TY  - JOUR
AU  - Jambrec, Daliborka
AU  - Gvozdenović, Milica M.
AU  - Antov, Mirjana
AU  - Grgur, Branimir
AU  - Jokić, Bojan
AU  - Stevanović, Jasmina S.
AU  - Jugović, Branimir
PY  - 2012
UR  - https://dais.sanu.ac.rs/123456789/469
AB  - Electrochemical deposition of polyaniline (PANI) on graphite electrode was performed galvanostaticaly at constant current density in the range of 1.0 – 5.0 mA cm-2 from aqueous acidic electrolyte containing aniline monomer. Based on ratio of doping/dedoping
charge capacities, it was estimated that current density of 2.0 mA cm-2 was optimal. The structure of the electrochemically synthesized PANI was fibrous, uniform and three dimensional with highly developed surface. Immobilization of glucose oxidise (GOx) was achieved by cross linking via glutaraldehyde and the efficiency of the immobilization was determined spectrophotometrically. Chronoamperometric curves were recorded at different glucose concentrations and used to estimate the apparent Michaelis constant, which was shown to be 0.27 mM. The storage stability of the PANI enzyme electrode was also estimated.
PB  - Bucharest : National Institute of Materials Physics
T2  - Digest journal of nanomaterials and biostructures
T1  - Electrochemically deposited nano fibrous polyanilne for amperometric determination of glucose
SP  - 785
EP  - 794
UR  - https://hdl.handle.net/21.15107/rcub_dais_469
ER  - 

@article{
author = "Jambrec, Daliborka and Gvozdenović, Milica M. and Antov, Mirjana and Grgur, Branimir and Jokić, Bojan and Stevanović, Jasmina S. and Jugović, Branimir",
year = "2012",
abstract = "Electrochemical deposition of polyaniline (PANI) on graphite electrode was performed galvanostaticaly at constant current density in the range of 1.0 – 5.0 mA cm-2 from aqueous acidic electrolyte containing aniline monomer. Based on ratio of doping/dedoping
charge capacities, it was estimated that current density of 2.0 mA cm-2 was optimal. The structure of the electrochemically synthesized PANI was fibrous, uniform and three dimensional with highly developed surface. Immobilization of glucose oxidise (GOx) was achieved by cross linking via glutaraldehyde and the efficiency of the immobilization was determined spectrophotometrically. Chronoamperometric curves were recorded at different glucose concentrations and used to estimate the apparent Michaelis constant, which was shown to be 0.27 mM. The storage stability of the PANI enzyme electrode was also estimated.",
publisher = "Bucharest : National Institute of Materials Physics",
journal = "Digest journal of nanomaterials and biostructures",
title = "Electrochemically deposited nano fibrous polyanilne for amperometric determination of glucose",
pages = "785-794",
url = "https://hdl.handle.net/21.15107/rcub_dais_469"
}

Jambrec, D., Gvozdenović, M. M., Antov, M., Grgur, B., Jokić, B., Stevanović, J. S.,& Jugović, B.. (2012). Electrochemically deposited nano fibrous polyanilne for amperometric determination of glucose. in Digest journal of nanomaterials and biostructures
Bucharest : National Institute of Materials Physics., 785-794.
https://hdl.handle.net/21.15107/rcub_dais_469

Jambrec D, Gvozdenović MM, Antov M, Grgur B, Jokić B, Stevanović JS, Jugović B. Electrochemically deposited nano fibrous polyanilne for amperometric determination of glucose. in Digest journal of nanomaterials and biostructures. 2012;:785-794.
https://hdl.handle.net/21.15107/rcub_dais_469 .

Jambrec, Daliborka, Gvozdenović, Milica M., Antov, Mirjana, Grgur, Branimir, Jokić, Bojan, Stevanović, Jasmina S., Jugović, Branimir, "Electrochemically deposited nano fibrous polyanilne for amperometric determination of glucose" in Digest journal of nanomaterials and biostructures (2012):785-794,
https://hdl.handle.net/21.15107/rcub_dais_469 .

TY  - CONF
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Jambrec, Daliborka
AU  - Grgur, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina S.
PY  - 2012
UR  - https://dais.sanu.ac.rs/123456789/141
AB  - Poster presented at the 39th International Conference of Slovak Society of Chemical Engineering, Tatranske Matliare, Slovakia, May 21–25, 2012
T1  - The influence of current density on charge/discharge characteristics of polyaniline electrode
UR  - https://hdl.handle.net/21.15107/rcub_dais_141
ER  - 

@conference{
author = "Gvozdenović, Milica M. and Jugović, Branimir and Jambrec, Daliborka and Grgur, Branimir and Trišović, Tomislav and Stevanović, Jasmina S.",
year = "2012",
abstract = "Poster presented at the 39th International Conference of Slovak Society of Chemical Engineering, Tatranske Matliare, Slovakia, May 21–25, 2012",
title = "The influence of current density on charge/discharge characteristics of polyaniline electrode",
url = "https://hdl.handle.net/21.15107/rcub_dais_141"
}

Gvozdenović, M. M., Jugović, B., Jambrec, D., Grgur, B., Trišović, T.,& Stevanović, J. S.. (2012). The influence of current density on charge/discharge characteristics of polyaniline electrode. .
https://hdl.handle.net/21.15107/rcub_dais_141

Gvozdenović MM, Jugović B, Jambrec D, Grgur B, Trišović T, Stevanović JS. The influence of current density on charge/discharge characteristics of polyaniline electrode. 2012;.
https://hdl.handle.net/21.15107/rcub_dais_141 .

Gvozdenović, Milica M., Jugović, Branimir, Jambrec, Daliborka, Grgur, Branimir, Trišović, Tomislav, Stevanović, Jasmina S., "The influence of current density on charge/discharge characteristics of polyaniline electrode" (2012),
https://hdl.handle.net/21.15107/rcub_dais_141 .

TY  - CONF
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Jambrec, Daliborka
AU  - Grgur, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina S.
PY  - 2012
UR  - https://dais.sanu.ac.rs/123456789/492
AB  - Polyaniline (PANI) was electrochemically synthesized on graphite electrode galvanostaticaly from aqueous solution of 0.25 mol dm-3 aniline and 0.5 mol dm-3 p-toluenesulfonic acid. Charge capacity available for the exchange and the total theoretical weight of polyaniline polymerized on graphite electrode was determined. Characterization polianiline electrode was performed by cyclic voltametry in 0.5 mol dm-3 HCl. Based on the PANI electrodes behavior during the cyclization, was tested the possibility of practical application of polyaniline doped p-toluenesulfonic acid as the anode material of secondary electrochemical power sources.
PB  - Tatranské Matliare : Slovak Society of Chemical Engineering
C3  - Proceedings of the 39th International Conference of Slovak Society of Chemical Engineering
T1  - The influence of current density on charge/discharge characteristics of polyaniline electrode
SP  - 1467
EP  - 1471
UR  - https://hdl.handle.net/21.15107/rcub_dais_492
ER  - 

@conference{
author = "Gvozdenović, Milica M. and Jugović, Branimir and Jambrec, Daliborka and Grgur, Branimir and Trišović, Tomislav and Stevanović, Jasmina S.",
year = "2012",
abstract = "Polyaniline (PANI) was electrochemically synthesized on graphite electrode galvanostaticaly from aqueous solution of 0.25 mol dm-3 aniline and 0.5 mol dm-3 p-toluenesulfonic acid. Charge capacity available for the exchange and the total theoretical weight of polyaniline polymerized on graphite electrode was determined. Characterization polianiline electrode was performed by cyclic voltametry in 0.5 mol dm-3 HCl. Based on the PANI electrodes behavior during the cyclization, was tested the possibility of practical application of polyaniline doped p-toluenesulfonic acid as the anode material of secondary electrochemical power sources.",
publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering",
journal = "Proceedings of the 39th International Conference of Slovak Society of Chemical Engineering",
title = "The influence of current density on charge/discharge characteristics of polyaniline electrode",
pages = "1467-1471",
url = "https://hdl.handle.net/21.15107/rcub_dais_492"
}

Gvozdenović, M. M., Jugović, B., Jambrec, D., Grgur, B., Trišović, T.,& Stevanović, J. S.. (2012). The influence of current density on charge/discharge characteristics of polyaniline electrode. in Proceedings of the 39th International Conference of Slovak Society of Chemical Engineering
Tatranské Matliare : Slovak Society of Chemical Engineering., 1467-1471.
https://hdl.handle.net/21.15107/rcub_dais_492

Gvozdenović MM, Jugović B, Jambrec D, Grgur B, Trišović T, Stevanović JS. The influence of current density on charge/discharge characteristics of polyaniline electrode. in Proceedings of the 39th International Conference of Slovak Society of Chemical Engineering. 2012;:1467-1471.
https://hdl.handle.net/21.15107/rcub_dais_492 .

Gvozdenović, Milica M., Jugović, Branimir, Jambrec, Daliborka, Grgur, Branimir, Trišović, Tomislav, Stevanović, Jasmina S., "The influence of current density on charge/discharge characteristics of polyaniline electrode" in Proceedings of the 39th International Conference of Slovak Society of Chemical Engineering (2012):1467-1471,
https://hdl.handle.net/21.15107/rcub_dais_492 .

TY  - JOUR
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Jambrec, Daliborka
AU  - Stevanović, Jasmina S.
AU  - Grgur, Branimir
PY  - 2012
UR  - https://dais.sanu.ac.rs/123456789/467
AB  - Polianilin je najproučavaniji elektroprovodni polimer. Ova popularnost polianilina je posledica jedinstvenih svojstava, delom nasleđenih od polimerne prirode, a delom ostvarenih provodljivošću. Najvažnija svojstva polianilina: postojanje više oksidacionih stanja, elektronska provodljivost, optička aktivnost, postojanost u spoljašnjoj sredini, mogućnost hemijske i elektrohemisjke sinteze i niska cena monomera nalaze primenu u mnogim oblstima: elektrohemisjkim sistemima za skladištenje i proizvodnju električne energije, elektronici, za izradu sensorskhih i biosenzorskih elektroda, za izradu antistatičkih i materijala mikrotalasnih i magnetnih štitova i u zaštiti metala i legura od korozije. Primena polianilina u zaštiti od korozije je prvenstveno motivisana potrebom zamene toksičnih materijala iz sistema prevlaka. Postoji dosta literaturnih podataka iz ove oblasti. Ipak, imajući u vidu raznovrsnost metala i legura, korozionih sredina, postupaka pripreme materijala, nanošenja prevlaka i vrsta prevlaka, kao i eksperimentalnih procedura i observacija, praktično je nemoguće uspostaviti jedinstven mehanizam antikorozione zaštite metala u prisustvu polianilina. Najcitiraniji i najpopularniji mehanizmi koji se mogu naći u literaturi obuhvataju barijerni mehanizam i mehanizam anodne zaštite.
AB  - Polyaniline is probably the most investigated electroconducting polymer. This popularity is a result of its important features: existence of various oxidation states, electrical and optical activity, low cost monomer, red/ox reversibility, environmental stability, ease of both chemical and electrochemical synthesis etc. These unique features are partly inherited from its polymeric origin and partly aroused from its conductivity and could be considered for practical application in: electrochemical systems for energy storage and conversion, electronic devices, electromagnetic and microwave shielding materials, sensors, biosensors and corrosion protection as well. The motivation of application of polyaniline in corrosion protection of metals and alloys is replacement of environmentally hazardous materials, e.g. chromates in coating systems. Up to day, lot of studies on various metals both on iron, steels and non-ferrous metals and alloys were performed. The studies involve investigation on individual polyaniline coatings and polyaniline in coating systems. Owing to variation in experimental procedure (substrate, substrate preparation, coating type, corrosion environment, test method etc..) it is unlikely to propose unique mechanism for corrosion protection of metals in the presence of polyaniline. However, most of the literature is interpreted in terms of general mechanisms of corrosion protection, barrier and anodic protection.
PB  - Beograd : Inženjersko društvo za koroziju
T2  - Zaštita materijala
T1  - Primena polianilina u zaštiti metala od korozije
SP  - 353
EP  - 360
UR  - https://hdl.handle.net/21.15107/rcub_dais_467
ER  - 

@article{
author = "Gvozdenović, Milica M. and Jugović, Branimir and Jambrec, Daliborka and Stevanović, Jasmina S. and Grgur, Branimir",
year = "2012",
abstract = "Polianilin je najproučavaniji elektroprovodni polimer. Ova popularnost polianilina je posledica jedinstvenih svojstava, delom nasleđenih od polimerne prirode, a delom ostvarenih provodljivošću. Najvažnija svojstva polianilina: postojanje više oksidacionih stanja, elektronska provodljivost, optička aktivnost, postojanost u spoljašnjoj sredini, mogućnost hemijske i elektrohemisjke sinteze i niska cena monomera nalaze primenu u mnogim oblstima: elektrohemisjkim sistemima za skladištenje i proizvodnju električne energije, elektronici, za izradu sensorskhih i biosenzorskih elektroda, za izradu antistatičkih i materijala mikrotalasnih i magnetnih štitova i u zaštiti metala i legura od korozije. Primena polianilina u zaštiti od korozije je prvenstveno motivisana potrebom zamene toksičnih materijala iz sistema prevlaka. Postoji dosta literaturnih podataka iz ove oblasti. Ipak, imajući u vidu raznovrsnost metala i legura, korozionih sredina, postupaka pripreme materijala, nanošenja prevlaka i vrsta prevlaka, kao i eksperimentalnih procedura i observacija, praktično je nemoguće uspostaviti jedinstven mehanizam antikorozione zaštite metala u prisustvu polianilina. Najcitiraniji i najpopularniji mehanizmi koji se mogu naći u literaturi obuhvataju barijerni mehanizam i mehanizam anodne zaštite., Polyaniline is probably the most investigated electroconducting polymer. This popularity is a result of its important features: existence of various oxidation states, electrical and optical activity, low cost monomer, red/ox reversibility, environmental stability, ease of both chemical and electrochemical synthesis etc. These unique features are partly inherited from its polymeric origin and partly aroused from its conductivity and could be considered for practical application in: electrochemical systems for energy storage and conversion, electronic devices, electromagnetic and microwave shielding materials, sensors, biosensors and corrosion protection as well. The motivation of application of polyaniline in corrosion protection of metals and alloys is replacement of environmentally hazardous materials, e.g. chromates in coating systems. Up to day, lot of studies on various metals both on iron, steels and non-ferrous metals and alloys were performed. The studies involve investigation on individual polyaniline coatings and polyaniline in coating systems. Owing to variation in experimental procedure (substrate, substrate preparation, coating type, corrosion environment, test method etc..) it is unlikely to propose unique mechanism for corrosion protection of metals in the presence of polyaniline. However, most of the literature is interpreted in terms of general mechanisms of corrosion protection, barrier and anodic protection.",
publisher = "Beograd : Inženjersko društvo za koroziju",
journal = "Zaštita materijala",
title = "Primena polianilina u zaštiti metala od korozije",
pages = "353-360",
url = "https://hdl.handle.net/21.15107/rcub_dais_467"
}

Gvozdenović, M. M., Jugović, B., Jambrec, D., Stevanović, J. S.,& Grgur, B.. (2012). Primena polianilina u zaštiti metala od korozije. in Zaštita materijala
Beograd : Inženjersko društvo za koroziju., 353-360.
https://hdl.handle.net/21.15107/rcub_dais_467

Gvozdenović MM, Jugović B, Jambrec D, Stevanović JS, Grgur B. Primena polianilina u zaštiti metala od korozije. in Zaštita materijala. 2012;:353-360.
https://hdl.handle.net/21.15107/rcub_dais_467 .

Gvozdenović, Milica M., Jugović, Branimir, Jambrec, Daliborka, Stevanović, Jasmina S., Grgur, Branimir, "Primena polianilina u zaštiti metala od korozije" in Zaštita materijala (2012):353-360,
https://hdl.handle.net/21.15107/rcub_dais_467 .

TY  - CONF
AU  - Jambrec, Daliborka
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Knežević Jugović, Zorica
AU  - Antov, Mirjana
PY  - 2011
UR  - https://dais.sanu.ac.rs/123456789/694
AB  - A growing interest in biosensors for use in medical, environmental and food analysis
has been recognized. Biosensors are devices that transform chemical information, usually the concentration of a specific sample component, into an analytically useful signal. Their selectivity depends on the characteristics of enzyme and biosensors’ response rate and sensitivity on electroconducting polymer used. Glucose oxidase (GOx) is the most widely used enzyme in the field of biosensors because of its high specificity for a commercially important analyte, high turnover number and high stability. On the other side, among the conducting polyheterocyclic polymers, polypyrolle (PPy) is of particular interest because the relatively low oxidation potential of the monomer enables films to be grown from aqueous solutions that are compatible with most of biological elements. The aim of this study was to investigate the possibility of glucose determination using enzyme electrode obtained by immobilization of GOx into polypyrolle electrochemically polymerised on platinum electrode. Electrochemical synthesis was performed in 0.5 mol dm-3 HCl and 0.2 mol dm-3 pyrolle at constant current density of 2 mA cm-2. Polypyrolle/enzyme electrode was formed by immobilization of glucose oxidase via glutaraldehyde into electrochemically synthesized polypyrolle on platinum electrode. Apparent Michaelis constant was determined and it was found to be 0.045 mmol dm-3, which is much lower than that of free enzyme indicating enhanced enzyme efficiency when it is immobilized into polymer electroconducting matrix. PPy/enzyme electrode lost 5% and 18% of its initial signal after 5 and 20 days, respectively.
PB  - Tatranské Matliare : Slovak Society of Chemical Engineering
C3  - Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering
T1  - Polypyrolle/glucose oxidase electrode for electrochemical determination of glucose
SP  - 1310
EP  - 1310
UR  - https://hdl.handle.net/21.15107/rcub_dais_694
ER  - 

@conference{
author = "Jambrec, Daliborka and Jugović, Branimir and Gvozdenović, Milica M. and Knežević Jugović, Zorica and Antov, Mirjana",
year = "2011",
abstract = "A growing interest in biosensors for use in medical, environmental and food analysis
has been recognized. Biosensors are devices that transform chemical information, usually the concentration of a specific sample component, into an analytically useful signal. Their selectivity depends on the characteristics of enzyme and biosensors’ response rate and sensitivity on electroconducting polymer used. Glucose oxidase (GOx) is the most widely used enzyme in the field of biosensors because of its high specificity for a commercially important analyte, high turnover number and high stability. On the other side, among the conducting polyheterocyclic polymers, polypyrolle (PPy) is of particular interest because the relatively low oxidation potential of the monomer enables films to be grown from aqueous solutions that are compatible with most of biological elements. The aim of this study was to investigate the possibility of glucose determination using enzyme electrode obtained by immobilization of GOx into polypyrolle electrochemically polymerised on platinum electrode. Electrochemical synthesis was performed in 0.5 mol dm-3 HCl and 0.2 mol dm-3 pyrolle at constant current density of 2 mA cm-2. Polypyrolle/enzyme electrode was formed by immobilization of glucose oxidase via glutaraldehyde into electrochemically synthesized polypyrolle on platinum electrode. Apparent Michaelis constant was determined and it was found to be 0.045 mmol dm-3, which is much lower than that of free enzyme indicating enhanced enzyme efficiency when it is immobilized into polymer electroconducting matrix. PPy/enzyme electrode lost 5% and 18% of its initial signal after 5 and 20 days, respectively.",
publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering",
journal = "Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering",
title = "Polypyrolle/glucose oxidase electrode for electrochemical determination of glucose",
pages = "1310-1310",
url = "https://hdl.handle.net/21.15107/rcub_dais_694"
}

Jambrec, D., Jugović, B., Gvozdenović, M. M., Knežević Jugović, Z.,& Antov, M.. (2011). Polypyrolle/glucose oxidase electrode for electrochemical determination of glucose. in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering
Tatranské Matliare : Slovak Society of Chemical Engineering., 1310-1310.
https://hdl.handle.net/21.15107/rcub_dais_694

Jambrec D, Jugović B, Gvozdenović MM, Knežević Jugović Z, Antov M. Polypyrolle/glucose oxidase electrode for electrochemical determination of glucose. in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering. 2011;:1310-1310.
https://hdl.handle.net/21.15107/rcub_dais_694 .

Jambrec, Daliborka, Jugović, Branimir, Gvozdenović, Milica M., Knežević Jugović, Zorica, Antov, Mirjana, "Polypyrolle/glucose oxidase electrode for electrochemical determination of glucose" in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering (2011):1310-1310,
https://hdl.handle.net/21.15107/rcub_dais_694 .

TY  - CONF
AU  - Jambrec, Daliborka
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Knežević Jugović, Zorica
AU  - Antov, Mirjana
PY  - 2011
UR  - https://dais.sanu.ac.rs/123456789/147
AB  - Poster presented at the 38th International Conference of SSCHE, Tatranske Matliare, Slovakia, May 23–27, 2011
T1  - Polypyrolle/glucose oxidase electrode for electrochemical determination of glucose
UR  - https://hdl.handle.net/21.15107/rcub_dais_147
ER  - 

@conference{
author = "Jambrec, Daliborka and Jugović, Branimir and Gvozdenović, Milica M. and Knežević Jugović, Zorica and Antov, Mirjana",
year = "2011",
abstract = "Poster presented at the 38th International Conference of SSCHE, Tatranske Matliare, Slovakia, May 23–27, 2011",
title = "Polypyrolle/glucose oxidase electrode for electrochemical determination of glucose",
url = "https://hdl.handle.net/21.15107/rcub_dais_147"
}

Jambrec, D., Jugović, B., Gvozdenović, M. M., Knežević Jugović, Z.,& Antov, M.. (2011). Polypyrolle/glucose oxidase electrode for electrochemical determination of glucose. .
https://hdl.handle.net/21.15107/rcub_dais_147

Jambrec D, Jugović B, Gvozdenović MM, Knežević Jugović Z, Antov M. Polypyrolle/glucose oxidase electrode for electrochemical determination of glucose. 2011;.
https://hdl.handle.net/21.15107/rcub_dais_147 .

Jambrec, Daliborka, Jugović, Branimir, Gvozdenović, Milica M., Knežević Jugović, Zorica, Antov, Mirjana, "Polypyrolle/glucose oxidase electrode for electrochemical determination of glucose" (2011),
https://hdl.handle.net/21.15107/rcub_dais_147 .

TY  - CONF
AU  - Jambrec, Daliborka
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
PY  - 2011
UR  - https://dais.sanu.ac.rs/123456789/693
AB  - Sensor electrode was formed by immobilization of glucose oxidase (GOx) on polyaniline (PANI), electrochemically synthesized on graphite electrode from aqueous hydrochloride acid electrolyte containing aniline monomer by galvanostatic method. Optimization of the current density used for the synthesis of PANI was performed. Immobilization of GOx was achieved by crosslinking via glutaraldehyde and the efficiency of the immobilization was determined spectrophotometrically. Using chronoamperometric curves of glucose oxidation on polyaniline apparent Michaelis constant was estimated to be 0.273 mM. The storage stability of the enzyme electrode was examined for twenty days, after which it retained 84% of its initial signal.
PB  - Belgrade : Institute of Technical Sciences of the Serbian Academy of Sciences and Arts
C3  - Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia
T1  - Determination of glucose using polyaniline modified electrode
SP  - 24
EP  - 24
UR  - https://hdl.handle.net/21.15107/rcub_dais_693
ER  - 

@conference{
author = "Jambrec, Daliborka and Gvozdenović, Milica M. and Jugović, Branimir",
year = "2011",
abstract = "Sensor electrode was formed by immobilization of glucose oxidase (GOx) on polyaniline (PANI), electrochemically synthesized on graphite electrode from aqueous hydrochloride acid electrolyte containing aniline monomer by galvanostatic method. Optimization of the current density used for the synthesis of PANI was performed. Immobilization of GOx was achieved by crosslinking via glutaraldehyde and the efficiency of the immobilization was determined spectrophotometrically. Using chronoamperometric curves of glucose oxidation on polyaniline apparent Michaelis constant was estimated to be 0.273 mM. The storage stability of the enzyme electrode was examined for twenty days, after which it retained 84% of its initial signal.",
publisher = "Belgrade : Institute of Technical Sciences of the Serbian Academy of Sciences and Arts",
journal = "Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia",
title = "Determination of glucose using polyaniline modified electrode",
pages = "24-24",
url = "https://hdl.handle.net/21.15107/rcub_dais_693"
}

Jambrec, D., Gvozdenović, M. M.,& Jugović, B.. (2011). Determination of glucose using polyaniline modified electrode. in Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of the Serbian Academy of Sciences and Arts., 24-24.
https://hdl.handle.net/21.15107/rcub_dais_693

Jambrec D, Gvozdenović MM, Jugović B. Determination of glucose using polyaniline modified electrode. in Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia. 2011;:24-24.
https://hdl.handle.net/21.15107/rcub_dais_693 .

Jambrec, Daliborka, Gvozdenović, Milica M., Jugović, Branimir, "Determination of glucose using polyaniline modified electrode" in Program and the Book of Abstracts / Tenth Young Researchers' Conference Materials Science and Engineering, December 21-23, 2011, Belgrade, Serbia (2011):24-24,
https://hdl.handle.net/21.15107/rcub_dais_693 .