TY  - CONF
AU  - Nikolić, Irena
AU  - Radmilović, Vuk V.
AU  - Marković, Smilja
AU  - Veselinović, Ljiljana
AU  - Janković-Častvan, Ivona
AU  - Radmilović, Velimir R.
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13638
AB  - Alkali activated slag (AAS) is an environmentally friendly material which were extensively investigated in a pass two decade. Currently, these materials are considering as an effective alternative for cement binder. Process of slag alkali activation involves a chemical reaction between solid calcium aluminosilicate materials and a highly alkaline activator. The alkali activation mechanism of slag consists of the slag dissolution in a highly alkaline which is followed by the condensation and hardening processes yielding formation of calcium (alumina) silicate hydrate C– (A)–S–H gel as a reaction product of slag alkali activation. Properties of these materials primarily depends on the choice of solid row materials. Primarily, granulated blast furnace slag, by product of iron production) is considering as a precursor for AAS synthesis. However, an important shift towards the use of steelmaking slag is also observed. Although electric arc furnace slag has already found its application mainly in civil engineering, this investigation has aimed to investigate properties of AAS prepared using the electric arc furnace slag (EAFS) with an emphasize with different possibilities of its application. Characterization of AAS involved XRDP, SEM/EDS and pore size analysis with the aim to build up a detailed illustration of AAS from the stand point of different application.
PB  - Belgrade : Serbian Academy of Sciences and Arts
C3  - Program & Book of Abstracts / Second International Conference ELMINA 2022, Belgrade, Serbia, August 22nd-26th, 2022
T1  - Alkali activated slag based on steelmaking slag: application and properties
SP  - 92
EP  - 93
UR  - https://hdl.handle.net/21.15107/rcub_dais_13638
ER  - 

@conference{
author = "Nikolić, Irena and Radmilović, Vuk V. and Marković, Smilja and Veselinović, Ljiljana and Janković-Častvan, Ivona and Radmilović, Velimir R.",
year = "2022",
abstract = "Alkali activated slag (AAS) is an environmentally friendly material which were extensively investigated in a pass two decade. Currently, these materials are considering as an effective alternative for cement binder. Process of slag alkali activation involves a chemical reaction between solid calcium aluminosilicate materials and a highly alkaline activator. The alkali activation mechanism of slag consists of the slag dissolution in a highly alkaline which is followed by the condensation and hardening processes yielding formation of calcium (alumina) silicate hydrate C– (A)–S–H gel as a reaction product of slag alkali activation. Properties of these materials primarily depends on the choice of solid row materials. Primarily, granulated blast furnace slag, by product of iron production) is considering as a precursor for AAS synthesis. However, an important shift towards the use of steelmaking slag is also observed. Although electric arc furnace slag has already found its application mainly in civil engineering, this investigation has aimed to investigate properties of AAS prepared using the electric arc furnace slag (EAFS) with an emphasize with different possibilities of its application. Characterization of AAS involved XRDP, SEM/EDS and pore size analysis with the aim to build up a detailed illustration of AAS from the stand point of different application.",
publisher = "Belgrade : Serbian Academy of Sciences and Arts",
journal = "Program & Book of Abstracts / Second International Conference ELMINA 2022, Belgrade, Serbia, August 22nd-26th, 2022",
title = "Alkali activated slag based on steelmaking slag: application and properties",
pages = "92-93",
url = "https://hdl.handle.net/21.15107/rcub_dais_13638"
}

Nikolić, I., Radmilović, V. V., Marković, S., Veselinović, L., Janković-Častvan, I.,& Radmilović, V. R.. (2022). Alkali activated slag based on steelmaking slag: application and properties. in Program & Book of Abstracts / Second International Conference ELMINA 2022, Belgrade, Serbia, August 22nd-26th, 2022
Belgrade : Serbian Academy of Sciences and Arts., 92-93.
https://hdl.handle.net/21.15107/rcub_dais_13638

Nikolić I, Radmilović VV, Marković S, Veselinović L, Janković-Častvan I, Radmilović VR. Alkali activated slag based on steelmaking slag: application and properties. in Program & Book of Abstracts / Second International Conference ELMINA 2022, Belgrade, Serbia, August 22nd-26th, 2022. 2022;:92-93.
https://hdl.handle.net/21.15107/rcub_dais_13638 .

Nikolić, Irena, Radmilović, Vuk V., Marković, Smilja, Veselinović, Ljiljana, Janković-Častvan, Ivona, Radmilović, Velimir R., "Alkali activated slag based on steelmaking slag: application and properties" in Program & Book of Abstracts / Second International Conference ELMINA 2022, Belgrade, Serbia, August 22nd-26th, 2022 (2022):92-93,
https://hdl.handle.net/21.15107/rcub_dais_13638 .

TY  - JOUR
AU  - Rizzotto, Francesco
AU  - Vasiljević, Zorka Ž.
AU  - Stanojević, Gordana
AU  - Dojčinović, Milena P.
AU  - Janković-Častvan, Ivona
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Branković, Goran
AU  - Magniez, Aurélie
AU  - Vidić, Jasmina
AU  - Nikolić, Maria Vesna
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13437
AB  - An emerging technology of active packaging enables prolongation of food shelf life by limiting the oxygen transfer and the reactivity of free radicals, which both destruct food freshness. In this work, Fe2TiO5 nanoparticles were synthesized using a modified sol–gel method and evaluated as an enforcement of alginate food packaging film. Pure phase Fe2TiO5 nanoparticles had an average particle size of 44 nm and rhombohedral morphology. Fe2TiO5 nanoparticles induce no cell damage of human Caco-2 epithelial cells and show no inhibitory effect towards growth of a panel of bacterial strains, suggesting good biocompatibility. Films obtained by incorporation of Fe2TiO5 nanoparticles into alginate using the solvent casting method show no migration of iron or titanium ions from films to food simulants again suggesting their safety as a packaging material. Fe2TiO5 nanoparticles also showed strong antioxidant efficiency as determined using the DPPḢ assay, and confirmed further in a preservation test on fresh fruit.
PB  - Elsevier Ltd
T2  - Food Chemistry
T1  - Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application
SP  - 133198
VL  - 390
DO  - 10.1016/j.foodchem.2022.133198
UR  - https://hdl.handle.net/21.15107/rcub_dais_13437
ER  - 

@article{
author = "Rizzotto, Francesco and Vasiljević, Zorka Ž. and Stanojević, Gordana and Dojčinović, Milena P. and Janković-Častvan, Ivona and Vujančević, Jelena and Tadić, Nenad B. and Branković, Goran and Magniez, Aurélie and Vidić, Jasmina and Nikolić, Maria Vesna",
year = "2022",
abstract = "An emerging technology of active packaging enables prolongation of food shelf life by limiting the oxygen transfer and the reactivity of free radicals, which both destruct food freshness. In this work, Fe2TiO5 nanoparticles were synthesized using a modified sol–gel method and evaluated as an enforcement of alginate food packaging film. Pure phase Fe2TiO5 nanoparticles had an average particle size of 44 nm and rhombohedral morphology. Fe2TiO5 nanoparticles induce no cell damage of human Caco-2 epithelial cells and show no inhibitory effect towards growth of a panel of bacterial strains, suggesting good biocompatibility. Films obtained by incorporation of Fe2TiO5 nanoparticles into alginate using the solvent casting method show no migration of iron or titanium ions from films to food simulants again suggesting their safety as a packaging material. Fe2TiO5 nanoparticles also showed strong antioxidant efficiency as determined using the DPPḢ assay, and confirmed further in a preservation test on fresh fruit.",
publisher = "Elsevier Ltd",
journal = "Food Chemistry",
title = "Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application",
pages = "133198",
volume = "390",
doi = "10.1016/j.foodchem.2022.133198",
url = "https://hdl.handle.net/21.15107/rcub_dais_13437"
}

Rizzotto, F., Vasiljević, Z. Ž., Stanojević, G., Dojčinović, M. P., Janković-Častvan, I., Vujančević, J., Tadić, N. B., Branković, G., Magniez, A., Vidić, J.,& Nikolić, M. V.. (2022). Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application. in Food Chemistry
Elsevier Ltd., 390, 133198.
https://doi.org/10.1016/j.foodchem.2022.133198
https://hdl.handle.net/21.15107/rcub_dais_13437

Rizzotto F, Vasiljević ZŽ, Stanojević G, Dojčinović MP, Janković-Častvan I, Vujančević J, Tadić NB, Branković G, Magniez A, Vidić J, Nikolić MV. Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application. in Food Chemistry. 2022;390:133198.
doi:10.1016/j.foodchem.2022.133198
https://hdl.handle.net/21.15107/rcub_dais_13437 .

Rizzotto, Francesco, Vasiljević, Zorka Ž., Stanojević, Gordana, Dojčinović, Milena P., Janković-Častvan, Ivona, Vujančević, Jelena, Tadić, Nenad B., Branković, Goran, Magniez, Aurélie, Vidić, Jasmina, Nikolić, Maria Vesna, "Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application" in Food Chemistry, 390 (2022):133198,
https://doi.org/10.1016/j.foodchem.2022.133198 .,
https://hdl.handle.net/21.15107/rcub_dais_13437 .

TY  - JOUR
AU  - Rizzotto, Francesco
AU  - Vasiljević, Zorka Ž.
AU  - Stanojević, Gordana
AU  - Dojčinović, Milena P.
AU  - Janković-Častvan, Ivona
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Branković, Goran
AU  - Magniez, Aurélie
AU  - Vidić, Jasmina
AU  - Nikolić, Maria Vesna
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13014
AB  - An emerging technology of active packaging enables prolongation of food shelf life by limiting the oxygen transfer and the reactivity of free radicals, which both destruct food freshness. In this work, Fe2TiO5 nanoparticles were synthesized using a modified sol–gel method and evaluated as an enforcement of alginate food packaging film. Pure phase Fe2TiO5 nanoparticles had an average particle size of 44 nm and rhombohedral morphology. Fe2TiO5 nanoparticles induce no cell damage of human Caco-2 epithelial cells and show no inhibitory effect towards growth of a panel of bacterial strains, suggesting good biocompatibility. Films obtained by incorporation of Fe2TiO5 nanoparticles into alginate using the solvent casting method show no migration of iron or titanium ions from films to food simulants again suggesting their safety as a packaging material. Fe2TiO5 nanoparticles also showed strong antioxidant efficiency as determined using the DPPḢ assay, and confirmed further in a preservation test on fresh fruit.
PB  - Elsevier Ltd
T2  - Food Chemistry
T1  - Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application
SP  - 133198
VL  - 390
DO  - 10.1016/j.foodchem.2022.133198
UR  - https://hdl.handle.net/21.15107/rcub_dais_13014
ER  - 

@article{
author = "Rizzotto, Francesco and Vasiljević, Zorka Ž. and Stanojević, Gordana and Dojčinović, Milena P. and Janković-Častvan, Ivona and Vujančević, Jelena and Tadić, Nenad B. and Branković, Goran and Magniez, Aurélie and Vidić, Jasmina and Nikolić, Maria Vesna",
year = "2022",
abstract = "An emerging technology of active packaging enables prolongation of food shelf life by limiting the oxygen transfer and the reactivity of free radicals, which both destruct food freshness. In this work, Fe2TiO5 nanoparticles were synthesized using a modified sol–gel method and evaluated as an enforcement of alginate food packaging film. Pure phase Fe2TiO5 nanoparticles had an average particle size of 44 nm and rhombohedral morphology. Fe2TiO5 nanoparticles induce no cell damage of human Caco-2 epithelial cells and show no inhibitory effect towards growth of a panel of bacterial strains, suggesting good biocompatibility. Films obtained by incorporation of Fe2TiO5 nanoparticles into alginate using the solvent casting method show no migration of iron or titanium ions from films to food simulants again suggesting their safety as a packaging material. Fe2TiO5 nanoparticles also showed strong antioxidant efficiency as determined using the DPPḢ assay, and confirmed further in a preservation test on fresh fruit.",
publisher = "Elsevier Ltd",
journal = "Food Chemistry",
title = "Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application",
pages = "133198",
volume = "390",
doi = "10.1016/j.foodchem.2022.133198",
url = "https://hdl.handle.net/21.15107/rcub_dais_13014"
}

Rizzotto, F., Vasiljević, Z. Ž., Stanojević, G., Dojčinović, M. P., Janković-Častvan, I., Vujančević, J., Tadić, N. B., Branković, G., Magniez, A., Vidić, J.,& Nikolić, M. V.. (2022). Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application. in Food Chemistry
Elsevier Ltd., 390, 133198.
https://doi.org/10.1016/j.foodchem.2022.133198
https://hdl.handle.net/21.15107/rcub_dais_13014

Rizzotto F, Vasiljević ZŽ, Stanojević G, Dojčinović MP, Janković-Častvan I, Vujančević J, Tadić NB, Branković G, Magniez A, Vidić J, Nikolić MV. Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application. in Food Chemistry. 2022;390:133198.
doi:10.1016/j.foodchem.2022.133198
https://hdl.handle.net/21.15107/rcub_dais_13014 .

Rizzotto, Francesco, Vasiljević, Zorka Ž., Stanojević, Gordana, Dojčinović, Milena P., Janković-Častvan, Ivona, Vujančević, Jelena, Tadić, Nenad B., Branković, Goran, Magniez, Aurélie, Vidić, Jasmina, Nikolić, Maria Vesna, "Antioxidant and cell-friendly Fe2TiO5 nanoparticles for food packaging application" in Food Chemistry, 390 (2022):133198,
https://doi.org/10.1016/j.foodchem.2022.133198 .,
https://hdl.handle.net/21.15107/rcub_dais_13014 .

TY  - CONF
AU  - Marković, Smilja
AU  - Machado, T. M.
AU  - Dinić, Ivana
AU  - Veselinović, Ljiljana
AU  - Janković Častvan, Ivona
AU  - Marinković, Bojan A.
AU  - Mančić, Lidija
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12989
AB  - Micro- and nano-sized core-shell particles for efficient photocatalysis were successfully synthesized by a two step wet-chemical route. The core composed of up-converting (UC) NaYF4:Yb,Tm phase was prepared through EDTA assisted hydrothermal process, while the shell of anatase TiO2 –Acetylacetone (TiO2-Acac) charge-transfer complex was formed via a sol-gel method. During coating, the effect of polyvinylpyrrolidone (PVP) addition on the core and shell coupling was investigated. Two forms of core structures were obtained: hexagonal microprisms of beta-NaYF4:Yb,Tm and alpha-NaYF4:Yb,Tm nanospheres, both coated with TiO2-Acac nanocrystals.
PB  - Belgrade : Society of Physical Chemists of Serbia
C3  - Physical Chemistry 2021 : proceedings. Vol. 2 / 15th International Conference on Fundamental and Applied Aspects of Physical Chemistry, September 20-24, 2021, Belgrade, Serbia
T1  - Synthesis of core-shell NaYF4:Yb,Tm@TiO2-Acac micro- and nano-sized particles for efficient photocatalysis
UR  - https://hdl.handle.net/21.15107/rcub_dais_12989
ER  - 

@conference{
author = "Marković, Smilja and Machado, T. M. and Dinić, Ivana and Veselinović, Ljiljana and Janković Častvan, Ivona and Marinković, Bojan A. and Mančić, Lidija",
year = "2021",
abstract = "Micro- and nano-sized core-shell particles for efficient photocatalysis were successfully synthesized by a two step wet-chemical route. The core composed of up-converting (UC) NaYF4:Yb,Tm phase was prepared through EDTA assisted hydrothermal process, while the shell of anatase TiO2 –Acetylacetone (TiO2-Acac) charge-transfer complex was formed via a sol-gel method. During coating, the effect of polyvinylpyrrolidone (PVP) addition on the core and shell coupling was investigated. Two forms of core structures were obtained: hexagonal microprisms of beta-NaYF4:Yb,Tm and alpha-NaYF4:Yb,Tm nanospheres, both coated with TiO2-Acac nanocrystals.",
publisher = "Belgrade : Society of Physical Chemists of Serbia",
journal = "Physical Chemistry 2021 : proceedings. Vol. 2 / 15th International Conference on Fundamental and Applied Aspects of Physical Chemistry, September 20-24, 2021, Belgrade, Serbia",
title = "Synthesis of core-shell NaYF4:Yb,Tm@TiO2-Acac micro- and nano-sized particles for efficient photocatalysis",
url = "https://hdl.handle.net/21.15107/rcub_dais_12989"
}

Marković, S., Machado, T. M., Dinić, I., Veselinović, L., Janković Častvan, I., Marinković, B. A.,& Mančić, L.. (2021). Synthesis of core-shell NaYF4:Yb,Tm@TiO2-Acac micro- and nano-sized particles for efficient photocatalysis. in Physical Chemistry 2021 : proceedings. Vol. 2 / 15th International Conference on Fundamental and Applied Aspects of Physical Chemistry, September 20-24, 2021, Belgrade, Serbia
Belgrade : Society of Physical Chemists of Serbia..
https://hdl.handle.net/21.15107/rcub_dais_12989

Marković S, Machado TM, Dinić I, Veselinović L, Janković Častvan I, Marinković BA, Mančić L. Synthesis of core-shell NaYF4:Yb,Tm@TiO2-Acac micro- and nano-sized particles for efficient photocatalysis. in Physical Chemistry 2021 : proceedings. Vol. 2 / 15th International Conference on Fundamental and Applied Aspects of Physical Chemistry, September 20-24, 2021, Belgrade, Serbia. 2021;.
https://hdl.handle.net/21.15107/rcub_dais_12989 .

Marković, Smilja, Machado, T. M., Dinić, Ivana, Veselinović, Ljiljana, Janković Častvan, Ivona, Marinković, Bojan A., Mančić, Lidija, "Synthesis of core-shell NaYF4:Yb,Tm@TiO2-Acac micro- and nano-sized particles for efficient photocatalysis" in Physical Chemistry 2021 : proceedings. Vol. 2 / 15th International Conference on Fundamental and Applied Aspects of Physical Chemistry, September 20-24, 2021, Belgrade, Serbia (2021),
https://hdl.handle.net/21.15107/rcub_dais_12989 .

TY  - CONF
AU  - Nikolić, Irena
AU  - Đurović, Dijana
AU  - Marković, Smilja
AU  - Veselinović, Ljiljana
AU  - Janković, Ivona
AU  - Radmilović, Vuk V.
AU  - Radmilović, Velimir R.
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12074
AB  - The newer methods of electric arc furnace dust (EAFD) valorisation include its stabilization into materials which potentially can be used in construction. This is the most promising method because of the low costs and waste reduction. The purpose of these study was to investigate the properties of alkali activated cement (AAC) based on fly ash (FA) or steelmaking electric arc furnace slag (EAFS) as an agent fora stabilization/solidification of EAFD. The control type of AAC samples were prepared by mixing of solid precursor (FA or EAFS) with a mixture of 10 M NaOH and Na2SiO3 solutions followed by curing at in the oven for 48 h at 65 C. The samples of AAC doped with EAFD were prepared at the same conditions but the EAFD was added to the starting mixtures with FA in quantities of 10, 20 and 30% of total solid phase and 1, 2, 5 and 7 % of total EAFS solid phase. The results have shown that both, FA and EAFS can be successfully used as an agent for EAFD stabilization. AAC samples based of FA and EAFS exhibited strength which is suitable for both, landfill and construction applications. Stabilization of EAFD into the AAC matrix occurred by chemical and physical immobilization. Chemical immobilization of Zn into the reaction product of FA and EAFS alkali activation was confirmed by SEM/EDS investigations. The leaching of Zn from both, AAC matrix based on FA and EAFS is inferior in comparison to pristine EAFD and met the criteria for granular waste disposal at landfills for non-hazardous waste according the EN 12457-2 test.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and the Book of abstracts / Twenty-second Annual Conference YUCOMAT 2021 Herceg Novi, Montenegro, August 30 - September 3, 2021
T1  - New environmentally acceptable materials based on flay ash, steelmaking slag and Zn-reach electric arc furnace dust
T1  - New environmentally acceptable materials based on fly ash, steelmaking slag and Zn-reach electric arc furnace dust
SP  - 114
EP  - 114
UR  - https://hdl.handle.net/21.15107/rcub_dais_12074
ER  - 

@conference{
author = "Nikolić, Irena and Đurović, Dijana and Marković, Smilja and Veselinović, Ljiljana and Janković, Ivona and Radmilović, Vuk V. and Radmilović, Velimir R.",
year = "2021",
abstract = "The newer methods of electric arc furnace dust (EAFD) valorisation include its stabilization into materials which potentially can be used in construction. This is the most promising method because of the low costs and waste reduction. The purpose of these study was to investigate the properties of alkali activated cement (AAC) based on fly ash (FA) or steelmaking electric arc furnace slag (EAFS) as an agent fora stabilization/solidification of EAFD. The control type of AAC samples were prepared by mixing of solid precursor (FA or EAFS) with a mixture of 10 M NaOH and Na2SiO3 solutions followed by curing at in the oven for 48 h at 65 C. The samples of AAC doped with EAFD were prepared at the same conditions but the EAFD was added to the starting mixtures with FA in quantities of 10, 20 and 30% of total solid phase and 1, 2, 5 and 7 % of total EAFS solid phase. The results have shown that both, FA and EAFS can be successfully used as an agent for EAFD stabilization. AAC samples based of FA and EAFS exhibited strength which is suitable for both, landfill and construction applications. Stabilization of EAFD into the AAC matrix occurred by chemical and physical immobilization. Chemical immobilization of Zn into the reaction product of FA and EAFS alkali activation was confirmed by SEM/EDS investigations. The leaching of Zn from both, AAC matrix based on FA and EAFS is inferior in comparison to pristine EAFD and met the criteria for granular waste disposal at landfills for non-hazardous waste according the EN 12457-2 test.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and the Book of abstracts / Twenty-second Annual Conference YUCOMAT 2021 Herceg Novi, Montenegro, August 30 - September 3, 2021",
title = "New environmentally acceptable materials based on flay ash, steelmaking slag and Zn-reach electric arc furnace dust, New environmentally acceptable materials based on fly ash, steelmaking slag and Zn-reach electric arc furnace dust",
pages = "114-114",
url = "https://hdl.handle.net/21.15107/rcub_dais_12074"
}

Nikolić, I., Đurović, D., Marković, S., Veselinović, L., Janković, I., Radmilović, V. V.,& Radmilović, V. R.. (2021). New environmentally acceptable materials based on flay ash, steelmaking slag and Zn-reach electric arc furnace dust. in Programme and the Book of abstracts / Twenty-second Annual Conference YUCOMAT 2021 Herceg Novi, Montenegro, August 30 - September 3, 2021
Belgrade : Materials Research Society of Serbia., 114-114.
https://hdl.handle.net/21.15107/rcub_dais_12074

Nikolić I, Đurović D, Marković S, Veselinović L, Janković I, Radmilović VV, Radmilović VR. New environmentally acceptable materials based on flay ash, steelmaking slag and Zn-reach electric arc furnace dust. in Programme and the Book of abstracts / Twenty-second Annual Conference YUCOMAT 2021 Herceg Novi, Montenegro, August 30 - September 3, 2021. 2021;:114-114.
https://hdl.handle.net/21.15107/rcub_dais_12074 .

Nikolić, Irena, Đurović, Dijana, Marković, Smilja, Veselinović, Ljiljana, Janković, Ivona, Radmilović, Vuk V., Radmilović, Velimir R., "New environmentally acceptable materials based on flay ash, steelmaking slag and Zn-reach electric arc furnace dust" in Programme and the Book of abstracts / Twenty-second Annual Conference YUCOMAT 2021 Herceg Novi, Montenegro, August 30 - September 3, 2021 (2021):114-114,
https://hdl.handle.net/21.15107/rcub_dais_12074 .

TY  - CONF
AU  - Marković, Smilja
AU  - Machado, T. M.
AU  - Dinić, Ivana
AU  - Veselinović, Ljiljana
AU  - Janković-Častvan, Ivona
AU  - Marinković, Bojan A.
AU  - Mančić, Lidija
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12360
AB  - Micro- and nano-sized core-shell particles for efficient photocatalysis were successfully synthesized by a two step wet-chemical route. The core composed of up-converting (UC) NaYF4:Yb,Tm phase was prepared through EDTA assisted hydrothermal process, while the shell of anatase TiO2 –Acetylacetone (TiO2-Acac) charge-transfer complex was formed via a sol-gel method. During coating, the effect of polyvinylpyrrolidone (PVP) addition on the core and shell coupling was investigated. Two forms of core structures were obtained: hexagonal microprisms of -NaYF4:Yb,Tm and -NaYF4:Yb,Tm nanospheres, both coated with TiO2-Acac nanocrystals.
PB  - Belgrade : Society of Physical Chemists of Serbia
C3  - 15th International Conference on Fundamental and Applied Aspects of Physical Chemistry : Physical chemistry 2021
T1  - Synthesis of core-shell NaYF4:Yb,Tm@TiO2-Acacc micro- and nano-sized particles for efficient photocatalysis
SP  - 76
EP  - 76
UR  - https://hdl.handle.net/21.15107/rcub_dais_12360
ER  - 

@conference{
author = "Marković, Smilja and Machado, T. M. and Dinić, Ivana and Veselinović, Ljiljana and Janković-Častvan, Ivona and Marinković, Bojan A. and Mančić, Lidija",
year = "2021",
abstract = "Micro- and nano-sized core-shell particles for efficient photocatalysis were successfully synthesized by a two step wet-chemical route. The core composed of up-converting (UC) NaYF4:Yb,Tm phase was prepared through EDTA assisted hydrothermal process, while the shell of anatase TiO2 –Acetylacetone (TiO2-Acac) charge-transfer complex was formed via a sol-gel method. During coating, the effect of polyvinylpyrrolidone (PVP) addition on the core and shell coupling was investigated. Two forms of core structures were obtained: hexagonal microprisms of -NaYF4:Yb,Tm and -NaYF4:Yb,Tm nanospheres, both coated with TiO2-Acac nanocrystals.",
publisher = "Belgrade : Society of Physical Chemists of Serbia",
journal = "15th International Conference on Fundamental and Applied Aspects of Physical Chemistry : Physical chemistry 2021",
title = "Synthesis of core-shell NaYF4:Yb,Tm@TiO2-Acacc micro- and nano-sized particles for efficient photocatalysis",
pages = "76-76",
url = "https://hdl.handle.net/21.15107/rcub_dais_12360"
}

Marković, S., Machado, T. M., Dinić, I., Veselinović, L., Janković-Častvan, I., Marinković, B. A.,& Mančić, L.. (2021). Synthesis of core-shell NaYF4:Yb,Tm@TiO2-Acacc micro- and nano-sized particles for efficient photocatalysis. in 15th International Conference on Fundamental and Applied Aspects of Physical Chemistry : Physical chemistry 2021
Belgrade : Society of Physical Chemists of Serbia., 76-76.
https://hdl.handle.net/21.15107/rcub_dais_12360

Marković S, Machado TM, Dinić I, Veselinović L, Janković-Častvan I, Marinković BA, Mančić L. Synthesis of core-shell NaYF4:Yb,Tm@TiO2-Acacc micro- and nano-sized particles for efficient photocatalysis. in 15th International Conference on Fundamental and Applied Aspects of Physical Chemistry : Physical chemistry 2021. 2021;:76-76.
https://hdl.handle.net/21.15107/rcub_dais_12360 .

Marković, Smilja, Machado, T. M., Dinić, Ivana, Veselinović, Ljiljana, Janković-Častvan, Ivona, Marinković, Bojan A., Mančić, Lidija, "Synthesis of core-shell NaYF4:Yb,Tm@TiO2-Acacc micro- and nano-sized particles for efficient photocatalysis" in 15th International Conference on Fundamental and Applied Aspects of Physical Chemistry : Physical chemistry 2021 (2021):76-76,
https://hdl.handle.net/21.15107/rcub_dais_12360 .

TY  - JOUR
AU  - Rajić, Vladimir
AU  - Stojković Simatović, Ivana
AU  - Veselinović, Ljiljana
AU  - Belošević Čavor, Jelena
AU  - Novaković, Mirjana
AU  - Popović, Maja
AU  - Škapin, Srečo Davor
AU  - Mojović, Miloš
AU  - Stojadinović, Stevan
AU  - Rac, Vladislav
AU  - Janković Častvan, Ivona
AU  - Marković, Smilja
PY  - 2020
UR  - https://pubs.rsc.org/en/content/articlelanding/2020/cp/d0cp03377d
UR  - https://dais.sanu.ac.rs/123456789/9543
AB  - Eco-friendly and rapid microwave processing of a precipitate was used to produce Fe-doped zinc oxide (Zn1−xFexO, x = 0, 0.05, 0.1, 0.15 and 0.20; ZnO:Fe) nanoparticles, which were tested as catalysts toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in a moderately alkaline solution. The phase composition, crystal structure, morphology, textural properties, surface chemistry, optical properties and band structure were examined to comprehend the influence of Zn2+ partial substitution with Fe3+ on the catalytic activity of ZnO:Fe. Linear sweep voltammetry showed an improved catalytic activity of ZnO:5Fe toward the ORR, compared to pure ZnO, while with increased amounts of the Fe-dopant the activity decreased. The improvement was suggested by a more positive onset potential (0.394 V vs. RHE), current density (0.231 mA cm−2 at 0.150 V vs. RHE), and faster kinetics (Tafel slope, b = 248 mV dec−1), and it may be due to the synergistic effect of (1) a sufficient amount of surface oxygen vacancies, and (2) a certain amount of plate-like particles composed of crystallites with well developed (0001) and (000) facets. Quite the contrary, the OER study showed that the introduction of Fe3+ ions into the ZnO crystal structure resulted in enhanced catalytic activity of all ZnO:Fe samples, compared to pure ZnO, probably due to the modified binding energy and an optimized band structure. With the maximal current density of 1.066 mA cm−2 at 2.216 V vs. RHE, an onset potential of 1.856 V vs. RHE, and the smallest potential difference between the OER and ORR (ΔE = 1.58 V), ZnO:10Fe may be considered a promising bifunctional catalyst toward the OER/ORR in moderately alkaline solution. This study demonstrates that the electrocatalytic activity of ZnO:Fe strongly depends on the defect chemistry and consequently the band structure. Along with providing fundamental insight into the electrocatalytic activity of ZnO:Fe, the study also indicates an optimal stoichiometry for enhanced bifunctional activity toward the OER/ORR, compared to pure ZnO.
PB  - Royal Society of Chemistry
T2  - Physical Chemistry Chemical Physics
T1  - Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry
SP  - 22078
EP  - 22095
VL  - 22
IS  - 38
DO  - 10.1039/D0CP03377D
UR  - https://hdl.handle.net/21.15107/rcub_dais_9543
ER  - 

@article{
author = "Rajić, Vladimir and Stojković Simatović, Ivana and Veselinović, Ljiljana and Belošević Čavor, Jelena and Novaković, Mirjana and Popović, Maja and Škapin, Srečo Davor and Mojović, Miloš and Stojadinović, Stevan and Rac, Vladislav and Janković Častvan, Ivona and Marković, Smilja",
year = "2020",
abstract = "Eco-friendly and rapid microwave processing of a precipitate was used to produce Fe-doped zinc oxide (Zn1−xFexO, x = 0, 0.05, 0.1, 0.15 and 0.20; ZnO:Fe) nanoparticles, which were tested as catalysts toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in a moderately alkaline solution. The phase composition, crystal structure, morphology, textural properties, surface chemistry, optical properties and band structure were examined to comprehend the influence of Zn2+ partial substitution with Fe3+ on the catalytic activity of ZnO:Fe. Linear sweep voltammetry showed an improved catalytic activity of ZnO:5Fe toward the ORR, compared to pure ZnO, while with increased amounts of the Fe-dopant the activity decreased. The improvement was suggested by a more positive onset potential (0.394 V vs. RHE), current density (0.231 mA cm−2 at 0.150 V vs. RHE), and faster kinetics (Tafel slope, b = 248 mV dec−1), and it may be due to the synergistic effect of (1) a sufficient amount of surface oxygen vacancies, and (2) a certain amount of plate-like particles composed of crystallites with well developed (0001) and (000) facets. Quite the contrary, the OER study showed that the introduction of Fe3+ ions into the ZnO crystal structure resulted in enhanced catalytic activity of all ZnO:Fe samples, compared to pure ZnO, probably due to the modified binding energy and an optimized band structure. With the maximal current density of 1.066 mA cm−2 at 2.216 V vs. RHE, an onset potential of 1.856 V vs. RHE, and the smallest potential difference between the OER and ORR (ΔE = 1.58 V), ZnO:10Fe may be considered a promising bifunctional catalyst toward the OER/ORR in moderately alkaline solution. This study demonstrates that the electrocatalytic activity of ZnO:Fe strongly depends on the defect chemistry and consequently the band structure. Along with providing fundamental insight into the electrocatalytic activity of ZnO:Fe, the study also indicates an optimal stoichiometry for enhanced bifunctional activity toward the OER/ORR, compared to pure ZnO.",
publisher = "Royal Society of Chemistry",
journal = "Physical Chemistry Chemical Physics",
title = "Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry",
pages = "22078-22095",
volume = "22",
number = "38",
doi = "10.1039/D0CP03377D",
url = "https://hdl.handle.net/21.15107/rcub_dais_9543"
}

Rajić, V., Stojković Simatović, I., Veselinović, L., Belošević Čavor, J., Novaković, M., Popović, M., Škapin, S. D., Mojović, M., Stojadinović, S., Rac, V., Janković Častvan, I.,& Marković, S.. (2020). Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry. in Physical Chemistry Chemical Physics
Royal Society of Chemistry., 22(38), 22078-22095.
https://doi.org/10.1039/D0CP03377D
https://hdl.handle.net/21.15107/rcub_dais_9543

Rajić V, Stojković Simatović I, Veselinović L, Belošević Čavor J, Novaković M, Popović M, Škapin SD, Mojović M, Stojadinović S, Rac V, Janković Častvan I, Marković S. Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry. in Physical Chemistry Chemical Physics. 2020;22(38):22078-22095.
doi:10.1039/D0CP03377D
https://hdl.handle.net/21.15107/rcub_dais_9543 .

Rajić, Vladimir, Stojković Simatović, Ivana, Veselinović, Ljiljana, Belošević Čavor, Jelena, Novaković, Mirjana, Popović, Maja, Škapin, Srečo Davor, Mojović, Miloš, Stojadinović, Stevan, Rac, Vladislav, Janković Častvan, Ivona, Marković, Smilja, "Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry" in Physical Chemistry Chemical Physics, 22, no. 38 (2020):22078-22095,
https://doi.org/10.1039/D0CP03377D .,
https://hdl.handle.net/21.15107/rcub_dais_9543 .

TY  - JOUR
AU  - Rajić, Vladimir
AU  - Stojković Simatović, Ivana
AU  - Veselinović, Ljiljana
AU  - Belošević Čavor, Jelena
AU  - Novaković, Mirjana
AU  - Popović, Maja
AU  - Škapin, Srečo Davor
AU  - Mojović, Miloš
AU  - Stojadinović, Stevan
AU  - Rac, Vladislav
AU  - Janković Častvan, Ivona
AU  - Marković, Smilja
PY  - 2020
UR  - https://pubs.rsc.org/en/content/articlelanding/2020/cp/d0cp03377d
UR  - https://dais.sanu.ac.rs/123456789/9544
AB  - Eco-friendly and rapid microwave processing of a precipitate was used to produce Fe-doped zinc oxide (Zn1−xFexO, x = 0, 0.05, 0.1, 0.15 and 0.20; ZnO:Fe) nanoparticles, which were tested as catalysts toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in a moderately alkaline solution. The phase composition, crystal structure, morphology, textural properties, surface chemistry, optical properties and band structure were examined to comprehend the influence of Zn2+ partial substitution with Fe3+ on the catalytic activity of ZnO:Fe. Linear sweep voltammetry showed an improved catalytic activity of ZnO:5Fe toward the ORR, compared to pure ZnO, while with increased amounts of the Fe-dopant the activity decreased. The improvement was suggested by a more positive onset potential (0.394 V vs. RHE), current density (0.231 mA cm−2 at 0.150 V vs. RHE), and faster kinetics (Tafel slope, b = 248 mV dec−1), and it may be due to the synergistic effect of (1) a sufficient amount of surface oxygen vacancies, and (2) a certain amount of plate-like particles composed of crystallites with well developed (0001) and (000) facets. Quite the contrary, the OER study showed that the introduction of Fe3+ ions into the ZnO crystal structure resulted in enhanced catalytic activity of all ZnO:Fe samples, compared to pure ZnO, probably due to the modified binding energy and an optimized band structure. With the maximal current density of 1.066 mA cm−2 at 2.216 V vs. RHE, an onset potential of 1.856 V vs. RHE, and the smallest potential difference between the OER and ORR (ΔE = 1.58 V), ZnO:10Fe may be considered a promising bifunctional catalyst toward the OER/ORR in moderately alkaline solution. This study demonstrates that the electrocatalytic activity of ZnO:Fe strongly depends on the defect chemistry and consequently the band structure. Along with providing fundamental insight into the electrocatalytic activity of ZnO:Fe, the study also indicates an optimal stoichiometry for enhanced bifunctional activity toward the OER/ORR, compared to pure ZnO.
PB  - Royal Society of Chemistry
T2  - Physical Chemistry Chemical Physics
T1  - Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry
SP  - 22078
EP  - 22095
VL  - 22
IS  - 38
DO  - 10.1039/D0CP03377D
UR  - https://hdl.handle.net/21.15107/rcub_dais_9544
ER  - 

@article{
author = "Rajić, Vladimir and Stojković Simatović, Ivana and Veselinović, Ljiljana and Belošević Čavor, Jelena and Novaković, Mirjana and Popović, Maja and Škapin, Srečo Davor and Mojović, Miloš and Stojadinović, Stevan and Rac, Vladislav and Janković Častvan, Ivona and Marković, Smilja",
year = "2020",
abstract = "Eco-friendly and rapid microwave processing of a precipitate was used to produce Fe-doped zinc oxide (Zn1−xFexO, x = 0, 0.05, 0.1, 0.15 and 0.20; ZnO:Fe) nanoparticles, which were tested as catalysts toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in a moderately alkaline solution. The phase composition, crystal structure, morphology, textural properties, surface chemistry, optical properties and band structure were examined to comprehend the influence of Zn2+ partial substitution with Fe3+ on the catalytic activity of ZnO:Fe. Linear sweep voltammetry showed an improved catalytic activity of ZnO:5Fe toward the ORR, compared to pure ZnO, while with increased amounts of the Fe-dopant the activity decreased. The improvement was suggested by a more positive onset potential (0.394 V vs. RHE), current density (0.231 mA cm−2 at 0.150 V vs. RHE), and faster kinetics (Tafel slope, b = 248 mV dec−1), and it may be due to the synergistic effect of (1) a sufficient amount of surface oxygen vacancies, and (2) a certain amount of plate-like particles composed of crystallites with well developed (0001) and (000) facets. Quite the contrary, the OER study showed that the introduction of Fe3+ ions into the ZnO crystal structure resulted in enhanced catalytic activity of all ZnO:Fe samples, compared to pure ZnO, probably due to the modified binding energy and an optimized band structure. With the maximal current density of 1.066 mA cm−2 at 2.216 V vs. RHE, an onset potential of 1.856 V vs. RHE, and the smallest potential difference between the OER and ORR (ΔE = 1.58 V), ZnO:10Fe may be considered a promising bifunctional catalyst toward the OER/ORR in moderately alkaline solution. This study demonstrates that the electrocatalytic activity of ZnO:Fe strongly depends on the defect chemistry and consequently the band structure. Along with providing fundamental insight into the electrocatalytic activity of ZnO:Fe, the study also indicates an optimal stoichiometry for enhanced bifunctional activity toward the OER/ORR, compared to pure ZnO.",
publisher = "Royal Society of Chemistry",
journal = "Physical Chemistry Chemical Physics",
title = "Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry",
pages = "22078-22095",
volume = "22",
number = "38",
doi = "10.1039/D0CP03377D",
url = "https://hdl.handle.net/21.15107/rcub_dais_9544"
}

Rajić, V., Stojković Simatović, I., Veselinović, L., Belošević Čavor, J., Novaković, M., Popović, M., Škapin, S. D., Mojović, M., Stojadinović, S., Rac, V., Janković Častvan, I.,& Marković, S.. (2020). Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry. in Physical Chemistry Chemical Physics
Royal Society of Chemistry., 22(38), 22078-22095.
https://doi.org/10.1039/D0CP03377D
https://hdl.handle.net/21.15107/rcub_dais_9544

Rajić V, Stojković Simatović I, Veselinović L, Belošević Čavor J, Novaković M, Popović M, Škapin SD, Mojović M, Stojadinović S, Rac V, Janković Častvan I, Marković S. Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry. in Physical Chemistry Chemical Physics. 2020;22(38):22078-22095.
doi:10.1039/D0CP03377D
https://hdl.handle.net/21.15107/rcub_dais_9544 .

Rajić, Vladimir, Stojković Simatović, Ivana, Veselinović, Ljiljana, Belošević Čavor, Jelena, Novaković, Mirjana, Popović, Maja, Škapin, Srečo Davor, Mojović, Miloš, Stojadinović, Stevan, Rac, Vladislav, Janković Častvan, Ivona, Marković, Smilja, "Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry" in Physical Chemistry Chemical Physics, 22, no. 38 (2020):22078-22095,
https://doi.org/10.1039/D0CP03377D .,
https://hdl.handle.net/21.15107/rcub_dais_9544 .

TY  - JOUR
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena
AU  - Vujančević, Jelena
AU  - Janković Častvan, Ivona
AU  - Ognjanović, M.
AU  - Tadić, Nenad B.
AU  - Stojadinović, Stevan
AU  - Branković, Goran
AU  - Nikolić, Maria Vesna
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/9107
AB  - The aim of this work was to synthesize semiconducting oxide nanoparticles using a simple method with low production cost to be applied in natural sunlight for photocatalytic degradation of pollutants in waste water. Iron titanate (Fe2TiO5) nanoparticles with an orthorhombic structure were successfully synthesized using a modified sol–gel method and calcination at 750°C. The as-prepared Fe2TiO5 nanoparticles exhibited a moderate specific surface area. The mesoporous Fe2TiO5 nanoparticles possessed strong absorption in the visible-light region and the band gap was estimated to be around 2.16 eV. The photocatalytic activity was evaluated by the degradation of methylene blue under natural sunlight. The effect of parameters such as the amount of catalyst, initial concentration of the dye and pH of the dye solution on the removal efficiency of methylene blue was investigated. Fe2TiO5 showed high degradation efficiency in a strong alkaline medium that can be the result of the facilitated formation of OH radicals due to an increased concentration of hydroxyl ions.
PB  - Royal Society
T2  - Royal Society Open Science
T1  - Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method
VL  - 7
IS  - 9
DO  - 10.1098/rsos.200708
UR  - https://hdl.handle.net/21.15107/rcub_dais_9107
ER  - 

@article{
author = "Vasiljević, Zorka Ž. and Dojčinović, Milena and Vujančević, Jelena and Janković Častvan, Ivona and Ognjanović, M. and Tadić, Nenad B. and Stojadinović, Stevan and Branković, Goran and Nikolić, Maria Vesna",
year = "2020",
abstract = "The aim of this work was to synthesize semiconducting oxide nanoparticles using a simple method with low production cost to be applied in natural sunlight for photocatalytic degradation of pollutants in waste water. Iron titanate (Fe2TiO5) nanoparticles with an orthorhombic structure were successfully synthesized using a modified sol–gel method and calcination at 750°C. The as-prepared Fe2TiO5 nanoparticles exhibited a moderate specific surface area. The mesoporous Fe2TiO5 nanoparticles possessed strong absorption in the visible-light region and the band gap was estimated to be around 2.16 eV. The photocatalytic activity was evaluated by the degradation of methylene blue under natural sunlight. The effect of parameters such as the amount of catalyst, initial concentration of the dye and pH of the dye solution on the removal efficiency of methylene blue was investigated. Fe2TiO5 showed high degradation efficiency in a strong alkaline medium that can be the result of the facilitated formation of OH radicals due to an increased concentration of hydroxyl ions.",
publisher = "Royal Society",
journal = "Royal Society Open Science",
title = "Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method",
volume = "7",
number = "9",
doi = "10.1098/rsos.200708",
url = "https://hdl.handle.net/21.15107/rcub_dais_9107"
}

Vasiljević, Z. Ž., Dojčinović, M., Vujančević, J., Janković Častvan, I., Ognjanović, M., Tadić, N. B., Stojadinović, S., Branković, G.,& Nikolić, M. V.. (2020). Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method. in Royal Society Open Science
Royal Society., 7(9).
https://doi.org/10.1098/rsos.200708
https://hdl.handle.net/21.15107/rcub_dais_9107

Vasiljević ZŽ, Dojčinović M, Vujančević J, Janković Častvan I, Ognjanović M, Tadić NB, Stojadinović S, Branković G, Nikolić MV. Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method. in Royal Society Open Science. 2020;7(9).
doi:10.1098/rsos.200708
https://hdl.handle.net/21.15107/rcub_dais_9107 .

Vasiljević, Zorka Ž., Dojčinović, Milena, Vujančević, Jelena, Janković Častvan, Ivona, Ognjanović, M., Tadić, Nenad B., Stojadinović, Stevan, Branković, Goran, Nikolić, Maria Vesna, "Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol–gel method" in Royal Society Open Science, 7, no. 9 (2020),
https://doi.org/10.1098/rsos.200708 .,
https://hdl.handle.net/21.15107/rcub_dais_9107 .

TY  - CONF
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena
AU  - Janković Častvan, Ivona
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Nikolić, Maria Vesna
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/6988
AB  - Fe2TiO5 nanopartcles were synthesized by modified sol-gel method with aid of
Fe(NO3)3 9H2O and Ti(OC3H7)4 as starting reagents, oxalic acid as chilate agent and cetyltrimethylammonium bromide as surfactant. The aim of this study was to asses the photocatalytic degradaton of the antibiotic Oxytetracycline (OTC) using visible light irradiation. As prepared nanoparticles were characterized by XRD, BET, FESEM and UV-vis DRS. The optimal operating conditions of oxytetracycline photocatalytic degradation were achived by changing the pH of the solution and changing the concentration of photocatalyst.
PB  - Novi Sad : Faculty of Technology
C3  - Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad
T1  - Structure and photocatalytic properties of sol-gel synthesized pseudobrookite
SP  - 133
EP  - 133
UR  - https://hdl.handle.net/21.15107/rcub_dais_6988
ER  - 

@conference{
author = "Vasiljević, Zorka Ž. and Dojčinović, Milena and Janković Častvan, Ivona and Vujančević, Jelena and Tadić, Nenad B. and Nikolić, Maria Vesna",
year = "2019",
abstract = "Fe2TiO5 nanopartcles were synthesized by modified sol-gel method with aid of
Fe(NO3)3 9H2O and Ti(OC3H7)4 as starting reagents, oxalic acid as chilate agent and cetyltrimethylammonium bromide as surfactant. The aim of this study was to asses the photocatalytic degradaton of the antibiotic Oxytetracycline (OTC) using visible light irradiation. As prepared nanoparticles were characterized by XRD, BET, FESEM and UV-vis DRS. The optimal operating conditions of oxytetracycline photocatalytic degradation were achived by changing the pH of the solution and changing the concentration of photocatalyst.",
publisher = "Novi Sad : Faculty of Technology",
journal = "Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad",
title = "Structure and photocatalytic properties of sol-gel synthesized pseudobrookite",
pages = "133-133",
url = "https://hdl.handle.net/21.15107/rcub_dais_6988"
}

Vasiljević, Z. Ž., Dojčinović, M., Janković Častvan, I., Vujančević, J., Tadić, N. B.,& Nikolić, M. V.. (2019). Structure and photocatalytic properties of sol-gel synthesized pseudobrookite. in Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad
Novi Sad : Faculty of Technology., 133-133.
https://hdl.handle.net/21.15107/rcub_dais_6988

Vasiljević ZŽ, Dojčinović M, Janković Častvan I, Vujančević J, Tadić NB, Nikolić MV. Structure and photocatalytic properties of sol-gel synthesized pseudobrookite. in Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad. 2019;:133-133.
https://hdl.handle.net/21.15107/rcub_dais_6988 .

Vasiljević, Zorka Ž., Dojčinović, Milena, Janković Častvan, Ivona, Vujančević, Jelena, Tadić, Nenad B., Nikolić, Maria Vesna, "Structure and photocatalytic properties of sol-gel synthesized pseudobrookite" in Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad (2019):133-133,
https://hdl.handle.net/21.15107/rcub_dais_6988 .

TY  - CONF
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena
AU  - Janković Častvan, Ivona
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Nikolić, Maria Vesna
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/6967
AB  - Fe2TiO5 nanoparticles were synthesized by modified sol-gel method using Fe(NO3)3×9H2O and Ti(OC3H7)4 as starting reagents, oxalic acid as chilate agent and cetyltrimethylammonium bromide as surfactant. The aim of this study was to asses the photocatalytic degradaton of water pollutants, methylene blue and the antibiotic Oxytetracycline (OTC) using natural sunlight irradiation. As prepared nanoparticles were characterized by XRD, BET, FESEM and UV-vis DRS. The optimal operating conditions of photocatalytic degradation of water pollutants were achived by changing the pH of the solution and changing the concentration of photocatalyst.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia
T1  - Photocatalytic degradation of methylene blue and oxytetracycline via sol-gel synthesized pseudobrookite
SP  - 70
EP  - 70
UR  - https://hdl.handle.net/21.15107/rcub_dais_6967
ER  - 

@conference{
author = "Vasiljević, Zorka Ž. and Dojčinović, Milena and Janković Častvan, Ivona and Vujančević, Jelena and Tadić, Nenad B. and Nikolić, Maria Vesna",
year = "2019",
abstract = "Fe2TiO5 nanoparticles were synthesized by modified sol-gel method using Fe(NO3)3×9H2O and Ti(OC3H7)4 as starting reagents, oxalic acid as chilate agent and cetyltrimethylammonium bromide as surfactant. The aim of this study was to asses the photocatalytic degradaton of water pollutants, methylene blue and the antibiotic Oxytetracycline (OTC) using natural sunlight irradiation. As prepared nanoparticles were characterized by XRD, BET, FESEM and UV-vis DRS. The optimal operating conditions of photocatalytic degradation of water pollutants were achived by changing the pH of the solution and changing the concentration of photocatalyst.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia",
title = "Photocatalytic degradation of methylene blue and oxytetracycline via sol-gel synthesized pseudobrookite",
pages = "70-70",
url = "https://hdl.handle.net/21.15107/rcub_dais_6967"
}

Vasiljević, Z. Ž., Dojčinović, M., Janković Častvan, I., Vujančević, J., Tadić, N. B.,& Nikolić, M. V.. (2019). Photocatalytic degradation of methylene blue and oxytetracycline via sol-gel synthesized pseudobrookite. in Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 70-70.
https://hdl.handle.net/21.15107/rcub_dais_6967

Vasiljević ZŽ, Dojčinović M, Janković Častvan I, Vujančević J, Tadić NB, Nikolić MV. Photocatalytic degradation of methylene blue and oxytetracycline via sol-gel synthesized pseudobrookite. in Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia. 2019;:70-70.
https://hdl.handle.net/21.15107/rcub_dais_6967 .

Vasiljević, Zorka Ž., Dojčinović, Milena, Janković Častvan, Ivona, Vujančević, Jelena, Tadić, Nenad B., Nikolić, Maria Vesna, "Photocatalytic degradation of methylene blue and oxytetracycline via sol-gel synthesized pseudobrookite" in Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia (2019):70-70,
https://hdl.handle.net/21.15107/rcub_dais_6967 .

TY  - JOUR
AU  - Nikolić, Irena
AU  - Marković, Smilja
AU  - Veselinović, Ljiljana
AU  - Radmilović, Vuk V.
AU  - Janković Častvan, Ivona
AU  - Radmilović, Velimir R.
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0167577X18315908
UR  - https://dais.sanu.ac.rs/123456789/4603
AB  - Pristine electric arc furnace slag (EAFS) as well as EAFS modified by alkali activation i.e. alkali activated slag (AAS) have found a novel application as adsorbents used in Cu2+ removal from sulfate solutions. The adsorption tests were carried in batch conditions and results have shown that alkali activation of EAFS enhances the Cu2+ adsorption. The adsorption process was found to follow a pseudo second-order kinetic model and occurs via formation of posnjakite (Cu4(SO4)(OH)6·H2O) on the surface of both, EAFS and AAS. Enhanced adsorption properties of AAS, compared to EAFS, are attributed to a more porous structure, larger specific surface area and an increased number of surface groups involved in the binding of Cu2+.
PB  - Elsevier
T2  - Materials Letters
T1  - Enhanced sorption of Cu2+ from sulfate solutions onto modified electric arc furnace slag
SP  - 184
EP  - 188
VL  - 235
DO  - 10.1016/j.matlet.2018.10.027
UR  - https://hdl.handle.net/21.15107/rcub_dais_4603
ER  - 

@article{
author = "Nikolić, Irena and Marković, Smilja and Veselinović, Ljiljana and Radmilović, Vuk V. and Janković Častvan, Ivona and Radmilović, Velimir R.",
year = "2019",
abstract = "Pristine electric arc furnace slag (EAFS) as well as EAFS modified by alkali activation i.e. alkali activated slag (AAS) have found a novel application as adsorbents used in Cu2+ removal from sulfate solutions. The adsorption tests were carried in batch conditions and results have shown that alkali activation of EAFS enhances the Cu2+ adsorption. The adsorption process was found to follow a pseudo second-order kinetic model and occurs via formation of posnjakite (Cu4(SO4)(OH)6·H2O) on the surface of both, EAFS and AAS. Enhanced adsorption properties of AAS, compared to EAFS, are attributed to a more porous structure, larger specific surface area and an increased number of surface groups involved in the binding of Cu2+.",
publisher = "Elsevier",
journal = "Materials Letters",
title = "Enhanced sorption of Cu2+ from sulfate solutions onto modified electric arc furnace slag",
pages = "184-188",
volume = "235",
doi = "10.1016/j.matlet.2018.10.027",
url = "https://hdl.handle.net/21.15107/rcub_dais_4603"
}

Nikolić, I., Marković, S., Veselinović, L., Radmilović, V. V., Janković Častvan, I.,& Radmilović, V. R.. (2019). Enhanced sorption of Cu2+ from sulfate solutions onto modified electric arc furnace slag. in Materials Letters
Elsevier., 235, 184-188.
https://doi.org/10.1016/j.matlet.2018.10.027
https://hdl.handle.net/21.15107/rcub_dais_4603

Nikolić I, Marković S, Veselinović L, Radmilović VV, Janković Častvan I, Radmilović VR. Enhanced sorption of Cu2+ from sulfate solutions onto modified electric arc furnace slag. in Materials Letters. 2019;235:184-188.
doi:10.1016/j.matlet.2018.10.027
https://hdl.handle.net/21.15107/rcub_dais_4603 .

Nikolić, Irena, Marković, Smilja, Veselinović, Ljiljana, Radmilović, Vuk V., Janković Častvan, Ivona, Radmilović, Velimir R., "Enhanced sorption of Cu2+ from sulfate solutions onto modified electric arc furnace slag" in Materials Letters, 235 (2019):184-188,
https://doi.org/10.1016/j.matlet.2018.10.027 .,
https://hdl.handle.net/21.15107/rcub_dais_4603 .

TY  - JOUR
AU  - Nikolić, Irena
AU  - Marković, Smilja
AU  - Veselinović, Ljiljana
AU  - Radmilović, Vuk V.
AU  - Janković Častvan, Ivona
AU  - Radmilović, Velimir R.
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0167577X18315908
UR  - https://dais.sanu.ac.rs/123456789/4551
AB  - Pristine electric arc furnace slag (EAFS) as well as EAFS modified by alkali activation i.e. alkali activated slag (AAS) have found a novel application as adsorbents used in Cu2+ removal from sulfate solutions. The adsorption tests were carried in batch conditions and results have shown that alkali activation of EAFS enhances the Cu2+ adsorption. The adsorption process was found to follow a pseudo second-order kinetic model and occurs via formation of posnjakite (Cu4(SO4)(OH)6·H2O) on the surface of both, EAFS and AAS. Enhanced adsorption properties of AAS, compared to EAFS, are attributed to a more porous structure, larger specific surface area and an increased number of surface groups involved in the binding of Cu2+.
PB  - Elsevier
T2  - Materials Letters
T1  - Enhanced sorption of Cu2+ from sulfate solutions onto modified electric arc furnace slag
SP  - 184
EP  - 188
VL  - 235
DO  - 10.1016/j.matlet.2018.10.027
UR  - https://hdl.handle.net/21.15107/rcub_dais_4551
ER  - 

@article{
author = "Nikolić, Irena and Marković, Smilja and Veselinović, Ljiljana and Radmilović, Vuk V. and Janković Častvan, Ivona and Radmilović, Velimir R.",
year = "2019",
abstract = "Pristine electric arc furnace slag (EAFS) as well as EAFS modified by alkali activation i.e. alkali activated slag (AAS) have found a novel application as adsorbents used in Cu2+ removal from sulfate solutions. The adsorption tests were carried in batch conditions and results have shown that alkali activation of EAFS enhances the Cu2+ adsorption. The adsorption process was found to follow a pseudo second-order kinetic model and occurs via formation of posnjakite (Cu4(SO4)(OH)6·H2O) on the surface of both, EAFS and AAS. Enhanced adsorption properties of AAS, compared to EAFS, are attributed to a more porous structure, larger specific surface area and an increased number of surface groups involved in the binding of Cu2+.",
publisher = "Elsevier",
journal = "Materials Letters",
title = "Enhanced sorption of Cu2+ from sulfate solutions onto modified electric arc furnace slag",
pages = "184-188",
volume = "235",
doi = "10.1016/j.matlet.2018.10.027",
url = "https://hdl.handle.net/21.15107/rcub_dais_4551"
}

Nikolić, I., Marković, S., Veselinović, L., Radmilović, V. V., Janković Častvan, I.,& Radmilović, V. R.. (2019). Enhanced sorption of Cu2+ from sulfate solutions onto modified electric arc furnace slag. in Materials Letters
Elsevier., 235, 184-188.
https://doi.org/10.1016/j.matlet.2018.10.027
https://hdl.handle.net/21.15107/rcub_dais_4551

Nikolić I, Marković S, Veselinović L, Radmilović VV, Janković Častvan I, Radmilović VR. Enhanced sorption of Cu2+ from sulfate solutions onto modified electric arc furnace slag. in Materials Letters. 2019;235:184-188.
doi:10.1016/j.matlet.2018.10.027
https://hdl.handle.net/21.15107/rcub_dais_4551 .

Nikolić, Irena, Marković, Smilja, Veselinović, Ljiljana, Radmilović, Vuk V., Janković Častvan, Ivona, Radmilović, Velimir R., "Enhanced sorption of Cu2+ from sulfate solutions onto modified electric arc furnace slag" in Materials Letters, 235 (2019):184-188,
https://doi.org/10.1016/j.matlet.2018.10.027 .,
https://hdl.handle.net/21.15107/rcub_dais_4551 .

TY  - JOUR
AU  - Marković, Smilja
AU  - Stojković Simatović, Ivana
AU  - Ahmetović, Sanita
AU  - Veselinović, Ljiljana
AU  - Stojadinović, Stevan
AU  - Rac, Vladislav
AU  - Škapin, Srečo Davor
AU  - Bajuk Bogdanović, Danica
AU  - Janković Častvan, Ivona
AU  - Uskoković, Dragan
PY  - 2019
UR  - https://pubs.rsc.org/en/content/articlelanding/2019/ra/c9ra02553g
UR  - https://dais.sanu.ac.rs/123456789/6272
AB  - ZnO nanopowders were produced using microwave processing of a precipitate and applied as a photoanode for photoelectrochemical water splitting. Two different surfactants, cetyltrimethylammonium bromide (CTAB) as the cationic and Pluronic F127 as the non-ionic one, were employed to in situ adjust the surface-to-bulk defect ratio in the ZnO crystal structure and further to modify the photo(electro)catalytic activity of the ZnO photoanode. The crystal structure, morphological, textural, optical and photo(electro)catalytic properties of ZnO particles were studied in detail to explain the profound effects of the surfactants on the photoanode activity. The ZnO/CTAB photoanode displayed the highest photocurrent density of 27 mA g−1, compared to ZnO (10.4 mA g−1) and ZnO/F127 photoanodes (20 mA g−1) at 1.5 V vs. SCE in 0.1 M Na2SO4 under visible illumination of 90 mW cm−2. A significant shift of the overpotential toward lower values was also observed when photoanodes were illuminated. The highest shift of the overpotential, from 1.296 to 0.248 V vs. SCE, was recorded when the ZnO/CTAB photanode was illuminated. The ZnO/CTAB photoanode provides efficient charge transfer across the electrode/electrolyte interface, with a longer lifetime of photogenerated electron–hole pairs and reduced possibility of charge recombination. The photoconversion efficiency was improved from 1.4% for ZnO and 0.9% for ZnO/F127 to 4.2% for ZnO/CTAB at 0.510 mV. A simple procedure for the synthesis of ZnO particles with improved photo(electro)catalytic properties was established and it was found that even a small amount of CTAB used during processing of ZnO increases the surface-to-bulk defect ratio. Optimization of the surface-to-bulk defect ratio in ZnO materials enables increase of the absorption capacity for visible light, rendering of the recombination rate of the photogenerated pair, as well as increase of both the photocurrent density and photoconversion efficiency.
PB  - Royal Society of Chemistry
T2  - RSC Advances
T1  - Surfactant-assisted microwave processing of ZnO particles: a simple way for designing the surface-to-bulk defect ratio and improving photo(electro)catalytic properties
SP  - 17165
EP  - 17178
VL  - 9
IS  - 30
DO  - 10.1039/C9RA02553G
UR  - https://hdl.handle.net/21.15107/rcub_dais_6272
ER  - 

@article{
author = "Marković, Smilja and Stojković Simatović, Ivana and Ahmetović, Sanita and Veselinović, Ljiljana and Stojadinović, Stevan and Rac, Vladislav and Škapin, Srečo Davor and Bajuk Bogdanović, Danica and Janković Častvan, Ivona and Uskoković, Dragan",
year = "2019",
abstract = "ZnO nanopowders were produced using microwave processing of a precipitate and applied as a photoanode for photoelectrochemical water splitting. Two different surfactants, cetyltrimethylammonium bromide (CTAB) as the cationic and Pluronic F127 as the non-ionic one, were employed to in situ adjust the surface-to-bulk defect ratio in the ZnO crystal structure and further to modify the photo(electro)catalytic activity of the ZnO photoanode. The crystal structure, morphological, textural, optical and photo(electro)catalytic properties of ZnO particles were studied in detail to explain the profound effects of the surfactants on the photoanode activity. The ZnO/CTAB photoanode displayed the highest photocurrent density of 27 mA g−1, compared to ZnO (10.4 mA g−1) and ZnO/F127 photoanodes (20 mA g−1) at 1.5 V vs. SCE in 0.1 M Na2SO4 under visible illumination of 90 mW cm−2. A significant shift of the overpotential toward lower values was also observed when photoanodes were illuminated. The highest shift of the overpotential, from 1.296 to 0.248 V vs. SCE, was recorded when the ZnO/CTAB photanode was illuminated. The ZnO/CTAB photoanode provides efficient charge transfer across the electrode/electrolyte interface, with a longer lifetime of photogenerated electron–hole pairs and reduced possibility of charge recombination. The photoconversion efficiency was improved from 1.4% for ZnO and 0.9% for ZnO/F127 to 4.2% for ZnO/CTAB at 0.510 mV. A simple procedure for the synthesis of ZnO particles with improved photo(electro)catalytic properties was established and it was found that even a small amount of CTAB used during processing of ZnO increases the surface-to-bulk defect ratio. Optimization of the surface-to-bulk defect ratio in ZnO materials enables increase of the absorption capacity for visible light, rendering of the recombination rate of the photogenerated pair, as well as increase of both the photocurrent density and photoconversion efficiency.",
publisher = "Royal Society of Chemistry",
journal = "RSC Advances",
title = "Surfactant-assisted microwave processing of ZnO particles: a simple way for designing the surface-to-bulk defect ratio and improving photo(electro)catalytic properties",
pages = "17165-17178",
volume = "9",
number = "30",
doi = "10.1039/C9RA02553G",
url = "https://hdl.handle.net/21.15107/rcub_dais_6272"
}

Marković, S., Stojković Simatović, I., Ahmetović, S., Veselinović, L., Stojadinović, S., Rac, V., Škapin, S. D., Bajuk Bogdanović, D., Janković Častvan, I.,& Uskoković, D.. (2019). Surfactant-assisted microwave processing of ZnO particles: a simple way for designing the surface-to-bulk defect ratio and improving photo(electro)catalytic properties. in RSC Advances
Royal Society of Chemistry., 9(30), 17165-17178.
https://doi.org/10.1039/C9RA02553G
https://hdl.handle.net/21.15107/rcub_dais_6272

Marković S, Stojković Simatović I, Ahmetović S, Veselinović L, Stojadinović S, Rac V, Škapin SD, Bajuk Bogdanović D, Janković Častvan I, Uskoković D. Surfactant-assisted microwave processing of ZnO particles: a simple way for designing the surface-to-bulk defect ratio and improving photo(electro)catalytic properties. in RSC Advances. 2019;9(30):17165-17178.
doi:10.1039/C9RA02553G
https://hdl.handle.net/21.15107/rcub_dais_6272 .

Marković, Smilja, Stojković Simatović, Ivana, Ahmetović, Sanita, Veselinović, Ljiljana, Stojadinović, Stevan, Rac, Vladislav, Škapin, Srečo Davor, Bajuk Bogdanović, Danica, Janković Častvan, Ivona, Uskoković, Dragan, "Surfactant-assisted microwave processing of ZnO particles: a simple way for designing the surface-to-bulk defect ratio and improving photo(electro)catalytic properties" in RSC Advances, 9, no. 30 (2019):17165-17178,
https://doi.org/10.1039/C9RA02553G .,
https://hdl.handle.net/21.15107/rcub_dais_6272 .

TY  - CONF
AU  - Dojčinović, Milena
AU  - Stojković Simatović, Ivana
AU  - Marković, Smilja
AU  - Janković Častvan, Ivona
AU  - Bajuk Bogdanović, Danica
AU  - Stojadinović, Stevan
AU  - Rac, Vladislav
AU  - Nikolić, Maria Vesna
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/6998
AB  - Zinc oxide is a semiconductor material which still, after a century of scientific research, shows great potential in modern day utilisements such as heterogenous photocatalysis of organic pollutants and as a photoanode material for efficient water splitting and oxygen generation. In this work zinc oxide was synthesized by a glycine-nitrate combustion process, which is a cheap, simple and efficient method for synthesizing transition metal oxides. The obtained powder was calcined at 400 and 500 °C and samples were characterized in detail using X-ray powder diffraction (XRPD), Fourier-trasform infrared spectroscopy (FTIR), Raman spectroscopy, field emission scanning electron microscopy (FESEM), photoluminescence spectroscopy (PL) and UV-Vis diffuse reflectance spectroscopy (DRS). Photoelectrocatalytic properties were investigated via electrochemical methods: linear voltammetry (LV), chronoamperometry (CA) and impedance spectroscopy (EIS). The results show that the obtained samples are nanocrystalline wurtzite zinc oxide with no impurities, with average particle diameters of 33 nm (annealed at 400 °C) and 48 nm (annealed at 500 °C). Both samples show significant amounts of various crystal deffects. The determined zinc oxide band gap was lower than the band gap of bulk zinc oxide. Photoelectrochemical measurements revealed that this material is photostable and reactive to light. Water oxidation is enhanced by exposing the light. Finally, photocatalytic properties were tested via determining kinetic parameters of organic pollutant decomposition. Both samples showed excellent photocatalytic activity by decomposing methylene blue and phenol.
PB  - Budapest : [s. n.]
C3  - Abstracts / International Workshop on Woman in Ceramic Science (WoCeram2019), April 7-9, 2019/ Budapest, Hungary, Novotel Danube Budapest
T1  - Structural, photocatalytic and photoelectrochemical characteristics of ZnO nanoparticles synthesized by a glycine-nitrate process
SP  - 16
EP  - 16
UR  - https://hdl.handle.net/21.15107/rcub_dais_6998
ER  - 

@conference{
author = "Dojčinović, Milena and Stojković Simatović, Ivana and Marković, Smilja and Janković Častvan, Ivona and Bajuk Bogdanović, Danica and Stojadinović, Stevan and Rac, Vladislav and Nikolić, Maria Vesna",
year = "2019",
abstract = "Zinc oxide is a semiconductor material which still, after a century of scientific research, shows great potential in modern day utilisements such as heterogenous photocatalysis of organic pollutants and as a photoanode material for efficient water splitting and oxygen generation. In this work zinc oxide was synthesized by a glycine-nitrate combustion process, which is a cheap, simple and efficient method for synthesizing transition metal oxides. The obtained powder was calcined at 400 and 500 °C and samples were characterized in detail using X-ray powder diffraction (XRPD), Fourier-trasform infrared spectroscopy (FTIR), Raman spectroscopy, field emission scanning electron microscopy (FESEM), photoluminescence spectroscopy (PL) and UV-Vis diffuse reflectance spectroscopy (DRS). Photoelectrocatalytic properties were investigated via electrochemical methods: linear voltammetry (LV), chronoamperometry (CA) and impedance spectroscopy (EIS). The results show that the obtained samples are nanocrystalline wurtzite zinc oxide with no impurities, with average particle diameters of 33 nm (annealed at 400 °C) and 48 nm (annealed at 500 °C). Both samples show significant amounts of various crystal deffects. The determined zinc oxide band gap was lower than the band gap of bulk zinc oxide. Photoelectrochemical measurements revealed that this material is photostable and reactive to light. Water oxidation is enhanced by exposing the light. Finally, photocatalytic properties were tested via determining kinetic parameters of organic pollutant decomposition. Both samples showed excellent photocatalytic activity by decomposing methylene blue and phenol.",
publisher = "Budapest : [s. n.]",
journal = "Abstracts / International Workshop on Woman in Ceramic Science (WoCeram2019), April 7-9, 2019/ Budapest, Hungary, Novotel Danube Budapest",
title = "Structural, photocatalytic and photoelectrochemical characteristics of ZnO nanoparticles synthesized by a glycine-nitrate process",
pages = "16-16",
url = "https://hdl.handle.net/21.15107/rcub_dais_6998"
}

Dojčinović, M., Stojković Simatović, I., Marković, S., Janković Častvan, I., Bajuk Bogdanović, D., Stojadinović, S., Rac, V.,& Nikolić, M. V.. (2019). Structural, photocatalytic and photoelectrochemical characteristics of ZnO nanoparticles synthesized by a glycine-nitrate process. in Abstracts / International Workshop on Woman in Ceramic Science (WoCeram2019), April 7-9, 2019/ Budapest, Hungary, Novotel Danube Budapest
Budapest : [s. n.]., 16-16.
https://hdl.handle.net/21.15107/rcub_dais_6998

Dojčinović M, Stojković Simatović I, Marković S, Janković Častvan I, Bajuk Bogdanović D, Stojadinović S, Rac V, Nikolić MV. Structural, photocatalytic and photoelectrochemical characteristics of ZnO nanoparticles synthesized by a glycine-nitrate process. in Abstracts / International Workshop on Woman in Ceramic Science (WoCeram2019), April 7-9, 2019/ Budapest, Hungary, Novotel Danube Budapest. 2019;:16-16.
https://hdl.handle.net/21.15107/rcub_dais_6998 .

Dojčinović, Milena, Stojković Simatović, Ivana, Marković, Smilja, Janković Častvan, Ivona, Bajuk Bogdanović, Danica, Stojadinović, Stevan, Rac, Vladislav, Nikolić, Maria Vesna, "Structural, photocatalytic and photoelectrochemical characteristics of ZnO nanoparticles synthesized by a glycine-nitrate process" in Abstracts / International Workshop on Woman in Ceramic Science (WoCeram2019), April 7-9, 2019/ Budapest, Hungary, Novotel Danube Budapest (2019):16-16,
https://hdl.handle.net/21.15107/rcub_dais_6998 .

TY  - DATA
AU  - Zdujić, Miodrag
AU  - Lukić, Ivana
AU  - Kesić, Željka
AU  - Janković-Častvan, Ivona
AU  - Marković, Smilja
AU  - Jovalekić, Čedomir
AU  - Skala, Dejan
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0921883119300615
UR  - https://dais.sanu.ac.rs/123456789/5974
AB  - The UV–vis diffuse reflectance (DRS) spectra and Kubelka-Munk transformed reflectance spectra of the samples calcined at 700 and 900 oC along
with starting CaO and SiO2 powders used for the synthesis
T2  - Advanced Powder Technology
T1  - Supporting information for the article: Zdujić, M., Lukić, I., Kesić, Ž., Janković-Častvan, I., Marković, S., Jovalekić, Č., Skala, D., 2019.  Synthesis  of  CaOSiO2  compounds  and  their  testing  as  heterogeneous  catalysts  for transesterification of sunflower oil. Advanced Powder Technology. https://doi.org/10.1016/j.apt.2019.03.009
UR  - https://hdl.handle.net/21.15107/rcub_dais_5974
ER  - 

@misc{
author = "Zdujić, Miodrag and Lukić, Ivana and Kesić, Željka and Janković-Častvan, Ivona and Marković, Smilja and Jovalekić, Čedomir and Skala, Dejan",
year = "2019",
abstract = "The UV–vis diffuse reflectance (DRS) spectra and Kubelka-Munk transformed reflectance spectra of the samples calcined at 700 and 900 oC along
with starting CaO and SiO2 powders used for the synthesis",
journal = "Advanced Powder Technology",
title = "Supporting information for the article: Zdujić, M., Lukić, I., Kesić, Ž., Janković-Častvan, I., Marković, S., Jovalekić, Č., Skala, D., 2019.  Synthesis  of  CaOSiO2  compounds  and  their  testing  as  heterogeneous  catalysts  for transesterification of sunflower oil. Advanced Powder Technology. https://doi.org/10.1016/j.apt.2019.03.009",
url = "https://hdl.handle.net/21.15107/rcub_dais_5974"
}

Zdujić, M., Lukić, I., Kesić, Ž., Janković-Častvan, I., Marković, S., Jovalekić, Č.,& Skala, D.. (2019). Supporting information for the article: Zdujić, M., Lukić, I., Kesić, Ž., Janković-Častvan, I., Marković, S., Jovalekić, Č., Skala, D., 2019.  Synthesis  of  CaOSiO2  compounds  and  their  testing  as  heterogeneous  catalysts  for transesterification of sunflower oil. Advanced Powder Technology. https://doi.org/10.1016/j.apt.2019.03.009. in Advanced Powder Technology.
https://hdl.handle.net/21.15107/rcub_dais_5974

Zdujić M, Lukić I, Kesić Ž, Janković-Častvan I, Marković S, Jovalekić Č, Skala D. Supporting information for the article: Zdujić, M., Lukić, I., Kesić, Ž., Janković-Častvan, I., Marković, S., Jovalekić, Č., Skala, D., 2019.  Synthesis  of  CaOSiO2  compounds  and  their  testing  as  heterogeneous  catalysts  for transesterification of sunflower oil. Advanced Powder Technology. https://doi.org/10.1016/j.apt.2019.03.009. in Advanced Powder Technology. 2019;.
https://hdl.handle.net/21.15107/rcub_dais_5974 .

Zdujić, Miodrag, Lukić, Ivana, Kesić, Željka, Janković-Častvan, Ivona, Marković, Smilja, Jovalekić, Čedomir, Skala, Dejan, "Supporting information for the article: Zdujić, M., Lukić, I., Kesić, Ž., Janković-Častvan, I., Marković, S., Jovalekić, Č., Skala, D., 2019.  Synthesis  of  CaOSiO2  compounds  and  their  testing  as  heterogeneous  catalysts  for transesterification of sunflower oil. Advanced Powder Technology. https://doi.org/10.1016/j.apt.2019.03.009" in Advanced Powder Technology (2019),
https://hdl.handle.net/21.15107/rcub_dais_5974 .

TY  - JOUR
AU  - Zdujić, Miodrag
AU  - Lukić, Ivana
AU  - Kesić, Željka
AU  - Janković-Častvan, Ivona
AU  - Marković, Smilja
AU  - Jovalekić, Čedomir
AU  - Skala, Dejan
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0921883119300615
UR  - https://dais.sanu.ac.rs/123456789/5802
AB  - The powder mixtures of calcium oxide (CaO) and silica gel (SiO2) in molar ratios of 1:1, 1.5:1, 2:1 and 3:1 were mechanochemically treated with the addition of water, and were subsequently calcined with a goal of synthesizing CaSiO3, Ca3Si2O7, Ca2SiO4 compounds and CaO/Ca2SiO4 two-phase mixture. The prepared materials were characterized by XRD, FTIR, SEM/EDS, particle size laser diffraction (PSLD), UV–vis diffuse reflectance spectroscopy (DRS), N2 adsorption/desorption isotherms, Hammett indicator for basic strength and volumetric analysis for free CaO content. The catalytic activity of calcium silicates with different Ca/Si ratios was tested in the transesterification of triacylglycerols (sunflower oil) with methanol. Samples obtained with initial composition 2CaO·SiO2 and 3CaO·SiO2 calcined at 700 °C, and 3CaO·SiO2 calcined at 900 °C had high catalytic activity, resulting with triacylglycerols conversion and fatty acids methyl ester formation (FAME or biodiesel) above 96%. The activity of these samples can be attributed to the existence of free CaO defined by CaO/Ca2SiO4 complex mixture. The effect of different amount of catalyst used for transesterification (0.2–2 wt%) was analyzed using the most active catalyst i.e. 3CaO·SiO2 calcined at 700 °C as well as possibility of its reuse for biodiesel synthesis. It was also found that CaSiO3, Ca3Si2O7 and Ca2SiO4, phases did not possess catalytic activity.
PB  - Elsevier
T2  - Advanced Powder Technology
T1  - Synthesis of CaOSiO2 compounds and their testing as heterogeneous catalysts for transesterification of sunflower oil
SP  - 1141
EP  - 1150
VL  - 30
IS  - 6
DO  - 10.1016/j.apt.2019.03.009
UR  - https://hdl.handle.net/21.15107/rcub_dais_5802
ER  - 

@article{
author = "Zdujić, Miodrag and Lukić, Ivana and Kesić, Željka and Janković-Častvan, Ivona and Marković, Smilja and Jovalekić, Čedomir and Skala, Dejan",
year = "2019",
abstract = "The powder mixtures of calcium oxide (CaO) and silica gel (SiO2) in molar ratios of 1:1, 1.5:1, 2:1 and 3:1 were mechanochemically treated with the addition of water, and were subsequently calcined with a goal of synthesizing CaSiO3, Ca3Si2O7, Ca2SiO4 compounds and CaO/Ca2SiO4 two-phase mixture. The prepared materials were characterized by XRD, FTIR, SEM/EDS, particle size laser diffraction (PSLD), UV–vis diffuse reflectance spectroscopy (DRS), N2 adsorption/desorption isotherms, Hammett indicator for basic strength and volumetric analysis for free CaO content. The catalytic activity of calcium silicates with different Ca/Si ratios was tested in the transesterification of triacylglycerols (sunflower oil) with methanol. Samples obtained with initial composition 2CaO·SiO2 and 3CaO·SiO2 calcined at 700 °C, and 3CaO·SiO2 calcined at 900 °C had high catalytic activity, resulting with triacylglycerols conversion and fatty acids methyl ester formation (FAME or biodiesel) above 96%. The activity of these samples can be attributed to the existence of free CaO defined by CaO/Ca2SiO4 complex mixture. The effect of different amount of catalyst used for transesterification (0.2–2 wt%) was analyzed using the most active catalyst i.e. 3CaO·SiO2 calcined at 700 °C as well as possibility of its reuse for biodiesel synthesis. It was also found that CaSiO3, Ca3Si2O7 and Ca2SiO4, phases did not possess catalytic activity.",
publisher = "Elsevier",
journal = "Advanced Powder Technology",
title = "Synthesis of CaOSiO2 compounds and their testing as heterogeneous catalysts for transesterification of sunflower oil",
pages = "1141-1150",
volume = "30",
number = "6",
doi = "10.1016/j.apt.2019.03.009",
url = "https://hdl.handle.net/21.15107/rcub_dais_5802"
}

Zdujić, M., Lukić, I., Kesić, Ž., Janković-Častvan, I., Marković, S., Jovalekić, Č.,& Skala, D.. (2019). Synthesis of CaOSiO2 compounds and their testing as heterogeneous catalysts for transesterification of sunflower oil. in Advanced Powder Technology
Elsevier., 30(6), 1141-1150.
https://doi.org/10.1016/j.apt.2019.03.009
https://hdl.handle.net/21.15107/rcub_dais_5802

Zdujić M, Lukić I, Kesić Ž, Janković-Častvan I, Marković S, Jovalekić Č, Skala D. Synthesis of CaOSiO2 compounds and their testing as heterogeneous catalysts for transesterification of sunflower oil. in Advanced Powder Technology. 2019;30(6):1141-1150.
doi:10.1016/j.apt.2019.03.009
https://hdl.handle.net/21.15107/rcub_dais_5802 .

Zdujić, Miodrag, Lukić, Ivana, Kesić, Željka, Janković-Častvan, Ivona, Marković, Smilja, Jovalekić, Čedomir, Skala, Dejan, "Synthesis of CaOSiO2 compounds and their testing as heterogeneous catalysts for transesterification of sunflower oil" in Advanced Powder Technology, 30, no. 6 (2019):1141-1150,
https://doi.org/10.1016/j.apt.2019.03.009 .,
https://hdl.handle.net/21.15107/rcub_dais_5802 .

TY  - JOUR
AU  - Zdujić, Miodrag
AU  - Lukić, Ivana
AU  - Kesić, Željka
AU  - Janković-Častvan, Ivona
AU  - Marković, Smilja
AU  - Jovalekić, Čedomir
AU  - Skala, Dejan
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0921883119300615
UR  - https://dais.sanu.ac.rs/123456789/5142
AB  - The powder mixtures of calcium oxide (CaO) and silica gel (SiO2) in molar ratios of 1:1, 1.5:1, 2:1 and 3:1 were mechanochemically treated with the addition of water, and were subsequently calcined with a goal of synthesizing CaSiO3, Ca3Si2O7, Ca2SiO4 compounds and CaO/Ca2SiO4 two-phase mixture. The prepared materials were characterized by XRD, FTIR, SEM/EDS, particle size laser diffraction (PSLD), UV–vis diffuse reflectance spectroscopy (DRS), N2 adsorption/desorption isotherms, Hammett indicator for basic strength and volumetric analysis for free CaO content. The catalytic activity of calcium silicates with different Ca/Si ratios was tested in the transesterification of triacylglycerols (sunflower oil) with methanol. Samples obtained with initial composition 2CaO·SiO2 and 3CaO·SiO2 calcined at 700 °C, and 3CaO·SiO2 calcined at 900 °C had high catalytic activity, resulting with triacylglycerols conversion and fatty acids methyl ester formation (FAME or biodiesel) above 96%. The activity of these samples can be attributed to the existence of free CaO defined by CaO/Ca2SiO4 complex mixture. The effect of different amount of catalyst used for transesterification (0.2–2 wt%) was analyzed using the most active catalyst i.e. 3CaO·SiO2 calcined at 700 °C as well as possibility of its reuse for biodiesel synthesis. It was also found that CaSiO3, Ca3Si2O7 and Ca2SiO4, phases did not possess catalytic activity.
PB  - Elsevier
T2  - Advanced Powder Technology
T1  - Synthesis of CaOSiO2 compounds and their testing as heterogeneous catalysts for transesterification of sunflower oil
SP  - 1141
EP  - 1150
VL  - 30
IS  - 6
DO  - 10.1016/j.apt.2019.03.009
UR  - https://hdl.handle.net/21.15107/rcub_dais_5142
ER  - 

@article{
author = "Zdujić, Miodrag and Lukić, Ivana and Kesić, Željka and Janković-Častvan, Ivona and Marković, Smilja and Jovalekić, Čedomir and Skala, Dejan",
year = "2019",
abstract = "The powder mixtures of calcium oxide (CaO) and silica gel (SiO2) in molar ratios of 1:1, 1.5:1, 2:1 and 3:1 were mechanochemically treated with the addition of water, and were subsequently calcined with a goal of synthesizing CaSiO3, Ca3Si2O7, Ca2SiO4 compounds and CaO/Ca2SiO4 two-phase mixture. The prepared materials were characterized by XRD, FTIR, SEM/EDS, particle size laser diffraction (PSLD), UV–vis diffuse reflectance spectroscopy (DRS), N2 adsorption/desorption isotherms, Hammett indicator for basic strength and volumetric analysis for free CaO content. The catalytic activity of calcium silicates with different Ca/Si ratios was tested in the transesterification of triacylglycerols (sunflower oil) with methanol. Samples obtained with initial composition 2CaO·SiO2 and 3CaO·SiO2 calcined at 700 °C, and 3CaO·SiO2 calcined at 900 °C had high catalytic activity, resulting with triacylglycerols conversion and fatty acids methyl ester formation (FAME or biodiesel) above 96%. The activity of these samples can be attributed to the existence of free CaO defined by CaO/Ca2SiO4 complex mixture. The effect of different amount of catalyst used for transesterification (0.2–2 wt%) was analyzed using the most active catalyst i.e. 3CaO·SiO2 calcined at 700 °C as well as possibility of its reuse for biodiesel synthesis. It was also found that CaSiO3, Ca3Si2O7 and Ca2SiO4, phases did not possess catalytic activity.",
publisher = "Elsevier",
journal = "Advanced Powder Technology",
title = "Synthesis of CaOSiO2 compounds and their testing as heterogeneous catalysts for transesterification of sunflower oil",
pages = "1141-1150",
volume = "30",
number = "6",
doi = "10.1016/j.apt.2019.03.009",
url = "https://hdl.handle.net/21.15107/rcub_dais_5142"
}

Zdujić, M., Lukić, I., Kesić, Ž., Janković-Častvan, I., Marković, S., Jovalekić, Č.,& Skala, D.. (2019). Synthesis of CaOSiO2 compounds and their testing as heterogeneous catalysts for transesterification of sunflower oil. in Advanced Powder Technology
Elsevier., 30(6), 1141-1150.
https://doi.org/10.1016/j.apt.2019.03.009
https://hdl.handle.net/21.15107/rcub_dais_5142

Zdujić M, Lukić I, Kesić Ž, Janković-Častvan I, Marković S, Jovalekić Č, Skala D. Synthesis of CaOSiO2 compounds and their testing as heterogeneous catalysts for transesterification of sunflower oil. in Advanced Powder Technology. 2019;30(6):1141-1150.
doi:10.1016/j.apt.2019.03.009
https://hdl.handle.net/21.15107/rcub_dais_5142 .

Zdujić, Miodrag, Lukić, Ivana, Kesić, Željka, Janković-Častvan, Ivona, Marković, Smilja, Jovalekić, Čedomir, Skala, Dejan, "Synthesis of CaOSiO2 compounds and their testing as heterogeneous catalysts for transesterification of sunflower oil" in Advanced Powder Technology, 30, no. 6 (2019):1141-1150,
https://doi.org/10.1016/j.apt.2019.03.009 .,
https://hdl.handle.net/21.15107/rcub_dais_5142 .

TY  - CONF
AU  - Gezović, Aleksandra
AU  - Vujković, Milica
AU  - Jugović, Dragana
AU  - Janković Častvan, Ivona
AU  - Stojković Simatović, Ivana
AU  - Mentus, Slavko
PY  - 2018
UR  - https://dais.sanu.ac.rs/123456789/4562
AB  - Na0.44MnO2 synthesized by glycine-nitrate method (GNM) was described in
this paper and it was characterized by X-ray powder diffraction (XRD) and
field-emission scanning electron microscopy (FE-SEM). Electrochemical
performances of Na0.44MnO2 were studied by cycling voltammetry (CV) at
various scan rates in NaNO3 and LiNO3 aqueous solutions in order to
compare the intercalation/deintercalation kinetics of Li+ and Na+ ions. The
initial discharge capacity was found to be 27.1 and 27.44 in the aqueous
solution of NaNO3 and LiNO3, respectively, and after 30 cycles its values
increased for 12% in both electrolytes.
PB  - Belgrade : Society of Physical Chemists of Serbia
C3  - Physical Chemistry 2018 : proceedings. Vol. 1 / 14th International Conference on Fundamental and Applied Aspects of Physical Chemistry, September 24-28, 2018
T1  - Synthesis, characterization and electrochemical properties of Na0.44MnO2 in NaNO3 and LiNO3 aqueous solution
SP  - 407
EP  - 410
UR  - https://hdl.handle.net/21.15107/rcub_dais_4562
ER  - 

@conference{
author = "Gezović, Aleksandra and Vujković, Milica and Jugović, Dragana and Janković Častvan, Ivona and Stojković Simatović, Ivana and Mentus, Slavko",
year = "2018",
abstract = "Na0.44MnO2 synthesized by glycine-nitrate method (GNM) was described in
this paper and it was characterized by X-ray powder diffraction (XRD) and
field-emission scanning electron microscopy (FE-SEM). Electrochemical
performances of Na0.44MnO2 were studied by cycling voltammetry (CV) at
various scan rates in NaNO3 and LiNO3 aqueous solutions in order to
compare the intercalation/deintercalation kinetics of Li+ and Na+ ions. The
initial discharge capacity was found to be 27.1 and 27.44 in the aqueous
solution of NaNO3 and LiNO3, respectively, and after 30 cycles its values
increased for 12% in both electrolytes.",
publisher = "Belgrade : Society of Physical Chemists of Serbia",
journal = "Physical Chemistry 2018 : proceedings. Vol. 1 / 14th International Conference on Fundamental and Applied Aspects of Physical Chemistry, September 24-28, 2018",
title = "Synthesis, characterization and electrochemical properties of Na0.44MnO2 in NaNO3 and LiNO3 aqueous solution",
pages = "407-410",
url = "https://hdl.handle.net/21.15107/rcub_dais_4562"
}

Gezović, A., Vujković, M., Jugović, D., Janković Častvan, I., Stojković Simatović, I.,& Mentus, S.. (2018). Synthesis, characterization and electrochemical properties of Na0.44MnO2 in NaNO3 and LiNO3 aqueous solution. in Physical Chemistry 2018 : proceedings. Vol. 1 / 14th International Conference on Fundamental and Applied Aspects of Physical Chemistry, September 24-28, 2018
Belgrade : Society of Physical Chemists of Serbia., 407-410.
https://hdl.handle.net/21.15107/rcub_dais_4562

Gezović A, Vujković M, Jugović D, Janković Častvan I, Stojković Simatović I, Mentus S. Synthesis, characterization and electrochemical properties of Na0.44MnO2 in NaNO3 and LiNO3 aqueous solution. in Physical Chemistry 2018 : proceedings. Vol. 1 / 14th International Conference on Fundamental and Applied Aspects of Physical Chemistry, September 24-28, 2018. 2018;:407-410.
https://hdl.handle.net/21.15107/rcub_dais_4562 .

Gezović, Aleksandra, Vujković, Milica, Jugović, Dragana, Janković Častvan, Ivona, Stojković Simatović, Ivana, Mentus, Slavko, "Synthesis, characterization and electrochemical properties of Na0.44MnO2 in NaNO3 and LiNO3 aqueous solution" in Physical Chemistry 2018 : proceedings. Vol. 1 / 14th International Conference on Fundamental and Applied Aspects of Physical Chemistry, September 24-28, 2018 (2018):407-410,
https://hdl.handle.net/21.15107/rcub_dais_4562 .

TY  - CONF
AU  - Gezović, Aleksandra
AU  - Vujković, Milica
AU  - Jugović, Dragana
AU  - Janković Častvan, Ivona
AU  - Stojković Simatović, Ivana
PY  - 2018
UR  - https://dais.sanu.ac.rs/123456789/4570
AB  - The application of rechargeable batteries is growing significantly and it became the nlost important field for largescale electric energy storage. While lithiuln-ion batteries (LIBs) have great commercial success, due to their large energy and power density, their application was limited because of the availability of lithiunl and its high cost. Sodiunl-ion batteries (SIBs) can be a promissing alternative due to the huge availability of sodium, its low price and similar intercalating electrochelnistry to LIBs. Among various Na-ion battery materials, low-cost and tunnel-type, Na0.44Mn02 (NMO) was regarded as one of the most pronlising cathode materials for sodium-ion batteries, because of its high theoretical specific capacity (122 rnA h g1) and good cyclability [2]. In this work, for the synthesis of NMO powder, rapid glycine-nitrate nlethod (GNM) was used, which, on the basis of the literature review, has not been used to synthesize this material so far.
PB  - Belgrade : Vinča Institute of Nuclear Sciences, University of Belgrade
PB  - Belgrade : Hydrogen Economy Initiative Serbia
C3  - Program and the Book of Abstracts / 3rd International Symposium on Materials for Energy Storage and Conversion - mESC-IS 2018
T1  - Na0.44Mn02 as a cathode material for aqueous sodium-ion batteries
SP  - 89
EP  - 89
UR  - https://hdl.handle.net/21.15107/rcub_dais_4570
ER  - 

@conference{
author = "Gezović, Aleksandra and Vujković, Milica and Jugović, Dragana and Janković Častvan, Ivona and Stojković Simatović, Ivana",
year = "2018",
abstract = "The application of rechargeable batteries is growing significantly and it became the nlost important field for largescale electric energy storage. While lithiuln-ion batteries (LIBs) have great commercial success, due to their large energy and power density, their application was limited because of the availability of lithiunl and its high cost. Sodiunl-ion batteries (SIBs) can be a promissing alternative due to the huge availability of sodium, its low price and similar intercalating electrochelnistry to LIBs. Among various Na-ion battery materials, low-cost and tunnel-type, Na0.44Mn02 (NMO) was regarded as one of the most pronlising cathode materials for sodium-ion batteries, because of its high theoretical specific capacity (122 rnA h g1) and good cyclability [2]. In this work, for the synthesis of NMO powder, rapid glycine-nitrate nlethod (GNM) was used, which, on the basis of the literature review, has not been used to synthesize this material so far.",
publisher = "Belgrade : Vinča Institute of Nuclear Sciences, University of Belgrade, Belgrade : Hydrogen Economy Initiative Serbia",
journal = "Program and the Book of Abstracts / 3rd International Symposium on Materials for Energy Storage and Conversion - mESC-IS 2018",
title = "Na0.44Mn02 as a cathode material for aqueous sodium-ion batteries",
pages = "89-89",
url = "https://hdl.handle.net/21.15107/rcub_dais_4570"
}

Gezović, A., Vujković, M., Jugović, D., Janković Častvan, I.,& Stojković Simatović, I.. (2018). Na0.44Mn02 as a cathode material for aqueous sodium-ion batteries. in Program and the Book of Abstracts / 3rd International Symposium on Materials for Energy Storage and Conversion - mESC-IS 2018
Belgrade : Vinča Institute of Nuclear Sciences, University of Belgrade., 89-89.
https://hdl.handle.net/21.15107/rcub_dais_4570

Gezović A, Vujković M, Jugović D, Janković Častvan I, Stojković Simatović I. Na0.44Mn02 as a cathode material for aqueous sodium-ion batteries. in Program and the Book of Abstracts / 3rd International Symposium on Materials for Energy Storage and Conversion - mESC-IS 2018. 2018;:89-89.
https://hdl.handle.net/21.15107/rcub_dais_4570 .

Gezović, Aleksandra, Vujković, Milica, Jugović, Dragana, Janković Častvan, Ivona, Stojković Simatović, Ivana, "Na0.44Mn02 as a cathode material for aqueous sodium-ion batteries" in Program and the Book of Abstracts / 3rd International Symposium on Materials for Energy Storage and Conversion - mESC-IS 2018 (2018):89-89,
https://hdl.handle.net/21.15107/rcub_dais_4570 .

TY  - CONF
AU  - Dojčinović, Milena
AU  - Marković, Smilja
AU  - Stojadinović, Stevan
AU  - Rac, Vladislav
AU  - Janković Častvan, Ivona
AU  - Stojković Simatović, Ivana
PY  - 2018
UR  - https://dais.sanu.ac.rs/123456789/4717
AB  - One of the ways to get rid of toxic organic compounds that industries release into natural waters is photocatalysis of the decomposition of organic compounds on the surface of heterogenous photocatalysts such as zinc oxide. Zinc oxide is a semiconductor that interacts with UV and near-UV visible light by generating electron-hole pairs which decompose organic molecules. Therefore it is useful to explore different ways of synthesizing zinc oxide and to test quality and quantity of organic decomposition photocatalysis so as to enable the commercial use of the material. Zinc oxide is also a respectable material for use as a photoelectrocatalyst in water oxidation, for example, which can be useful for generating oxygen while using natural sunlight - a clean and abundant energy source. In this project nanocrystalline zinc oxide was synthesized by glycin-nitrate combustion process and the powder was annealed on temperatures of 400 °C and 500 °C. Obtained particles where characterized in detail using X-ray powder diffraction (XRPD), Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, field emission scanning microscopy (FESEM), photoluminescence spectroscopy (PL) and diffuse reflectance spectroscopy (DRS). The results show that obtained samples are nanocrystalline wurtzite zinc oxide, with particle diameters of 33 nm (annealed at 400 °C) ad 48 nm (annealed at 500 °C). Both samples show significant amount of various crystal defects. Zinc oxide band gap of the samples are determined to be lower than the band gap of the bulk zinc oxide. Photoelectrocatalytic properties were investigated via electrochemical methods: linear voltammetry (LV), chronoamperometry (CA) and impedance spectroscopy (EIS). The results show that material is photostable and reactive to the light. Water oxidation is enhanced by exposing to sunlight. Finally, photocatalytic properties are tested with determining kinetic parameters of phenole and methyl blue decomposition. Zinc oxide nanoparticles are efficient photocatalysts, although sample annealed at 500 °C shows better properties than sample annealed at 400 °C.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia
T1  - Synthesis and characterisation of ZnO synthesized by glycine-nitrate combustion process
SP  - 78
EP  - 78
UR  - https://hdl.handle.net/21.15107/rcub_dais_4717
ER  - 

@conference{
author = "Dojčinović, Milena and Marković, Smilja and Stojadinović, Stevan and Rac, Vladislav and Janković Častvan, Ivona and Stojković Simatović, Ivana",
year = "2018",
abstract = "One of the ways to get rid of toxic organic compounds that industries release into natural waters is photocatalysis of the decomposition of organic compounds on the surface of heterogenous photocatalysts such as zinc oxide. Zinc oxide is a semiconductor that interacts with UV and near-UV visible light by generating electron-hole pairs which decompose organic molecules. Therefore it is useful to explore different ways of synthesizing zinc oxide and to test quality and quantity of organic decomposition photocatalysis so as to enable the commercial use of the material. Zinc oxide is also a respectable material for use as a photoelectrocatalyst in water oxidation, for example, which can be useful for generating oxygen while using natural sunlight - a clean and abundant energy source. In this project nanocrystalline zinc oxide was synthesized by glycin-nitrate combustion process and the powder was annealed on temperatures of 400 °C and 500 °C. Obtained particles where characterized in detail using X-ray powder diffraction (XRPD), Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, field emission scanning microscopy (FESEM), photoluminescence spectroscopy (PL) and diffuse reflectance spectroscopy (DRS). The results show that obtained samples are nanocrystalline wurtzite zinc oxide, with particle diameters of 33 nm (annealed at 400 °C) ad 48 nm (annealed at 500 °C). Both samples show significant amount of various crystal defects. Zinc oxide band gap of the samples are determined to be lower than the band gap of the bulk zinc oxide. Photoelectrocatalytic properties were investigated via electrochemical methods: linear voltammetry (LV), chronoamperometry (CA) and impedance spectroscopy (EIS). The results show that material is photostable and reactive to the light. Water oxidation is enhanced by exposing to sunlight. Finally, photocatalytic properties are tested with determining kinetic parameters of phenole and methyl blue decomposition. Zinc oxide nanoparticles are efficient photocatalysts, although sample annealed at 500 °C shows better properties than sample annealed at 400 °C.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia",
title = "Synthesis and characterisation of ZnO synthesized by glycine-nitrate combustion process",
pages = "78-78",
url = "https://hdl.handle.net/21.15107/rcub_dais_4717"
}

Dojčinović, M., Marković, S., Stojadinović, S., Rac, V., Janković Častvan, I.,& Stojković Simatović, I.. (2018). Synthesis and characterisation of ZnO synthesized by glycine-nitrate combustion process. in Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 78-78.
https://hdl.handle.net/21.15107/rcub_dais_4717

Dojčinović M, Marković S, Stojadinović S, Rac V, Janković Častvan I, Stojković Simatović I. Synthesis and characterisation of ZnO synthesized by glycine-nitrate combustion process. in Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia. 2018;:78-78.
https://hdl.handle.net/21.15107/rcub_dais_4717 .

Dojčinović, Milena, Marković, Smilja, Stojadinović, Stevan, Rac, Vladislav, Janković Častvan, Ivona, Stojković Simatović, Ivana, "Synthesis and characterisation of ZnO synthesized by glycine-nitrate combustion process" in Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia (2018):78-78,
https://hdl.handle.net/21.15107/rcub_dais_4717 .

TY  - CONF
AU  - Nikolić, Irena
AU  - Đurović, Dijana
AU  - Milašević, Ivana
AU  - Marković, Smilja
AU  - Veselinović, Ljiljana
AU  - Radmilović, Vuk V.
AU  - Janković Častvan, Ivona
AU  - Radmilović, Velimir R.
PY  - 2018
UR  - https://dais.sanu.ac.rs/123456789/3629
AB  - The removal of heavy metals from wastewaters is presently a global imperative primarily due to their well-known toxic nature and detrimental effects on the environment, and more importantly, on human health. Currently, special attention is paid to the use of novel slag based materials – alkali activated slag (AAS) as potential novel adsorbents. Our previous studies have shown that electric arc furnace slag (EAFS) can be successfully used as a precursor for the production of AAS. Generally, alkaline activation involves a chemical reaction between solid aluminosilicate materials and a highly alkaline activator. The alkali activation mechanism of slag involves the dissolution of slag in a highly alkaline, which is followed by the condensation and hardening processes. Dependent on the pH and type of alkaline activator, calcium (alumina) silicate hydrate or C–(A)–S–H gel has been identified as a reaction product of slag alkali activation. The objective of this research was to investigate the removal of Cu2+ from aquatic solution using alkali activated slag (AAS) obtained by alkaline activation of EAFS.
PB  - Belgrade : Serbian Academy of Sciences and Arts
C3  - Program and Book of Abstracts / First International Conference on Electron Microscopy of Nanostructures ELMINA 2018, August 27-29, 2018, Belgrade, Serbia
T1  - Alkali Activated Slag as Adsorbents for Cu2+ Removal from Wastewaters
SP  - 198
EP  - 200
UR  - https://hdl.handle.net/21.15107/rcub_dais_3629
ER  - 

@conference{
author = "Nikolić, Irena and Đurović, Dijana and Milašević, Ivana and Marković, Smilja and Veselinović, Ljiljana and Radmilović, Vuk V. and Janković Častvan, Ivona and Radmilović, Velimir R.",
year = "2018",
abstract = "The removal of heavy metals from wastewaters is presently a global imperative primarily due to their well-known toxic nature and detrimental effects on the environment, and more importantly, on human health. Currently, special attention is paid to the use of novel slag based materials – alkali activated slag (AAS) as potential novel adsorbents. Our previous studies have shown that electric arc furnace slag (EAFS) can be successfully used as a precursor for the production of AAS. Generally, alkaline activation involves a chemical reaction between solid aluminosilicate materials and a highly alkaline activator. The alkali activation mechanism of slag involves the dissolution of slag in a highly alkaline, which is followed by the condensation and hardening processes. Dependent on the pH and type of alkaline activator, calcium (alumina) silicate hydrate or C–(A)–S–H gel has been identified as a reaction product of slag alkali activation. The objective of this research was to investigate the removal of Cu2+ from aquatic solution using alkali activated slag (AAS) obtained by alkaline activation of EAFS.",
publisher = "Belgrade : Serbian Academy of Sciences and Arts",
journal = "Program and Book of Abstracts / First International Conference on Electron Microscopy of Nanostructures ELMINA 2018, August 27-29, 2018, Belgrade, Serbia",
title = "Alkali Activated Slag as Adsorbents for Cu2+ Removal from Wastewaters",
pages = "198-200",
url = "https://hdl.handle.net/21.15107/rcub_dais_3629"
}

Nikolić, I., Đurović, D., Milašević, I., Marković, S., Veselinović, L., Radmilović, V. V., Janković Častvan, I.,& Radmilović, V. R.. (2018). Alkali Activated Slag as Adsorbents for Cu2+ Removal from Wastewaters. in Program and Book of Abstracts / First International Conference on Electron Microscopy of Nanostructures ELMINA 2018, August 27-29, 2018, Belgrade, Serbia
Belgrade : Serbian Academy of Sciences and Arts., 198-200.
https://hdl.handle.net/21.15107/rcub_dais_3629

Nikolić I, Đurović D, Milašević I, Marković S, Veselinović L, Radmilović VV, Janković Častvan I, Radmilović VR. Alkali Activated Slag as Adsorbents for Cu2+ Removal from Wastewaters. in Program and Book of Abstracts / First International Conference on Electron Microscopy of Nanostructures ELMINA 2018, August 27-29, 2018, Belgrade, Serbia. 2018;:198-200.
https://hdl.handle.net/21.15107/rcub_dais_3629 .

Nikolić, Irena, Đurović, Dijana, Milašević, Ivana, Marković, Smilja, Veselinović, Ljiljana, Radmilović, Vuk V., Janković Častvan, Ivona, Radmilović, Velimir R., "Alkali Activated Slag as Adsorbents for Cu2+ Removal from Wastewaters" in Program and Book of Abstracts / First International Conference on Electron Microscopy of Nanostructures ELMINA 2018, August 27-29, 2018, Belgrade, Serbia (2018):198-200,
https://hdl.handle.net/21.15107/rcub_dais_3629 .

TY  - JOUR
AU  - Marković, Smilja
AU  - Stanković, Ana
AU  - Dostanić, Jasmina
AU  - Veselinović, Ljiljana
AU  - Mančić, Lidija
AU  - Škapin, Srečo Davor
AU  - Dražić, Goran
AU  - Janković Častvan, Ivona
AU  - Uskoković, Dragan
PY  - 2017
UR  - https://dais.sanu.ac.rs/123456789/2346
AB  - Mechanical milling of commercial ZnO and SnO2 was used to produce a ZnO/SnO2 composite with a high density of surface defects; in particular, zinc interstitials (Zni) and oxygen vacancies (VO). To determine the impact of surface defects on photocatalytic activity, the relative concentration ratio of bulk defects to surface defects was modified by annealing at 400 and 700 °C. The possible application of the ZnO/SnO2 composite as a natural sunlight and UV-light driven photocatalyst was revealed via de-colorization of methylene blue. In both cases the ZnO/SnO2 composite exhibited enhanced photocatalytic activity as compared to the pristine ZnO. In order to investigate the origin of the enhancement, the pristine metal oxides and composites were characterized using a variety of techniques, including X-ray diffraction (XRD), Raman and Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), laser diffraction particle size analysis, Brunauer–Emmett–Teller, UV-Vis diffuse reflectance and photoluminescence spectroscopy. High-resolution transmission electron microscopy (HRTEM) and elemental mapping analyses were used to reveal the presence of SnO2 nanocrystallites on the surface of larger ZnO particles. The enhanced photocatalytic activity of the composite can be attributed to the synergetic effect of the surface defects and the ZnO/SnO2 heterojunction particles, which facilitated charge separation, thereby hindering the recombination of photogenerated carriers. This study draws attention to mechanical activation as an inexpensive and environmentally friendly technique for the large-scale production of the composite with an enhanced photocatalytic activity under illumination of either UV or sunlight.
PB  - Royal Society of Chemistry
T2  - RSC Advances
T1  - Simultaneous enhancement of natural sunlight- and artificial UV-driven photocatalytic activity of a mechanically activated ZnO/SnO2 composite
SP  - 42725
EP  - 42737
VL  - 7
DO  - 10.1039/C7RA06895F
UR  - https://hdl.handle.net/21.15107/rcub_dais_2346
ER  - 

@article{
author = "Marković, Smilja and Stanković, Ana and Dostanić, Jasmina and Veselinović, Ljiljana and Mančić, Lidija and Škapin, Srečo Davor and Dražić, Goran and Janković Častvan, Ivona and Uskoković, Dragan",
year = "2017",
abstract = "Mechanical milling of commercial ZnO and SnO2 was used to produce a ZnO/SnO2 composite with a high density of surface defects; in particular, zinc interstitials (Zni) and oxygen vacancies (VO). To determine the impact of surface defects on photocatalytic activity, the relative concentration ratio of bulk defects to surface defects was modified by annealing at 400 and 700 °C. The possible application of the ZnO/SnO2 composite as a natural sunlight and UV-light driven photocatalyst was revealed via de-colorization of methylene blue. In both cases the ZnO/SnO2 composite exhibited enhanced photocatalytic activity as compared to the pristine ZnO. In order to investigate the origin of the enhancement, the pristine metal oxides and composites were characterized using a variety of techniques, including X-ray diffraction (XRD), Raman and Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), laser diffraction particle size analysis, Brunauer–Emmett–Teller, UV-Vis diffuse reflectance and photoluminescence spectroscopy. High-resolution transmission electron microscopy (HRTEM) and elemental mapping analyses were used to reveal the presence of SnO2 nanocrystallites on the surface of larger ZnO particles. The enhanced photocatalytic activity of the composite can be attributed to the synergetic effect of the surface defects and the ZnO/SnO2 heterojunction particles, which facilitated charge separation, thereby hindering the recombination of photogenerated carriers. This study draws attention to mechanical activation as an inexpensive and environmentally friendly technique for the large-scale production of the composite with an enhanced photocatalytic activity under illumination of either UV or sunlight.",
publisher = "Royal Society of Chemistry",
journal = "RSC Advances",
title = "Simultaneous enhancement of natural sunlight- and artificial UV-driven photocatalytic activity of a mechanically activated ZnO/SnO2 composite",
pages = "42725-42737",
volume = "7",
doi = "10.1039/C7RA06895F",
url = "https://hdl.handle.net/21.15107/rcub_dais_2346"
}

Marković, S., Stanković, A., Dostanić, J., Veselinović, L., Mančić, L., Škapin, S. D., Dražić, G., Janković Častvan, I.,& Uskoković, D.. (2017). Simultaneous enhancement of natural sunlight- and artificial UV-driven photocatalytic activity of a mechanically activated ZnO/SnO2 composite. in RSC Advances
Royal Society of Chemistry., 7, 42725-42737.
https://doi.org/10.1039/C7RA06895F
https://hdl.handle.net/21.15107/rcub_dais_2346

Marković S, Stanković A, Dostanić J, Veselinović L, Mančić L, Škapin SD, Dražić G, Janković Častvan I, Uskoković D. Simultaneous enhancement of natural sunlight- and artificial UV-driven photocatalytic activity of a mechanically activated ZnO/SnO2 composite. in RSC Advances. 2017;7:42725-42737.
doi:10.1039/C7RA06895F
https://hdl.handle.net/21.15107/rcub_dais_2346 .

Marković, Smilja, Stanković, Ana, Dostanić, Jasmina, Veselinović, Ljiljana, Mančić, Lidija, Škapin, Srečo Davor, Dražić, Goran, Janković Častvan, Ivona, Uskoković, Dragan, "Simultaneous enhancement of natural sunlight- and artificial UV-driven photocatalytic activity of a mechanically activated ZnO/SnO2 composite" in RSC Advances, 7 (2017):42725-42737,
https://doi.org/10.1039/C7RA06895F .,
https://hdl.handle.net/21.15107/rcub_dais_2346 .

TY  - JOUR
AU  - Nikolić, Irena
AU  - Marković, Smilja
AU  - Janković Častvan, Ivona
AU  - Radmilović, Vuk V.
AU  - Karanović, Ljiljana
AU  - Babić, Biljana M.
AU  - Radmilović, Velimir R.
PY  - 2016
UR  - https://dais.sanu.ac.rs/123456789/4639
AB  - Geopolymeric binders (GB) were produced using fly ash (FA) and electric arc furnace slag (EAFS). The slag has been added in the range of 0–40%. The effects of slag content on the strength, microstructure and thermal resistance were evaluated. It was found that the amount of EAFS up to 30% positively affects the strength evolution of GB. The main reaction product of FA/EAFS blends was amorphous N–(C)–A–S–H gel along with geopolymer-type gel (N–A–S–H). Thermal resistance of GB was considered from the standpoint of their mechanical and dimensional stability after heating in the temperature interval of 600–800 °C. The changes in mechanical and thermal properties of GB after heating are attributed to the changes in their structure. The results have shown that EAFS negatively affects the thermal resistance of GB above 600 °C due to the phase transition and morphological transformation of the amorphous gel phase.
PB  - Elsevier
T2  - Materials Letters
T1  - Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag
SP  - 301
EP  - 305
VL  - 176
DO  - 10.1016/j.matlet.2016.04.121
UR  - https://hdl.handle.net/21.15107/rcub_dais_4639
ER  - 

@article{
author = "Nikolić, Irena and Marković, Smilja and Janković Častvan, Ivona and Radmilović, Vuk V. and Karanović, Ljiljana and Babić, Biljana M. and Radmilović, Velimir R.",
year = "2016",
abstract = "Geopolymeric binders (GB) were produced using fly ash (FA) and electric arc furnace slag (EAFS). The slag has been added in the range of 0–40%. The effects of slag content on the strength, microstructure and thermal resistance were evaluated. It was found that the amount of EAFS up to 30% positively affects the strength evolution of GB. The main reaction product of FA/EAFS blends was amorphous N–(C)–A–S–H gel along with geopolymer-type gel (N–A–S–H). Thermal resistance of GB was considered from the standpoint of their mechanical and dimensional stability after heating in the temperature interval of 600–800 °C. The changes in mechanical and thermal properties of GB after heating are attributed to the changes in their structure. The results have shown that EAFS negatively affects the thermal resistance of GB above 600 °C due to the phase transition and morphological transformation of the amorphous gel phase.",
publisher = "Elsevier",
journal = "Materials Letters",
title = "Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag",
pages = "301-305",
volume = "176",
doi = "10.1016/j.matlet.2016.04.121",
url = "https://hdl.handle.net/21.15107/rcub_dais_4639"
}

Nikolić, I., Marković, S., Janković Častvan, I., Radmilović, V. V., Karanović, L., Babić, B. M.,& Radmilović, V. R.. (2016). Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag. in Materials Letters
Elsevier., 176, 301-305.
https://doi.org/10.1016/j.matlet.2016.04.121
https://hdl.handle.net/21.15107/rcub_dais_4639

Nikolić I, Marković S, Janković Častvan I, Radmilović VV, Karanović L, Babić BM, Radmilović VR. Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag. in Materials Letters. 2016;176:301-305.
doi:10.1016/j.matlet.2016.04.121
https://hdl.handle.net/21.15107/rcub_dais_4639 .

Nikolić, Irena, Marković, Smilja, Janković Častvan, Ivona, Radmilović, Vuk V., Karanović, Ljiljana, Babić, Biljana M., Radmilović, Velimir R., "Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag" in Materials Letters, 176 (2016):301-305,
https://doi.org/10.1016/j.matlet.2016.04.121 .,
https://hdl.handle.net/21.15107/rcub_dais_4639 .

TY  - JOUR
AU  - Nikolić, Irena
AU  - Marković, Smilja
AU  - Janković Častvan, Ivona
AU  - Radmilović, Vuk V.
AU  - Karanović, Ljiljana
AU  - Babić, Biljana M.
AU  - Radmilović, Velimir R.
PY  - 2016
UR  - https://dais.sanu.ac.rs/123456789/15992
AB  - Geopolymeric binders (GB) were produced using fly ash (FA) and electric arc furnace slag (EAFS). The slag has been added in the range of 0–40%. The effects of slag content on the strength, microstructure and thermal resistance were evaluated. It was found that the amount of EAFS up to 30% positively affects the strength evolution of GB. The main reaction product of FA/EAFS blends was amorphous N–(C)–A–S–H gel along with geopolymer-type gel (N–A–S–H). Thermal resistance of GB was considered from the standpoint of their mechanical and dimensional stability after heating in the temperature interval of 600–800 °C. The changes in mechanical and thermal properties of GB after heating are attributed to the changes in their structure. The results have shown that EAFS negatively affects the thermal resistance of GB above 600 °C due to the phase transition and morphological transformation of the amorphous gel phase.
PB  - Elsevier
T2  - Materials Letters
T1  - Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag
SP  - 301
EP  - 305
VL  - 176
DO  - 10.1016/j.matlet.2016.04.121
UR  - https://hdl.handle.net/21.15107/rcub_dais_15992
ER  - 

@article{
author = "Nikolić, Irena and Marković, Smilja and Janković Častvan, Ivona and Radmilović, Vuk V. and Karanović, Ljiljana and Babić, Biljana M. and Radmilović, Velimir R.",
year = "2016",
abstract = "Geopolymeric binders (GB) were produced using fly ash (FA) and electric arc furnace slag (EAFS). The slag has been added in the range of 0–40%. The effects of slag content on the strength, microstructure and thermal resistance were evaluated. It was found that the amount of EAFS up to 30% positively affects the strength evolution of GB. The main reaction product of FA/EAFS blends was amorphous N–(C)–A–S–H gel along with geopolymer-type gel (N–A–S–H). Thermal resistance of GB was considered from the standpoint of their mechanical and dimensional stability after heating in the temperature interval of 600–800 °C. The changes in mechanical and thermal properties of GB after heating are attributed to the changes in their structure. The results have shown that EAFS negatively affects the thermal resistance of GB above 600 °C due to the phase transition and morphological transformation of the amorphous gel phase.",
publisher = "Elsevier",
journal = "Materials Letters",
title = "Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag",
pages = "301-305",
volume = "176",
doi = "10.1016/j.matlet.2016.04.121",
url = "https://hdl.handle.net/21.15107/rcub_dais_15992"
}

Nikolić, I., Marković, S., Janković Častvan, I., Radmilović, V. V., Karanović, L., Babić, B. M.,& Radmilović, V. R.. (2016). Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag. in Materials Letters
Elsevier., 176, 301-305.
https://doi.org/10.1016/j.matlet.2016.04.121
https://hdl.handle.net/21.15107/rcub_dais_15992

Nikolić I, Marković S, Janković Častvan I, Radmilović VV, Karanović L, Babić BM, Radmilović VR. Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag. in Materials Letters. 2016;176:301-305.
doi:10.1016/j.matlet.2016.04.121
https://hdl.handle.net/21.15107/rcub_dais_15992 .

Nikolić, Irena, Marković, Smilja, Janković Častvan, Ivona, Radmilović, Vuk V., Karanović, Ljiljana, Babić, Biljana M., Radmilović, Velimir R., "Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag" in Materials Letters, 176 (2016):301-305,
https://doi.org/10.1016/j.matlet.2016.04.121 .,
https://hdl.handle.net/21.15107/rcub_dais_15992 .