Pavlović, Vera P.

Link to this page

Authority KeyName Variants
orcid::0000-0002-1802-1796
  • Pavlović, Vera P. (64)
  • Pavlović, Vera (1)
Projects
Directed synthesis, structure and properties of multifunctional materials United States National Aeronautics and Space Administration (NASA), Grant NNX09AV07A
United States National Science Foundation (NSF) / Centers of Research Excellence in Science and Technology (CREST), Grant HRD-0833184 United States National Science Foundation (NSF) / Partnerships for Research and Education in Materials (PREM), Grant 1523617
Zero- to Three-Dimensional Nanostructures for Application in Electronics and Renewable Energy Sources: Synthesis, Characterization and Processing Size-, shape- and structure- dependent properties of nanoparticles and nanocomposites
Synthesis, processing and applications of nanostructured multifunctional materials with defined properties Serbian Academy of Sciences and Arts, Project F-198
Lithium-ion batteries and fuel cells - research and development Materials of Reduced Dimensions for Efficient Light Harvesting and Energy conversion
National Science Foundation, North Carolina State University, Project No. HRD-1345219 Bilateral cooperation between Serbia and France, No. 4510339/2016/09/03 “Inteligent econanomaterials and nanocomposites”
ERC advanced grant “PICOPROP” (Grant No. 670918) Investigation of intermetallics and semiconductors and possible application in renewable energy sources
Investigation of the effect of parameters of synthesis and processing on dielectric, optical and magnetic properties, both bulk and surface of crystal and polymeric systems Geologic and ecotoxicologic research in identification of geopathogen zones of toxic elements in drinking water reservoirs- research into methods and procedures for reduction of biochemical anomalies
Serbian Academy of Sciences and Arts, Project F-178 Swiss National Science Foundation (No. 160169)
Czech Science Foundation (GACR) - 17-05620S Synthesis, processing and characterization of nanostructured materials for application in the field of energy, mechanical engineering, environmental protection and biomedicine
Investigation of the relation in triad: Synthesis structure-properties for functional materials Ministry of Education, Youth and Sports (MEYS) of Czech Republic - CEITEC 2020 [LQ1601]
National Research Foundation in South Africa

Author's Bibliography

PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix

Pavlović, Vera P.; Tošić, Dragana; Dojčilović, Radovan; Dudić, Duško; Dramićanin, Miroslav D.; Medić, Mina; McPherson, Michael M.; Pavlović, Vladimir B.; Vlahović, Branislav; Đoković, Vladimir

(Elsevier BV, 2021)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Tošić, Dragana
AU  - Dojčilović, Radovan
AU  - Dudić, Duško
AU  - Dramićanin, Miroslav D.
AU  - Medić, Mina
AU  - McPherson, Michael M.
AU  - Pavlović, Vladimir B.
AU  - Vlahović, Branislav
AU  - Đoković, Vladimir
PY  - 2021
AB  - Na0.25K0.25Bi0.5TiO3 (NKBT) perovskite particles are synthesized by solid-state method and used as a filler for polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) co-polymer. X-ray diffraction analysis of NKBT powders shows that the particles have a rhombohedral perovskite crystal structure (R3c symmetry). Raman spectroscopy reveals that the co-polymer crystallizes predominantly into the mixture of polar β- and γ-crystals, while there is also a contribution of the non-polar α-crystal phase. The introduction of the NKBT into the PVDF-HFP results with an increase in effective dielectric permittivity and this effect depends on the inorganic content in the composite. The most interesting result of the present study is that the introduction of NKBT particles induces the appearance of an additional transition peak in the dielectric spectra of the co-polymer matrix. At the fixed frequency of ~2 kHz, the observed process appears at ~10 °C (about 45° above the glass transition temperature) and its magnitude strongly depends on the amount of the NKBT in the composite. Dielectric spectroscopy measurements of the composites are carried out in the wide range of frequencies (from 0.1 Hz to 1 MHz) and temperatures (from −100 to 100 °C). They reveal that the novel process can be clearly distinguished in the frequency range between 160 Hz and ~50 kHz.
PB  - Elsevier BV
T2  - Polymer Testing
T1  - PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix
SP  - 107093
VL  - 96
DO  - 10.1016/j.polymertesting.2021.107093
ER  - 
@article{
author = "Pavlović, Vera P. and Tošić, Dragana and Dojčilović, Radovan and Dudić, Duško and Dramićanin, Miroslav D. and Medić, Mina and McPherson, Michael M. and Pavlović, Vladimir B. and Vlahović, Branislav and Đoković, Vladimir",
year = "2021",
abstract = "Na0.25K0.25Bi0.5TiO3 (NKBT) perovskite particles are synthesized by solid-state method and used as a filler for polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) co-polymer. X-ray diffraction analysis of NKBT powders shows that the particles have a rhombohedral perovskite crystal structure (R3c symmetry). Raman spectroscopy reveals that the co-polymer crystallizes predominantly into the mixture of polar β- and γ-crystals, while there is also a contribution of the non-polar α-crystal phase. The introduction of the NKBT into the PVDF-HFP results with an increase in effective dielectric permittivity and this effect depends on the inorganic content in the composite. The most interesting result of the present study is that the introduction of NKBT particles induces the appearance of an additional transition peak in the dielectric spectra of the co-polymer matrix. At the fixed frequency of ~2 kHz, the observed process appears at ~10 °C (about 45° above the glass transition temperature) and its magnitude strongly depends on the amount of the NKBT in the composite. Dielectric spectroscopy measurements of the composites are carried out in the wide range of frequencies (from 0.1 Hz to 1 MHz) and temperatures (from −100 to 100 °C). They reveal that the novel process can be clearly distinguished in the frequency range between 160 Hz and ~50 kHz.",
publisher = "Elsevier BV",
journal = "Polymer Testing",
title = "PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix",
pages = "107093",
volume = "96",
doi = "10.1016/j.polymertesting.2021.107093"
}
Pavlović, V. P., Tošić, D., Dojčilović, R., Dudić, D., Dramićanin, M. D., Medić, M., McPherson, M. M., Pavlović, V. B., Vlahović, B.,& Đoković, V. (2021). PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix.
Polymer Testing
Elsevier BV., 96, 107093.
https://doi.org/10.1016/j.polymertesting.2021.107093
Pavlović VP, Tošić D, Dojčilović R, Dudić D, Dramićanin MD, Medić M, McPherson MM, Pavlović VB, Vlahović B, Đoković V. PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix. Polymer Testing. 2021;96:107093.
doi:10.1016/j.polymertesting.2021.107093.
Pavlović Vera P., Tošić Dragana, Dojčilović Radovan, Dudić Duško, Dramićanin Miroslav D., Medić Mina, McPherson Michael M., Pavlović Vladimir B., Vlahović Branislav, Đoković Vladimir, "PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix" Polymer Testing, 96 (2021):107093,
https://doi.org/10.1016/j.polymertesting.2021.107093 .
1
1

Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal

Rusmirović, Jelena; Obradović, Nina; Perendija, Jovana; Umićević, Ana; Kapidžić, Ana; Vlahović, Branislav; Pavlović, Vera P.; Marinković, Aleksandar D.; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Rusmirović, Jelena
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera P.
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.
PB  - Springer
T2  - Environmental Science and Pollution Research
T1  - Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
SP  - 12379
EP  - 12398
VL  - 26
IS  - 12
DO  - 10.1007/s11356-019-04625-0
ER  - 
@article{
author = "Rusmirović, Jelena and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera P. and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
abstract = "Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.",
publisher = "Springer",
journal = "Environmental Science and Pollution Research",
title = "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal",
pages = "12379-12398",
volume = "26",
number = "12",
doi = "10.1007/s11356-019-04625-0"
}
Rusmirović, J., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V. P., Marinković, A. D.,& Pavlović, V. B. (2019). Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal.
Environmental Science and Pollution Research
Springer., 26(12), 12379-12398.
https://doi.org/10.1007/s11356-019-04625-0
Rusmirović J, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović VP, Marinković AD, Pavlović VB. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environmental Science and Pollution Research. 2019;26(12):12379-12398.
doi:10.1007/s11356-019-04625-0.
Rusmirović Jelena, Obradović Nina, Perendija Jovana, Umićević Ana, Kapidžić Ana, Vlahović Branislav, Pavlović Vera P., Marinković Aleksandar D., Pavlović Vladimir B., "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal" Environmental Science and Pollution Research, 26, no. 12 (2019):12379-12398,
https://doi.org/10.1007/s11356-019-04625-0 .
1
4
6
6

Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing

Nikolić, Maria Vesna; Vasiljević, Zorka Ž.; Luković, Miloljub D.; Pavlović, Vera P.; Krstić, Jugoslav B.; Vujančević, Jelena; Tadić, Nenad B.; Vlahović, Branislav; Pavlović, Vladimir B.

(John Wiley & Sons, Inc., 2019)

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Vasiljević, Zorka Ž.
AU  - Luković, Miloljub D.
AU  - Pavlović, Vera P.
AU  - Krstić, Jugoslav B.
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.
PB  - John Wiley & Sons, Inc.
T2  - International Journal of Applied Ceramic Technology
T1  - Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing
SP  - 981
EP  - 993
VL  - 16
IS  - 3
DO  - 10.1111/ijac.13190
ER  - 
@article{
author = "Nikolić, Maria Vesna and Vasiljević, Zorka Ž. and Luković, Miloljub D. and Pavlović, Vera P. and Krstić, Jugoslav B. and Vujančević, Jelena and Tadić, Nenad B. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.",
publisher = "John Wiley & Sons, Inc.",
journal = "International Journal of Applied Ceramic Technology",
title = "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing",
pages = "981-993",
volume = "16",
number = "3",
doi = "10.1111/ijac.13190"
}
Nikolić, M. V., Vasiljević, Z. Ž., Luković, M. D., Pavlović, V. P., Krstić, J. B., Vujančević, J., Tadić, N. B., Vlahović, B.,& Pavlović, V. B. (2019). Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing.
International Journal of Applied Ceramic Technology
John Wiley & Sons, Inc.., 16(3), 981-993.
https://doi.org/10.1111/ijac.13190
Nikolić MV, Vasiljević ZŽ, Luković MD, Pavlović VP, Krstić JB, Vujančević J, Tadić NB, Vlahović B, Pavlović VB. Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing. International Journal of Applied Ceramic Technology. 2019;16(3):981-993.
doi:10.1111/ijac.13190.
Nikolić Maria Vesna, Vasiljević Zorka Ž., Luković Miloljub D., Pavlović Vera P., Krstić Jugoslav B., Vujančević Jelena, Tadić Nenad B., Vlahović Branislav, Pavlović Vladimir B., "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing" International Journal of Applied Ceramic Technology, 16, no. 3 (2019):981-993,
https://doi.org/10.1111/ijac.13190 .
13
9
12

Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0

Rusmirović, Jelena; Obradović, Nina; Perendija, Jovana; Umićević, Ana; Kapidžić, Ana; Vlahović, Branislav; Pavlović, Vera P.; Marinković, Aleksandar D.; Pavlović, Vladimir B.

(Springer, 2019)

TY  - BOOK
AU  - Rusmirović, Jelena
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera P.
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
PB  - Springer
T2  - Environmental Science and Pollution Research
T1  - Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0
ER  - 
@book{
author = "Rusmirović, Jelena and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera P. and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
publisher = "Springer",
journal = "Environmental Science and Pollution Research",
title = "Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0"
}
Rusmirović, J., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V. P., Marinković, A. D.,& Pavlović, V. B. (2019). Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0.
Environmental Science and Pollution Research
Springer..
Rusmirović J, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović VP, Marinković AD, Pavlović VB. Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0. Environmental Science and Pollution Research. 2019;.
Rusmirović Jelena, Obradović Nina, Perendija Jovana, Umićević Ana, Kapidžić Ana, Vlahović Branislav, Pavlović Vera P., Marinković Aleksandar D., Pavlović Vladimir B., "Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0" Environmental Science and Pollution Research (2019)

Structure and enhanced antimicrobial activity of mechanically activated nano TiO2

Pavlović, Vera P.; Vujančević, Jelena; Mašković, Pavle; Ćirković, Jovana; Papan, Jelena M.; Kosanović, Darko; Dramićanin, Miroslav; Petrović, Predrag B.; Vlahović, Branislav; Pavlović, Vladimir B.

(Wiley, 2019)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Vujančević, Jelena
AU  - Mašković, Pavle
AU  - Ćirković, Jovana
AU  - Papan, Jelena M.
AU  - Kosanović, Darko
AU  - Dramićanin, Miroslav
AU  - Petrović, Predrag B.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO2 (up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO2 and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X-ray diffraction and nitrogen adsorption-desorption measurements. UV-Vis diffuse reflectance spectra were recorded and the Kubelka-Munk function was applied to convert reflectance into the equivalent band gap energy (Eg) and, consequently, to investigate changes in the Eg value. X-ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO2-based materials with antimicrobial properties that could be used in numerous green technology applications.
PB  - Wiley
T2  - Journal of the American Ceramic Society
T1  - Structure and enhanced antimicrobial activity of mechanically activated nano TiO2
SP  - 7735
EP  - 7745
VL  - 102
IS  - 12
DO  - 10.1111/jace.16668
ER  - 
@article{
author = "Pavlović, Vera P. and Vujančević, Jelena and Mašković, Pavle and Ćirković, Jovana and Papan, Jelena M. and Kosanović, Darko and Dramićanin, Miroslav and Petrović, Predrag B. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO2 (up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO2 and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X-ray diffraction and nitrogen adsorption-desorption measurements. UV-Vis diffuse reflectance spectra were recorded and the Kubelka-Munk function was applied to convert reflectance into the equivalent band gap energy (Eg) and, consequently, to investigate changes in the Eg value. X-ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO2-based materials with antimicrobial properties that could be used in numerous green technology applications.",
publisher = "Wiley",
journal = "Journal of the American Ceramic Society",
title = "Structure and enhanced antimicrobial activity of mechanically activated nano TiO2",
pages = "7735-7745",
volume = "102",
number = "12",
doi = "10.1111/jace.16668"
}
Pavlović, V. P., Vujančević, J., Mašković, P., Ćirković, J., Papan, J. M., Kosanović, D., Dramićanin, M., Petrović, P. B., Vlahović, B.,& Pavlović, V. B. (2019). Structure and enhanced antimicrobial activity of mechanically activated nano TiO2.
Journal of the American Ceramic Society
Wiley., 102(12), 7735-7745.
https://doi.org/10.1111/jace.16668
Pavlović VP, Vujančević J, Mašković P, Ćirković J, Papan JM, Kosanović D, Dramićanin M, Petrović PB, Vlahović B, Pavlović VB. Structure and enhanced antimicrobial activity of mechanically activated nano TiO2. Journal of the American Ceramic Society. 2019;102(12):7735-7745.
doi:10.1111/jace.16668.
Pavlović Vera P., Vujančević Jelena, Mašković Pavle, Ćirković Jovana, Papan Jelena M., Kosanović Darko, Dramićanin Miroslav, Petrović Predrag B., Vlahović Branislav, Pavlović Vladimir B., "Structure and enhanced antimicrobial activity of mechanically activated nano TiO2" Journal of the American Ceramic Society, 102, no. 12 (2019):7735-7745,
https://doi.org/10.1111/jace.16668 .
7
2
2

Structure and enhanced antimicrobial activity of mechanically activated nano TiO2

Pavlović, Vera P.; Vujančević, Jelena; Mašković, Pavle; Ćirković, Jovana; Papan, Jelena M.; Kosanović, Darko; Dramićanin, Miroslav; Petrović, Predrag B.; Vlahović, Branislav; Pavlović, Vladimir B.

(Wiley, 2019)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Vujančević, Jelena
AU  - Mašković, Pavle
AU  - Ćirković, Jovana
AU  - Papan, Jelena M.
AU  - Kosanović, Darko
AU  - Dramićanin, Miroslav
AU  - Petrović, Predrag B.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO2 (up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO2 and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X-ray diffraction and nitrogen adsorption-desorption measurements. UV-Vis diffuse reflectance spectra were recorded and the Kubelka-Munk function was applied to convert reflectance into the equivalent band gap energy (Eg) and, consequently, to investigate changes in the Eg value. X-ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO2-based materials with antimicrobial properties that could be used in numerous green technology applications.
PB  - Wiley
T2  - Journal of the American Ceramic Society
T1  - Structure and enhanced antimicrobial activity of mechanically activated nano TiO2
SP  - 7735
EP  - 7745
VL  - 102
IS  - 12
DO  - 10.1111/jace.16668
ER  - 
@article{
author = "Pavlović, Vera P. and Vujančević, Jelena and Mašković, Pavle and Ćirković, Jovana and Papan, Jelena M. and Kosanović, Darko and Dramićanin, Miroslav and Petrović, Predrag B. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO2 (up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO2 and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X-ray diffraction and nitrogen adsorption-desorption measurements. UV-Vis diffuse reflectance spectra were recorded and the Kubelka-Munk function was applied to convert reflectance into the equivalent band gap energy (Eg) and, consequently, to investigate changes in the Eg value. X-ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO2-based materials with antimicrobial properties that could be used in numerous green technology applications.",
publisher = "Wiley",
journal = "Journal of the American Ceramic Society",
title = "Structure and enhanced antimicrobial activity of mechanically activated nano TiO2",
pages = "7735-7745",
volume = "102",
number = "12",
doi = "10.1111/jace.16668"
}
Pavlović, V. P., Vujančević, J., Mašković, P., Ćirković, J., Papan, J. M., Kosanović, D., Dramićanin, M., Petrović, P. B., Vlahović, B.,& Pavlović, V. B. (2019). Structure and enhanced antimicrobial activity of mechanically activated nano TiO2.
Journal of the American Ceramic Society
Wiley., 102(12), 7735-7745.
https://doi.org/10.1111/jace.16668
Pavlović VP, Vujančević J, Mašković P, Ćirković J, Papan JM, Kosanović D, Dramićanin M, Petrović PB, Vlahović B, Pavlović VB. Structure and enhanced antimicrobial activity of mechanically activated nano TiO2. Journal of the American Ceramic Society. 2019;102(12):7735-7745.
doi:10.1111/jace.16668.
Pavlović Vera P., Vujančević Jelena, Mašković Pavle, Ćirković Jovana, Papan Jelena M., Kosanović Darko, Dramićanin Miroslav, Petrović Predrag B., Vlahović Branislav, Pavlović Vladimir B., "Structure and enhanced antimicrobial activity of mechanically activated nano TiO2" Journal of the American Ceramic Society, 102, no. 12 (2019):7735-7745,
https://doi.org/10.1111/jace.16668 .
7
2
2

Analysis of the initial-stage sintering of mechanically activated SrTiO3

Živojinović, Jelena; Pavlović, Vera P.; Labus, Nebojša; Blagojević, Vladimir A.; Kosanović, Darko; Pavlović, Vladimir B.

(ETRAN, 2019)

TY  - JOUR
AU  - Živojinović, Jelena
AU  - Pavlović, Vera P.
AU  - Labus, Nebojša
AU  - Blagojević, Vladimir A.
AU  - Kosanović, Darko
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - The initial-stage of sintering plays a significant role in determining the final microstructure that defines the main characteristics of electroceramics materials such as functional properties. In this article non-isothermal sintering of non-activated and mechanically activated SrTiO3 samples was investigated up to 1300 °C. Dilatometric curves indicate that mechanical activation leads to an earlier onset of sintering, suggesting that it should lead to a more homogenous and denser sintered product. Analysis of the initial stage of sintering reveals that the sintering process of all examinated samples consists of two or three overlapping single-step processes, with a change in the dominant mass transport mechanism. The values of apparent activation energy of the considered single-step process exhibit a significant decrease with an increase in mechanical activation time. The values of the density of samples after isothermal sintering indicate that the final stage of sintering has not been reached by 1300 °C. © 2018 Authors.
PB  - ETRAN
T2  - Science of Sintering
T1  - Analysis of the initial-stage sintering of mechanically activated SrTiO3
SP  - 199
EP  - 208
VL  - 51
IS  - 2
DO  - 10.2298/SOS1902199Z
ER  - 
@article{
author = "Živojinović, Jelena and Pavlović, Vera P. and Labus, Nebojša and Blagojević, Vladimir A. and Kosanović, Darko and Pavlović, Vladimir B.",
year = "2019",
abstract = "The initial-stage of sintering plays a significant role in determining the final microstructure that defines the main characteristics of electroceramics materials such as functional properties. In this article non-isothermal sintering of non-activated and mechanically activated SrTiO3 samples was investigated up to 1300 °C. Dilatometric curves indicate that mechanical activation leads to an earlier onset of sintering, suggesting that it should lead to a more homogenous and denser sintered product. Analysis of the initial stage of sintering reveals that the sintering process of all examinated samples consists of two or three overlapping single-step processes, with a change in the dominant mass transport mechanism. The values of apparent activation energy of the considered single-step process exhibit a significant decrease with an increase in mechanical activation time. The values of the density of samples after isothermal sintering indicate that the final stage of sintering has not been reached by 1300 °C. © 2018 Authors.",
publisher = "ETRAN",
journal = "Science of Sintering",
title = "Analysis of the initial-stage sintering of mechanically activated SrTiO3",
pages = "199-208",
volume = "51",
number = "2",
doi = "10.2298/SOS1902199Z"
}
Živojinović, J., Pavlović, V. P., Labus, N., Blagojević, V. A., Kosanović, D.,& Pavlović, V. B. (2019). Analysis of the initial-stage sintering of mechanically activated SrTiO3.
Science of Sintering
ETRAN., 51(2), 199-208.
https://doi.org/10.2298/SOS1902199Z
Živojinović J, Pavlović VP, Labus N, Blagojević VA, Kosanović D, Pavlović VB. Analysis of the initial-stage sintering of mechanically activated SrTiO3. Science of Sintering. 2019;51(2):199-208.
doi:10.2298/SOS1902199Z.
Živojinović Jelena, Pavlović Vera P., Labus Nebojša, Blagojević Vladimir A., Kosanović Darko, Pavlović Vladimir B., "Analysis of the initial-stage sintering of mechanically activated SrTiO3" Science of Sintering, 51, no. 2 (2019):199-208,
https://doi.org/10.2298/SOS1902199Z .
2
2

Supporting information for the article: Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V., Janaćković, Đ., 2019. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International 45, 10013–10020. https://doi.org/10.1016/j.ceramint.2019.02.045

Vujančević, Jelena; Andričević, Pavao; Bjelajac, Anđelika; Đokić, Veljko; Popović, Maja; Rakočević, Zlatko; Horváth, Endre; Kollár, Márton; Náfrádi, Bálint; Schiller, Andreas; Domanski, Konrad; Forró, Laszlo; Pavlović, Vera P.; Janaćković, Đorđe

(2019)

TY  - BOOK
AU  - Vujančević, Jelena
AU  - Andričević, Pavao
AU  - Bjelajac, Anđelika
AU  - Đokić, Veljko
AU  - Popović, Maja
AU  - Rakočević, Zlatko
AU  - Horváth, Endre
AU  - Kollár, Márton
AU  - Náfrádi, Bálint
AU  - Schiller, Andreas
AU  - Domanski, Konrad
AU  - Forró, Laszlo
AU  - Pavlović, Vera P.
AU  - Janaćković, Đorđe
PY  - 2019
T2  - Ceramics International
T1  - Supporting information for the article: Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V., Janaćković, Đ., 2019. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International 45, 10013–10020. https://doi.org/10.1016/j.ceramint.2019.02.045
UR  - https://hdl.handle.net/21.15107/rcub_dais_5969
ER  - 
@book{
author = "Vujančević, Jelena and Andričević, Pavao and Bjelajac, Anđelika and Đokić, Veljko and Popović, Maja and Rakočević, Zlatko and Horváth, Endre and Kollár, Márton and Náfrádi, Bálint and Schiller, Andreas and Domanski, Konrad and Forró, Laszlo and Pavlović, Vera P. and Janaćković, Đorđe",
year = "2019",
journal = "Ceramics International",
title = "Supporting information for the article: Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V., Janaćković, Đ., 2019. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International 45, 10013–10020. https://doi.org/10.1016/j.ceramint.2019.02.045",
url = "https://hdl.handle.net/21.15107/rcub_dais_5969"
}
Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V. P.,& Janaćković, Đ. (2019). Supporting information for the article: Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V., Janaćković, Đ., 2019. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International 45, 10013–10020. https://doi.org/10.1016/j.ceramint.2019.02.045.
Ceramics International.
Vujančević J, Andričević P, Bjelajac A, Đokić V, Popović M, Rakočević Z, Horváth E, Kollár M, Náfrádi B, Schiller A, Domanski K, Forró L, Pavlović VP, Janaćković Đ. Supporting information for the article: Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V., Janaćković, Đ., 2019. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International 45, 10013–10020. https://doi.org/10.1016/j.ceramint.2019.02.045. Ceramics International. 2019;.
Vujančević Jelena, Andričević Pavao, Bjelajac Anđelika, Đokić Veljko, Popović Maja, Rakočević Zlatko, Horváth Endre, Kollár Márton, Náfrádi Bálint, Schiller Andreas, Domanski Konrad, Forró Laszlo, Pavlović Vera P., Janaćković Đorđe, "Supporting information for the article: Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V., Janaćković, Đ., 2019. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International 45, 10013–10020. https://doi.org/10.1016/j.ceramint.2019.02.045" Ceramics International (2019)

Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping

Vujančević, Jelena; Andričević, Pavao; Bjelajac, Anđelika; Đokić, Veljko; Popović, Maja; Rakočević, Zlatko; Horváth, Endre; Kollár, Márton; Náfrádi, Bálint; Schiller, Andreas; Domanski, Konrad; Forró, Laszlo; Pavlović, Vera P.; Janaćković, Đorđe

(Elsevier, 2019)

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Andričević, Pavao
AU  - Bjelajac, Anđelika
AU  - Đokić, Veljko
AU  - Popović, Maja
AU  - Rakočević, Zlatko
AU  - Horváth, Endre
AU  - Kollár, Márton
AU  - Náfrádi, Bálint
AU  - Schiller, Andreas
AU  - Domanski, Konrad
AU  - Forró, Laszlo
AU  - Pavlović, Vera P.
AU  - Janaćković, Đorđe
PY  - 2019
AB  - Highly ordered, anodically grown TiO 2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping (≤2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes with an average outer diameter of 101.5 ± 1.5 nm and an average wall thickness of about 13 nm. Anatase crystals were formed inside the tubes after annealing in ammonia atmosphere for 30 min. With further annealing, rutile peaks appeared due to the thermal oxidation of the foil and rise as the duration of heat treatment was increased. The concentration and chemical nature of nitrogen in the nanotube arrays can be correlated to the optical response of dry-pressed heterojunctions of doped TiO 2 /CH 3 NH 3 PbI 3 single crystals. The N-TiO 2 /perovskite heterojunction with the highest amount of interstitial nitrogen exhibited an improved photocurrent, indicating the importance of the semiconductor doping-based heterojunction optimization strategies to deliver competitive levels of halide perovskite-based optoelectronic devices to be envisioned for urban infrastructures. © 2019
PB  - Elsevier
T2  - Ceramics International
T1  - Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping
SP  - 10013
EP  - 10020
VL  - 45
IS  - 8
DO  - 10.1016/j.ceramint.2019.02.045
UR  - https://hdl.handle.net/21.15107/rcub_dais_5084
ER  - 
@article{
author = "Vujančević, Jelena and Andričević, Pavao and Bjelajac, Anđelika and Đokić, Veljko and Popović, Maja and Rakočević, Zlatko and Horváth, Endre and Kollár, Márton and Náfrádi, Bálint and Schiller, Andreas and Domanski, Konrad and Forró, Laszlo and Pavlović, Vera P. and Janaćković, Đorđe",
year = "2019",
abstract = "Highly ordered, anodically grown TiO 2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping (≤2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes with an average outer diameter of 101.5 ± 1.5 nm and an average wall thickness of about 13 nm. Anatase crystals were formed inside the tubes after annealing in ammonia atmosphere for 30 min. With further annealing, rutile peaks appeared due to the thermal oxidation of the foil and rise as the duration of heat treatment was increased. The concentration and chemical nature of nitrogen in the nanotube arrays can be correlated to the optical response of dry-pressed heterojunctions of doped TiO 2 /CH 3 NH 3 PbI 3 single crystals. The N-TiO 2 /perovskite heterojunction with the highest amount of interstitial nitrogen exhibited an improved photocurrent, indicating the importance of the semiconductor doping-based heterojunction optimization strategies to deliver competitive levels of halide perovskite-based optoelectronic devices to be envisioned for urban infrastructures. © 2019",
publisher = "Elsevier",
journal = "Ceramics International",
title = "Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping",
pages = "10013-10020",
volume = "45",
number = "8",
doi = "10.1016/j.ceramint.2019.02.045",
url = "https://hdl.handle.net/21.15107/rcub_dais_5084"
}
Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V. P.,& Janaćković, Đ. (2019). Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping.
Ceramics International
Elsevier., 45(8), 10013-10020.
https://doi.org/10.1016/j.ceramint.2019.02.045
Vujančević J, Andričević P, Bjelajac A, Đokić V, Popović M, Rakočević Z, Horváth E, Kollár M, Náfrádi B, Schiller A, Domanski K, Forró L, Pavlović VP, Janaćković Đ. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International. 2019;45(8):10013-10020.
doi:10.1016/j.ceramint.2019.02.045.
Vujančević Jelena, Andričević Pavao, Bjelajac Anđelika, Đokić Veljko, Popović Maja, Rakočević Zlatko, Horváth Endre, Kollár Márton, Náfrádi Bálint, Schiller Andreas, Domanski Konrad, Forró Laszlo, Pavlović Vera P., Janaćković Đorđe, "Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping" Ceramics International, 45, no. 8 (2019):10013-10020,
https://doi.org/10.1016/j.ceramint.2019.02.045 .
3
2
1

Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping

Vujančević, Jelena; Andričević, Pavao; Bjelajac, Anđelika; Đokić, Veljko; Popović, Maja; Rakočević, Zlatko; Horváth, Endre; Kollár, Márton; Náfrádi, Bálint; Schiller, Andreas; Domanski, Konrad; Forró, Laszlo; Pavlović, Vera P.; Janaćković, Đorđe

(Elsevier, 2019)

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Andričević, Pavao
AU  - Bjelajac, Anđelika
AU  - Đokić, Veljko
AU  - Popović, Maja
AU  - Rakočević, Zlatko
AU  - Horváth, Endre
AU  - Kollár, Márton
AU  - Náfrádi, Bálint
AU  - Schiller, Andreas
AU  - Domanski, Konrad
AU  - Forró, Laszlo
AU  - Pavlović, Vera P.
AU  - Janaćković, Đorđe
PY  - 2019
AB  - Highly ordered, anodically grown TiO 2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping (≤2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes with an average outer diameter of 101.5 ± 1.5 nm and an average wall thickness of about 13 nm. Anatase crystals were formed inside the tubes after annealing in ammonia atmosphere for 30 min. With further annealing, rutile peaks appeared due to the thermal oxidation of the foil and rise as the duration of heat treatment was increased. The concentration and chemical nature of nitrogen in the nanotube arrays can be correlated to the optical response of dry-pressed heterojunctions of doped TiO 2 /CH 3 NH 3 PbI 3 single crystals. The N-TiO 2 /perovskite heterojunction with the highest amount of interstitial nitrogen exhibited an improved photocurrent, indicating the importance of the semiconductor doping-based heterojunction optimization strategies to deliver competitive levels of halide perovskite-based optoelectronic devices to be envisioned for urban infrastructures. © 2019
PB  - Elsevier
T2  - Ceramics International
T1  - Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping
SP  - 10013
EP  - 10020
VL  - 45
IS  - 8
DO  - 10.1016/j.ceramint.2019.02.045
UR  - https://hdl.handle.net/21.15107/rcub_dais_5765
ER  - 
@article{
author = "Vujančević, Jelena and Andričević, Pavao and Bjelajac, Anđelika and Đokić, Veljko and Popović, Maja and Rakočević, Zlatko and Horváth, Endre and Kollár, Márton and Náfrádi, Bálint and Schiller, Andreas and Domanski, Konrad and Forró, Laszlo and Pavlović, Vera P. and Janaćković, Đorđe",
year = "2019",
abstract = "Highly ordered, anodically grown TiO 2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping (≤2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes with an average outer diameter of 101.5 ± 1.5 nm and an average wall thickness of about 13 nm. Anatase crystals were formed inside the tubes after annealing in ammonia atmosphere for 30 min. With further annealing, rutile peaks appeared due to the thermal oxidation of the foil and rise as the duration of heat treatment was increased. The concentration and chemical nature of nitrogen in the nanotube arrays can be correlated to the optical response of dry-pressed heterojunctions of doped TiO 2 /CH 3 NH 3 PbI 3 single crystals. The N-TiO 2 /perovskite heterojunction with the highest amount of interstitial nitrogen exhibited an improved photocurrent, indicating the importance of the semiconductor doping-based heterojunction optimization strategies to deliver competitive levels of halide perovskite-based optoelectronic devices to be envisioned for urban infrastructures. © 2019",
publisher = "Elsevier",
journal = "Ceramics International",
title = "Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping",
pages = "10013-10020",
volume = "45",
number = "8",
doi = "10.1016/j.ceramint.2019.02.045",
url = "https://hdl.handle.net/21.15107/rcub_dais_5765"
}
Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V. P.,& Janaćković, Đ. (2019). Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping.
Ceramics International
Elsevier., 45(8), 10013-10020.
https://doi.org/10.1016/j.ceramint.2019.02.045
Vujančević J, Andričević P, Bjelajac A, Đokić V, Popović M, Rakočević Z, Horváth E, Kollár M, Náfrádi B, Schiller A, Domanski K, Forró L, Pavlović VP, Janaćković Đ. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International. 2019;45(8):10013-10020.
doi:10.1016/j.ceramint.2019.02.045.
Vujančević Jelena, Andričević Pavao, Bjelajac Anđelika, Đokić Veljko, Popović Maja, Rakočević Zlatko, Horváth Endre, Kollár Márton, Náfrádi Bálint, Schiller Andreas, Domanski Konrad, Forró Laszlo, Pavlović Vera P., Janaćković Đorđe, "Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping" Ceramics International, 45, no. 8 (2019):10013-10020,
https://doi.org/10.1016/j.ceramint.2019.02.045 .
3
2
1

Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing

Nikolić, Maria Vesna; Vasiljević, Zorka Ž.; Luković, Miloljub D.; Pavlović, Vera P.; Krstić, Jugoslav B.; Vujančević, Jelena; Tadić, Nenad B.; Vlahović, Branislav; Pavlović, Vladimir B.

(John Wiley & Sons, Inc., 2019)

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Vasiljević, Zorka Ž.
AU  - Luković, Miloljub D.
AU  - Pavlović, Vera P.
AU  - Krstić, Jugoslav B.
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.
PB  - John Wiley & Sons, Inc.
T2  - International Journal of Applied Ceramic Technology
T1  - Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing
SP  - 981
EP  - 993
VL  - 16
IS  - 3
DO  - 10.1111/ijac.13190
ER  - 
@article{
author = "Nikolić, Maria Vesna and Vasiljević, Zorka Ž. and Luković, Miloljub D. and Pavlović, Vera P. and Krstić, Jugoslav B. and Vujančević, Jelena and Tadić, Nenad B. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.",
publisher = "John Wiley & Sons, Inc.",
journal = "International Journal of Applied Ceramic Technology",
title = "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing",
pages = "981-993",
volume = "16",
number = "3",
doi = "10.1111/ijac.13190"
}
Nikolić, M. V., Vasiljević, Z. Ž., Luković, M. D., Pavlović, V. P., Krstić, J. B., Vujančević, J., Tadić, N. B., Vlahović, B.,& Pavlović, V. B. (2019). Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing.
International Journal of Applied Ceramic Technology
John Wiley & Sons, Inc.., 16(3), 981-993.
https://doi.org/10.1111/ijac.13190
Nikolić MV, Vasiljević ZŽ, Luković MD, Pavlović VP, Krstić JB, Vujančević J, Tadić NB, Vlahović B, Pavlović VB. Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing. International Journal of Applied Ceramic Technology. 2019;16(3):981-993.
doi:10.1111/ijac.13190.
Nikolić Maria Vesna, Vasiljević Zorka Ž., Luković Miloljub D., Pavlović Vera P., Krstić Jugoslav B., Vujančević Jelena, Tadić Nenad B., Vlahović Branislav, Pavlović Vladimir B., "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing" International Journal of Applied Ceramic Technology, 16, no. 3 (2019):981-993,
https://doi.org/10.1111/ijac.13190 .
13
9
12

Structure, morphology and photocatalytic properties of CoxMg1-xFe2O4 (0<x<1) spinel ferrites obtained by sol-gel synthesis

Vasiljević, Zorka Ž.; Dojčinović, Milena; Pavlović, Vera P.; Vujančević, Jelena; Tadić, Nenad B.; Nikolić, Maria Vesna

(Belgrade : Materials Research Society of Serbia, 2019)

TY  - CONF
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena
AU  - Pavlović, Vera P.
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Nikolić, Maria Vesna
PY  - 2019
AB  - Nanocrystalline cobalt magnesium ferrites with varying cobalt and magnesium content (CoxMg1-xFe2O4, 0<x<1) were synthesized using the sol-gel self-combustion method with citric acid as fuel, followed by calcination at 700 C for 2 hours. Structural characterization was performed using Xray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and Raman spectroscopy. It confirmed the formation of agglomerated nanocrystalline ferrites with an inverse cubic spinel structure. The optical band gap energy was determined using UV/Vis spectrophotometry. It reduced with increased Co content. Visible light photocatalytic activity was tested using natural and artificial light sources through a series of experimental degradations of the methylene blue (MB) solution.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019
T1  - Structure, morphology and photocatalytic properties of CoxMg1-xFe2O4 (0<x<1) spinel ferrites obtained by sol-gel synthesis
SP  - 126
EP  - 126
ER  - 
@conference{
author = "Vasiljević, Zorka Ž. and Dojčinović, Milena and Pavlović, Vera P. and Vujančević, Jelena and Tadić, Nenad B. and Nikolić, Maria Vesna",
year = "2019",
abstract = "Nanocrystalline cobalt magnesium ferrites with varying cobalt and magnesium content (CoxMg1-xFe2O4, 0<x<1) were synthesized using the sol-gel self-combustion method with citric acid as fuel, followed by calcination at 700 C for 2 hours. Structural characterization was performed using Xray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and Raman spectroscopy. It confirmed the formation of agglomerated nanocrystalline ferrites with an inverse cubic spinel structure. The optical band gap energy was determined using UV/Vis spectrophotometry. It reduced with increased Co content. Visible light photocatalytic activity was tested using natural and artificial light sources through a series of experimental degradations of the methylene blue (MB) solution.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019",
title = "Structure, morphology and photocatalytic properties of CoxMg1-xFe2O4 (0<x<1) spinel ferrites obtained by sol-gel synthesis",
pages = "126-126"
}
Vasiljević, Z. Ž., Dojčinović, M., Pavlović, V. P., Vujančević, J., Tadić, N. B.,& Nikolić, M. V. (2019). Structure, morphology and photocatalytic properties of CoxMg1-xFe2O4 (0<x<1) spinel ferrites obtained by sol-gel synthesis.
Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019
Belgrade : Materials Research Society of Serbia., 126-126.
Vasiljević ZŽ, Dojčinović M, Pavlović VP, Vujančević J, Tadić NB, Nikolić MV. Structure, morphology and photocatalytic properties of CoxMg1-xFe2O4 (0<x<1) spinel ferrites obtained by sol-gel synthesis. Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019. 2019;:126-126.
Vasiljević Zorka Ž., Dojčinović Milena, Pavlović Vera P., Vujančević Jelena, Tadić Nenad B., Nikolić Maria Vesna, "Structure, morphology and photocatalytic properties of CoxMg1-xFe2O4 (0<x<1) spinel ferrites obtained by sol-gel synthesis" Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019 (2019):126-126

Visible light photocatalytic activity of nanocrystalline CoxMg1-xFe2O4 (x = 0-1)

Dojčinović, Milena; Vasiljević, Zorka Ž.; Vujančević, Jelena; Pavlović, Vera P.; Marković, Smilja; Tadić, Nenad B.; Nikolić, Marina V.

(Novi Sad : Faculty of Technology, 2019)

TY  - CONF
AU  - Dojčinović, Milena
AU  - Vasiljević, Zorka Ž.
AU  - Vujančević, Jelena
AU  - Pavlović, Vera P.
AU  - Marković, Smilja
AU  - Tadić, Nenad B.
AU  - Nikolić, Marina V.
PY  - 2019
AB  - The sol-gel combustion method was applied for synthesis of spinel magnesium cobalt ferrites CoxMg1-xFe2O4, with varying cobalt and magnesium content, x = 0.0, 0.1, 0.3, 0.5, 0.7, 0.9. Magnesium nitrate, cobalt nitrate and iron nitrate were used as oxidizers and citric acid was used as a reducing agent. Structural and morphological properties of the obtained ferrite powders were investigated and characterized by X-ray diffraction (XRD), Raman spectroscopy, Field emission scanning electron microscope (FESEM) and Fourier transform infrared (FT-IR) spectroscopy. Optical properties were investigated by UV-VIS spectrophotometry. A cubic spinel structure with multigrain agglomerates formed. Visible light photocatalytic activity of the spinel ferrite powder samples was evaluated by measuring the rate of photodegradation reaction of methylene blue (MB). After 240 min Co0.1Mg0.9Fe2O4 showed the best rate of photodecomposition of MB resulting in 90% of its initial concentration in an alkaline environment.
PB  - Novi Sad : Faculty of Technology
C3  - Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad
T1  - Visible light photocatalytic activity of nanocrystalline CoxMg1-xFe2O4 (x = 0-1)
SP  - 136
EP  - 136
ER  - 
@conference{
author = "Dojčinović, Milena and Vasiljević, Zorka Ž. and Vujančević, Jelena and Pavlović, Vera P. and Marković, Smilja and Tadić, Nenad B. and Nikolić, Marina V.",
year = "2019",
abstract = "The sol-gel combustion method was applied for synthesis of spinel magnesium cobalt ferrites CoxMg1-xFe2O4, with varying cobalt and magnesium content, x = 0.0, 0.1, 0.3, 0.5, 0.7, 0.9. Magnesium nitrate, cobalt nitrate and iron nitrate were used as oxidizers and citric acid was used as a reducing agent. Structural and morphological properties of the obtained ferrite powders were investigated and characterized by X-ray diffraction (XRD), Raman spectroscopy, Field emission scanning electron microscope (FESEM) and Fourier transform infrared (FT-IR) spectroscopy. Optical properties were investigated by UV-VIS spectrophotometry. A cubic spinel structure with multigrain agglomerates formed. Visible light photocatalytic activity of the spinel ferrite powder samples was evaluated by measuring the rate of photodegradation reaction of methylene blue (MB). After 240 min Co0.1Mg0.9Fe2O4 showed the best rate of photodecomposition of MB resulting in 90% of its initial concentration in an alkaline environment.",
publisher = "Novi Sad : Faculty of Technology",
journal = "Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad",
title = "Visible light photocatalytic activity of nanocrystalline CoxMg1-xFe2O4 (x = 0-1)",
pages = "136-136"
}
Dojčinović, M., Vasiljević, Z. Ž., Vujančević, J., Pavlović, V. P., Marković, S., Tadić, N. B.,& Nikolić, M. V. (2019). Visible light photocatalytic activity of nanocrystalline CoxMg1-xFe2O4 (x = 0-1).
Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad
Novi Sad : Faculty of Technology., 136-136.
Dojčinović M, Vasiljević ZŽ, Vujančević J, Pavlović VP, Marković S, Tadić NB, Nikolić MV. Visible light photocatalytic activity of nanocrystalline CoxMg1-xFe2O4 (x = 0-1). Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad. 2019;:136-136.
Dojčinović Milena, Vasiljević Zorka Ž., Vujančević Jelena, Pavlović Vera P., Marković Smilja, Tadić Nenad B., Nikolić Marina V., "Visible light photocatalytic activity of nanocrystalline CoxMg1-xFe2O4 (x = 0-1)" Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad (2019):136-136

Influence of Co2+ ions on photocatalytic properties of MgFe2O4 ferrites

Vasiljević, Zorka Ž.; Dojčinović, Milena; Pavlović, Vera P.; Vujančević, Jelena; Marković, Smilja; Tadić, Nenad B.; Nikolić, Maria Vesna

(Belgrade : Institute for Multidisciplinary Research, 2019)

TY  - CONF
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena
AU  - Pavlović, Vera P.
AU  - Vujančević, Jelena
AU  - Marković, Smilja
AU  - Tadić, Nenad B.
AU  - Nikolić, Maria Vesna
PY  - 2019
AB  - In this work, spinel magnesium cobalt ferrites (CoxMg1-xFe2O4, x = 0.0, 0.1, 0.3, 0.5, 0.7, 0.9) were synthesized by a sol-gel combustion method. Magnesium nitrate, cobalt nitrate and iron nitrate were used as oxidizers and citric acid was used as a reducing agent. The effects of cobalt ions on structural and morphological properties were investigated and characterized by X-ray diffraction (XRD), Raman spectroscopy, Field emission scanning electron microscope (FESEM) and Fourier transform infrared (FT-IR) spectroscopy. A cubic spinel structure formed with a varied distribution of cobalt and magnesium ions on tetrahedral and octahedral sites that depended on their content. All ferrite powders consisted of multigrain agglomerates. Optical properties were investigated by UV- vis spectrophotometry. The photocatalytic activity of as prepared samples was evaluated by measuring the rate of photodegradation reaction of methylene blue (MB) under visible light irradiation. After 240 min, compared to other samples, the sample labeled as Co0.1Mg0.9Fe2O4 showed the best rate of photodecomposition of MB resulting in reduction of 90% of its initial concentration.
PB  - Belgrade : Institute for Multidisciplinary Research
C3  - Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, Serbia
T1  - Influence of Co2+ ions on photocatalytic properties of MgFe2O4 ferrites
SP  - 73
EP  - 73
ER  - 
@conference{
author = "Vasiljević, Zorka Ž. and Dojčinović, Milena and Pavlović, Vera P. and Vujančević, Jelena and Marković, Smilja and Tadić, Nenad B. and Nikolić, Maria Vesna",
year = "2019",
abstract = "In this work, spinel magnesium cobalt ferrites (CoxMg1-xFe2O4, x = 0.0, 0.1, 0.3, 0.5, 0.7, 0.9) were synthesized by a sol-gel combustion method. Magnesium nitrate, cobalt nitrate and iron nitrate were used as oxidizers and citric acid was used as a reducing agent. The effects of cobalt ions on structural and morphological properties were investigated and characterized by X-ray diffraction (XRD), Raman spectroscopy, Field emission scanning electron microscope (FESEM) and Fourier transform infrared (FT-IR) spectroscopy. A cubic spinel structure formed with a varied distribution of cobalt and magnesium ions on tetrahedral and octahedral sites that depended on their content. All ferrite powders consisted of multigrain agglomerates. Optical properties were investigated by UV- vis spectrophotometry. The photocatalytic activity of as prepared samples was evaluated by measuring the rate of photodegradation reaction of methylene blue (MB) under visible light irradiation. After 240 min, compared to other samples, the sample labeled as Co0.1Mg0.9Fe2O4 showed the best rate of photodecomposition of MB resulting in reduction of 90% of its initial concentration.",
publisher = "Belgrade : Institute for Multidisciplinary Research",
journal = "Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, Serbia",
title = "Influence of Co2+ ions on photocatalytic properties of MgFe2O4 ferrites",
pages = "73-73"
}
Vasiljević, Z. Ž., Dojčinović, M., Pavlović, V. P., Vujančević, J., Marković, S., Tadić, N. B.,& Nikolić, M. V. (2019). Influence of Co2+ ions on photocatalytic properties of MgFe2O4 ferrites.
Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, Serbia
Belgrade : Institute for Multidisciplinary Research., 73-73.
Vasiljević ZŽ, Dojčinović M, Pavlović VP, Vujančević J, Marković S, Tadić NB, Nikolić MV. Influence of Co2+ ions on photocatalytic properties of MgFe2O4 ferrites. Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, Serbia. 2019;:73-73.
Vasiljević Zorka Ž., Dojčinović Milena, Pavlović Vera P., Vujančević Jelena, Marković Smilja, Tadić Nenad B., Nikolić Maria Vesna, "Influence of Co2+ ions on photocatalytic properties of MgFe2O4 ferrites" Programme and the Book of Abstracts / 5th Conference of The Serbian Society for Ceramic Materials, 5CSCS-2019, June 11-13, 2019, Belgrade, Serbia (2019):73-73

Finding optimal conditions and investigating the structure & morphology of cobalt/magnesium ferrite based cubic spinels (CoxMg1-xFe2O4) as photocatalysts

Dojčinović, Milena; Vasiljević, Zorka Ž.; Tadić, Nenad B.; Pavlović, Vera P.; Barišić, Dario; Pajić, Damir; Nikolić, Maria Vesna

(Belgrade : Institute of Technical Sciences of SASA, 2019)

TY  - CONF
AU  - Dojčinović, Milena
AU  - Vasiljević, Zorka Ž.
AU  - Tadić, Nenad B.
AU  - Pavlović, Vera P.
AU  - Barišić, Dario
AU  - Pajić, Damir
AU  - Nikolić, Maria Vesna
PY  - 2019
AB  - Cobalt/magnesium ferrites with various mole percentage ratio of the metals (obtained structures are CoxMg1-xFe2O4 with x being 0, 0.1, 0.3, 0.5, 0.7, 0.9, 1.0) were synthesized by sol-gel combustion synthesis using glycine as fuel, following the rules of propellant chemistry. The powders were then sintered at 700 °C for 3 hours. Obtained powders were characterized by X-Ray diffraction (XRD), scanning electron microscopy (SEM), Raman
spectroscopy, UV/vis diffuse reflectance spectroscopy (DRS). Investigation of the magnetic properties was also conducted by vibrating sample magnetometry (VSM). The obtained powders were proved to be phase-pure cubic spinels which formed agglomerated micrograins. Series of photocatalytic experiments of methylene blue degradation were done.
The influence of different experimental conditions was investigated including variations of: pH values, concentrations of the pollutant, masses of the photocatalyst, different light sources and therefore different light irradiation. Interesting results, including enhancement of the degradation rate with the introduction of cobalt into MgFe2O4 and decrease of the degradation rate with further increase of cobalt content and formation of hard agglomerates, open new possibilities for further investigation of the utilisation of Co/Mg ferrites as photocatalysts.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia
T1  - Finding optimal conditions and investigating the structure & morphology of cobalt/magnesium ferrite based cubic spinels (CoxMg1-xFe2O4) as photocatalysts
SP  - 71
EP  - 71
ER  - 
@conference{
author = "Dojčinović, Milena and Vasiljević, Zorka Ž. and Tadić, Nenad B. and Pavlović, Vera P. and Barišić, Dario and Pajić, Damir and Nikolić, Maria Vesna",
year = "2019",
abstract = "Cobalt/magnesium ferrites with various mole percentage ratio of the metals (obtained structures are CoxMg1-xFe2O4 with x being 0, 0.1, 0.3, 0.5, 0.7, 0.9, 1.0) were synthesized by sol-gel combustion synthesis using glycine as fuel, following the rules of propellant chemistry. The powders were then sintered at 700 °C for 3 hours. Obtained powders were characterized by X-Ray diffraction (XRD), scanning electron microscopy (SEM), Raman
spectroscopy, UV/vis diffuse reflectance spectroscopy (DRS). Investigation of the magnetic properties was also conducted by vibrating sample magnetometry (VSM). The obtained powders were proved to be phase-pure cubic spinels which formed agglomerated micrograins. Series of photocatalytic experiments of methylene blue degradation were done.
The influence of different experimental conditions was investigated including variations of: pH values, concentrations of the pollutant, masses of the photocatalyst, different light sources and therefore different light irradiation. Interesting results, including enhancement of the degradation rate with the introduction of cobalt into MgFe2O4 and decrease of the degradation rate with further increase of cobalt content and formation of hard agglomerates, open new possibilities for further investigation of the utilisation of Co/Mg ferrites as photocatalysts.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia",
title = "Finding optimal conditions and investigating the structure & morphology of cobalt/magnesium ferrite based cubic spinels (CoxMg1-xFe2O4) as photocatalysts",
pages = "71-71"
}
Dojčinović, M., Vasiljević, Z. Ž., Tadić, N. B., Pavlović, V. P., Barišić, D., Pajić, D.,& Nikolić, M. V. (2019). Finding optimal conditions and investigating the structure & morphology of cobalt/magnesium ferrite based cubic spinels (CoxMg1-xFe2O4) as photocatalysts.
Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 71-71.
Dojčinović M, Vasiljević ZŽ, Tadić NB, Pavlović VP, Barišić D, Pajić D, Nikolić MV. Finding optimal conditions and investigating the structure & morphology of cobalt/magnesium ferrite based cubic spinels (CoxMg1-xFe2O4) as photocatalysts. Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia. 2019;:71-71.
Dojčinović Milena, Vasiljević Zorka Ž., Tadić Nenad B., Pavlović Vera P., Barišić Dario, Pajić Damir, Nikolić Maria Vesna, "Finding optimal conditions and investigating the structure & morphology of cobalt/magnesium ferrite based cubic spinels (CoxMg1-xFe2O4) as photocatalysts" Program and the Book of abstracts / Eighteenth Young Researchers' Conference Materials Sciences and Engineering, December 4-6, 2019, Belgrade, Serbia (2019):71-71

Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal

Rusmirović, Jelena; Obradović, Nina; Perendija, Jovana; Umićević, Ana; Kapidžić, Ana; Vlahović, Branislav; Pavlović, Vera; Marinković, Aleksandar D.; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Rusmirović, Jelena
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.
PB  - Springer
T2  - Environmental Science and Pollution Research
T1  - Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
SP  - 12379
EP  - 12398
VL  - 26
IS  - 12
DO  - 10.1007/s11356-019-04625-0
ER  - 
@article{
author = "Rusmirović, Jelena and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
abstract = "Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.",
publisher = "Springer",
journal = "Environmental Science and Pollution Research",
title = "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal",
pages = "12379-12398",
volume = "26",
number = "12",
doi = "10.1007/s11356-019-04625-0"
}
Rusmirović, J., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A. D.,& Pavlović, V. B. (2019). Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal.
Environmental Science and Pollution Research
Springer., 26(12), 12379-12398.
https://doi.org/10.1007/s11356-019-04625-0
Rusmirović J, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović V, Marinković AD, Pavlović VB. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environmental Science and Pollution Research. 2019;26(12):12379-12398.
doi:10.1007/s11356-019-04625-0.
Rusmirović Jelena, Obradović Nina, Perendija Jovana, Umićević Ana, Kapidžić Ana, Vlahović Branislav, Pavlović Vera, Marinković Aleksandar D., Pavlović Vladimir B., "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal" Environmental Science and Pollution Research, 26, no. 12 (2019):12379-12398,
https://doi.org/10.1007/s11356-019-04625-0 .
1
4
6
6

Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering

Obradović, Nina; Pavlović, Vera P.; Kachlik, Martin; Maca, Karel; Olćan, Dragan; Đorđević, Antonije; Tshantshapanyan, Ani; Vlahović, Branislav; Pavlović, Vladimir B.

(Taylor and Francis, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Pavlović, Vera P.
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Olćan, Dragan
AU  - Đorđević, Antonije
AU  - Tshantshapanyan, Ani
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Sintering of pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with the addition of 5 mass % TeO2 was studied. Green bodies were prepared from powder mixtures mechanically activated in a high-energy planetary mill, shaped by uniaxial (20 MPa) and cold isostatic pressing (1000 MPa). The pressure-less sintering of these specimens was performed at 1350°C for 1 h. High relative density over 95% of the theoretical value was obtained through solid-state reaction and pressure-less sintering of powder activated for 40 min, and for the first time reported in the literature. Phase composition and microstructures of sintered samples were determined by XRD and SEM, coupled with EDS mapping. The real part of the complex relative permittivity of the samples was measured at 200 MHz. The loss tangent of all samples was below the resolution of the measurement setup. A strong correlation between the relative permittivity and the density agrees with previously published data.
PB  - Taylor and Francis
T2  - Advances in Applied Ceramics
T1  - Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering
SP  - 241
EP  - 248
VL  - 118
IS  - 5
DO  - 10.1080/17436753.2018.1548150
UR  - https://hdl.handle.net/21.15107/rcub_dais_4557
ER  - 
@article{
author = "Obradović, Nina and Pavlović, Vera P. and Kachlik, Martin and Maca, Karel and Olćan, Dragan and Đorđević, Antonije and Tshantshapanyan, Ani and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Sintering of pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with the addition of 5 mass % TeO2 was studied. Green bodies were prepared from powder mixtures mechanically activated in a high-energy planetary mill, shaped by uniaxial (20 MPa) and cold isostatic pressing (1000 MPa). The pressure-less sintering of these specimens was performed at 1350°C for 1 h. High relative density over 95% of the theoretical value was obtained through solid-state reaction and pressure-less sintering of powder activated for 40 min, and for the first time reported in the literature. Phase composition and microstructures of sintered samples were determined by XRD and SEM, coupled with EDS mapping. The real part of the complex relative permittivity of the samples was measured at 200 MHz. The loss tangent of all samples was below the resolution of the measurement setup. A strong correlation between the relative permittivity and the density agrees with previously published data.",
publisher = "Taylor and Francis",
journal = "Advances in Applied Ceramics",
title = "Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering",
pages = "241-248",
volume = "118",
number = "5",
doi = "10.1080/17436753.2018.1548150",
url = "https://hdl.handle.net/21.15107/rcub_dais_4557"
}
Obradović, N., Pavlović, V. P., Kachlik, M., Maca, K., Olćan, D., Đorđević, A., Tshantshapanyan, A., Vlahović, B.,& Pavlović, V. B. (2019). Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering.
Advances in Applied Ceramics
Taylor and Francis., 118(5), 241-248.
https://doi.org/10.1080/17436753.2018.1548150
Obradović N, Pavlović VP, Kachlik M, Maca K, Olćan D, Đorđević A, Tshantshapanyan A, Vlahović B, Pavlović VB. Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering. Advances in Applied Ceramics. 2019;118(5):241-248.
doi:10.1080/17436753.2018.1548150.
Obradović Nina, Pavlović Vera P., Kachlik Martin, Maca Karel, Olćan Dragan, Đorđević Antonije, Tshantshapanyan Ani, Vlahović Branislav, Pavlović Vladimir B., "Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering" Advances in Applied Ceramics, 118, no. 5 (2019):241-248,
https://doi.org/10.1080/17436753.2018.1548150 .
3
3
3

Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure

Filipović, Suzana; Pavlović, Vera P.; Mitrić, Miodrag; Lević, Steva; Mitrović, Nebojša; Maričić, Aleksa; Vlahović, Branislav; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Lević, Steva
AU  - Mitrović, Nebojša
AU  - Maričić, Aleksa
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.
PB  - Springer
T2  - Journal of Advanced Ceramics
T1  - Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure
SP  - 133
EP  - 147
VL  - 8
IS  - 1
DO  - 10.1007/s40145-018-0301-5
ER  - 
@article{
author = "Filipović, Suzana and Pavlović, Vera P. and Mitrić, Miodrag and Lević, Steva and Mitrović, Nebojša and Maričić, Aleksa and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.",
publisher = "Springer",
journal = "Journal of Advanced Ceramics",
title = "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure",
pages = "133-147",
volume = "8",
number = "1",
doi = "10.1007/s40145-018-0301-5"
}
Filipović, S., Pavlović, V. P., Mitrić, M., Lević, S., Mitrović, N., Maričić, A., Vlahović, B.,& Pavlović, V. B. (2019). Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure.
Journal of Advanced Ceramics
Springer., 8(1), 133-147.
https://doi.org/10.1007/s40145-018-0301-5
Filipović S, Pavlović VP, Mitrić M, Lević S, Mitrović N, Maričić A, Vlahović B, Pavlović VB. Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. Journal of Advanced Ceramics. 2019;8(1):133-147.
doi:10.1007/s40145-018-0301-5.
Filipović Suzana, Pavlović Vera P., Mitrić Miodrag, Lević Steva, Mitrović Nebojša, Maričić Aleksa, Vlahović Branislav, Pavlović Vladimir B., "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure" Journal of Advanced Ceramics, 8, no. 1 (2019):133-147,
https://doi.org/10.1007/s40145-018-0301-5 .
1
4
3
6

Kosanović, D., Blagojević, V.A., Maričić, A., Aleksić, S., Pavlović, V.P., Pavlović, V.B., Vlahović, B., 2018. Influence of mechanical activation on functional properties of barium hexaferrite ceramics. Ceramics International 44, 6666–6672. https://doi.org/10.1016/j.ceramint.2018.01.078: Supplement

Kosanović, Darko; Blagojević, Vladimir A.; Maričić, Aleksa; Aleksić, S.; Pavlović, Vera P.; Pavlović, Vladimir B.; Vlahović, Branislav

(2018)

TY  - BOOK
AU  - Kosanović, Darko
AU  - Blagojević, Vladimir A.
AU  - Maričić, Aleksa
AU  - Aleksić, S.
AU  - Pavlović, Vera P.
AU  - Pavlović, Vladimir B.
AU  - Vlahović, Branislav
PY  - 2018
AB  - Rietveld analysis of XRD patterns of mechanically activated Fe:BaTiO3 powder mixtures sintered at 1200°C
T2  - Ceramics International
T1  - Kosanović, D., Blagojević, V.A., Maričić, A., Aleksić, S., Pavlović, V.P., Pavlović, V.B., Vlahović, B., 2018. Influence of mechanical activation on functional properties of barium hexaferrite ceramics. Ceramics International 44, 6666–6672. https://doi.org/10.1016/j.ceramint.2018.01.078: Supplement
VL  - 44
IS  - 6
UR  - https://hdl.handle.net/21.15107/rcub_dais_3788
ER  - 
@book{
author = "Kosanović, Darko and Blagojević, Vladimir A. and Maričić, Aleksa and Aleksić, S. and Pavlović, Vera P. and Pavlović, Vladimir B. and Vlahović, Branislav",
year = "2018",
abstract = "Rietveld analysis of XRD patterns of mechanically activated Fe:BaTiO3 powder mixtures sintered at 1200°C",
journal = "Ceramics International",
title = "Kosanović, D., Blagojević, V.A., Maričić, A., Aleksić, S., Pavlović, V.P., Pavlović, V.B., Vlahović, B., 2018. Influence of mechanical activation on functional properties of barium hexaferrite ceramics. Ceramics International 44, 6666–6672. https://doi.org/10.1016/j.ceramint.2018.01.078: Supplement",
volume = "44",
number = "6",
url = "https://hdl.handle.net/21.15107/rcub_dais_3788"
}
Kosanović, D., Blagojević, V. A., Maričić, A., Aleksić, S., Pavlović, V. P., Pavlović, V. B.,& Vlahović, B. (2018). Kosanović, D., Blagojević, V.A., Maričić, A., Aleksić, S., Pavlović, V.P., Pavlović, V.B., Vlahović, B., 2018. Influence of mechanical activation on functional properties of barium hexaferrite ceramics. Ceramics International 44, 6666–6672. https://doi.org/10.1016/j.ceramint.2018.01.078: Supplement.
Ceramics International, 44(6).
Kosanović D, Blagojević VA, Maričić A, Aleksić S, Pavlović VP, Pavlović VB, Vlahović B. Kosanović, D., Blagojević, V.A., Maričić, A., Aleksić, S., Pavlović, V.P., Pavlović, V.B., Vlahović, B., 2018. Influence of mechanical activation on functional properties of barium hexaferrite ceramics. Ceramics International 44, 6666–6672. https://doi.org/10.1016/j.ceramint.2018.01.078: Supplement. Ceramics International. 2018;44(6).
Kosanović Darko, Blagojević Vladimir A., Maričić Aleksa, Aleksić S., Pavlović Vera P., Pavlović Vladimir B., Vlahović Branislav, "Kosanović, D., Blagojević, V.A., Maričić, A., Aleksić, S., Pavlović, V.P., Pavlović, V.B., Vlahović, B., 2018. Influence of mechanical activation on functional properties of barium hexaferrite ceramics. Ceramics International 44, 6666–6672. https://doi.org/10.1016/j.ceramint.2018.01.078: Supplement" Ceramics International, 44, no. 6 (2018)

Structure and photocatalytic properties of sintered TiO2 nanotube arrays

Vujančević, Jelena; Bjelajac, Anđelika; Ćirković, Jovana; Pavlović, Vera P.; Horvath, Endre; Forró, László; Vlahović, Branislav; Mitrić, Miodrag; Janaćković, Đorđe; Pavlović, Vladimir B.

(Belgrade : ETRAN, 2018)

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Ćirković, Jovana
AU  - Pavlović, Vera P.
AU  - Horvath, Endre
AU  - Forró, László
AU  - Vlahović, Branislav
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2018
AB  - One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the as-anodized amorphous TiO2 nanotube films were sintered at elevated temperatures. The evolution of the morphology was visualized via scanning electron microscopy (SEM), while the crystalline structure was investigated by X-ray diffraction (XRD) and Raman spectroscopy. The chemical composition was studied by X-ray photoelectron spectroscopy (XPS). The effects of crystallinity and morphology of TiO2 nanotube (NTs) films on photocatalytic degradation of methyl orange (MO) in an aqueous solution under UV light irradiation were also investigated. The TiO2 nanotubes sintered at 650°C for 30 min had the highest degree of crystallinity and exhibited the best photocatalytic activity among the studied TiO2 nanotube films. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. OI 172057 and Grant no. III 45019]
PB  - Belgrade : ETRAN
T2  - Science of Sintering
T2  - Science of Sintering
T1  - Structure and photocatalytic properties of sintered TiO2 nanotube arrays
SP  - 39
EP  - 50
VL  - 50
IS  - 1
DO  - 10.2298/SOS1801039V
UR  - https://hdl.handle.net/21.15107/rcub_dais_4528
ER  - 
@article{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Ćirković, Jovana and Pavlović, Vera P. and Horvath, Endre and Forró, László and Vlahović, Branislav and Mitrić, Miodrag and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2018",
abstract = "One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the as-anodized amorphous TiO2 nanotube films were sintered at elevated temperatures. The evolution of the morphology was visualized via scanning electron microscopy (SEM), while the crystalline structure was investigated by X-ray diffraction (XRD) and Raman spectroscopy. The chemical composition was studied by X-ray photoelectron spectroscopy (XPS). The effects of crystallinity and morphology of TiO2 nanotube (NTs) films on photocatalytic degradation of methyl orange (MO) in an aqueous solution under UV light irradiation were also investigated. The TiO2 nanotubes sintered at 650°C for 30 min had the highest degree of crystallinity and exhibited the best photocatalytic activity among the studied TiO2 nanotube films. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. OI 172057 and Grant no. III 45019]",
publisher = "Belgrade : ETRAN",
journal = "Science of Sintering, Science of Sintering",
title = "Structure and photocatalytic properties of sintered TiO2 nanotube arrays",
pages = "39-50",
volume = "50",
number = "1",
doi = "10.2298/SOS1801039V",
url = "https://hdl.handle.net/21.15107/rcub_dais_4528"
}
Vujančević, J., Bjelajac, A., Ćirković, J., Pavlović, V. P., Horvath, E., Forró, L., Vlahović, B., Mitrić, M., Janaćković, Đ.,& Pavlović, V. B. (2018). Structure and photocatalytic properties of sintered TiO2 nanotube arrays.
Science of Sintering
Belgrade : ETRAN., 50(1), 39-50.
https://doi.org/10.2298/SOS1801039V
Vujančević J, Bjelajac A, Ćirković J, Pavlović VP, Horvath E, Forró L, Vlahović B, Mitrić M, Janaćković Đ, Pavlović VB. Structure and photocatalytic properties of sintered TiO2 nanotube arrays. Science of Sintering. 2018;50(1):39-50.
doi:10.2298/SOS1801039V.
Vujančević Jelena, Bjelajac Anđelika, Ćirković Jovana, Pavlović Vera P., Horvath Endre, Forró László, Vlahović Branislav, Mitrić Miodrag, Janaćković Đorđe, Pavlović Vladimir B., "Structure and photocatalytic properties of sintered TiO2 nanotube arrays" Science of Sintering, 50, no. 1 (2018):39-50,
https://doi.org/10.2298/SOS1801039V .
5
6
7

Customizing nanotubular titania for photocatalytic activity

Vujančević, Jelena; Bjelajac, Anđelika; Ćirković, Jovana; Pavlović, Vera P.; Horváth, Endre; Forró, László; Janaćković, Đorđe; Pavlović, Vladimir B.

(Belgrade : Institute of Technical Sciences of SASA, 2018)

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Ćirković, Jovana
AU  - Pavlović, Vera P.
AU  - Horváth, Endre
AU  - Forró, László
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2018
AB  - Semiconductor TiO2 photocatalysis is a heterogeneous catalysis, where the photons of the sun or artificial light source are activating the catalyst that enters in reactions. The targeted real-world applications are in environmental protection and remediation such as wastewater treatment, air purification and decomposition of harmful organic pollutants. In this talk, I present the synthesis of nanotubular, thin TiO2 coatings with altered morphology and crystallinity made by anodization technique. The influence of the anodization parameters and post-synthesis annealing conditions on the photocatalytic methyl orange dye decomposition was assessed. Different morphology, crystallinity and introducing a dopant into lattice increase electron transport and electron lifetime which further improve photocatalytic activity.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia
T1  - Customizing nanotubular titania for photocatalytic activity
SP  - 77
EP  - 77
UR  - https://hdl.handle.net/21.15107/rcub_dais_4722
ER  - 
@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Ćirković, Jovana and Pavlović, Vera P. and Horváth, Endre and Forró, László and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2018",
abstract = "Semiconductor TiO2 photocatalysis is a heterogeneous catalysis, where the photons of the sun or artificial light source are activating the catalyst that enters in reactions. The targeted real-world applications are in environmental protection and remediation such as wastewater treatment, air purification and decomposition of harmful organic pollutants. In this talk, I present the synthesis of nanotubular, thin TiO2 coatings with altered morphology and crystallinity made by anodization technique. The influence of the anodization parameters and post-synthesis annealing conditions on the photocatalytic methyl orange dye decomposition was assessed. Different morphology, crystallinity and introducing a dopant into lattice increase electron transport and electron lifetime which further improve photocatalytic activity.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia",
title = "Customizing nanotubular titania for photocatalytic activity",
pages = "77-77",
url = "https://hdl.handle.net/21.15107/rcub_dais_4722"
}
Vujančević, J., Bjelajac, A., Ćirković, J., Pavlović, V. P., Horváth, E., Forró, L., Janaćković, Đ.,& Pavlović, V. B. (2018). Customizing nanotubular titania for photocatalytic activity.
Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 77-77.
Vujančević J, Bjelajac A, Ćirković J, Pavlović VP, Horváth E, Forró L, Janaćković Đ, Pavlović VB. Customizing nanotubular titania for photocatalytic activity. Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia. 2018;:77-77.
Vujančević Jelena, Bjelajac Anđelika, Ćirković Jovana, Pavlović Vera P., Horváth Endre, Forró László, Janaćković Đorđe, Pavlović Vladimir B., "Customizing nanotubular titania for photocatalytic activity" Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia (2018):77-77

Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films

Nikolić, Maria Vesna; Vasiljević, Zorka Ž.; Luković, Miloljub D.; Pavlović, Vera P.; Vujančević, Jelena; Radovanović, Milan; Krstić, Jugoslav; Vlahović, Branislav; Pavlović, Vladimir B.

(Elsevier, 2018)

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Vasiljević, Zorka Ž.
AU  - Luković, Miloljub D.
AU  - Pavlović, Vera P.
AU  - Vujančević, Jelena
AU  - Radovanović, Milan
AU  - Krstić, Jugoslav
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2018
AB  - Pseudobrookite based nanopowder was obtained by solid state synthesis of starting hematite and anatase nanopowders in the weight ratio 55:45. Structural and morphological properties were analyzed using X-ray diffraction (XRD), BET, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, UV/Vis diffuse reflectance spectroscopy, Field emission scanning electron microscopy (FESEM) and Transmission electron microscopy (TEM) confirming the formation of nanocrystalline pseudobrookite. The obtained powder was mixed with a binder (ethyl cellulose), dispersant (α-terpinol) and adhesion agents (acetic acid and distilled water) to obtain a thick film paste. It was screen printed on alumina substrate with interdigitated PdAg electrodes and fired at 600 °C for 30 min. Formation of a porous nanocrystalline thick film structure was shown using Scanning electron microscopy (SEM), while Hall measurements enabled determination of carrier mobility. Change of impedance response in the frequency range 42 Hz–1 MHz with humidity was analyzed at room temperature (25 °C) and 50 °C in the relative humidity range 30–90% and 40–90%, respectively. At 42 Hz, and room temperature the impedance reduced ∼28 times, while at 50 °C it reduced ∼147 times in the relative humidity range 40–90%. The sensor showed rapid response (16 s) and relatively low hysteresis (8.39% at 25 °C and 2.64% at 50 °C) showing that this is a promising material for application in humidity sensing.
PB  - Elsevier
T2  - Sensors and Actuators B: Chemical
T1  - Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films
SP  - 654
EP  - 664
VL  - 277
DO  - 10.1016/j.snb.2018.09.063
UR  - https://hdl.handle.net/21.15107/rcub_dais_4527
ER  - 
@article{
author = "Nikolić, Maria Vesna and Vasiljević, Zorka Ž. and Luković, Miloljub D. and Pavlović, Vera P. and Vujančević, Jelena and Radovanović, Milan and Krstić, Jugoslav and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2018",
abstract = "Pseudobrookite based nanopowder was obtained by solid state synthesis of starting hematite and anatase nanopowders in the weight ratio 55:45. Structural and morphological properties were analyzed using X-ray diffraction (XRD), BET, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, UV/Vis diffuse reflectance spectroscopy, Field emission scanning electron microscopy (FESEM) and Transmission electron microscopy (TEM) confirming the formation of nanocrystalline pseudobrookite. The obtained powder was mixed with a binder (ethyl cellulose), dispersant (α-terpinol) and adhesion agents (acetic acid and distilled water) to obtain a thick film paste. It was screen printed on alumina substrate with interdigitated PdAg electrodes and fired at 600 °C for 30 min. Formation of a porous nanocrystalline thick film structure was shown using Scanning electron microscopy (SEM), while Hall measurements enabled determination of carrier mobility. Change of impedance response in the frequency range 42 Hz–1 MHz with humidity was analyzed at room temperature (25 °C) and 50 °C in the relative humidity range 30–90% and 40–90%, respectively. At 42 Hz, and room temperature the impedance reduced ∼28 times, while at 50 °C it reduced ∼147 times in the relative humidity range 40–90%. The sensor showed rapid response (16 s) and relatively low hysteresis (8.39% at 25 °C and 2.64% at 50 °C) showing that this is a promising material for application in humidity sensing.",
publisher = "Elsevier",
journal = "Sensors and Actuators B: Chemical",
title = "Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films",
pages = "654-664",
volume = "277",
doi = "10.1016/j.snb.2018.09.063",
url = "https://hdl.handle.net/21.15107/rcub_dais_4527"
}
Nikolić, M. V., Vasiljević, Z. Ž., Luković, M. D., Pavlović, V. P., Vujančević, J., Radovanović, M., Krstić, J., Vlahović, B.,& Pavlović, V. B. (2018). Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films.
Sensors and Actuators B: Chemical
Elsevier., 277, 654-664.
https://doi.org/10.1016/j.snb.2018.09.063
Nikolić MV, Vasiljević ZŽ, Luković MD, Pavlović VP, Vujančević J, Radovanović M, Krstić J, Vlahović B, Pavlović VB. Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films. Sensors and Actuators B: Chemical. 2018;277:654-664.
doi:10.1016/j.snb.2018.09.063.
Nikolić Maria Vesna, Vasiljević Zorka Ž., Luković Miloljub D., Pavlović Vera P., Vujančević Jelena, Radovanović Milan, Krstić Jugoslav, Vlahović Branislav, Pavlović Vladimir B., "Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films" Sensors and Actuators B: Chemical, 277 (2018):654-664,
https://doi.org/10.1016/j.snb.2018.09.063 .
20
16
17

Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films

Nikolić, Maria Vesna; Vasiljević, Zorka Ž.; Luković, Miloljub D.; Pavlović, Vera P.; Vujančević, Jelena; Radovanović, Milan; Krstić, Jugoslav; Vlahović, Branislav; Pavlović, Vladimir B.

(Elsevier, 2018)

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Vasiljević, Zorka Ž.
AU  - Luković, Miloljub D.
AU  - Pavlović, Vera P.
AU  - Vujančević, Jelena
AU  - Radovanović, Milan
AU  - Krstić, Jugoslav
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2018
AB  - Pseudobrookite based nanopowder was obtained by solid state synthesis of starting hematite and anatase nanopowders in the weight ratio 55:45. Structural and morphological properties were analyzed using X-ray diffraction (XRD), BET, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, UV/Vis diffuse reflectance spectroscopy, Field emission scanning electron microscopy (FESEM) and Transmission electron microscopy (TEM) confirming the formation of nanocrystalline pseudobrookite. The obtained powder was mixed with a binder (ethyl cellulose), dispersant (α-terpinol) and adhesion agents (acetic acid and distilled water) to obtain a thick film paste. It was screen printed on alumina substrate with interdigitated PdAg electrodes and fired at 600 °C for 30 min. Formation of a porous nanocrystalline thick film structure was shown using Scanning electron microscopy (SEM), while Hall measurements enabled determination of carrier mobility. Change of impedance response in the frequency range 42 Hz–1 MHz with humidity was analyzed at room temperature (25 °C) and 50 °C in the relative humidity range 30–90% and 40–90%, respectively. At 42 Hz, and room temperature the impedance reduced ∼28 times, while at 50 °C it reduced ∼147 times in the relative humidity range 40–90%. The sensor showed rapid response (16 s) and relatively low hysteresis (8.39% at 25 °C and 2.64% at 50 °C) showing that this is a promising material for application in humidity sensing.
PB  - Elsevier
T2  - Sensors and Actuators B: Chemical
T1  - Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films
SP  - 654
EP  - 664
VL  - 277
DO  - 10.1016/j.snb.2018.09.063
UR  - https://hdl.handle.net/21.15107/rcub_dais_4605
ER  - 
@article{
author = "Nikolić, Maria Vesna and Vasiljević, Zorka Ž. and Luković, Miloljub D. and Pavlović, Vera P. and Vujančević, Jelena and Radovanović, Milan and Krstić, Jugoslav and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2018",
abstract = "Pseudobrookite based nanopowder was obtained by solid state synthesis of starting hematite and anatase nanopowders in the weight ratio 55:45. Structural and morphological properties were analyzed using X-ray diffraction (XRD), BET, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, UV/Vis diffuse reflectance spectroscopy, Field emission scanning electron microscopy (FESEM) and Transmission electron microscopy (TEM) confirming the formation of nanocrystalline pseudobrookite. The obtained powder was mixed with a binder (ethyl cellulose), dispersant (α-terpinol) and adhesion agents (acetic acid and distilled water) to obtain a thick film paste. It was screen printed on alumina substrate with interdigitated PdAg electrodes and fired at 600 °C for 30 min. Formation of a porous nanocrystalline thick film structure was shown using Scanning electron microscopy (SEM), while Hall measurements enabled determination of carrier mobility. Change of impedance response in the frequency range 42 Hz–1 MHz with humidity was analyzed at room temperature (25 °C) and 50 °C in the relative humidity range 30–90% and 40–90%, respectively. At 42 Hz, and room temperature the impedance reduced ∼28 times, while at 50 °C it reduced ∼147 times in the relative humidity range 40–90%. The sensor showed rapid response (16 s) and relatively low hysteresis (8.39% at 25 °C and 2.64% at 50 °C) showing that this is a promising material for application in humidity sensing.",
publisher = "Elsevier",
journal = "Sensors and Actuators B: Chemical",
title = "Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films",
pages = "654-664",
volume = "277",
doi = "10.1016/j.snb.2018.09.063",
url = "https://hdl.handle.net/21.15107/rcub_dais_4605"
}
Nikolić, M. V., Vasiljević, Z. Ž., Luković, M. D., Pavlović, V. P., Vujančević, J., Radovanović, M., Krstić, J., Vlahović, B.,& Pavlović, V. B. (2018). Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films.
Sensors and Actuators B: Chemical
Elsevier., 277, 654-664.
https://doi.org/10.1016/j.snb.2018.09.063
Nikolić MV, Vasiljević ZŽ, Luković MD, Pavlović VP, Vujančević J, Radovanović M, Krstić J, Vlahović B, Pavlović VB. Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films. Sensors and Actuators B: Chemical. 2018;277:654-664.
doi:10.1016/j.snb.2018.09.063.
Nikolić Maria Vesna, Vasiljević Zorka Ž., Luković Miloljub D., Pavlović Vera P., Vujančević Jelena, Radovanović Milan, Krstić Jugoslav, Vlahović Branislav, Pavlović Vladimir B., "Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films" Sensors and Actuators B: Chemical, 277 (2018):654-664,
https://doi.org/10.1016/j.snb.2018.09.063 .
21
16
17

Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films

Peleš, Adriana; Aleksić, Obrad S.; Pavlović, Vera P.; Đoković, Vladimir; Dojčilović, Radovan; Nikolić, Z.; Marinković, F.; Mitrić, Miodrag; Blagojević, Vladimir A.; Vlahović, Branislav; Pavlović, Vladimir B.

(IOP Publishing, 2018)

TY  - JOUR
AU  - Peleš, Adriana
AU  - Aleksić, Obrad S.
AU  - Pavlović, Vera P.
AU  - Đoković, Vladimir
AU  - Dojčilović, Radovan
AU  - Nikolić, Z.
AU  - Marinković, F.
AU  - Mitrić, Miodrag
AU  - Blagojević, Vladimir A.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2018
AB  - The influence of the mechanical activation of ZnO nanoparticle fillers on the structural and electrical properties of the matrix of poly(vinylidenefluoride)-ZnO (PVDF-ZnO) films was investigated. Transmission electron microscopy and scanning electron microscopy analyses showed that mechanical activation in a high energy planetary ball mill reduces the size of ZnO particles. X-ray diffraction and Raman spectroscopy revealed that PVDF crystallized predominantly as the γ-phase. Non-activated ZnO filler reduces the degree of the crystallinity of the matrix and promotes crystallization of α-phase of PVDF in the film, while the fillers activated for 5 and 10 min induce crystallization of β-phase, indicating that mechanical activation of the filler can be used as a general method for fabrication of PVDF composites with increased content of piezoelectric β-phase crystals. Dielectric spectroscopy measurements show that polymer composite with the high content of β-phase (with ZnO filler activated for 5 min) exhibits the highest value of dielectric permittivity in 150-400 K range of temperatures. Kinetic analysis shows combined effects of increased surface area and increased concentration of surface defects on the interactions between polymer chains and activated nanoparticles. © 2018 IOP Publishing Ltd.
PB  - IOP Publishing
T2  - Physica Scripta
T1  - Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films
SP  - 105801
VL  - 93
DO  - 10.1088/1402-4896/aad749
UR  - https://hdl.handle.net/21.15107/rcub_dais_4079
ER  - 
@article{
author = "Peleš, Adriana and Aleksić, Obrad S. and Pavlović, Vera P. and Đoković, Vladimir and Dojčilović, Radovan and Nikolić, Z. and Marinković, F. and Mitrić, Miodrag and Blagojević, Vladimir A. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2018",
abstract = "The influence of the mechanical activation of ZnO nanoparticle fillers on the structural and electrical properties of the matrix of poly(vinylidenefluoride)-ZnO (PVDF-ZnO) films was investigated. Transmission electron microscopy and scanning electron microscopy analyses showed that mechanical activation in a high energy planetary ball mill reduces the size of ZnO particles. X-ray diffraction and Raman spectroscopy revealed that PVDF crystallized predominantly as the γ-phase. Non-activated ZnO filler reduces the degree of the crystallinity of the matrix and promotes crystallization of α-phase of PVDF in the film, while the fillers activated for 5 and 10 min induce crystallization of β-phase, indicating that mechanical activation of the filler can be used as a general method for fabrication of PVDF composites with increased content of piezoelectric β-phase crystals. Dielectric spectroscopy measurements show that polymer composite with the high content of β-phase (with ZnO filler activated for 5 min) exhibits the highest value of dielectric permittivity in 150-400 K range of temperatures. Kinetic analysis shows combined effects of increased surface area and increased concentration of surface defects on the interactions between polymer chains and activated nanoparticles. © 2018 IOP Publishing Ltd.",
publisher = "IOP Publishing",
journal = "Physica Scripta",
title = "Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films",
pages = "105801",
volume = "93",
doi = "10.1088/1402-4896/aad749",
url = "https://hdl.handle.net/21.15107/rcub_dais_4079"
}
Peleš, A., Aleksić, O. S., Pavlović, V. P., Đoković, V., Dojčilović, R., Nikolić, Z., Marinković, F., Mitrić, M., Blagojević, V. A., Vlahović, B.,& Pavlović, V. B. (2018). Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films.
Physica Scripta
IOP Publishing., 93, 105801.
https://doi.org/10.1088/1402-4896/aad749
Peleš A, Aleksić OS, Pavlović VP, Đoković V, Dojčilović R, Nikolić Z, Marinković F, Mitrić M, Blagojević VA, Vlahović B, Pavlović VB. Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films. Physica Scripta. 2018;93:105801.
doi:10.1088/1402-4896/aad749.
Peleš Adriana, Aleksić Obrad S., Pavlović Vera P., Đoković Vladimir, Dojčilović Radovan, Nikolić Z., Marinković F., Mitrić Miodrag, Blagojević Vladimir A., Vlahović Branislav, Pavlović Vladimir B., "Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films" Physica Scripta, 93 (2018):105801,
https://doi.org/10.1088/1402-4896/aad749 .
1
9
4
8

Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples

Ivanović, Marija; Mladenović, Nataša; Gulicovski, Jelena; Pavlović, Vladimir B.; Pavlović, Vera P.; Kljajević, Ljiljana M.; Nenadović, Snežana S.

(Belgrade : Serbian Ceramic Society, 2018)

TY  - CONF
AU  - Ivanović, Marija
AU  - Mladenović, Nataša
AU  - Gulicovski, Jelena
AU  - Pavlović, Vladimir B.
AU  - Pavlović, Vera P.
AU  - Kljajević, Ljiljana M.
AU  - Nenadović, Snežana S.
PY  - 2018
AB  - Considering geopolymers as inorganic polymers, they are actually amorphous network of interlinked silicate and aluminate groups, so they could be prospective ceramic precursors for materials with defined dimensions obtained by casting and firing, but not from powder processing. In this research, the starting material is metakaolin, which was obtained by calcining domes tic kaolinite clay. Initially, four series of alkaline activators of NaOH and sodium silicate have been used. Activators present the mixtures of Na2SiO3 and solutions of NaOH, of different molarities 2M, 4M, 6M and 8M. The prepared geopolymer slurries were cast into the designated near shape at room temperature and after that at 60oC. In fact, the post-synthesis curing process (28 days) has an important role in the obtaining good characteristics of geopolymers. Densities, viscosities and refractive index of alkaline activators were determined over the temperature range 15-60oC of process of geopolymerizations. Based on the obtained results of investigated parameters have been selected to predict the properties of materials. All geopolymer samples were characterized by XRD, FTIR, SEM/EDS analysis and Raman spectroscopy providing complementary and valuable information of the investigated materials. This route of ceramics production has advantages associated with producing an environmental friendly, energy saving, clean new technology of geopolymer materials.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018
T1  - Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples
SP  - 73
EP  - 74
UR  - https://hdl.handle.net/21.15107/rcub_dais_4116
ER  - 
@conference{
author = "Ivanović, Marija and Mladenović, Nataša and Gulicovski, Jelena and Pavlović, Vladimir B. and Pavlović, Vera P. and Kljajević, Ljiljana M. and Nenadović, Snežana S.",
year = "2018",
abstract = "Considering geopolymers as inorganic polymers, they are actually amorphous network of interlinked silicate and aluminate groups, so they could be prospective ceramic precursors for materials with defined dimensions obtained by casting and firing, but not from powder processing. In this research, the starting material is metakaolin, which was obtained by calcining domes tic kaolinite clay. Initially, four series of alkaline activators of NaOH and sodium silicate have been used. Activators present the mixtures of Na2SiO3 and solutions of NaOH, of different molarities 2M, 4M, 6M and 8M. The prepared geopolymer slurries were cast into the designated near shape at room temperature and after that at 60oC. In fact, the post-synthesis curing process (28 days) has an important role in the obtaining good characteristics of geopolymers. Densities, viscosities and refractive index of alkaline activators were determined over the temperature range 15-60oC of process of geopolymerizations. Based on the obtained results of investigated parameters have been selected to predict the properties of materials. All geopolymer samples were characterized by XRD, FTIR, SEM/EDS analysis and Raman spectroscopy providing complementary and valuable information of the investigated materials. This route of ceramics production has advantages associated with producing an environmental friendly, energy saving, clean new technology of geopolymer materials.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018",
title = "Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples",
pages = "73-74",
url = "https://hdl.handle.net/21.15107/rcub_dais_4116"
}
Ivanović, M., Mladenović, N., Gulicovski, J., Pavlović, V. B., Pavlović, V. P., Kljajević, L. M.,& Nenadović, S. S. (2018). Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples.
Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018
Belgrade : Serbian Ceramic Society., 73-74.
Ivanović M, Mladenović N, Gulicovski J, Pavlović VB, Pavlović VP, Kljajević LM, Nenadović SS. Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples. Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018. 2018;:73-74.
Ivanović Marija, Mladenović Nataša, Gulicovski Jelena, Pavlović Vladimir B., Pavlović Vera P., Kljajević Ljiljana M., Nenadović Snežana S., "Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples" Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018 (2018):73-74