Pavlović, Vladimir B.

Link to this page

Authority KeyName Variants
orcid::0000-0002-1138-0331
  • Pavlović, Vladimir B. (234)
  • Pavlović, Vladimir B (2)
Projects
Directed synthesis, structure and properties of multifunctional materials United States National Aeronautics and Space Administration (NASA), Grant NNX09AV07A
United States National Science Foundation (NSF) / Centers of Research Excellence in Science and Technology (CREST), Grant HRD-0833184 Investigation of the relation in triad: Synthesis structure-properties for functional materials
United States National Science Foundation (NSF) / Partnerships for Research and Education in Materials (PREM), Grant 1523617 Development and application of multifunctional materials using domestic raw materials in upgraded processing lines
Synthesis, processing and characterization of nanostructured materials for application in the field of energy, mechanical engineering, environmental protection and biomedicine Zero- to Three-Dimensional Nanostructures for Application in Electronics and Renewable Energy Sources: Synthesis, Characterization and Processing
Lithium-ion batteries and fuel cells - research and development Synthesis, processing and applications of nanostructured multifunctional materials with defined properties
Size-, shape- and structure- dependent properties of nanoparticles and nanocomposites Molecular designing of nanoparticles with controlled morphological and physicochemical characteristics and functional materials based on them
Functional, Functionalized and Advanced Nanomaterials Ministry of Education, Youth and Sports (MEYS) of Czech Republic - CEITEC 2020 [LQ1601]
Serbian Academy of Sciences and Arts, Project F-198 Bilateral cooperation between Serbia and France, No. 4510339/2016/09/03 “Inteligent econanomaterials and nanocomposites”
Grant Agency of the Czech Republic, Project 15-06390S Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200175 (Institute of Technical Sciences of SASA, Belgrade)
Materials of Reduced Dimensions for Efficient Light Harvesting and Energy conversion National Science Foundation, North Carolina State University, Project No. HRD-1345219
Czech Science Foundation (GACR) - 17-05620S Investigation of intermetallics and semiconductors and possible application in renewable energy sources
Investigation of the effect of parameters of synthesis and processing on dielectric, optical and magnetic properties, both bulk and surface of crystal and polymeric systems Geologic and ecotoxicologic research in identification of geopathogen zones of toxic elements in drinking water reservoirs- research into methods and procedures for reduction of biochemical anomalies
Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200026 (University of Belgrade, Institute of Chemistry, Technology and Metallurgy - IChTM) Algorithms and software for frequency-domain and time-domain simulations of RF subsystems and electromagnetic sensors in ICT
Serbian Academy of Sciences and Arts, Project F-178 COST Action CM1302 - European Network on Smart Inorganic Polymers (SIPs)
EU Operational Programme Competitiveness and Cohesion European Structural and Investment Funds (2014-2020), “Modification of cheese ripening process and development of whey based products - SIRENA”

Author's Bibliography

The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods

Šuljagić, Marija; Vulić, Predrag; Jeremić, Dejan; Pavlović, Vladimir B.; Filipović, Suzana; Kilanski, Lukasz; Lewinska, Sabina; Slawska-Waniewska, Anna; Milenković, Milica; Nikolić, Aleksandar S.; Anđelković, Ljubica

(Elsevier, 2021)

TY  - JOUR
AU  - Šuljagić, Marija
AU  - Vulić, Predrag
AU  - Jeremić, Dejan
AU  - Pavlović, Vladimir B.
AU  - Filipović, Suzana
AU  - Kilanski, Lukasz
AU  - Lewinska, Sabina
AU  - Slawska-Waniewska, Anna
AU  - Milenković, Milica
AU  - Nikolić, Aleksandar S.
AU  - Anđelković, Ljubica
PY  - 2021
AB  - To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.
PB  - Elsevier
T2  - Materials Research Bulletin
T1  - The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods
SP  - 111117
VL  - 134
DO  - 10.1016/j.materresbull.2020.111117
UR  - https://hdl.handle.net/21.15107/rcub_dais_9514
ER  - 
@article{
author = "Šuljagić, Marija and Vulić, Predrag and Jeremić, Dejan and Pavlović, Vladimir B. and Filipović, Suzana and Kilanski, Lukasz and Lewinska, Sabina and Slawska-Waniewska, Anna and Milenković, Milica and Nikolić, Aleksandar S. and Anđelković, Ljubica",
year = "2021",
abstract = "To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.",
publisher = "Elsevier",
journal = "Materials Research Bulletin",
title = "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods",
pages = "111117",
volume = "134",
doi = "10.1016/j.materresbull.2020.111117",
url = "https://hdl.handle.net/21.15107/rcub_dais_9514"
}
Šuljagić, M., Vulić, P., Jeremić, D., Pavlović, V. B., Filipović, S., Kilanski, L., Lewinska, S., Slawska-Waniewska, A., Milenković, M., Nikolić, A. S.,& Anđelković, L. (2021). The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods.
Materials Research Bulletin
Elsevier., 134, 111117.
https://doi.org/10.1016/j.materresbull.2020.111117
Šuljagić M, Vulić P, Jeremić D, Pavlović VB, Filipović S, Kilanski L, Lewinska S, Slawska-Waniewska A, Milenković M, Nikolić AS, Anđelković L. The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. Materials Research Bulletin. 2021;134:111117.
doi:10.1016/j.materresbull.2020.111117.
Šuljagić Marija, Vulić Predrag, Jeremić Dejan, Pavlović Vladimir B., Filipović Suzana, Kilanski Lukasz, Lewinska Sabina, Slawska-Waniewska Anna, Milenković Milica, Nikolić Aleksandar S., Anđelković Ljubica, "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods" Materials Research Bulletin, 134 (2021):111117,
https://doi.org/10.1016/j.materresbull.2020.111117 .
2
1
2

PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix

Pavlović, Vera P.; Tošić, Dragana; Dojčilović, Radovan; Dudić, Duško; Dramićanin, Miroslav D.; Medić, Mina; McPherson, Michael M.; Pavlović, Vladimir B.; Vlahović, Branislav; Đoković, Vladimir

(Elsevier BV, 2021)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Tošić, Dragana
AU  - Dojčilović, Radovan
AU  - Dudić, Duško
AU  - Dramićanin, Miroslav D.
AU  - Medić, Mina
AU  - McPherson, Michael M.
AU  - Pavlović, Vladimir B.
AU  - Vlahović, Branislav
AU  - Đoković, Vladimir
PY  - 2021
AB  - Na0.25K0.25Bi0.5TiO3 (NKBT) perovskite particles are synthesized by solid-state method and used as a filler for polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) co-polymer. X-ray diffraction analysis of NKBT powders shows that the particles have a rhombohedral perovskite crystal structure (R3c symmetry). Raman spectroscopy reveals that the co-polymer crystallizes predominantly into the mixture of polar β- and γ-crystals, while there is also a contribution of the non-polar α-crystal phase. The introduction of the NKBT into the PVDF-HFP results with an increase in effective dielectric permittivity and this effect depends on the inorganic content in the composite. The most interesting result of the present study is that the introduction of NKBT particles induces the appearance of an additional transition peak in the dielectric spectra of the co-polymer matrix. At the fixed frequency of ~2 kHz, the observed process appears at ~10 °C (about 45° above the glass transition temperature) and its magnitude strongly depends on the amount of the NKBT in the composite. Dielectric spectroscopy measurements of the composites are carried out in the wide range of frequencies (from 0.1 Hz to 1 MHz) and temperatures (from −100 to 100 °C). They reveal that the novel process can be clearly distinguished in the frequency range between 160 Hz and ~50 kHz.
PB  - Elsevier BV
T2  - Polymer Testing
T1  - PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix
SP  - 107093
VL  - 96
DO  - 10.1016/j.polymertesting.2021.107093
UR  - https://hdl.handle.net/21.15107/rcub_dais_10535
ER  - 
@article{
author = "Pavlović, Vera P. and Tošić, Dragana and Dojčilović, Radovan and Dudić, Duško and Dramićanin, Miroslav D. and Medić, Mina and McPherson, Michael M. and Pavlović, Vladimir B. and Vlahović, Branislav and Đoković, Vladimir",
year = "2021",
abstract = "Na0.25K0.25Bi0.5TiO3 (NKBT) perovskite particles are synthesized by solid-state method and used as a filler for polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) co-polymer. X-ray diffraction analysis of NKBT powders shows that the particles have a rhombohedral perovskite crystal structure (R3c symmetry). Raman spectroscopy reveals that the co-polymer crystallizes predominantly into the mixture of polar β- and γ-crystals, while there is also a contribution of the non-polar α-crystal phase. The introduction of the NKBT into the PVDF-HFP results with an increase in effective dielectric permittivity and this effect depends on the inorganic content in the composite. The most interesting result of the present study is that the introduction of NKBT particles induces the appearance of an additional transition peak in the dielectric spectra of the co-polymer matrix. At the fixed frequency of ~2 kHz, the observed process appears at ~10 °C (about 45° above the glass transition temperature) and its magnitude strongly depends on the amount of the NKBT in the composite. Dielectric spectroscopy measurements of the composites are carried out in the wide range of frequencies (from 0.1 Hz to 1 MHz) and temperatures (from −100 to 100 °C). They reveal that the novel process can be clearly distinguished in the frequency range between 160 Hz and ~50 kHz.",
publisher = "Elsevier BV",
journal = "Polymer Testing",
title = "PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix",
pages = "107093",
volume = "96",
doi = "10.1016/j.polymertesting.2021.107093",
url = "https://hdl.handle.net/21.15107/rcub_dais_10535"
}
Pavlović, V. P., Tošić, D., Dojčilović, R., Dudić, D., Dramićanin, M. D., Medić, M., McPherson, M. M., Pavlović, V. B., Vlahović, B.,& Đoković, V. (2021). PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix.
Polymer Testing
Elsevier BV., 96, 107093.
https://doi.org/10.1016/j.polymertesting.2021.107093
Pavlović VP, Tošić D, Dojčilović R, Dudić D, Dramićanin MD, Medić M, McPherson MM, Pavlović VB, Vlahović B, Đoković V. PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix. Polymer Testing. 2021;96:107093.
doi:10.1016/j.polymertesting.2021.107093.
Pavlović Vera P., Tošić Dragana, Dojčilović Radovan, Dudić Duško, Dramićanin Miroslav D., Medić Mina, McPherson Michael M., Pavlović Vladimir B., Vlahović Branislav, Đoković Vladimir, "PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix" Polymer Testing, 96 (2021):107093,
https://doi.org/10.1016/j.polymertesting.2021.107093 .
1
1

The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods

Šuljagić, Marija; Vulić, Predrag; Jeremić, Dejan; Pavlović, Vladimir B.; Filipović, Suzana; Kilanski, Lukasz; Lewinska, Sabina; Slawska-Waniewska, Anna; Milenković, Milica; Nikolić, Aleksandar S.; Anđelković, Ljubica

(Elsevier, 2021)

TY  - JOUR
AU  - Šuljagić, Marija
AU  - Vulić, Predrag
AU  - Jeremić, Dejan
AU  - Pavlović, Vladimir B.
AU  - Filipović, Suzana
AU  - Kilanski, Lukasz
AU  - Lewinska, Sabina
AU  - Slawska-Waniewska, Anna
AU  - Milenković, Milica
AU  - Nikolić, Aleksandar S.
AU  - Anđelković, Ljubica
PY  - 2021
AB  - To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.
PB  - Elsevier
T2  - Materials Research Bulletin
T1  - The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods
SP  - 111117
VL  - 134
DO  - 10.1016/j.materresbull.2020.111117
UR  - https://hdl.handle.net/21.15107/rcub_dais_9515
ER  - 
@article{
author = "Šuljagić, Marija and Vulić, Predrag and Jeremić, Dejan and Pavlović, Vladimir B. and Filipović, Suzana and Kilanski, Lukasz and Lewinska, Sabina and Slawska-Waniewska, Anna and Milenković, Milica and Nikolić, Aleksandar S. and Anđelković, Ljubica",
year = "2021",
abstract = "To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.",
publisher = "Elsevier",
journal = "Materials Research Bulletin",
title = "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods",
pages = "111117",
volume = "134",
doi = "10.1016/j.materresbull.2020.111117",
url = "https://hdl.handle.net/21.15107/rcub_dais_9515"
}
Šuljagić, M., Vulić, P., Jeremić, D., Pavlović, V. B., Filipović, S., Kilanski, L., Lewinska, S., Slawska-Waniewska, A., Milenković, M., Nikolić, A. S.,& Anđelković, L. (2021). The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods.
Materials Research Bulletin
Elsevier., 134, 111117.
https://doi.org/10.1016/j.materresbull.2020.111117
Šuljagić M, Vulić P, Jeremić D, Pavlović VB, Filipović S, Kilanski L, Lewinska S, Slawska-Waniewska A, Milenković M, Nikolić AS, Anđelković L. The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. Materials Research Bulletin. 2021;134:111117.
doi:10.1016/j.materresbull.2020.111117.
Šuljagić Marija, Vulić Predrag, Jeremić Dejan, Pavlović Vladimir B., Filipović Suzana, Kilanski Lukasz, Lewinska Sabina, Slawska-Waniewska Anna, Milenković Milica, Nikolić Aleksandar S., Anđelković Ljubica, "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods" Materials Research Bulletin, 134 (2021):111117,
https://doi.org/10.1016/j.materresbull.2020.111117 .
2
1
2

Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction

Filipović, Suzana; Obradović, Nina; Anđelković, Ljubica; Olćan, Dragan; Petrović, Jovana; Mirković, Miljana; Pavlović, Vladimir B.; Jeremić, Dejan; Vlahović, Branislav; Đorđević, Antonije

(Belgrade : International Institute for the Science of Sintering, 2021)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Anđelković, Ljubica
AU  - Olćan, Dragan
AU  - Petrović, Jovana
AU  - Mirković, Miljana
AU  - Pavlović, Vladimir B.
AU  - Jeremić, Dejan
AU  - Vlahović, Branislav
AU  - Đorđević, Antonije
PY  - 2021
AB  - Solid-state reaction between BaTiO3 and Fe2O3 was used to produce a multiferroic heterostructure composite. Commercial BaTiO3 and Fe(NO3)3•9H2O were suspended in ethanol for 30 minutes in an ultrasound bath. The prepared mixture was thermally processed at 300 oC for 6 h. Sintering at 1300 oC for 1 h resulted in a mixture of different phases, BaTiO3, BaFe12O19 and Ba12Ti28Fe15O84, which were confirmed by x-ray powder diffraction. A dense microstructure with a small volume fraction of closed porosity was indicated by the scanning electron microscopy, while a homogeneous distribution of Fe ions over BaTiO3 phase was visible from energy dispersive spectroscopy mapping. Doping of BaTiO3 with Fe2O3 resulted in formation of magnetic hexaferrite phases, as confirmed by dielectric measurements that showed a broadened maximum of the permittivity measured as a function of temperature.
PB  - Belgrade : International Institute for the Science of Sintering
T2  - Science of Sintering
T1  - Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction
SP  - 1
EP  - 8
VL  - 53
DO  - 10.2298/SOS2101001F
UR  - https://hdl.handle.net/21.15107/rcub_dais_11230
ER  - 
@article{
author = "Filipović, Suzana and Obradović, Nina and Anđelković, Ljubica and Olćan, Dragan and Petrović, Jovana and Mirković, Miljana and Pavlović, Vladimir B. and Jeremić, Dejan and Vlahović, Branislav and Đorđević, Antonije",
year = "2021",
abstract = "Solid-state reaction between BaTiO3 and Fe2O3 was used to produce a multiferroic heterostructure composite. Commercial BaTiO3 and Fe(NO3)3•9H2O were suspended in ethanol for 30 minutes in an ultrasound bath. The prepared mixture was thermally processed at 300 oC for 6 h. Sintering at 1300 oC for 1 h resulted in a mixture of different phases, BaTiO3, BaFe12O19 and Ba12Ti28Fe15O84, which were confirmed by x-ray powder diffraction. A dense microstructure with a small volume fraction of closed porosity was indicated by the scanning electron microscopy, while a homogeneous distribution of Fe ions over BaTiO3 phase was visible from energy dispersive spectroscopy mapping. Doping of BaTiO3 with Fe2O3 resulted in formation of magnetic hexaferrite phases, as confirmed by dielectric measurements that showed a broadened maximum of the permittivity measured as a function of temperature.",
publisher = "Belgrade : International Institute for the Science of Sintering",
journal = "Science of Sintering",
title = "Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction",
pages = "1-8",
volume = "53",
doi = "10.2298/SOS2101001F",
url = "https://hdl.handle.net/21.15107/rcub_dais_11230"
}
Filipović, S., Obradović, N., Anđelković, L., Olćan, D., Petrović, J., Mirković, M., Pavlović, V. B., Jeremić, D., Vlahović, B.,& Đorđević, A. (2021). Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction.
Science of Sintering
Belgrade : International Institute for the Science of Sintering., 53, 1-8.
https://doi.org/10.2298/SOS2101001F
Filipović S, Obradović N, Anđelković L, Olćan D, Petrović J, Mirković M, Pavlović VB, Jeremić D, Vlahović B, Đorđević A. Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction. Science of Sintering. 2021;53:1-8.
doi:10.2298/SOS2101001F.
Filipović Suzana, Obradović Nina, Anđelković Ljubica, Olćan Dragan, Petrović Jovana, Mirković Miljana, Pavlović Vladimir B., Jeremić Dejan, Vlahović Branislav, Đorđević Antonije, "Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction" Science of Sintering, 53 (2021):1-8,
https://doi.org/10.2298/SOS2101001F .

Freeze versus Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material

Jovanović, Aleksandra A.; Lević, Steva; Pavlović, Vladimir B.; Marković, Smilja; Pjanović, Rada; Đorđević, Verica B.; Nedović, Viktor; Bugarski, Branko

(2021)


                                            

                                            
Jovanović, A. A., Lević, S., Pavlović, V. B., Marković, S., Pjanović, R., Đorđević, V. B., Nedović, V.,& Bugarski, B. (2021). Freeze versus Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material.
Preprints.
https://doi.org/10.20944/preprints202105.0358.v1
Jovanović AA, Lević S, Pavlović VB, Marković S, Pjanović R, Đorđević VB, Nedović V, Bugarski B. Freeze versus Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material. Preprints. 2021;.
doi:10.20944/preprints202105.0358.v1.
Jovanović Aleksandra A., Lević Steva, Pavlović Vladimir B., Marković Smilja, Pjanović Rada, Đorđević Verica B., Nedović Viktor, Bugarski Branko, "Freeze versus Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material" Preprints (2021),
https://doi.org/10.20944/preprints202105.0358.v1 .
1

High Heat Treatment of Goat Cheese Milk. The Effect on Sensory Profile, Consumer Acceptance and Microstructure of Cheese

Miloradović, Zorana; Tomić, Nikola; Kljajević, Nemanja; Lević, Steva; Pavlović, Vladimir B.; Blažić, Marijana; Miočinović, Jelena

(Basel : MDPI AG, 2021)

TY  - JOUR
AU  - Miloradović, Zorana
AU  - Tomić, Nikola
AU  - Kljajević, Nemanja
AU  - Lević, Steva
AU  - Pavlović, Vladimir B.
AU  - Blažić, Marijana
AU  - Miočinović, Jelena
PY  - 2021
AB  - Goat cheeses from high heat treated milk (HHTM: 80 °C/5 min (E1) and 90 °C/5 min (E2)), could be regarded as new products, compared to their analogues made from commonly pasteurized milk (65 °C/30 min (C)). Descriptive analysis and consumer tests with a hedonic scale and JAR scale were part of the product development process. The use of scanning electron microscopy enabled deeper insight into the flavor and texture of the cheeses. In all cheese variants, goaty flavor was mildly pronounced. Young HHTM cheeses also had a pronounced whey and cooked/milky flavor. Consumers found such flavor ‘too intensive’. Unlike the control variant, HHTM cheeses were not described as ‘too hard’. Such improvement in texture was found to be a result of fine, highly branched microstructure, sustained over the course of ripening time and highly incorporated milk fat globules inside the cheese mass. Cluster analysis showed that the largest group of consumers (47.5%) preferred E2 cheese. Although consumers found that most of the cheeses were ‘too salty’, this excess did not decrease their overall acceptance. Neither microstructure analysis nor descriptive sensory analysis of goat white brined cheeses produced from high heat treated milk has been done before.
PB  - Basel : MDPI AG
T2  - Foods
T1  - High Heat Treatment of Goat Cheese Milk. The Effect on Sensory Profile, Consumer Acceptance and Microstructure of Cheese
SP  - 1116
VL  - 10
IS  - 5
DO  - 10.3390/foods10051116
UR  - https://hdl.handle.net/21.15107/rcub_dais_11644
ER  - 
@article{
author = "Miloradović, Zorana and Tomić, Nikola and Kljajević, Nemanja and Lević, Steva and Pavlović, Vladimir B. and Blažić, Marijana and Miočinović, Jelena",
year = "2021",
abstract = "Goat cheeses from high heat treated milk (HHTM: 80 °C/5 min (E1) and 90 °C/5 min (E2)), could be regarded as new products, compared to their analogues made from commonly pasteurized milk (65 °C/30 min (C)). Descriptive analysis and consumer tests with a hedonic scale and JAR scale were part of the product development process. The use of scanning electron microscopy enabled deeper insight into the flavor and texture of the cheeses. In all cheese variants, goaty flavor was mildly pronounced. Young HHTM cheeses also had a pronounced whey and cooked/milky flavor. Consumers found such flavor ‘too intensive’. Unlike the control variant, HHTM cheeses were not described as ‘too hard’. Such improvement in texture was found to be a result of fine, highly branched microstructure, sustained over the course of ripening time and highly incorporated milk fat globules inside the cheese mass. Cluster analysis showed that the largest group of consumers (47.5%) preferred E2 cheese. Although consumers found that most of the cheeses were ‘too salty’, this excess did not decrease their overall acceptance. Neither microstructure analysis nor descriptive sensory analysis of goat white brined cheeses produced from high heat treated milk has been done before.",
publisher = "Basel : MDPI AG",
journal = "Foods",
title = "High Heat Treatment of Goat Cheese Milk. The Effect on Sensory Profile, Consumer Acceptance and Microstructure of Cheese",
pages = "1116",
volume = "10",
number = "5",
doi = "10.3390/foods10051116",
url = "https://hdl.handle.net/21.15107/rcub_dais_11644"
}
Miloradović, Z., Tomić, N., Kljajević, N., Lević, S., Pavlović, V. B., Blažić, M.,& Miočinović, J. (2021). High Heat Treatment of Goat Cheese Milk. The Effect on Sensory Profile, Consumer Acceptance and Microstructure of Cheese.
Foods
Basel : MDPI AG., 10(5), 1116.
https://doi.org/10.3390/foods10051116
Miloradović Z, Tomić N, Kljajević N, Lević S, Pavlović VB, Blažić M, Miočinović J. High Heat Treatment of Goat Cheese Milk. The Effect on Sensory Profile, Consumer Acceptance and Microstructure of Cheese. Foods. 2021;10(5):1116.
doi:10.3390/foods10051116.
Miloradović Zorana, Tomić Nikola, Kljajević Nemanja, Lević Steva, Pavlović Vladimir B., Blažić Marijana, Miočinović Jelena, "High Heat Treatment of Goat Cheese Milk. The Effect on Sensory Profile, Consumer Acceptance and Microstructure of Cheese" Foods, 10, no. 5 (2021):1116,
https://doi.org/10.3390/foods10051116 .

Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Marković, Smilja; Blagojević, Vladimir A.; Lević, Steva; Savić, Slobodan; Đorđević, Antonije; Pavlović, Vladimir B.

(Springer, 2020)

TY  - JOUR
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Marković, Smilja
AU  - Blagojević, Vladimir A.
AU  - Lević, Steva
AU  - Savić, Slobodan
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2020
AB  - Solid-state mechanical activation of MgO and α-Al2O3 powders was used to produce MgAl2O4. The cation site occupancy in the resulting MgAl2O4 spinel was investigated using different methods. Differential thermal analysis and thermal gravimetry showed that mechanical activation reduced the spinel formation temperature by around 200 °C, and the corresponding activation energy by about 25%. In addition, characteristic temperatures for evaporation of physisorbed water and decomposition of Mg(OH)2 shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of the sintering temperature for all of the sintered specimens, indicating that the breaking point for ordering of the crystal structure was around 1500 °C for non-activated samples, and 1400 °C for activated samples.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics
SP  - 95
EP  - 107
VL  - 140
DO  - 10.1007/s10973-019-08846-w
UR  - https://hdl.handle.net/21.15107/rcub_dais_10027
ER  - 
@article{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Marković, Smilja and Blagojević, Vladimir A. and Lević, Steva and Savić, Slobodan and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2020",
abstract = "Solid-state mechanical activation of MgO and α-Al2O3 powders was used to produce MgAl2O4. The cation site occupancy in the resulting MgAl2O4 spinel was investigated using different methods. Differential thermal analysis and thermal gravimetry showed that mechanical activation reduced the spinel formation temperature by around 200 °C, and the corresponding activation energy by about 25%. In addition, characteristic temperatures for evaporation of physisorbed water and decomposition of Mg(OH)2 shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of the sintering temperature for all of the sintered specimens, indicating that the breaking point for ordering of the crystal structure was around 1500 °C for non-activated samples, and 1400 °C for activated samples.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics",
pages = "95-107",
volume = "140",
doi = "10.1007/s10973-019-08846-w",
url = "https://hdl.handle.net/21.15107/rcub_dais_10027"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Marković, S., Blagojević, V. A., Lević, S., Savić, S., Đorđević, A.,& Pavlović, V. B. (2020). Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics.
Journal of Thermal Analysis and Calorimetry
Springer., 140, 95-107.
https://doi.org/10.1007/s10973-019-08846-w
Obradović N, Fahrenholtz WG, Filipović S, Marković S, Blagojević VA, Lević S, Savić S, Đorđević A, Pavlović VB. Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics. Journal of Thermal Analysis and Calorimetry. 2020;140:95-107.
doi:10.1007/s10973-019-08846-w.
Obradović Nina, Fahrenholtz William G., Filipović Suzana, Marković Smilja, Blagojević Vladimir A., Lević Steva, Savić Slobodan, Đorđević Antonije, Pavlović Vladimir B., "Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics" Journal of Thermal Analysis and Calorimetry, 140 (2020):95-107,
https://doi.org/10.1007/s10973-019-08846-w .
1
2
2

Synthesis, characterization and in vitro evaluation of divalent ion release from stable NiFe2O4, ZnFe2O4 and core-shell ZnFe2O4@NiFe2O4 nanoparticles

Anđelković, Ljubica; Jeremić, Dejan; Milenković, Milica R.; Radosavljević, Jelena; Vulić, Predrag; Pavlović, Vladimir B.; Manojlović, Dragan D.; Nikolić, Aleksandar S.

(Elsevier, 2020)

TY  - JOUR
AU  - Anđelković, Ljubica
AU  - Jeremić, Dejan
AU  - Milenković, Milica R.
AU  - Radosavljević, Jelena
AU  - Vulić, Predrag
AU  - Pavlović, Vladimir B.
AU  - Manojlović, Dragan D.
AU  - Nikolić, Aleksandar S.
PY  - 2020
AB  - A simple organic-phase synthesis process was used to produce bare NiFe2O4 and ZnFe2O4 and core-shell ZnFe2O4@NiFe2O4 ferrite nanoparticles. X-ray powder diffractograms for all investigated powders show characteristic peaks of a spinel cubic structure without a secondary phase. Transmission electron microscopy (TEM) indicated the presence of nanoparticles that are smaller than 20 nm. The release of divalent ions (Ni2+ and Zn2+) from synthesized nanoparticles that were dispersed in saline solution, phosphate-buffered saline (PBS) and human serum, as determined by the inductively coupled plasma mass spectrometry (ICP-MS) method, was lower than 2 wt %. These results demonstrate the stability of the investigated nanoparticles in biologically relevant media and exclude the toxicity of Ni2+ and Zn2+ due to metal ion release, thereby opening a broad range of (bio)medical applications.
PB  - Elsevier
T2  - Ceramics International
T1  - Synthesis, characterization and in vitro evaluation of divalent ion release from stable NiFe2O4, ZnFe2O4 and core-shell ZnFe2O4@NiFe2O4 nanoparticles
SP  - 3528
EP  - 3533
VL  - 46
IS  - 3
DO  - 10.1016/j.ceramint.2019.10.068
UR  - https://hdl.handle.net/21.15107/rcub_dais_6901
ER  - 
@article{
author = "Anđelković, Ljubica and Jeremić, Dejan and Milenković, Milica R. and Radosavljević, Jelena and Vulić, Predrag and Pavlović, Vladimir B. and Manojlović, Dragan D. and Nikolić, Aleksandar S.",
year = "2020",
abstract = "A simple organic-phase synthesis process was used to produce bare NiFe2O4 and ZnFe2O4 and core-shell ZnFe2O4@NiFe2O4 ferrite nanoparticles. X-ray powder diffractograms for all investigated powders show characteristic peaks of a spinel cubic structure without a secondary phase. Transmission electron microscopy (TEM) indicated the presence of nanoparticles that are smaller than 20 nm. The release of divalent ions (Ni2+ and Zn2+) from synthesized nanoparticles that were dispersed in saline solution, phosphate-buffered saline (PBS) and human serum, as determined by the inductively coupled plasma mass spectrometry (ICP-MS) method, was lower than 2 wt %. These results demonstrate the stability of the investigated nanoparticles in biologically relevant media and exclude the toxicity of Ni2+ and Zn2+ due to metal ion release, thereby opening a broad range of (bio)medical applications.",
publisher = "Elsevier",
journal = "Ceramics International",
title = "Synthesis, characterization and in vitro evaluation of divalent ion release from stable NiFe2O4, ZnFe2O4 and core-shell ZnFe2O4@NiFe2O4 nanoparticles",
pages = "3528-3533",
volume = "46",
number = "3",
doi = "10.1016/j.ceramint.2019.10.068",
url = "https://hdl.handle.net/21.15107/rcub_dais_6901"
}
Anđelković, L., Jeremić, D., Milenković, M. R., Radosavljević, J., Vulić, P., Pavlović, V. B., Manojlović, D. D.,& Nikolić, A. S. (2020). Synthesis, characterization and in vitro evaluation of divalent ion release from stable NiFe2O4, ZnFe2O4 and core-shell ZnFe2O4@NiFe2O4 nanoparticles.
Ceramics International
Elsevier., 46(3), 3528-3533.
https://doi.org/10.1016/j.ceramint.2019.10.068
Anđelković L, Jeremić D, Milenković MR, Radosavljević J, Vulić P, Pavlović VB, Manojlović DD, Nikolić AS. Synthesis, characterization and in vitro evaluation of divalent ion release from stable NiFe2O4, ZnFe2O4 and core-shell ZnFe2O4@NiFe2O4 nanoparticles. Ceramics International. 2020;46(3):3528-3533.
doi:10.1016/j.ceramint.2019.10.068.
Anđelković Ljubica, Jeremić Dejan, Milenković Milica R., Radosavljević Jelena, Vulić Predrag, Pavlović Vladimir B., Manojlović Dragan D., Nikolić Aleksandar S., "Synthesis, characterization and in vitro evaluation of divalent ion release from stable NiFe2O4, ZnFe2O4 and core-shell ZnFe2O4@NiFe2O4 nanoparticles" Ceramics International, 46, no. 3 (2020):3528-3533,
https://doi.org/10.1016/j.ceramint.2019.10.068 .
6
3
6

Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Marković, Smilja; Blagojević, Vladimir A.; Lević, Steva; Savić, Slobodan; Đorđević, Antonije; Pavlović, Vladimir B.

(Springer, 2020)

TY  - JOUR
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Marković, Smilja
AU  - Blagojević, Vladimir A.
AU  - Lević, Steva
AU  - Savić, Slobodan
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2020
AB  - Solid-state mechanical activation of MgO and α-Al2O3 powders was used to produce MgAl2O4. The cation site occupancy in the resulting MgAl2O4 spinel was investigated using different methods. Differential thermal analysis and thermal gravimetry showed that mechanical activation reduced the spinel formation temperature by around 200 °C, and the corresponding activation energy by about 25%. In addition, characteristic temperatures for evaporation of physisorbed water and decomposition of Mg(OH)2 shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of the sintering temperature for all of the sintered specimens, indicating that the breaking point for ordering of the crystal structure was around 1500 °C for non-activated samples, and 1400 °C for activated samples.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics
SP  - 95
EP  - 107
VL  - 140
DO  - 10.1007/s10973-019-08846-w
UR  - https://hdl.handle.net/21.15107/rcub_dais_6910
ER  - 
@article{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Marković, Smilja and Blagojević, Vladimir A. and Lević, Steva and Savić, Slobodan and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2020",
abstract = "Solid-state mechanical activation of MgO and α-Al2O3 powders was used to produce MgAl2O4. The cation site occupancy in the resulting MgAl2O4 spinel was investigated using different methods. Differential thermal analysis and thermal gravimetry showed that mechanical activation reduced the spinel formation temperature by around 200 °C, and the corresponding activation energy by about 25%. In addition, characteristic temperatures for evaporation of physisorbed water and decomposition of Mg(OH)2 shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of the sintering temperature for all of the sintered specimens, indicating that the breaking point for ordering of the crystal structure was around 1500 °C for non-activated samples, and 1400 °C for activated samples.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics",
pages = "95-107",
volume = "140",
doi = "10.1007/s10973-019-08846-w",
url = "https://hdl.handle.net/21.15107/rcub_dais_6910"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Marković, S., Blagojević, V. A., Lević, S., Savić, S., Đorđević, A.,& Pavlović, V. B. (2020). Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics.
Journal of Thermal Analysis and Calorimetry
Springer., 140, 95-107.
https://doi.org/10.1007/s10973-019-08846-w
Obradović N, Fahrenholtz WG, Filipović S, Marković S, Blagojević VA, Lević S, Savić S, Đorđević A, Pavlović VB. Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics. Journal of Thermal Analysis and Calorimetry. 2020;140:95-107.
doi:10.1007/s10973-019-08846-w.
Obradović Nina, Fahrenholtz William G., Filipović Suzana, Marković Smilja, Blagojević Vladimir A., Lević Steva, Savić Slobodan, Đorđević Antonije, Pavlović Vladimir B., "Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics" Journal of Thermal Analysis and Calorimetry, 140 (2020):95-107,
https://doi.org/10.1007/s10973-019-08846-w .
1
2
2

Rheology and Microstructures of Rennet Gels from Differently Heated Goat Milk

Miloradović, Zorana; Kljajević, Nemanja; Miočinović, Jelena; Lević, Steva; Pavlović, Vladimir B.; Blažić, Marijana; Puđa, Predrag

(Basel : MDPI, 2020)

TY  - JOUR
AU  - Miloradović, Zorana
AU  - Kljajević, Nemanja
AU  - Miočinović, Jelena
AU  - Lević, Steva
AU  - Pavlović, Vladimir B.
AU  - Blažić, Marijana
AU  - Puđa, Predrag
PY  - 2020
AB  - Rennet coagulation of goat milk heated to 65 °C/30 min (Gc), 80 °C/5 min (G8) and 90 °C/5 min (G9) was studied. A rheometer equipped with a vane geometry tool was used to measure milk coagulation parameters and viscoelastic properties of rennet gels. Yield parameters: curd yield, laboratory curd yield and curd yield efficiency were measured and calculated. Scanning electron microscopy of rennet gels was conducted. Storage moduli (G’) of gels at the moment of cutting were 19.9 ± 1.71 Pa (Gc), 11.9 ± 1.96 Pa (G8) and 7.3 ± 1.46 Pa (G9). Aggregation rate and curd firmness decreased with the increase of milk heating temperature, while coagulation time did not change significantly. High heat treatment of goat milk had a significant effect on both laboratory curd yield and curd yield. However, laboratory curd yield (27.7 ± 1.84%) of the G9 treatment was unreasonably high compared to curd yield (15.4 ± 0.60%). The microstructure of G9 was notably different compared to Gc and G8, with a denser and more compact microstructure, smaller paracasein micelles and void spaces in a form of cracks indicating weaker cross links. The findings of this study might serve as the bases for the development of different cheese types produced from high-heat-treated goat milk.
PB  - Basel : MDPI
T2  - Foods
T1  - Rheology and Microstructures of Rennet Gels from Differently Heated Goat Milk
SP  - 283
VL  - 9
IS  - 3
DO  - 10.3390/foods9030283
UR  - https://hdl.handle.net/21.15107/rcub_dais_8955
ER  - 
@article{
author = "Miloradović, Zorana and Kljajević, Nemanja and Miočinović, Jelena and Lević, Steva and Pavlović, Vladimir B. and Blažić, Marijana and Puđa, Predrag",
year = "2020",
abstract = "Rennet coagulation of goat milk heated to 65 °C/30 min (Gc), 80 °C/5 min (G8) and 90 °C/5 min (G9) was studied. A rheometer equipped with a vane geometry tool was used to measure milk coagulation parameters and viscoelastic properties of rennet gels. Yield parameters: curd yield, laboratory curd yield and curd yield efficiency were measured and calculated. Scanning electron microscopy of rennet gels was conducted. Storage moduli (G’) of gels at the moment of cutting were 19.9 ± 1.71 Pa (Gc), 11.9 ± 1.96 Pa (G8) and 7.3 ± 1.46 Pa (G9). Aggregation rate and curd firmness decreased with the increase of milk heating temperature, while coagulation time did not change significantly. High heat treatment of goat milk had a significant effect on both laboratory curd yield and curd yield. However, laboratory curd yield (27.7 ± 1.84%) of the G9 treatment was unreasonably high compared to curd yield (15.4 ± 0.60%). The microstructure of G9 was notably different compared to Gc and G8, with a denser and more compact microstructure, smaller paracasein micelles and void spaces in a form of cracks indicating weaker cross links. The findings of this study might serve as the bases for the development of different cheese types produced from high-heat-treated goat milk.",
publisher = "Basel : MDPI",
journal = "Foods",
title = "Rheology and Microstructures of Rennet Gels from Differently Heated Goat Milk",
pages = "283",
volume = "9",
number = "3",
doi = "10.3390/foods9030283",
url = "https://hdl.handle.net/21.15107/rcub_dais_8955"
}
Miloradović, Z., Kljajević, N., Miočinović, J., Lević, S., Pavlović, V. B., Blažić, M.,& Puđa, P. (2020). Rheology and Microstructures of Rennet Gels from Differently Heated Goat Milk.
Foods
Basel : MDPI., 9(3), 283.
https://doi.org/10.3390/foods9030283
Miloradović Z, Kljajević N, Miočinović J, Lević S, Pavlović VB, Blažić M, Puđa P. Rheology and Microstructures of Rennet Gels from Differently Heated Goat Milk. Foods. 2020;9(3):283.
doi:10.3390/foods9030283.
Miloradović Zorana, Kljajević Nemanja, Miočinović Jelena, Lević Steva, Pavlović Vladimir B., Blažić Marijana, Puđa Predrag, "Rheology and Microstructures of Rennet Gels from Differently Heated Goat Milk" Foods, 9, no. 3 (2020):283,
https://doi.org/10.3390/foods9030283 .
2
2

Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis

Filipović, Suzana; Anđelković, Ljubica; Jeremić, Dejan; Vulić, Predrag; Nikolić, Aleksandar; Marković, Smilja; Paunović, Vesna; Lević, Steva; Pavlović, Vladimir B.

(Belgrade : ETRAN, 2020)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Anđelković, Ljubica
AU  - Jeremić, Dejan
AU  - Vulić, Predrag
AU  - Nikolić, Aleksandar
AU  - Marković, Smilja
AU  - Paunović, Vesna
AU  - Lević, Steva
AU  - Pavlović, Vladimir B.
PY  - 2020
AB  - Barium titanate (BaTiO3) attracts high scientific and technological attention due to good dielectric and electromechanical properties. Although BaTiO3 is one of the most frequently investigated ferroelectric materials, the need for finding new and/or improved synthesis methods of this material still exists. In this paper, a novel, mild synthesis route for producing tetragonal BaTiO3 from barium nitrate and Ti-oxalate precursor is presented. Morphology of the prepared and subsequently sintered BaTiO3 was determined by SEM. Particle size distribution of the as prepared powder was monitored by the laser diffraction. The phase composition, structure and lattice dynamics were investigated by XRD and Raman spectroscopy. Finally, dielectric parameters were determined in the temperature range from 30 to 180 degrees C, and within a variety of frequencies. Curie temperature was detected at 130 degrees C.
PB  - Belgrade : ETRAN
T2  - Science of Sintering
T1  - Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis
SP  - 257
EP  - 268
VL  - 52
DO  - 10.2298/SOS2003257F
UR  - https://hdl.handle.net/21.15107/rcub_dais_9449
ER  - 
@article{
author = "Filipović, Suzana and Anđelković, Ljubica and Jeremić, Dejan and Vulić, Predrag and Nikolić, Aleksandar and Marković, Smilja and Paunović, Vesna and Lević, Steva and Pavlović, Vladimir B.",
year = "2020",
abstract = "Barium titanate (BaTiO3) attracts high scientific and technological attention due to good dielectric and electromechanical properties. Although BaTiO3 is one of the most frequently investigated ferroelectric materials, the need for finding new and/or improved synthesis methods of this material still exists. In this paper, a novel, mild synthesis route for producing tetragonal BaTiO3 from barium nitrate and Ti-oxalate precursor is presented. Morphology of the prepared and subsequently sintered BaTiO3 was determined by SEM. Particle size distribution of the as prepared powder was monitored by the laser diffraction. The phase composition, structure and lattice dynamics were investigated by XRD and Raman spectroscopy. Finally, dielectric parameters were determined in the temperature range from 30 to 180 degrees C, and within a variety of frequencies. Curie temperature was detected at 130 degrees C.",
publisher = "Belgrade : ETRAN",
journal = "Science of Sintering",
title = "Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis",
pages = "257-268",
volume = "52",
doi = "10.2298/SOS2003257F",
url = "https://hdl.handle.net/21.15107/rcub_dais_9449"
}
Filipović, S., Anđelković, L., Jeremić, D., Vulić, P., Nikolić, A., Marković, S., Paunović, V., Lević, S.,& Pavlović, V. B. (2020). Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis.
Science of Sintering
Belgrade : ETRAN., 52, 257-268.
https://doi.org/10.2298/SOS2003257F
Filipović S, Anđelković L, Jeremić D, Vulić P, Nikolić A, Marković S, Paunović V, Lević S, Pavlović VB. Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis. Science of Sintering. 2020;52:257-268.
doi:10.2298/SOS2003257F.
Filipović Suzana, Anđelković Ljubica, Jeremić Dejan, Vulić Predrag, Nikolić Aleksandar, Marković Smilja, Paunović Vesna, Lević Steva, Pavlović Vladimir B., "Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis" Science of Sintering, 52 (2020):257-268,
https://doi.org/10.2298/SOS2003257F .

Effects of Mechanical Activation on the Formation and Sintering Kinetics of Barium Strontium Titanate Ceramics

Kosanović, Darko; Labus, Nebojša; Živojinović, Jelena; Peleš Tadić, Adriana; Blagojević, Vladimir A.; Pavlović, Vladimir B.

(Belgrade : ETRAN, 2020)

TY  - JOUR
AU  - Kosanović, Darko
AU  - Labus, Nebojša
AU  - Živojinović, Jelena
AU  - Peleš Tadić, Adriana
AU  - Blagojević, Vladimir A.
AU  - Pavlović, Vladimir B.
PY  - 2020
AB  - The influence of mechanical activation on the formation, sintering kinetics and morphology was investigated in sintered barium strontium titanate (BST) ceramics with different Ba-to-Sr ratios. Initial powders were mechanically activated for 20 and 120 min, leading to mechano-chemical reaction and formation of BaxSr1-xTiO3 phases. Agglomeration was found to represent an important factor in the process of formation of BaxSr1-xTiO3 phases around 800 oC and during sintering. It reduces the effectiveness of mechanical activation on formation of BaxSr1-xTiO3 phases beyond the short period (20 min), while in the process of sintering, prolonged mechanical activation (120 min) leads to a significant reduction in sintering temperature and the corresponding value of activation energy. In addition, all three systems show a phase transformation around 1100 oC, attributed to the hexagonal-to-cubic phase transition. Morphology of the final sintered ceramics can be correlated primarily with the state of the pre-sintered powder, where mechanically activated powders with smaller particle size produced more compact and less porous final product.
PB  - Belgrade : ETRAN
T2  - Science of Sintering
T1  - Effects of Mechanical Activation on the Formation and Sintering Kinetics of Barium Strontium Titanate Ceramics
SP  - 371
EP  - 385
VL  - 52
IS  - 4
DO  - 10.2298/SOS2004371K
UR  - https://hdl.handle.net/21.15107/rcub_dais_10039
ER  - 
@article{
author = "Kosanović, Darko and Labus, Nebojša and Živojinović, Jelena and Peleš Tadić, Adriana and Blagojević, Vladimir A. and Pavlović, Vladimir B.",
year = "2020",
abstract = "The influence of mechanical activation on the formation, sintering kinetics and morphology was investigated in sintered barium strontium titanate (BST) ceramics with different Ba-to-Sr ratios. Initial powders were mechanically activated for 20 and 120 min, leading to mechano-chemical reaction and formation of BaxSr1-xTiO3 phases. Agglomeration was found to represent an important factor in the process of formation of BaxSr1-xTiO3 phases around 800 oC and during sintering. It reduces the effectiveness of mechanical activation on formation of BaxSr1-xTiO3 phases beyond the short period (20 min), while in the process of sintering, prolonged mechanical activation (120 min) leads to a significant reduction in sintering temperature and the corresponding value of activation energy. In addition, all three systems show a phase transformation around 1100 oC, attributed to the hexagonal-to-cubic phase transition. Morphology of the final sintered ceramics can be correlated primarily with the state of the pre-sintered powder, where mechanically activated powders with smaller particle size produced more compact and less porous final product.",
publisher = "Belgrade : ETRAN",
journal = "Science of Sintering",
title = "Effects of Mechanical Activation on the Formation and Sintering Kinetics of Barium Strontium Titanate Ceramics",
pages = "371-385",
volume = "52",
number = "4",
doi = "10.2298/SOS2004371K",
url = "https://hdl.handle.net/21.15107/rcub_dais_10039"
}
Kosanović, D., Labus, N., Živojinović, J., Peleš Tadić, A., Blagojević, V. A.,& Pavlović, V. B. (2020). Effects of Mechanical Activation on the Formation and Sintering Kinetics of Barium Strontium Titanate Ceramics.
Science of Sintering
Belgrade : ETRAN., 52(4), 371-385.
https://doi.org/10.2298/SOS2004371K
Kosanović D, Labus N, Živojinović J, Peleš Tadić A, Blagojević VA, Pavlović VB. Effects of Mechanical Activation on the Formation and Sintering Kinetics of Barium Strontium Titanate Ceramics. Science of Sintering. 2020;52(4):371-385.
doi:10.2298/SOS2004371K.
Kosanović Darko, Labus Nebojša, Živojinović Jelena, Peleš Tadić Adriana, Blagojević Vladimir A., Pavlović Vladimir B., "Effects of Mechanical Activation on the Formation and Sintering Kinetics of Barium Strontium Titanate Ceramics" Science of Sintering, 52, no. 4 (2020):371-385,
https://doi.org/10.2298/SOS2004371K .

Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal

Obradović, Nina; Rusmirović, Jelena; Filipović, Suzana; Kosanović, Darko; Marinković, Aleksandar; Radić, Danka; Pavlović, Vladimir B.

(Desalination Publications, 2020)

TY  - JOUR
AU  - Obradović, Nina
AU  - Rusmirović, Jelena
AU  - Filipović, Suzana
AU  - Kosanović, Darko
AU  - Marinković, Aleksandar
AU  - Radić, Danka
AU  - Pavlović, Vladimir B.
PY  - 2020
AB  - Industrial/technological growth is directly connected with environmental pollution, but its influence can be minimized through pollution abatement approaches such as the treatment of industrial wastewater. In this study, novel porous amine-functionalized silicate minerals, specifically, cordierite was investigated for the removal of toxic heavy metals from industrial wastewaters. Cordierite supports were synthesized by mixing MgO, Al2O3 , and SiO2 powders in 2:2:5 molar ratios, and mechanically activated via ball milling in ethanol for 10, 40, or 80 min. Pellets were sintered by heating in air at 20°C min-1 to 1,350°C, for 2 h. Porous supports were produced by coarsely crushing the sintered pellets and mixing the crushed and sieved cordierite powder with 20 wt.% of a pore-forming agent, either nanocellulose or yeast. The resulting pellets were sintered by heating at 5°C min-1 to 700°C in air. The synthetic cordierite support was modified by treatment in poly-ethylenimine. Activated supports were then tested for the removal of Ni2+ and Cd2+ ions. The phase composition of the cordierite supports was analyzed by the X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Analysis of adsorption isotherms, kinetics, and thermodynamic parameters indicated that adsorption was a spontaneous, endothermic process with a maximum adsorption capacity of 36 mg g-1 for Cd2+ and 43 mg g-1 for Ni2+. This work has shed light on the mechanism of heavy metal removal from the aquatic medium using the novel hybrid functionalized cordierite-based ceramic.
PB  - Desalination Publications
T2  - Desalination and Water Treatment
T1  - Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal
SP  - 283
EP  - 296
VL  - 192
DO  - 10.5004/dwt.2020.25736
UR  - https://hdl.handle.net/21.15107/rcub_dais_10040
ER  - 
@article{
author = "Obradović, Nina and Rusmirović, Jelena and Filipović, Suzana and Kosanović, Darko and Marinković, Aleksandar and Radić, Danka and Pavlović, Vladimir B.",
year = "2020",
abstract = "Industrial/technological growth is directly connected with environmental pollution, but its influence can be minimized through pollution abatement approaches such as the treatment of industrial wastewater. In this study, novel porous amine-functionalized silicate minerals, specifically, cordierite was investigated for the removal of toxic heavy metals from industrial wastewaters. Cordierite supports were synthesized by mixing MgO, Al2O3 , and SiO2 powders in 2:2:5 molar ratios, and mechanically activated via ball milling in ethanol for 10, 40, or 80 min. Pellets were sintered by heating in air at 20°C min-1 to 1,350°C, for 2 h. Porous supports were produced by coarsely crushing the sintered pellets and mixing the crushed and sieved cordierite powder with 20 wt.% of a pore-forming agent, either nanocellulose or yeast. The resulting pellets were sintered by heating at 5°C min-1 to 700°C in air. The synthetic cordierite support was modified by treatment in poly-ethylenimine. Activated supports were then tested for the removal of Ni2+ and Cd2+ ions. The phase composition of the cordierite supports was analyzed by the X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Analysis of adsorption isotherms, kinetics, and thermodynamic parameters indicated that adsorption was a spontaneous, endothermic process with a maximum adsorption capacity of 36 mg g-1 for Cd2+ and 43 mg g-1 for Ni2+. This work has shed light on the mechanism of heavy metal removal from the aquatic medium using the novel hybrid functionalized cordierite-based ceramic.",
publisher = "Desalination Publications",
journal = "Desalination and Water Treatment",
title = "Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal",
pages = "283-296",
volume = "192",
doi = "10.5004/dwt.2020.25736",
url = "https://hdl.handle.net/21.15107/rcub_dais_10040"
}
Obradović, N., Rusmirović, J., Filipović, S., Kosanović, D., Marinković, A., Radić, D.,& Pavlović, V. B. (2020). Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal.
Desalination and Water Treatment
Desalination Publications., 192, 283-296.
https://doi.org/10.5004/dwt.2020.25736
Obradović N, Rusmirović J, Filipović S, Kosanović D, Marinković A, Radić D, Pavlović VB. Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal. Desalination and Water Treatment. 2020;192:283-296.
doi:10.5004/dwt.2020.25736.
Obradović Nina, Rusmirović Jelena, Filipović Suzana, Kosanović Darko, Marinković Aleksandar, Radić Danka, Pavlović Vladimir B., "Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal" Desalination and Water Treatment, 192 (2020):283-296,
https://doi.org/10.5004/dwt.2020.25736 .

Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0

Rusmirović, Jelena; Obradović, Nina; Perendija, Jovana; Umićević, Ana; Kapidžić, Ana; Vlahović, Branislav; Pavlović, Vera P.; Marinković, Aleksandar D.; Pavlović, Vladimir B.

(Springer, 2019)

TY  - BOOK
AU  - Rusmirović, Jelena
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera P.
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
PB  - Springer
T2  - Environmental Science and Pollution Research
T1  - Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0
UR  - https://hdl.handle.net/21.15107/rcub_dais_5805
ER  - 
@book{
author = "Rusmirović, Jelena and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera P. and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
publisher = "Springer",
journal = "Environmental Science and Pollution Research",
title = "Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0",
url = "https://hdl.handle.net/21.15107/rcub_dais_5805"
}
Rusmirović, J., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V. P., Marinković, A. D.,& Pavlović, V. B. (2019). Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0.
Environmental Science and Pollution Research
Springer..
Rusmirović J, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović VP, Marinković AD, Pavlović VB. Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0. Environmental Science and Pollution Research. 2019;.
Rusmirović Jelena, Obradović Nina, Perendija Jovana, Umićević Ana, Kapidžić Ana, Vlahović Branislav, Pavlović Vera P., Marinković Aleksandar D., Pavlović Vladimir B., "Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0" Environmental Science and Pollution Research (2019)

Kinetics of thermally activated processes in cordierite-based ceramics

Obradović, Nina; Blagojević, Vladimir A.; Filipović, Suzana; Đorđević, Nataša; Kosanović, Darko; Marković, Smilja; Kachlik, Martin; Maca, Karel; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Blagojević, Vladimir A.
AU  - Filipović, Suzana
AU  - Đorđević, Nataša
AU  - Kosanović, Darko
AU  - Marković, Smilja
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Kinetics of thermally activated processes in cordierite-based ceramics
SP  - 2989
EP  - 2998
VL  - 138
DO  - 10.1007/s10973-018-7924-1
UR  - https://hdl.handle.net/21.15107/rcub_dais_7048
ER  - 
@article{
author = "Obradović, Nina and Blagojević, Vladimir A. and Filipović, Suzana and Đorđević, Nataša and Kosanović, Darko and Marković, Smilja and Kachlik, Martin and Maca, Karel and Pavlović, Vladimir B.",
year = "2019",
abstract = "Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Kinetics of thermally activated processes in cordierite-based ceramics",
pages = "2989-2998",
volume = "138",
doi = "10.1007/s10973-018-7924-1",
url = "https://hdl.handle.net/21.15107/rcub_dais_7048"
}
Obradović, N., Blagojević, V. A., Filipović, S., Đorđević, N., Kosanović, D., Marković, S., Kachlik, M., Maca, K.,& Pavlović, V. B. (2019). Kinetics of thermally activated processes in cordierite-based ceramics.
Journal of Thermal Analysis and Calorimetry
Springer., 138, 2989-2998.
https://doi.org/10.1007/s10973-018-7924-1
Obradović N, Blagojević VA, Filipović S, Đorđević N, Kosanović D, Marković S, Kachlik M, Maca K, Pavlović VB. Kinetics of thermally activated processes in cordierite-based ceramics. Journal of Thermal Analysis and Calorimetry. 2019;138:2989-2998.
doi:10.1007/s10973-018-7924-1.
Obradović Nina, Blagojević Vladimir A., Filipović Suzana, Đorđević Nataša, Kosanović Darko, Marković Smilja, Kachlik Martin, Maca Karel, Pavlović Vladimir B., "Kinetics of thermally activated processes in cordierite-based ceramics" Journal of Thermal Analysis and Calorimetry, 138 (2019):2989-2998,
https://doi.org/10.1007/s10973-018-7924-1 .
2
1
1

Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing

Nikolić, Maria Vesna; Vasiljević, Zorka Ž.; Luković, Miloljub D.; Pavlović, Vera P.; Krstić, Jugoslav B.; Vujančević, Jelena; Tadić, Nenad B.; Vlahović, Branislav; Pavlović, Vladimir B.

(John Wiley & Sons, Inc., 2019)

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Vasiljević, Zorka Ž.
AU  - Luković, Miloljub D.
AU  - Pavlović, Vera P.
AU  - Krstić, Jugoslav B.
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.
PB  - John Wiley & Sons, Inc.
T2  - International Journal of Applied Ceramic Technology
T1  - Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing
SP  - 981
EP  - 993
VL  - 16
IS  - 3
DO  - 10.1111/ijac.13190
UR  - https://hdl.handle.net/21.15107/rcub_dais_5766
ER  - 
@article{
author = "Nikolić, Maria Vesna and Vasiljević, Zorka Ž. and Luković, Miloljub D. and Pavlović, Vera P. and Krstić, Jugoslav B. and Vujančević, Jelena and Tadić, Nenad B. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.",
publisher = "John Wiley & Sons, Inc.",
journal = "International Journal of Applied Ceramic Technology",
title = "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing",
pages = "981-993",
volume = "16",
number = "3",
doi = "10.1111/ijac.13190",
url = "https://hdl.handle.net/21.15107/rcub_dais_5766"
}
Nikolić, M. V., Vasiljević, Z. Ž., Luković, M. D., Pavlović, V. P., Krstić, J. B., Vujančević, J., Tadić, N. B., Vlahović, B.,& Pavlović, V. B. (2019). Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing.
International Journal of Applied Ceramic Technology
John Wiley & Sons, Inc.., 16(3), 981-993.
https://doi.org/10.1111/ijac.13190
Nikolić MV, Vasiljević ZŽ, Luković MD, Pavlović VP, Krstić JB, Vujančević J, Tadić NB, Vlahović B, Pavlović VB. Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing. International Journal of Applied Ceramic Technology. 2019;16(3):981-993.
doi:10.1111/ijac.13190.
Nikolić Maria Vesna, Vasiljević Zorka Ž., Luković Miloljub D., Pavlović Vera P., Krstić Jugoslav B., Vujančević Jelena, Tadić Nenad B., Vlahović Branislav, Pavlović Vladimir B., "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing" International Journal of Applied Ceramic Technology, 16, no. 3 (2019):981-993,
https://doi.org/10.1111/ijac.13190 .
13
9
12

Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal

Rusmirović, Jelena; Obradović, Nina; Perendija, Jovana; Umićević, Ana; Kapidžić, Ana; Vlahović, Branislav; Pavlović, Vera P.; Marinković, Aleksandar D.; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Rusmirović, Jelena
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera P.
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.
PB  - Springer
T2  - Environmental Science and Pollution Research
T1  - Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
SP  - 12379
EP  - 12398
VL  - 26
IS  - 12
DO  - 10.1007/s11356-019-04625-0
UR  - https://hdl.handle.net/21.15107/rcub_dais_5764
ER  - 
@article{
author = "Rusmirović, Jelena and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera P. and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
abstract = "Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.",
publisher = "Springer",
journal = "Environmental Science and Pollution Research",
title = "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal",
pages = "12379-12398",
volume = "26",
number = "12",
doi = "10.1007/s11356-019-04625-0",
url = "https://hdl.handle.net/21.15107/rcub_dais_5764"
}
Rusmirović, J., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V. P., Marinković, A. D.,& Pavlović, V. B. (2019). Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal.
Environmental Science and Pollution Research
Springer., 26(12), 12379-12398.
https://doi.org/10.1007/s11356-019-04625-0
Rusmirović J, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović VP, Marinković AD, Pavlović VB. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environmental Science and Pollution Research. 2019;26(12):12379-12398.
doi:10.1007/s11356-019-04625-0.
Rusmirović Jelena, Obradović Nina, Perendija Jovana, Umićević Ana, Kapidžić Ana, Vlahović Branislav, Pavlović Vera P., Marinković Aleksandar D., Pavlović Vladimir B., "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal" Environmental Science and Pollution Research, 26, no. 12 (2019):12379-12398,
https://doi.org/10.1007/s11356-019-04625-0 .
1
4
6
6

The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Kosanović, Darko; Dapčević, A.; Đorđević, Antonije; Balać, Igor; Pavlović, Vladimir B.

(Elsevier, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Kosanović, Darko
AU  - Dapčević, A.
AU  - Đorđević, Antonije
AU  - Balać, Igor
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Magnesium aluminate, MgAl2O4 and other alumina-based spinels are ceramics with high hardness, high melting point and mechanical strenght. Spinels can also be used as dielectrics in microwave applications. The goal of this study was to examine the effects of mechanical activation and sintering temperatures on physico-chemical properties of spinel. MgAl2O4 was produced by solid state reaction between MgO and α-Al2O3. The starting powders were mixed by ball milling to homogenize without significant particle size reduction. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 1 h. Powders were compacted at 300 MPa. Heat treatments were performed in air, at temperatures ranging from 1200 to 1600 °C with 2 h dwell time, to determine the amount of spinel formation as a function of temperature. Phase composition and microstructure of initial powders and heated samples were determined by means of X-ray diffraction, particle size analysis, and scanning electron microscopy. The influences of milling and consolidation parameters were studied by electrical measurements and mechanical characterization. The main conclusion of this study was that mechanical activation for 60 min initiated a mechano-chemical reaction, resulted in spinel formation at much lower temperatures than within non-activated powders, and indicated that final sintering stage started at much lower temperatures for activated powders. Changes in microstructure parameters, as a consequence of mechanical treatment and subsequent heating of investigated powder mixtures, strongly affect electrical and mechanical properties of the final ceramics.
PB  - Elsevier
T2  - Ceramics International
T1  - The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics
SP  - 12015
EP  - 12021
VL  - 45
IS  - 9
DO  - 10.1016/j.ceramint.2019.03.095
UR  - https://hdl.handle.net/21.15107/rcub_dais_5763
ER  - 
@article{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Kosanović, Darko and Dapčević, A. and Đorđević, Antonije and Balać, Igor and Pavlović, Vladimir B.",
year = "2019",
abstract = "Magnesium aluminate, MgAl2O4 and other alumina-based spinels are ceramics with high hardness, high melting point and mechanical strenght. Spinels can also be used as dielectrics in microwave applications. The goal of this study was to examine the effects of mechanical activation and sintering temperatures on physico-chemical properties of spinel. MgAl2O4 was produced by solid state reaction between MgO and α-Al2O3. The starting powders were mixed by ball milling to homogenize without significant particle size reduction. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 1 h. Powders were compacted at 300 MPa. Heat treatments were performed in air, at temperatures ranging from 1200 to 1600 °C with 2 h dwell time, to determine the amount of spinel formation as a function of temperature. Phase composition and microstructure of initial powders and heated samples were determined by means of X-ray diffraction, particle size analysis, and scanning electron microscopy. The influences of milling and consolidation parameters were studied by electrical measurements and mechanical characterization. The main conclusion of this study was that mechanical activation for 60 min initiated a mechano-chemical reaction, resulted in spinel formation at much lower temperatures than within non-activated powders, and indicated that final sintering stage started at much lower temperatures for activated powders. Changes in microstructure parameters, as a consequence of mechanical treatment and subsequent heating of investigated powder mixtures, strongly affect electrical and mechanical properties of the final ceramics.",
publisher = "Elsevier",
journal = "Ceramics International",
title = "The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics",
pages = "12015-12021",
volume = "45",
number = "9",
doi = "10.1016/j.ceramint.2019.03.095",
url = "https://hdl.handle.net/21.15107/rcub_dais_5763"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Kosanović, D., Dapčević, A., Đorđević, A., Balać, I.,& Pavlović, V. B. (2019). The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics.
Ceramics International
Elsevier., 45(9), 12015-12021.
https://doi.org/10.1016/j.ceramint.2019.03.095
Obradović N, Fahrenholtz WG, Filipović S, Kosanović D, Dapčević A, Đorđević A, Balać I, Pavlović VB. The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics. Ceramics International. 2019;45(9):12015-12021.
doi:10.1016/j.ceramint.2019.03.095.
Obradović Nina, Fahrenholtz William G., Filipović Suzana, Kosanović Darko, Dapčević A., Đorđević Antonije, Balać Igor, Pavlović Vladimir B., "The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics" Ceramics International, 45, no. 9 (2019):12015-12021,
https://doi.org/10.1016/j.ceramint.2019.03.095 .
8
8
6

Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics

Terzić, Anja; Obradović, Nina; Kosanović, Darko; Stojanović, Jovica; Đorđević, Antonije; Andrić, Ljubiša; Pavlović, Vladimir B.

(Elsevier, 2019)

TY  - JOUR
AU  - Terzić, Anja
AU  - Obradović, Nina
AU  - Kosanović, Darko
AU  - Stojanović, Jovica
AU  - Đorđević, Antonije
AU  - Andrić, Ljubiša
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Steatite, as ceramic with composition predominantly resting on magnesium silicate, was produced from economic resources – talc, aluminosilicate clays, and either BaCO3 or feldspar as flux. Titanium dioxide was a doping agent. Four steatite mixtures were mechanically activated in a planetary ball mill for 30, 45 or 60 min, prior to the thermal treatment. Two-step sintering with initial phase set at 1350 °C and holding period conducted at 1250 °C was applied to initiate diffusion and prevent grain growth. Thereby, a high density ceramic material with low-porous submicron structure was acquired. The effects of TiO2 addition on densification, microstructure, and dielectric characteristics of steatites were monitored. The thermal stability of green mixtures was tested by differential thermal and thermogravimetric analyses. Changes in crystallinity and mineral phase composition were observed by the X-ray diffraction technique. Microstructural visualization with spatial arrangements of individual chemical elements on surface of the sintered ceramics was acquired by scanning electron microscopy accompanied with EDS mapping. In order to test the possibility of employment of the obtained steatites in insulation materials, electrical measurements were conducted by recording variations of the dielectric constant and loss tangent as a function of alternations in the mix-design and the mechanical activation period.
PB  - Elsevier
T2  - Ceramics International
T1  - Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics
SP  - 3013
EP  - 3022
VL  - 45
IS  - 3
DO  - 10.1016/j.ceramint.2018.10.120
UR  - https://hdl.handle.net/21.15107/rcub_dais_4635
ER  - 
@article{
author = "Terzić, Anja and Obradović, Nina and Kosanović, Darko and Stojanović, Jovica and Đorđević, Antonije and Andrić, Ljubiša and Pavlović, Vladimir B.",
year = "2019",
abstract = "Steatite, as ceramic with composition predominantly resting on magnesium silicate, was produced from economic resources – talc, aluminosilicate clays, and either BaCO3 or feldspar as flux. Titanium dioxide was a doping agent. Four steatite mixtures were mechanically activated in a planetary ball mill for 30, 45 or 60 min, prior to the thermal treatment. Two-step sintering with initial phase set at 1350 °C and holding period conducted at 1250 °C was applied to initiate diffusion and prevent grain growth. Thereby, a high density ceramic material with low-porous submicron structure was acquired. The effects of TiO2 addition on densification, microstructure, and dielectric characteristics of steatites were monitored. The thermal stability of green mixtures was tested by differential thermal and thermogravimetric analyses. Changes in crystallinity and mineral phase composition were observed by the X-ray diffraction technique. Microstructural visualization with spatial arrangements of individual chemical elements on surface of the sintered ceramics was acquired by scanning electron microscopy accompanied with EDS mapping. In order to test the possibility of employment of the obtained steatites in insulation materials, electrical measurements were conducted by recording variations of the dielectric constant and loss tangent as a function of alternations in the mix-design and the mechanical activation period.",
publisher = "Elsevier",
journal = "Ceramics International",
title = "Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics",
pages = "3013-3022",
volume = "45",
number = "3",
doi = "10.1016/j.ceramint.2018.10.120",
url = "https://hdl.handle.net/21.15107/rcub_dais_4635"
}
Terzić, A., Obradović, N., Kosanović, D., Stojanović, J., Đorđević, A., Andrić, L.,& Pavlović, V. B. (2019). Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics.
Ceramics International
Elsevier., 45(3), 3013-3022.
https://doi.org/10.1016/j.ceramint.2018.10.120
Terzić A, Obradović N, Kosanović D, Stojanović J, Đorđević A, Andrić L, Pavlović VB. Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics. Ceramics International. 2019;45(3):3013-3022.
doi:10.1016/j.ceramint.2018.10.120.
Terzić Anja, Obradović Nina, Kosanović Darko, Stojanović Jovica, Đorđević Antonije, Andrić Ljubiša, Pavlović Vladimir B., "Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics" Ceramics International, 45, no. 3 (2019):3013-3022,
https://doi.org/10.1016/j.ceramint.2018.10.120 .
1
1

ToF-ERDA/RBS analysis of annealed TiO2 nanotubes grown onto FTO glass

Vujančević, Jelena; Bjelajac, Anđelika; Provatas, Georgios; Siketić, Zdravko; Jakšić, Milko; Pavlović, Vladimir B.; Janaćković, Đorđe

(Novi Sad : Faculty of Technology, 2019)

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Provatas, Georgios
AU  - Siketić, Zdravko
AU  - Jakšić, Milko
AU  - Pavlović, Vladimir B.
AU  - Janaćković, Đorđe
PY  - 2019
AB  - Different semiconductors have been studied as photoanode material for solar cells. Among them, TiO2 has been shown to be the best material due to its chemical stability and good charge transport capability. It is usually deposited onto FTO glass (F-SnO2), and then heated at high temperature in order to obtain inter-crystalline electric contact for improving electron conductivity. The focus of this research was chemical analysis of the TiO2 nanotubes (NTs) obtained by anodization of titanium film on FTO glass using NH4F in ethylene glycol electrolyte. There are only few studies suggesting that the electrolyte is a source of N dopant in TiO2, but also Sn diffusion from FTO support was reported. This study aims to show the chemical distribution of elements of interest along the nanotubes depth. For that purpose the time-of-flight elastic recoil detection analysis (ToF-ERDA) and Rutherford backscattering (RBS) methods were used as complementary techniques for chemical analysis of both light, such is N, and heavy elements, such is Sn. The TiO2 NTs films were annealed at different temperatures (450– 630 °C) and the impact of the heating temperature on the chemical distribution was followed.
PB  - Novi Sad : Faculty of Technology
C3  - Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad
T1  - ToF-ERDA/RBS analysis of annealed TiO2 nanotubes grown onto FTO glass
SP  - 132
EP  - 132
UR  - https://hdl.handle.net/21.15107/rcub_dais_6985
ER  - 
@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Provatas, Georgios and Siketić, Zdravko and Jakšić, Milko and Pavlović, Vladimir B. and Janaćković, Đorđe",
year = "2019",
abstract = "Different semiconductors have been studied as photoanode material for solar cells. Among them, TiO2 has been shown to be the best material due to its chemical stability and good charge transport capability. It is usually deposited onto FTO glass (F-SnO2), and then heated at high temperature in order to obtain inter-crystalline electric contact for improving electron conductivity. The focus of this research was chemical analysis of the TiO2 nanotubes (NTs) obtained by anodization of titanium film on FTO glass using NH4F in ethylene glycol electrolyte. There are only few studies suggesting that the electrolyte is a source of N dopant in TiO2, but also Sn diffusion from FTO support was reported. This study aims to show the chemical distribution of elements of interest along the nanotubes depth. For that purpose the time-of-flight elastic recoil detection analysis (ToF-ERDA) and Rutherford backscattering (RBS) methods were used as complementary techniques for chemical analysis of both light, such is N, and heavy elements, such is Sn. The TiO2 NTs films were annealed at different temperatures (450– 630 °C) and the impact of the heating temperature on the chemical distribution was followed.",
publisher = "Novi Sad : Faculty of Technology",
journal = "Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad",
title = "ToF-ERDA/RBS analysis of annealed TiO2 nanotubes grown onto FTO glass",
pages = "132-132",
url = "https://hdl.handle.net/21.15107/rcub_dais_6985"
}
Vujančević, J., Bjelajac, A., Provatas, G., Siketić, Z., Jakšić, M., Pavlović, V. B.,& Janaćković, Đ. (2019). ToF-ERDA/RBS analysis of annealed TiO2 nanotubes grown onto FTO glass.
Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad
Novi Sad : Faculty of Technology., 132-132.
Vujančević J, Bjelajac A, Provatas G, Siketić Z, Jakšić M, Pavlović VB, Janaćković Đ. ToF-ERDA/RBS analysis of annealed TiO2 nanotubes grown onto FTO glass. Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad. 2019;:132-132.
Vujančević Jelena, Bjelajac Anđelika, Provatas Georgios, Siketić Zdravko, Jakšić Milko, Pavlović Vladimir B., Janaćković Đorđe, "ToF-ERDA/RBS analysis of annealed TiO2 nanotubes grown onto FTO glass" Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad (2019):132-132

Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering

Obradović, Nina; Pavlović, Vera P.; Kachlik, Martin; Maca, Karel; Olćan, Dragan; Đorđević, Antonije; Tshantshapanyan, Ani; Vlahović, Branislav; Pavlović, Vladimir B.

(Taylor and Francis, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Pavlović, Vera P.
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Olćan, Dragan
AU  - Đorđević, Antonije
AU  - Tshantshapanyan, Ani
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Sintering of pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with the addition of 5 mass % TeO2 was studied. Green bodies were prepared from powder mixtures mechanically activated in a high-energy planetary mill, shaped by uniaxial (20 MPa) and cold isostatic pressing (1000 MPa). The pressure-less sintering of these specimens was performed at 1350°C for 1 h. High relative density over 95% of the theoretical value was obtained through solid-state reaction and pressure-less sintering of powder activated for 40 min, and for the first time reported in the literature. Phase composition and microstructures of sintered samples were determined by XRD and SEM, coupled with EDS mapping. The real part of the complex relative permittivity of the samples was measured at 200 MHz. The loss tangent of all samples was below the resolution of the measurement setup. A strong correlation between the relative permittivity and the density agrees with previously published data.
PB  - Taylor and Francis
T2  - Advances in Applied Ceramics
T1  - Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering
SP  - 241
EP  - 248
VL  - 118
IS  - 5
DO  - 10.1080/17436753.2018.1548150
UR  - https://hdl.handle.net/21.15107/rcub_dais_4557
ER  - 
@article{
author = "Obradović, Nina and Pavlović, Vera P. and Kachlik, Martin and Maca, Karel and Olćan, Dragan and Đorđević, Antonije and Tshantshapanyan, Ani and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Sintering of pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with the addition of 5 mass % TeO2 was studied. Green bodies were prepared from powder mixtures mechanically activated in a high-energy planetary mill, shaped by uniaxial (20 MPa) and cold isostatic pressing (1000 MPa). The pressure-less sintering of these specimens was performed at 1350°C for 1 h. High relative density over 95% of the theoretical value was obtained through solid-state reaction and pressure-less sintering of powder activated for 40 min, and for the first time reported in the literature. Phase composition and microstructures of sintered samples were determined by XRD and SEM, coupled with EDS mapping. The real part of the complex relative permittivity of the samples was measured at 200 MHz. The loss tangent of all samples was below the resolution of the measurement setup. A strong correlation between the relative permittivity and the density agrees with previously published data.",
publisher = "Taylor and Francis",
journal = "Advances in Applied Ceramics",
title = "Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering",
pages = "241-248",
volume = "118",
number = "5",
doi = "10.1080/17436753.2018.1548150",
url = "https://hdl.handle.net/21.15107/rcub_dais_4557"
}
Obradović, N., Pavlović, V. P., Kachlik, M., Maca, K., Olćan, D., Đorđević, A., Tshantshapanyan, A., Vlahović, B.,& Pavlović, V. B. (2019). Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering.
Advances in Applied Ceramics
Taylor and Francis., 118(5), 241-248.
https://doi.org/10.1080/17436753.2018.1548150
Obradović N, Pavlović VP, Kachlik M, Maca K, Olćan D, Đorđević A, Tshantshapanyan A, Vlahović B, Pavlović VB. Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering. Advances in Applied Ceramics. 2019;118(5):241-248.
doi:10.1080/17436753.2018.1548150.
Obradović Nina, Pavlović Vera P., Kachlik Martin, Maca Karel, Olćan Dragan, Đorđević Antonije, Tshantshapanyan Ani, Vlahović Branislav, Pavlović Vladimir B., "Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering" Advances in Applied Ceramics, 118, no. 5 (2019):241-248,
https://doi.org/10.1080/17436753.2018.1548150 .
3
3
3

Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing

Nikolić, Maria Vesna; Vasiljević, Zorka Ž.; Luković, Miloljub D.; Pavlović, Vera P.; Krstić, Jugoslav B.; Vujančević, Jelena; Tadić, Nenad B.; Vlahović, Branislav; Pavlović, Vladimir B.

(John Wiley & Sons, Inc., 2019)

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Vasiljević, Zorka Ž.
AU  - Luković, Miloljub D.
AU  - Pavlović, Vera P.
AU  - Krstić, Jugoslav B.
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.
PB  - John Wiley & Sons, Inc.
T2  - International Journal of Applied Ceramic Technology
T1  - Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing
SP  - 981
EP  - 993
VL  - 16
IS  - 3
DO  - 10.1111/ijac.13190
UR  - https://hdl.handle.net/21.15107/rcub_dais_4848
ER  - 
@article{
author = "Nikolić, Maria Vesna and Vasiljević, Zorka Ž. and Luković, Miloljub D. and Pavlović, Vera P. and Krstić, Jugoslav B. and Vujančević, Jelena and Tadić, Nenad B. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.",
publisher = "John Wiley & Sons, Inc.",
journal = "International Journal of Applied Ceramic Technology",
title = "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing",
pages = "981-993",
volume = "16",
number = "3",
doi = "10.1111/ijac.13190",
url = "https://hdl.handle.net/21.15107/rcub_dais_4848"
}
Nikolić, M. V., Vasiljević, Z. Ž., Luković, M. D., Pavlović, V. P., Krstić, J. B., Vujančević, J., Tadić, N. B., Vlahović, B.,& Pavlović, V. B. (2019). Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing.
International Journal of Applied Ceramic Technology
John Wiley & Sons, Inc.., 16(3), 981-993.
https://doi.org/10.1111/ijac.13190
Nikolić MV, Vasiljević ZŽ, Luković MD, Pavlović VP, Krstić JB, Vujančević J, Tadić NB, Vlahović B, Pavlović VB. Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing. International Journal of Applied Ceramic Technology. 2019;16(3):981-993.
doi:10.1111/ijac.13190.
Nikolić Maria Vesna, Vasiljević Zorka Ž., Luković Miloljub D., Pavlović Vera P., Krstić Jugoslav B., Vujančević Jelena, Tadić Nenad B., Vlahović Branislav, Pavlović Vladimir B., "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing" International Journal of Applied Ceramic Technology, 16, no. 3 (2019):981-993,
https://doi.org/10.1111/ijac.13190 .
13
9
12

Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure

Filipović, Suzana; Pavlović, Vera P.; Mitrić, Miodrag; Lević, Steva; Mitrović, Nebojša; Maričić, Aleksa; Vlahović, Branislav; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Lević, Steva
AU  - Mitrović, Nebojša
AU  - Maričić, Aleksa
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.
PB  - Springer
T2  - Journal of Advanced Ceramics
T1  - Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure
SP  - 133
EP  - 147
VL  - 8
IS  - 1
DO  - 10.1007/s40145-018-0301-5
UR  - https://hdl.handle.net/21.15107/rcub_dais_5271
ER  - 
@article{
author = "Filipović, Suzana and Pavlović, Vera P. and Mitrić, Miodrag and Lević, Steva and Mitrović, Nebojša and Maričić, Aleksa and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.",
publisher = "Springer",
journal = "Journal of Advanced Ceramics",
title = "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure",
pages = "133-147",
volume = "8",
number = "1",
doi = "10.1007/s40145-018-0301-5",
url = "https://hdl.handle.net/21.15107/rcub_dais_5271"
}
Filipović, S., Pavlović, V. P., Mitrić, M., Lević, S., Mitrović, N., Maričić, A., Vlahović, B.,& Pavlović, V. B. (2019). Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure.
Journal of Advanced Ceramics
Springer., 8(1), 133-147.
https://doi.org/10.1007/s40145-018-0301-5
Filipović S, Pavlović VP, Mitrić M, Lević S, Mitrović N, Maričić A, Vlahović B, Pavlović VB. Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. Journal of Advanced Ceramics. 2019;8(1):133-147.
doi:10.1007/s40145-018-0301-5.
Filipović Suzana, Pavlović Vera P., Mitrić Miodrag, Lević Steva, Mitrović Nebojša, Maričić Aleksa, Vlahović Branislav, Pavlović Vladimir B., "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure" Journal of Advanced Ceramics, 8, no. 1 (2019):133-147,
https://doi.org/10.1007/s40145-018-0301-5 .
1
4
3
6

Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal

Rusmirović, Jelena; Obradović, Nina; Perendija, Jovana; Umićević, Ana; Kapidžić, Ana; Vlahović, Branislav; Pavlović, Vera; Marinković, Aleksandar D.; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Rusmirović, Jelena
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.
PB  - Springer
T2  - Environmental Science and Pollution Research
T1  - Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
SP  - 12379
EP  - 12398
VL  - 26
IS  - 12
DO  - 10.1007/s11356-019-04625-0
UR  - https://hdl.handle.net/21.15107/rcub_dais_5273
ER  - 
@article{
author = "Rusmirović, Jelena and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
abstract = "Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.",
publisher = "Springer",
journal = "Environmental Science and Pollution Research",
title = "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal",
pages = "12379-12398",
volume = "26",
number = "12",
doi = "10.1007/s11356-019-04625-0",
url = "https://hdl.handle.net/21.15107/rcub_dais_5273"
}
Rusmirović, J., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A. D.,& Pavlović, V. B. (2019). Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal.
Environmental Science and Pollution Research
Springer., 26(12), 12379-12398.
https://doi.org/10.1007/s11356-019-04625-0
Rusmirović J, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović V, Marinković AD, Pavlović VB. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environmental Science and Pollution Research. 2019;26(12):12379-12398.
doi:10.1007/s11356-019-04625-0.
Rusmirović Jelena, Obradović Nina, Perendija Jovana, Umićević Ana, Kapidžić Ana, Vlahović Branislav, Pavlović Vera, Marinković Aleksandar D., Pavlović Vladimir B., "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal" Environmental Science and Pollution Research, 26, no. 12 (2019):12379-12398,
https://doi.org/10.1007/s11356-019-04625-0 .
1
4
6
6

Structure and enhanced antimicrobial activity of mechanically activated nano TiO2

Pavlović, Vera P.; Vujančević, Jelena; Mašković, Pavle; Ćirković, Jovana; Papan, Jelena M.; Kosanović, Darko; Dramićanin, Miroslav; Petrović, Predrag B.; Vlahović, Branislav; Pavlović, Vladimir B.

(Wiley, 2019)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Vujančević, Jelena
AU  - Mašković, Pavle
AU  - Ćirković, Jovana
AU  - Papan, Jelena M.
AU  - Kosanović, Darko
AU  - Dramićanin, Miroslav
AU  - Petrović, Predrag B.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
AB  - Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO2 (up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO2 and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X-ray diffraction and nitrogen adsorption-desorption measurements. UV-Vis diffuse reflectance spectra were recorded and the Kubelka-Munk function was applied to convert reflectance into the equivalent band gap energy (Eg) and, consequently, to investigate changes in the Eg value. X-ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO2-based materials with antimicrobial properties that could be used in numerous green technology applications.
PB  - Wiley
T2  - Journal of the American Ceramic Society
T1  - Structure and enhanced antimicrobial activity of mechanically activated nano TiO2
SP  - 7735
EP  - 7745
VL  - 102
IS  - 12
DO  - 10.1111/jace.16668
UR  - https://hdl.handle.net/21.15107/rcub_dais_6453
ER  - 
@article{
author = "Pavlović, Vera P. and Vujančević, Jelena and Mašković, Pavle and Ćirković, Jovana and Papan, Jelena M. and Kosanović, Darko and Dramićanin, Miroslav and Petrović, Predrag B. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO2 (up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO2 and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X-ray diffraction and nitrogen adsorption-desorption measurements. UV-Vis diffuse reflectance spectra were recorded and the Kubelka-Munk function was applied to convert reflectance into the equivalent band gap energy (Eg) and, consequently, to investigate changes in the Eg value. X-ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO2-based materials with antimicrobial properties that could be used in numerous green technology applications.",
publisher = "Wiley",
journal = "Journal of the American Ceramic Society",
title = "Structure and enhanced antimicrobial activity of mechanically activated nano TiO2",
pages = "7735-7745",
volume = "102",
number = "12",
doi = "10.1111/jace.16668",
url = "https://hdl.handle.net/21.15107/rcub_dais_6453"
}
Pavlović, V. P., Vujančević, J., Mašković, P., Ćirković, J., Papan, J. M., Kosanović, D., Dramićanin, M., Petrović, P. B., Vlahović, B.,& Pavlović, V. B. (2019). Structure and enhanced antimicrobial activity of mechanically activated nano TiO2.
Journal of the American Ceramic Society
Wiley., 102(12), 7735-7745.
https://doi.org/10.1111/jace.16668
Pavlović VP, Vujančević J, Mašković P, Ćirković J, Papan JM, Kosanović D, Dramićanin M, Petrović PB, Vlahović B, Pavlović VB. Structure and enhanced antimicrobial activity of mechanically activated nano TiO2. Journal of the American Ceramic Society. 2019;102(12):7735-7745.
doi:10.1111/jace.16668.
Pavlović Vera P., Vujančević Jelena, Mašković Pavle, Ćirković Jovana, Papan Jelena M., Kosanović Darko, Dramićanin Miroslav, Petrović Predrag B., Vlahović Branislav, Pavlović Vladimir B., "Structure and enhanced antimicrobial activity of mechanically activated nano TiO2" Journal of the American Ceramic Society, 102, no. 12 (2019):7735-7745,
https://doi.org/10.1111/jace.16668 .
7
2
3