdl.handle.net/21.15107/rcub_dais_11907 .

Mitić, Vojislav V., Serpa, Cristina, Stajčić, Aleksandar, Khamoushi, Kouros, Paunović, Vesna, Aleksić, Sanja, Vlahović, Branislav, "Magnetic materials, Curie-Weiss law and fractal correction" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021 (2021):46-46,
https://hdl.handle.net/21.15107/rcub_dais_11907 .

TY  - CONF
AU  - Ribar, Srđan
AU  - Mitić, Vojislav V.
AU  - Ranđelović, Branislav
AU  - Milošević, Dušan
AU  - Paunović, Vesna
AU  - Fecht, Hans-Jörg
AU  - Vlahović, Branislav
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11909
AB  - Predicting the ceramic materials properties and designing the desired microstructures characteristics are very important objectives in ceramic samples consolidating process. The goal of our research is to calculate the density within consolidated BaTiO3-ceramic samples for different consolidation parameters, like sintering temperature, using obtained experimental data from the material’s surface, by applying back propagation neural network (BP). This method, as a very powerful tool, provides the possibility to calculate the exact values of desired microelectronic parameter at the level of the grains’ coating layers. The artificial neural networks, which have biomimetic similarities with biological neural networks, propagate the input signal forward, unlike the output signal, designated as error, which is propagated backwards spreading throughout the whole network, from output to input neuron layers. Between these two neuron layers, there are usually one or more hidden layers, where the grains of the sintered material are represented by network neurons. Adjustable coefficients, called weights, are forward propagated, like input signals, but they modify the calculated output error, so the neural network training procedure is necessary for reducing the error. Different consolidated samples density values, measured on the bulk, substituted the errors, which are calculated as contribution of all network elements, thus enabling the density calculation of all constituents of ceramic structure presented by neural network. In our future research we plan to increase the number of neurons and hidden layers in order to improve this method to become even more accurate and precise.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
T1  - The ceramics materials density defined by artificial neural networks
SP  - 42
EP  - 42
UR  - https://hdl.handle.net/21.15107/rcub_dais_11909
ER  - 

@conference{
author = "Ribar, Srđan and Mitić, Vojislav V. and Ranđelović, Branislav and Milošević, Dušan and Paunović, Vesna and Fecht, Hans-Jörg and Vlahović, Branislav",
year = "2021",
abstract = "Predicting the ceramic materials properties and designing the desired microstructures characteristics are very important objectives in ceramic samples consolidating process. The goal of our research is to calculate the density within consolidated BaTiO3-ceramic samples for different consolidation parameters, like sintering temperature, using obtained experimental data from the material’s surface, by applying back propagation neural network (BP). This method, as a very powerful tool, provides the possibility to calculate the exact values of desired microelectronic parameter at the level of the grains’ coating layers. The artificial neural networks, which have biomimetic similarities with biological neural networks, propagate the input signal forward, unlike the output signal, designated as error, which is propagated backwards spreading throughout the whole network, from output to input neuron layers. Between these two neuron layers, there are usually one or more hidden layers, where the grains of the sintered material are represented by network neurons. Adjustable coefficients, called weights, are forward propagated, like input signals, but they modify the calculated output error, so the neural network training procedure is necessary for reducing the error. Different consolidated samples density values, measured on the bulk, substituted the errors, which are calculated as contribution of all network elements, thus enabling the density calculation of all constituents of ceramic structure presented by neural network. In our future research we plan to increase the number of neurons and hidden layers in order to improve this method to become even more accurate and precise.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021",
title = "The ceramics materials density defined by artificial neural networks",
pages = "42-42",
url = "https://hdl.handle.net/21.15107/rcub_dais_11909"
}

Ribar, S., Mitić, V. V., Ranđelović, B., Milošević, D., Paunović, V., Fecht, H.,& Vlahović, B.. (2021). The ceramics materials density defined by artificial neural networks. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
Belgrade : Serbian Ceramic Society., 42-42.
https://hdl.handle.net/21.15107/rcub_dais_11909

Ribar S, Mitić VV, Ranđelović B, Milošević D, Paunović V, Fecht H, Vlahović B. The ceramics materials density defined by artificial neural networks. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021. 2021;:42-42.
https://hdl.handle.net/21.15107/rcub_dais_11909 .

Ribar, Srđan, Mitić, Vojislav V., Ranđelović, Branislav, Milošević, Dušan, Paunović, Vesna, Fecht, Hans-Jörg, Vlahović, Branislav, "The ceramics materials density defined by artificial neural networks" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021 (2021):42-42,
https://hdl.handle.net/21.15107/rcub_dais_11909 .

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Ranđelović, Branislav
AU  - Paunović, Vesna
AU  - Radović, Ivana
AU  - Stajčić, Aleksandar
AU  - Vlahović, Branislav
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12090
AB  - The focus of this study is on the control of layers between grains by applying graph theory. We performed modification of BaTiO3 nanoparticles with Y2O3. The results of capacitance change on submicron level are the part of the measured values on the bulk samples. The original idea is to develop the new approach to use graph theory for networking of electronic parameters between the neighboring grains in order to compare the values measured on the sample, and to present them through the edges in graph between corresponding vertices. Capacitance change with DC bias was measured on bulk samples, and the modified nanoparticles showed stability up to 90 V. After using graph theory with the different number of neighboring grains and on different voltages, it has been shown that capacitance change can be successfully calculated on the layers between grains. Original calculations presented as 1D cases were performed, confirming graph application as a tool with which measured bulk results can be downsized to an appropriate intergranular level, opening the new perspectives in the area of miniaturization and micropackaging.
PB  - Taylor & Francis Group
T2  - Ferroelectrics
T1  - Graph theory applied to microelectronics intergranular relations
SP  - 145
EP  - 152
VL  - 570
IS  - 1
DO  - 10.1080/00150193.2020.1839265
UR  - https://hdl.handle.net/21.15107/rcub_dais_12090
ER  - 

@article{
author = "Mitić, Vojislav V. and Lazović, Goran and Ranđelović, Branislav and Paunović, Vesna and Radović, Ivana and Stajčić, Aleksandar and Vlahović, Branislav",
year = "2021",
abstract = "The focus of this study is on the control of layers between grains by applying graph theory. We performed modification of BaTiO3 nanoparticles with Y2O3. The results of capacitance change on submicron level are the part of the measured values on the bulk samples. The original idea is to develop the new approach to use graph theory for networking of electronic parameters between the neighboring grains in order to compare the values measured on the sample, and to present them through the edges in graph between corresponding vertices. Capacitance change with DC bias was measured on bulk samples, and the modified nanoparticles showed stability up to 90 V. After using graph theory with the different number of neighboring grains and on different voltages, it has been shown that capacitance change can be successfully calculated on the layers between grains. Original calculations presented as 1D cases were performed, confirming graph application as a tool with which measured bulk results can be downsized to an appropriate intergranular level, opening the new perspectives in the area of miniaturization and micropackaging.",
publisher = "Taylor & Francis Group",
journal = "Ferroelectrics",
title = "Graph theory applied to microelectronics intergranular relations",
pages = "145-152",
volume = "570",
number = "1",
doi = "10.1080/00150193.2020.1839265",
url = "https://hdl.handle.net/21.15107/rcub_dais_12090"
}

Mitić, V. V., Lazović, G., Ranđelović, B., Paunović, V., Radović, I., Stajčić, A.,& Vlahović, B.. (2021). Graph theory applied to microelectronics intergranular relations. in Ferroelectrics
Taylor & Francis Group., 570(1), 145-152.
https://doi.org/10.1080/00150193.2020.1839265
https://hdl.handle.net/21.15107/rcub_dais_12090

Mitić VV, Lazović G, Ranđelović B, Paunović V, Radović I, Stajčić A, Vlahović B. Graph theory applied to microelectronics intergranular relations. in Ferroelectrics. 2021;570(1):145-152.
doi:10.1080/00150193.2020.1839265
https://hdl.handle.net/21.15107/rcub_dais_12090 .

Mitić, Vojislav V., Lazović, Goran, Ranđelović, Branislav, Paunović, Vesna, Radović, Ivana, Stajčić, Aleksandar, Vlahović, Branislav, "Graph theory applied to microelectronics intergranular relations" in Ferroelectrics, 570, no. 1 (2021):145-152,
https://doi.org/10.1080/00150193.2020.1839265 .,
https://hdl.handle.net/21.15107/rcub_dais_12090 .

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Ranđelović, Branislav
AU  - Ilić, Ivana
AU  - Ribar, Srđan
AU  - Chun, An-Lu
AU  - Stajčić, Aleksandar
AU  - Vlahović, Branislav
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4809
UR  - https://dais.sanu.ac.rs/123456789/11949
AB  - After pioneering attempts for the introduction of graph theory in the field of ceramics and microstructures, where 1D and 2D graphs were used, in this paper we applied 3D graphs for the breakdown voltage calculation in BaTiO3sample with some predefined constraints. We have described the relations between grains in the sample and established a mathematical approach for the calculation of breakdown voltage using experimental results. As a result, we introduced mapping between the property of sample and grain structure, then between the grain structure and mathematical graph, using various crystal structures. The main idea was to apply 3D graph theory for the distribution of electronic parameters between the neighboring grains. With this study, we successfully confirmed the possibilities for applications of graphs as a tool for the determination of properties even at the intergranular level.
PB  - World Scientific Publishing Co
T2  - International Journal of Modern Physics B
T1  - The 3D graph approach for breakdown voltage calculation in BaTiO3ceramics
SP  - 2150103
VL  - 35
IS  - 7
DO  - 10.1142/S0217979221501034
UR  - https://hdl.handle.net/21.15107/rcub_dais_11949
ER  - 

@article{
author = "Mitić, Vojislav V. and Ranđelović, Branislav and Ilić, Ivana and Ribar, Srđan and Chun, An-Lu and Stajčić, Aleksandar and Vlahović, Branislav",
year = "2021",
abstract = "After pioneering attempts for the introduction of graph theory in the field of ceramics and microstructures, where 1D and 2D graphs were used, in this paper we applied 3D graphs for the breakdown voltage calculation in BaTiO3sample with some predefined constraints. We have described the relations between grains in the sample and established a mathematical approach for the calculation of breakdown voltage using experimental results. As a result, we introduced mapping between the property of sample and grain structure, then between the grain structure and mathematical graph, using various crystal structures. The main idea was to apply 3D graph theory for the distribution of electronic parameters between the neighboring grains. With this study, we successfully confirmed the possibilities for applications of graphs as a tool for the determination of properties even at the intergranular level.",
publisher = "World Scientific Publishing Co",
journal = "International Journal of Modern Physics B",
title = "The 3D graph approach for breakdown voltage calculation in BaTiO3ceramics",
pages = "2150103",
volume = "35",
number = "7",
doi = "10.1142/S0217979221501034",
url = "https://hdl.handle.net/21.15107/rcub_dais_11949"
}

Mitić, V. V., Ranđelović, B., Ilić, I., Ribar, S., Chun, A., Stajčić, A.,& Vlahović, B.. (2021). The 3D graph approach for breakdown voltage calculation in BaTiO3ceramics. in International Journal of Modern Physics B
World Scientific Publishing Co., 35(7), 2150103.
https://doi.org/10.1142/S0217979221501034
https://hdl.handle.net/21.15107/rcub_dais_11949

Mitić VV, Ranđelović B, Ilić I, Ribar S, Chun A, Stajčić A, Vlahović B. The 3D graph approach for breakdown voltage calculation in BaTiO3ceramics. in International Journal of Modern Physics B. 2021;35(7):2150103.
doi:10.1142/S0217979221501034
https://hdl.handle.net/21.15107/rcub_dais_11949 .

Mitić, Vojislav V., Ranđelović, Branislav, Ilić, Ivana, Ribar, Srđan, Chun, An-Lu, Stajčić, Aleksandar, Vlahović, Branislav, "The 3D graph approach for breakdown voltage calculation in BaTiO3ceramics" in International Journal of Modern Physics B, 35, no. 7 (2021):2150103,
https://doi.org/10.1142/S0217979221501034 .,
https://hdl.handle.net/21.15107/rcub_dais_11949 .

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Radosavljevic-Mihajlovic, Ana S.
AU  - Milosević, Dusan
AU  - Marković, Bojana
AU  - Simeunović, Dragan
AU  - Vlahović, Branislav
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12393
AB  - Forensic photography, also referred to as crime scene photography, is an activity that records the initial appearance of the crime scene and physical evidence in order to provide a permanent record for the court. Nowadays, we cannot imagine a crime scene investigation without photographic evidence. Crime or accident scene photographs can often be reanalyzed in cold cases or when the images need to be enlarged to show critical details. Fractals are rough or fragmented geometric shapes that can be subdivided into parts, each of which is a reduced copy of the whole. Fractal dimension (FD) is an important fractal geometry feature. There are many applications of fractals in various forensic fields, including image processing, image analysis, texture segmentation, shape classification, and identifying the image features such as roughness and smoothness of an image. Fractal analysis is applicable in forensic archeology and paleontology, as well. The damaged image can be reviewed, analyzed, and reconstructed by fractal nature analysis.
PB  - World Scientific Pub Co Pte Ltd
T2  - Modern Physics Letters B
T1  - Forensic science and fractal nature analysis
VL  - 35
IS  - 32
DO  - 10.1142/S0217984921504935
UR  - https://hdl.handle.net/21.15107/rcub_dais_12393
ER  - 

@article{
author = "Mitić, Vojislav V. and Lazović, Goran and Radosavljevic-Mihajlovic, Ana S. and Milosević, Dusan and Marković, Bojana and Simeunović, Dragan and Vlahović, Branislav",
year = "2021",
abstract = "Forensic photography, also referred to as crime scene photography, is an activity that records the initial appearance of the crime scene and physical evidence in order to provide a permanent record for the court. Nowadays, we cannot imagine a crime scene investigation without photographic evidence. Crime or accident scene photographs can often be reanalyzed in cold cases or when the images need to be enlarged to show critical details. Fractals are rough or fragmented geometric shapes that can be subdivided into parts, each of which is a reduced copy of the whole. Fractal dimension (FD) is an important fractal geometry feature. There are many applications of fractals in various forensic fields, including image processing, image analysis, texture segmentation, shape classification, and identifying the image features such as roughness and smoothness of an image. Fractal analysis is applicable in forensic archeology and paleontology, as well. The damaged image can be reviewed, analyzed, and reconstructed by fractal nature analysis.",
publisher = "World Scientific Pub Co Pte Ltd",
journal = "Modern Physics Letters B",
title = "Forensic science and fractal nature analysis",
volume = "35",
number = "32",
doi = "10.1142/S0217984921504935",
url = "https://hdl.handle.net/21.15107/rcub_dais_12393"
}

Mitić, V. V., Lazović, G., Radosavljevic-Mihajlovic, A. S., Milosević, D., Marković, B., Simeunović, D.,& Vlahović, B.. (2021). Forensic science and fractal nature analysis. in Modern Physics Letters B
World Scientific Pub Co Pte Ltd., 35(32).
https://doi.org/10.1142/S0217984921504935
https://hdl.handle.net/21.15107/rcub_dais_12393

Mitić VV, Lazović G, Radosavljevic-Mihajlovic AS, Milosević D, Marković B, Simeunović D, Vlahović B. Forensic science and fractal nature analysis. in Modern Physics Letters B. 2021;35(32).
doi:10.1142/S0217984921504935
https://hdl.handle.net/21.15107/rcub_dais_12393 .

Mitić, Vojislav V., Lazović, Goran, Radosavljevic-Mihajlovic, Ana S., Milosević, Dusan, Marković, Bojana, Simeunović, Dragan, Vlahović, Branislav, "Forensic science and fractal nature analysis" in Modern Physics Letters B, 35, no. 32 (2021),
https://doi.org/10.1142/S0217984921504935 .,
https://hdl.handle.net/21.15107/rcub_dais_12393 .

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Milošević, Dušan
AU  - Ristanović, Elizabeta
AU  - Simeunović, Dragan
AU  - Tsay, Shwu-Chen
AU  - Milošević, Mimica
AU  - Vlahović, Branislav
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12390
AB  - The goal of our research is to establish the direction of coronavirus chaotic motion to control corona dynamic by fractal nature analysis. These microorganisms attaching the different cells and organs in the human body getting very dangerous because we don’t have corona antivirus prevention and protection but also the unpredictable these viruses motion directions what resulting in very important distractions. Our idea is to develop the method and procedure to control the virus motion direction with the intention to prognose on which cells and organs could attach. We combined very rear coronavirus motion sub-microstructures images from worldwide experimental microstructure analysis. The problem of the recording this motion is from one point of view magnification, but the other side in resolution, because the virus size is minimum 10 times less than bacterizes. But all these images have been good data to resolve by time interval method and fractals, the points on the motion trajectory. We successfully defined the diagrams on the way to establish control over Brownian chaotic motion as a bridge between chaotic disorder to control disorder. This opens a very new perspective to future research to get complete control of coronavirus cases.
PB  - World Scientific Pub Co Pte Ltd
T2  - Modern Physics Letters B
T1  - Brownian fractal nature coronavirus motion
SP  - 2150076
VL  - 35
IS  - 04
DO  - 10.1142/S0217984921500767
UR  - https://hdl.handle.net/21.15107/rcub_dais_12390
ER  - 

@article{
author = "Mitić, Vojislav V. and Lazović, Goran and Milošević, Dušan and Ristanović, Elizabeta and Simeunović, Dragan and Tsay, Shwu-Chen and Milošević, Mimica and Vlahović, Branislav",
year = "2021",
abstract = "The goal of our research is to establish the direction of coronavirus chaotic motion to control corona dynamic by fractal nature analysis. These microorganisms attaching the different cells and organs in the human body getting very dangerous because we don’t have corona antivirus prevention and protection but also the unpredictable these viruses motion directions what resulting in very important distractions. Our idea is to develop the method and procedure to control the virus motion direction with the intention to prognose on which cells and organs could attach. We combined very rear coronavirus motion sub-microstructures images from worldwide experimental microstructure analysis. The problem of the recording this motion is from one point of view magnification, but the other side in resolution, because the virus size is minimum 10 times less than bacterizes. But all these images have been good data to resolve by time interval method and fractals, the points on the motion trajectory. We successfully defined the diagrams on the way to establish control over Brownian chaotic motion as a bridge between chaotic disorder to control disorder. This opens a very new perspective to future research to get complete control of coronavirus cases.",
publisher = "World Scientific Pub Co Pte Ltd",
journal = "Modern Physics Letters B",
title = "Brownian fractal nature coronavirus motion",
pages = "2150076",
volume = "35",
number = "04",
doi = "10.1142/S0217984921500767",
url = "https://hdl.handle.net/21.15107/rcub_dais_12390"
}

Mitić, V. V., Lazović, G., Milošević, D., Ristanović, E., Simeunović, D., Tsay, S., Milošević, M.,& Vlahović, B.. (2021). Brownian fractal nature coronavirus motion. in Modern Physics Letters B
World Scientific Pub Co Pte Ltd., 35(04), 2150076.
https://doi.org/10.1142/S0217984921500767
https://hdl.handle.net/21.15107/rcub_dais_12390

Mitić VV, Lazović G, Milošević D, Ristanović E, Simeunović D, Tsay S, Milošević M, Vlahović B. Brownian fractal nature coronavirus motion. in Modern Physics Letters B. 2021;35(04):2150076.
doi:10.1142/S0217984921500767
https://hdl.handle.net/21.15107/rcub_dais_12390 .

Mitić, Vojislav V., Lazović, Goran, Milošević, Dušan, Ristanović, Elizabeta, Simeunović, Dragan, Tsay, Shwu-Chen, Milošević, Mimica, Vlahović, Branislav, "Brownian fractal nature coronavirus motion" in Modern Physics Letters B, 35, no. 04 (2021):2150076,
https://doi.org/10.1142/S0217984921500767 .,
https://hdl.handle.net/21.15107/rcub_dais_12390 .

TY  - JOUR
AU  - Aleksić, Sanja
AU  - Marković, Bojana
AU  - Mitić, Vojislav V.
AU  - Milošević, Dušan
AU  - Milošević, Mimica
AU  - Soković, Marina
AU  - Vlahović, Branislav
PY  - 2021
UR  - https://www.worldscientific.com/doi/abs/10.1142/S0218126622500748
UR  - https://dais.sanu.ac.rs/123456789/12388
AB  - Biophysical and condensed matter systems connection is of great importance nowadays due to the need for a new approach in microelectronic biodevices, biocomputers or biochips advanced development. Considering that the living and nonliving systems’ submicroparticles are identical, we can establish the biunivocally correspondent relation between these two particle systems, as a biomimetic correlation based on Brownian motion fractal nature similarities, as the integrative property. In our research, we used the experimental results of bacterial motion under the influence of energetic impulses, like music, and also some biomolecule motion data. Our goal is to define the relation between biophysical and physical particle systems, by introducing mathematical analytical forms and applying Brownian motion fractal nature characterization and fractal interpolation. This work is an advanced research in the field of new solutions for high-level microelectronic integrations, which include submicrobiosystems like part of even organic microelectronic considerations, together with some physical systems of particles in solid-state solutions as a nonorganic part. Our research is based on Brownian motion minimal joint properties within the integrated biophysical systems in the wholeness of nature.
PB  - World Scientific Publishing Company
T2  - Journal of Circuits, Systems and Computers
T1  - Interpolation Methods Applied on Biomolecules and Condensed Matter Brownian Motion
DO  - 10.1142/s0218126622500748
UR  - https://hdl.handle.net/21.15107/rcub_dais_12388
ER  - 

@article{
author = "Aleksić, Sanja and Marković, Bojana and Mitić, Vojislav V. and Milošević, Dušan and Milošević, Mimica and Soković, Marina and Vlahović, Branislav",
year = "2021",
abstract = "Biophysical and condensed matter systems connection is of great importance nowadays due to the need for a new approach in microelectronic biodevices, biocomputers or biochips advanced development. Considering that the living and nonliving systems’ submicroparticles are identical, we can establish the biunivocally correspondent relation between these two particle systems, as a biomimetic correlation based on Brownian motion fractal nature similarities, as the integrative property. In our research, we used the experimental results of bacterial motion under the influence of energetic impulses, like music, and also some biomolecule motion data. Our goal is to define the relation between biophysical and physical particle systems, by introducing mathematical analytical forms and applying Brownian motion fractal nature characterization and fractal interpolation. This work is an advanced research in the field of new solutions for high-level microelectronic integrations, which include submicrobiosystems like part of even organic microelectronic considerations, together with some physical systems of particles in solid-state solutions as a nonorganic part. Our research is based on Brownian motion minimal joint properties within the integrated biophysical systems in the wholeness of nature.",
publisher = "World Scientific Publishing Company",
journal = "Journal of Circuits, Systems and Computers",
title = "Interpolation Methods Applied on Biomolecules and Condensed Matter Brownian Motion",
doi = "10.1142/s0218126622500748",
url = "https://hdl.handle.net/21.15107/rcub_dais_12388"
}

Aleksić, S., Marković, B., Mitić, V. V., Milošević, D., Milošević, M., Soković, M.,& Vlahović, B.. (2021). Interpolation Methods Applied on Biomolecules and Condensed Matter Brownian Motion. in Journal of Circuits, Systems and Computers
World Scientific Publishing Company..
https://doi.org/10.1142/s0218126622500748
https://hdl.handle.net/21.15107/rcub_dais_12388

Aleksić S, Marković B, Mitić VV, Milošević D, Milošević M, Soković M, Vlahović B. Interpolation Methods Applied on Biomolecules and Condensed Matter Brownian Motion. in Journal of Circuits, Systems and Computers. 2021;.
doi:10.1142/s0218126622500748
https://hdl.handle.net/21.15107/rcub_dais_12388 .

Aleksić, Sanja, Marković, Bojana, Mitić, Vojislav V., Milošević, Dušan, Milošević, Mimica, Soković, Marina, Vlahović, Branislav, "Interpolation Methods Applied on Biomolecules and Condensed Matter Brownian Motion" in Journal of Circuits, Systems and Computers (2021),
https://doi.org/10.1142/s0218126622500748 .,
https://hdl.handle.net/21.15107/rcub_dais_12388 .

TY  - CONF
AU  - Mitić, Vojislav V.
AU  - Ranđelović, Branislav
AU  - Ribar, Srđan
AU  - Milošević, Dušan
AU  - Soković, Marina
AU  - Marković, Bojana
AU  - Fecht, Hans-Jörg
AU  - Vlahović, Branislav
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11908
AB  - There are a lot of recently published research papers regarding representing nanostructures and biomimetic materials, using simple but powerful mathematical methods. In most of them, fractal theory, graph theory and neural networks are used. Having in mind variety of those methods, but in the same time complementarity and compatibility, they became very useful tool, and we named it “Holly Trinity” of mathematical approach in nanostructures. In this research we give an overview on interesting results in modelling nanostructures and their electrochemical and magnetic parameters, using those very actual and “easy to use” methods: fractal theory, graph theory and neural networks. We also compare them, in order to conclude about areas of their most useful applications.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
T1  - Fractals, Graphs and Neural Networks: The Holly Trinity of Nanostructures - An Overview and Comparison of Methods
SP  - 43
EP  - 43
UR  - https://hdl.handle.net/21.15107/rcub_dais_11908
ER  - 

@conference{
author = "Mitić, Vojislav V. and Ranđelović, Branislav and Ribar, Srđan and Milošević, Dušan and Soković, Marina and Marković, Bojana and Fecht, Hans-Jörg and Vlahović, Branislav",
year = "2021",
abstract = "There are a lot of recently published research papers regarding representing nanostructures and biomimetic materials, using simple but powerful mathematical methods. In most of them, fractal theory, graph theory and neural networks are used. Having in mind variety of those methods, but in the same time complementarity and compatibility, they became very useful tool, and we named it “Holly Trinity” of mathematical approach in nanostructures. In this research we give an overview on interesting results in modelling nanostructures and their electrochemical and magnetic parameters, using those very actual and “easy to use” methods: fractal theory, graph theory and neural networks. We also compare them, in order to conclude about areas of their most useful applications.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021",
title = "Fractals, Graphs and Neural Networks: The Holly Trinity of Nanostructures - An Overview and Comparison of Methods",
pages = "43-43",
url = "https://hdl.handle.net/21.15107/rcub_dais_11908"
}

Mitić, V. V., Ranđelović, B., Ribar, S., Milošević, D., Soković, M., Marković, B., Fecht, H.,& Vlahović, B.. (2021). Fractals, Graphs and Neural Networks: The Holly Trinity of Nanostructures - An Overview and Comparison of Methods. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
Belgrade : Serbian Ceramic Society., 43-43.
https://hdl.handle.net/21.15107/rcub_dais_11908

Mitić VV, Ranđelović B, Ribar S, Milošević D, Soković M, Marković B, Fecht H, Vlahović B. Fractals, Graphs and Neural Networks: The Holly Trinity of Nanostructures - An Overview and Comparison of Methods. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021. 2021;:43-43.
https://hdl.handle.net/21.15107/rcub_dais_11908 .

Mitić, Vojislav V., Ranđelović, Branislav, Ribar, Srđan, Milošević, Dušan, Soković, Marina, Marković, Bojana, Fecht, Hans-Jörg, Vlahović, Branislav, "Fractals, Graphs and Neural Networks: The Holly Trinity of Nanostructures - An Overview and Comparison of Methods" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021 (2021):43-43,
https://hdl.handle.net/21.15107/rcub_dais_11908 .

TY  - CONF
AU  - Radović, Ivana
AU  - Mitić, Vojislav V.
AU  - Stajčić, Aleksandar
AU  - Serpa, Cristina
AU  - Ribar, Srđan
AU  - Ranđelović, Branislav
AU  - Vlahović, Branislav
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11906
AB  - Polymers offer the possibility of different reinforcement incorporation due to a broad range of chemical structures. Along with this feature, their light weight and processing ease made them a class of materials that have been applied in construction parts, drug delivery agents or electronic devices. Epoxy-based composites have used as insulators in microelectronic devices due to its chemical resistance, good adhesion properties and endurance. As epoxies have low fracture resistance, they are often reinforced with different kinds of fibers. With thorough knowledge of the structure, physical properties can be predicted and included in the processing of future composites, especially that electronic materials minituarization brought micro- and nanoscale level properties at spotlight. Fractal nature analysis is a mathematical method that has proved to be efficient in grain interface properties applied on perovskite ceramic materials. In our study, fiber shape reconstruction and determination of Hausdorff dimension have been achieved with the application of fractal regression model employed in software Fractal Real Finder opening a new path for the prediction of reinforcement shape and size, all with the aim of processing composite materials with desired properties
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
T1  - Fractal reconstruction of fiber-reinforced polymer composites
SP  - 49
EP  - 49
UR  - https://hdl.handle.net/21.15107/rcub_dais_11906
ER  - 

@conference{
author = "Radović, Ivana and Mitić, Vojislav V. and Stajčić, Aleksandar and Serpa, Cristina and Ribar, Srđan and Ranđelović, Branislav and Vlahović, Branislav",
year = "2021",
abstract = "Polymers offer the possibility of different reinforcement incorporation due to a broad range of chemical structures. Along with this feature, their light weight and processing ease made them a class of materials that have been applied in construction parts, drug delivery agents or electronic devices. Epoxy-based composites have used as insulators in microelectronic devices due to its chemical resistance, good adhesion properties and endurance. As epoxies have low fracture resistance, they are often reinforced with different kinds of fibers. With thorough knowledge of the structure, physical properties can be predicted and included in the processing of future composites, especially that electronic materials minituarization brought micro- and nanoscale level properties at spotlight. Fractal nature analysis is a mathematical method that has proved to be efficient in grain interface properties applied on perovskite ceramic materials. In our study, fiber shape reconstruction and determination of Hausdorff dimension have been achieved with the application of fractal regression model employed in software Fractal Real Finder opening a new path for the prediction of reinforcement shape and size, all with the aim of processing composite materials with desired properties",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021",
title = "Fractal reconstruction of fiber-reinforced polymer composites",
pages = "49-49",
url = "https://hdl.handle.net/21.15107/rcub_dais_11906"
}

Radović, I., Mitić, V. V., Stajčić, A., Serpa, C., Ribar, S., Ranđelović, B.,& Vlahović, B.. (2021). Fractal reconstruction of fiber-reinforced polymer composites. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
Belgrade : Serbian Ceramic Society., 49-49.
https://hdl.handle.net/21.15107/rcub_dais_11906

Radović I, Mitić VV, Stajčić A, Serpa C, Ribar S, Ranđelović B, Vlahović B. Fractal reconstruction of fiber-reinforced polymer composites. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021. 2021;:49-49.
https://hdl.handle.net/21.15107/rcub_dais_11906 .

Radović, Ivana, Mitić, Vojislav V., Stajčić, Aleksandar, Serpa, Cristina, Ribar, Srđan, Ranđelović, Branislav, Vlahović, Branislav, "Fractal reconstruction of fiber-reinforced polymer composites" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021 (2021):49-49,
https://hdl.handle.net/21.15107/rcub_dais_11906 .