TY  - CONF
AU  - Mirković, Miljana
AU  - Filipović, Suzana
AU  - Masković, Pavle
AU  - Pavlović, Vladimir B.
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12346
AB  - Due to the growing number of people infected with the new corona virus in the world, there is an increase in bacterial infections, which weakens the immunity. New knowledge about simple and low cost synthesis methods of materials with good structural and antimicrobial properties are of great importance nowadays. Combination of bio ceramic Hydroxyapatite material with good biocompatible characteristics and Titanium dioxide material with good degradation properties of organic molecules when combine together has ability to absorb and decompose the bacteria. Hydroxyapatite/titanium dioxide nanomaterials have been prepared by tree different synthesis route. The morphology and semi quantitative chemical analysis were characterized by scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDX). Phase and structural characterization of obtained materials were determined using X-ray powder diffraction method (XRD). The crystallite sizes of the obtained materials were evaluated in the average range from 8 nm to 15 nm. Due to phase analysis by XRD characterization the peak shows presence of anatase phase with hydroxyapatite. Based on XRD peaks positions the hexagonal hydroxyapatite phases are formed in every synthesis route with TiO2 anatase phase. The microstructural studies confirmed that the nanosized HAp coated in a different way with TiO2 depending on a synthesis route. EDX analysis confirmed presence of Ti, Ca, P, O in obtained materials. The IR spectroscopy confirmed vibrational bands characteristic for HAp and titanium with anatase phase. The investigated materials show satisfactory antimicrobial properties.
PB  - Belgrade : Innovation Center of Faculty of Mechanical Engineering
C3  - Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia
T1  - Phase morphological and antimicrobial properties of HAp-TiO2 nanomaterials obtained by different synthesis route
SP  - 14
EP  - 14
UR  - https://hdl.handle.net/21.15107/rcub_dais_12346
ER  - 

@conference{
author = "Mirković, Miljana and Filipović, Suzana and Masković, Pavle and Pavlović, Vladimir B.",
year = "2021",
abstract = "Due to the growing number of people infected with the new corona virus in the world, there is an increase in bacterial infections, which weakens the immunity. New knowledge about simple and low cost synthesis methods of materials with good structural and antimicrobial properties are of great importance nowadays. Combination of bio ceramic Hydroxyapatite material with good biocompatible characteristics and Titanium dioxide material with good degradation properties of organic molecules when combine together has ability to absorb and decompose the bacteria. Hydroxyapatite/titanium dioxide nanomaterials have been prepared by tree different synthesis route. The morphology and semi quantitative chemical analysis were characterized by scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDX). Phase and structural characterization of obtained materials were determined using X-ray powder diffraction method (XRD). The crystallite sizes of the obtained materials were evaluated in the average range from 8 nm to 15 nm. Due to phase analysis by XRD characterization the peak shows presence of anatase phase with hydroxyapatite. Based on XRD peaks positions the hexagonal hydroxyapatite phases are formed in every synthesis route with TiO2 anatase phase. The microstructural studies confirmed that the nanosized HAp coated in a different way with TiO2 depending on a synthesis route. EDX analysis confirmed presence of Ti, Ca, P, O in obtained materials. The IR spectroscopy confirmed vibrational bands characteristic for HAp and titanium with anatase phase. The investigated materials show satisfactory antimicrobial properties.",
publisher = "Belgrade : Innovation Center of Faculty of Mechanical Engineering",
journal = "Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia",
title = "Phase morphological and antimicrobial properties of HAp-TiO2 nanomaterials obtained by different synthesis route",
pages = "14-14",
url = "https://hdl.handle.net/21.15107/rcub_dais_12346"
}

Mirković, M., Filipović, S., Masković, P.,& Pavlović, V. B.. (2021). Phase morphological and antimicrobial properties of HAp-TiO2 nanomaterials obtained by different synthesis route. in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia
Belgrade : Innovation Center of Faculty of Mechanical Engineering., 14-14.
https://hdl.handle.net/21.15107/rcub_dais_12346

Mirković M, Filipović S, Masković P, Pavlović VB. Phase morphological and antimicrobial properties of HAp-TiO2 nanomaterials obtained by different synthesis route. in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia. 2021;:14-14.
https://hdl.handle.net/21.15107/rcub_dais_12346 .

Mirković, Miljana, Filipović, Suzana, Masković, Pavle, Pavlović, Vladimir B., "Phase morphological and antimicrobial properties of HAp-TiO2 nanomaterials obtained by different synthesis route" in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia (2021):14-14,
https://hdl.handle.net/21.15107/rcub_dais_12346 .

TY  - CONF
AU  - Sknepnek, Aleksandra
AU  - Filipović, Suzana
AU  - Masković, Pavle
AU  - Mirković, Miljana
AU  - Miletić, Dunja
AU  - Nikšić, Miomir
AU  - Pavlović, Vladimir B.
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12348
AB  - Cellulose, as the main constituent of plants, is the most common natural material that is widely used. Bacterial cellulose (BC) is a polymer of β-1,4-glucan chains, extracellularly attached to bacterial cells. It possesses the same structure as plant cellulose but its application has many advantages. BC has tinner threads, better crystallinity, mechanical strength and higher purity. By the means of micro- and nano-pores in the structure, it is possible to retain nano particles and enhance the application of obtained nanostructures. BC lacks antibacterial and antioxidative activity, conductivity and magnetic properties, which lowers the possibility of its application in biomedicine and electronics. To overcome previously mentioned deficiency, it is possible to apply bioactive polymers, nanomaterials or solid particles into the structure. High biocidal potential of TiO2 originates from its photocatalytic properties, and the generation of reactive oxygen species (ROS). At the first site of action, they cause cell membrane damage and afterwards, they attack intracellular components causing cell death. Hydroxyapatite (HAp) is capable to act synergistically with TiO2 and to accelerate its efficiency. Having in mind all characteristics of previously mentioned components, we have investigated the structure, morphology, mechanical properties and antimicrobial activity of advanced ceramics/polymer films. The influence of synthesis duration on BC structure, produced by Komagataeibacter xylinus species, was investigated. Thereafter, the possibility of TiO2/HAp ceramic nanocomposite application in BC was examined. The developed structures were analyzed by SEM and EDS analyzes, as well as XRD and FTIR spectroscopy. Mechanical properties were investigated as well.
PB  - Belgrade : Innovation Center of Faculty of Mechanical Engineering
C3  - Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia
T1  - Effects of synthesis parameters on structure and properties of the ceramic/polymer films based on bacterial cellulose
SP  - 78
EP  - 78
UR  - https://hdl.handle.net/21.15107/rcub_dais_12348
ER  - 

@conference{
author = "Sknepnek, Aleksandra and Filipović, Suzana and Masković, Pavle and Mirković, Miljana and Miletić, Dunja and Nikšić, Miomir and Pavlović, Vladimir B.",
year = "2021",
abstract = "Cellulose, as the main constituent of plants, is the most common natural material that is widely used. Bacterial cellulose (BC) is a polymer of β-1,4-glucan chains, extracellularly attached to bacterial cells. It possesses the same structure as plant cellulose but its application has many advantages. BC has tinner threads, better crystallinity, mechanical strength and higher purity. By the means of micro- and nano-pores in the structure, it is possible to retain nano particles and enhance the application of obtained nanostructures. BC lacks antibacterial and antioxidative activity, conductivity and magnetic properties, which lowers the possibility of its application in biomedicine and electronics. To overcome previously mentioned deficiency, it is possible to apply bioactive polymers, nanomaterials or solid particles into the structure. High biocidal potential of TiO2 originates from its photocatalytic properties, and the generation of reactive oxygen species (ROS). At the first site of action, they cause cell membrane damage and afterwards, they attack intracellular components causing cell death. Hydroxyapatite (HAp) is capable to act synergistically with TiO2 and to accelerate its efficiency. Having in mind all characteristics of previously mentioned components, we have investigated the structure, morphology, mechanical properties and antimicrobial activity of advanced ceramics/polymer films. The influence of synthesis duration on BC structure, produced by Komagataeibacter xylinus species, was investigated. Thereafter, the possibility of TiO2/HAp ceramic nanocomposite application in BC was examined. The developed structures were analyzed by SEM and EDS analyzes, as well as XRD and FTIR spectroscopy. Mechanical properties were investigated as well.",
publisher = "Belgrade : Innovation Center of Faculty of Mechanical Engineering",
journal = "Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia",
title = "Effects of synthesis parameters on structure and properties of the ceramic/polymer films based on bacterial cellulose",
pages = "78-78",
url = "https://hdl.handle.net/21.15107/rcub_dais_12348"
}

Sknepnek, A., Filipović, S., Masković, P., Mirković, M., Miletić, D., Nikšić, M.,& Pavlović, V. B.. (2021). Effects of synthesis parameters on structure and properties of the ceramic/polymer films based on bacterial cellulose. in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia
Belgrade : Innovation Center of Faculty of Mechanical Engineering., 78-78.
https://hdl.handle.net/21.15107/rcub_dais_12348

Sknepnek A, Filipović S, Masković P, Mirković M, Miletić D, Nikšić M, Pavlović VB. Effects of synthesis parameters on structure and properties of the ceramic/polymer films based on bacterial cellulose. in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia. 2021;:78-78.
https://hdl.handle.net/21.15107/rcub_dais_12348 .

Sknepnek, Aleksandra, Filipović, Suzana, Masković, Pavle, Mirković, Miljana, Miletić, Dunja, Nikšić, Miomir, Pavlović, Vladimir B., "Effects of synthesis parameters on structure and properties of the ceramic/polymer films based on bacterial cellulose" in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia (2021):78-78,
https://hdl.handle.net/21.15107/rcub_dais_12348 .