TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Corlett, Cole
AU  - Fahrenholtz, William G.
AU  - Rosenschon, Martin
AU  - Füglein, Ekkehard
AU  - Dojčilović, Radovan
AU  - Tošić, Dragana
AU  - Petrović, Jovana
AU  - Đorđević, Antonije
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/16516
AB  - Ceramic/polymer composites can be chemically stable, mechanically strong, and flexible, which make them candidates for electric devices, such as pressure or temperature sensors, energy storage or harvesting devices, actuators, and so forth. Depending on the application, various electrical properties are of importance. Polymers usually have low dielectric permittivity, but increased dielectric permittivity can be achieved by the addition of the ceramic fillers with high dielectric constant. With the aim to enhance dielectric properties of the composite without loss of flexibility, 5 wt% of BaTiO3-Fe2O3 powder was added into a polyvinylidene fluoride matrix. The powder was prepared by different synthesis conditions to produce core/shell structures. The effect of the phase composition and morphology of the BaTiO3-Fe2O3 core/shell filler on the structure and lattice dynamics of the polymer composites was investigated. Based on the results of the thermal analysis, various parameters of ceramic/polymer composites were determined. Differences in the phase composition and morphology of the filler have an influence on the formation of various polyvinylidene fluoride allomorphs and the degree of crystallinity. Furthermore, the dielectric performances of pure polyvinylidene fluoride and the polymer/ceramic composites were measured.
PB  - Wiley
T2  - Journal of Applied Polymer Science
T1  - Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite
SP  - e55040
VL  - 141
IS  - 10
DO  - 10.1002/app.55040
UR  - https://hdl.handle.net/21.15107/rcub_dais_16516
ER  - 

@article{
author = "Filipović, Suzana and Obradović, Nina and Corlett, Cole and Fahrenholtz, William G. and Rosenschon, Martin and Füglein, Ekkehard and Dojčilović, Radovan and Tošić, Dragana and Petrović, Jovana and Đorđević, Antonije and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2024",
abstract = "Ceramic/polymer composites can be chemically stable, mechanically strong, and flexible, which make them candidates for electric devices, such as pressure or temperature sensors, energy storage or harvesting devices, actuators, and so forth. Depending on the application, various electrical properties are of importance. Polymers usually have low dielectric permittivity, but increased dielectric permittivity can be achieved by the addition of the ceramic fillers with high dielectric constant. With the aim to enhance dielectric properties of the composite without loss of flexibility, 5 wt% of BaTiO3-Fe2O3 powder was added into a polyvinylidene fluoride matrix. The powder was prepared by different synthesis conditions to produce core/shell structures. The effect of the phase composition and morphology of the BaTiO3-Fe2O3 core/shell filler on the structure and lattice dynamics of the polymer composites was investigated. Based on the results of the thermal analysis, various parameters of ceramic/polymer composites were determined. Differences in the phase composition and morphology of the filler have an influence on the formation of various polyvinylidene fluoride allomorphs and the degree of crystallinity. Furthermore, the dielectric performances of pure polyvinylidene fluoride and the polymer/ceramic composites were measured.",
publisher = "Wiley",
journal = "Journal of Applied Polymer Science",
title = "Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite",
pages = "e55040",
volume = "141",
number = "10",
doi = "10.1002/app.55040",
url = "https://hdl.handle.net/21.15107/rcub_dais_16516"
}

Filipović, S., Obradović, N., Corlett, C., Fahrenholtz, W. G., Rosenschon, M., Füglein, E., Dojčilović, R., Tošić, D., Petrović, J., Đorđević, A., Vlahović, B.,& Pavlović, V. B.. (2024). Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite. in Journal of Applied Polymer Science
Wiley., 141(10), e55040.
https://doi.org/10.1002/app.55040
https://hdl.handle.net/21.15107/rcub_dais_16516

Filipović S, Obradović N, Corlett C, Fahrenholtz WG, Rosenschon M, Füglein E, Dojčilović R, Tošić D, Petrović J, Đorđević A, Vlahović B, Pavlović VB. Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite. in Journal of Applied Polymer Science. 2024;141(10):e55040.
doi:10.1002/app.55040
https://hdl.handle.net/21.15107/rcub_dais_16516 .

Filipović, Suzana, Obradović, Nina, Corlett, Cole, Fahrenholtz, William G., Rosenschon, Martin, Füglein, Ekkehard, Dojčilović, Radovan, Tošić, Dragana, Petrović, Jovana, Đorđević, Antonije, Vlahović, Branislav, Pavlović, Vladimir B., "Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite" in Journal of Applied Polymer Science, 141, no. 10 (2024):e55040,
https://doi.org/10.1002/app.55040 .,
https://hdl.handle.net/21.15107/rcub_dais_16516 .

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Corlett, Cole
AU  - Fahrenholtz, William G.
AU  - Rosenschon, Martin
AU  - Füglein, Ekkehard
AU  - Dojčilović, Radovan
AU  - Tošić, Dragana
AU  - Petrović, Jovana
AU  - Đorđević, Antonije
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/16243
AB  - Ceramic/polymer composites can be chemically stable, mechanically strong, and flexible, which make them candidates for electric devices, such as pressure or temperature sensors, energy storage or harvesting devices, actuators, and so forth. Depending on the application, various electrical properties are of importance. Polymers usually have low dielectric permittivity, but increased dielectric permittivity can be achieved by the addition of the ceramic fillers with high dielectric constant. With the aim to enhance dielectric properties of the composite without loss of flexibility, 5 wt% of BaTiO3-Fe2O3 powder was added into a polyvinylidene fluoride matrix. The powder was prepared by different synthesis conditions to produce core/shell structures. The effect of the phase composition and morphology of the BaTiO3-Fe2O3 core/shell filler on the structure and lattice dynamics of the polymer composites was investigated. Based on the results of the thermal analysis, various parameters of ceramic/polymer composites were determined. Differences in the phase composition and morphology of the filler have an influence on the formation of various polyvinylidene fluoride allomorphs and the degree of crystallinity. Furthermore, the dielectric performances of pure polyvinylidene fluoride and the polymer/ceramic composites were measured.
PB  - Wiley
T2  - Journal of Applied Polymer Science
T1  - Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite
SP  - e55040
VL  - 141
IS  - 10
DO  - 10.1002/app.55040
UR  - https://hdl.handle.net/21.15107/rcub_dais_16516
ER  - 

@article{
author = "Filipović, Suzana and Obradović, Nina and Corlett, Cole and Fahrenholtz, William G. and Rosenschon, Martin and Füglein, Ekkehard and Dojčilović, Radovan and Tošić, Dragana and Petrović, Jovana and Đorđević, Antonije and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2024",
abstract = "Ceramic/polymer composites can be chemically stable, mechanically strong, and flexible, which make them candidates for electric devices, such as pressure or temperature sensors, energy storage or harvesting devices, actuators, and so forth. Depending on the application, various electrical properties are of importance. Polymers usually have low dielectric permittivity, but increased dielectric permittivity can be achieved by the addition of the ceramic fillers with high dielectric constant. With the aim to enhance dielectric properties of the composite without loss of flexibility, 5 wt% of BaTiO3-Fe2O3 powder was added into a polyvinylidene fluoride matrix. The powder was prepared by different synthesis conditions to produce core/shell structures. The effect of the phase composition and morphology of the BaTiO3-Fe2O3 core/shell filler on the structure and lattice dynamics of the polymer composites was investigated. Based on the results of the thermal analysis, various parameters of ceramic/polymer composites were determined. Differences in the phase composition and morphology of the filler have an influence on the formation of various polyvinylidene fluoride allomorphs and the degree of crystallinity. Furthermore, the dielectric performances of pure polyvinylidene fluoride and the polymer/ceramic composites were measured.",
publisher = "Wiley",
journal = "Journal of Applied Polymer Science",
title = "Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite",
pages = "e55040",
volume = "141",
number = "10",
doi = "10.1002/app.55040",
url = "https://hdl.handle.net/21.15107/rcub_dais_16516"
}

Filipović, S., Obradović, N., Corlett, C., Fahrenholtz, W. G., Rosenschon, M., Füglein, E., Dojčilović, R., Tošić, D., Petrović, J., Đorđević, A., Vlahović, B.,& Pavlović, V. B.. (2024). Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite. in Journal of Applied Polymer Science
Wiley., 141(10), e55040.
https://doi.org/10.1002/app.55040
https://hdl.handle.net/21.15107/rcub_dais_16516

Filipović S, Obradović N, Corlett C, Fahrenholtz WG, Rosenschon M, Füglein E, Dojčilović R, Tošić D, Petrović J, Đorđević A, Vlahović B, Pavlović VB. Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite. in Journal of Applied Polymer Science. 2024;141(10):e55040.
doi:10.1002/app.55040
https://hdl.handle.net/21.15107/rcub_dais_16516 .

Filipović, Suzana, Obradović, Nina, Corlett, Cole, Fahrenholtz, William G., Rosenschon, Martin, Füglein, Ekkehard, Dojčilović, Radovan, Tošić, Dragana, Petrović, Jovana, Đorđević, Antonije, Vlahović, Branislav, Pavlović, Vladimir B., "Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite" in Journal of Applied Polymer Science, 141, no. 10 (2024):e55040,
https://doi.org/10.1002/app.55040 .,
https://hdl.handle.net/21.15107/rcub_dais_16516 .

TY  - CONF
AU  - Obradović, Nina
AU  - Filipović, Suzana
AU  - Rosenschon, Martin
AU  - Füglein, Ekkehard
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12353
AB  - Ceramic/polymer dielectric composites are widely used as components for electric devices, mainly because of their high chemical stability, mechanical strength, and flexibility. In order to increase dielectric permittivity, ceramic fillers with high dielectric constant have been usually incorporated in the polymer matrix in large amounts. With the aim to enhance dielectric properties of matrix, 5 wt.% of BaTiO3/Fe2O3 core/shell composite was added into the PVDF matrix. Prior to addition, five BaTiO3/Fe2O3 powders were prepared by different synthesis conditions. The changes in crystal structure and lattice dynamics of the obtained ceramic/polymer composite were correlated with changes in the phase composition and morphology of BaTiO3/Fe2O3 core/shell filler. Thermal analysis such as DTA/TG/DSC are useful methods to determine various parameters in ceramic/polymer composites. We were able to corroborate that differences in phase composition and morphology of BaTiO3/Fe2O3 core/shell filler have influence on formation of various PVDF allomorph modification, as well as a level of crystallinity.
PB  - Central and Eastern European Committee for Thermal Analysis and Calorimetry (CEEC-TAC)
C3  - Book of abstracts of the 6th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC6) and 15th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2021)
T1  - Influence of BaTiO3/Fe2O3 addition on crystallization and polymorphism of PDVF polymer matrix followed by DSC-TG
SP  - 29
EP  - 29
UR  - https://hdl.handle.net/21.15107/rcub_dais_12353
ER  - 

@conference{
author = "Obradović, Nina and Filipović, Suzana and Rosenschon, Martin and Füglein, Ekkehard",
year = "2021",
abstract = "Ceramic/polymer dielectric composites are widely used as components for electric devices, mainly because of their high chemical stability, mechanical strength, and flexibility. In order to increase dielectric permittivity, ceramic fillers with high dielectric constant have been usually incorporated in the polymer matrix in large amounts. With the aim to enhance dielectric properties of matrix, 5 wt.% of BaTiO3/Fe2O3 core/shell composite was added into the PVDF matrix. Prior to addition, five BaTiO3/Fe2O3 powders were prepared by different synthesis conditions. The changes in crystal structure and lattice dynamics of the obtained ceramic/polymer composite were correlated with changes in the phase composition and morphology of BaTiO3/Fe2O3 core/shell filler. Thermal analysis such as DTA/TG/DSC are useful methods to determine various parameters in ceramic/polymer composites. We were able to corroborate that differences in phase composition and morphology of BaTiO3/Fe2O3 core/shell filler have influence on formation of various PVDF allomorph modification, as well as a level of crystallinity.",
publisher = "Central and Eastern European Committee for Thermal Analysis and Calorimetry (CEEC-TAC)",
journal = "Book of abstracts of the 6th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC6) and 15th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2021)",
title = "Influence of BaTiO3/Fe2O3 addition on crystallization and polymorphism of PDVF polymer matrix followed by DSC-TG",
pages = "29-29",
url = "https://hdl.handle.net/21.15107/rcub_dais_12353"
}

Obradović, N., Filipović, S., Rosenschon, M.,& Füglein, E.. (2021). Influence of BaTiO3/Fe2O3 addition on crystallization and polymorphism of PDVF polymer matrix followed by DSC-TG. in Book of abstracts of the 6th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC6) and 15th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2021)
Central and Eastern European Committee for Thermal Analysis and Calorimetry (CEEC-TAC)., 29-29.
https://hdl.handle.net/21.15107/rcub_dais_12353

Obradović N, Filipović S, Rosenschon M, Füglein E. Influence of BaTiO3/Fe2O3 addition on crystallization and polymorphism of PDVF polymer matrix followed by DSC-TG. in Book of abstracts of the 6th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC6) and 15th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2021). 2021;:29-29.
https://hdl.handle.net/21.15107/rcub_dais_12353 .

Obradović, Nina, Filipović, Suzana, Rosenschon, Martin, Füglein, Ekkehard, "Influence of BaTiO3/Fe2O3 addition on crystallization and polymorphism of PDVF polymer matrix followed by DSC-TG" in Book of abstracts of the 6th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC6) and 15th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2021) (2021):29-29,
https://hdl.handle.net/21.15107/rcub_dais_12353 .

TY  - CONF
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Rosenschon, M.
AU  - Füglein, E.
AU  - Dojčilović, Radovan
AU  - Đorđević, Antonije
AU  - Petrović, J.
AU  - Pavlović, Vladimir B.
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11902
AB  - The increase in the utilization of ceramic/polymer composites as components for electric devices is mainly based on their high chemical stability, mechanical strength, and flexibility. The polymers usually have poor dielectric performances. In order to increase the dielectric permittivity, ceramic fillers with high dielectric constant have been used as active fillers, and usually in large amounts, which have a detrimental effect on the mechanical properties of the composite. With the aim to enhance the dielectric properties of the composite without loss of polymer’s flexibility, 5 wt.% of BaTiO3/Fe2O3 core/shell powders, prepared by different synthesis conditions, was added into the PVDF matrix. The effect of the phase composition and morphology of the starting BaTiO3/Fe2O3 core/shell filler on the crystal structure and lattice dynamics was investigated. Based on the results of the thermal analysis, TG/DSC, various parameters of ceramic/polymer composites were determined. We were able to corroborate that differences in the phase composition and morphology of BaTiO3/Fe2O3 core/shell filler have an influence on the formation of various PVDF allomorph modifications, as well as the level of crystallinity. The dielectric performances of the pure PVDF and polymer/ceramic composites were measured. An enhancement in the dielectric permittivity and decrease in the loss tangent were revealed.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
T1  - Enhanced dielectric properties of PVDF-based composites with BaTiO3 ceramic decorated with Fe2O3
SP  - 58
EP  - 58
UR  - https://hdl.handle.net/21.15107/rcub_dais_11902
ER  - 

@conference{
author = "Filipović, Suzana and Obradović, Nina and Rosenschon, M. and Füglein, E. and Dojčilović, Radovan and Đorđević, Antonije and Petrović, J. and Pavlović, Vladimir B.",
year = "2021",
abstract = "The increase in the utilization of ceramic/polymer composites as components for electric devices is mainly based on their high chemical stability, mechanical strength, and flexibility. The polymers usually have poor dielectric performances. In order to increase the dielectric permittivity, ceramic fillers with high dielectric constant have been used as active fillers, and usually in large amounts, which have a detrimental effect on the mechanical properties of the composite. With the aim to enhance the dielectric properties of the composite without loss of polymer’s flexibility, 5 wt.% of BaTiO3/Fe2O3 core/shell powders, prepared by different synthesis conditions, was added into the PVDF matrix. The effect of the phase composition and morphology of the starting BaTiO3/Fe2O3 core/shell filler on the crystal structure and lattice dynamics was investigated. Based on the results of the thermal analysis, TG/DSC, various parameters of ceramic/polymer composites were determined. We were able to corroborate that differences in the phase composition and morphology of BaTiO3/Fe2O3 core/shell filler have an influence on the formation of various PVDF allomorph modifications, as well as the level of crystallinity. The dielectric performances of the pure PVDF and polymer/ceramic composites were measured. An enhancement in the dielectric permittivity and decrease in the loss tangent were revealed.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021",
title = "Enhanced dielectric properties of PVDF-based composites with BaTiO3 ceramic decorated with Fe2O3",
pages = "58-58",
url = "https://hdl.handle.net/21.15107/rcub_dais_11902"
}

Filipović, S., Obradović, N., Rosenschon, M., Füglein, E., Dojčilović, R., Đorđević, A., Petrović, J.,& Pavlović, V. B.. (2021). Enhanced dielectric properties of PVDF-based composites with BaTiO3 ceramic decorated with Fe2O3. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
Belgrade : Serbian Ceramic Society., 58-58.
https://hdl.handle.net/21.15107/rcub_dais_11902

Filipović S, Obradović N, Rosenschon M, Füglein E, Dojčilović R, Đorđević A, Petrović J, Pavlović VB. Enhanced dielectric properties of PVDF-based composites with BaTiO3 ceramic decorated with Fe2O3. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021. 2021;:58-58.
https://hdl.handle.net/21.15107/rcub_dais_11902 .

Filipović, Suzana, Obradović, Nina, Rosenschon, M., Füglein, E., Dojčilović, Radovan, Đorđević, Antonije, Petrović, J., Pavlović, Vladimir B., "Enhanced dielectric properties of PVDF-based composites with BaTiO3 ceramic decorated with Fe2O3" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021 (2021):58-58,
https://hdl.handle.net/21.15107/rcub_dais_11902 .