TY  - JOUR
AU  - Rafailović, Lidija D.
AU  - Jovanović, Aleksandar Z.
AU  - Gutić, Sanjin J.
AU  - Wehr, Jürgen
AU  - Rentenberger, Christian
AU  - Trišović, Tomislav
AU  - Pašti, Igor A.
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13567
AB  - The conductivity and the state of the surface of supports are of vital importance for metallization via electrodeposition. In this study, we show that the metallization of a carbon fiber-reinforced polymer (CFRP) can be carried out directly if the intermediate graphene oxide (GO) layer is chemically reduced on the CFRP surface. Notably, this approach utilizing only the chemically reduced GO as a conductive support allows us to obtain insights into the interaction of rGO and the electrodeposited metal. Our study reveals that under the same contact current experimental conditions, the electrodeposition of Cu and Ni on rGO follows significantly different deposition modes, resulting in the formation of three-dimensional (3D) and free-standing metallic foils, respectively. Considering that Ni adsorption energy is larger than Ni cohesive energy, it is expected that the adhesion of Ni on rGO@CFRP is enhanced compared to Cu. In contrast, the adhesion of deposited Ni is reduced, suggesting diffusion of H+ between rGO and CFRP, which promotes the hydrogen evolution reaction (HER) and results in the formation of free-standing Ni foils. We ascribe this phenomenon to the unique properties of rGO and the nature of Cu and Ni deposition from electrolytic baths. In the latter, the high adsorption energy of Ni on defective rGO along with HER is the key factor for the formation of the porous layer and free-standing foils. © 2022 The Authors. Published by American Chemical Society.
T2  - ACS Omega
T1  - New Insights into the Metallization of Graphene-Supported Composite Materials-from 3D Cu-Grown Structures to Free-Standing Electrodeposited Porous Ni Foils
SP  - 4352
EP  - 4362
VL  - 7
IS  - 5
DO  - 10.1021/acsomega.1c06145
UR  - https://hdl.handle.net/21.15107/rcub_dais_13567
ER  - 

@article{
author = "Rafailović, Lidija D. and Jovanović, Aleksandar Z. and Gutić, Sanjin J. and Wehr, Jürgen and Rentenberger, Christian and Trišović, Tomislav and Pašti, Igor A.",
year = "2022",
abstract = "The conductivity and the state of the surface of supports are of vital importance for metallization via electrodeposition. In this study, we show that the metallization of a carbon fiber-reinforced polymer (CFRP) can be carried out directly if the intermediate graphene oxide (GO) layer is chemically reduced on the CFRP surface. Notably, this approach utilizing only the chemically reduced GO as a conductive support allows us to obtain insights into the interaction of rGO and the electrodeposited metal. Our study reveals that under the same contact current experimental conditions, the electrodeposition of Cu and Ni on rGO follows significantly different deposition modes, resulting in the formation of three-dimensional (3D) and free-standing metallic foils, respectively. Considering that Ni adsorption energy is larger than Ni cohesive energy, it is expected that the adhesion of Ni on rGO@CFRP is enhanced compared to Cu. In contrast, the adhesion of deposited Ni is reduced, suggesting diffusion of H+ between rGO and CFRP, which promotes the hydrogen evolution reaction (HER) and results in the formation of free-standing Ni foils. We ascribe this phenomenon to the unique properties of rGO and the nature of Cu and Ni deposition from electrolytic baths. In the latter, the high adsorption energy of Ni on defective rGO along with HER is the key factor for the formation of the porous layer and free-standing foils. © 2022 The Authors. Published by American Chemical Society.",
journal = "ACS Omega",
title = "New Insights into the Metallization of Graphene-Supported Composite Materials-from 3D Cu-Grown Structures to Free-Standing Electrodeposited Porous Ni Foils",
pages = "4352-4362",
volume = "7",
number = "5",
doi = "10.1021/acsomega.1c06145",
url = "https://hdl.handle.net/21.15107/rcub_dais_13567"
}

Rafailović, L. D., Jovanović, A. Z., Gutić, S. J., Wehr, J., Rentenberger, C., Trišović, T.,& Pašti, I. A.. (2022). New Insights into the Metallization of Graphene-Supported Composite Materials-from 3D Cu-Grown Structures to Free-Standing Electrodeposited Porous Ni Foils. in ACS Omega, 7(5), 4352-4362.
https://doi.org/10.1021/acsomega.1c06145
https://hdl.handle.net/21.15107/rcub_dais_13567

Rafailović LD, Jovanović AZ, Gutić SJ, Wehr J, Rentenberger C, Trišović T, Pašti IA. New Insights into the Metallization of Graphene-Supported Composite Materials-from 3D Cu-Grown Structures to Free-Standing Electrodeposited Porous Ni Foils. in ACS Omega. 2022;7(5):4352-4362.
doi:10.1021/acsomega.1c06145
https://hdl.handle.net/21.15107/rcub_dais_13567 .

Rafailović, Lidija D., Jovanović, Aleksandar Z., Gutić, Sanjin J., Wehr, Jürgen, Rentenberger, Christian, Trišović, Tomislav, Pašti, Igor A., "New Insights into the Metallization of Graphene-Supported Composite Materials-from 3D Cu-Grown Structures to Free-Standing Electrodeposited Porous Ni Foils" in ACS Omega, 7, no. 5 (2022):4352-4362,
https://doi.org/10.1021/acsomega.1c06145 .,
https://hdl.handle.net/21.15107/rcub_dais_13567 .

TY  - CONF
AU  - Rafailović, Lidija D.
AU  - Gammer, Christoph
AU  - Trišović, Tomislav Lj.
AU  - Rentenberger, Christian
AU  - Jovanović, Aleksandar Z
AU  - Pašti, Igor A.
AU  - Gutić, Sanjin
AU  - Karnthaler, H. Peter
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12385
AB  - The discovery of nanostructured materials led to ground-breaking findings and significant technological advancement in recent years and is therefore attracting continuous attention from both, academia, and industry for a variety of structural and functional applications [1]. To design nanostructured materials with new functionalities, we combine electrochemical and electroless chemical synthesis with structural studies on different length scales including transmission electron microscopy. The possibility to produce nanostructured metals containing nanoscaled twins, both growth twins and deformation twins, is considered as a promising approach for the synthesis of novel high-performance materials in recent years [1]. Unfortunately, the phenomenon of twinning occurs only in certain metals, such as copper and until recently, it seemed impossible to make aluminium with a high density of grown-in twins. In the present work, we demonstrate the use of electrodeposition as synthesis method to make Al layers with a high density of genuine growth twins [2]. This unexpected result demonstrates a versatile and cost-effective nanoengineering technique for the formation of pure Al layers with a high density of twins. The atomic structure of a twin in aluminium is shown in a transmission electron microscopy image (cf. Fig. 1). In high density, these symmetric lattice imperfections can yield a material that shows good electrical properties, high hardness and good deformability. In addition, we show that electrochemical synthesis approaches can be used to create high surface area functionalized foams and ordered nanostructures for potential sensing and energy-related applications [3-6].
PB  - The Electrochemical Society
C3  - ECS Meeting Abstracts
C3  - International Journal of Sustainable Energy Planning and Management
T1  - Design of Nanostructured Materials By Electrochemical Approaches: [Invited]
SP  - 694
EP  - 694
VL  - MA2021-02
IS  - 18
DO  - 10.1149/MA2021-0218694mtgabs
UR  - https://hdl.handle.net/21.15107/rcub_dais_12385
ER  - 

@conference{
author = "Rafailović, Lidija D. and Gammer, Christoph and Trišović, Tomislav Lj. and Rentenberger, Christian and Jovanović, Aleksandar Z and Pašti, Igor A. and Gutić, Sanjin and Karnthaler, H. Peter",
year = "2021",
abstract = "The discovery of nanostructured materials led to ground-breaking findings and significant technological advancement in recent years and is therefore attracting continuous attention from both, academia, and industry for a variety of structural and functional applications [1]. To design nanostructured materials with new functionalities, we combine electrochemical and electroless chemical synthesis with structural studies on different length scales including transmission electron microscopy. The possibility to produce nanostructured metals containing nanoscaled twins, both growth twins and deformation twins, is considered as a promising approach for the synthesis of novel high-performance materials in recent years [1]. Unfortunately, the phenomenon of twinning occurs only in certain metals, such as copper and until recently, it seemed impossible to make aluminium with a high density of grown-in twins. In the present work, we demonstrate the use of electrodeposition as synthesis method to make Al layers with a high density of genuine growth twins [2]. This unexpected result demonstrates a versatile and cost-effective nanoengineering technique for the formation of pure Al layers with a high density of twins. The atomic structure of a twin in aluminium is shown in a transmission electron microscopy image (cf. Fig. 1). In high density, these symmetric lattice imperfections can yield a material that shows good electrical properties, high hardness and good deformability. In addition, we show that electrochemical synthesis approaches can be used to create high surface area functionalized foams and ordered nanostructures for potential sensing and energy-related applications [3-6].",
publisher = "The Electrochemical Society",
journal = "ECS Meeting Abstracts, International Journal of Sustainable Energy Planning and Management",
title = "Design of Nanostructured Materials By Electrochemical Approaches: [Invited]",
pages = "694-694",
volume = "MA2021-02",
number = "18",
doi = "10.1149/MA2021-0218694mtgabs",
url = "https://hdl.handle.net/21.15107/rcub_dais_12385"
}

Rafailović, L. D., Gammer, C., Trišović, T. Lj., Rentenberger, C., Jovanović, A. Z., Pašti, I. A., Gutić, S.,& Karnthaler, H. P.. (2021). Design of Nanostructured Materials By Electrochemical Approaches: [Invited]. in ECS Meeting Abstracts
The Electrochemical Society., MA2021-02(18), 694-694.
https://doi.org/10.1149/MA2021-0218694mtgabs
https://hdl.handle.net/21.15107/rcub_dais_12385

Rafailović LD, Gammer C, Trišović TL, Rentenberger C, Jovanović AZ, Pašti IA, Gutić S, Karnthaler HP. Design of Nanostructured Materials By Electrochemical Approaches: [Invited]. in ECS Meeting Abstracts. 2021;MA2021-02(18):694-694.
doi:10.1149/MA2021-0218694mtgabs
https://hdl.handle.net/21.15107/rcub_dais_12385 .

Rafailović, Lidija D., Gammer, Christoph, Trišović, Tomislav Lj., Rentenberger, Christian, Jovanović, Aleksandar Z, Pašti, Igor A., Gutić, Sanjin, Karnthaler, H. Peter, "Design of Nanostructured Materials By Electrochemical Approaches: [Invited]" in ECS Meeting Abstracts, MA2021-02, no. 18 (2021):694-694,
https://doi.org/10.1149/MA2021-0218694mtgabs .,
https://hdl.handle.net/21.15107/rcub_dais_12385 .

TY  - CONF
AU  - Trišović, Tomislav
AU  - Rafailović, Lidija D.
AU  - Grgur, Branimir
AU  - Milojević, Svetomir
AU  - Jugović, Branimir
AU  - Trišović, Zaga
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/14730
AB  - Tehnički razvoj civilizacje uslovljava sve veći broj uređaja i aparata koji nas okružuju a koje najčešće nismo u stanju da suštinski upoznamo principe njihovog rada. Zbog toga se takvi uređaji najčešće nepotpuno ili čak pogrešno koriste odnosno ne koriste se sve u optimalnim parametrima i u svim funkcijama za koje su projektovani. Nepoznavanje suštine rada pumpi i kompresora ima za posledicu da mnogi inženjeri ne znaju da pravilno odaberu tip pumpe i kompresora za pojedine uslove eksploatacije tj. transporta fluida. Posledica lošeg izbora ovih uređaja je povećana potrošnja energije za njihov rad, opterećenje mreže kuda fluid protiče, veliki ili nizak pritisak na željenim tačkama duž instalacije, smanjeno iskorišćenje i dr. Loš izbor takođe povlači nefunkcionalan rad i drugih uređaja koji zavise od rada pumpi i kompresora što za posledicu ima nekvalitetan proizvod ili uslugu koju zbirno ta oprema daje. Iz gore navedenih razloga napravljena je aparatura koja na jednostavan način demonstrira princip rada pumpi i kompresora. Aparatura na jednostavan način vizuelno prezentuje princip rada pumpi i kompresora, i na jednostavan način demonstrira kako se električna energja pretvara u energiju kretanja radnog kola pumpe a potom pretvara u potencijalnu, statičku i dinamičku energiju fluida nad kojim se vrši rad.
U ovom radu je pokazano da su izmerene H-Q krive u dobroj saglasnosti sa teorijskom Bernulijevom jednačinom. Na aparaturi se najbolje pokazuje funkcionalnost i primena Bernulijeve jednačine kao i njena detaljna analiza. Aparatura je namenjena svima koji imaju potrebu da se pravilno upoznaju sa tehničkim karakteristikama pumpi i kompresora i kako se te karakteristike mogu izmeriti.
AB  - The technical development of civilization is conditioned by the increasing number of devices and apparatus that surround us, which we are most often unable to substantially understand the principles of their operation. As a result, such devices are most often incompletely or even incorrectly used, or not all are used in optimal parameters and in all the functions for which they are designed. Unfamiliarity with the essence of the operation of pumps and compressors results in many engineers not knowing how to correctly select the type of pump and compressor for particular operating conditions, ie fluid transport. The consequence of poor selection of these devices is the increased energy consumption for their operation, the load on the network where the fluid flows, the high or low pressure at the desired points along the installation, reduced utilization, etc. Poor selection also entails dysfunctional operation of other devices that depend on the operation of pumps and compressors, resulting in a poor quality product or service provided by that equipment For the above reasons, an apparatus has been made that demonstrates the principle of operation of pumps and compressors in a simple manner. The apparatus visually presents the principle of operation of the pumps and compressors and demonstrates in a simple manner how electricity is converted into the energy of the pump impeller and then converted into the potential, static and dynamic energy of the fluid over which it is operated.
This paper shows that the measured H-Q curves are in good agreement with the theoretical Bernoulli equation. The functionality and application of Bernoulli's equation and its detailed analysis are best demonstrated on the apparatus. The apparatus is intended for all those who need to know properly the technical characteristics of pumps and compressors and how these characteristics can be measured.
PB  - Čačak : Univerzitet u Kragujevcu, Agronomski fakultet
C3  - Zbornik radova 2 / XXV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 13-14. mart 2020. godine
T1  - Aparatura za određivanje tehničkih karakteristika pumpi i kompresora
T1  - Apparatus for determining the technical characteristics of pumps and compressors
SP  - 495
EP  - 501
UR  - https://hdl.handle.net/21.15107/rcub_dais_14730
ER  - 

@conference{
author = "Trišović, Tomislav and Rafailović, Lidija D. and Grgur, Branimir and Milojević, Svetomir and Jugović, Branimir and Trišović, Zaga",
year = "2020",
abstract = "Tehnički razvoj civilizacje uslovljava sve veći broj uređaja i aparata koji nas okružuju a koje najčešće nismo u stanju da suštinski upoznamo principe njihovog rada. Zbog toga se takvi uređaji najčešće nepotpuno ili čak pogrešno koriste odnosno ne koriste se sve u optimalnim parametrima i u svim funkcijama za koje su projektovani. Nepoznavanje suštine rada pumpi i kompresora ima za posledicu da mnogi inženjeri ne znaju da pravilno odaberu tip pumpe i kompresora za pojedine uslove eksploatacije tj. transporta fluida. Posledica lošeg izbora ovih uređaja je povećana potrošnja energije za njihov rad, opterećenje mreže kuda fluid protiče, veliki ili nizak pritisak na željenim tačkama duž instalacije, smanjeno iskorišćenje i dr. Loš izbor takođe povlači nefunkcionalan rad i drugih uređaja koji zavise od rada pumpi i kompresora što za posledicu ima nekvalitetan proizvod ili uslugu koju zbirno ta oprema daje. Iz gore navedenih razloga napravljena je aparatura koja na jednostavan način demonstrira princip rada pumpi i kompresora. Aparatura na jednostavan način vizuelno prezentuje princip rada pumpi i kompresora, i na jednostavan način demonstrira kako se električna energja pretvara u energiju kretanja radnog kola pumpe a potom pretvara u potencijalnu, statičku i dinamičku energiju fluida nad kojim se vrši rad.
U ovom radu je pokazano da su izmerene H-Q krive u dobroj saglasnosti sa teorijskom Bernulijevom jednačinom. Na aparaturi se najbolje pokazuje funkcionalnost i primena Bernulijeve jednačine kao i njena detaljna analiza. Aparatura je namenjena svima koji imaju potrebu da se pravilno upoznaju sa tehničkim karakteristikama pumpi i kompresora i kako se te karakteristike mogu izmeriti., The technical development of civilization is conditioned by the increasing number of devices and apparatus that surround us, which we are most often unable to substantially understand the principles of their operation. As a result, such devices are most often incompletely or even incorrectly used, or not all are used in optimal parameters and in all the functions for which they are designed. Unfamiliarity with the essence of the operation of pumps and compressors results in many engineers not knowing how to correctly select the type of pump and compressor for particular operating conditions, ie fluid transport. The consequence of poor selection of these devices is the increased energy consumption for their operation, the load on the network where the fluid flows, the high or low pressure at the desired points along the installation, reduced utilization, etc. Poor selection also entails dysfunctional operation of other devices that depend on the operation of pumps and compressors, resulting in a poor quality product or service provided by that equipment For the above reasons, an apparatus has been made that demonstrates the principle of operation of pumps and compressors in a simple manner. The apparatus visually presents the principle of operation of the pumps and compressors and demonstrates in a simple manner how electricity is converted into the energy of the pump impeller and then converted into the potential, static and dynamic energy of the fluid over which it is operated.
This paper shows that the measured H-Q curves are in good agreement with the theoretical Bernoulli equation. The functionality and application of Bernoulli's equation and its detailed analysis are best demonstrated on the apparatus. The apparatus is intended for all those who need to know properly the technical characteristics of pumps and compressors and how these characteristics can be measured.",
publisher = "Čačak : Univerzitet u Kragujevcu, Agronomski fakultet",
journal = "Zbornik radova 2 / XXV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 13-14. mart 2020. godine",
title = "Aparatura za određivanje tehničkih karakteristika pumpi i kompresora, Apparatus for determining the technical characteristics of pumps and compressors",
pages = "495-501",
url = "https://hdl.handle.net/21.15107/rcub_dais_14730"
}

Trišović, T., Rafailović, L. D., Grgur, B., Milojević, S., Jugović, B.,& Trišović, Z.. (2020). Aparatura za određivanje tehničkih karakteristika pumpi i kompresora. in Zbornik radova 2 / XXV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 13-14. mart 2020. godine
Čačak : Univerzitet u Kragujevcu, Agronomski fakultet., 495-501.
https://hdl.handle.net/21.15107/rcub_dais_14730

Trišović T, Rafailović LD, Grgur B, Milojević S, Jugović B, Trišović Z. Aparatura za određivanje tehničkih karakteristika pumpi i kompresora. in Zbornik radova 2 / XXV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 13-14. mart 2020. godine. 2020;:495-501.
https://hdl.handle.net/21.15107/rcub_dais_14730 .

Trišović, Tomislav, Rafailović, Lidija D., Grgur, Branimir, Milojević, Svetomir, Jugović, Branimir, Trišović, Zaga, "Aparatura za određivanje tehničkih karakteristika pumpi i kompresora" in Zbornik radova 2 / XXV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 13-14. mart 2020. godine (2020):495-501,
https://hdl.handle.net/21.15107/rcub_dais_14730 .

TY  - JOUR
AU  - Grgur, Branimir
AU  - Trišović, Tomislav
AU  - Rafailović, Lidija
PY  - 2020
UR  - http://www.sciencedirect.com/science/article/pii/S1350630719320229
UR  - https://dais.sanu.ac.rs/123456789/9816
AB  - The corrosion of the transport tank materials made of stainless steel 316Ti is investigated in a solution containing 12–15% of the commercial sodium hypochlorite solution. Using the electrochemical techniques, weight loss measurements, and optical microscope, it is shown that corrosion occurs due to the metastable pitting. It is proposed that formed metal oxides corrosion product could catalyzed chemical decomposition of hypochlorite solution to oxygen, which provokes the positive shift of the corrosion potentials into the region of metastable pitting.
PB  - Elsevier
T2  - Engineering Failure Analysis
T1  - Corrosion of stainless steel 316Ti tank for the transport 12–15% of hypochlorite solution
SP  - 104768
VL  - 116
DO  - 10.1016/j.engfailanal.2020.104768
UR  - https://hdl.handle.net/21.15107/rcub_dais_9816
ER  - 

@article{
author = "Grgur, Branimir and Trišović, Tomislav and Rafailović, Lidija",
year = "2020",
abstract = "The corrosion of the transport tank materials made of stainless steel 316Ti is investigated in a solution containing 12–15% of the commercial sodium hypochlorite solution. Using the electrochemical techniques, weight loss measurements, and optical microscope, it is shown that corrosion occurs due to the metastable pitting. It is proposed that formed metal oxides corrosion product could catalyzed chemical decomposition of hypochlorite solution to oxygen, which provokes the positive shift of the corrosion potentials into the region of metastable pitting.",
publisher = "Elsevier",
journal = "Engineering Failure Analysis",
title = "Corrosion of stainless steel 316Ti tank for the transport 12–15% of hypochlorite solution",
pages = "104768",
volume = "116",
doi = "10.1016/j.engfailanal.2020.104768",
url = "https://hdl.handle.net/21.15107/rcub_dais_9816"
}

Grgur, B., Trišović, T.,& Rafailović, L.. (2020). Corrosion of stainless steel 316Ti tank for the transport 12–15% of hypochlorite solution. in Engineering Failure Analysis
Elsevier., 116, 104768.
https://doi.org/10.1016/j.engfailanal.2020.104768
https://hdl.handle.net/21.15107/rcub_dais_9816

Grgur B, Trišović T, Rafailović L. Corrosion of stainless steel 316Ti tank for the transport 12–15% of hypochlorite solution. in Engineering Failure Analysis. 2020;116:104768.
doi:10.1016/j.engfailanal.2020.104768
https://hdl.handle.net/21.15107/rcub_dais_9816 .

Grgur, Branimir, Trišović, Tomislav, Rafailović, Lidija, "Corrosion of stainless steel 316Ti tank for the transport 12–15% of hypochlorite solution" in Engineering Failure Analysis, 116 (2020):104768,
https://doi.org/10.1016/j.engfailanal.2020.104768 .,
https://hdl.handle.net/21.15107/rcub_dais_9816 .

TY  - CONF
AU  - Rafailović, Lidija D.
AU  - Gammer, Christoph
AU  - Trišović, Tomislav
AU  - Lutzer, Bernhard
AU  - Rentenberger, Christian
AU  - Jovanović, Aleksandar z.
AU  - Pašti, Igor
AU  - Karnthaler, Hans-Peter
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/7013
AB  - It is the aim of our work to carry out fundamental studies on designing and synthesizing high surface area functionalized foam and ordered structures for their potential sensing and energy related applications. We combine electrochemical synthesis with structural studies on different length scales including transmission electron microscopy. Templates are directly grown by electrodeposition, either by hydrogen bubble formation or by utilizing of ordered structures formed by anodic electrochemical oxidation. [1-3] We employed an elegant approach to obtain open, foam deposits of Ni and Ni alloys, by using electrodeposition at high current densities, to promote hydrogen evolution and bubble templating (cf. Fig.1). [1] In the next step, the high surface area of such materials was funtionalized by Pd utilizing galvanic displacement reaction. Electrochemical testing of the obtained open foam deposits shows promissing catalytical activity for hydrogen evolution in alkaline environments, as well as methanol and ethanol oxidation. In the case of fabrication of nanodendritic Ag simultaneously grown with porous anodic aluminium oxide we accomplished well anchored dendritic Ag nanostructures [2] of long-term stability [3].
1. L. D. Rafailović, C. Gammer, C. Rentenberger, T. Trišović, C. Kleber, H. P. Karnthaler, Nano Energy, 2 (2012) 523 https://doi.org/10.1016/j.nanoen.2012.12.004
2. L.D. Rafailovic, C. Gammer, C. Rentenberger, T. Trisovic, C. Kleber, H.P. Karnthaler, Adv. Mater. 27 (2015) 6438 https://doi.org/10.1002/adma.201502451
3. L.D. Rafailovic, C. Gammer, J. Srajer, T. Trisovic, J. Rahel, H.P. Karnthaler; RSC Adv., 6 (2016) 33348, https://doi.org/10.1039/c5ra26632g
PB  - International Association of Physical Chemists
C3  - Book of abstracts / 7th Regional Symposium on Electrochemistry – South East Europe & 8th Kurt Schwabe Symposium, Split, Croatia, May 27-30, 2019
T1  - Electrochemical approaches in synthesis of high surface area materials
SP  - 35
EP  - 35
UR  - https://hdl.handle.net/21.15107/rcub_dais_7013
ER  - 

@conference{
author = "Rafailović, Lidija D. and Gammer, Christoph and Trišović, Tomislav and Lutzer, Bernhard and Rentenberger, Christian and Jovanović, Aleksandar z. and Pašti, Igor and Karnthaler, Hans-Peter",
year = "2019",
abstract = "It is the aim of our work to carry out fundamental studies on designing and synthesizing high surface area functionalized foam and ordered structures for their potential sensing and energy related applications. We combine electrochemical synthesis with structural studies on different length scales including transmission electron microscopy. Templates are directly grown by electrodeposition, either by hydrogen bubble formation or by utilizing of ordered structures formed by anodic electrochemical oxidation. [1-3] We employed an elegant approach to obtain open, foam deposits of Ni and Ni alloys, by using electrodeposition at high current densities, to promote hydrogen evolution and bubble templating (cf. Fig.1). [1] In the next step, the high surface area of such materials was funtionalized by Pd utilizing galvanic displacement reaction. Electrochemical testing of the obtained open foam deposits shows promissing catalytical activity for hydrogen evolution in alkaline environments, as well as methanol and ethanol oxidation. In the case of fabrication of nanodendritic Ag simultaneously grown with porous anodic aluminium oxide we accomplished well anchored dendritic Ag nanostructures [2] of long-term stability [3].
1. L. D. Rafailović, C. Gammer, C. Rentenberger, T. Trišović, C. Kleber, H. P. Karnthaler, Nano Energy, 2 (2012) 523 https://doi.org/10.1016/j.nanoen.2012.12.004
2. L.D. Rafailovic, C. Gammer, C. Rentenberger, T. Trisovic, C. Kleber, H.P. Karnthaler, Adv. Mater. 27 (2015) 6438 https://doi.org/10.1002/adma.201502451
3. L.D. Rafailovic, C. Gammer, J. Srajer, T. Trisovic, J. Rahel, H.P. Karnthaler; RSC Adv., 6 (2016) 33348, https://doi.org/10.1039/c5ra26632g",
publisher = "International Association of Physical Chemists",
journal = "Book of abstracts / 7th Regional Symposium on Electrochemistry – South East Europe & 8th Kurt Schwabe Symposium, Split, Croatia, May 27-30, 2019",
title = "Electrochemical approaches in synthesis of high surface area materials",
pages = "35-35",
url = "https://hdl.handle.net/21.15107/rcub_dais_7013"
}

Rafailović, L. D., Gammer, C., Trišović, T., Lutzer, B., Rentenberger, C., Jovanović, A. z., Pašti, I.,& Karnthaler, H.. (2019). Electrochemical approaches in synthesis of high surface area materials. in Book of abstracts / 7th Regional Symposium on Electrochemistry – South East Europe & 8th Kurt Schwabe Symposium, Split, Croatia, May 27-30, 2019
International Association of Physical Chemists., 35-35.
https://hdl.handle.net/21.15107/rcub_dais_7013

Rafailović LD, Gammer C, Trišović T, Lutzer B, Rentenberger C, Jovanović AZ, Pašti I, Karnthaler H. Electrochemical approaches in synthesis of high surface area materials. in Book of abstracts / 7th Regional Symposium on Electrochemistry – South East Europe & 8th Kurt Schwabe Symposium, Split, Croatia, May 27-30, 2019. 2019;:35-35.
https://hdl.handle.net/21.15107/rcub_dais_7013 .

Rafailović, Lidija D., Gammer, Christoph, Trišović, Tomislav, Lutzer, Bernhard, Rentenberger, Christian, Jovanović, Aleksandar z., Pašti, Igor, Karnthaler, Hans-Peter, "Electrochemical approaches in synthesis of high surface area materials" in Book of abstracts / 7th Regional Symposium on Electrochemistry – South East Europe & 8th Kurt Schwabe Symposium, Split, Croatia, May 27-30, 2019 (2019):35-35,
https://hdl.handle.net/21.15107/rcub_dais_7013 .

TY  - CONF
AU  - Rafailović, Lidija D.
AU  - Gammer, Christoph
AU  - Trišović, Tomislav
AU  - Retenberger, Christian
AU  - Jovanović, Aleksandar Z.
AU  - Pašti, Igor
AU  - Karnthaler, Hans-Peter
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/7014
AB  - Extended conference abstract
PB  - Belgrade : Serbian Society for Microscopy
PB  - Belgrade : Institute for Biological Research "Siniša Stanković"
C3  - MCM2019 : proceedings / 14th Multinational Congress on Microscopy, [September 15–20, 2019, Belgrade, Serbia]
T1  - Electrochemical approaches to design materials for potential sensing and energy related applications
SP  - 466
EP  - 467
UR  - https://hdl.handle.net/21.15107/rcub_dais_7014
ER  - 

@conference{
author = "Rafailović, Lidija D. and Gammer, Christoph and Trišović, Tomislav and Retenberger, Christian and Jovanović, Aleksandar Z. and Pašti, Igor and Karnthaler, Hans-Peter",
year = "2019",
abstract = "Extended conference abstract",
publisher = "Belgrade : Serbian Society for Microscopy, Belgrade : Institute for Biological Research "Siniša Stanković"",
journal = "MCM2019 : proceedings / 14th Multinational Congress on Microscopy, [September 15–20, 2019, Belgrade, Serbia]",
title = "Electrochemical approaches to design materials for potential sensing and energy related applications",
pages = "466-467",
url = "https://hdl.handle.net/21.15107/rcub_dais_7014"
}

Rafailović, L. D., Gammer, C., Trišović, T., Retenberger, C., Jovanović, A. Z., Pašti, I.,& Karnthaler, H.. (2019). Electrochemical approaches to design materials for potential sensing and energy related applications. in MCM2019 : proceedings / 14th Multinational Congress on Microscopy, [September 15–20, 2019, Belgrade, Serbia]
Belgrade : Serbian Society for Microscopy., 466-467.
https://hdl.handle.net/21.15107/rcub_dais_7014

Rafailović LD, Gammer C, Trišović T, Retenberger C, Jovanović AZ, Pašti I, Karnthaler H. Electrochemical approaches to design materials for potential sensing and energy related applications. in MCM2019 : proceedings / 14th Multinational Congress on Microscopy, [September 15–20, 2019, Belgrade, Serbia]. 2019;:466-467.
https://hdl.handle.net/21.15107/rcub_dais_7014 .

Rafailović, Lidija D., Gammer, Christoph, Trišović, Tomislav, Retenberger, Christian, Jovanović, Aleksandar Z., Pašti, Igor, Karnthaler, Hans-Peter, "Electrochemical approaches to design materials for potential sensing and energy related applications" in MCM2019 : proceedings / 14th Multinational Congress on Microscopy, [September 15–20, 2019, Belgrade, Serbia] (2019):466-467,
https://hdl.handle.net/21.15107/rcub_dais_7014 .

TY  - CONF
AU  - Trišović, Tomislav
AU  - Rafailović, Lidija D.
AU  - Grgur, Branimir
AU  - Milojević, Svetomir
AU  - Nikolić, Milan P.
AU  - Trišović, Zaga
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/7016
AB  - Globalno zagrevanje i porast prosečne temperature doveli su do pojave cijanobakterija posebno u stajaćim vodama. Posebnu opasnost za zdravlje su toksini koje ove bakterije proizvode usled neadakvatnog tretmana. Razni toksini mogu izazvati osip na koži, mogu dovesti do raka jetre, a neki od njih su jaki neurotoksini. Iz ovih razloga neophodno je da se cijanobakterije uklone pre nego dodju u pogon finalne prerade vode. Rezultati laboratorijskih ispitivanja na cijanobakterije posle tretmana cevovoda sprovedeni u Zavodu za javno zdravlje Srbije i laboratorija JKP Beogradski vodovod pokazali su posle izvršenih procesa čišćenja, pranja i dezinfekcije znacajno smanjenje broja cijanobakterija. Pokazano je da je KMnO4 efikasno sredstvo za suzbijanje cijanobakterija u koncentraciji do 25 mg/l.
AB  - It was noticed worldwide that nutrient enrichment and climatic change as global warming and hydrologic changes with periods of more intense droughts strongly affect cyanobacterial growth. Toxigenic cyanobacteria that can produce a wide range of cyanotoxins (hepato-, neuro-, dermatotoxins) are one of the major health risks humans and animals are exposed to via drinking water. Therefore, it is important to remove the cyanobacteria before the water comes to a plant for a final treatment. Results of laboratory examination carried out by National Public Health Institution of Serbia and Belgrade Waterworks and Sewerage shows significant reduction of number of cyanobacteria aftre our treatment with KMnO4. The efficiency of the treament is the highest when concentration of KMnO4 was 25 mg/l.
PB  - Čačak : Univerzitet u Kragujevcu, Agronomski fakultet
C3  - Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine
T1  - Pranje i dezinfekcija vodovodne mreže na relaciji Ušće Zemun – Piramida Novi Beograd
T1  - Cleaning and Desinfection a Part of Water Suplly System Ušće Zemun – Piramida New Belgrade
SP  - 827
EP  - 833
UR  - https://hdl.handle.net/21.15107/rcub_dais_7016
ER  - 

@conference{
author = "Trišović, Tomislav and Rafailović, Lidija D. and Grgur, Branimir and Milojević, Svetomir and Nikolić, Milan P. and Trišović, Zaga",
year = "2019",
abstract = "Globalno zagrevanje i porast prosečne temperature doveli su do pojave cijanobakterija posebno u stajaćim vodama. Posebnu opasnost za zdravlje su toksini koje ove bakterije proizvode usled neadakvatnog tretmana. Razni toksini mogu izazvati osip na koži, mogu dovesti do raka jetre, a neki od njih su jaki neurotoksini. Iz ovih razloga neophodno je da se cijanobakterije uklone pre nego dodju u pogon finalne prerade vode. Rezultati laboratorijskih ispitivanja na cijanobakterije posle tretmana cevovoda sprovedeni u Zavodu za javno zdravlje Srbije i laboratorija JKP Beogradski vodovod pokazali su posle izvršenih procesa čišćenja, pranja i dezinfekcije znacajno smanjenje broja cijanobakterija. Pokazano je da je KMnO4 efikasno sredstvo za suzbijanje cijanobakterija u koncentraciji do 25 mg/l., It was noticed worldwide that nutrient enrichment and climatic change as global warming and hydrologic changes with periods of more intense droughts strongly affect cyanobacterial growth. Toxigenic cyanobacteria that can produce a wide range of cyanotoxins (hepato-, neuro-, dermatotoxins) are one of the major health risks humans and animals are exposed to via drinking water. Therefore, it is important to remove the cyanobacteria before the water comes to a plant for a final treatment. Results of laboratory examination carried out by National Public Health Institution of Serbia and Belgrade Waterworks and Sewerage shows significant reduction of number of cyanobacteria aftre our treatment with KMnO4. The efficiency of the treament is the highest when concentration of KMnO4 was 25 mg/l.",
publisher = "Čačak : Univerzitet u Kragujevcu, Agronomski fakultet",
journal = "Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine",
title = "Pranje i dezinfekcija vodovodne mreže na relaciji Ušće Zemun – Piramida Novi Beograd, Cleaning and Desinfection a Part of Water Suplly System Ušće Zemun – Piramida New Belgrade",
pages = "827-833",
url = "https://hdl.handle.net/21.15107/rcub_dais_7016"
}

Trišović, T., Rafailović, L. D., Grgur, B., Milojević, S., Nikolić, M. P.,& Trišović, Z.. (2019). Pranje i dezinfekcija vodovodne mreže na relaciji Ušće Zemun – Piramida Novi Beograd. in Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine
Čačak : Univerzitet u Kragujevcu, Agronomski fakultet., 827-833.
https://hdl.handle.net/21.15107/rcub_dais_7016

Trišović T, Rafailović LD, Grgur B, Milojević S, Nikolić MP, Trišović Z. Pranje i dezinfekcija vodovodne mreže na relaciji Ušće Zemun – Piramida Novi Beograd. in Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine. 2019;:827-833.
https://hdl.handle.net/21.15107/rcub_dais_7016 .

Trišović, Tomislav, Rafailović, Lidija D., Grgur, Branimir, Milojević, Svetomir, Nikolić, Milan P., Trišović, Zaga, "Pranje i dezinfekcija vodovodne mreže na relaciji Ušće Zemun – Piramida Novi Beograd" in Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine (2019):827-833,
https://hdl.handle.net/21.15107/rcub_dais_7016 .

TY  - CONF
AU  - Trišović, Tomislav
AU  - Grgur, Branimir
AU  - Rafailović, Lidija D.
AU  - Popović, Milica
AU  - Trišović, Zaga
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/7019
AB  - U radu je prikazan postupak za čišćenje i dezinfekciju vode u bunarima velikih kapaciteta Beogradskog vodovoda. Tipičan primer bunara velikih kapaciteta je Reni bunar 2 i 4 koji su locirani na 50m od leve obale Save u neposrednoj blizini ušća Save u Dunav. Bunari su dubine oko 30m, prečnika 4 m i sadrže oko 300 m3 vode i sa horizontalnim drenovima dužine 50m. Prezentovan je jednostavan i jeftin način za hiperdezinfekciju bunarskog dna i bunarske vertikale. Takođe je pokušano da se tretiraju i unutrašnjost drenova koji napajaju ovakve bunare.
AB  - We show in this work the treatment procedure utilized for cleaning and desnfection of water in water wells of large capacity as in the case of wells of Belgrade Waterworks. The typical examples of such well of large capacity are Reni wells 2 i 4 located 50m from the left bank of the river Sava and in close geometrical distance of confluence of Save river into the Danube. The depth of wells is around 30 m, diamaeter of around 4 m with approximat content of 300 m3 of water. In this work, we demonstate a simple but innovative approach for the disinfection of the well bottom, vertical areas along the well and inner inlets that pump in the water into the well.
PB  - Čačak : Univerzitet u Kragujevcu, Agronomski fakultet
C3  - Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine
T1  - Hiperdezinfekcija bunara za vodosnabdevanje tipa Reni
T1  - Washing and Desinfection of the Wells Type Reni
SP  - 835
EP  - 844
UR  - https://hdl.handle.net/21.15107/rcub_dais_7019
ER  - 

@conference{
author = "Trišović, Tomislav and Grgur, Branimir and Rafailović, Lidija D. and Popović, Milica and Trišović, Zaga",
year = "2019",
abstract = "U radu je prikazan postupak za čišćenje i dezinfekciju vode u bunarima velikih kapaciteta Beogradskog vodovoda. Tipičan primer bunara velikih kapaciteta je Reni bunar 2 i 4 koji su locirani na 50m od leve obale Save u neposrednoj blizini ušća Save u Dunav. Bunari su dubine oko 30m, prečnika 4 m i sadrže oko 300 m3 vode i sa horizontalnim drenovima dužine 50m. Prezentovan je jednostavan i jeftin način za hiperdezinfekciju bunarskog dna i bunarske vertikale. Takođe je pokušano da se tretiraju i unutrašnjost drenova koji napajaju ovakve bunare., We show in this work the treatment procedure utilized for cleaning and desnfection of water in water wells of large capacity as in the case of wells of Belgrade Waterworks. The typical examples of such well of large capacity are Reni wells 2 i 4 located 50m from the left bank of the river Sava and in close geometrical distance of confluence of Save river into the Danube. The depth of wells is around 30 m, diamaeter of around 4 m with approximat content of 300 m3 of water. In this work, we demonstate a simple but innovative approach for the disinfection of the well bottom, vertical areas along the well and inner inlets that pump in the water into the well.",
publisher = "Čačak : Univerzitet u Kragujevcu, Agronomski fakultet",
journal = "Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine",
title = "Hiperdezinfekcija bunara za vodosnabdevanje tipa Reni, Washing and Desinfection of the Wells Type Reni",
pages = "835-844",
url = "https://hdl.handle.net/21.15107/rcub_dais_7019"
}

Trišović, T., Grgur, B., Rafailović, L. D., Popović, M.,& Trišović, Z.. (2019). Hiperdezinfekcija bunara za vodosnabdevanje tipa Reni. in Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine
Čačak : Univerzitet u Kragujevcu, Agronomski fakultet., 835-844.
https://hdl.handle.net/21.15107/rcub_dais_7019

Trišović T, Grgur B, Rafailović LD, Popović M, Trišović Z. Hiperdezinfekcija bunara za vodosnabdevanje tipa Reni. in Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine. 2019;:835-844.
https://hdl.handle.net/21.15107/rcub_dais_7019 .

Trišović, Tomislav, Grgur, Branimir, Rafailović, Lidija D., Popović, Milica, Trišović, Zaga, "Hiperdezinfekcija bunara za vodosnabdevanje tipa Reni" in Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine (2019):835-844,
https://hdl.handle.net/21.15107/rcub_dais_7019 .

TY  - JOUR
AU  - Trišović, Tomislav
AU  - Spasojević, Miroslav D.
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Rafailović, Lidija D.
PY  - 2016
UR  - https://dais.sanu.ac.rs/123456789/2326
AB  - The most common disinfectants for water treatment are based on chlorine and its compounds. Practically, water treatments with chlorine compounds have no alternative, since they provide, in comparison to other effective processes such as ozonization or ultraviolet irradiation, high residual disinfection capacity. Unfortunately, all of chlorine-based compounds for disinfection tend to degrade during storage, thus reducing the concentration of active chlorine. Apart from degradation, additional problems are transportation, storage and handling of such hazardous compounds. Nowadays, a lot of attention is paid to the development of electrochemical devices for in situ production of chlorine dioxide or sodium hypochlorite as efficient disinfectants for water treatment. The most important part of such a device is the electrochemical reactor. Electrochemical reactor uses external source of direct current in order to produce disinfectants in electrochemical reactions occurring at the electrodes. Construction of an electrochemical device for water treatment is based on evaluation of optimal conditions for electrochemical reactions during continues production of disinfectants. The aim of this study was to develop a low-cost electrochemical device for the production of disinfectant, active chlorine, at the place of its usage, based on newly developed technical solutions and newest commercial components. The projected electrochemical device was constructed and mounted, and its operation was investigated. Investigations involved both functionality of individual components and device in general. The major goal of these investigations was to achieve maximal efficiency in extreme condition of elevated room temperature and humidity with a novel device construction involving coaxial heat exchanger at the solution inlet. Room operation of the proposed device was investigated when relative humidity was set to 90% and the ambient temperature of 38°C. The obtained results in such extreme operation conditions reveled that it was possible to obtain required concentration of 0.85% of active chlorine with maximal temperature of outlet electrolyte of 35.3°C, which is within the limits of optimal temperatures.
PB  - Association of the Chemical Engineers of Serbia
T2  - Hemijska industrija
T1  - Automatic devices for electrochemical water treatment with cooling of electrolyte
SP  - 201
EP  - 207
VL  - 70
IS  - 2
DO  - 10.2298/HEMIND140822026T
UR  - https://hdl.handle.net/21.15107/rcub_dais_2326
ER  - 

@article{
author = "Trišović, Tomislav and Spasojević, Miroslav D. and Gvozdenović, Milica M. and Jugović, Branimir and Rafailović, Lidija D.",
year = "2016",
abstract = "The most common disinfectants for water treatment are based on chlorine and its compounds. Practically, water treatments with chlorine compounds have no alternative, since they provide, in comparison to other effective processes such as ozonization or ultraviolet irradiation, high residual disinfection capacity. Unfortunately, all of chlorine-based compounds for disinfection tend to degrade during storage, thus reducing the concentration of active chlorine. Apart from degradation, additional problems are transportation, storage and handling of such hazardous compounds. Nowadays, a lot of attention is paid to the development of electrochemical devices for in situ production of chlorine dioxide or sodium hypochlorite as efficient disinfectants for water treatment. The most important part of such a device is the electrochemical reactor. Electrochemical reactor uses external source of direct current in order to produce disinfectants in electrochemical reactions occurring at the electrodes. Construction of an electrochemical device for water treatment is based on evaluation of optimal conditions for electrochemical reactions during continues production of disinfectants. The aim of this study was to develop a low-cost electrochemical device for the production of disinfectant, active chlorine, at the place of its usage, based on newly developed technical solutions and newest commercial components. The projected electrochemical device was constructed and mounted, and its operation was investigated. Investigations involved both functionality of individual components and device in general. The major goal of these investigations was to achieve maximal efficiency in extreme condition of elevated room temperature and humidity with a novel device construction involving coaxial heat exchanger at the solution inlet. Room operation of the proposed device was investigated when relative humidity was set to 90% and the ambient temperature of 38°C. The obtained results in such extreme operation conditions reveled that it was possible to obtain required concentration of 0.85% of active chlorine with maximal temperature of outlet electrolyte of 35.3°C, which is within the limits of optimal temperatures.",
publisher = "Association of the Chemical Engineers of Serbia",
journal = "Hemijska industrija",
title = "Automatic devices for electrochemical water treatment with cooling of electrolyte",
pages = "201-207",
volume = "70",
number = "2",
doi = "10.2298/HEMIND140822026T",
url = "https://hdl.handle.net/21.15107/rcub_dais_2326"
}

Trišović, T., Spasojević, M. D., Gvozdenović, M. M., Jugović, B.,& Rafailović, L. D.. (2016). Automatic devices for electrochemical water treatment with cooling of electrolyte. in Hemijska industrija
Association of the Chemical Engineers of Serbia., 70(2), 201-207.
https://doi.org/10.2298/HEMIND140822026T
https://hdl.handle.net/21.15107/rcub_dais_2326

Trišović T, Spasojević MD, Gvozdenović MM, Jugović B, Rafailović LD. Automatic devices for electrochemical water treatment with cooling of electrolyte. in Hemijska industrija. 2016;70(2):201-207.
doi:10.2298/HEMIND140822026T
https://hdl.handle.net/21.15107/rcub_dais_2326 .

Trišović, Tomislav, Spasojević, Miroslav D., Gvozdenović, Milica M., Jugović, Branimir, Rafailović, Lidija D., "Automatic devices for electrochemical water treatment with cooling of electrolyte" in Hemijska industrija, 70, no. 2 (2016):201-207,
https://doi.org/10.2298/HEMIND140822026T .,
https://hdl.handle.net/21.15107/rcub_dais_2326 .

TY  - JOUR
AU  - Rafailović, Lidija D.
AU  - Gammer, Christoph
AU  - Srajer, J.
AU  - Trišović, Tomislav
AU  - Rahel, J.
AU  - Karnthaler, Hans-Peter
PY  - 2016
UR  - https://dais.sanu.ac.rs/123456789/2323
AB  - We present the application of newly developed Ag nanodendrites (Ag-ND) grown together with anodic aluminium oxide for surface-enhanced Raman scattering (SERS). The Ag-ND yield very pronounced SERS using a self-assembled monolayer (SAM). This is confirmed by simulations showing hot spots in the electromagnetic field at the surfaces of the Ag-ND. SERS measurements reusing Ag-ND demonstrate its long-term stability even after one year.
PB  - Royal Society of Chemistry
T2  - RSC Advances
T1  - Surface enhanced Raman scattering of dendritic Ag nanostructures grown with anodic aluminium oxide
SP  - 33348
EP  - 33352
VL  - 6
DO  - 10.1039/C5RA26632G
UR  - https://hdl.handle.net/21.15107/rcub_dais_2323
ER  - 

@article{
author = "Rafailović, Lidija D. and Gammer, Christoph and Srajer, J. and Trišović, Tomislav and Rahel, J. and Karnthaler, Hans-Peter",
year = "2016",
abstract = "We present the application of newly developed Ag nanodendrites (Ag-ND) grown together with anodic aluminium oxide for surface-enhanced Raman scattering (SERS). The Ag-ND yield very pronounced SERS using a self-assembled monolayer (SAM). This is confirmed by simulations showing hot spots in the electromagnetic field at the surfaces of the Ag-ND. SERS measurements reusing Ag-ND demonstrate its long-term stability even after one year.",
publisher = "Royal Society of Chemistry",
journal = "RSC Advances",
title = "Surface enhanced Raman scattering of dendritic Ag nanostructures grown with anodic aluminium oxide",
pages = "33348-33352",
volume = "6",
doi = "10.1039/C5RA26632G",
url = "https://hdl.handle.net/21.15107/rcub_dais_2323"
}

Rafailović, L. D., Gammer, C., Srajer, J., Trišović, T., Rahel, J.,& Karnthaler, H.. (2016). Surface enhanced Raman scattering of dendritic Ag nanostructures grown with anodic aluminium oxide. in RSC Advances
Royal Society of Chemistry., 6, 33348-33352.
https://doi.org/10.1039/C5RA26632G
https://hdl.handle.net/21.15107/rcub_dais_2323

Rafailović LD, Gammer C, Srajer J, Trišović T, Rahel J, Karnthaler H. Surface enhanced Raman scattering of dendritic Ag nanostructures grown with anodic aluminium oxide. in RSC Advances. 2016;6:33348-33352.
doi:10.1039/C5RA26632G
https://hdl.handle.net/21.15107/rcub_dais_2323 .

Rafailović, Lidija D., Gammer, Christoph, Srajer, J., Trišović, Tomislav, Rahel, J., Karnthaler, Hans-Peter, "Surface enhanced Raman scattering of dendritic Ag nanostructures grown with anodic aluminium oxide" in RSC Advances, 6 (2016):33348-33352,
https://doi.org/10.1039/C5RA26632G .,
https://hdl.handle.net/21.15107/rcub_dais_2323 .

TY  - JOUR
AU  - Rafailović, Lidija D.
AU  - Gammer, Christoph
AU  - Rentenberger, C.
AU  - Trišović, Tomislav
AU  - Kleber, Christoph
AU  - Karnthaler, Hans-Peter
PY  - 2015
UR  - https://dais.sanu.ac.rs/123456789/3516
AB  - A novel synthesis strategy is presented for depositing metallic Ag at the anode during simultaneous electrochemical oxidation of Al. This unexpected result is achieved based on galvanic coupling. Metallic dendritic nanostructures well-anchored in a high surface area supporting matrix are envisioned to open up a new avenue of applications. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
PB  - Weinheim : WILEY‐VCH Verlag
T2  - Advanced Materials
T1  - Functionalizing Aluminum Oxide by Ag Dendrite Deposition at the Anode during Simultaneous Electrochemical Oxidation of Al
SP  - 6438
EP  - 6443
VL  - 27
IS  - 41
DO  - 10.1002/adma.201502451
UR  - https://hdl.handle.net/21.15107/rcub_dais_3516
ER  - 

@article{
author = "Rafailović, Lidija D. and Gammer, Christoph and Rentenberger, C. and Trišović, Tomislav and Kleber, Christoph and Karnthaler, Hans-Peter",
year = "2015",
abstract = "A novel synthesis strategy is presented for depositing metallic Ag at the anode during simultaneous electrochemical oxidation of Al. This unexpected result is achieved based on galvanic coupling. Metallic dendritic nanostructures well-anchored in a high surface area supporting matrix are envisioned to open up a new avenue of applications. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.",
publisher = "Weinheim : WILEY‐VCH Verlag",
journal = "Advanced Materials",
title = "Functionalizing Aluminum Oxide by Ag Dendrite Deposition at the Anode during Simultaneous Electrochemical Oxidation of Al",
pages = "6438-6443",
volume = "27",
number = "41",
doi = "10.1002/adma.201502451",
url = "https://hdl.handle.net/21.15107/rcub_dais_3516"
}

Rafailović, L. D., Gammer, C., Rentenberger, C., Trišović, T., Kleber, C.,& Karnthaler, H.. (2015). Functionalizing Aluminum Oxide by Ag Dendrite Deposition at the Anode during Simultaneous Electrochemical Oxidation of Al. in Advanced Materials
Weinheim : WILEY‐VCH Verlag., 27(41), 6438-6443.
https://doi.org/10.1002/adma.201502451
https://hdl.handle.net/21.15107/rcub_dais_3516

Rafailović LD, Gammer C, Rentenberger C, Trišović T, Kleber C, Karnthaler H. Functionalizing Aluminum Oxide by Ag Dendrite Deposition at the Anode during Simultaneous Electrochemical Oxidation of Al. in Advanced Materials. 2015;27(41):6438-6443.
doi:10.1002/adma.201502451
https://hdl.handle.net/21.15107/rcub_dais_3516 .

Rafailović, Lidija D., Gammer, Christoph, Rentenberger, C., Trišović, Tomislav, Kleber, Christoph, Karnthaler, Hans-Peter, "Functionalizing Aluminum Oxide by Ag Dendrite Deposition at the Anode during Simultaneous Electrochemical Oxidation of Al" in Advanced Materials, 27, no. 41 (2015):6438-6443,
https://doi.org/10.1002/adma.201502451 .,
https://hdl.handle.net/21.15107/rcub_dais_3516 .

TY  - JOUR
AU  - Rafailović, Lidija D.
AU  - Gammer, Christoph
AU  - Ratenberger, Christian
AU  - Trišović, Tomislav
AU  - Kleber, Christoph
AU  - Karnthaler, Hans-Peter
PY  - 2013
UR  - https://dais.sanu.ac.rs/123456789/376
AB  - Electrodeposition at high current densities provides excellent means for the production of deposits with a high surface area. Porous deposits attract great interest due to their wide range of possible applications in electrocatalysis. In addition, an advanced porous electrode should have both, micro and nanoscaled features. We report the synthesis of a multiscale open porous foam of NiCoFe and its excellent electrocatalytic performance. At a current density of 1 A cm−2 a 3D dendritic structure with open pores is obtained with pore walls having a morphology that consists of ‘cauliflower-like’ particles containing open multiscaled dendritic structures. Cyclic voltammograms of a smooth NiCoFe electrode are compared with those of the achieved nanodendritic NiCoFe foam electrode. The catalytic activity of the NiCoFe foam is strongly enhanced for both, the cathodic reduction of oxygen and the anodic evolution of oxygen and shows a good reversibility. Therefore the presented new material is promising as bifunctional catalyst in electrochemical energy conversion and storage devices.
PB  - Elsevier
T2  - Nano Energy
T1  - Enhanced oxygen evolution and reduction reactions of porous ternary NiCoFe foam electrodes prepared by dynamic hydrogen template deposition
SP  - 523
EP  - 529
VL  - 2
IS  - 4
DO  - 10.1016/j.nanoen.2012.12.004
UR  - https://hdl.handle.net/21.15107/rcub_dais_376
ER  - 

@article{
author = "Rafailović, Lidija D. and Gammer, Christoph and Ratenberger, Christian and Trišović, Tomislav and Kleber, Christoph and Karnthaler, Hans-Peter",
year = "2013",
abstract = "Electrodeposition at high current densities provides excellent means for the production of deposits with a high surface area. Porous deposits attract great interest due to their wide range of possible applications in electrocatalysis. In addition, an advanced porous electrode should have both, micro and nanoscaled features. We report the synthesis of a multiscale open porous foam of NiCoFe and its excellent electrocatalytic performance. At a current density of 1 A cm−2 a 3D dendritic structure with open pores is obtained with pore walls having a morphology that consists of ‘cauliflower-like’ particles containing open multiscaled dendritic structures. Cyclic voltammograms of a smooth NiCoFe electrode are compared with those of the achieved nanodendritic NiCoFe foam electrode. The catalytic activity of the NiCoFe foam is strongly enhanced for both, the cathodic reduction of oxygen and the anodic evolution of oxygen and shows a good reversibility. Therefore the presented new material is promising as bifunctional catalyst in electrochemical energy conversion and storage devices.",
publisher = "Elsevier",
journal = "Nano Energy",
title = "Enhanced oxygen evolution and reduction reactions of porous ternary NiCoFe foam electrodes prepared by dynamic hydrogen template deposition",
pages = "523-529",
volume = "2",
number = "4",
doi = "10.1016/j.nanoen.2012.12.004",
url = "https://hdl.handle.net/21.15107/rcub_dais_376"
}

Rafailović, L. D., Gammer, C., Ratenberger, C., Trišović, T., Kleber, C.,& Karnthaler, H.. (2013). Enhanced oxygen evolution and reduction reactions of porous ternary NiCoFe foam electrodes prepared by dynamic hydrogen template deposition. in Nano Energy
Elsevier., 2(4), 523-529.
https://doi.org/10.1016/j.nanoen.2012.12.004
https://hdl.handle.net/21.15107/rcub_dais_376

Rafailović LD, Gammer C, Ratenberger C, Trišović T, Kleber C, Karnthaler H. Enhanced oxygen evolution and reduction reactions of porous ternary NiCoFe foam electrodes prepared by dynamic hydrogen template deposition. in Nano Energy. 2013;2(4):523-529.
doi:10.1016/j.nanoen.2012.12.004
https://hdl.handle.net/21.15107/rcub_dais_376 .

Rafailović, Lidija D., Gammer, Christoph, Ratenberger, Christian, Trišović, Tomislav, Kleber, Christoph, Karnthaler, Hans-Peter, "Enhanced oxygen evolution and reduction reactions of porous ternary NiCoFe foam electrodes prepared by dynamic hydrogen template deposition" in Nano Energy, 2, no. 4 (2013):523-529,
https://doi.org/10.1016/j.nanoen.2012.12.004 .,
https://hdl.handle.net/21.15107/rcub_dais_376 .

TY  - JOUR
AU  - Rafailović, Lidija D.
AU  - Karnthaler, Hans-Peter
AU  - Trišović, Tomislav
AU  - Minić, Dragica M.
PY  - 2010
UR  - https://dais.sanu.ac.rs/123456789/3424
AB  - The nickel and cobalt disperse alloy deposits of five different compositions were obtained by electrodeposition on Cu substrates in the galvanostatic regime from an ammonium sulfate-chloride solution. The effect of cathodic current density and Ni2+/Co2+ ions concentration ratio in the electrolyte on the composition, microstructure, morphology and mechanical properties of Ni-Co alloys were investigated. Conditions for formation of nanostrustured disperse deposits and surface roughness was determined by 3D SEM reconstruction of the specimen surface. It was established that formation of the disperse deposits with highly developed structures is favored from bath with equal Ni2+/Co2+ ions concentration ratio in the electrolyte. Cathodic polarization diagrams determined for all investigated alloys have shown shift of the cathodic potential for alloy deposition to the more negative values with increasing Ni2+/Co2+ ions concentration ratio in the electrolyte. An increase of in the cobalt content in the alloy was observed with decreasing the current density and increasing of the Co2+ ions concentration ratio in the bath. X-ray analyses of nanocrystalline Ni-Co deposits show formation of a single phase face-centered cubic (FCC), a single phase hexagonal-close packed (HCP) and mixture of FCC solid solutions and HCP phase depending on the current density applied and electrolyte composition. The increase of HCP phase content in the nanocrystalline deposits appears as a result of both, the increase in Co2+ ions concentration in the bath and decrease of deposition current density. The mechanical properties of nanocrystalline deposits have shown increase of the hardness with increasing Ni content in the alloy. The cross-section of the samples electrodeposited on Cu substrates from electrolytes with equal ion metal concentration at lower current density values revealed the beginning of a dendrite structure formation. © 2009 Elsevier B.V. All rights reserved.
PB  - Elsevier
T2  - Materials Chemistry and Physics
T1  - Microstructure and mechanical properties of disperse Ni-Co alloys electrodeposited on Cu substrates
SP  - 409
EP  - 416
VL  - 120
IS  - 2-3
DO  - 10.1016/j.matchemphys.2009.11.029
UR  - https://hdl.handle.net/21.15107/rcub_dais_3424
ER  - 

@article{
author = "Rafailović, Lidija D. and Karnthaler, Hans-Peter and Trišović, Tomislav and Minić, Dragica M.",
year = "2010",
abstract = "The nickel and cobalt disperse alloy deposits of five different compositions were obtained by electrodeposition on Cu substrates in the galvanostatic regime from an ammonium sulfate-chloride solution. The effect of cathodic current density and Ni2+/Co2+ ions concentration ratio in the electrolyte on the composition, microstructure, morphology and mechanical properties of Ni-Co alloys were investigated. Conditions for formation of nanostrustured disperse deposits and surface roughness was determined by 3D SEM reconstruction of the specimen surface. It was established that formation of the disperse deposits with highly developed structures is favored from bath with equal Ni2+/Co2+ ions concentration ratio in the electrolyte. Cathodic polarization diagrams determined for all investigated alloys have shown shift of the cathodic potential for alloy deposition to the more negative values with increasing Ni2+/Co2+ ions concentration ratio in the electrolyte. An increase of in the cobalt content in the alloy was observed with decreasing the current density and increasing of the Co2+ ions concentration ratio in the bath. X-ray analyses of nanocrystalline Ni-Co deposits show formation of a single phase face-centered cubic (FCC), a single phase hexagonal-close packed (HCP) and mixture of FCC solid solutions and HCP phase depending on the current density applied and electrolyte composition. The increase of HCP phase content in the nanocrystalline deposits appears as a result of both, the increase in Co2+ ions concentration in the bath and decrease of deposition current density. The mechanical properties of nanocrystalline deposits have shown increase of the hardness with increasing Ni content in the alloy. The cross-section of the samples electrodeposited on Cu substrates from electrolytes with equal ion metal concentration at lower current density values revealed the beginning of a dendrite structure formation. © 2009 Elsevier B.V. All rights reserved.",
publisher = "Elsevier",
journal = "Materials Chemistry and Physics",
title = "Microstructure and mechanical properties of disperse Ni-Co alloys electrodeposited on Cu substrates",
pages = "409-416",
volume = "120",
number = "2-3",
doi = "10.1016/j.matchemphys.2009.11.029",
url = "https://hdl.handle.net/21.15107/rcub_dais_3424"
}

Rafailović, L. D., Karnthaler, H., Trišović, T.,& Minić, D. M.. (2010). Microstructure and mechanical properties of disperse Ni-Co alloys electrodeposited on Cu substrates. in Materials Chemistry and Physics
Elsevier., 120(2-3), 409-416.
https://doi.org/10.1016/j.matchemphys.2009.11.029
https://hdl.handle.net/21.15107/rcub_dais_3424

Rafailović LD, Karnthaler H, Trišović T, Minić DM. Microstructure and mechanical properties of disperse Ni-Co alloys electrodeposited on Cu substrates. in Materials Chemistry and Physics. 2010;120(2-3):409-416.
doi:10.1016/j.matchemphys.2009.11.029
https://hdl.handle.net/21.15107/rcub_dais_3424 .

Rafailović, Lidija D., Karnthaler, Hans-Peter, Trišović, Tomislav, Minić, Dragica M., "Microstructure and mechanical properties of disperse Ni-Co alloys electrodeposited on Cu substrates" in Materials Chemistry and Physics, 120, no. 2-3 (2010):409-416,
https://doi.org/10.1016/j.matchemphys.2009.11.029 .,
https://hdl.handle.net/21.15107/rcub_dais_3424 .

TY  - JOUR
AU  - Rafailović, Lidija D.
AU  - Minić, Dragica M.
AU  - Karnthaler, Hans-Peter
AU  - Wosik, J.
AU  - Trišović, Tomislav
AU  - Nauer, G. E.
PY  - 2010
UR  - https://dais.sanu.ac.rs/123456789/3423
AB  - Ni-Co alloy deposits and their parent metals were formed on Cu substrates by electrolysis under different current densities applied in the galvanostatic regime. A quantitative scanning electron microscopy technique was employed to study the morphology and surface roughness of the obtained deposits. The structure of the deposits is governed by the nature of depositing ions and quantity of evolved hydrogen. The cauliflower morphology and the highest mean surface roughness values are the results of electrodeposition from the Ni containing bath. The structure of the Co deposits formed under the same conditions and determined by the formation of the hexagonal close-packed phase results in a more uniform grain size distribution and formation of smoother platelet deposits. The mean surface values of the parent metals are independent of the current density. The dendritic growth is a special case of a structure formed only in the Ni-Co alloy deposition at selected, high current densities of 220 and 400 mA cm-2. The dendrites obtained at a higher current density of 400 mA cm-2 have shown more developed structures with smaller dendrites that have more pronounced secondary branch and high order branches. © 2010 The Electrochemical Society.
PB  - Pennington, N. J.: The Electrochemical Society
T2  - Journal of the Electrochemical Society
T1  - Study of the dendritic growth of Ni-Co alloys electrodeposited on Cu substrates
SP  - D295
EP  - D301
VL  - 157
IS  - 5
DO  - 10.1149/1.3336957
UR  - https://hdl.handle.net/21.15107/rcub_dais_3423
ER  - 

@article{
author = "Rafailović, Lidija D. and Minić, Dragica M. and Karnthaler, Hans-Peter and Wosik, J. and Trišović, Tomislav and Nauer, G. E.",
year = "2010",
abstract = "Ni-Co alloy deposits and their parent metals were formed on Cu substrates by electrolysis under different current densities applied in the galvanostatic regime. A quantitative scanning electron microscopy technique was employed to study the morphology and surface roughness of the obtained deposits. The structure of the deposits is governed by the nature of depositing ions and quantity of evolved hydrogen. The cauliflower morphology and the highest mean surface roughness values are the results of electrodeposition from the Ni containing bath. The structure of the Co deposits formed under the same conditions and determined by the formation of the hexagonal close-packed phase results in a more uniform grain size distribution and formation of smoother platelet deposits. The mean surface values of the parent metals are independent of the current density. The dendritic growth is a special case of a structure formed only in the Ni-Co alloy deposition at selected, high current densities of 220 and 400 mA cm-2. The dendrites obtained at a higher current density of 400 mA cm-2 have shown more developed structures with smaller dendrites that have more pronounced secondary branch and high order branches. © 2010 The Electrochemical Society.",
publisher = "Pennington, N. J.: The Electrochemical Society",
journal = "Journal of the Electrochemical Society",
title = "Study of the dendritic growth of Ni-Co alloys electrodeposited on Cu substrates",
pages = "D295-D301",
volume = "157",
number = "5",
doi = "10.1149/1.3336957",
url = "https://hdl.handle.net/21.15107/rcub_dais_3423"
}

Rafailović, L. D., Minić, D. M., Karnthaler, H., Wosik, J., Trišović, T.,& Nauer, G. E.. (2010). Study of the dendritic growth of Ni-Co alloys electrodeposited on Cu substrates. in Journal of the Electrochemical Society
Pennington, N. J.: The Electrochemical Society., 157(5), D295-D301.
https://doi.org/10.1149/1.3336957
https://hdl.handle.net/21.15107/rcub_dais_3423

Rafailović LD, Minić DM, Karnthaler H, Wosik J, Trišović T, Nauer GE. Study of the dendritic growth of Ni-Co alloys electrodeposited on Cu substrates. in Journal of the Electrochemical Society. 2010;157(5):D295-D301.
doi:10.1149/1.3336957
https://hdl.handle.net/21.15107/rcub_dais_3423 .

Rafailović, Lidija D., Minić, Dragica M., Karnthaler, Hans-Peter, Wosik, J., Trišović, Tomislav, Nauer, G. E., "Study of the dendritic growth of Ni-Co alloys electrodeposited on Cu substrates" in Journal of the Electrochemical Society, 157, no. 5 (2010):D295-D301,
https://doi.org/10.1149/1.3336957 .,
https://hdl.handle.net/21.15107/rcub_dais_3423 .