Marković, Smilja

Link to this page

Authority KeyName Variants
orcid::0000-0002-9264-4406
  • Marković, Smilja (221)
  • Marković, Smilja B. (2)
Projects
Molecular designing of nanoparticles with controlled morphological and physicochemical characteristics and functional materials based on them Directed synthesis, structure and properties of multifunctional materials
Sinteza funkcionalnih materijala sa kontrolisanom strukturom na molekularnom i nano nivou Synthesis, processing and applications of nanostructured multifunctional materials with defined properties
Development, characterization and application nanostructured and composite electrocatalysts and interactive supports for fuel cells and water electrolysis Zero- to Three-Dimensional Nanostructures for Application in Electronics and Renewable Energy Sources: Synthesis, Characterization and Processing
Lithium-ion batteries and fuel cells - research and development Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200175 (Institute of Technical Sciences of SASA, Belgrade)
United States National Institutes of Health (NIH) / National Institute of Dental and Craniofacial Research (NIDCR), Grant K99-DE021416 Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200135 (University of Belgrade, Faculty of Technology and Metallurgy)
Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200287 (Innovation Center of the Faculty of Technology and Metallurgy) Ministry of Science of Montenegro, Project no. 01-2383/2
Ministry of Science of Montenegro, Project no. 01-460 Nanostructured Functional and Composite Materials in Catalytic and Sorption Processes
Nanostructured multifunctional materials and nanocomposites Novel encapsulation and enzyme technologies for designing of new biocatalysts and biologically active compounds targeting enhancement of food quality, safety and competitiveness
Predefined functional properties polymer composite materials processes and equipment development Serbian Academy of Sciences and Arts, Project F-141
Electroconducting and redox-active polymers and oligomers: synthesis, structure, properties and applications Physics and Chemistry with Ion Beams
Ministry of Education, Youth and Sports (MEYS) of Czech Republic - CEITEC 2020 [LQ1601] Ministry of Health (Bando Ricerca Finalizzata 2016, no. GR-2016-02364704)
Bilateral cooperation program between the Republic of Serbia and the Republic of Slovenia “Nanostructured and mesoporous functional materials with enhanced solar light driven photocatalytic activity” for 2018–2019 Bilateral cooperation program between the Republic of Serbia and the Republic of Slovenia, Project 451-03-1251/2012-09/06
Czech Science Foundation (GACR) - 17-05620S Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200003 (Institute for Medicinal Plant Research 'Dr. Josif Pančić ', Belgrade)
Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200017 (University of Belgrade, Institute of Nuclear Sciences 'Vinča', Belgrade-Vinča) Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200378 (Institute of Information Technology)
Optoelectronics nanodimension systems - the rout towards applications Synthesis, processing and characterization of nanostructured materials for application in the field of energy, mechanical engineering, environmental protection and biomedicine

Author's Bibliography

Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing

Dojčinović, Milena P.; Vasiljević, Zorka Ž.; Krstić, Jugoslav B.; Vujančević, Jelena D.; Marković, Smilja; Tadić, Nenad B.; Nikolic, Maria Vesna

(Basel : MDPI AG, 2021)

TY  - JOUR
AU  - Dojčinović, Milena P.
AU  - Vasiljević, Zorka Ž.
AU  - Krstić, Jugoslav B.
AU  - Vujančević, Jelena D.
AU  - Marković, Smilja
AU  - Tadić, Nenad B.
AU  - Nikolic, Maria Vesna
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11797
AB  - Nickel manganite nanocrystalline fibers were obtained by electrospinning and subsequent calcination at 400 °C. As-spun fibers were characterized by TG/DTA, Scanning Electron Microscopy and FT-IR spectroscopy analysis. X-ray diffraction and FT-IR spectroscopy analysis confirmed the formation of nickel manganite with a cubic spinel structure, while N2 physisorption at 77 K enabled determination of the BET specific surface area as 25.3 m2/g and (BJH) mesopore volume as 21.5 m2/g. The material constant (B) of the nanocrystalline nickel manganite fibers applied by drop-casting on test interdigitated electrodes on alumina substrate, dried at room temperature, was determined as 4379 K in the 20–50 °C temperature range and a temperature sensitivity of −4.95%/K at room temperature (25 °C). The change of impedance with relative humidity was monitored at 25 and 50 °C for a relative humidity (RH) change of 40 to 90% in the 42 Hzπ1 MHz frequency range. At 100 Hz and 25 °C, the sensitivity of 327.36 ± 80.12 kΩ/%RH was determined, showing that nickel manganite obtained by electrospinning has potential as a multifunctional material for combined humidity and temperature sensing.
PB  - Basel : MDPI AG
T2  - Sensors
T1  - Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing
SP  - 4357
VL  - 21
IS  - 13
DO  - 10.3390/s21134357
UR  - https://hdl.handle.net/21.15107/rcub_dais_11797
ER  - 
@article{
author = "Dojčinović, Milena P. and Vasiljević, Zorka Ž. and Krstić, Jugoslav B. and Vujančević, Jelena D. and Marković, Smilja and Tadić, Nenad B. and Nikolic, Maria Vesna",
year = "2021",
abstract = "Nickel manganite nanocrystalline fibers were obtained by electrospinning and subsequent calcination at 400 °C. As-spun fibers were characterized by TG/DTA, Scanning Electron Microscopy and FT-IR spectroscopy analysis. X-ray diffraction and FT-IR spectroscopy analysis confirmed the formation of nickel manganite with a cubic spinel structure, while N2 physisorption at 77 K enabled determination of the BET specific surface area as 25.3 m2/g and (BJH) mesopore volume as 21.5 m2/g. The material constant (B) of the nanocrystalline nickel manganite fibers applied by drop-casting on test interdigitated electrodes on alumina substrate, dried at room temperature, was determined as 4379 K in the 20–50 °C temperature range and a temperature sensitivity of −4.95%/K at room temperature (25 °C). The change of impedance with relative humidity was monitored at 25 and 50 °C for a relative humidity (RH) change of 40 to 90% in the 42 Hzπ1 MHz frequency range. At 100 Hz and 25 °C, the sensitivity of 327.36 ± 80.12 kΩ/%RH was determined, showing that nickel manganite obtained by electrospinning has potential as a multifunctional material for combined humidity and temperature sensing.",
publisher = "Basel : MDPI AG",
journal = "Sensors",
title = "Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing",
pages = "4357",
volume = "21",
number = "13",
doi = "10.3390/s21134357",
url = "https://hdl.handle.net/21.15107/rcub_dais_11797"
}
Dojčinović, M. P., Vasiljević, Z. Ž., Krstić, J. B., Vujančević, J. D., Marković, S., Tadić, N. B.,& Nikolic, M. V.. (2021). Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing. in Sensors
Basel : MDPI AG., 21(13), 4357.
https://doi.org/10.3390/s21134357
https://hdl.handle.net/21.15107/rcub_dais_11797
Dojčinović MP, Vasiljević ZŽ, Krstić JB, Vujančević JD, Marković S, Tadić NB, Nikolic MV. Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing. in Sensors. 2021;21(13):4357.
doi:10.3390/s21134357
https://hdl.handle.net/21.15107/rcub_dais_11797 .
Dojčinović, Milena P., Vasiljević, Zorka Ž., Krstić, Jugoslav B., Vujančević, Jelena D., Marković, Smilja, Tadić, Nenad B., Nikolic, Maria Vesna, "Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing" in Sensors, 21, no. 13 (2021):4357,
https://doi.org/10.3390/s21134357 .,
https://hdl.handle.net/21.15107/rcub_dais_11797 .
1
1

Freeze vs. Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material

Jovanović, Aleksandra A.; Lević, Steva M.; Pavlović, Vladimir B.; Marković, Smilja B.; Pjanović, Rada V.; Đorđević, Verica B.; Nedović, Viktor; Bugarski, Branko M.

(Basel : MDPI AG, 2021)

TY  - JOUR
AU  - Jovanović, Aleksandra A.
AU  - Lević, Steva M.
AU  - Pavlović, Vladimir B.
AU  - Marković, Smilja B.
AU  - Pjanović, Rada V.
AU  - Đorđević, Verica B.
AU  - Nedović, Viktor
AU  - Bugarski, Branko M.
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11798
AB  - Freeze drying was compared with spray drying regarding feasibility to process wild thyme drugs in order to obtain dry formulations at laboratory scale starting from liquid extracts produced by different extraction methods: maceration and heat-, ultrasound-, and microwave-assisted extractions. Higher total powder yield (based on the dry weight prior to extraction) was achieved by freeze than spray drying and lower loss of total polyphenol content (TPC) and total flavonoid content (TFC) due to the drying process. Gelatin as a coating agent (5% w/w) provided better TPC recovery by 70% in case of lyophilization and higher total powder yield in case of spray drying by diminishing material deposition on the wall of the drying chamber. The resulting gelatin-free and gelatin-containing powders carried polyphenols in amount ~190 and 53–75 mg gallic acid equivalents GAE/g of powder, respectively. Microwave-assisted extract formulation was distinguished from the others by a higher content of polyphenols, proteins and sugars, higher bulk density and lower solubility. The type of the drying process mainly affected the position of the gelatin-derived -OH and amide bands in FTIR spectra. Spray-dried formulations compared to freeze-dried expressed higher thermal stability as confirmed by differential scanning calorimetry analysis and a higher diffusion coefficient; the last feature can be associated with the lower specific surface area of irregularly shaped freeze-dried particles (151–223 µm) compared to small microspheres (~8 µm) in spray-dried powder.
PB  - Basel : MDPI AG
T2  - Molecules
T1  - Freeze vs. Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material
SP  - 3933
VL  - 26
IS  - 13
DO  - 10.3390/molecules26133933
UR  - https://hdl.handle.net/21.15107/rcub_dais_11798
ER  - 
@article{
author = "Jovanović, Aleksandra A. and Lević, Steva M. and Pavlović, Vladimir B. and Marković, Smilja B. and Pjanović, Rada V. and Đorđević, Verica B. and Nedović, Viktor and Bugarski, Branko M.",
year = "2021",
abstract = "Freeze drying was compared with spray drying regarding feasibility to process wild thyme drugs in order to obtain dry formulations at laboratory scale starting from liquid extracts produced by different extraction methods: maceration and heat-, ultrasound-, and microwave-assisted extractions. Higher total powder yield (based on the dry weight prior to extraction) was achieved by freeze than spray drying and lower loss of total polyphenol content (TPC) and total flavonoid content (TFC) due to the drying process. Gelatin as a coating agent (5% w/w) provided better TPC recovery by 70% in case of lyophilization and higher total powder yield in case of spray drying by diminishing material deposition on the wall of the drying chamber. The resulting gelatin-free and gelatin-containing powders carried polyphenols in amount ~190 and 53–75 mg gallic acid equivalents GAE/g of powder, respectively. Microwave-assisted extract formulation was distinguished from the others by a higher content of polyphenols, proteins and sugars, higher bulk density and lower solubility. The type of the drying process mainly affected the position of the gelatin-derived -OH and amide bands in FTIR spectra. Spray-dried formulations compared to freeze-dried expressed higher thermal stability as confirmed by differential scanning calorimetry analysis and a higher diffusion coefficient; the last feature can be associated with the lower specific surface area of irregularly shaped freeze-dried particles (151–223 µm) compared to small microspheres (~8 µm) in spray-dried powder.",
publisher = "Basel : MDPI AG",
journal = "Molecules",
title = "Freeze vs. Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material",
pages = "3933",
volume = "26",
number = "13",
doi = "10.3390/molecules26133933",
url = "https://hdl.handle.net/21.15107/rcub_dais_11798"
}
Jovanović, A. A., Lević, S. M., Pavlović, V. B., Marković, S. B., Pjanović, R. V., Đorđević, V. B., Nedović, V.,& Bugarski, B. M.. (2021). Freeze vs. Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material. in Molecules
Basel : MDPI AG., 26(13), 3933.
https://doi.org/10.3390/molecules26133933
https://hdl.handle.net/21.15107/rcub_dais_11798
Jovanović AA, Lević SM, Pavlović VB, Marković SB, Pjanović RV, Đorđević VB, Nedović V, Bugarski BM. Freeze vs. Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material. in Molecules. 2021;26(13):3933.
doi:10.3390/molecules26133933
https://hdl.handle.net/21.15107/rcub_dais_11798 .
Jovanović, Aleksandra A., Lević, Steva M., Pavlović, Vladimir B., Marković, Smilja B., Pjanović, Rada V., Đorđević, Verica B., Nedović, Viktor, Bugarski, Branko M., "Freeze vs. Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material" in Molecules, 26, no. 13 (2021):3933,
https://doi.org/10.3390/molecules26133933 .,
https://hdl.handle.net/21.15107/rcub_dais_11798 .

Freeze versus Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material

Jovanović, Aleksandra A.; Lević, Steva; Pavlović, Vladimir B.; Marković, Smilja; Pjanović, Rada; Đorđević, Verica B.; Nedović, Viktor; Bugarski, Branko

(2021)

TY  - GEN
AU  - Jovanović, Aleksandra A.
AU  - Lević, Steva
AU  - Pavlović, Vladimir B.
AU  - Marković, Smilja
AU  - Pjanović, Rada
AU  - Đorđević, Verica B.
AU  - Nedović, Viktor
AU  - Bugarski, Branko
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11637
AB  - Freeze drying was compared with spray drying regarding feasibility to process wild thyme drug in order to obtain dry formulations at laboratory scale starting from liquid extracts produced by different extraction methods: maceration, heat-, ultrasound-, and microwave-assisted extractions. Higher powder yield (based on the dry weight prior to extraction) was achieved by freeze than spray drying and lower loss of total polyphenol content (TPC) and total flavonoid content (TFC) due to the drying process. Gelatin as a coating agent (5% w/w) provided better TPC recovery by 70% in case of lyophilization and higher powder yield in case of spray drying by diminishing material deposition on the wall of the drying chamber. The resulting gelatin-free and gelatin-containing powders carried polyphenols in amount ~190 and 53-75 mg gallic acid equivalents GAE/g of powder, respectively. Microwave-assisted extract formulation distinguished from others by higher content of polyphenols, proteins and sugars, higher bulk density and lower solubility. The type of the drying process affected mainly position of the gelatin-derived -OH and amide bands in FTIR spectra. Spray dried formulations compared to freeze dried expressed higher thermal stability as confirmed by differential scanning calorimetry analysis and higher diffusion coefficient; the last feature can be associated with the lower specific surface area of irregularly shaped freeze-dried particles (151-223 µm) compared to small microspheres (~8 µm) in spray-dried powder.
T2  - Preprints
T1  - Freeze versus Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material
DO  - 10.20944/preprints202105.0358.v1
UR  - https://hdl.handle.net/21.15107/rcub_dais_11637
ER  - 
@misc{
author = "Jovanović, Aleksandra A. and Lević, Steva and Pavlović, Vladimir B. and Marković, Smilja and Pjanović, Rada and Đorđević, Verica B. and Nedović, Viktor and Bugarski, Branko",
year = "2021",
abstract = "Freeze drying was compared with spray drying regarding feasibility to process wild thyme drug in order to obtain dry formulations at laboratory scale starting from liquid extracts produced by different extraction methods: maceration, heat-, ultrasound-, and microwave-assisted extractions. Higher powder yield (based on the dry weight prior to extraction) was achieved by freeze than spray drying and lower loss of total polyphenol content (TPC) and total flavonoid content (TFC) due to the drying process. Gelatin as a coating agent (5% w/w) provided better TPC recovery by 70% in case of lyophilization and higher powder yield in case of spray drying by diminishing material deposition on the wall of the drying chamber. The resulting gelatin-free and gelatin-containing powders carried polyphenols in amount ~190 and 53-75 mg gallic acid equivalents GAE/g of powder, respectively. Microwave-assisted extract formulation distinguished from others by higher content of polyphenols, proteins and sugars, higher bulk density and lower solubility. The type of the drying process affected mainly position of the gelatin-derived -OH and amide bands in FTIR spectra. Spray dried formulations compared to freeze dried expressed higher thermal stability as confirmed by differential scanning calorimetry analysis and higher diffusion coefficient; the last feature can be associated with the lower specific surface area of irregularly shaped freeze-dried particles (151-223 µm) compared to small microspheres (~8 µm) in spray-dried powder.",
journal = "Preprints",
title = "Freeze versus Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material",
doi = "10.20944/preprints202105.0358.v1",
url = "https://hdl.handle.net/21.15107/rcub_dais_11637"
}
Jovanović, A. A., Lević, S., Pavlović, V. B., Marković, S., Pjanović, R., Đorđević, V. B., Nedović, V.,& Bugarski, B.. (2021). Freeze versus Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material. in Preprints.
https://doi.org/10.20944/preprints202105.0358.v1
https://hdl.handle.net/21.15107/rcub_dais_11637
Jovanović AA, Lević S, Pavlović VB, Marković S, Pjanović R, Đorđević VB, Nedović V, Bugarski B. Freeze versus Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material. in Preprints. 2021;.
doi:10.20944/preprints202105.0358.v1
https://hdl.handle.net/21.15107/rcub_dais_11637 .
Jovanović, Aleksandra A., Lević, Steva, Pavlović, Vladimir B., Marković, Smilja, Pjanović, Rada, Đorđević, Verica B., Nedović, Viktor, Bugarski, Branko, "Freeze versus Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material" in Preprints (2021),
https://doi.org/10.20944/preprints202105.0358.v1 .,
https://hdl.handle.net/21.15107/rcub_dais_11637 .
1

Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics

Degli Esposti, Lorenzo; Marković, Smilja; Ignjatović, Nenad; Panseri, Silvia; Montesi, Monica; Adamiano, Alessio; Fosca, Marco; Rau, Julietta V.; Uskoković, Vuk; Iafisco, Michele

(Royal Society of Chemistry, 2021)

TY  - JOUR
AU  - Degli Esposti, Lorenzo
AU  - Marković, Smilja
AU  - Ignjatović, Nenad
AU  - Panseri, Silvia
AU  - Montesi, Monica
AU  - Adamiano, Alessio
AU  - Fosca, Marco
AU  - Rau, Julietta V.
AU  - Uskoković, Vuk
AU  - Iafisco, Michele
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11639
AB  - Amorphous calcium phosphate (ACP) is a material of high interest for dentistry, orthopedics, and other biomedical sectors. Being intrinsically metastable, the process of transformation of ACP into a crystalline phase upon heating is of high relevance for the development of innovative bioceramics. Here we have first studied the thermal behavior of a citrate-stabilized ACP (Cit-ACP) also doped with fluoride ions (Cit-FACP) prepared at three different nominal Cit/Ca ratios (i.e. 4, 2, 1) by differential thermal analysis. Next, the physico-chemical features of the crystalline products as well as the in vitro cell response to the materials were investigated. A citrate and fluoride free ACP sample was also tested as the blank. We have found that the activation energy of crystallization of Cit-(F)ACP samples is lower in comparison to the blank ACP and this is influenced by the nominal Cit/Ca molar ratio. Interestingly, we have discovered that the thermal treatment of Cit-(F)ACP at 800 °C yields hydroxyapatite (HA) or fluorapatite (FHA) as the main products differently from blank ACP that, like most of the ACPs reported in the literature, yields β-tricalcium phosphate. This was attributed to the Ca/P ratio of Cit-(F)ACP, which is similar to HA. A study of the crystalline products has revealed that all the (F)HA samples were non-cytotoxic, and retained carbonate ions in the crystal structure despite the heat treatment that should have induced decarbonation. The morphology of the products is influenced by the nominal Cit/Ca ratio and the presence of fluoride, ranging from spherical nanoparticles to micrometric hexagonal rods. Overall, our results prove that the thermal crystallization of Cit-(F)ACP is markedly different from classic ACP based materials and the thermal treatment of Cit-(F)ACP represents an attractive route for producing pure bioactive HA ceramics.
PB  - Royal Society of Chemistry
T2  - Journal of Materials Chemistry B
T1  - Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics
SP  - 4832
EP  - 4845
VL  - 9
IS  - 24
DO  - 10.1039/D1TB00601K
UR  - https://hdl.handle.net/21.15107/rcub_dais_11639
ER  - 
@article{
author = "Degli Esposti, Lorenzo and Marković, Smilja and Ignjatović, Nenad and Panseri, Silvia and Montesi, Monica and Adamiano, Alessio and Fosca, Marco and Rau, Julietta V. and Uskoković, Vuk and Iafisco, Michele",
year = "2021",
abstract = "Amorphous calcium phosphate (ACP) is a material of high interest for dentistry, orthopedics, and other biomedical sectors. Being intrinsically metastable, the process of transformation of ACP into a crystalline phase upon heating is of high relevance for the development of innovative bioceramics. Here we have first studied the thermal behavior of a citrate-stabilized ACP (Cit-ACP) also doped with fluoride ions (Cit-FACP) prepared at three different nominal Cit/Ca ratios (i.e. 4, 2, 1) by differential thermal analysis. Next, the physico-chemical features of the crystalline products as well as the in vitro cell response to the materials were investigated. A citrate and fluoride free ACP sample was also tested as the blank. We have found that the activation energy of crystallization of Cit-(F)ACP samples is lower in comparison to the blank ACP and this is influenced by the nominal Cit/Ca molar ratio. Interestingly, we have discovered that the thermal treatment of Cit-(F)ACP at 800 °C yields hydroxyapatite (HA) or fluorapatite (FHA) as the main products differently from blank ACP that, like most of the ACPs reported in the literature, yields β-tricalcium phosphate. This was attributed to the Ca/P ratio of Cit-(F)ACP, which is similar to HA. A study of the crystalline products has revealed that all the (F)HA samples were non-cytotoxic, and retained carbonate ions in the crystal structure despite the heat treatment that should have induced decarbonation. The morphology of the products is influenced by the nominal Cit/Ca ratio and the presence of fluoride, ranging from spherical nanoparticles to micrometric hexagonal rods. Overall, our results prove that the thermal crystallization of Cit-(F)ACP is markedly different from classic ACP based materials and the thermal treatment of Cit-(F)ACP represents an attractive route for producing pure bioactive HA ceramics.",
publisher = "Royal Society of Chemistry",
journal = "Journal of Materials Chemistry B",
title = "Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics",
pages = "4832-4845",
volume = "9",
number = "24",
doi = "10.1039/D1TB00601K",
url = "https://hdl.handle.net/21.15107/rcub_dais_11639"
}
Degli Esposti, L., Marković, S., Ignjatović, N., Panseri, S., Montesi, M., Adamiano, A., Fosca, M., Rau, J. V., Uskoković, V.,& Iafisco, M.. (2021). Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics. in Journal of Materials Chemistry B
Royal Society of Chemistry., 9(24), 4832-4845.
https://doi.org/10.1039/D1TB00601K
https://hdl.handle.net/21.15107/rcub_dais_11639
Degli Esposti L, Marković S, Ignjatović N, Panseri S, Montesi M, Adamiano A, Fosca M, Rau JV, Uskoković V, Iafisco M. Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics. in Journal of Materials Chemistry B. 2021;9(24):4832-4845.
doi:10.1039/D1TB00601K
https://hdl.handle.net/21.15107/rcub_dais_11639 .
Degli Esposti, Lorenzo, Marković, Smilja, Ignjatović, Nenad, Panseri, Silvia, Montesi, Monica, Adamiano, Alessio, Fosca, Marco, Rau, Julietta V., Uskoković, Vuk, Iafisco, Michele, "Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics" in Journal of Materials Chemistry B, 9, no. 24 (2021):4832-4845,
https://doi.org/10.1039/D1TB00601K .,
https://hdl.handle.net/21.15107/rcub_dais_11639 .
3
3
1

Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics

Degli Esposti, Lorenzo; Marković, Smilja; Ignjatović, Nenad; Panseri, Silvia; Montesi, Monica; Adamiano, Alessio; Fosca, Marco; Rau, Julietta V.; Uskoković, Vuk; Iafisco, Michele

(Royal Society of Chemistry, 2021)

TY  - JOUR
AU  - Degli Esposti, Lorenzo
AU  - Marković, Smilja
AU  - Ignjatović, Nenad
AU  - Panseri, Silvia
AU  - Montesi, Monica
AU  - Adamiano, Alessio
AU  - Fosca, Marco
AU  - Rau, Julietta V.
AU  - Uskoković, Vuk
AU  - Iafisco, Michele
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11640
AB  - Amorphous calcium phosphate (ACP) is a material of high interest for dentistry, orthopedics, and other biomedical sectors. Being intrinsically metastable, the process of transformation of ACP into a crystalline phase upon heating is of high relevance for the development of innovative bioceramics. Here we have first studied the thermal behavior of a citrate-stabilized ACP (Cit-ACP) also doped with fluoride ions (Cit-FACP) prepared at three different nominal Cit/Ca ratios (i.e. 4, 2, 1) by differential thermal analysis. Next, the physico-chemical features of the crystalline products as well as the in vitro cell response to the materials were investigated. A citrate and fluoride free ACP sample was also tested as the blank. We have found that the activation energy of crystallization of Cit-(F)ACP samples is lower in comparison to the blank ACP and this is influenced by the nominal Cit/Ca molar ratio. Interestingly, we have discovered that the thermal treatment of Cit-(F)ACP at 800 °C yields hydroxyapatite (HA) or fluorapatite (FHA) as the main products differently from blank ACP that, like most of the ACPs reported in the literature, yields β-tricalcium phosphate. This was attributed to the Ca/P ratio of Cit-(F)ACP, which is similar to HA. A study of the crystalline products has revealed that all the (F)HA samples were non-cytotoxic, and retained carbonate ions in the crystal structure despite the heat treatment that should have induced decarbonation. The morphology of the products is influenced by the nominal Cit/Ca ratio and the presence of fluoride, ranging from spherical nanoparticles to micrometric hexagonal rods. Overall, our results prove that the thermal crystallization of Cit-(F)ACP is markedly different from classic ACP based materials and the thermal treatment of Cit-(F)ACP represents an attractive route for producing pure bioactive HA ceramics.
PB  - Royal Society of Chemistry
T2  - Journal of Materials Chemistry B
T1  - Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics
SP  - 4832
EP  - 4845
VL  - 9
IS  - 24
DO  - 10.1039/D1TB00601K
UR  - https://hdl.handle.net/21.15107/rcub_dais_11640
ER  - 
@article{
author = "Degli Esposti, Lorenzo and Marković, Smilja and Ignjatović, Nenad and Panseri, Silvia and Montesi, Monica and Adamiano, Alessio and Fosca, Marco and Rau, Julietta V. and Uskoković, Vuk and Iafisco, Michele",
year = "2021",
abstract = "Amorphous calcium phosphate (ACP) is a material of high interest for dentistry, orthopedics, and other biomedical sectors. Being intrinsically metastable, the process of transformation of ACP into a crystalline phase upon heating is of high relevance for the development of innovative bioceramics. Here we have first studied the thermal behavior of a citrate-stabilized ACP (Cit-ACP) also doped with fluoride ions (Cit-FACP) prepared at three different nominal Cit/Ca ratios (i.e. 4, 2, 1) by differential thermal analysis. Next, the physico-chemical features of the crystalline products as well as the in vitro cell response to the materials were investigated. A citrate and fluoride free ACP sample was also tested as the blank. We have found that the activation energy of crystallization of Cit-(F)ACP samples is lower in comparison to the blank ACP and this is influenced by the nominal Cit/Ca molar ratio. Interestingly, we have discovered that the thermal treatment of Cit-(F)ACP at 800 °C yields hydroxyapatite (HA) or fluorapatite (FHA) as the main products differently from blank ACP that, like most of the ACPs reported in the literature, yields β-tricalcium phosphate. This was attributed to the Ca/P ratio of Cit-(F)ACP, which is similar to HA. A study of the crystalline products has revealed that all the (F)HA samples were non-cytotoxic, and retained carbonate ions in the crystal structure despite the heat treatment that should have induced decarbonation. The morphology of the products is influenced by the nominal Cit/Ca ratio and the presence of fluoride, ranging from spherical nanoparticles to micrometric hexagonal rods. Overall, our results prove that the thermal crystallization of Cit-(F)ACP is markedly different from classic ACP based materials and the thermal treatment of Cit-(F)ACP represents an attractive route for producing pure bioactive HA ceramics.",
publisher = "Royal Society of Chemistry",
journal = "Journal of Materials Chemistry B",
title = "Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics",
pages = "4832-4845",
volume = "9",
number = "24",
doi = "10.1039/D1TB00601K",
url = "https://hdl.handle.net/21.15107/rcub_dais_11640"
}
Degli Esposti, L., Marković, S., Ignjatović, N., Panseri, S., Montesi, M., Adamiano, A., Fosca, M., Rau, J. V., Uskoković, V.,& Iafisco, M.. (2021). Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics. in Journal of Materials Chemistry B
Royal Society of Chemistry., 9(24), 4832-4845.
https://doi.org/10.1039/D1TB00601K
https://hdl.handle.net/21.15107/rcub_dais_11640
Degli Esposti L, Marković S, Ignjatović N, Panseri S, Montesi M, Adamiano A, Fosca M, Rau JV, Uskoković V, Iafisco M. Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics. in Journal of Materials Chemistry B. 2021;9(24):4832-4845.
doi:10.1039/D1TB00601K
https://hdl.handle.net/21.15107/rcub_dais_11640 .
Degli Esposti, Lorenzo, Marković, Smilja, Ignjatović, Nenad, Panseri, Silvia, Montesi, Monica, Adamiano, Alessio, Fosca, Marco, Rau, Julietta V., Uskoković, Vuk, Iafisco, Michele, "Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics" in Journal of Materials Chemistry B, 9, no. 24 (2021):4832-4845,
https://doi.org/10.1039/D1TB00601K .,
https://hdl.handle.net/21.15107/rcub_dais_11640 .
3
3
1

Electronic Supplementary Information associated with the article: Degli Esposti Lorenzo, Marković Smilja, Ignjatović Nenad, Panseri Silvia, Montesi Monica, Adamiano Alessio, Fosca Marco, Rau Julietta V., Uskoković Vuk, Iafisco Michele, "Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics." Journal of Materials Chemistry B, 9, no. 24 (2021):4832-4845, https://doi.org/10.1039/D1TB00601K

Degli Esposti, Lorenzo; Marković, Smilja; Ignjatović, Nenad; Panseri, Silvia; Montesi, Monica; Adamiano, Alessio; Fosca, Marco; Rau, Julietta V.; Uskoković, Vuk; Iafisco, Michele

(Royal Society of Chemistry, 2021)

TY  - DATA
AU  - Degli Esposti, Lorenzo
AU  - Marković, Smilja
AU  - Ignjatović, Nenad
AU  - Panseri, Silvia
AU  - Montesi, Monica
AU  - Adamiano, Alessio
AU  - Fosca, Marco
AU  - Rau, Julietta V.
AU  - Uskoković, Vuk
AU  - Iafisco, Michele
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11642
AB  - Figure S1. The shift in the crystallization peak for (A) Cit-ACP-1 and (B) Cit-FACP-1 to higher temperatures in direct proportion with the heating rate; Figure S2. TGA curves of calcined Cit-ACP-4, Cit-ACP-2, and Cit-ACP-1; Figure S3. Pictures of calcined (A) Cit-ACP-4 and (B) Cit-ACP-1
PB  - Royal Society of Chemistry
T2  - Journal of Materials Chemistry B
T1  - Electronic Supplementary Information associated with the article: Degli Esposti Lorenzo, Marković Smilja, Ignjatović Nenad, Panseri Silvia, Montesi Monica, Adamiano Alessio, Fosca Marco, Rau Julietta V., Uskoković Vuk, Iafisco Michele, "Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics." Journal of Materials Chemistry B, 9, no. 24 (2021):4832-4845, https://doi.org/10.1039/D1TB00601K
VL  - 9
IS  - 24
UR  - https://hdl.handle.net/21.15107/rcub_dais_11642
ER  - 
@misc{
author = "Degli Esposti, Lorenzo and Marković, Smilja and Ignjatović, Nenad and Panseri, Silvia and Montesi, Monica and Adamiano, Alessio and Fosca, Marco and Rau, Julietta V. and Uskoković, Vuk and Iafisco, Michele",
year = "2021",
abstract = "Figure S1. The shift in the crystallization peak for (A) Cit-ACP-1 and (B) Cit-FACP-1 to higher temperatures in direct proportion with the heating rate; Figure S2. TGA curves of calcined Cit-ACP-4, Cit-ACP-2, and Cit-ACP-1; Figure S3. Pictures of calcined (A) Cit-ACP-4 and (B) Cit-ACP-1",
publisher = "Royal Society of Chemistry",
journal = "Journal of Materials Chemistry B",
title = "Electronic Supplementary Information associated with the article: Degli Esposti Lorenzo, Marković Smilja, Ignjatović Nenad, Panseri Silvia, Montesi Monica, Adamiano Alessio, Fosca Marco, Rau Julietta V., Uskoković Vuk, Iafisco Michele, "Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics." Journal of Materials Chemistry B, 9, no. 24 (2021):4832-4845, https://doi.org/10.1039/D1TB00601K",
volume = "9",
number = "24",
url = "https://hdl.handle.net/21.15107/rcub_dais_11642"
}
Degli Esposti, L., Marković, S., Ignjatović, N., Panseri, S., Montesi, M., Adamiano, A., Fosca, M., Rau, J. V., Uskoković, V.,& Iafisco, M.. (2021). Electronic Supplementary Information associated with the article: Degli Esposti Lorenzo, Marković Smilja, Ignjatović Nenad, Panseri Silvia, Montesi Monica, Adamiano Alessio, Fosca Marco, Rau Julietta V., Uskoković Vuk, Iafisco Michele, "Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics." Journal of Materials Chemistry B, 9, no. 24 (2021):4832-4845, https://doi.org/10.1039/D1TB00601K. in Journal of Materials Chemistry B
Royal Society of Chemistry., 9(24).
https://hdl.handle.net/21.15107/rcub_dais_11642
Degli Esposti L, Marković S, Ignjatović N, Panseri S, Montesi M, Adamiano A, Fosca M, Rau JV, Uskoković V, Iafisco M. Electronic Supplementary Information associated with the article: Degli Esposti Lorenzo, Marković Smilja, Ignjatović Nenad, Panseri Silvia, Montesi Monica, Adamiano Alessio, Fosca Marco, Rau Julietta V., Uskoković Vuk, Iafisco Michele, "Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics." Journal of Materials Chemistry B, 9, no. 24 (2021):4832-4845, https://doi.org/10.1039/D1TB00601K. in Journal of Materials Chemistry B. 2021;9(24).
https://hdl.handle.net/21.15107/rcub_dais_11642 .
Degli Esposti, Lorenzo, Marković, Smilja, Ignjatović, Nenad, Panseri, Silvia, Montesi, Monica, Adamiano, Alessio, Fosca, Marco, Rau, Julietta V., Uskoković, Vuk, Iafisco, Michele, "Electronic Supplementary Information associated with the article: Degli Esposti Lorenzo, Marković Smilja, Ignjatović Nenad, Panseri Silvia, Montesi Monica, Adamiano Alessio, Fosca Marco, Rau Julietta V., Uskoković Vuk, Iafisco Michele, "Thermal crystallization of amorphous calcium phosphate combined with citrate and fluoride doping: a novel route to produce hydroxyapatite bioceramics." Journal of Materials Chemistry B, 9, no. 24 (2021):4832-4845, https://doi.org/10.1039/D1TB00601K" in Journal of Materials Chemistry B, 9, no. 24 (2021),
https://hdl.handle.net/21.15107/rcub_dais_11642 .

Supplementary data for the article: P.M. Batinić, V.B. Đorđević, S.I. Stevanović, B.D. Balanč, S.B. Marković, N.D. Luković, D.Ž. Mijin, B.M. Bugarski, Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin, Journal of Drug Delivery Science and Technology, 2020, 59, 101920, doi: https://doi.org/10.1016/j.jddst.2020.101920

Batinić, Petar M.; Đorđević, Verica B.; Stevanović, Sanja; Balanč, Bojana D.; Marković, Smilja; Luković, Nevena D.; Mijin, Dušan; Bugarski, Branko

(2020)

TY  - DATA
AU  - Batinić, Petar M.
AU  - Đorđević, Verica B.
AU  - Stevanović, Sanja
AU  - Balanč, Bojana D.
AU  - Marković, Smilja
AU  - Luković, Nevena D.
AU  - Mijin, Dušan
AU  - Bugarski, Branko
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/9518
AB  - Figure S1. The spectrum of folic acid; Figure S2. The spectrum of histidine; Figure S3. The spectrum of phospholipon 90 G; Figure S4. The spectrum of cholesterol; Figure S5. The spectrum of SPAN 20
T2  - Journal of Drug Delivery Science and Technology
T1  - Supplementary data for the article: P.M. Batinić, V.B. Đorđević, S.I. Stevanović, B.D. Balanč, S.B. Marković, N.D. Luković, D.Ž. Mijin, B.M. Bugarski, Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin, Journal of Drug Delivery Science and Technology, 2020, 59, 101920, doi: https://doi.org/10.1016/j.jddst.2020.101920
SP  - 101920
VL  - 59
UR  - https://hdl.handle.net/21.15107/rcub_dais_9518
ER  - 
@misc{
author = "Batinić, Petar M. and Đorđević, Verica B. and Stevanović, Sanja and Balanč, Bojana D. and Marković, Smilja and Luković, Nevena D. and Mijin, Dušan and Bugarski, Branko",
year = "2020",
abstract = "Figure S1. The spectrum of folic acid; Figure S2. The spectrum of histidine; Figure S3. The spectrum of phospholipon 90 G; Figure S4. The spectrum of cholesterol; Figure S5. The spectrum of SPAN 20",
journal = "Journal of Drug Delivery Science and Technology",
title = "Supplementary data for the article: P.M. Batinić, V.B. Đorđević, S.I. Stevanović, B.D. Balanč, S.B. Marković, N.D. Luković, D.Ž. Mijin, B.M. Bugarski, Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin, Journal of Drug Delivery Science and Technology, 2020, 59, 101920, doi: https://doi.org/10.1016/j.jddst.2020.101920",
pages = "101920",
volume = "59",
url = "https://hdl.handle.net/21.15107/rcub_dais_9518"
}
Batinić, P. M., Đorđević, V. B., Stevanović, S., Balanč, B. D., Marković, S., Luković, N. D., Mijin, D.,& Bugarski, B.. (2020). Supplementary data for the article: P.M. Batinić, V.B. Đorđević, S.I. Stevanović, B.D. Balanč, S.B. Marković, N.D. Luković, D.Ž. Mijin, B.M. Bugarski, Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin, Journal of Drug Delivery Science and Technology, 2020, 59, 101920, doi: https://doi.org/10.1016/j.jddst.2020.101920. in Journal of Drug Delivery Science and Technology, 59, 101920.
https://hdl.handle.net/21.15107/rcub_dais_9518
Batinić PM, Đorđević VB, Stevanović S, Balanč BD, Marković S, Luković ND, Mijin D, Bugarski B. Supplementary data for the article: P.M. Batinić, V.B. Đorđević, S.I. Stevanović, B.D. Balanč, S.B. Marković, N.D. Luković, D.Ž. Mijin, B.M. Bugarski, Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin, Journal of Drug Delivery Science and Technology, 2020, 59, 101920, doi: https://doi.org/10.1016/j.jddst.2020.101920. in Journal of Drug Delivery Science and Technology. 2020;59:101920.
https://hdl.handle.net/21.15107/rcub_dais_9518 .
Batinić, Petar M., Đorđević, Verica B., Stevanović, Sanja, Balanč, Bojana D., Marković, Smilja, Luković, Nevena D., Mijin, Dušan, Bugarski, Branko, "Supplementary data for the article: P.M. Batinić, V.B. Đorđević, S.I. Stevanović, B.D. Balanč, S.B. Marković, N.D. Luković, D.Ž. Mijin, B.M. Bugarski, Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin, Journal of Drug Delivery Science and Technology, 2020, 59, 101920, doi: https://doi.org/10.1016/j.jddst.2020.101920" in Journal of Drug Delivery Science and Technology, 59 (2020):101920,
https://hdl.handle.net/21.15107/rcub_dais_9518 .

Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin

Batinić, Petar M.; Đorđević, Verica B.; Stevanović, Sanja; Balanč, Bojana; Marković, Smilja; Luković, Nevena D.; Mijin, Dušan; Bugarski, Branko

(Elsevier, 2020)

TY  - JOUR
AU  - Batinić, Petar M.
AU  - Đorđević, Verica B.
AU  - Stevanović, Sanja
AU  - Balanč, Bojana
AU  - Marković, Smilja
AU  - Luković, Nevena D.
AU  - Mijin, Dušan
AU  - Bugarski, Branko
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/9517
AB  - In this study, development of folic acid-loaded liposomes using a basic amino acid, histidine as a solubilizing agent for folic acid was presented, which tackled the poor solubility of this vitamin. The effect of the liposomal membrane modifiers, cholesterol and SPAN 20 on the characteristics of the final formulations was examined. Liposomes prepared from a commercially available purified soybean lecithin (Phospholipon 90G) by proliposome method were between 503 and 877 nm in average diameter, where cholesterol induced enlargement and SPAN.20 reduction of vesicles. High encapsulation efficiency of 84% and drug loading of 0.123 mg g−1 were achieved, irrespective to the composition. According to AFM images, folic acid-loaded liposomes of a fraction with a nano size were flattened compared to globular empty liposomes. FTIR analysis revealed possible interactions between phospholipids and histidine, while DSC study suggested interactions between folic acid and lipids during heating. Release study done by a Franz diffusion cell showed prolonged release of folic acid from liposomes and the release rate was determined by folic acid solubility.
PB  - Elsevier
T2  - Journal of Drug Delivery Science and Technology
T1  - Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin
SP  - 101920
VL  - 59
DO  - 10.1016/j.jddst.2020.101920
UR  - https://hdl.handle.net/21.15107/rcub_dais_9517
ER  - 
@article{
author = "Batinić, Petar M. and Đorđević, Verica B. and Stevanović, Sanja and Balanč, Bojana and Marković, Smilja and Luković, Nevena D. and Mijin, Dušan and Bugarski, Branko",
year = "2020",
abstract = "In this study, development of folic acid-loaded liposomes using a basic amino acid, histidine as a solubilizing agent for folic acid was presented, which tackled the poor solubility of this vitamin. The effect of the liposomal membrane modifiers, cholesterol and SPAN 20 on the characteristics of the final formulations was examined. Liposomes prepared from a commercially available purified soybean lecithin (Phospholipon 90G) by proliposome method were between 503 and 877 nm in average diameter, where cholesterol induced enlargement and SPAN.20 reduction of vesicles. High encapsulation efficiency of 84% and drug loading of 0.123 mg g−1 were achieved, irrespective to the composition. According to AFM images, folic acid-loaded liposomes of a fraction with a nano size were flattened compared to globular empty liposomes. FTIR analysis revealed possible interactions between phospholipids and histidine, while DSC study suggested interactions between folic acid and lipids during heating. Release study done by a Franz diffusion cell showed prolonged release of folic acid from liposomes and the release rate was determined by folic acid solubility.",
publisher = "Elsevier",
journal = "Journal of Drug Delivery Science and Technology",
title = "Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin",
pages = "101920",
volume = "59",
doi = "10.1016/j.jddst.2020.101920",
url = "https://hdl.handle.net/21.15107/rcub_dais_9517"
}
Batinić, P. M., Đorđević, V. B., Stevanović, S., Balanč, B., Marković, S., Luković, N. D., Mijin, D.,& Bugarski, B.. (2020). Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin. in Journal of Drug Delivery Science and Technology
Elsevier., 59, 101920.
https://doi.org/10.1016/j.jddst.2020.101920
https://hdl.handle.net/21.15107/rcub_dais_9517
Batinić PM, Đorđević VB, Stevanović S, Balanč B, Marković S, Luković ND, Mijin D, Bugarski B. Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin. in Journal of Drug Delivery Science and Technology. 2020;59:101920.
doi:10.1016/j.jddst.2020.101920
https://hdl.handle.net/21.15107/rcub_dais_9517 .
Batinić, Petar M., Đorđević, Verica B., Stevanović, Sanja, Balanč, Bojana, Marković, Smilja, Luković, Nevena D., Mijin, Dušan, Bugarski, Branko, "Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin" in Journal of Drug Delivery Science and Technology, 59 (2020):101920,
https://doi.org/10.1016/j.jddst.2020.101920 .,
https://hdl.handle.net/21.15107/rcub_dais_9517 .
1
1
1

Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin

Batinić, Petar M.; Đorđević, Verica B.; Stevanović, Sanja; Balanč, Bojana D.; Marković, Smilja B.; Luković, Nevena D.; Mijin, Dušan; Bugarski, Branko

(Elsevier, 2020)

TY  - JOUR
AU  - Batinić, Petar M.
AU  - Đorđević, Verica B.
AU  - Stevanović, Sanja
AU  - Balanč, Bojana D.
AU  - Marković, Smilja B.
AU  - Luković, Nevena D.
AU  - Mijin, Dušan
AU  - Bugarski, Branko
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/9516
AB  - In this study, development of folic acid-loaded liposomes using a basic amino acid, histidine as a solubilizing agent for folic acid was presented, which tackled the poor solubility of this vitamin. The effect of the liposomal membrane modifiers, cholesterol and SPAN 20 on the characteristics of the final formulations was examined. Liposomes prepared from a commercially available purified soybean lecithin (Phospholipon 90G) by proliposome method were between 503 and 877 nm in average diameter, where cholesterol induced enlargement and SPAN.20 reduction of vesicles. High encapsulation efficiency of 84% and drug loading of 0.123 mg g−1 were achieved, irrespective to the composition. According to AFM images, folic acid-loaded liposomes of a fraction with a nano size were flattened compared to globular empty liposomes. FTIR analysis revealed possible interactions between phospholipids and histidine, while DSC study suggested interactions between folic acid and lipids during heating. Release study done by a Franz diffusion cell showed prolonged release of folic acid from liposomes and the release rate was determined by folic acid solubility.
PB  - Elsevier
T2  - Journal of Drug Delivery Science and Technology
T1  - Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin
SP  - 101920
VL  - 59
DO  - 10.1016/j.jddst.2020.101920
UR  - https://hdl.handle.net/21.15107/rcub_dais_9516
ER  - 
@article{
author = "Batinić, Petar M. and Đorđević, Verica B. and Stevanović, Sanja and Balanč, Bojana D. and Marković, Smilja B. and Luković, Nevena D. and Mijin, Dušan and Bugarski, Branko",
year = "2020",
abstract = "In this study, development of folic acid-loaded liposomes using a basic amino acid, histidine as a solubilizing agent for folic acid was presented, which tackled the poor solubility of this vitamin. The effect of the liposomal membrane modifiers, cholesterol and SPAN 20 on the characteristics of the final formulations was examined. Liposomes prepared from a commercially available purified soybean lecithin (Phospholipon 90G) by proliposome method were between 503 and 877 nm in average diameter, where cholesterol induced enlargement and SPAN.20 reduction of vesicles. High encapsulation efficiency of 84% and drug loading of 0.123 mg g−1 were achieved, irrespective to the composition. According to AFM images, folic acid-loaded liposomes of a fraction with a nano size were flattened compared to globular empty liposomes. FTIR analysis revealed possible interactions between phospholipids and histidine, while DSC study suggested interactions between folic acid and lipids during heating. Release study done by a Franz diffusion cell showed prolonged release of folic acid from liposomes and the release rate was determined by folic acid solubility.",
publisher = "Elsevier",
journal = "Journal of Drug Delivery Science and Technology",
title = "Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin",
pages = "101920",
volume = "59",
doi = "10.1016/j.jddst.2020.101920",
url = "https://hdl.handle.net/21.15107/rcub_dais_9516"
}
Batinić, P. M., Đorđević, V. B., Stevanović, S., Balanč, B. D., Marković, S. B., Luković, N. D., Mijin, D.,& Bugarski, B.. (2020). Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin. in Journal of Drug Delivery Science and Technology
Elsevier., 59, 101920.
https://doi.org/10.1016/j.jddst.2020.101920
https://hdl.handle.net/21.15107/rcub_dais_9516
Batinić PM, Đorđević VB, Stevanović S, Balanč BD, Marković SB, Luković ND, Mijin D, Bugarski B. Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin. in Journal of Drug Delivery Science and Technology. 2020;59:101920.
doi:10.1016/j.jddst.2020.101920
https://hdl.handle.net/21.15107/rcub_dais_9516 .
Batinić, Petar M., Đorđević, Verica B., Stevanović, Sanja, Balanč, Bojana D., Marković, Smilja B., Luković, Nevena D., Mijin, Dušan, Bugarski, Branko, "Formulation and characterization of novel liposomes containing histidine for encapsulation of a poorly soluble vitamin" in Journal of Drug Delivery Science and Technology, 59 (2020):101920,
https://doi.org/10.1016/j.jddst.2020.101920 .,
https://hdl.handle.net/21.15107/rcub_dais_9516 .
1
1
1

Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Marković, Smilja; Blagojević, Vladimir A.; Lević, Steva; Savić, Slobodan; Đorđević, Antonije; Pavlović, Vladimir B.

(Springer, 2020)

TY  - JOUR
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Marković, Smilja
AU  - Blagojević, Vladimir A.
AU  - Lević, Steva
AU  - Savić, Slobodan
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10027
AB  - Solid-state mechanical activation of MgO and α-Al2O3 powders was used to produce MgAl2O4. The cation site occupancy in the resulting MgAl2O4 spinel was investigated using different methods. Differential thermal analysis and thermal gravimetry showed that mechanical activation reduced the spinel formation temperature by around 200 °C, and the corresponding activation energy by about 25%. In addition, characteristic temperatures for evaporation of physisorbed water and decomposition of Mg(OH)2 shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of the sintering temperature for all of the sintered specimens, indicating that the breaking point for ordering of the crystal structure was around 1500 °C for non-activated samples, and 1400 °C for activated samples.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics
SP  - 95
EP  - 107
VL  - 140
DO  - 10.1007/s10973-019-08846-w
UR  - https://hdl.handle.net/21.15107/rcub_dais_10027
ER  - 
@article{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Marković, Smilja and Blagojević, Vladimir A. and Lević, Steva and Savić, Slobodan and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2020",
abstract = "Solid-state mechanical activation of MgO and α-Al2O3 powders was used to produce MgAl2O4. The cation site occupancy in the resulting MgAl2O4 spinel was investigated using different methods. Differential thermal analysis and thermal gravimetry showed that mechanical activation reduced the spinel formation temperature by around 200 °C, and the corresponding activation energy by about 25%. In addition, characteristic temperatures for evaporation of physisorbed water and decomposition of Mg(OH)2 shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of the sintering temperature for all of the sintered specimens, indicating that the breaking point for ordering of the crystal structure was around 1500 °C for non-activated samples, and 1400 °C for activated samples.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics",
pages = "95-107",
volume = "140",
doi = "10.1007/s10973-019-08846-w",
url = "https://hdl.handle.net/21.15107/rcub_dais_10027"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Marković, S., Blagojević, V. A., Lević, S., Savić, S., Đorđević, A.,& Pavlović, V. B.. (2020). Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics. in Journal of Thermal Analysis and Calorimetry
Springer., 140, 95-107.
https://doi.org/10.1007/s10973-019-08846-w
https://hdl.handle.net/21.15107/rcub_dais_10027
Obradović N, Fahrenholtz WG, Filipović S, Marković S, Blagojević VA, Lević S, Savić S, Đorđević A, Pavlović VB. Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics. in Journal of Thermal Analysis and Calorimetry. 2020;140:95-107.
doi:10.1007/s10973-019-08846-w
https://hdl.handle.net/21.15107/rcub_dais_10027 .
Obradović, Nina, Fahrenholtz, William G., Filipović, Suzana, Marković, Smilja, Blagojević, Vladimir A., Lević, Steva, Savić, Slobodan, Đorđević, Antonije, Pavlović, Vladimir B., "Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics" in Journal of Thermal Analysis and Calorimetry, 140 (2020):95-107,
https://doi.org/10.1007/s10973-019-08846-w .,
https://hdl.handle.net/21.15107/rcub_dais_10027 .
1
2
2

Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis

Filipović, Suzana; Anđelković, Ljubica; Jeremić, Dejan; Vulić, Predrag; Nikolić, Aleksandar; Marković, Smilja; Paunović, Vesna; Lević, Steva; Pavlović, Vladimir B.

(Belgrade : ETRAN, 2020)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Anđelković, Ljubica
AU  - Jeremić, Dejan
AU  - Vulić, Predrag
AU  - Nikolić, Aleksandar
AU  - Marković, Smilja
AU  - Paunović, Vesna
AU  - Lević, Steva
AU  - Pavlović, Vladimir B.
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/9449
AB  - Barium titanate (BaTiO3) attracts high scientific and technological attention due to good dielectric and electromechanical properties. Although BaTiO3 is one of the most frequently investigated ferroelectric materials, the need for finding new and/or improved synthesis methods of this material still exists. In this paper, a novel, mild synthesis route for producing tetragonal BaTiO3 from barium nitrate and Ti-oxalate precursor is presented. Morphology of the prepared and subsequently sintered BaTiO3 was determined by SEM. Particle size distribution of the as prepared powder was monitored by the laser diffraction. The phase composition, structure and lattice dynamics were investigated by XRD and Raman spectroscopy. Finally, dielectric parameters were determined in the temperature range from 30 to 180 degrees C, and within a variety of frequencies. Curie temperature was detected at 130 degrees C.
PB  - Belgrade : ETRAN
T2  - Science of Sintering
T1  - Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis
SP  - 257
EP  - 268
VL  - 52
DO  - 10.2298/SOS2003257F
UR  - https://hdl.handle.net/21.15107/rcub_dais_9449
ER  - 
@article{
author = "Filipović, Suzana and Anđelković, Ljubica and Jeremić, Dejan and Vulić, Predrag and Nikolić, Aleksandar and Marković, Smilja and Paunović, Vesna and Lević, Steva and Pavlović, Vladimir B.",
year = "2020",
abstract = "Barium titanate (BaTiO3) attracts high scientific and technological attention due to good dielectric and electromechanical properties. Although BaTiO3 is one of the most frequently investigated ferroelectric materials, the need for finding new and/or improved synthesis methods of this material still exists. In this paper, a novel, mild synthesis route for producing tetragonal BaTiO3 from barium nitrate and Ti-oxalate precursor is presented. Morphology of the prepared and subsequently sintered BaTiO3 was determined by SEM. Particle size distribution of the as prepared powder was monitored by the laser diffraction. The phase composition, structure and lattice dynamics were investigated by XRD and Raman spectroscopy. Finally, dielectric parameters were determined in the temperature range from 30 to 180 degrees C, and within a variety of frequencies. Curie temperature was detected at 130 degrees C.",
publisher = "Belgrade : ETRAN",
journal = "Science of Sintering",
title = "Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis",
pages = "257-268",
volume = "52",
doi = "10.2298/SOS2003257F",
url = "https://hdl.handle.net/21.15107/rcub_dais_9449"
}
Filipović, S., Anđelković, L., Jeremić, D., Vulić, P., Nikolić, A., Marković, S., Paunović, V., Lević, S.,& Pavlović, V. B.. (2020). Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis. in Science of Sintering
Belgrade : ETRAN., 52, 257-268.
https://doi.org/10.2298/SOS2003257F
https://hdl.handle.net/21.15107/rcub_dais_9449
Filipović S, Anđelković L, Jeremić D, Vulić P, Nikolić A, Marković S, Paunović V, Lević S, Pavlović VB. Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis. in Science of Sintering. 2020;52:257-268.
doi:10.2298/SOS2003257F
https://hdl.handle.net/21.15107/rcub_dais_9449 .
Filipović, Suzana, Anđelković, Ljubica, Jeremić, Dejan, Vulić, Predrag, Nikolić, Aleksandar, Marković, Smilja, Paunović, Vesna, Lević, Steva, Pavlović, Vladimir B., "Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis" in Science of Sintering, 52 (2020):257-268,
https://doi.org/10.2298/SOS2003257F .,
https://hdl.handle.net/21.15107/rcub_dais_9449 .

Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Marković, Smilja; Blagojević, Vladimir A.; Lević, Steva; Savić, Slobodan; Đorđević, Antonije; Pavlović, Vladimir B.

(Springer, 2020)

TY  - JOUR
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Marković, Smilja
AU  - Blagojević, Vladimir A.
AU  - Lević, Steva
AU  - Savić, Slobodan
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2020
UR  - http://dais.sanu.ac.rs/123456789/6910
AB  - Solid-state mechanical activation of MgO and α-Al2O3 powders was used to produce MgAl2O4. The cation site occupancy in the resulting MgAl2O4 spinel was investigated using different methods. Differential thermal analysis and thermal gravimetry showed that mechanical activation reduced the spinel formation temperature by around 200 °C, and the corresponding activation energy by about 25%. In addition, characteristic temperatures for evaporation of physisorbed water and decomposition of Mg(OH)2 shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of the sintering temperature for all of the sintered specimens, indicating that the breaking point for ordering of the crystal structure was around 1500 °C for non-activated samples, and 1400 °C for activated samples.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics
SP  - 95
EP  - 107
VL  - 140
DO  - 10.1007/s10973-019-08846-w
UR  - https://hdl.handle.net/21.15107/rcub_dais_6910
ER  - 
@article{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Marković, Smilja and Blagojević, Vladimir A. and Lević, Steva and Savić, Slobodan and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2020",
abstract = "Solid-state mechanical activation of MgO and α-Al2O3 powders was used to produce MgAl2O4. The cation site occupancy in the resulting MgAl2O4 spinel was investigated using different methods. Differential thermal analysis and thermal gravimetry showed that mechanical activation reduced the spinel formation temperature by around 200 °C, and the corresponding activation energy by about 25%. In addition, characteristic temperatures for evaporation of physisorbed water and decomposition of Mg(OH)2 shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of the sintering temperature for all of the sintered specimens, indicating that the breaking point for ordering of the crystal structure was around 1500 °C for non-activated samples, and 1400 °C for activated samples.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics",
pages = "95-107",
volume = "140",
doi = "10.1007/s10973-019-08846-w",
url = "https://hdl.handle.net/21.15107/rcub_dais_6910"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Marković, S., Blagojević, V. A., Lević, S., Savić, S., Đorđević, A.,& Pavlović, V. B.. (2020). Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics. in Journal of Thermal Analysis and Calorimetry
Springer., 140, 95-107.
https://doi.org/10.1007/s10973-019-08846-w
https://hdl.handle.net/21.15107/rcub_dais_6910
Obradović N, Fahrenholtz WG, Filipović S, Marković S, Blagojević VA, Lević S, Savić S, Đorđević A, Pavlović VB. Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics. in Journal of Thermal Analysis and Calorimetry. 2020;140:95-107.
doi:10.1007/s10973-019-08846-w
https://hdl.handle.net/21.15107/rcub_dais_6910 .
Obradović, Nina, Fahrenholtz, William G., Filipović, Suzana, Marković, Smilja, Blagojević, Vladimir A., Lević, Steva, Savić, Slobodan, Đorđević, Antonije, Pavlović, Vladimir B., "Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics" in Journal of Thermal Analysis and Calorimetry, 140 (2020):95-107,
https://doi.org/10.1007/s10973-019-08846-w .,
https://hdl.handle.net/21.15107/rcub_dais_6910 .
1
2
2

Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry

Rajić, Vladimir; Stojković Simatović, Ivana; Veselinović, Ljiljana; Belošević Čavor, Jelena; Novaković, Mirjana; Popović, Maja; Škapin, Srečo Davor; Mojović, Miloš; Stojadinović, Stevan; Rac, Vladislav; Janković Častvan, Ivona; Marković, Smilja

(Royal Society of Chemistry, 2020)

TY  - JOUR
AU  - Rajić, Vladimir
AU  - Stojković Simatović, Ivana
AU  - Veselinović, Ljiljana
AU  - Belošević Čavor, Jelena
AU  - Novaković, Mirjana
AU  - Popović, Maja
AU  - Škapin, Srečo Davor
AU  - Mojović, Miloš
AU  - Stojadinović, Stevan
AU  - Rac, Vladislav
AU  - Janković Častvan, Ivona
AU  - Marković, Smilja
PY  - 2020
UR  - https://pubs.rsc.org/en/content/articlelanding/2020/cp/d0cp03377d
UR  - https://dais.sanu.ac.rs/123456789/9543
AB  - Eco-friendly and rapid microwave processing of a precipitate was used to produce Fe-doped zinc oxide (Zn1−xFexO, x = 0, 0.05, 0.1, 0.15 and 0.20; ZnO:Fe) nanoparticles, which were tested as catalysts toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in a moderately alkaline solution. The phase composition, crystal structure, morphology, textural properties, surface chemistry, optical properties and band structure were examined to comprehend the influence of Zn2+ partial substitution with Fe3+ on the catalytic activity of ZnO:Fe. Linear sweep voltammetry showed an improved catalytic activity of ZnO:5Fe toward the ORR, compared to pure ZnO, while with increased amounts of the Fe-dopant the activity decreased. The improvement was suggested by a more positive onset potential (0.394 V vs. RHE), current density (0.231 mA cm−2 at 0.150 V vs. RHE), and faster kinetics (Tafel slope, b = 248 mV dec−1), and it may be due to the synergistic effect of (1) a sufficient amount of surface oxygen vacancies, and (2) a certain amount of plate-like particles composed of crystallites with well developed (0001) and (000) facets. Quite the contrary, the OER study showed that the introduction of Fe3+ ions into the ZnO crystal structure resulted in enhanced catalytic activity of all ZnO:Fe samples, compared to pure ZnO, probably due to the modified binding energy and an optimized band structure. With the maximal current density of 1.066 mA cm−2 at 2.216 V vs. RHE, an onset potential of 1.856 V vs. RHE, and the smallest potential difference between the OER and ORR (ΔE = 1.58 V), ZnO:10Fe may be considered a promising bifunctional catalyst toward the OER/ORR in moderately alkaline solution. This study demonstrates that the electrocatalytic activity of ZnO:Fe strongly depends on the defect chemistry and consequently the band structure. Along with providing fundamental insight into the electrocatalytic activity of ZnO:Fe, the study also indicates an optimal stoichiometry for enhanced bifunctional activity toward the OER/ORR, compared to pure ZnO.
PB  - Royal Society of Chemistry
T2  - Physical Chemistry Chemical Physics
T1  - Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry
SP  - 22078
EP  - 22095
VL  - 22
IS  - 38
DO  - 10.1039/D0CP03377D
UR  - https://hdl.handle.net/21.15107/rcub_dais_9543
ER  - 
@article{
author = "Rajić, Vladimir and Stojković Simatović, Ivana and Veselinović, Ljiljana and Belošević Čavor, Jelena and Novaković, Mirjana and Popović, Maja and Škapin, Srečo Davor and Mojović, Miloš and Stojadinović, Stevan and Rac, Vladislav and Janković Častvan, Ivona and Marković, Smilja",
year = "2020",
abstract = "Eco-friendly and rapid microwave processing of a precipitate was used to produce Fe-doped zinc oxide (Zn1−xFexO, x = 0, 0.05, 0.1, 0.15 and 0.20; ZnO:Fe) nanoparticles, which were tested as catalysts toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in a moderately alkaline solution. The phase composition, crystal structure, morphology, textural properties, surface chemistry, optical properties and band structure were examined to comprehend the influence of Zn2+ partial substitution with Fe3+ on the catalytic activity of ZnO:Fe. Linear sweep voltammetry showed an improved catalytic activity of ZnO:5Fe toward the ORR, compared to pure ZnO, while with increased amounts of the Fe-dopant the activity decreased. The improvement was suggested by a more positive onset potential (0.394 V vs. RHE), current density (0.231 mA cm−2 at 0.150 V vs. RHE), and faster kinetics (Tafel slope, b = 248 mV dec−1), and it may be due to the synergistic effect of (1) a sufficient amount of surface oxygen vacancies, and (2) a certain amount of plate-like particles composed of crystallites with well developed (0001) and (000) facets. Quite the contrary, the OER study showed that the introduction of Fe3+ ions into the ZnO crystal structure resulted in enhanced catalytic activity of all ZnO:Fe samples, compared to pure ZnO, probably due to the modified binding energy and an optimized band structure. With the maximal current density of 1.066 mA cm−2 at 2.216 V vs. RHE, an onset potential of 1.856 V vs. RHE, and the smallest potential difference between the OER and ORR (ΔE = 1.58 V), ZnO:10Fe may be considered a promising bifunctional catalyst toward the OER/ORR in moderately alkaline solution. This study demonstrates that the electrocatalytic activity of ZnO:Fe strongly depends on the defect chemistry and consequently the band structure. Along with providing fundamental insight into the electrocatalytic activity of ZnO:Fe, the study also indicates an optimal stoichiometry for enhanced bifunctional activity toward the OER/ORR, compared to pure ZnO.",
publisher = "Royal Society of Chemistry",
journal = "Physical Chemistry Chemical Physics",
title = "Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry",
pages = "22078-22095",
volume = "22",
number = "38",
doi = "10.1039/D0CP03377D",
url = "https://hdl.handle.net/21.15107/rcub_dais_9543"
}
Rajić, V., Stojković Simatović, I., Veselinović, L., Belošević Čavor, J., Novaković, M., Popović, M., Škapin, S. D., Mojović, M., Stojadinović, S., Rac, V., Janković Častvan, I.,& Marković, S.. (2020). Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry. in Physical Chemistry Chemical Physics
Royal Society of Chemistry., 22(38), 22078-22095.
https://doi.org/10.1039/D0CP03377D
https://hdl.handle.net/21.15107/rcub_dais_9543
Rajić V, Stojković Simatović I, Veselinović L, Belošević Čavor J, Novaković M, Popović M, Škapin SD, Mojović M, Stojadinović S, Rac V, Janković Častvan I, Marković S. Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry. in Physical Chemistry Chemical Physics. 2020;22(38):22078-22095.
doi:10.1039/D0CP03377D
https://hdl.handle.net/21.15107/rcub_dais_9543 .
Rajić, Vladimir, Stojković Simatović, Ivana, Veselinović, Ljiljana, Belošević Čavor, Jelena, Novaković, Mirjana, Popović, Maja, Škapin, Srečo Davor, Mojović, Miloš, Stojadinović, Stevan, Rac, Vladislav, Janković Častvan, Ivona, Marković, Smilja, "Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry" in Physical Chemistry Chemical Physics, 22, no. 38 (2020):22078-22095,
https://doi.org/10.1039/D0CP03377D .,
https://hdl.handle.net/21.15107/rcub_dais_9543 .

Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry

Rajić, Vladimir; Stojković Simatović, Ivana; Veselinović, Ljiljana; Belošević Čavor, Jelena; Novaković, Mirjana; Popović, Maja; Škapin, Srečo Davor; Mojović, Miloš; Stojadinović, Stevan; Rac, Vladislav; Janković Častvan, Ivona; Marković, Smilja

(Royal Society of Chemistry, 2020)

TY  - JOUR
AU  - Rajić, Vladimir
AU  - Stojković Simatović, Ivana
AU  - Veselinović, Ljiljana
AU  - Belošević Čavor, Jelena
AU  - Novaković, Mirjana
AU  - Popović, Maja
AU  - Škapin, Srečo Davor
AU  - Mojović, Miloš
AU  - Stojadinović, Stevan
AU  - Rac, Vladislav
AU  - Janković Častvan, Ivona
AU  - Marković, Smilja
PY  - 2020
UR  - https://pubs.rsc.org/en/content/articlelanding/2020/cp/d0cp03377d
UR  - https://dais.sanu.ac.rs/123456789/9544
AB  - Eco-friendly and rapid microwave processing of a precipitate was used to produce Fe-doped zinc oxide (Zn1−xFexO, x = 0, 0.05, 0.1, 0.15 and 0.20; ZnO:Fe) nanoparticles, which were tested as catalysts toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in a moderately alkaline solution. The phase composition, crystal structure, morphology, textural properties, surface chemistry, optical properties and band structure were examined to comprehend the influence of Zn2+ partial substitution with Fe3+ on the catalytic activity of ZnO:Fe. Linear sweep voltammetry showed an improved catalytic activity of ZnO:5Fe toward the ORR, compared to pure ZnO, while with increased amounts of the Fe-dopant the activity decreased. The improvement was suggested by a more positive onset potential (0.394 V vs. RHE), current density (0.231 mA cm−2 at 0.150 V vs. RHE), and faster kinetics (Tafel slope, b = 248 mV dec−1), and it may be due to the synergistic effect of (1) a sufficient amount of surface oxygen vacancies, and (2) a certain amount of plate-like particles composed of crystallites with well developed (0001) and (000) facets. Quite the contrary, the OER study showed that the introduction of Fe3+ ions into the ZnO crystal structure resulted in enhanced catalytic activity of all ZnO:Fe samples, compared to pure ZnO, probably due to the modified binding energy and an optimized band structure. With the maximal current density of 1.066 mA cm−2 at 2.216 V vs. RHE, an onset potential of 1.856 V vs. RHE, and the smallest potential difference between the OER and ORR (ΔE = 1.58 V), ZnO:10Fe may be considered a promising bifunctional catalyst toward the OER/ORR in moderately alkaline solution. This study demonstrates that the electrocatalytic activity of ZnO:Fe strongly depends on the defect chemistry and consequently the band structure. Along with providing fundamental insight into the electrocatalytic activity of ZnO:Fe, the study also indicates an optimal stoichiometry for enhanced bifunctional activity toward the OER/ORR, compared to pure ZnO.
PB  - Royal Society of Chemistry
T2  - Physical Chemistry Chemical Physics
T1  - Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry
SP  - 22078
EP  - 22095
VL  - 22
IS  - 38
DO  - 10.1039/D0CP03377D
UR  - https://hdl.handle.net/21.15107/rcub_dais_9544
ER  - 
@article{
author = "Rajić, Vladimir and Stojković Simatović, Ivana and Veselinović, Ljiljana and Belošević Čavor, Jelena and Novaković, Mirjana and Popović, Maja and Škapin, Srečo Davor and Mojović, Miloš and Stojadinović, Stevan and Rac, Vladislav and Janković Častvan, Ivona and Marković, Smilja",
year = "2020",
abstract = "Eco-friendly and rapid microwave processing of a precipitate was used to produce Fe-doped zinc oxide (Zn1−xFexO, x = 0, 0.05, 0.1, 0.15 and 0.20; ZnO:Fe) nanoparticles, which were tested as catalysts toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in a moderately alkaline solution. The phase composition, crystal structure, morphology, textural properties, surface chemistry, optical properties and band structure were examined to comprehend the influence of Zn2+ partial substitution with Fe3+ on the catalytic activity of ZnO:Fe. Linear sweep voltammetry showed an improved catalytic activity of ZnO:5Fe toward the ORR, compared to pure ZnO, while with increased amounts of the Fe-dopant the activity decreased. The improvement was suggested by a more positive onset potential (0.394 V vs. RHE), current density (0.231 mA cm−2 at 0.150 V vs. RHE), and faster kinetics (Tafel slope, b = 248 mV dec−1), and it may be due to the synergistic effect of (1) a sufficient amount of surface oxygen vacancies, and (2) a certain amount of plate-like particles composed of crystallites with well developed (0001) and (000) facets. Quite the contrary, the OER study showed that the introduction of Fe3+ ions into the ZnO crystal structure resulted in enhanced catalytic activity of all ZnO:Fe samples, compared to pure ZnO, probably due to the modified binding energy and an optimized band structure. With the maximal current density of 1.066 mA cm−2 at 2.216 V vs. RHE, an onset potential of 1.856 V vs. RHE, and the smallest potential difference between the OER and ORR (ΔE = 1.58 V), ZnO:10Fe may be considered a promising bifunctional catalyst toward the OER/ORR in moderately alkaline solution. This study demonstrates that the electrocatalytic activity of ZnO:Fe strongly depends on the defect chemistry and consequently the band structure. Along with providing fundamental insight into the electrocatalytic activity of ZnO:Fe, the study also indicates an optimal stoichiometry for enhanced bifunctional activity toward the OER/ORR, compared to pure ZnO.",
publisher = "Royal Society of Chemistry",
journal = "Physical Chemistry Chemical Physics",
title = "Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry",
pages = "22078-22095",
volume = "22",
number = "38",
doi = "10.1039/D0CP03377D",
url = "https://hdl.handle.net/21.15107/rcub_dais_9544"
}
Rajić, V., Stojković Simatović, I., Veselinović, L., Belošević Čavor, J., Novaković, M., Popović, M., Škapin, S. D., Mojović, M., Stojadinović, S., Rac, V., Janković Častvan, I.,& Marković, S.. (2020). Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry. in Physical Chemistry Chemical Physics
Royal Society of Chemistry., 22(38), 22078-22095.
https://doi.org/10.1039/D0CP03377D
https://hdl.handle.net/21.15107/rcub_dais_9544
Rajić V, Stojković Simatović I, Veselinović L, Belošević Čavor J, Novaković M, Popović M, Škapin SD, Mojović M, Stojadinović S, Rac V, Janković Častvan I, Marković S. Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry. in Physical Chemistry Chemical Physics. 2020;22(38):22078-22095.
doi:10.1039/D0CP03377D
https://hdl.handle.net/21.15107/rcub_dais_9544 .
Rajić, Vladimir, Stojković Simatović, Ivana, Veselinović, Ljiljana, Belošević Čavor, Jelena, Novaković, Mirjana, Popović, Maja, Škapin, Srečo Davor, Mojović, Miloš, Stojadinović, Stevan, Rac, Vladislav, Janković Častvan, Ivona, Marković, Smilja, "Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry" in Physical Chemistry Chemical Physics, 22, no. 38 (2020):22078-22095,
https://doi.org/10.1039/D0CP03377D .,
https://hdl.handle.net/21.15107/rcub_dais_9544 .

Self-limiting interactions in 2D–0D system: A case study of graphene oxide and 12-tungstophosphoric acid nanocomposite

Jovanović, Zoran; Mravik, Željko; Bajuk Bogdanović, Danica; Jovanović, Sonja; Marković, Smilja; Vujković, Milica; Kovač, Janez; Vengust, Damjan; Uskoković-Marković, Snežana; Holclajtner Antunović, Ivanka

(2020)

TY  - JOUR
AU  - Jovanović, Zoran
AU  - Mravik, Željko
AU  - Bajuk Bogdanović, Danica
AU  - Jovanović, Sonja
AU  - Marković, Smilja
AU  - Vujković, Milica
AU  - Kovač, Janez
AU  - Vengust, Damjan
AU  - Uskoković-Marković, Snežana
AU  - Holclajtner Antunović, Ivanka
PY  - 2020
UR  - http://dais.sanu.ac.rs/123456789/6882
AB  - In the present study we investigated the interaction between 12-tungstophosphoric acid (WPA) and graphene oxide (GO) in their nanocomposite by utilizing the loading of WPA as an intrinsic parameter for interaction tuning. The Fourier-transform infrared spectroscopy, temperature-programmed desorption, X-ray photoelectron spectroscopy, zeta-potential measurements, thermogravimetric analysis, X-ray diffraction, Raman spectroscopy and transmission electron microscopy methods revealed that ∼5–13 wt% of WPA represents critical loading that separates two distinct contributions to GO-WPA interaction. This was explained by the self-limiting nature of GO-WPA interaction, initially controlled by high dispersion of WPA on GO (up to 13 wt%), that is eventually overpowered by WPA-WPA interaction as loading increases. As a result, the WPA agglomerates are being formed because of which the hybrid character of the nanocomposite diminishes, i.e., the properties of independent components start to be manifested to greater extent. The obtained results provide an important framework for considering possible outcomes in other 2D-0D systems, whose interaction is relevant both from fundamental and applicative point of view. Thus, the GO/WPA nanocomposite illustrates how the interactions between the components can be used for tuning the properties of nanocomposite as a whole.
T2  - Carbon
T1  - Self-limiting interactions in 2D–0D system: A case study of graphene oxide and 12-tungstophosphoric acid nanocomposite
SP  - 166
EP  - 178
VL  - 156
DO  - 10.1016/j.carbon.2019.09.072
UR  - https://hdl.handle.net/21.15107/rcub_dais_6882
ER  - 
@article{
author = "Jovanović, Zoran and Mravik, Željko and Bajuk Bogdanović, Danica and Jovanović, Sonja and Marković, Smilja and Vujković, Milica and Kovač, Janez and Vengust, Damjan and Uskoković-Marković, Snežana and Holclajtner Antunović, Ivanka",
year = "2020",
abstract = "In the present study we investigated the interaction between 12-tungstophosphoric acid (WPA) and graphene oxide (GO) in their nanocomposite by utilizing the loading of WPA as an intrinsic parameter for interaction tuning. The Fourier-transform infrared spectroscopy, temperature-programmed desorption, X-ray photoelectron spectroscopy, zeta-potential measurements, thermogravimetric analysis, X-ray diffraction, Raman spectroscopy and transmission electron microscopy methods revealed that ∼5–13 wt% of WPA represents critical loading that separates two distinct contributions to GO-WPA interaction. This was explained by the self-limiting nature of GO-WPA interaction, initially controlled by high dispersion of WPA on GO (up to 13 wt%), that is eventually overpowered by WPA-WPA interaction as loading increases. As a result, the WPA agglomerates are being formed because of which the hybrid character of the nanocomposite diminishes, i.e., the properties of independent components start to be manifested to greater extent. The obtained results provide an important framework for considering possible outcomes in other 2D-0D systems, whose interaction is relevant both from fundamental and applicative point of view. Thus, the GO/WPA nanocomposite illustrates how the interactions between the components can be used for tuning the properties of nanocomposite as a whole.",
journal = "Carbon",
title = "Self-limiting interactions in 2D–0D system: A case study of graphene oxide and 12-tungstophosphoric acid nanocomposite",
pages = "166-178",
volume = "156",
doi = "10.1016/j.carbon.2019.09.072",
url = "https://hdl.handle.net/21.15107/rcub_dais_6882"
}
Jovanović, Z., Mravik, Ž., Bajuk Bogdanović, D., Jovanović, S., Marković, S., Vujković, M., Kovač, J., Vengust, D., Uskoković-Marković, S.,& Holclajtner Antunović, I.. (2020). Self-limiting interactions in 2D–0D system: A case study of graphene oxide and 12-tungstophosphoric acid nanocomposite. in Carbon, 156, 166-178.
https://doi.org/10.1016/j.carbon.2019.09.072
https://hdl.handle.net/21.15107/rcub_dais_6882
Jovanović Z, Mravik Ž, Bajuk Bogdanović D, Jovanović S, Marković S, Vujković M, Kovač J, Vengust D, Uskoković-Marković S, Holclajtner Antunović I. Self-limiting interactions in 2D–0D system: A case study of graphene oxide and 12-tungstophosphoric acid nanocomposite. in Carbon. 2020;156:166-178.
doi:10.1016/j.carbon.2019.09.072
https://hdl.handle.net/21.15107/rcub_dais_6882 .
Jovanović, Zoran, Mravik, Željko, Bajuk Bogdanović, Danica, Jovanović, Sonja, Marković, Smilja, Vujković, Milica, Kovač, Janez, Vengust, Damjan, Uskoković-Marković, Snežana, Holclajtner Antunović, Ivanka, "Self-limiting interactions in 2D–0D system: A case study of graphene oxide and 12-tungstophosphoric acid nanocomposite" in Carbon, 156 (2020):166-178,
https://doi.org/10.1016/j.carbon.2019.09.072 .,
https://hdl.handle.net/21.15107/rcub_dais_6882 .
5
3
5

Chitosan nanobeads loaded with Biginelli hybrids as cell-selective toxicity systems with a homogeneous distribution of the cell cycle in cancer treatment

Ristovski (Trifunović), Jovana; Žižak, Željko; Marković, Smilja; Janković, Nenad; Ignjatović, Nenad

(Royal Society of Chemistry, 2020)

TY  - JOUR
AU  - Ristovski (Trifunović), Jovana
AU  - Žižak, Željko
AU  - Marković, Smilja
AU  - Janković, Nenad
AU  - Ignjatović, Nenad
PY  - 2020
UR  - https://pubs.rsc.org/en/content/articlelanding/2020/ra/d0ra08085c
UR  - https://dais.sanu.ac.rs/123456789/9814
AB  - Tetrahydropyrimidines are a class of azaheterocycles, also called Biginelli hybrids (obtained from the Biginelli reaction), that have attracted an enormous interest in the medicinal chemistry community in recent years, due to a broad biological activity, such as anticancer, antiviral, anti-inflammatory, antidiabetic, antituberculosis activities, etc. According to SciFinder®, more than 70 000 different Biginelli-like compounds have been covered in publications. However, although the Biginelli reaction can yield a large number of compounds with a broad range of activities, none of them have been captured in a carrier. In this study, chitosan-based (Ch) nanoparticles (NPs) containing three different molecules (Biginelli hybrids) were developed and tested for the first time as simple and promising vehicles for anticancer Biginelli-based drugs. The key features of NPs, such as size, surface morphology, drug encapsulation efficiency, and in vitro release were systematically investigated. Rather weak cell selectivity of pure Biginelli hybrids (A–C) to selected cancer cell lines has improved and this has been accompanied with two-to-four times stronger cytotoxic effect of A–C loaded Ch NPs, with a triple reduction in toxicity to healthy cells (MRC-5). It has been observed that the examined NPs induce apoptosis. The cell cycle analysis has confirmed the influence of A-loaded Ch (A-Ch), B-loaded Ch (B-Ch), and C-loaded Ch (C-Ch) on the cell cycle distribution, which was homogenously affected. This is the difference with regard to the effect of A, B, and C on the cell cycle. It has been established that the increased selectivity and antitumor activity of NPs are related to the presence of the carrier.
PB  - Royal Society of Chemistry
T2  - RSC Advances
T1  - Chitosan nanobeads loaded with Biginelli hybrids as cell-selective toxicity systems with a homogeneous distribution of the cell cycle in cancer treatment
SP  - 41542
EP  - 41550
VL  - 10
IS  - 68
DO  - 10.1039/D0RA08085C
UR  - https://hdl.handle.net/21.15107/rcub_dais_9814
ER  - 
@article{
author = "Ristovski (Trifunović), Jovana and Žižak, Željko and Marković, Smilja and Janković, Nenad and Ignjatović, Nenad",
year = "2020",
abstract = "Tetrahydropyrimidines are a class of azaheterocycles, also called Biginelli hybrids (obtained from the Biginelli reaction), that have attracted an enormous interest in the medicinal chemistry community in recent years, due to a broad biological activity, such as anticancer, antiviral, anti-inflammatory, antidiabetic, antituberculosis activities, etc. According to SciFinder®, more than 70 000 different Biginelli-like compounds have been covered in publications. However, although the Biginelli reaction can yield a large number of compounds with a broad range of activities, none of them have been captured in a carrier. In this study, chitosan-based (Ch) nanoparticles (NPs) containing three different molecules (Biginelli hybrids) were developed and tested for the first time as simple and promising vehicles for anticancer Biginelli-based drugs. The key features of NPs, such as size, surface morphology, drug encapsulation efficiency, and in vitro release were systematically investigated. Rather weak cell selectivity of pure Biginelli hybrids (A–C) to selected cancer cell lines has improved and this has been accompanied with two-to-four times stronger cytotoxic effect of A–C loaded Ch NPs, with a triple reduction in toxicity to healthy cells (MRC-5). It has been observed that the examined NPs induce apoptosis. The cell cycle analysis has confirmed the influence of A-loaded Ch (A-Ch), B-loaded Ch (B-Ch), and C-loaded Ch (C-Ch) on the cell cycle distribution, which was homogenously affected. This is the difference with regard to the effect of A, B, and C on the cell cycle. It has been established that the increased selectivity and antitumor activity of NPs are related to the presence of the carrier.",
publisher = "Royal Society of Chemistry",
journal = "RSC Advances",
title = "Chitosan nanobeads loaded with Biginelli hybrids as cell-selective toxicity systems with a homogeneous distribution of the cell cycle in cancer treatment",
pages = "41542-41550",
volume = "10",
number = "68",
doi = "10.1039/D0RA08085C",
url = "https://hdl.handle.net/21.15107/rcub_dais_9814"
}
Ristovski (Trifunović), J., Žižak, Ž., Marković, S., Janković, N.,& Ignjatović, N.. (2020). Chitosan nanobeads loaded with Biginelli hybrids as cell-selective toxicity systems with a homogeneous distribution of the cell cycle in cancer treatment. in RSC Advances
Royal Society of Chemistry., 10(68), 41542-41550.
https://doi.org/10.1039/D0RA08085C
https://hdl.handle.net/21.15107/rcub_dais_9814
Ristovski (Trifunović) J, Žižak Ž, Marković S, Janković N, Ignjatović N. Chitosan nanobeads loaded with Biginelli hybrids as cell-selective toxicity systems with a homogeneous distribution of the cell cycle in cancer treatment. in RSC Advances. 2020;10(68):41542-41550.
doi:10.1039/D0RA08085C
https://hdl.handle.net/21.15107/rcub_dais_9814 .
Ristovski (Trifunović), Jovana, Žižak, Željko, Marković, Smilja, Janković, Nenad, Ignjatović, Nenad, "Chitosan nanobeads loaded with Biginelli hybrids as cell-selective toxicity systems with a homogeneous distribution of the cell cycle in cancer treatment" in RSC Advances, 10, no. 68 (2020):41542-41550,
https://doi.org/10.1039/D0RA08085C .,
https://hdl.handle.net/21.15107/rcub_dais_9814 .
1

Electronic Supplementary Information associated with the paper: Ristovski (Trifunović), J., Žižak, Ž., Marković, S., Janković, N., Ignjatović, N., 2020. Chitosan nanobeads loaded with Biginelli hybrids as cell-selective toxicity systems with a homogeneous distribution of the cell cycle in cancer treatment. RSC Adv. 10, 41542–41550. https://doi.org/10.1039/D0RA08085C

Ristovski (Trifunović), Jovana; Žižak, Željko; Marković, Smilja; Janković, Nenad; Ignjatović, Nenad

(Royal Society of Chemistry, 2020)

TY  - DATA
AU  - Ristovski (Trifunović), Jovana
AU  - Žižak, Željko
AU  - Marković, Smilja
AU  - Janković, Nenad
AU  - Ignjatović, Nenad
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/9815
PB  - Royal Society of Chemistry
T2  - RSC Advances
T1  - Electronic Supplementary Information associated with the paper: Ristovski (Trifunović), J., Žižak, Ž., Marković, S., Janković, N., Ignjatović, N., 2020. Chitosan nanobeads loaded with Biginelli hybrids as cell-selective toxicity systems with a homogeneous distribution of the cell cycle in cancer treatment. RSC Adv. 10, 41542–41550. https://doi.org/10.1039/D0RA08085C
VL  - 10
IS  - 68
UR  - https://hdl.handle.net/21.15107/rcub_dais_9815
ER  - 
@misc{
author = "Ristovski (Trifunović), Jovana and Žižak, Željko and Marković, Smilja and Janković, Nenad and Ignjatović, Nenad",
year = "2020",
publisher = "Royal Society of Chemistry",
journal = "RSC Advances",
title = "Electronic Supplementary Information associated with the paper: Ristovski (Trifunović), J., Žižak, Ž., Marković, S., Janković, N., Ignjatović, N., 2020. Chitosan nanobeads loaded with Biginelli hybrids as cell-selective toxicity systems with a homogeneous distribution of the cell cycle in cancer treatment. RSC Adv. 10, 41542–41550. https://doi.org/10.1039/D0RA08085C",
volume = "10",
number = "68",
url = "https://hdl.handle.net/21.15107/rcub_dais_9815"
}
Ristovski (Trifunović), J., Žižak, Ž., Marković, S., Janković, N.,& Ignjatović, N.. (2020). Electronic Supplementary Information associated with the paper: Ristovski (Trifunović), J., Žižak, Ž., Marković, S., Janković, N., Ignjatović, N., 2020. Chitosan nanobeads loaded with Biginelli hybrids as cell-selective toxicity systems with a homogeneous distribution of the cell cycle in cancer treatment. RSC Adv. 10, 41542–41550. https://doi.org/10.1039/D0RA08085C. in RSC Advances
Royal Society of Chemistry., 10(68).
https://hdl.handle.net/21.15107/rcub_dais_9815
Ristovski (Trifunović) J, Žižak Ž, Marković S, Janković N, Ignjatović N. Electronic Supplementary Information associated with the paper: Ristovski (Trifunović), J., Žižak, Ž., Marković, S., Janković, N., Ignjatović, N., 2020. Chitosan nanobeads loaded with Biginelli hybrids as cell-selective toxicity systems with a homogeneous distribution of the cell cycle in cancer treatment. RSC Adv. 10, 41542–41550. https://doi.org/10.1039/D0RA08085C. in RSC Advances. 2020;10(68).
https://hdl.handle.net/21.15107/rcub_dais_9815 .
Ristovski (Trifunović), Jovana, Žižak, Željko, Marković, Smilja, Janković, Nenad, Ignjatović, Nenad, "Electronic Supplementary Information associated with the paper: Ristovski (Trifunović), J., Žižak, Ž., Marković, S., Janković, N., Ignjatović, N., 2020. Chitosan nanobeads loaded with Biginelli hybrids as cell-selective toxicity systems with a homogeneous distribution of the cell cycle in cancer treatment. RSC Adv. 10, 41542–41550. https://doi.org/10.1039/D0RA08085C" in RSC Advances, 10, no. 68 (2020),
https://hdl.handle.net/21.15107/rcub_dais_9815 .

Modification of TiO2 and ZnO Particles Under Mechanical Stress with Polypropylene

Skurikhina, Olha; Tothova, Erika; Marković, Smilja; Senna, Mamoru

(Springer Netherlands, 2020)

TY  - CONF
AU  - Skurikhina, Olha
AU  - Tothova, Erika
AU  - Marković, Smilja
AU  - Senna, Mamoru
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/9949
AB  - Solid-state process of introducing oxygen vacancies into the structure of TiO2 and ZnO particles was studied. The phase transformations of metal oxides throughout the process were examined by X-ray diffraction (XRD). The influence of the loaded mechanical stress on the band gap was studied by diffuse reflectance spectroscopy (DRS). Mechanism of elimination of oxygen atoms from the surface of the oxides by co-milling with polyolefins, which can lead to creation of more effective materials for waste water treatment, was proposed.
PB  - Springer Netherlands
C3  - Nanoscience and Nanotechnology in Security and Protection against CBRN Threats
T1  - Modification of TiO2 and ZnO Particles Under Mechanical Stress with Polypropylene
SP  - 209
EP  - 213
DO  - 10.1007/978-94-024-2018-0_16
UR  - https://hdl.handle.net/21.15107/rcub_dais_9949
ER  - 
@conference{
author = "Skurikhina, Olha and Tothova, Erika and Marković, Smilja and Senna, Mamoru",
year = "2020",
abstract = "Solid-state process of introducing oxygen vacancies into the structure of TiO2 and ZnO particles was studied. The phase transformations of metal oxides throughout the process were examined by X-ray diffraction (XRD). The influence of the loaded mechanical stress on the band gap was studied by diffuse reflectance spectroscopy (DRS). Mechanism of elimination of oxygen atoms from the surface of the oxides by co-milling with polyolefins, which can lead to creation of more effective materials for waste water treatment, was proposed.",
publisher = "Springer Netherlands",
journal = "Nanoscience and Nanotechnology in Security and Protection against CBRN Threats",
title = "Modification of TiO2 and ZnO Particles Under Mechanical Stress with Polypropylene",
pages = "209-213",
doi = "10.1007/978-94-024-2018-0_16",
url = "https://hdl.handle.net/21.15107/rcub_dais_9949"
}
Skurikhina, O., Tothova, E., Marković, S.,& Senna, M.. (2020). Modification of TiO2 and ZnO Particles Under Mechanical Stress with Polypropylene. in Nanoscience and Nanotechnology in Security and Protection against CBRN Threats
Springer Netherlands., 209-213.
https://doi.org/10.1007/978-94-024-2018-0_16
https://hdl.handle.net/21.15107/rcub_dais_9949
Skurikhina O, Tothova E, Marković S, Senna M. Modification of TiO2 and ZnO Particles Under Mechanical Stress with Polypropylene. in Nanoscience and Nanotechnology in Security and Protection against CBRN Threats. 2020;:209-213.
doi:10.1007/978-94-024-2018-0_16
https://hdl.handle.net/21.15107/rcub_dais_9949 .
Skurikhina, Olha, Tothova, Erika, Marković, Smilja, Senna, Mamoru, "Modification of TiO2 and ZnO Particles Under Mechanical Stress with Polypropylene" in Nanoscience and Nanotechnology in Security and Protection against CBRN Threats (2020):209-213,
https://doi.org/10.1007/978-94-024-2018-0_16 .,
https://hdl.handle.net/21.15107/rcub_dais_9949 .

Modification of TiO2 and ZnO Particles Under Mechanical Stress with Polypropylene

Skurikhina, Olha; Tothova, Erika; Marković, Smilja; Senna, Mamoru

(Springer Netherlands, 2020)

TY  - CONF
AU  - Skurikhina, Olha
AU  - Tothova, Erika
AU  - Marković, Smilja
AU  - Senna, Mamoru
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/9950
AB  - Solid-state process of introducing oxygen vacancies into the structure of TiO2 and ZnO particles was studied. The phase transformations of metal oxides throughout the process were examined by X-ray diffraction (XRD). The influence of the loaded mechanical stress on the band gap was studied by diffuse reflectance spectroscopy (DRS). Mechanism of elimination of oxygen atoms from the surface of the oxides by co-milling with polyolefins, which can lead to creation of more effective materials for waste water treatment, was proposed.
PB  - Springer Netherlands
C3  - Nanoscience and Nanotechnology in Security and Protection against CBRN Threats
T1  - Modification of TiO2 and ZnO Particles Under Mechanical Stress with Polypropylene
SP  - 209
EP  - 213
DO  - 10.1007/978-94-024-2018-0_16
UR  - https://hdl.handle.net/21.15107/rcub_dais_9950
ER  - 
@conference{
author = "Skurikhina, Olha and Tothova, Erika and Marković, Smilja and Senna, Mamoru",
year = "2020",
abstract = "Solid-state process of introducing oxygen vacancies into the structure of TiO2 and ZnO particles was studied. The phase transformations of metal oxides throughout the process were examined by X-ray diffraction (XRD). The influence of the loaded mechanical stress on the band gap was studied by diffuse reflectance spectroscopy (DRS). Mechanism of elimination of oxygen atoms from the surface of the oxides by co-milling with polyolefins, which can lead to creation of more effective materials for waste water treatment, was proposed.",
publisher = "Springer Netherlands",
journal = "Nanoscience and Nanotechnology in Security and Protection against CBRN Threats",
title = "Modification of TiO2 and ZnO Particles Under Mechanical Stress with Polypropylene",
pages = "209-213",
doi = "10.1007/978-94-024-2018-0_16",
url = "https://hdl.handle.net/21.15107/rcub_dais_9950"
}
Skurikhina, O., Tothova, E., Marković, S.,& Senna, M.. (2020). Modification of TiO2 and ZnO Particles Under Mechanical Stress with Polypropylene. in Nanoscience and Nanotechnology in Security and Protection against CBRN Threats
Springer Netherlands., 209-213.
https://doi.org/10.1007/978-94-024-2018-0_16
https://hdl.handle.net/21.15107/rcub_dais_9950
Skurikhina O, Tothova E, Marković S, Senna M. Modification of TiO2 and ZnO Particles Under Mechanical Stress with Polypropylene. in Nanoscience and Nanotechnology in Security and Protection against CBRN Threats. 2020;:209-213.
doi:10.1007/978-94-024-2018-0_16
https://hdl.handle.net/21.15107/rcub_dais_9950 .
Skurikhina, Olha, Tothova, Erika, Marković, Smilja, Senna, Mamoru, "Modification of TiO2 and ZnO Particles Under Mechanical Stress with Polypropylene" in Nanoscience and Nanotechnology in Security and Protection against CBRN Threats (2020):209-213,
https://doi.org/10.1007/978-94-024-2018-0_16 .,
https://hdl.handle.net/21.15107/rcub_dais_9950 .

From molecules to nanoparticles to functional materials

Ignjatović, Nenad; Marković, Smilja; Jugović, Dragana; Uskoković, Vuk; Uskoković, Dragan

(Belgrade : Serbian Chemical Society, 2020)

TY  - JOUR
AU  - Ignjatović, Nenad
AU  - Marković, Smilja
AU  - Jugović, Dragana
AU  - Uskoković, Vuk
AU  - Uskoković, Dragan
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10037
AB  - Functional nanomaterials have held a steady position at the frontier of materials science and engineering in the 21st century. “Molecular Designing of Nanoparticles with Controlled Morphological and Physicochemical Characteristics and Functional Materials Based on Them” was the title of the research project funded by the Ministry of Education, Science and Technological Development of the Republic of Serbia and performed between 2011 and 2019 in the interdisciplinary area of nanoscience and nanotechnologies. Research activities within this program were divided into five interrelated topics: 1) from molecules to nanoparticles; 2) advanced ceramics with improved functional properties; 3) electrode materials for lithium–ion batteries; 4) nano-calcium phosphate in preventive and regenerative medicine; 5) biodegradable microand nano-particles for the controlled delivery of medicaments. This report gives an insight into this bibliographically most impactful Serbian national project on nanotechnologies executed within the aforementioned nine-year cycle, 2011–2019, focusing here only on the results achieved in the past three years. The project provided an outstanding and internationally recognized contribution to synthesis, characterization and functional design of a number of materials systems, including pure and lanthanide–doped hydroxyapatite, zinc oxides, sodium cobaltates, lithium iron pyrophosphates, lithium iron silicates and a number of polymeric systems.
PB  - Belgrade : Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - From molecules to nanoparticles to functional materials
SP  - 1383
EP  - 1403
VL  - 85
IS  - 11
DO  - 10.2298/JSC200426035I
UR  - https://hdl.handle.net/21.15107/rcub_dais_10037
ER  - 
@article{
author = "Ignjatović, Nenad and Marković, Smilja and Jugović, Dragana and Uskoković, Vuk and Uskoković, Dragan",
year = "2020",
abstract = "Functional nanomaterials have held a steady position at the frontier of materials science and engineering in the 21st century. “Molecular Designing of Nanoparticles with Controlled Morphological and Physicochemical Characteristics and Functional Materials Based on Them” was the title of the research project funded by the Ministry of Education, Science and Technological Development of the Republic of Serbia and performed between 2011 and 2019 in the interdisciplinary area of nanoscience and nanotechnologies. Research activities within this program were divided into five interrelated topics: 1) from molecules to nanoparticles; 2) advanced ceramics with improved functional properties; 3) electrode materials for lithium–ion batteries; 4) nano-calcium phosphate in preventive and regenerative medicine; 5) biodegradable microand nano-particles for the controlled delivery of medicaments. This report gives an insight into this bibliographically most impactful Serbian national project on nanotechnologies executed within the aforementioned nine-year cycle, 2011–2019, focusing here only on the results achieved in the past three years. The project provided an outstanding and internationally recognized contribution to synthesis, characterization and functional design of a number of materials systems, including pure and lanthanide–doped hydroxyapatite, zinc oxides, sodium cobaltates, lithium iron pyrophosphates, lithium iron silicates and a number of polymeric systems.",
publisher = "Belgrade : Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "From molecules to nanoparticles to functional materials",
pages = "1383-1403",
volume = "85",
number = "11",
doi = "10.2298/JSC200426035I",
url = "https://hdl.handle.net/21.15107/rcub_dais_10037"
}
Ignjatović, N., Marković, S., Jugović, D., Uskoković, V.,& Uskoković, D.. (2020). From molecules to nanoparticles to functional materials. in Journal of the Serbian Chemical Society
Belgrade : Serbian Chemical Society., 85(11), 1383-1403.
https://doi.org/10.2298/JSC200426035I
https://hdl.handle.net/21.15107/rcub_dais_10037
Ignjatović N, Marković S, Jugović D, Uskoković V, Uskoković D. From molecules to nanoparticles to functional materials. in Journal of the Serbian Chemical Society. 2020;85(11):1383-1403.
doi:10.2298/JSC200426035I
https://hdl.handle.net/21.15107/rcub_dais_10037 .
Ignjatović, Nenad, Marković, Smilja, Jugović, Dragana, Uskoković, Vuk, Uskoković, Dragan, "From molecules to nanoparticles to functional materials" in Journal of the Serbian Chemical Society, 85, no. 11 (2020):1383-1403,
https://doi.org/10.2298/JSC200426035I .,
https://hdl.handle.net/21.15107/rcub_dais_10037 .

HAp:Co as tunable VIS-NIR reflective pigment

Marković, Smilja; Stojanović, Zoran; Veselinović, Ljiljana; Simić, Danica; Samolov, Aleksandra; Stojković Simatović, Ivana

(Belgrade : Military Technical Institute, 2020)

TY  - CONF
AU  - Marković, Smilja
AU  - Stojanović, Zoran
AU  - Veselinović, Ljiljana
AU  - Simić, Danica
AU  - Samolov, Aleksandra
AU  - Stojković Simatović, Ivana
PY  - 2020
UR  - http://www.vti.mod.gov.rs/oteh/elementi/rad/125.pdf
UR  - https://dais.sanu.ac.rs/123456789/10038
AB  - Radar-absorbent materials, used in stealth technology for defense aircrafts, vehicles, satellites, etc. from radar detection, are commonly based on graphite or semiconductive particles embedded in a polymer matrix. In this study, we employed Co2+ ion-substitution to improve Vis-NIR reflectivity of hydroxyapatite (Ca10(PO4)6(OH)2, HAP) powder. HAP:Co with nominally 5 at.% of Co was prepared with hydrothermal processing of a precipitate. Synthesized powder was characterized by XRD, Raman and ATR-FTIR spectroscopy, FE-SEM and TEM. Thermal stability of HAP:Co powder was examined by simultaneous TG-DTA analyzer. To modify its optical properties and obtain powders with a varietty of color tone, the HAP:Co powder was calcined at 800, 1000, and 1100 °C, in an air atmosphere, for 1 hour. Afterward, the calcined particles were used to prepare composites with poly(vinyl butyral), (PVB); the concentration range was 1 wt.% of the HAP:Co in PVB. The composite coatings, in the form of thin films on glass, were prepared by the solvent-casting technique, using ethanol as a fast evaporating solvent. Firstly, the HAP:Co particles were dispersed in ethanol, then PVB was added (Mowital B30H) and dissolved. To evaporate the solvent before spectrophotometric measurements, the coatings on glass were dried at room temperature for 72 hours. To comprehend optical properties of the coatings, diffuse reflection, transmission, and color coordinates were determined. We found that calcined HAP:Co particles have potential to be used in the formulation of coatings for camouflage protection.
PB  - Belgrade : Military Technical Institute
C3  - 9th International Scientific Conference on Defensive Technologies : OTEH2020, Belgrade, Serbia, 15-16 October 2020
T1  - HAp:Co as tunable VIS-NIR reflective pigment
SP  - 475
EP  - 480
UR  - https://hdl.handle.net/21.15107/rcub_dais_10038
ER  - 
@conference{
author = "Marković, Smilja and Stojanović, Zoran and Veselinović, Ljiljana and Simić, Danica and Samolov, Aleksandra and Stojković Simatović, Ivana",
year = "2020",
abstract = "Radar-absorbent materials, used in stealth technology for defense aircrafts, vehicles, satellites, etc. from radar detection, are commonly based on graphite or semiconductive particles embedded in a polymer matrix. In this study, we employed Co2+ ion-substitution to improve Vis-NIR reflectivity of hydroxyapatite (Ca10(PO4)6(OH)2, HAP) powder. HAP:Co with nominally 5 at.% of Co was prepared with hydrothermal processing of a precipitate. Synthesized powder was characterized by XRD, Raman and ATR-FTIR spectroscopy, FE-SEM and TEM. Thermal stability of HAP:Co powder was examined by simultaneous TG-DTA analyzer. To modify its optical properties and obtain powders with a varietty of color tone, the HAP:Co powder was calcined at 800, 1000, and 1100 °C, in an air atmosphere, for 1 hour. Afterward, the calcined particles were used to prepare composites with poly(vinyl butyral), (PVB); the concentration range was 1 wt.% of the HAP:Co in PVB. The composite coatings, in the form of thin films on glass, were prepared by the solvent-casting technique, using ethanol as a fast evaporating solvent. Firstly, the HAP:Co particles were dispersed in ethanol, then PVB was added (Mowital B30H) and dissolved. To evaporate the solvent before spectrophotometric measurements, the coatings on glass were dried at room temperature for 72 hours. To comprehend optical properties of the coatings, diffuse reflection, transmission, and color coordinates were determined. We found that calcined HAP:Co particles have potential to be used in the formulation of coatings for camouflage protection.",
publisher = "Belgrade : Military Technical Institute",
journal = "9th International Scientific Conference on Defensive Technologies : OTEH2020, Belgrade, Serbia, 15-16 October 2020",
title = "HAp:Co as tunable VIS-NIR reflective pigment",
pages = "475-480",
url = "https://hdl.handle.net/21.15107/rcub_dais_10038"
}
Marković, S., Stojanović, Z., Veselinović, L., Simić, D., Samolov, A.,& Stojković Simatović, I.. (2020). HAp:Co as tunable VIS-NIR reflective pigment. in 9th International Scientific Conference on Defensive Technologies : OTEH2020, Belgrade, Serbia, 15-16 October 2020
Belgrade : Military Technical Institute., 475-480.
https://hdl.handle.net/21.15107/rcub_dais_10038
Marković S, Stojanović Z, Veselinović L, Simić D, Samolov A, Stojković Simatović I. HAp:Co as tunable VIS-NIR reflective pigment. in 9th International Scientific Conference on Defensive Technologies : OTEH2020, Belgrade, Serbia, 15-16 October 2020. 2020;:475-480.
https://hdl.handle.net/21.15107/rcub_dais_10038 .
Marković, Smilja, Stojanović, Zoran, Veselinović, Ljiljana, Simić, Danica, Samolov, Aleksandra, Stojković Simatović, Ivana, "HAp:Co as tunable VIS-NIR reflective pigment" in 9th International Scientific Conference on Defensive Technologies : OTEH2020, Belgrade, Serbia, 15-16 October 2020 (2020):475-480,
https://hdl.handle.net/21.15107/rcub_dais_10038 .

A study of defect structures in Fe-alloyed ZnO: Morphology, magnetism, and hyperfine interactions

Ivanovski, Valentin N.; Belošević-Čavor, Jelena; Rajić, Vladimir; Umićević, Ana; Marković, Smilja; Kusigerski, Vladan; Mitrić, Miodrag; Koteski, Vasil

(AIP Publishing, 2019)

TY  - JOUR
AU  - Ivanovski, Valentin N.
AU  - Belošević-Čavor, Jelena
AU  - Rajić, Vladimir
AU  - Umićević, Ana
AU  - Marković, Smilja
AU  - Kusigerski, Vladan
AU  - Mitrić, Miodrag
AU  - Koteski, Vasil
PY  - 2019
UR  - https://aip.scitation.org/doi/10.1063/1.5095837
UR  - http://dais.sanu.ac.rs/123456789/6883
AB  - In order to study the effect of Fe cation substitution on the local structure, defect formation, and hyperfine interactions in ZnO, Mössbauer spectroscopy measurements of the microwave processed Zn1−xFexO (x=0.05, 0.10, 0.15, and 0.20) nanoparticles, together with ab initio calculations, were performed. Complementary information on the distribution of particle size and morphology, as well as magnetic properties, were obtained by X-ray diffraction, transmission electron microscopy, and squid-magnetometry. The selected model for analyzing the Mössbauer spectra of our samples is a distribution of quadrupole splittings. The fitting model with two Lorentz doublets was rejected due to its failure to include larger doublets. The Fe3+ ions do not yield magnetic ordering in the samples at room temperature. The results from first-principles calculations confirm that the major component of the Mössbauer spectra corresponds to the Fe-alloyed ZnO with Zn vacancy in the next nearest neighbor environment. The magnetic measurements are consistent with the description of the distribution of iron ions over the randomly formed clusters in the ZnO host lattice. While at room temperature all the samples are paramagnetic, magnetic interactions cause a transition into a cluster spin-glass state at low temperatures.
PB  - AIP Publishing
T2  - Journal of Applied Physics
T1  - A study of defect structures in Fe-alloyed ZnO: Morphology, magnetism, and hyperfine interactions
SP  - 125703
VL  - 126
IS  - 12
DO  - 10.1063/1.5095837
UR  - https://hdl.handle.net/21.15107/rcub_dais_6883
ER  - 
@article{
author = "Ivanovski, Valentin N. and Belošević-Čavor, Jelena and Rajić, Vladimir and Umićević, Ana and Marković, Smilja and Kusigerski, Vladan and Mitrić, Miodrag and Koteski, Vasil",
year = "2019",
abstract = "In order to study the effect of Fe cation substitution on the local structure, defect formation, and hyperfine interactions in ZnO, Mössbauer spectroscopy measurements of the microwave processed Zn1−xFexO (x=0.05, 0.10, 0.15, and 0.20) nanoparticles, together with ab initio calculations, were performed. Complementary information on the distribution of particle size and morphology, as well as magnetic properties, were obtained by X-ray diffraction, transmission electron microscopy, and squid-magnetometry. The selected model for analyzing the Mössbauer spectra of our samples is a distribution of quadrupole splittings. The fitting model with two Lorentz doublets was rejected due to its failure to include larger doublets. The Fe3+ ions do not yield magnetic ordering in the samples at room temperature. The results from first-principles calculations confirm that the major component of the Mössbauer spectra corresponds to the Fe-alloyed ZnO with Zn vacancy in the next nearest neighbor environment. The magnetic measurements are consistent with the description of the distribution of iron ions over the randomly formed clusters in the ZnO host lattice. While at room temperature all the samples are paramagnetic, magnetic interactions cause a transition into a cluster spin-glass state at low temperatures.",
publisher = "AIP Publishing",
journal = "Journal of Applied Physics",
title = "A study of defect structures in Fe-alloyed ZnO: Morphology, magnetism, and hyperfine interactions",
pages = "125703",
volume = "126",
number = "12",
doi = "10.1063/1.5095837",
url = "https://hdl.handle.net/21.15107/rcub_dais_6883"
}
Ivanovski, V. N., Belošević-Čavor, J., Rajić, V., Umićević, A., Marković, S., Kusigerski, V., Mitrić, M.,& Koteski, V.. (2019). A study of defect structures in Fe-alloyed ZnO: Morphology, magnetism, and hyperfine interactions. in Journal of Applied Physics
AIP Publishing., 126(12), 125703.
https://doi.org/10.1063/1.5095837
https://hdl.handle.net/21.15107/rcub_dais_6883
Ivanovski VN, Belošević-Čavor J, Rajić V, Umićević A, Marković S, Kusigerski V, Mitrić M, Koteski V. A study of defect structures in Fe-alloyed ZnO: Morphology, magnetism, and hyperfine interactions. in Journal of Applied Physics. 2019;126(12):125703.
doi:10.1063/1.5095837
https://hdl.handle.net/21.15107/rcub_dais_6883 .
Ivanovski, Valentin N., Belošević-Čavor, Jelena, Rajić, Vladimir, Umićević, Ana, Marković, Smilja, Kusigerski, Vladan, Mitrić, Miodrag, Koteski, Vasil, "A study of defect structures in Fe-alloyed ZnO: Morphology, magnetism, and hyperfine interactions" in Journal of Applied Physics, 126, no. 12 (2019):125703,
https://doi.org/10.1063/1.5095837 .,
https://hdl.handle.net/21.15107/rcub_dais_6883 .
4
5
4

Kinetics of thermally activated processes in cordierite-based ceramics

Obradović, Nina; Blagojević, Vladimir A.; Filipović, Suzana; Đorđević, Antonije; Kosanović, Darko; Marković, Smilja; Kachlik, Martin; Maca, Karel; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Blagojević, Vladimir A.
AU  - Filipović, Suzana
AU  - Đorđević, Antonije
AU  - Kosanović, Darko
AU  - Marković, Smilja
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/7048
AB  - Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Kinetics of thermally activated processes in cordierite-based ceramics
SP  - 2989
EP  - 2998
VL  - 138
DO  - 10.1007/s10973-018-7924-1
UR  - https://hdl.handle.net/21.15107/rcub_dais_7048
ER  - 
@article{
author = "Obradović, Nina and Blagojević, Vladimir A. and Filipović, Suzana and Đorđević, Antonije and Kosanović, Darko and Marković, Smilja and Kachlik, Martin and Maca, Karel and Pavlović, Vladimir B.",
year = "2019",
abstract = "Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Kinetics of thermally activated processes in cordierite-based ceramics",
pages = "2989-2998",
volume = "138",
doi = "10.1007/s10973-018-7924-1",
url = "https://hdl.handle.net/21.15107/rcub_dais_7048"
}
Obradović, N., Blagojević, V. A., Filipović, S., Đorđević, A., Kosanović, D., Marković, S., Kachlik, M., Maca, K.,& Pavlović, V. B.. (2019). Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry
Springer., 138, 2989-2998.
https://doi.org/10.1007/s10973-018-7924-1
https://hdl.handle.net/21.15107/rcub_dais_7048
Obradović N, Blagojević VA, Filipović S, Đorđević A, Kosanović D, Marković S, Kachlik M, Maca K, Pavlović VB. Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry. 2019;138:2989-2998.
doi:10.1007/s10973-018-7924-1
https://hdl.handle.net/21.15107/rcub_dais_7048 .
Obradović, Nina, Blagojević, Vladimir A., Filipović, Suzana, Đorđević, Antonije, Kosanović, Darko, Marković, Smilja, Kachlik, Martin, Maca, Karel, Pavlović, Vladimir B., "Kinetics of thermally activated processes in cordierite-based ceramics" in Journal of Thermal Analysis and Calorimetry, 138 (2019):2989-2998,
https://doi.org/10.1007/s10973-018-7924-1 .,
https://hdl.handle.net/21.15107/rcub_dais_7048 .
2
1
1

Kinetics of thermally activated processes in cordierite-based ceramics

Obradović, Nina; Blagojević, Vladimir A.; Filipović, Suzana; Đorđević, Antonije; Kosanović, Darko; Marković, Smilja; Kachlik, Martin; Maca, Karel; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Blagojević, Vladimir A.
AU  - Filipović, Suzana
AU  - Đorđević, Antonije
AU  - Kosanović, Darko
AU  - Marković, Smilja
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/4558
AB  - Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Kinetics of thermally activated processes in cordierite-based ceramics
SP  - 2989
EP  - 2998
VL  - 138
DO  - 10.1007/s10973-018-7924-1
UR  - https://hdl.handle.net/21.15107/rcub_dais_4558
ER  - 
@article{
author = "Obradović, Nina and Blagojević, Vladimir A. and Filipović, Suzana and Đorđević, Antonije and Kosanović, Darko and Marković, Smilja and Kachlik, Martin and Maca, Karel and Pavlović, Vladimir B.",
year = "2019",
abstract = "Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Kinetics of thermally activated processes in cordierite-based ceramics",
pages = "2989-2998",
volume = "138",
doi = "10.1007/s10973-018-7924-1",
url = "https://hdl.handle.net/21.15107/rcub_dais_4558"
}
Obradović, N., Blagojević, V. A., Filipović, S., Đorđević, A., Kosanović, D., Marković, S., Kachlik, M., Maca, K.,& Pavlović, V. B.. (2019). Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry
Springer., 138, 2989-2998.
https://doi.org/10.1007/s10973-018-7924-1
https://hdl.handle.net/21.15107/rcub_dais_4558
Obradović N, Blagojević VA, Filipović S, Đorđević A, Kosanović D, Marković S, Kachlik M, Maca K, Pavlović VB. Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry. 2019;138:2989-2998.
doi:10.1007/s10973-018-7924-1
https://hdl.handle.net/21.15107/rcub_dais_4558 .
Obradović, Nina, Blagojević, Vladimir A., Filipović, Suzana, Đorđević, Antonije, Kosanović, Darko, Marković, Smilja, Kachlik, Martin, Maca, Karel, Pavlović, Vladimir B., "Kinetics of thermally activated processes in cordierite-based ceramics" in Journal of Thermal Analysis and Calorimetry, 138 (2019):2989-2998,
https://doi.org/10.1007/s10973-018-7924-1 .,
https://hdl.handle.net/21.15107/rcub_dais_4558 .
2
1
1

Calcium phosphate nanoparticles as intrinsic inorganic antimicrobials: In search of the key particle property

Uskoković, Vuk; Tang, Sean; Nikolić, Marko G.; Marković, Smilja; Wu, Victoria M.

(AIP Publishing LLC, 2019)

TY  - JOUR
AU  - Uskoković, Vuk
AU  - Tang, Sean
AU  - Nikolić, Marko G.
AU  - Marković, Smilja
AU  - Wu, Victoria M.
PY  - 2019
UR  - https://avs.scitation.org/doi/abs/10.1116/1.5090396
UR  - http://dais.sanu.ac.rs/123456789/6469
AB  - One of the main goals of materials science in the 21st century is the development of materials with rationally designed properties as substitutes for traditional pharmacotherapies. At the same time, there is a lack of understanding of the exact material properties that induce therapeutic effects in biological systems, which limits their rational optimization for the related medical applications. This study sets the foundation for a general approach for elucidating nanoparticle properties as determinants of antibacterial activity, with a particular focus on calcium phosphate nanoparticles. To that end, nine physicochemical effects were studied and a number of them were refuted, thus putting an end to frequently erred hypotheses in the literature. Rather than having one key particle property responsible for eliciting the antibacterial effect, a complex synergy of factors is shown to be at work, including (a) nanoscopic size; (b) elevated intracellular free calcium levels due to nanoparticle solubility; (c) diffusivity and favorable electrostatic properties of the nanoparticle surface, primarily low net charge and high charge density; and (d) the dynamics of perpetual exchange of ultrafine clusters across the particle/solution interface. On the positive side, this multifaceted mechanism is less prone to induce bacterial resistance to the therapy and can be a gateway to the sphere of personalized medicine. On a more problematic side, it implies a less intense effect compared to single-target molecular therapies and a difficulty of elucidating the exact mechanisms of action, while also making the rational design of theirs for this type of medical application a challenge.
PB  - AIP Publishing LLC
T2  - Biointerphases
T1  - Calcium phosphate nanoparticles as intrinsic inorganic antimicrobials: In search of the key particle property
SP  - 031001
VL  - 14
IS  - 3
DO  - 10.1116/1.5090396
UR  - https://hdl.handle.net/21.15107/rcub_dais_6469
ER  - 
@article{
author = "Uskoković, Vuk and Tang, Sean and Nikolić, Marko G. and Marković, Smilja and Wu, Victoria M.",
year = "2019",
abstract = "One of the main goals of materials science in the 21st century is the development of materials with rationally designed properties as substitutes for traditional pharmacotherapies. At the same time, there is a lack of understanding of the exact material properties that induce therapeutic effects in biological systems, which limits their rational optimization for the related medical applications. This study sets the foundation for a general approach for elucidating nanoparticle properties as determinants of antibacterial activity, with a particular focus on calcium phosphate nanoparticles. To that end, nine physicochemical effects were studied and a number of them were refuted, thus putting an end to frequently erred hypotheses in the literature. Rather than having one key particle property responsible for eliciting the antibacterial effect, a complex synergy of factors is shown to be at work, including (a) nanoscopic size; (b) elevated intracellular free calcium levels due to nanoparticle solubility; (c) diffusivity and favorable electrostatic properties of the nanoparticle surface, primarily low net charge and high charge density; and (d) the dynamics of perpetual exchange of ultrafine clusters across the particle/solution interface. On the positive side, this multifaceted mechanism is less prone to induce bacterial resistance to the therapy and can be a gateway to the sphere of personalized medicine. On a more problematic side, it implies a less intense effect compared to single-target molecular therapies and a difficulty of elucidating the exact mechanisms of action, while also making the rational design of theirs for this type of medical application a challenge.",
publisher = "AIP Publishing LLC",
journal = "Biointerphases",
title = "Calcium phosphate nanoparticles as intrinsic inorganic antimicrobials: In search of the key particle property",
pages = "031001",
volume = "14",
number = "3",
doi = "10.1116/1.5090396",
url = "https://hdl.handle.net/21.15107/rcub_dais_6469"
}
Uskoković, V., Tang, S., Nikolić, M. G., Marković, S.,& Wu, V. M.. (2019). Calcium phosphate nanoparticles as intrinsic inorganic antimicrobials: In search of the key particle property. in Biointerphases
AIP Publishing LLC., 14(3), 031001.
https://doi.org/10.1116/1.5090396
https://hdl.handle.net/21.15107/rcub_dais_6469
Uskoković V, Tang S, Nikolić MG, Marković S, Wu VM. Calcium phosphate nanoparticles as intrinsic inorganic antimicrobials: In search of the key particle property. in Biointerphases. 2019;14(3):031001.
doi:10.1116/1.5090396
https://hdl.handle.net/21.15107/rcub_dais_6469 .
Uskoković, Vuk, Tang, Sean, Nikolić, Marko G., Marković, Smilja, Wu, Victoria M., "Calcium phosphate nanoparticles as intrinsic inorganic antimicrobials: In search of the key particle property" in Biointerphases, 14, no. 3 (2019):031001,
https://doi.org/10.1116/1.5090396 .,
https://hdl.handle.net/21.15107/rcub_dais_6469 .
3
16
14
17