TY  - CONF
AU  - Orelj, Jelena
AU  - Mitrović, Nebojša S.
AU  - Pavlović, Vladimir B.
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12093
AB  - This study presents magnetoimpedance (MI) effect of Co-based amorphous wire investigated at driving frequency range f  [50 Hz – 5 MHz]. The XRD pattern and EDX analysis confirmed amorphous structure and the main element content of CoFeSiB alloy. The critical frequency of about 7 kHz was observed as the point with the initial increase of magnetoimpedance. A maximum MI-ratio [Z(0) - Z(Hmax)] / Z(Hmax) of 334 % is attained at driving frequency of 900 kHz@ Hmax  4.63 kA/m.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and the Book of abstracts / Twenty-second Annual Conference YUCOMAT 2021 Herceg Novi, Montenegro, August 30 - September 3, 2021
T1  - Frequency behaviour of Co-based amorphous wire MI-element
SP  - 98
EP  - 98
UR  - https://hdl.handle.net/21.15107/rcub_dais_12093
ER  - 

@conference{
author = "Orelj, Jelena and Mitrović, Nebojša S. and Pavlović, Vladimir B.",
year = "2021",
abstract = "This study presents magnetoimpedance (MI) effect of Co-based amorphous wire investigated at driving frequency range f  [50 Hz – 5 MHz]. The XRD pattern and EDX analysis confirmed amorphous structure and the main element content of CoFeSiB alloy. The critical frequency of about 7 kHz was observed as the point with the initial increase of magnetoimpedance. A maximum MI-ratio [Z(0) - Z(Hmax)] / Z(Hmax) of 334 % is attained at driving frequency of 900 kHz@ Hmax  4.63 kA/m.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and the Book of abstracts / Twenty-second Annual Conference YUCOMAT 2021 Herceg Novi, Montenegro, August 30 - September 3, 2021",
title = "Frequency behaviour of Co-based amorphous wire MI-element",
pages = "98-98",
url = "https://hdl.handle.net/21.15107/rcub_dais_12093"
}

Orelj, J., Mitrović, N. S.,& Pavlović, V. B.. (2021). Frequency behaviour of Co-based amorphous wire MI-element. in Programme and the Book of abstracts / Twenty-second Annual Conference YUCOMAT 2021 Herceg Novi, Montenegro, August 30 - September 3, 2021
Belgrade : Materials Research Society of Serbia., 98-98.
https://hdl.handle.net/21.15107/rcub_dais_12093

Orelj J, Mitrović NS, Pavlović VB. Frequency behaviour of Co-based amorphous wire MI-element. in Programme and the Book of abstracts / Twenty-second Annual Conference YUCOMAT 2021 Herceg Novi, Montenegro, August 30 - September 3, 2021. 2021;:98-98.
https://hdl.handle.net/21.15107/rcub_dais_12093 .

Orelj, Jelena, Mitrović, Nebojša S., Pavlović, Vladimir B., "Frequency behaviour of Co-based amorphous wire MI-element" in Programme and the Book of abstracts / Twenty-second Annual Conference YUCOMAT 2021 Herceg Novi, Montenegro, August 30 - September 3, 2021 (2021):98-98,
https://hdl.handle.net/21.15107/rcub_dais_12093 .

TY  - JOUR
AU  - Nedeljković, Borivoje
AU  - Mitrović, Nebojša
AU  - Orelj, Jelena
AU  - Obradović, Nina
AU  - Pavlović, Vladimir B.
PY  - 2017
UR  - https://dais.sanu.ac.rs/123456789/2342
AB  - In this study the characterization of FeCo-2V alloys toroidal samples produced by PIM/MIM technology was presented. The feedstock for metal injection molding (MIM) was prepared by mixing starting FeCoV powder with a low viscosity binder. Green samples were subjected to solvent debinding and subsequent thermal debinding followed by sintering. Sintering was performed during 3.5 hours from 1370°C to 1460°C in hydrogen atmosphere in order to attain the appropriate mechanical and magnetic properties. Microstructure, hardness HV10 and magnetic hysteresis B(H) were investigated as a function of sintering temperature. Optimum combination of functional properties was observed after sintering at temperature of 1370°C. In addition, magnetic properties were analyzed as frequency dependent and successfully simulated in operating frequency range from 5 Hz to 60 Hz.
PB  - Belgrade : International Institute for the Science of Sintering
T2  - Science of Sintering
T1  - Characterization of FeCoV alloy processed by PIM/MIM route
SP  - 299
EP  - 309
VL  - 49
IS  - 3
DO  - 10.2298/SOS1703299N
UR  - https://hdl.handle.net/21.15107/rcub_dais_2342
ER  - 

@article{
author = "Nedeljković, Borivoje and Mitrović, Nebojša and Orelj, Jelena and Obradović, Nina and Pavlović, Vladimir B.",
year = "2017",
abstract = "In this study the characterization of FeCo-2V alloys toroidal samples produced by PIM/MIM technology was presented. The feedstock for metal injection molding (MIM) was prepared by mixing starting FeCoV powder with a low viscosity binder. Green samples were subjected to solvent debinding and subsequent thermal debinding followed by sintering. Sintering was performed during 3.5 hours from 1370°C to 1460°C in hydrogen atmosphere in order to attain the appropriate mechanical and magnetic properties. Microstructure, hardness HV10 and magnetic hysteresis B(H) were investigated as a function of sintering temperature. Optimum combination of functional properties was observed after sintering at temperature of 1370°C. In addition, magnetic properties were analyzed as frequency dependent and successfully simulated in operating frequency range from 5 Hz to 60 Hz.",
publisher = "Belgrade : International Institute for the Science of Sintering",
journal = "Science of Sintering",
title = "Characterization of FeCoV alloy processed by PIM/MIM route",
pages = "299-309",
volume = "49",
number = "3",
doi = "10.2298/SOS1703299N",
url = "https://hdl.handle.net/21.15107/rcub_dais_2342"
}

Nedeljković, B., Mitrović, N., Orelj, J., Obradović, N.,& Pavlović, V. B.. (2017). Characterization of FeCoV alloy processed by PIM/MIM route. in Science of Sintering
Belgrade : International Institute for the Science of Sintering., 49(3), 299-309.
https://doi.org/10.2298/SOS1703299N
https://hdl.handle.net/21.15107/rcub_dais_2342

Nedeljković B, Mitrović N, Orelj J, Obradović N, Pavlović VB. Characterization of FeCoV alloy processed by PIM/MIM route. in Science of Sintering. 2017;49(3):299-309.
doi:10.2298/SOS1703299N
https://hdl.handle.net/21.15107/rcub_dais_2342 .

Nedeljković, Borivoje, Mitrović, Nebojša, Orelj, Jelena, Obradović, Nina, Pavlović, Vladimir B., "Characterization of FeCoV alloy processed by PIM/MIM route" in Science of Sintering, 49, no. 3 (2017):299-309,
https://doi.org/10.2298/SOS1703299N .,
https://hdl.handle.net/21.15107/rcub_dais_2342 .