TY  - CONF
AU  - Pejović, Predrag
AU  - Miljković, Nadica
AU  - Cvetanović, Miloš
AU  - Ševkušić, Milica
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/13399
AB  - U radu je dat prikaz osnovnih ideja slobodnog softvera i način njihove realizacije primenom odgovarajućih licenci, sa posebnim osvrtom na tehniku kopilefta. Razmotrena je generalizacija ideja slobodnog softvera na ostala dela kreativnog rada, a posebno na hardver,   sa   kratkim   osvrtom   na   odgovarajuće   licence primerene tim slučajevima. Naglašena je i obrazložena razlika između slobodnog i besplatnog softvera.
PB  - Beograd : Univerzitet u Beogradu, Elektrotehnički fakultet
PB  - Beograd : Akademska misao
C3  - Zbornik treće nacionalne konferencije sa međunarodnim učešćem pod nazivom Primena slobodnog softvera i otvorenog hardvera PSSOH 2020
T1  - Licence slobodnog softvera i otvorenog hardvera - kratko uputstvo za nestrpljive
T1  - Free Software and Open Hardware Licenses: A Short Guide for People in a Hurry
SP  - 7
EP  - 14
DO  - 10.5281/zenodo.4210351
UR  - https://hdl.handle.net/21.15107/rcub_dais_13399
ER  - 

@conference{
author = "Pejović, Predrag and Miljković, Nadica and Cvetanović, Miloš and Ševkušić, Milica",
year = "2021",
abstract = "U radu je dat prikaz osnovnih ideja slobodnog softvera i način njihove realizacije primenom odgovarajućih licenci, sa posebnim osvrtom na tehniku kopilefta. Razmotrena je generalizacija ideja slobodnog softvera na ostala dela kreativnog rada, a posebno na hardver,   sa   kratkim   osvrtom   na   odgovarajuće   licence primerene tim slučajevima. Naglašena je i obrazložena razlika između slobodnog i besplatnog softvera.",
publisher = "Beograd : Univerzitet u Beogradu, Elektrotehnički fakultet, Beograd : Akademska misao",
journal = "Zbornik treće nacionalne konferencije sa međunarodnim učešćem pod nazivom Primena slobodnog softvera i otvorenog hardvera PSSOH 2020",
title = "Licence slobodnog softvera i otvorenog hardvera - kratko uputstvo za nestrpljive, Free Software and Open Hardware Licenses: A Short Guide for People in a Hurry",
pages = "7-14",
doi = "10.5281/zenodo.4210351",
url = "https://hdl.handle.net/21.15107/rcub_dais_13399"
}

Pejović, P., Miljković, N., Cvetanović, M.,& Ševkušić, M.. (2021). Licence slobodnog softvera i otvorenog hardvera - kratko uputstvo za nestrpljive. in Zbornik treće nacionalne konferencije sa međunarodnim učešćem pod nazivom Primena slobodnog softvera i otvorenog hardvera PSSOH 2020
Beograd : Univerzitet u Beogradu, Elektrotehnički fakultet., 7-14.
https://doi.org/10.5281/zenodo.4210351
https://hdl.handle.net/21.15107/rcub_dais_13399

Pejović P, Miljković N, Cvetanović M, Ševkušić M. Licence slobodnog softvera i otvorenog hardvera - kratko uputstvo za nestrpljive. in Zbornik treće nacionalne konferencije sa međunarodnim učešćem pod nazivom Primena slobodnog softvera i otvorenog hardvera PSSOH 2020. 2021;:7-14.
doi:10.5281/zenodo.4210351
https://hdl.handle.net/21.15107/rcub_dais_13399 .

Pejović, Predrag, Miljković, Nadica, Cvetanović, Miloš, Ševkušić, Milica, "Licence slobodnog softvera i otvorenog hardvera - kratko uputstvo za nestrpljive" in Zbornik treće nacionalne konferencije sa međunarodnim učešćem pod nazivom Primena slobodnog softvera i otvorenog hardvera PSSOH 2020 (2021):7-14,
https://doi.org/10.5281/zenodo.4210351 .,
https://hdl.handle.net/21.15107/rcub_dais_13399 .

TY  - CONF
AU  - Cvetanović, Miloš
AU  - Bastić, Filip
AU  - Sirmić, Danijel
AU  - Mitić, Vojislav V.
AU  - Kocić, Ljubiša
AU  - Paunović, Vesna
AU  - Miljković, Miroslav
PY  - 2014
UR  - https://dais.sanu.ac.rs/123456789/608
AB  - Ceramics grain structure is difficult to describe by using traditional analytical methods based on Euclidean geometry. Using the fractal geometric/analytic methods instead, the new approach is offered in this paper. There are a many materials that can be doped to BaTiO3, in order to gain different characteristics and in this study we are using Ho2O3. Different concentrations has been used, as well as different sintering temperatures. For selected contacted grains, the SEM (Scanning Electron Microscope) pictures are taken providing suitable configuration for an electrical model study. It is shown that ferroelectric, optoelectric and piezoelectric properties, are influenced by fractal structure of grains and intergrains contacts, distribution of pores and inner dynamics during sintering process. Nowadays the material science is aware of importance of taking fractal properties of different ceramics and a new analytic and numerical models are suggested. The similar behavior is discovered in thin films and nano technologies as well.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014
T1  - BaTiO3 – ceramics and Fractal Microstructure Analyses
SP  - 104
EP  - 104
UR  - https://hdl.handle.net/21.15107/rcub_dais_608
ER  - 

@conference{
author = "Cvetanović, Miloš and Bastić, Filip and Sirmić, Danijel and Mitić, Vojislav V. and Kocić, Ljubiša and Paunović, Vesna and Miljković, Miroslav",
year = "2014",
abstract = "Ceramics grain structure is difficult to describe by using traditional analytical methods based on Euclidean geometry. Using the fractal geometric/analytic methods instead, the new approach is offered in this paper. There are a many materials that can be doped to BaTiO3, in order to gain different characteristics and in this study we are using Ho2O3. Different concentrations has been used, as well as different sintering temperatures. For selected contacted grains, the SEM (Scanning Electron Microscope) pictures are taken providing suitable configuration for an electrical model study. It is shown that ferroelectric, optoelectric and piezoelectric properties, are influenced by fractal structure of grains and intergrains contacts, distribution of pores and inner dynamics during sintering process. Nowadays the material science is aware of importance of taking fractal properties of different ceramics and a new analytic and numerical models are suggested. The similar behavior is discovered in thin films and nano technologies as well.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014",
title = "BaTiO3 – ceramics and Fractal Microstructure Analyses",
pages = "104-104",
url = "https://hdl.handle.net/21.15107/rcub_dais_608"
}

Cvetanović, M., Bastić, F., Sirmić, D., Mitić, V. V., Kocić, L., Paunović, V.,& Miljković, M.. (2014). BaTiO3 – ceramics and Fractal Microstructure Analyses. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014
Belgrade : Serbian Ceramic Society., 104-104.
https://hdl.handle.net/21.15107/rcub_dais_608

Cvetanović M, Bastić F, Sirmić D, Mitić VV, Kocić L, Paunović V, Miljković M. BaTiO3 – ceramics and Fractal Microstructure Analyses. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014. 2014;:104-104.
https://hdl.handle.net/21.15107/rcub_dais_608 .

Cvetanović, Miloš, Bastić, Filip, Sirmić, Danijel, Mitić, Vojislav V., Kocić, Ljubiša, Paunović, Vesna, Miljković, Miroslav, "BaTiO3 – ceramics and Fractal Microstructure Analyses" in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014 (2014):104-104,
https://hdl.handle.net/21.15107/rcub_dais_608 .

TY  - CONF
AU  - Sirmić, Danijel
AU  - Cvetanović, Miloš
AU  - Bastić, Filip
AU  - Mitić, Vojislav V.
AU  - Kocić, Ljubiša
AU  - Janković, S.
AU  - Paunović, Vesna
AU  - Miljković, Miroslav
PY  - 2014
UR  - https://dais.sanu.ac.rs/123456789/607
AB  - An influence of dopant concentration on microstructure and dielectric properties of doped BaTiO3-ceramics is developed based on fractal geometry. Using different technological parameters and different additives the structure of BaTiO3 based ceramics materials can be controlled. In this research, BaTiO3 samples with different concentration of Ho2O3 are used. The ratio of dopant concentration ranges from 0.05% to 1%. The sintering temperature of 1350°C is chosen. Selected specimens of BaTiO3 were documented using SEM (Scanning Electron Microscope) equipped with EDS analysis. As it is expected, the influence of impurities on intergranular capacity and other electrical properties is significant which is demonstrated and confirmed in this paper. Using the method of fractal modeling, a reconstruction of microstructure configurations, like grains shapes or intergranular contacts is performed. Such interdisciplinary research is important for opening new frontiers in electronics, and give us a fine perspective in dielectric materials. A merit of such perspective is definition of a bond between microelectronics and materials and components made for sensors and actuators.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014
T1  - The Ho2O3 Concentration Influence on BaTiO3 – ceramics Fractal Structures
SP  - 101
EP  - 101
UR  - https://hdl.handle.net/21.15107/rcub_dais_607
ER  - 

@conference{
author = "Sirmić, Danijel and Cvetanović, Miloš and Bastić, Filip and Mitić, Vojislav V. and Kocić, Ljubiša and Janković, S. and Paunović, Vesna and Miljković, Miroslav",
year = "2014",
abstract = "An influence of dopant concentration on microstructure and dielectric properties of doped BaTiO3-ceramics is developed based on fractal geometry. Using different technological parameters and different additives the structure of BaTiO3 based ceramics materials can be controlled. In this research, BaTiO3 samples with different concentration of Ho2O3 are used. The ratio of dopant concentration ranges from 0.05% to 1%. The sintering temperature of 1350°C is chosen. Selected specimens of BaTiO3 were documented using SEM (Scanning Electron Microscope) equipped with EDS analysis. As it is expected, the influence of impurities on intergranular capacity and other electrical properties is significant which is demonstrated and confirmed in this paper. Using the method of fractal modeling, a reconstruction of microstructure configurations, like grains shapes or intergranular contacts is performed. Such interdisciplinary research is important for opening new frontiers in electronics, and give us a fine perspective in dielectric materials. A merit of such perspective is definition of a bond between microelectronics and materials and components made for sensors and actuators.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014",
title = "The Ho2O3 Concentration Influence on BaTiO3 – ceramics Fractal Structures",
pages = "101-101",
url = "https://hdl.handle.net/21.15107/rcub_dais_607"
}

Sirmić, D., Cvetanović, M., Bastić, F., Mitić, V. V., Kocić, L., Janković, S., Paunović, V.,& Miljković, M.. (2014). The Ho2O3 Concentration Influence on BaTiO3 – ceramics Fractal Structures. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014
Belgrade : Serbian Ceramic Society., 101-101.
https://hdl.handle.net/21.15107/rcub_dais_607

Sirmić D, Cvetanović M, Bastić F, Mitić VV, Kocić L, Janković S, Paunović V, Miljković M. The Ho2O3 Concentration Influence on BaTiO3 – ceramics Fractal Structures. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014. 2014;:101-101.
https://hdl.handle.net/21.15107/rcub_dais_607 .

Sirmić, Danijel, Cvetanović, Miloš, Bastić, Filip, Mitić, Vojislav V., Kocić, Ljubiša, Janković, S., Paunović, Vesna, Miljković, Miroslav, "The Ho2O3 Concentration Influence on BaTiO3 – ceramics Fractal Structures" in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014 (2014):101-101,
https://hdl.handle.net/21.15107/rcub_dais_607 .

TY  - CONF
AU  - Bastić, Filip
AU  - Sirmić, Danijel
AU  - Cvetanović, Miloš
AU  - Mitić, Vojislav V.
AU  - Kocić, V. Lj.
AU  - Paunović, Vesna
PY  - 2014
UR  - https://dais.sanu.ac.rs/123456789/603
AB  - The structure of BaTiO3 based ceramics materials, can be controlled by using different pressing pressures, sintering temperatures and different additive concentrations. In this paper, microstructure properties of Ho2O3 doped BaTiO3-ceramics have been investigated. Different concentrations have been used, as well as different sintering temperatures. The ratio of dopant concentration ranges from 0.05% to 1%. Also, three different sintering temperatures are applied (1320°C, 1350°C and 1380°C). For selected contacted grains, the SEM (Scanning Electron Microscope), equipped with EDS (energy dispersive spectrometer) microphotographs are taken providing suitable configuration for structural and electrical model study. Analysis of SEM are twofold. The first one is based on conversion of 2D digital gray photos into numerical data, which represent 3D surface defined over dimensions of the microphotograph. The second analysis of fractal (box-counting) dimension direct calculation by using gray microphotographs graphical analyzing program is done. From above analysis, the important conclusions, are taken concerning the considered materials, from the frontiers view points, the ceramics structures prognosis within the electronic properties designing.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014
T1  - The Fractal Nature Grains Shape Reconstruction on the Way to Microstructure Prognosis
SP  - 67
EP  - 67
UR  - https://hdl.handle.net/21.15107/rcub_dais_603
ER  - 

@conference{
author = "Bastić, Filip and Sirmić, Danijel and Cvetanović, Miloš and Mitić, Vojislav V. and Kocić, V. Lj. and Paunović, Vesna",
year = "2014",
abstract = "The structure of BaTiO3 based ceramics materials, can be controlled by using different pressing pressures, sintering temperatures and different additive concentrations. In this paper, microstructure properties of Ho2O3 doped BaTiO3-ceramics have been investigated. Different concentrations have been used, as well as different sintering temperatures. The ratio of dopant concentration ranges from 0.05% to 1%. Also, three different sintering temperatures are applied (1320°C, 1350°C and 1380°C). For selected contacted grains, the SEM (Scanning Electron Microscope), equipped with EDS (energy dispersive spectrometer) microphotographs are taken providing suitable configuration for structural and electrical model study. Analysis of SEM are twofold. The first one is based on conversion of 2D digital gray photos into numerical data, which represent 3D surface defined over dimensions of the microphotograph. The second analysis of fractal (box-counting) dimension direct calculation by using gray microphotographs graphical analyzing program is done. From above analysis, the important conclusions, are taken concerning the considered materials, from the frontiers view points, the ceramics structures prognosis within the electronic properties designing.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014",
title = "The Fractal Nature Grains Shape Reconstruction on the Way to Microstructure Prognosis",
pages = "67-67",
url = "https://hdl.handle.net/21.15107/rcub_dais_603"
}

Bastić, F., Sirmić, D., Cvetanović, M., Mitić, V. V., Kocić, V. Lj.,& Paunović, V.. (2014). The Fractal Nature Grains Shape Reconstruction on the Way to Microstructure Prognosis. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014
Belgrade : Serbian Ceramic Society., 67-67.
https://hdl.handle.net/21.15107/rcub_dais_603

Bastić F, Sirmić D, Cvetanović M, Mitić VV, Kocić VL, Paunović V. The Fractal Nature Grains Shape Reconstruction on the Way to Microstructure Prognosis. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014. 2014;:67-67.
https://hdl.handle.net/21.15107/rcub_dais_603 .

Bastić, Filip, Sirmić, Danijel, Cvetanović, Miloš, Mitić, Vojislav V., Kocić, V. Lj., Paunović, Vesna, "The Fractal Nature Grains Shape Reconstruction on the Way to Microstructure Prognosis" in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / III Serbian Ceramic Society Conference, 29th September - 1st October, Belgrade, 2014 (2014):67-67,
https://hdl.handle.net/21.15107/rcub_dais_603 .