TY  - CONF
AU  - Trišović, Zaga
AU  - Trišović, Tomislav
AU  - Socalici, Ana Virginia
AU  - Birtok-Baneasa, Corneliu
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/16175
AB  - Drinking water, whether previously purified or not, even if entirely clear, can often be contaminated with bacteria, viruses, or harmful microbes, necessitating disinfection. Disinfection serves as the final and sometimes the sole process in preparing drinking water. This paper presents a solution for the on-demand production of active chlorine (sodium hypochlorite) without the need for storage, aiming to prevent its degradation and ensure the safety of workers during handling.
PB  - Belgrade : The Academy of Applied Technical Studies "Belgrade"
C3  - Conference Proceedings / International Scientific and Professional Conference Politehnika 2023, Belgrade, 15th December 2023
T1  - Innovative system for electrochemical active chlorine production in coaxial and cabinet-type reactors, International scientific and professional conference
SP  - 204
EP  - 208
UR  - https://hdl.handle.net/21.15107/rcub_dais_16175
ER  - 

@conference{
author = "Trišović, Zaga and Trišović, Tomislav and Socalici, Ana Virginia and Birtok-Baneasa, Corneliu",
year = "2023",
abstract = "Drinking water, whether previously purified or not, even if entirely clear, can often be contaminated with bacteria, viruses, or harmful microbes, necessitating disinfection. Disinfection serves as the final and sometimes the sole process in preparing drinking water. This paper presents a solution for the on-demand production of active chlorine (sodium hypochlorite) without the need for storage, aiming to prevent its degradation and ensure the safety of workers during handling.",
publisher = "Belgrade : The Academy of Applied Technical Studies "Belgrade"",
journal = "Conference Proceedings / International Scientific and Professional Conference Politehnika 2023, Belgrade, 15th December 2023",
title = "Innovative system for electrochemical active chlorine production in coaxial and cabinet-type reactors, International scientific and professional conference",
pages = "204-208",
url = "https://hdl.handle.net/21.15107/rcub_dais_16175"
}

Trišović, Z., Trišović, T., Socalici, A. V.,& Birtok-Baneasa, C.. (2023). Innovative system for electrochemical active chlorine production in coaxial and cabinet-type reactors, International scientific and professional conference. in Conference Proceedings / International Scientific and Professional Conference Politehnika 2023, Belgrade, 15th December 2023
Belgrade : The Academy of Applied Technical Studies "Belgrade"., 204-208.
https://hdl.handle.net/21.15107/rcub_dais_16175

Trišović Z, Trišović T, Socalici AV, Birtok-Baneasa C. Innovative system for electrochemical active chlorine production in coaxial and cabinet-type reactors, International scientific and professional conference. in Conference Proceedings / International Scientific and Professional Conference Politehnika 2023, Belgrade, 15th December 2023. 2023;:204-208.
https://hdl.handle.net/21.15107/rcub_dais_16175 .

Trišović, Zaga, Trišović, Tomislav, Socalici, Ana Virginia, Birtok-Baneasa, Corneliu, "Innovative system for electrochemical active chlorine production in coaxial and cabinet-type reactors, International scientific and professional conference" in Conference Proceedings / International Scientific and Professional Conference Politehnika 2023, Belgrade, 15th December 2023 (2023):204-208,
https://hdl.handle.net/21.15107/rcub_dais_16175 .

TY  - CONF
AU  - Trišović, Zaga
AU  - Lazović-Kapor, Tatjana
AU  - Socalici, Ana Virginia
AU  - Jeli, Zorana
AU  - Trišović, Tomislav
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/16176
AB  - Filtration and sorption are vital techniques in water purification,effectively eliminating impurities and microorganisms from the water.
AB  - The widespread use of chlorine synthesis devices, such as HIPOGEN P, has revolutionized water disinfection by generating active chlorine from common salt directly at the point of use. Employing electrolysis with table salt, water, and electricity, the HIPOGEN system ensures efficient and affordable water treatment in various settings, including individual households, urban and rural water systems, and industrial applications [1-2]. Filtration and sorption are vital techniques in water purification, effectively eliminating impurities and microorganisms from the water. This process involves various technologies like sedimentation, sand filtration, lime softening, and activated carbon filtration, ensuring the removal of a wide array of impurities. Biological filtration facilitates the conversion of organic and inorganic matter, resulting in the production of clean water, carbon dioxide, and an increase in microorganism mass. Nitrification and denitrification play crucial roles in the oxidation and reduction of ammonia, respectively, contributing to the removal of nitrogen compounds from water. Ion exchange processes aid in water softening and demineralization, effectively eliminating undesirable dissolved substances through the exchange of ions between the solution and ionic mass. Nanofiltration and reverse osmosis employ semipermeable membranes to effectively remove dissolved substances, making them valuable in water treatment and environmental protection within the chemical engineering sector.
PB  - Baech : Trans Tech Publications
C3  - Book of Abstracts from 9th International Scientific Conference on Advances in Mechanical Engineering. [vol. 2]
T1  - Innovations in Water Treatment
SP  - 112
EP  - 112
VL  - 2
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7185
ER  - 

@conference{
author = "Trišović, Zaga and Lazović-Kapor, Tatjana and Socalici, Ana Virginia and Jeli, Zorana and Trišović, Tomislav",
year = "2023",
abstract = "Filtration and sorption are vital techniques in water purification,effectively eliminating impurities and microorganisms from the water., The widespread use of chlorine synthesis devices, such as HIPOGEN P, has revolutionized water disinfection by generating active chlorine from common salt directly at the point of use. Employing electrolysis with table salt, water, and electricity, the HIPOGEN system ensures efficient and affordable water treatment in various settings, including individual households, urban and rural water systems, and industrial applications [1-2]. Filtration and sorption are vital techniques in water purification, effectively eliminating impurities and microorganisms from the water. This process involves various technologies like sedimentation, sand filtration, lime softening, and activated carbon filtration, ensuring the removal of a wide array of impurities. Biological filtration facilitates the conversion of organic and inorganic matter, resulting in the production of clean water, carbon dioxide, and an increase in microorganism mass. Nitrification and denitrification play crucial roles in the oxidation and reduction of ammonia, respectively, contributing to the removal of nitrogen compounds from water. Ion exchange processes aid in water softening and demineralization, effectively eliminating undesirable dissolved substances through the exchange of ions between the solution and ionic mass. Nanofiltration and reverse osmosis employ semipermeable membranes to effectively remove dissolved substances, making them valuable in water treatment and environmental protection within the chemical engineering sector.",
publisher = "Baech : Trans Tech Publications",
journal = "Book of Abstracts from 9th International Scientific Conference on Advances in Mechanical Engineering. [vol. 2]",
title = "Innovations in Water Treatment",
pages = "112-112",
volume = "2",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7185"
}

Trišović, Z., Lazović-Kapor, T., Socalici, A. V., Jeli, Z.,& Trišović, T.. (2023). Innovations in Water Treatment. in Book of Abstracts from 9th International Scientific Conference on Advances in Mechanical Engineering. [vol. 2]
Baech : Trans Tech Publications., 2, 112-112.
https://hdl.handle.net/21.15107/rcub_machinery_7185

Trišović Z, Lazović-Kapor T, Socalici AV, Jeli Z, Trišović T. Innovations in Water Treatment. in Book of Abstracts from 9th International Scientific Conference on Advances in Mechanical Engineering. [vol. 2]. 2023;2:112-112.
https://hdl.handle.net/21.15107/rcub_machinery_7185 .

Trišović, Zaga, Lazović-Kapor, Tatjana, Socalici, Ana Virginia, Jeli, Zorana, Trišović, Tomislav, "Innovations in Water Treatment" in Book of Abstracts from 9th International Scientific Conference on Advances in Mechanical Engineering. [vol. 2], 2 (2023):112-112,
https://hdl.handle.net/21.15107/rcub_machinery_7185 .

TY  - CONF
AU  - Trišović, Zaga
AU  - Trišović, Tomislav
AU  - Socalici, Ana Virginia
AU  - Jeli, Zorana
AU  - Baneasa Birtok, Corneliu
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/16177
AB  - For efficient design and reliable operation of the system, it is necessary to collect as much data as possible on the flow and composition of the wastewater in order to ensure compliance with all regulatory requirements.
AB  - For efficient design and reliable operation of the system, it is necessary to collect as much data as possible on the flow and composition of the wastewater in order to ensure compliance with all regulatory requirements. Adoption of new standards and regulations, along with penalties for noncompliance, encourages the use of devices and facilities for wastewater treatment to ensure safe discharge into the environment. Municipal wastewater requires complex purification processes to remove organic and inorganic substances, including surfactants such as soaps and detergents. Wastewater from metal processing industries, which include various chemicals, require complex purification processes, including chemical treatment to remove pollutants. Treated waters (effluents) can be discharged into natural watercourses, used for irrigation of energy crops, or injected underground, while sludge can be used as organic fertilizer, and biogas for energy production (Picture 1). In this paper, new techniques and devices in the field of wastewater treatment technology will be presented.
PB  - Baech : Trans Tech Publication
C3  - Book of Abstracts from 9th International Scientific Conference on Advances in Mechanical Engineering. [vol. 2]
T1  - Innovations in Wastewater Treatment
EP  - 115
VL  - 2
IS  - 115
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7184
ER  - 

@conference{
author = "Trišović, Zaga and Trišović, Tomislav and Socalici, Ana Virginia and Jeli, Zorana and Baneasa Birtok, Corneliu",
year = "2023",
abstract = "For efficient design and reliable operation of the system, it is necessary to collect as much data as possible on the flow and composition of the wastewater in order to ensure compliance with all regulatory requirements., For efficient design and reliable operation of the system, it is necessary to collect as much data as possible on the flow and composition of the wastewater in order to ensure compliance with all regulatory requirements. Adoption of new standards and regulations, along with penalties for noncompliance, encourages the use of devices and facilities for wastewater treatment to ensure safe discharge into the environment. Municipal wastewater requires complex purification processes to remove organic and inorganic substances, including surfactants such as soaps and detergents. Wastewater from metal processing industries, which include various chemicals, require complex purification processes, including chemical treatment to remove pollutants. Treated waters (effluents) can be discharged into natural watercourses, used for irrigation of energy crops, or injected underground, while sludge can be used as organic fertilizer, and biogas for energy production (Picture 1). In this paper, new techniques and devices in the field of wastewater treatment technology will be presented.",
publisher = "Baech : Trans Tech Publication",
journal = "Book of Abstracts from 9th International Scientific Conference on Advances in Mechanical Engineering. [vol. 2]",
title = "Innovations in Wastewater Treatment",
pages = "115",
volume = "2",
number = "115",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7184"
}

Trišović, Z., Trišović, T., Socalici, A. V., Jeli, Z.,& Baneasa Birtok, C.. (2023). Innovations in Wastewater Treatment. in Book of Abstracts from 9th International Scientific Conference on Advances in Mechanical Engineering. [vol. 2]
Baech : Trans Tech Publication., 2(115).
https://hdl.handle.net/21.15107/rcub_machinery_7184

Trišović Z, Trišović T, Socalici AV, Jeli Z, Baneasa Birtok C. Innovations in Wastewater Treatment. in Book of Abstracts from 9th International Scientific Conference on Advances in Mechanical Engineering. [vol. 2]. 2023;2(115):null-115.
https://hdl.handle.net/21.15107/rcub_machinery_7184 .

Trišović, Zaga, Trišović, Tomislav, Socalici, Ana Virginia, Jeli, Zorana, Baneasa Birtok, Corneliu, "Innovations in Wastewater Treatment" in Book of Abstracts from 9th International Scientific Conference on Advances in Mechanical Engineering. [vol. 2], 2, no. 115 (2023),
https://hdl.handle.net/21.15107/rcub_machinery_7184 .

TY  - JOUR
AU  - Rafailović, Lidija D.
AU  - Jovanović, Aleksandar Z.
AU  - Gutić, Sanjin J.
AU  - Wehr, Jürgen
AU  - Rentenberger, Christian
AU  - Trišović, Tomislav
AU  - Pašti, Igor A.
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13567
AB  - The conductivity and the state of the surface of supports are of vital importance for metallization via electrodeposition. In this study, we show that the metallization of a carbon fiber-reinforced polymer (CFRP) can be carried out directly if the intermediate graphene oxide (GO) layer is chemically reduced on the CFRP surface. Notably, this approach utilizing only the chemically reduced GO as a conductive support allows us to obtain insights into the interaction of rGO and the electrodeposited metal. Our study reveals that under the same contact current experimental conditions, the electrodeposition of Cu and Ni on rGO follows significantly different deposition modes, resulting in the formation of three-dimensional (3D) and free-standing metallic foils, respectively. Considering that Ni adsorption energy is larger than Ni cohesive energy, it is expected that the adhesion of Ni on rGO@CFRP is enhanced compared to Cu. In contrast, the adhesion of deposited Ni is reduced, suggesting diffusion of H+ between rGO and CFRP, which promotes the hydrogen evolution reaction (HER) and results in the formation of free-standing Ni foils. We ascribe this phenomenon to the unique properties of rGO and the nature of Cu and Ni deposition from electrolytic baths. In the latter, the high adsorption energy of Ni on defective rGO along with HER is the key factor for the formation of the porous layer and free-standing foils. © 2022 The Authors. Published by American Chemical Society.
T2  - ACS Omega
T1  - New Insights into the Metallization of Graphene-Supported Composite Materials-from 3D Cu-Grown Structures to Free-Standing Electrodeposited Porous Ni Foils
SP  - 4352
EP  - 4362
VL  - 7
IS  - 5
DO  - 10.1021/acsomega.1c06145
UR  - https://hdl.handle.net/21.15107/rcub_dais_13567
ER  - 

@article{
author = "Rafailović, Lidija D. and Jovanović, Aleksandar Z. and Gutić, Sanjin J. and Wehr, Jürgen and Rentenberger, Christian and Trišović, Tomislav and Pašti, Igor A.",
year = "2022",
abstract = "The conductivity and the state of the surface of supports are of vital importance for metallization via electrodeposition. In this study, we show that the metallization of a carbon fiber-reinforced polymer (CFRP) can be carried out directly if the intermediate graphene oxide (GO) layer is chemically reduced on the CFRP surface. Notably, this approach utilizing only the chemically reduced GO as a conductive support allows us to obtain insights into the interaction of rGO and the electrodeposited metal. Our study reveals that under the same contact current experimental conditions, the electrodeposition of Cu and Ni on rGO follows significantly different deposition modes, resulting in the formation of three-dimensional (3D) and free-standing metallic foils, respectively. Considering that Ni adsorption energy is larger than Ni cohesive energy, it is expected that the adhesion of Ni on rGO@CFRP is enhanced compared to Cu. In contrast, the adhesion of deposited Ni is reduced, suggesting diffusion of H+ between rGO and CFRP, which promotes the hydrogen evolution reaction (HER) and results in the formation of free-standing Ni foils. We ascribe this phenomenon to the unique properties of rGO and the nature of Cu and Ni deposition from electrolytic baths. In the latter, the high adsorption energy of Ni on defective rGO along with HER is the key factor for the formation of the porous layer and free-standing foils. © 2022 The Authors. Published by American Chemical Society.",
journal = "ACS Omega",
title = "New Insights into the Metallization of Graphene-Supported Composite Materials-from 3D Cu-Grown Structures to Free-Standing Electrodeposited Porous Ni Foils",
pages = "4352-4362",
volume = "7",
number = "5",
doi = "10.1021/acsomega.1c06145",
url = "https://hdl.handle.net/21.15107/rcub_dais_13567"
}

Rafailović, L. D., Jovanović, A. Z., Gutić, S. J., Wehr, J., Rentenberger, C., Trišović, T.,& Pašti, I. A.. (2022). New Insights into the Metallization of Graphene-Supported Composite Materials-from 3D Cu-Grown Structures to Free-Standing Electrodeposited Porous Ni Foils. in ACS Omega, 7(5), 4352-4362.
https://doi.org/10.1021/acsomega.1c06145
https://hdl.handle.net/21.15107/rcub_dais_13567

Rafailović LD, Jovanović AZ, Gutić SJ, Wehr J, Rentenberger C, Trišović T, Pašti IA. New Insights into the Metallization of Graphene-Supported Composite Materials-from 3D Cu-Grown Structures to Free-Standing Electrodeposited Porous Ni Foils. in ACS Omega. 2022;7(5):4352-4362.
doi:10.1021/acsomega.1c06145
https://hdl.handle.net/21.15107/rcub_dais_13567 .

Rafailović, Lidija D., Jovanović, Aleksandar Z., Gutić, Sanjin J., Wehr, Jürgen, Rentenberger, Christian, Trišović, Tomislav, Pašti, Igor A., "New Insights into the Metallization of Graphene-Supported Composite Materials-from 3D Cu-Grown Structures to Free-Standing Electrodeposited Porous Ni Foils" in ACS Omega, 7, no. 5 (2022):4352-4362,
https://doi.org/10.1021/acsomega.1c06145 .,
https://hdl.handle.net/21.15107/rcub_dais_13567 .

TY  - CONF
AU  - Rafailović, Lidija D.
AU  - Gammer, Christoph
AU  - Trišović, Tomislav Lj.
AU  - Rentenberger, Christian
AU  - Jovanović, Aleksandar Z
AU  - Pašti, Igor A.
AU  - Gutić, Sanjin
AU  - Karnthaler, H. Peter
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12385
AB  - The discovery of nanostructured materials led to ground-breaking findings and significant technological advancement in recent years and is therefore attracting continuous attention from both, academia, and industry for a variety of structural and functional applications [1]. To design nanostructured materials with new functionalities, we combine electrochemical and electroless chemical synthesis with structural studies on different length scales including transmission electron microscopy. The possibility to produce nanostructured metals containing nanoscaled twins, both growth twins and deformation twins, is considered as a promising approach for the synthesis of novel high-performance materials in recent years [1]. Unfortunately, the phenomenon of twinning occurs only in certain metals, such as copper and until recently, it seemed impossible to make aluminium with a high density of grown-in twins. In the present work, we demonstrate the use of electrodeposition as synthesis method to make Al layers with a high density of genuine growth twins [2]. This unexpected result demonstrates a versatile and cost-effective nanoengineering technique for the formation of pure Al layers with a high density of twins. The atomic structure of a twin in aluminium is shown in a transmission electron microscopy image (cf. Fig. 1). In high density, these symmetric lattice imperfections can yield a material that shows good electrical properties, high hardness and good deformability. In addition, we show that electrochemical synthesis approaches can be used to create high surface area functionalized foams and ordered nanostructures for potential sensing and energy-related applications [3-6].
PB  - The Electrochemical Society
C3  - ECS Meeting Abstracts
C3  - International Journal of Sustainable Energy Planning and Management
T1  - Design of Nanostructured Materials By Electrochemical Approaches: [Invited]
SP  - 694
EP  - 694
VL  - MA2021-02
IS  - 18
DO  - 10.1149/MA2021-0218694mtgabs
UR  - https://hdl.handle.net/21.15107/rcub_dais_12385
ER  - 

@conference{
author = "Rafailović, Lidija D. and Gammer, Christoph and Trišović, Tomislav Lj. and Rentenberger, Christian and Jovanović, Aleksandar Z and Pašti, Igor A. and Gutić, Sanjin and Karnthaler, H. Peter",
year = "2021",
abstract = "The discovery of nanostructured materials led to ground-breaking findings and significant technological advancement in recent years and is therefore attracting continuous attention from both, academia, and industry for a variety of structural and functional applications [1]. To design nanostructured materials with new functionalities, we combine electrochemical and electroless chemical synthesis with structural studies on different length scales including transmission electron microscopy. The possibility to produce nanostructured metals containing nanoscaled twins, both growth twins and deformation twins, is considered as a promising approach for the synthesis of novel high-performance materials in recent years [1]. Unfortunately, the phenomenon of twinning occurs only in certain metals, such as copper and until recently, it seemed impossible to make aluminium with a high density of grown-in twins. In the present work, we demonstrate the use of electrodeposition as synthesis method to make Al layers with a high density of genuine growth twins [2]. This unexpected result demonstrates a versatile and cost-effective nanoengineering technique for the formation of pure Al layers with a high density of twins. The atomic structure of a twin in aluminium is shown in a transmission electron microscopy image (cf. Fig. 1). In high density, these symmetric lattice imperfections can yield a material that shows good electrical properties, high hardness and good deformability. In addition, we show that electrochemical synthesis approaches can be used to create high surface area functionalized foams and ordered nanostructures for potential sensing and energy-related applications [3-6].",
publisher = "The Electrochemical Society",
journal = "ECS Meeting Abstracts, International Journal of Sustainable Energy Planning and Management",
title = "Design of Nanostructured Materials By Electrochemical Approaches: [Invited]",
pages = "694-694",
volume = "MA2021-02",
number = "18",
doi = "10.1149/MA2021-0218694mtgabs",
url = "https://hdl.handle.net/21.15107/rcub_dais_12385"
}

Rafailović, L. D., Gammer, C., Trišović, T. Lj., Rentenberger, C., Jovanović, A. Z., Pašti, I. A., Gutić, S.,& Karnthaler, H. P.. (2021). Design of Nanostructured Materials By Electrochemical Approaches: [Invited]. in ECS Meeting Abstracts
The Electrochemical Society., MA2021-02(18), 694-694.
https://doi.org/10.1149/MA2021-0218694mtgabs
https://hdl.handle.net/21.15107/rcub_dais_12385

Rafailović LD, Gammer C, Trišović TL, Rentenberger C, Jovanović AZ, Pašti IA, Gutić S, Karnthaler HP. Design of Nanostructured Materials By Electrochemical Approaches: [Invited]. in ECS Meeting Abstracts. 2021;MA2021-02(18):694-694.
doi:10.1149/MA2021-0218694mtgabs
https://hdl.handle.net/21.15107/rcub_dais_12385 .

Rafailović, Lidija D., Gammer, Christoph, Trišović, Tomislav Lj., Rentenberger, Christian, Jovanović, Aleksandar Z, Pašti, Igor A., Gutić, Sanjin, Karnthaler, H. Peter, "Design of Nanostructured Materials By Electrochemical Approaches: [Invited]" in ECS Meeting Abstracts, MA2021-02, no. 18 (2021):694-694,
https://doi.org/10.1149/MA2021-0218694mtgabs .,
https://hdl.handle.net/21.15107/rcub_dais_12385 .

TY  - JOUR
AU  - Spasojević, Milica
AU  - Ribić Zelenović, Lenka
AU  - Spasojević, Miroslav
AU  - Trišović, Tomislav
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10033
AB  - A catalytic coating composed of a mixture of RuO2 and Pt nanocrystals was prepared by a thermal procedure on a titanium substrate and used for the electrochemical oxidation of methanol. The adsorption of the intermediate CO, formed by methanol oxidation on Pt nanocrystals, depended on potential and the coating composition. An increase in the RuO2 content decreased the rate of methanol dehydrogenation and increased the rate of oxidation of the strongly bound intermediate COad. This caused a decrease in the maximum coverage of Pt nanocrystals with COad and a shift of the rapid linear drop in COad coverage to more negative potentials.
PB  - Editura Academiei Romane
T2  - Revue Roumaine de Chimie
T1  - The effect of the composition of the alloy of RuO2 and Pt nanocrystals on intermediate adsorption during methanol oxidation
SP  - 481
EP  - 489
VL  - 65
IS  - 5
DO  - 10.33224/rrch.2020.65.5.08
UR  - https://hdl.handle.net/21.15107/rcub_dais_10033
ER  - 

@article{
author = "Spasojević, Milica and Ribić Zelenović, Lenka and Spasojević, Miroslav and Trišović, Tomislav",
year = "2020",
abstract = "A catalytic coating composed of a mixture of RuO2 and Pt nanocrystals was prepared by a thermal procedure on a titanium substrate and used for the electrochemical oxidation of methanol. The adsorption of the intermediate CO, formed by methanol oxidation on Pt nanocrystals, depended on potential and the coating composition. An increase in the RuO2 content decreased the rate of methanol dehydrogenation and increased the rate of oxidation of the strongly bound intermediate COad. This caused a decrease in the maximum coverage of Pt nanocrystals with COad and a shift of the rapid linear drop in COad coverage to more negative potentials.",
publisher = "Editura Academiei Romane",
journal = "Revue Roumaine de Chimie",
title = "The effect of the composition of the alloy of RuO2 and Pt nanocrystals on intermediate adsorption during methanol oxidation",
pages = "481-489",
volume = "65",
number = "5",
doi = "10.33224/rrch.2020.65.5.08",
url = "https://hdl.handle.net/21.15107/rcub_dais_10033"
}

Spasojević, M., Ribić Zelenović, L., Spasojević, M.,& Trišović, T.. (2020). The effect of the composition of the alloy of RuO2 and Pt nanocrystals on intermediate adsorption during methanol oxidation. in Revue Roumaine de Chimie
Editura Academiei Romane., 65(5), 481-489.
https://doi.org/10.33224/rrch.2020.65.5.08
https://hdl.handle.net/21.15107/rcub_dais_10033

Spasojević M, Ribić Zelenović L, Spasojević M, Trišović T. The effect of the composition of the alloy of RuO2 and Pt nanocrystals on intermediate adsorption during methanol oxidation. in Revue Roumaine de Chimie. 2020;65(5):481-489.
doi:10.33224/rrch.2020.65.5.08
https://hdl.handle.net/21.15107/rcub_dais_10033 .

Spasojević, Milica, Ribić Zelenović, Lenka, Spasojević, Miroslav, Trišović, Tomislav, "The effect of the composition of the alloy of RuO2 and Pt nanocrystals on intermediate adsorption during methanol oxidation" in Revue Roumaine de Chimie, 65, no. 5 (2020):481-489,
https://doi.org/10.33224/rrch.2020.65.5.08 .,
https://hdl.handle.net/21.15107/rcub_dais_10033 .

TY  - JOUR
AU  - Spasojević, Miroslav
AU  - Ranđić, Siniša
AU  - Maričić, Aleksa
AU  - Trišović, Tomislav
AU  - Spasojević, Milica
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/9451
AB  - Nanostructured Ni-Fe-W-Cu alloy powders were electrodeposited from an alkaline ammonium citrate solution on a titanium cathode. Powder particles were dendrite- and cauliflower-shaped. The dendritic particles had a high density of branches made up of interconnected globules. XRD analysis showed that the powder contained an amorphous matrix and FCC nanocrystals of the solid solution of Fe, W and Cu in Ni. As the deposition current density increased, the mean nanocrystal size decreased, and the mean value of internal microstrain and the total weight percent of Fe and Ni in the alloy increased. The powders deposited at higher current densities exhibited higher magnetization. During annealing at temperatures up to 460 °C, the powders underwent short-range ordering, which caused an increase in magnetization, whereas at temperatures above 460 °C, the magnetization decreased due to the formation of large FCC crystalline grains.
PB  - Springer
T2  - Science of Sintering
T1  - Morphological, microstructural and magnetic characteristics of electrodeposited Ni-Fe-W-Cu alloy powders
SP  - 109
EP  - 121
VL  - 52
IS  - 1
DO  - 10.2298/SOS2001109S
UR  - https://hdl.handle.net/21.15107/rcub_dais_9451
ER  - 

@article{
author = "Spasojević, Miroslav and Ranđić, Siniša and Maričić, Aleksa and Trišović, Tomislav and Spasojević, Milica",
year = "2020",
abstract = "Nanostructured Ni-Fe-W-Cu alloy powders were electrodeposited from an alkaline ammonium citrate solution on a titanium cathode. Powder particles were dendrite- and cauliflower-shaped. The dendritic particles had a high density of branches made up of interconnected globules. XRD analysis showed that the powder contained an amorphous matrix and FCC nanocrystals of the solid solution of Fe, W and Cu in Ni. As the deposition current density increased, the mean nanocrystal size decreased, and the mean value of internal microstrain and the total weight percent of Fe and Ni in the alloy increased. The powders deposited at higher current densities exhibited higher magnetization. During annealing at temperatures up to 460 °C, the powders underwent short-range ordering, which caused an increase in magnetization, whereas at temperatures above 460 °C, the magnetization decreased due to the formation of large FCC crystalline grains.",
publisher = "Springer",
journal = "Science of Sintering",
title = "Morphological, microstructural and magnetic characteristics of electrodeposited Ni-Fe-W-Cu alloy powders",
pages = "109-121",
volume = "52",
number = "1",
doi = "10.2298/SOS2001109S",
url = "https://hdl.handle.net/21.15107/rcub_dais_9451"
}

Spasojević, M., Ranđić, S., Maričić, A., Trišović, T.,& Spasojević, M.. (2020). Morphological, microstructural and magnetic characteristics of electrodeposited Ni-Fe-W-Cu alloy powders. in Science of Sintering
Springer., 52(1), 109-121.
https://doi.org/10.2298/SOS2001109S
https://hdl.handle.net/21.15107/rcub_dais_9451

Spasojević M, Ranđić S, Maričić A, Trišović T, Spasojević M. Morphological, microstructural and magnetic characteristics of electrodeposited Ni-Fe-W-Cu alloy powders. in Science of Sintering. 2020;52(1):109-121.
doi:10.2298/SOS2001109S
https://hdl.handle.net/21.15107/rcub_dais_9451 .

Spasojević, Miroslav, Ranđić, Siniša, Maričić, Aleksa, Trišović, Tomislav, Spasojević, Milica, "Morphological, microstructural and magnetic characteristics of electrodeposited Ni-Fe-W-Cu alloy powders" in Science of Sintering, 52, no. 1 (2020):109-121,
https://doi.org/10.2298/SOS2001109S .,
https://hdl.handle.net/21.15107/rcub_dais_9451 .

TY  - CONF
AU  - Trišović, Tomislav
AU  - Rafailović, Lidija D.
AU  - Grgur, Branimir
AU  - Milojević, Svetomir
AU  - Jugović, Branimir
AU  - Trišović, Zaga
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/14730
AB  - Tehnički razvoj civilizacje uslovljava sve veći broj uređaja i aparata koji nas okružuju a koje najčešće nismo u stanju da suštinski upoznamo principe njihovog rada. Zbog toga se takvi uređaji najčešće nepotpuno ili čak pogrešno koriste odnosno ne koriste se sve u optimalnim parametrima i u svim funkcijama za koje su projektovani. Nepoznavanje suštine rada pumpi i kompresora ima za posledicu da mnogi inženjeri ne znaju da pravilno odaberu tip pumpe i kompresora za pojedine uslove eksploatacije tj. transporta fluida. Posledica lošeg izbora ovih uređaja je povećana potrošnja energije za njihov rad, opterećenje mreže kuda fluid protiče, veliki ili nizak pritisak na željenim tačkama duž instalacije, smanjeno iskorišćenje i dr. Loš izbor takođe povlači nefunkcionalan rad i drugih uređaja koji zavise od rada pumpi i kompresora što za posledicu ima nekvalitetan proizvod ili uslugu koju zbirno ta oprema daje. Iz gore navedenih razloga napravljena je aparatura koja na jednostavan način demonstrira princip rada pumpi i kompresora. Aparatura na jednostavan način vizuelno prezentuje princip rada pumpi i kompresora, i na jednostavan način demonstrira kako se električna energja pretvara u energiju kretanja radnog kola pumpe a potom pretvara u potencijalnu, statičku i dinamičku energiju fluida nad kojim se vrši rad.
U ovom radu je pokazano da su izmerene H-Q krive u dobroj saglasnosti sa teorijskom Bernulijevom jednačinom. Na aparaturi se najbolje pokazuje funkcionalnost i primena Bernulijeve jednačine kao i njena detaljna analiza. Aparatura je namenjena svima koji imaju potrebu da se pravilno upoznaju sa tehničkim karakteristikama pumpi i kompresora i kako se te karakteristike mogu izmeriti.
AB  - The technical development of civilization is conditioned by the increasing number of devices and apparatus that surround us, which we are most often unable to substantially understand the principles of their operation. As a result, such devices are most often incompletely or even incorrectly used, or not all are used in optimal parameters and in all the functions for which they are designed. Unfamiliarity with the essence of the operation of pumps and compressors results in many engineers not knowing how to correctly select the type of pump and compressor for particular operating conditions, ie fluid transport. The consequence of poor selection of these devices is the increased energy consumption for their operation, the load on the network where the fluid flows, the high or low pressure at the desired points along the installation, reduced utilization, etc. Poor selection also entails dysfunctional operation of other devices that depend on the operation of pumps and compressors, resulting in a poor quality product or service provided by that equipment For the above reasons, an apparatus has been made that demonstrates the principle of operation of pumps and compressors in a simple manner. The apparatus visually presents the principle of operation of the pumps and compressors and demonstrates in a simple manner how electricity is converted into the energy of the pump impeller and then converted into the potential, static and dynamic energy of the fluid over which it is operated.
This paper shows that the measured H-Q curves are in good agreement with the theoretical Bernoulli equation. The functionality and application of Bernoulli's equation and its detailed analysis are best demonstrated on the apparatus. The apparatus is intended for all those who need to know properly the technical characteristics of pumps and compressors and how these characteristics can be measured.
PB  - Čačak : Univerzitet u Kragujevcu, Agronomski fakultet
C3  - Zbornik radova 2 / XXV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 13-14. mart 2020. godine
T1  - Aparatura za određivanje tehničkih karakteristika pumpi i kompresora
T1  - Apparatus for determining the technical characteristics of pumps and compressors
SP  - 495
EP  - 501
UR  - https://hdl.handle.net/21.15107/rcub_dais_14730
ER  - 

@conference{
author = "Trišović, Tomislav and Rafailović, Lidija D. and Grgur, Branimir and Milojević, Svetomir and Jugović, Branimir and Trišović, Zaga",
year = "2020",
abstract = "Tehnički razvoj civilizacje uslovljava sve veći broj uređaja i aparata koji nas okružuju a koje najčešće nismo u stanju da suštinski upoznamo principe njihovog rada. Zbog toga se takvi uređaji najčešće nepotpuno ili čak pogrešno koriste odnosno ne koriste se sve u optimalnim parametrima i u svim funkcijama za koje su projektovani. Nepoznavanje suštine rada pumpi i kompresora ima za posledicu da mnogi inženjeri ne znaju da pravilno odaberu tip pumpe i kompresora za pojedine uslove eksploatacije tj. transporta fluida. Posledica lošeg izbora ovih uređaja je povećana potrošnja energije za njihov rad, opterećenje mreže kuda fluid protiče, veliki ili nizak pritisak na željenim tačkama duž instalacije, smanjeno iskorišćenje i dr. Loš izbor takođe povlači nefunkcionalan rad i drugih uređaja koji zavise od rada pumpi i kompresora što za posledicu ima nekvalitetan proizvod ili uslugu koju zbirno ta oprema daje. Iz gore navedenih razloga napravljena je aparatura koja na jednostavan način demonstrira princip rada pumpi i kompresora. Aparatura na jednostavan način vizuelno prezentuje princip rada pumpi i kompresora, i na jednostavan način demonstrira kako se električna energja pretvara u energiju kretanja radnog kola pumpe a potom pretvara u potencijalnu, statičku i dinamičku energiju fluida nad kojim se vrši rad.
U ovom radu je pokazano da su izmerene H-Q krive u dobroj saglasnosti sa teorijskom Bernulijevom jednačinom. Na aparaturi se najbolje pokazuje funkcionalnost i primena Bernulijeve jednačine kao i njena detaljna analiza. Aparatura je namenjena svima koji imaju potrebu da se pravilno upoznaju sa tehničkim karakteristikama pumpi i kompresora i kako se te karakteristike mogu izmeriti., The technical development of civilization is conditioned by the increasing number of devices and apparatus that surround us, which we are most often unable to substantially understand the principles of their operation. As a result, such devices are most often incompletely or even incorrectly used, or not all are used in optimal parameters and in all the functions for which they are designed. Unfamiliarity with the essence of the operation of pumps and compressors results in many engineers not knowing how to correctly select the type of pump and compressor for particular operating conditions, ie fluid transport. The consequence of poor selection of these devices is the increased energy consumption for their operation, the load on the network where the fluid flows, the high or low pressure at the desired points along the installation, reduced utilization, etc. Poor selection also entails dysfunctional operation of other devices that depend on the operation of pumps and compressors, resulting in a poor quality product or service provided by that equipment For the above reasons, an apparatus has been made that demonstrates the principle of operation of pumps and compressors in a simple manner. The apparatus visually presents the principle of operation of the pumps and compressors and demonstrates in a simple manner how electricity is converted into the energy of the pump impeller and then converted into the potential, static and dynamic energy of the fluid over which it is operated.
This paper shows that the measured H-Q curves are in good agreement with the theoretical Bernoulli equation. The functionality and application of Bernoulli's equation and its detailed analysis are best demonstrated on the apparatus. The apparatus is intended for all those who need to know properly the technical characteristics of pumps and compressors and how these characteristics can be measured.",
publisher = "Čačak : Univerzitet u Kragujevcu, Agronomski fakultet",
journal = "Zbornik radova 2 / XXV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 13-14. mart 2020. godine",
title = "Aparatura za određivanje tehničkih karakteristika pumpi i kompresora, Apparatus for determining the technical characteristics of pumps and compressors",
pages = "495-501",
url = "https://hdl.handle.net/21.15107/rcub_dais_14730"
}

Trišović, T., Rafailović, L. D., Grgur, B., Milojević, S., Jugović, B.,& Trišović, Z.. (2020). Aparatura za određivanje tehničkih karakteristika pumpi i kompresora. in Zbornik radova 2 / XXV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 13-14. mart 2020. godine
Čačak : Univerzitet u Kragujevcu, Agronomski fakultet., 495-501.
https://hdl.handle.net/21.15107/rcub_dais_14730

Trišović T, Rafailović LD, Grgur B, Milojević S, Jugović B, Trišović Z. Aparatura za određivanje tehničkih karakteristika pumpi i kompresora. in Zbornik radova 2 / XXV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 13-14. mart 2020. godine. 2020;:495-501.
https://hdl.handle.net/21.15107/rcub_dais_14730 .

Trišović, Tomislav, Rafailović, Lidija D., Grgur, Branimir, Milojević, Svetomir, Jugović, Branimir, Trišović, Zaga, "Aparatura za određivanje tehničkih karakteristika pumpi i kompresora" in Zbornik radova 2 / XXV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 13-14. mart 2020. godine (2020):495-501,
https://hdl.handle.net/21.15107/rcub_dais_14730 .

TY  - JOUR
AU  - Grgur, Branimir
AU  - Trišović, Tomislav
AU  - Rafailović, Lidija
PY  - 2020
UR  - http://www.sciencedirect.com/science/article/pii/S1350630719320229
UR  - https://dais.sanu.ac.rs/123456789/9816
AB  - The corrosion of the transport tank materials made of stainless steel 316Ti is investigated in a solution containing 12–15% of the commercial sodium hypochlorite solution. Using the electrochemical techniques, weight loss measurements, and optical microscope, it is shown that corrosion occurs due to the metastable pitting. It is proposed that formed metal oxides corrosion product could catalyzed chemical decomposition of hypochlorite solution to oxygen, which provokes the positive shift of the corrosion potentials into the region of metastable pitting.
PB  - Elsevier
T2  - Engineering Failure Analysis
T1  - Corrosion of stainless steel 316Ti tank for the transport 12–15% of hypochlorite solution
SP  - 104768
VL  - 116
DO  - 10.1016/j.engfailanal.2020.104768
UR  - https://hdl.handle.net/21.15107/rcub_dais_9816
ER  - 

@article{
author = "Grgur, Branimir and Trišović, Tomislav and Rafailović, Lidija",
year = "2020",
abstract = "The corrosion of the transport tank materials made of stainless steel 316Ti is investigated in a solution containing 12–15% of the commercial sodium hypochlorite solution. Using the electrochemical techniques, weight loss measurements, and optical microscope, it is shown that corrosion occurs due to the metastable pitting. It is proposed that formed metal oxides corrosion product could catalyzed chemical decomposition of hypochlorite solution to oxygen, which provokes the positive shift of the corrosion potentials into the region of metastable pitting.",
publisher = "Elsevier",
journal = "Engineering Failure Analysis",
title = "Corrosion of stainless steel 316Ti tank for the transport 12–15% of hypochlorite solution",
pages = "104768",
volume = "116",
doi = "10.1016/j.engfailanal.2020.104768",
url = "https://hdl.handle.net/21.15107/rcub_dais_9816"
}

Grgur, B., Trišović, T.,& Rafailović, L.. (2020). Corrosion of stainless steel 316Ti tank for the transport 12–15% of hypochlorite solution. in Engineering Failure Analysis
Elsevier., 116, 104768.
https://doi.org/10.1016/j.engfailanal.2020.104768
https://hdl.handle.net/21.15107/rcub_dais_9816

Grgur B, Trišović T, Rafailović L. Corrosion of stainless steel 316Ti tank for the transport 12–15% of hypochlorite solution. in Engineering Failure Analysis. 2020;116:104768.
doi:10.1016/j.engfailanal.2020.104768
https://hdl.handle.net/21.15107/rcub_dais_9816 .

Grgur, Branimir, Trišović, Tomislav, Rafailović, Lidija, "Corrosion of stainless steel 316Ti tank for the transport 12–15% of hypochlorite solution" in Engineering Failure Analysis, 116 (2020):104768,
https://doi.org/10.1016/j.engfailanal.2020.104768 .,
https://hdl.handle.net/21.15107/rcub_dais_9816 .

TY  - GEN
AU  - Jovanović, Aleksandar
AU  - Kovačina, Jovanka
AU  - Marinković, Aleksandar D.
AU  - Onjia, Antonije E.
AU  - Povrenović, Dragan
AU  - Trišović, Tomislav
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/11629
AB  - Usled razvoja industrije i rastom populacije tokom poslednjih godina javljaju se problemi u vezi sa otpadnim vodama iz proizvodnje koje je neophodno rešavati na ekološki i ekonomičan način. Sve otpadne vode iz postrojenja bez obzira kako su nastale sadrže štetne materije koje mogu da imaju i određen stepen toksičnih primesa, moraju se prečistiti ako njihov kvalitet ne odgovara zakonskim okvirima. Svrha tretmana otpadnih voda je uklanjanje štetnih materija čime se postiže smanjenje stepena njene zagađenosti, a istovremeno se ostvaruje i određen ekonomski i ekološki efekat. Ovo tehničko rešenje predstavlja optimizaciju procesa prečišćavanje otpadnih voda Fabrike streljačke municije u Uzićima. Otpadna voda je prečišćavana postupkom taloženja uz upotrebu kalcijum-oksida u cilju uklanjanja koloidnih materija i teških metala. Većina zagađujućih materija su organskog porekla i njihovo ukljanjanje vršeno je primenom naprednih oksidacionih procesa korišćenjem ozona i ozona u kombinaciji sa ultrazvukom u cilju postizanja kvaliteta vode koji odgovara zakonskoj regulativi. Unapređeni procesi oksidacije predstavljaju najefikasnije metode za uklanjanje i degradaciju teško rastvornih zagađujućih materija iz otpadnih voda. Proces prečišćavanja je optimizovan u odnosu na tehnološki postupak, koncentraciju, vreme tretmana i količinu primenjenog oksidacionog sredstva. Stepen zagađenosti vode organskim jedinjenjima je određivati na osnovu merenja HPK, BPK i koncentracije teških metala (olovo, gvožđe, hrom, bakar, cink, aluminijum).
AB  - Due to the development of industry and population growth in recent years, there are problems related to industrial wastewater that needs to be addressed in an environmentally friendly and economical way. All wastewater from plants, regardless of how it was generated, contains harmful substances that may have a certain degree of toxic impurities and must be treated if its quality does not meet the legal requirements. The purpose of wastewater treatment is the removal of harmful substances, which reduces the degree of its pollution, and at the same time achieves a certain economic and environmental effect. This technical solution ensures the optimization of the wastewater treatment process of the Ammunition Factory in Uzići. Wastewater is purified by a precipitation process using calcium oxide to remove colloidal substances and heavy metals. Most of the pollutants are of organic origin and their removal is performed by applying advanced oxidation processes using ozone and ozone in combination with ultrasound in order to achieve water quality that complies with legal regulations. Advanced oxidation processes are the most efficient methods for removing and degrading poorly soluble pollutants from wastewater. The purification process is optimized in terms of the technological process, concentration, treatment time and the amount of oxidizing agent applied. The degree of water pollution with organic compounds is determined on the basis of measurements of HPK, BOD and the concentration of heavy metals (lead, iron, chromium, copper, zinc, aluminum).
PB  - Belgrade : University of Belgrade, Faculty of Technology and Metallurgy
T1  - Optimizacija procesa prečišćavanja otpadnih voda iz Fabrike streljačke municije Uzići
UR  - https://hdl.handle.net/21.15107/rcub_dais_11629
ER  - 

@misc{
author = "Jovanović, Aleksandar and Kovačina, Jovanka and Marinković, Aleksandar D. and Onjia, Antonije E. and Povrenović, Dragan and Trišović, Tomislav",
year = "2019",
abstract = "Usled razvoja industrije i rastom populacije tokom poslednjih godina javljaju se problemi u vezi sa otpadnim vodama iz proizvodnje koje je neophodno rešavati na ekološki i ekonomičan način. Sve otpadne vode iz postrojenja bez obzira kako su nastale sadrže štetne materije koje mogu da imaju i određen stepen toksičnih primesa, moraju se prečistiti ako njihov kvalitet ne odgovara zakonskim okvirima. Svrha tretmana otpadnih voda je uklanjanje štetnih materija čime se postiže smanjenje stepena njene zagađenosti, a istovremeno se ostvaruje i određen ekonomski i ekološki efekat. Ovo tehničko rešenje predstavlja optimizaciju procesa prečišćavanje otpadnih voda Fabrike streljačke municije u Uzićima. Otpadna voda je prečišćavana postupkom taloženja uz upotrebu kalcijum-oksida u cilju uklanjanja koloidnih materija i teških metala. Većina zagađujućih materija su organskog porekla i njihovo ukljanjanje vršeno je primenom naprednih oksidacionih procesa korišćenjem ozona i ozona u kombinaciji sa ultrazvukom u cilju postizanja kvaliteta vode koji odgovara zakonskoj regulativi. Unapređeni procesi oksidacije predstavljaju najefikasnije metode za uklanjanje i degradaciju teško rastvornih zagađujućih materija iz otpadnih voda. Proces prečišćavanja je optimizovan u odnosu na tehnološki postupak, koncentraciju, vreme tretmana i količinu primenjenog oksidacionog sredstva. Stepen zagađenosti vode organskim jedinjenjima je određivati na osnovu merenja HPK, BPK i koncentracije teških metala (olovo, gvožđe, hrom, bakar, cink, aluminijum)., Due to the development of industry and population growth in recent years, there are problems related to industrial wastewater that needs to be addressed in an environmentally friendly and economical way. All wastewater from plants, regardless of how it was generated, contains harmful substances that may have a certain degree of toxic impurities and must be treated if its quality does not meet the legal requirements. The purpose of wastewater treatment is the removal of harmful substances, which reduces the degree of its pollution, and at the same time achieves a certain economic and environmental effect. This technical solution ensures the optimization of the wastewater treatment process of the Ammunition Factory in Uzići. Wastewater is purified by a precipitation process using calcium oxide to remove colloidal substances and heavy metals. Most of the pollutants are of organic origin and their removal is performed by applying advanced oxidation processes using ozone and ozone in combination with ultrasound in order to achieve water quality that complies with legal regulations. Advanced oxidation processes are the most efficient methods for removing and degrading poorly soluble pollutants from wastewater. The purification process is optimized in terms of the technological process, concentration, treatment time and the amount of oxidizing agent applied. The degree of water pollution with organic compounds is determined on the basis of measurements of HPK, BOD and the concentration of heavy metals (lead, iron, chromium, copper, zinc, aluminum).",
publisher = "Belgrade : University of Belgrade, Faculty of Technology and Metallurgy",
title = "Optimizacija procesa prečišćavanja otpadnih voda iz Fabrike streljačke municije Uzići",
url = "https://hdl.handle.net/21.15107/rcub_dais_11629"
}

Jovanović, A., Kovačina, J., Marinković, A. D., Onjia, A. E., Povrenović, D.,& Trišović, T.. (2019). Optimizacija procesa prečišćavanja otpadnih voda iz Fabrike streljačke municije Uzići. 
Belgrade : University of Belgrade, Faculty of Technology and Metallurgy..
https://hdl.handle.net/21.15107/rcub_dais_11629

Jovanović A, Kovačina J, Marinković AD, Onjia AE, Povrenović D, Trišović T. Optimizacija procesa prečišćavanja otpadnih voda iz Fabrike streljačke municije Uzići. 2019;.
https://hdl.handle.net/21.15107/rcub_dais_11629 .

Jovanović, Aleksandar, Kovačina, Jovanka, Marinković, Aleksandar D., Onjia, Antonije E., Povrenović, Dragan, Trišović, Tomislav, "Optimizacija procesa prečišćavanja otpadnih voda iz Fabrike streljačke municije Uzići" (2019),
https://hdl.handle.net/21.15107/rcub_dais_11629 .

TY  - JOUR
AU  - Spasojević, Miroslav
AU  - Ribić Zelenović, Lenka
AU  - Spasojević, Milica
AU  - Trišović, Tomislav
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/8974
AB  - An active coating, composed of a mixture of nanocrystals of RuO2 with the rutile structure and nanocrystals of metal Pt, was thermally synthetized on a titanium substrate. Cyclic voltammograms and polarization curves showed that the catalytic activity of the coating for the formic acid oxidation in an acidic solution increased with an increase in the RuO2 content, reaching the maximum value at 50 mol % RuO2. Additionally, further increase in the RuO2 content resulted in a decline of the catalytic activity. The catalytic effect was attributed to a bifunctional mechanism and an electronic effect. The bifunctional mechanism had a dominant role and was based on the fact that Ru–OH species were formed on Ru atoms of RuO2 at more negative potentials than on Pt. Those species oxidized the adsorbed COad and HCOOad—species on adjacent Pt atoms of clusters of metal Pt and thus discharge them to oxidize new HCOOH molecules.
PB  - Springer
T2  - Russian Journal of Electrochemistry
T1  - The Mixture of Nanoparticles of RuO2 and Pt Supported on Ti as an Efficient Catalyst for Direct Formic Acid Fuel Cell
SP  - 1350
EP  - 1359
VL  - 55
IS  - 12
DO  - 10.1134/S1023193519120164
UR  - https://hdl.handle.net/21.15107/rcub_dais_8974
ER  - 

@article{
author = "Spasojević, Miroslav and Ribić Zelenović, Lenka and Spasojević, Milica and Trišović, Tomislav",
year = "2019",
abstract = "An active coating, composed of a mixture of nanocrystals of RuO2 with the rutile structure and nanocrystals of metal Pt, was thermally synthetized on a titanium substrate. Cyclic voltammograms and polarization curves showed that the catalytic activity of the coating for the formic acid oxidation in an acidic solution increased with an increase in the RuO2 content, reaching the maximum value at 50 mol % RuO2. Additionally, further increase in the RuO2 content resulted in a decline of the catalytic activity. The catalytic effect was attributed to a bifunctional mechanism and an electronic effect. The bifunctional mechanism had a dominant role and was based on the fact that Ru–OH species were formed on Ru atoms of RuO2 at more negative potentials than on Pt. Those species oxidized the adsorbed COad and HCOOad—species on adjacent Pt atoms of clusters of metal Pt and thus discharge them to oxidize new HCOOH molecules.",
publisher = "Springer",
journal = "Russian Journal of Electrochemistry",
title = "The Mixture of Nanoparticles of RuO2 and Pt Supported on Ti as an Efficient Catalyst for Direct Formic Acid Fuel Cell",
pages = "1350-1359",
volume = "55",
number = "12",
doi = "10.1134/S1023193519120164",
url = "https://hdl.handle.net/21.15107/rcub_dais_8974"
}

Spasojević, M., Ribić Zelenović, L., Spasojević, M.,& Trišović, T.. (2019). The Mixture of Nanoparticles of RuO2 and Pt Supported on Ti as an Efficient Catalyst for Direct Formic Acid Fuel Cell. in Russian Journal of Electrochemistry
Springer., 55(12), 1350-1359.
https://doi.org/10.1134/S1023193519120164
https://hdl.handle.net/21.15107/rcub_dais_8974

Spasojević M, Ribić Zelenović L, Spasojević M, Trišović T. The Mixture of Nanoparticles of RuO2 and Pt Supported on Ti as an Efficient Catalyst for Direct Formic Acid Fuel Cell. in Russian Journal of Electrochemistry. 2019;55(12):1350-1359.
doi:10.1134/S1023193519120164
https://hdl.handle.net/21.15107/rcub_dais_8974 .

Spasojević, Miroslav, Ribić Zelenović, Lenka, Spasojević, Milica, Trišović, Tomislav, "The Mixture of Nanoparticles of RuO2 and Pt Supported on Ti as an Efficient Catalyst for Direct Formic Acid Fuel Cell" in Russian Journal of Electrochemistry, 55, no. 12 (2019):1350-1359,
https://doi.org/10.1134/S1023193519120164 .,
https://hdl.handle.net/21.15107/rcub_dais_8974 .

TY  - JOUR
AU  - Spasojević, Miroslav
AU  - Ribić Zelenović, Lenka
AU  - Spasojević, Milica
AU  - Trišović, Tomislav
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/8973
AB  - An active coating, composed of a mixture of nanocrystals of RuO2 with the rutile structure and nanocrystals of metal Pt, was thermally synthetized on a titanium substrate. Cyclic voltammograms and polarization curves showed that the catalytic activity of the coating for the formic acid oxidation in an acidic solution increased with an increase in the RuO2 content, reaching the maximum value at 50 mol % RuO2. Additionally, further increase in the RuO2 content resulted in a decline of the catalytic activity. The catalytic effect was attributed to a bifunctional mechanism and an electronic effect. The bifunctional mechanism had a dominant role and was based on the fact that Ru–OH species were formed on Ru atoms of RuO2 at more negative potentials than on Pt. Those species oxidized the adsorbed COad and HCOOad—species on adjacent Pt atoms of clusters of metal Pt and thus discharge them to oxidize new HCOOH molecules.
PB  - Springer
T2  - Russian Journal of Electrochemistry
T1  - The Mixture of Nanoparticles of RuO2 and Pt Supported on Ti as an Efficient Catalyst for Direct Formic Acid Fuel Cell
SP  - 1350
EP  - 1359
VL  - 55
IS  - 12
DO  - 10.1134/S1023193519120164
UR  - https://hdl.handle.net/21.15107/rcub_dais_8973
ER  - 

@article{
author = "Spasojević, Miroslav and Ribić Zelenović, Lenka and Spasojević, Milica and Trišović, Tomislav",
year = "2019",
abstract = "An active coating, composed of a mixture of nanocrystals of RuO2 with the rutile structure and nanocrystals of metal Pt, was thermally synthetized on a titanium substrate. Cyclic voltammograms and polarization curves showed that the catalytic activity of the coating for the formic acid oxidation in an acidic solution increased with an increase in the RuO2 content, reaching the maximum value at 50 mol % RuO2. Additionally, further increase in the RuO2 content resulted in a decline of the catalytic activity. The catalytic effect was attributed to a bifunctional mechanism and an electronic effect. The bifunctional mechanism had a dominant role and was based on the fact that Ru–OH species were formed on Ru atoms of RuO2 at more negative potentials than on Pt. Those species oxidized the adsorbed COad and HCOOad—species on adjacent Pt atoms of clusters of metal Pt and thus discharge them to oxidize new HCOOH molecules.",
publisher = "Springer",
journal = "Russian Journal of Electrochemistry",
title = "The Mixture of Nanoparticles of RuO2 and Pt Supported on Ti as an Efficient Catalyst for Direct Formic Acid Fuel Cell",
pages = "1350-1359",
volume = "55",
number = "12",
doi = "10.1134/S1023193519120164",
url = "https://hdl.handle.net/21.15107/rcub_dais_8973"
}

Spasojević, M., Ribić Zelenović, L., Spasojević, M.,& Trišović, T.. (2019). The Mixture of Nanoparticles of RuO2 and Pt Supported on Ti as an Efficient Catalyst for Direct Formic Acid Fuel Cell. in Russian Journal of Electrochemistry
Springer., 55(12), 1350-1359.
https://doi.org/10.1134/S1023193519120164
https://hdl.handle.net/21.15107/rcub_dais_8973

Spasojević M, Ribić Zelenović L, Spasojević M, Trišović T. The Mixture of Nanoparticles of RuO2 and Pt Supported on Ti as an Efficient Catalyst for Direct Formic Acid Fuel Cell. in Russian Journal of Electrochemistry. 2019;55(12):1350-1359.
doi:10.1134/S1023193519120164
https://hdl.handle.net/21.15107/rcub_dais_8973 .

Spasojević, Miroslav, Ribić Zelenović, Lenka, Spasojević, Milica, Trišović, Tomislav, "The Mixture of Nanoparticles of RuO2 and Pt Supported on Ti as an Efficient Catalyst for Direct Formic Acid Fuel Cell" in Russian Journal of Electrochemistry, 55, no. 12 (2019):1350-1359,
https://doi.org/10.1134/S1023193519120164 .,
https://hdl.handle.net/21.15107/rcub_dais_8973 .

TY  - JOUR
AU  - Grgur, Branimir
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
PY  - 2019
UR  - http://www.doiserbia.nb.rs/Article.aspx?id=0352-51391900077G
UR  - https://dais.sanu.ac.rs/123456789/6955
AB  - The electrochemical characteristics of zinc–polyaniline (PANI) secondary cell in the electrolyte containing 0.8 M Na citrate, 0.3 M NH4Cl and 0.3 M ZnCl2 is investigated. Based on the measurements of potentials and voltage of the cell during charge/discharge for the currents in the range of 18 to 45 mA, the specific electrode capacity of 85 to 55 mA h g-1, the specific energy of 60–40 mW h g-1 and the specific power of 150–350 mW g-1, is determined. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. ON172046: Electrochemical synthesis and characterization of nanostructured functional materials for applications in new technologies]
PB  - Belgrade : Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Characteristics of the citrate-based zinc-polyaniline secondary cell with supercapattery behavior
SP  - 1261
EP  - 1270
VL  - 84
IS  - 11
DO  - 10.2298/JSC190709077G
UR  - https://hdl.handle.net/21.15107/rcub_dais_6955
ER  - 

@article{
author = "Grgur, Branimir and Gvozdenović, Milica M. and Jugović, Branimir and Trišović, Tomislav",
year = "2019",
abstract = "The electrochemical characteristics of zinc–polyaniline (PANI) secondary cell in the electrolyte containing 0.8 M Na citrate, 0.3 M NH4Cl and 0.3 M ZnCl2 is investigated. Based on the measurements of potentials and voltage of the cell during charge/discharge for the currents in the range of 18 to 45 mA, the specific electrode capacity of 85 to 55 mA h g-1, the specific energy of 60–40 mW h g-1 and the specific power of 150–350 mW g-1, is determined. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. ON172046: Electrochemical synthesis and characterization of nanostructured functional materials for applications in new technologies]",
publisher = "Belgrade : Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Characteristics of the citrate-based zinc-polyaniline secondary cell with supercapattery behavior",
pages = "1261-1270",
volume = "84",
number = "11",
doi = "10.2298/JSC190709077G",
url = "https://hdl.handle.net/21.15107/rcub_dais_6955"
}

Grgur, B., Gvozdenović, M. M., Jugović, B.,& Trišović, T.. (2019). Characteristics of the citrate-based zinc-polyaniline secondary cell with supercapattery behavior. in Journal of the Serbian Chemical Society
Belgrade : Serbian Chemical Society., 84(11), 1261-1270.
https://doi.org/10.2298/JSC190709077G
https://hdl.handle.net/21.15107/rcub_dais_6955

Grgur B, Gvozdenović MM, Jugović B, Trišović T. Characteristics of the citrate-based zinc-polyaniline secondary cell with supercapattery behavior. in Journal of the Serbian Chemical Society. 2019;84(11):1261-1270.
doi:10.2298/JSC190709077G
https://hdl.handle.net/21.15107/rcub_dais_6955 .

Grgur, Branimir, Gvozdenović, Milica M., Jugović, Branimir, Trišović, Tomislav, "Characteristics of the citrate-based zinc-polyaniline secondary cell with supercapattery behavior" in Journal of the Serbian Chemical Society, 84, no. 11 (2019):1261-1270,
https://doi.org/10.2298/JSC190709077G .,
https://hdl.handle.net/21.15107/rcub_dais_6955 .

TY  - CONF
AU  - Rafailović, Lidija D.
AU  - Gammer, Christoph
AU  - Trišović, Tomislav
AU  - Lutzer, Bernhard
AU  - Rentenberger, Christian
AU  - Jovanović, Aleksandar z.
AU  - Pašti, Igor
AU  - Karnthaler, Hans-Peter
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/7013
AB  - It is the aim of our work to carry out fundamental studies on designing and synthesizing high surface area functionalized foam and ordered structures for their potential sensing and energy related applications. We combine electrochemical synthesis with structural studies on different length scales including transmission electron microscopy. Templates are directly grown by electrodeposition, either by hydrogen bubble formation or by utilizing of ordered structures formed by anodic electrochemical oxidation. [1-3] We employed an elegant approach to obtain open, foam deposits of Ni and Ni alloys, by using electrodeposition at high current densities, to promote hydrogen evolution and bubble templating (cf. Fig.1). [1] In the next step, the high surface area of such materials was funtionalized by Pd utilizing galvanic displacement reaction. Electrochemical testing of the obtained open foam deposits shows promissing catalytical activity for hydrogen evolution in alkaline environments, as well as methanol and ethanol oxidation. In the case of fabrication of nanodendritic Ag simultaneously grown with porous anodic aluminium oxide we accomplished well anchored dendritic Ag nanostructures [2] of long-term stability [3].
1. L. D. Rafailović, C. Gammer, C. Rentenberger, T. Trišović, C. Kleber, H. P. Karnthaler, Nano Energy, 2 (2012) 523 https://doi.org/10.1016/j.nanoen.2012.12.004
2. L.D. Rafailovic, C. Gammer, C. Rentenberger, T. Trisovic, C. Kleber, H.P. Karnthaler, Adv. Mater. 27 (2015) 6438 https://doi.org/10.1002/adma.201502451
3. L.D. Rafailovic, C. Gammer, J. Srajer, T. Trisovic, J. Rahel, H.P. Karnthaler; RSC Adv., 6 (2016) 33348, https://doi.org/10.1039/c5ra26632g
PB  - International Association of Physical Chemists
C3  - Book of abstracts / 7th Regional Symposium on Electrochemistry – South East Europe & 8th Kurt Schwabe Symposium, Split, Croatia, May 27-30, 2019
T1  - Electrochemical approaches in synthesis of high surface area materials
SP  - 35
EP  - 35
UR  - https://hdl.handle.net/21.15107/rcub_dais_7013
ER  - 

@conference{
author = "Rafailović, Lidija D. and Gammer, Christoph and Trišović, Tomislav and Lutzer, Bernhard and Rentenberger, Christian and Jovanović, Aleksandar z. and Pašti, Igor and Karnthaler, Hans-Peter",
year = "2019",
abstract = "It is the aim of our work to carry out fundamental studies on designing and synthesizing high surface area functionalized foam and ordered structures for their potential sensing and energy related applications. We combine electrochemical synthesis with structural studies on different length scales including transmission electron microscopy. Templates are directly grown by electrodeposition, either by hydrogen bubble formation or by utilizing of ordered structures formed by anodic electrochemical oxidation. [1-3] We employed an elegant approach to obtain open, foam deposits of Ni and Ni alloys, by using electrodeposition at high current densities, to promote hydrogen evolution and bubble templating (cf. Fig.1). [1] In the next step, the high surface area of such materials was funtionalized by Pd utilizing galvanic displacement reaction. Electrochemical testing of the obtained open foam deposits shows promissing catalytical activity for hydrogen evolution in alkaline environments, as well as methanol and ethanol oxidation. In the case of fabrication of nanodendritic Ag simultaneously grown with porous anodic aluminium oxide we accomplished well anchored dendritic Ag nanostructures [2] of long-term stability [3].
1. L. D. Rafailović, C. Gammer, C. Rentenberger, T. Trišović, C. Kleber, H. P. Karnthaler, Nano Energy, 2 (2012) 523 https://doi.org/10.1016/j.nanoen.2012.12.004
2. L.D. Rafailovic, C. Gammer, C. Rentenberger, T. Trisovic, C. Kleber, H.P. Karnthaler, Adv. Mater. 27 (2015) 6438 https://doi.org/10.1002/adma.201502451
3. L.D. Rafailovic, C. Gammer, J. Srajer, T. Trisovic, J. Rahel, H.P. Karnthaler; RSC Adv., 6 (2016) 33348, https://doi.org/10.1039/c5ra26632g",
publisher = "International Association of Physical Chemists",
journal = "Book of abstracts / 7th Regional Symposium on Electrochemistry – South East Europe & 8th Kurt Schwabe Symposium, Split, Croatia, May 27-30, 2019",
title = "Electrochemical approaches in synthesis of high surface area materials",
pages = "35-35",
url = "https://hdl.handle.net/21.15107/rcub_dais_7013"
}

Rafailović, L. D., Gammer, C., Trišović, T., Lutzer, B., Rentenberger, C., Jovanović, A. z., Pašti, I.,& Karnthaler, H.. (2019). Electrochemical approaches in synthesis of high surface area materials. in Book of abstracts / 7th Regional Symposium on Electrochemistry – South East Europe & 8th Kurt Schwabe Symposium, Split, Croatia, May 27-30, 2019
International Association of Physical Chemists., 35-35.
https://hdl.handle.net/21.15107/rcub_dais_7013

Rafailović LD, Gammer C, Trišović T, Lutzer B, Rentenberger C, Jovanović AZ, Pašti I, Karnthaler H. Electrochemical approaches in synthesis of high surface area materials. in Book of abstracts / 7th Regional Symposium on Electrochemistry – South East Europe & 8th Kurt Schwabe Symposium, Split, Croatia, May 27-30, 2019. 2019;:35-35.
https://hdl.handle.net/21.15107/rcub_dais_7013 .

Rafailović, Lidija D., Gammer, Christoph, Trišović, Tomislav, Lutzer, Bernhard, Rentenberger, Christian, Jovanović, Aleksandar z., Pašti, Igor, Karnthaler, Hans-Peter, "Electrochemical approaches in synthesis of high surface area materials" in Book of abstracts / 7th Regional Symposium on Electrochemistry – South East Europe & 8th Kurt Schwabe Symposium, Split, Croatia, May 27-30, 2019 (2019):35-35,
https://hdl.handle.net/21.15107/rcub_dais_7013 .

TY  - CONF
AU  - Rafailović, Lidija D.
AU  - Gammer, Christoph
AU  - Trišović, Tomislav
AU  - Retenberger, Christian
AU  - Jovanović, Aleksandar Z.
AU  - Pašti, Igor
AU  - Karnthaler, Hans-Peter
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/7014
AB  - Extended conference abstract
PB  - Belgrade : Serbian Society for Microscopy
PB  - Belgrade : Institute for Biological Research "Siniša Stanković"
C3  - MCM2019 : proceedings / 14th Multinational Congress on Microscopy, [September 15–20, 2019, Belgrade, Serbia]
T1  - Electrochemical approaches to design materials for potential sensing and energy related applications
SP  - 466
EP  - 467
UR  - https://hdl.handle.net/21.15107/rcub_dais_7014
ER  - 

@conference{
author = "Rafailović, Lidija D. and Gammer, Christoph and Trišović, Tomislav and Retenberger, Christian and Jovanović, Aleksandar Z. and Pašti, Igor and Karnthaler, Hans-Peter",
year = "2019",
abstract = "Extended conference abstract",
publisher = "Belgrade : Serbian Society for Microscopy, Belgrade : Institute for Biological Research "Siniša Stanković"",
journal = "MCM2019 : proceedings / 14th Multinational Congress on Microscopy, [September 15–20, 2019, Belgrade, Serbia]",
title = "Electrochemical approaches to design materials for potential sensing and energy related applications",
pages = "466-467",
url = "https://hdl.handle.net/21.15107/rcub_dais_7014"
}

Rafailović, L. D., Gammer, C., Trišović, T., Retenberger, C., Jovanović, A. Z., Pašti, I.,& Karnthaler, H.. (2019). Electrochemical approaches to design materials for potential sensing and energy related applications. in MCM2019 : proceedings / 14th Multinational Congress on Microscopy, [September 15–20, 2019, Belgrade, Serbia]
Belgrade : Serbian Society for Microscopy., 466-467.
https://hdl.handle.net/21.15107/rcub_dais_7014

Rafailović LD, Gammer C, Trišović T, Retenberger C, Jovanović AZ, Pašti I, Karnthaler H. Electrochemical approaches to design materials for potential sensing and energy related applications. in MCM2019 : proceedings / 14th Multinational Congress on Microscopy, [September 15–20, 2019, Belgrade, Serbia]. 2019;:466-467.
https://hdl.handle.net/21.15107/rcub_dais_7014 .

Rafailović, Lidija D., Gammer, Christoph, Trišović, Tomislav, Retenberger, Christian, Jovanović, Aleksandar Z., Pašti, Igor, Karnthaler, Hans-Peter, "Electrochemical approaches to design materials for potential sensing and energy related applications" in MCM2019 : proceedings / 14th Multinational Congress on Microscopy, [September 15–20, 2019, Belgrade, Serbia] (2019):466-467,
https://hdl.handle.net/21.15107/rcub_dais_7014 .

TY  - CONF
AU  - Trišović, Tomislav
AU  - Rafailović, Lidija D.
AU  - Grgur, Branimir
AU  - Milojević, Svetomir
AU  - Nikolić, Milan P.
AU  - Trišović, Zaga
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/7016
AB  - Globalno zagrevanje i porast prosečne temperature doveli su do pojave cijanobakterija posebno u stajaćim vodama. Posebnu opasnost za zdravlje su toksini koje ove bakterije proizvode usled neadakvatnog tretmana. Razni toksini mogu izazvati osip na koži, mogu dovesti do raka jetre, a neki od njih su jaki neurotoksini. Iz ovih razloga neophodno je da se cijanobakterije uklone pre nego dodju u pogon finalne prerade vode. Rezultati laboratorijskih ispitivanja na cijanobakterije posle tretmana cevovoda sprovedeni u Zavodu za javno zdravlje Srbije i laboratorija JKP Beogradski vodovod pokazali su posle izvršenih procesa čišćenja, pranja i dezinfekcije znacajno smanjenje broja cijanobakterija. Pokazano je da je KMnO4 efikasno sredstvo za suzbijanje cijanobakterija u koncentraciji do 25 mg/l.
AB  - It was noticed worldwide that nutrient enrichment and climatic change as global warming and hydrologic changes with periods of more intense droughts strongly affect cyanobacterial growth. Toxigenic cyanobacteria that can produce a wide range of cyanotoxins (hepato-, neuro-, dermatotoxins) are one of the major health risks humans and animals are exposed to via drinking water. Therefore, it is important to remove the cyanobacteria before the water comes to a plant for a final treatment. Results of laboratory examination carried out by National Public Health Institution of Serbia and Belgrade Waterworks and Sewerage shows significant reduction of number of cyanobacteria aftre our treatment with KMnO4. The efficiency of the treament is the highest when concentration of KMnO4 was 25 mg/l.
PB  - Čačak : Univerzitet u Kragujevcu, Agronomski fakultet
C3  - Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine
T1  - Pranje i dezinfekcija vodovodne mreže na relaciji Ušće Zemun – Piramida Novi Beograd
T1  - Cleaning and Desinfection a Part of Water Suplly System Ušće Zemun – Piramida New Belgrade
SP  - 827
EP  - 833
UR  - https://hdl.handle.net/21.15107/rcub_dais_7016
ER  - 

@conference{
author = "Trišović, Tomislav and Rafailović, Lidija D. and Grgur, Branimir and Milojević, Svetomir and Nikolić, Milan P. and Trišović, Zaga",
year = "2019",
abstract = "Globalno zagrevanje i porast prosečne temperature doveli su do pojave cijanobakterija posebno u stajaćim vodama. Posebnu opasnost za zdravlje su toksini koje ove bakterije proizvode usled neadakvatnog tretmana. Razni toksini mogu izazvati osip na koži, mogu dovesti do raka jetre, a neki od njih su jaki neurotoksini. Iz ovih razloga neophodno je da se cijanobakterije uklone pre nego dodju u pogon finalne prerade vode. Rezultati laboratorijskih ispitivanja na cijanobakterije posle tretmana cevovoda sprovedeni u Zavodu za javno zdravlje Srbije i laboratorija JKP Beogradski vodovod pokazali su posle izvršenih procesa čišćenja, pranja i dezinfekcije znacajno smanjenje broja cijanobakterija. Pokazano je da je KMnO4 efikasno sredstvo za suzbijanje cijanobakterija u koncentraciji do 25 mg/l., It was noticed worldwide that nutrient enrichment and climatic change as global warming and hydrologic changes with periods of more intense droughts strongly affect cyanobacterial growth. Toxigenic cyanobacteria that can produce a wide range of cyanotoxins (hepato-, neuro-, dermatotoxins) are one of the major health risks humans and animals are exposed to via drinking water. Therefore, it is important to remove the cyanobacteria before the water comes to a plant for a final treatment. Results of laboratory examination carried out by National Public Health Institution of Serbia and Belgrade Waterworks and Sewerage shows significant reduction of number of cyanobacteria aftre our treatment with KMnO4. The efficiency of the treament is the highest when concentration of KMnO4 was 25 mg/l.",
publisher = "Čačak : Univerzitet u Kragujevcu, Agronomski fakultet",
journal = "Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine",
title = "Pranje i dezinfekcija vodovodne mreže na relaciji Ušće Zemun – Piramida Novi Beograd, Cleaning and Desinfection a Part of Water Suplly System Ušće Zemun – Piramida New Belgrade",
pages = "827-833",
url = "https://hdl.handle.net/21.15107/rcub_dais_7016"
}

Trišović, T., Rafailović, L. D., Grgur, B., Milojević, S., Nikolić, M. P.,& Trišović, Z.. (2019). Pranje i dezinfekcija vodovodne mreže na relaciji Ušće Zemun – Piramida Novi Beograd. in Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine
Čačak : Univerzitet u Kragujevcu, Agronomski fakultet., 827-833.
https://hdl.handle.net/21.15107/rcub_dais_7016

Trišović T, Rafailović LD, Grgur B, Milojević S, Nikolić MP, Trišović Z. Pranje i dezinfekcija vodovodne mreže na relaciji Ušće Zemun – Piramida Novi Beograd. in Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine. 2019;:827-833.
https://hdl.handle.net/21.15107/rcub_dais_7016 .

Trišović, Tomislav, Rafailović, Lidija D., Grgur, Branimir, Milojević, Svetomir, Nikolić, Milan P., Trišović, Zaga, "Pranje i dezinfekcija vodovodne mreže na relaciji Ušće Zemun – Piramida Novi Beograd" in Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine (2019):827-833,
https://hdl.handle.net/21.15107/rcub_dais_7016 .

TY  - CONF
AU  - Trišović, Tomislav
AU  - Grgur, Branimir
AU  - Rafailović, Lidija D.
AU  - Popović, Milica
AU  - Trišović, Zaga
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/7019
AB  - U radu je prikazan postupak za čišćenje i dezinfekciju vode u bunarima velikih kapaciteta Beogradskog vodovoda. Tipičan primer bunara velikih kapaciteta je Reni bunar 2 i 4 koji su locirani na 50m od leve obale Save u neposrednoj blizini ušća Save u Dunav. Bunari su dubine oko 30m, prečnika 4 m i sadrže oko 300 m3 vode i sa horizontalnim drenovima dužine 50m. Prezentovan je jednostavan i jeftin način za hiperdezinfekciju bunarskog dna i bunarske vertikale. Takođe je pokušano da se tretiraju i unutrašnjost drenova koji napajaju ovakve bunare.
AB  - We show in this work the treatment procedure utilized for cleaning and desnfection of water in water wells of large capacity as in the case of wells of Belgrade Waterworks. The typical examples of such well of large capacity are Reni wells 2 i 4 located 50m from the left bank of the river Sava and in close geometrical distance of confluence of Save river into the Danube. The depth of wells is around 30 m, diamaeter of around 4 m with approximat content of 300 m3 of water. In this work, we demonstate a simple but innovative approach for the disinfection of the well bottom, vertical areas along the well and inner inlets that pump in the water into the well.
PB  - Čačak : Univerzitet u Kragujevcu, Agronomski fakultet
C3  - Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine
T1  - Hiperdezinfekcija bunara za vodosnabdevanje tipa Reni
T1  - Washing and Desinfection of the Wells Type Reni
SP  - 835
EP  - 844
UR  - https://hdl.handle.net/21.15107/rcub_dais_7019
ER  - 

@conference{
author = "Trišović, Tomislav and Grgur, Branimir and Rafailović, Lidija D. and Popović, Milica and Trišović, Zaga",
year = "2019",
abstract = "U radu je prikazan postupak za čišćenje i dezinfekciju vode u bunarima velikih kapaciteta Beogradskog vodovoda. Tipičan primer bunara velikih kapaciteta je Reni bunar 2 i 4 koji su locirani na 50m od leve obale Save u neposrednoj blizini ušća Save u Dunav. Bunari su dubine oko 30m, prečnika 4 m i sadrže oko 300 m3 vode i sa horizontalnim drenovima dužine 50m. Prezentovan je jednostavan i jeftin način za hiperdezinfekciju bunarskog dna i bunarske vertikale. Takođe je pokušano da se tretiraju i unutrašnjost drenova koji napajaju ovakve bunare., We show in this work the treatment procedure utilized for cleaning and desnfection of water in water wells of large capacity as in the case of wells of Belgrade Waterworks. The typical examples of such well of large capacity are Reni wells 2 i 4 located 50m from the left bank of the river Sava and in close geometrical distance of confluence of Save river into the Danube. The depth of wells is around 30 m, diamaeter of around 4 m with approximat content of 300 m3 of water. In this work, we demonstate a simple but innovative approach for the disinfection of the well bottom, vertical areas along the well and inner inlets that pump in the water into the well.",
publisher = "Čačak : Univerzitet u Kragujevcu, Agronomski fakultet",
journal = "Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine",
title = "Hiperdezinfekcija bunara za vodosnabdevanje tipa Reni, Washing and Desinfection of the Wells Type Reni",
pages = "835-844",
url = "https://hdl.handle.net/21.15107/rcub_dais_7019"
}

Trišović, T., Grgur, B., Rafailović, L. D., Popović, M.,& Trišović, Z.. (2019). Hiperdezinfekcija bunara za vodosnabdevanje tipa Reni. in Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine
Čačak : Univerzitet u Kragujevcu, Agronomski fakultet., 835-844.
https://hdl.handle.net/21.15107/rcub_dais_7019

Trišović T, Grgur B, Rafailović LD, Popović M, Trišović Z. Hiperdezinfekcija bunara za vodosnabdevanje tipa Reni. in Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine. 2019;:835-844.
https://hdl.handle.net/21.15107/rcub_dais_7019 .

Trišović, Tomislav, Grgur, Branimir, Rafailović, Lidija D., Popović, Milica, Trišović, Zaga, "Hiperdezinfekcija bunara za vodosnabdevanje tipa Reni" in Zbornik radova. 2 / XXIV savetovanje o biotehnologiji sa međunarodnim učešćem, Čačak, 15-16. mart 2019. godine (2019):835-844,
https://hdl.handle.net/21.15107/rcub_dais_7019 .

TY  - JOUR
AU  - Spasojević, Miroslav
AU  - Marković, D.
AU  - Trišović, Tomislav
AU  - Spasojević, Milica
PY  - 2018
UR  - https://dais.sanu.ac.rs/123456789/8970
AB  - The effect of chromium(VI) on the kinetics of disproportionation of hypochlorous acid and hypochlorite was established in the solution for the electrolytic production of chlorate. The hexavalent chromium species Cr2O7 2-, HCrO4 - and CrO4 2- present in the solution catalyze the disproportionation reaction. In both the absence and presence of chromium(VI), disproportionation is a third-order reaction with respect to HClO and ClO-P, and a first-order reaction with respect to the hexavalent chromium species. In the presence of chromium(VI) ions, four parallel reactions probably take place in the solution i.e. uncatalyzed disproportionation and three parallel reactions catalyzed by Cr2O7 2-, HCrO4 - and CrO4 2-ions. Most likely, the hexavalent chromium species do not change the sequence of elementary reactions in the disproportionation mechanism but only speed up the rate-determining step through interaction with its reactants. In the chlorate production process, as chromium(VI) concentration increases, the optimum pH which ensures the maximum rate of disproportionation is shifted to an acid environment. This is due to an increase in the concentration of the catalytically most active species HCrO4 - with increasing acidity of the solution. A mathematical model of the kinetics of the chromium(VI)-catalyzed disproportionation of hypochlorite and hypochlorous acid into chlorate was set up. Good agreement was obtained between theoretical and experimental data. © 2018 The Electrochemical Society.
PB  - Pennington N.J. : Electrochemical Society
T2  - Journal of the Electrochemical Society
T1  - Mathematical model of the catalytic effect of chromium(VI) on hypochlorite disproportionation in chlorate electrolysis
SP  - E8
EP  - E19
VL  - 165
IS  - 2
DO  - 10.1149/2.0291802jes
UR  - https://hdl.handle.net/21.15107/rcub_dais_8970
ER  - 

@article{
author = "Spasojević, Miroslav and Marković, D. and Trišović, Tomislav and Spasojević, Milica",
year = "2018",
abstract = "The effect of chromium(VI) on the kinetics of disproportionation of hypochlorous acid and hypochlorite was established in the solution for the electrolytic production of chlorate. The hexavalent chromium species Cr2O7 2-, HCrO4 - and CrO4 2- present in the solution catalyze the disproportionation reaction. In both the absence and presence of chromium(VI), disproportionation is a third-order reaction with respect to HClO and ClO-P, and a first-order reaction with respect to the hexavalent chromium species. In the presence of chromium(VI) ions, four parallel reactions probably take place in the solution i.e. uncatalyzed disproportionation and three parallel reactions catalyzed by Cr2O7 2-, HCrO4 - and CrO4 2-ions. Most likely, the hexavalent chromium species do not change the sequence of elementary reactions in the disproportionation mechanism but only speed up the rate-determining step through interaction with its reactants. In the chlorate production process, as chromium(VI) concentration increases, the optimum pH which ensures the maximum rate of disproportionation is shifted to an acid environment. This is due to an increase in the concentration of the catalytically most active species HCrO4 - with increasing acidity of the solution. A mathematical model of the kinetics of the chromium(VI)-catalyzed disproportionation of hypochlorite and hypochlorous acid into chlorate was set up. Good agreement was obtained between theoretical and experimental data. © 2018 The Electrochemical Society.",
publisher = "Pennington N.J. : Electrochemical Society",
journal = "Journal of the Electrochemical Society",
title = "Mathematical model of the catalytic effect of chromium(VI) on hypochlorite disproportionation in chlorate electrolysis",
pages = "E8-E19",
volume = "165",
number = "2",
doi = "10.1149/2.0291802jes",
url = "https://hdl.handle.net/21.15107/rcub_dais_8970"
}

Spasojević, M., Marković, D., Trišović, T.,& Spasojević, M.. (2018). Mathematical model of the catalytic effect of chromium(VI) on hypochlorite disproportionation in chlorate electrolysis. in Journal of the Electrochemical Society
Pennington N.J. : Electrochemical Society., 165(2), E8-E19.
https://doi.org/10.1149/2.0291802jes
https://hdl.handle.net/21.15107/rcub_dais_8970

Spasojević M, Marković D, Trišović T, Spasojević M. Mathematical model of the catalytic effect of chromium(VI) on hypochlorite disproportionation in chlorate electrolysis. in Journal of the Electrochemical Society. 2018;165(2):E8-E19.
doi:10.1149/2.0291802jes
https://hdl.handle.net/21.15107/rcub_dais_8970 .

Spasojević, Miroslav, Marković, D., Trišović, Tomislav, Spasojević, Milica, "Mathematical model of the catalytic effect of chromium(VI) on hypochlorite disproportionation in chlorate electrolysis" in Journal of the Electrochemical Society, 165, no. 2 (2018):E8-E19,
https://doi.org/10.1149/2.0291802jes .,
https://hdl.handle.net/21.15107/rcub_dais_8970 .

TY  - JOUR
AU  - Spasojević, Miroslav
AU  - Marković, D.
AU  - Trišović, Tomislav
AU  - Spasojević, Milica
PY  - 2018
UR  - https://dais.sanu.ac.rs/123456789/3750
AB  - The effect of chromium(VI) on the kinetics of disproportionation of hypochlorous acid and hypochlorite was established in the solution for the electrolytic production of chlorate. The hexavalent chromium species Cr2O7 2-, HCrO4 - and CrO4 2- present in the solution catalyze the disproportionation reaction. In both the absence and presence of chromium(VI), disproportionation is a third-order reaction with respect to HClO and ClO-P, and a first-order reaction with respect to the hexavalent chromium species. In the presence of chromium(VI) ions, four parallel reactions probably take place in the solution i.e. uncatalyzed disproportionation and three parallel reactions catalyzed by Cr2O7 2-, HCrO4 - and CrO4 2-ions. Most likely, the hexavalent chromium species do not change the sequence of elementary reactions in the disproportionation mechanism but only speed up the rate-determining step through interaction with its reactants. In the chlorate production process, as chromium(VI) concentration increases, the optimum pH which ensures the maximum rate of disproportionation is shifted to an acid environment. This is due to an increase in the concentration of the catalytically most active species HCrO4 - with increasing acidity of the solution. A mathematical model of the kinetics of the chromium(VI)-catalyzed disproportionation of hypochlorite and hypochlorous acid into chlorate was set up. Good agreement was obtained between theoretical and experimental data. © 2018 The Electrochemical Society.
PB  - Pennington N.J. : Electrochemical Society
T2  - Journal of the Electrochemical Society
T1  - Mathematical model of the catalytic effect of chromium(VI) on hypochlorite disproportionation in chlorate electrolysis
SP  - E8
EP  - E19
VL  - 165
IS  - 2
DO  - 10.1149/2.0291802jes
UR  - https://hdl.handle.net/21.15107/rcub_dais_3750
ER  - 

@article{
author = "Spasojević, Miroslav and Marković, D. and Trišović, Tomislav and Spasojević, Milica",
year = "2018",
abstract = "The effect of chromium(VI) on the kinetics of disproportionation of hypochlorous acid and hypochlorite was established in the solution for the electrolytic production of chlorate. The hexavalent chromium species Cr2O7 2-, HCrO4 - and CrO4 2- present in the solution catalyze the disproportionation reaction. In both the absence and presence of chromium(VI), disproportionation is a third-order reaction with respect to HClO and ClO-P, and a first-order reaction with respect to the hexavalent chromium species. In the presence of chromium(VI) ions, four parallel reactions probably take place in the solution i.e. uncatalyzed disproportionation and three parallel reactions catalyzed by Cr2O7 2-, HCrO4 - and CrO4 2-ions. Most likely, the hexavalent chromium species do not change the sequence of elementary reactions in the disproportionation mechanism but only speed up the rate-determining step through interaction with its reactants. In the chlorate production process, as chromium(VI) concentration increases, the optimum pH which ensures the maximum rate of disproportionation is shifted to an acid environment. This is due to an increase in the concentration of the catalytically most active species HCrO4 - with increasing acidity of the solution. A mathematical model of the kinetics of the chromium(VI)-catalyzed disproportionation of hypochlorite and hypochlorous acid into chlorate was set up. Good agreement was obtained between theoretical and experimental data. © 2018 The Electrochemical Society.",
publisher = "Pennington N.J. : Electrochemical Society",
journal = "Journal of the Electrochemical Society",
title = "Mathematical model of the catalytic effect of chromium(VI) on hypochlorite disproportionation in chlorate electrolysis",
pages = "E8-E19",
volume = "165",
number = "2",
doi = "10.1149/2.0291802jes",
url = "https://hdl.handle.net/21.15107/rcub_dais_3750"
}

Spasojević, M., Marković, D., Trišović, T.,& Spasojević, M.. (2018). Mathematical model of the catalytic effect of chromium(VI) on hypochlorite disproportionation in chlorate electrolysis. in Journal of the Electrochemical Society
Pennington N.J. : Electrochemical Society., 165(2), E8-E19.
https://doi.org/10.1149/2.0291802jes
https://hdl.handle.net/21.15107/rcub_dais_3750

Spasojević M, Marković D, Trišović T, Spasojević M. Mathematical model of the catalytic effect of chromium(VI) on hypochlorite disproportionation in chlorate electrolysis. in Journal of the Electrochemical Society. 2018;165(2):E8-E19.
doi:10.1149/2.0291802jes
https://hdl.handle.net/21.15107/rcub_dais_3750 .

Spasojević, Miroslav, Marković, D., Trišović, Tomislav, Spasojević, Milica, "Mathematical model of the catalytic effect of chromium(VI) on hypochlorite disproportionation in chlorate electrolysis" in Journal of the Electrochemical Society, 165, no. 2 (2018):E8-E19,
https://doi.org/10.1149/2.0291802jes .,
https://hdl.handle.net/21.15107/rcub_dais_3750 .

TY  - CONF
AU  - Trišović, Tomislav
AU  - Spasojević, Miroslav
AU  - Maričić, Aleksa
AU  - Spasojević, Milica
PY  - 2018
UR  - https://dais.sanu.ac.rs/123456789/3661
AB  - Nanostructured Ni-Fe-W-Cu alloy powders were electrodeposited from an alkaline ammonium citrate solution on a titanium cathode. Powder particles were dendrite- and cauliflower-shaped. The dendritic particles had a high density of branches made up of interconnected globules. XRD analysis showed that the powder contained an amorphous matrix and FCC nanocrystals of the solid solution of Fe, W and Cu in Ni. As the deposition current density increased, the mean nanocrystal size decreased, and the mean value of internal microstrain and the total weight percent of Fe and Ni in the alloy increased. The powders deposited at higher current densities exhibited higher magnetization. During annealing at temperatures up to 460°C, the powders underwent short-range ordering, which caused an increase in magnetization, whereas at temperatures above 460°C, the magnetization decreased due to the formation of large FCC crystalline grains.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018
T1  - Morphological, microstructural and magnetic characteristics of electrodeposited Ni-Fe-W-Cu alloy powders
SP  - 120
EP  - 120
UR  - https://hdl.handle.net/21.15107/rcub_dais_3661
ER  - 

@conference{
author = "Trišović, Tomislav and Spasojević, Miroslav and Maričić, Aleksa and Spasojević, Milica",
year = "2018",
abstract = "Nanostructured Ni-Fe-W-Cu alloy powders were electrodeposited from an alkaline ammonium citrate solution on a titanium cathode. Powder particles were dendrite- and cauliflower-shaped. The dendritic particles had a high density of branches made up of interconnected globules. XRD analysis showed that the powder contained an amorphous matrix and FCC nanocrystals of the solid solution of Fe, W and Cu in Ni. As the deposition current density increased, the mean nanocrystal size decreased, and the mean value of internal microstrain and the total weight percent of Fe and Ni in the alloy increased. The powders deposited at higher current densities exhibited higher magnetization. During annealing at temperatures up to 460°C, the powders underwent short-range ordering, which caused an increase in magnetization, whereas at temperatures above 460°C, the magnetization decreased due to the formation of large FCC crystalline grains.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018",
title = "Morphological, microstructural and magnetic characteristics of electrodeposited Ni-Fe-W-Cu alloy powders",
pages = "120-120",
url = "https://hdl.handle.net/21.15107/rcub_dais_3661"
}

Trišović, T., Spasojević, M., Maričić, A.,& Spasojević, M.. (2018). Morphological, microstructural and magnetic characteristics of electrodeposited Ni-Fe-W-Cu alloy powders. in Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018
Belgrade : Materials Research Society of Serbia., 120-120.
https://hdl.handle.net/21.15107/rcub_dais_3661

Trišović T, Spasojević M, Maričić A, Spasojević M. Morphological, microstructural and magnetic characteristics of electrodeposited Ni-Fe-W-Cu alloy powders. in Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018. 2018;:120-120.
https://hdl.handle.net/21.15107/rcub_dais_3661 .

Trišović, Tomislav, Spasojević, Miroslav, Maričić, Aleksa, Spasojević, Milica, "Morphological, microstructural and magnetic characteristics of electrodeposited Ni-Fe-W-Cu alloy powders" in Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018 (2018):120-120,
https://hdl.handle.net/21.15107/rcub_dais_3661 .

TY  - CONF
AU  - Džunuzović, Enis S.
AU  - Grgur, Branimir
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
AU  - Gvozdenović, Milica
PY  - 2018
UR  - https://dais.sanu.ac.rs/123456789/14731
AB  - Kopolimerizacija anilina i m-aminobenzoeve kiseline ostvarena je elektrohemijskim postupkom u uslovima konstantne gustine struje od 1,0 mA cm-2 (galvanostatski). Kao elektrolit za sintezu korišćen je vodeni rastvora 1,0 mol dm-3 HCl sa dodatkom anilina i maminobenzoeve kiseline različitog odnosa koncentracija. Prisustvo karboskilne grupe u meta položaju uslovljava povećanje potencijala kopolimerizacije, drugačiju morfologiju i elektrohemijsko ponašanje kopolimera u poređenju sa polianilinom. Kopolimer polianilina i m-aminobenzoeve kiseline dobijen kopolimerizacijom iz rastvora koji je sadržao istu količinu anilina i m-benzoeve kiseline od 1.0 mol dm-3 pokazuje, za razliku od polianilina, elektrohemijsku aktivnost u neutralnoj sredini.
AB  - Galvanostatic electrochemical syntheses of poly(aniline-co-(m-aminobenzoic acid)) was performed at graphite electrode at constant current density of 1.0 mA cm-2. Aqueous electrolyte used for synthesis was consisted of: 1.0 mol dm-3 HCl and different amounts of aniline and m-aminobenzoic acid. The presence of the meta positioned carboxylic group in m-aminobenzoic acid had influenced higher co-polymerization potential, different morphology and electrochemical behavior of copolymers compared to polyaniline. Poly(aniline-co-(m-aminobenzoic acid)) obtained from electrolyte with an equal amount of aniline and m-aminobenzoic acid exhibits electrochemical activity in neutral electrolyte which can be related to proton exchange process.
PB  - Beograd : Srpsko hemijsko društvo
C3  - Kratki izvodi radova = Book of Abstracts / 55. savetovanje Srpskog hemijskog društva, Novi Sad 8. i 9. juni 2018 = 55th meeting of the Serbian chemical society, Novi Sad, Serbia, June 8-9, 2018
T1  - Elektrohemijska sinteza i karakterizacija kopolimera polianilina i maminobenzoeve kiseline
T1  - Electrochemical synthesis and characterization of poly(aniline-co-(maminobenzoic acid)
UR  - https://hdl.handle.net/21.15107/rcub_dais_14731
ER  - 

@conference{
author = "Džunuzović, Enis S. and Grgur, Branimir and Jugović, Branimir and Trišović, Tomislav and Stevanović, Jasmina and Gvozdenović, Milica",
year = "2018",
abstract = "Kopolimerizacija anilina i m-aminobenzoeve kiseline ostvarena je elektrohemijskim postupkom u uslovima konstantne gustine struje od 1,0 mA cm-2 (galvanostatski). Kao elektrolit za sintezu korišćen je vodeni rastvora 1,0 mol dm-3 HCl sa dodatkom anilina i maminobenzoeve kiseline različitog odnosa koncentracija. Prisustvo karboskilne grupe u meta položaju uslovljava povećanje potencijala kopolimerizacije, drugačiju morfologiju i elektrohemijsko ponašanje kopolimera u poređenju sa polianilinom. Kopolimer polianilina i m-aminobenzoeve kiseline dobijen kopolimerizacijom iz rastvora koji je sadržao istu količinu anilina i m-benzoeve kiseline od 1.0 mol dm-3 pokazuje, za razliku od polianilina, elektrohemijsku aktivnost u neutralnoj sredini., Galvanostatic electrochemical syntheses of poly(aniline-co-(m-aminobenzoic acid)) was performed at graphite electrode at constant current density of 1.0 mA cm-2. Aqueous electrolyte used for synthesis was consisted of: 1.0 mol dm-3 HCl and different amounts of aniline and m-aminobenzoic acid. The presence of the meta positioned carboxylic group in m-aminobenzoic acid had influenced higher co-polymerization potential, different morphology and electrochemical behavior of copolymers compared to polyaniline. Poly(aniline-co-(m-aminobenzoic acid)) obtained from electrolyte with an equal amount of aniline and m-aminobenzoic acid exhibits electrochemical activity in neutral electrolyte which can be related to proton exchange process.",
publisher = "Beograd : Srpsko hemijsko društvo",
journal = "Kratki izvodi radova = Book of Abstracts / 55. savetovanje Srpskog hemijskog društva, Novi Sad 8. i 9. juni 2018 = 55th meeting of the Serbian chemical society, Novi Sad, Serbia, June 8-9, 2018",
title = "Elektrohemijska sinteza i karakterizacija kopolimera polianilina i maminobenzoeve kiseline, Electrochemical synthesis and characterization of poly(aniline-co-(maminobenzoic acid)",
url = "https://hdl.handle.net/21.15107/rcub_dais_14731"
}

Džunuzović, E. S., Grgur, B., Jugović, B., Trišović, T., Stevanović, J.,& Gvozdenović, M.. (2018). Elektrohemijska sinteza i karakterizacija kopolimera polianilina i maminobenzoeve kiseline. in Kratki izvodi radova = Book of Abstracts / 55. savetovanje Srpskog hemijskog društva, Novi Sad 8. i 9. juni 2018 = 55th meeting of the Serbian chemical society, Novi Sad, Serbia, June 8-9, 2018
Beograd : Srpsko hemijsko društvo..
https://hdl.handle.net/21.15107/rcub_dais_14731

Džunuzović ES, Grgur B, Jugović B, Trišović T, Stevanović J, Gvozdenović M. Elektrohemijska sinteza i karakterizacija kopolimera polianilina i maminobenzoeve kiseline. in Kratki izvodi radova = Book of Abstracts / 55. savetovanje Srpskog hemijskog društva, Novi Sad 8. i 9. juni 2018 = 55th meeting of the Serbian chemical society, Novi Sad, Serbia, June 8-9, 2018. 2018;.
https://hdl.handle.net/21.15107/rcub_dais_14731 .

Džunuzović, Enis S., Grgur, Branimir, Jugović, Branimir, Trišović, Tomislav, Stevanović, Jasmina, Gvozdenović, Milica, "Elektrohemijska sinteza i karakterizacija kopolimera polianilina i maminobenzoeve kiseline" in Kratki izvodi radova = Book of Abstracts / 55. savetovanje Srpskog hemijskog društva, Novi Sad 8. i 9. juni 2018 = 55th meeting of the Serbian chemical society, Novi Sad, Serbia, June 8-9, 2018 (2018),
https://hdl.handle.net/21.15107/rcub_dais_14731 .

TY  - JOUR
AU  - Jokić, Bojan
AU  - Džunuzovic, Enis
AU  - Grgur, Branimir
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina S.
AU  - Gvozdenovic, Milica M.
PY  - 2017
UR  - https://dais.sanu.ac.rs/123456789/4843
AB  - Poly(aniline-co-(m-aminobenzoic acid)) was synthesized electrochemically at graphite electrode under galvanostatic conditions. Aqueous electrolyte for synthesis was consisted of HCl and different amount of aniline and m-aminobenzoic acid. The presence of the meta positioned carboxylic group in m-aminobenzoic acid influenced higher co-polymerization potential, different morphology and electrochemical behavior of copolymers compared to polyaniline. Electrochemical activity is achieved by proton exchange in neutral environment that can result in a faster charge/discharge process, which is in the case of PANI limited by slow anion exchange, making this material promising for consideration in super-capacitors and in biological system.
PB  - Springer, Dordrecht
T2  - Journal of Polymer Research
T1  - The influence of m-aminobenzoic acid on electrochemical synthesis and behavior of poly(aniline-co-(m-aminobenzoic acid)
SP  - 146
VL  - 24
IS  - 9
DO  - 10.1007/s10965-017-1313-5
UR  - https://hdl.handle.net/21.15107/rcub_dais_4843
ER  - 

@article{
author = "Jokić, Bojan and Džunuzovic, Enis and Grgur, Branimir and Jugović, Branimir and Trišović, Tomislav and Stevanović, Jasmina S. and Gvozdenovic, Milica M.",
year = "2017",
abstract = "Poly(aniline-co-(m-aminobenzoic acid)) was synthesized electrochemically at graphite electrode under galvanostatic conditions. Aqueous electrolyte for synthesis was consisted of HCl and different amount of aniline and m-aminobenzoic acid. The presence of the meta positioned carboxylic group in m-aminobenzoic acid influenced higher co-polymerization potential, different morphology and electrochemical behavior of copolymers compared to polyaniline. Electrochemical activity is achieved by proton exchange in neutral environment that can result in a faster charge/discharge process, which is in the case of PANI limited by slow anion exchange, making this material promising for consideration in super-capacitors and in biological system.",
publisher = "Springer, Dordrecht",
journal = "Journal of Polymer Research",
title = "The influence of m-aminobenzoic acid on electrochemical synthesis and behavior of poly(aniline-co-(m-aminobenzoic acid)",
pages = "146",
volume = "24",
number = "9",
doi = "10.1007/s10965-017-1313-5",
url = "https://hdl.handle.net/21.15107/rcub_dais_4843"
}

Jokić, B., Džunuzovic, E., Grgur, B., Jugović, B., Trišović, T., Stevanović, J. S.,& Gvozdenovic, M. M.. (2017). The influence of m-aminobenzoic acid on electrochemical synthesis and behavior of poly(aniline-co-(m-aminobenzoic acid). in Journal of Polymer Research
Springer, Dordrecht., 24(9), 146.
https://doi.org/10.1007/s10965-017-1313-5
https://hdl.handle.net/21.15107/rcub_dais_4843

Jokić B, Džunuzovic E, Grgur B, Jugović B, Trišović T, Stevanović JS, Gvozdenovic MM. The influence of m-aminobenzoic acid on electrochemical synthesis and behavior of poly(aniline-co-(m-aminobenzoic acid). in Journal of Polymer Research. 2017;24(9):146.
doi:10.1007/s10965-017-1313-5
https://hdl.handle.net/21.15107/rcub_dais_4843 .

Jokić, Bojan, Džunuzovic, Enis, Grgur, Branimir, Jugović, Branimir, Trišović, Tomislav, Stevanović, Jasmina S., Gvozdenovic, Milica M., "The influence of m-aminobenzoic acid on electrochemical synthesis and behavior of poly(aniline-co-(m-aminobenzoic acid)" in Journal of Polymer Research, 24, no. 9 (2017):146,
https://doi.org/10.1007/s10965-017-1313-5 .,
https://hdl.handle.net/21.15107/rcub_dais_4843 .

TY  - JOUR
AU  - Trišović, Tomislav
AU  - Spasojević, Miroslav D.
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Rafailović, Lidija D.
PY  - 2016
UR  - https://dais.sanu.ac.rs/123456789/2326
AB  - The most common disinfectants for water treatment are based on chlorine and its compounds. Practically, water treatments with chlorine compounds have no alternative, since they provide, in comparison to other effective processes such as ozonization or ultraviolet irradiation, high residual disinfection capacity. Unfortunately, all of chlorine-based compounds for disinfection tend to degrade during storage, thus reducing the concentration of active chlorine. Apart from degradation, additional problems are transportation, storage and handling of such hazardous compounds. Nowadays, a lot of attention is paid to the development of electrochemical devices for in situ production of chlorine dioxide or sodium hypochlorite as efficient disinfectants for water treatment. The most important part of such a device is the electrochemical reactor. Electrochemical reactor uses external source of direct current in order to produce disinfectants in electrochemical reactions occurring at the electrodes. Construction of an electrochemical device for water treatment is based on evaluation of optimal conditions for electrochemical reactions during continues production of disinfectants. The aim of this study was to develop a low-cost electrochemical device for the production of disinfectant, active chlorine, at the place of its usage, based on newly developed technical solutions and newest commercial components. The projected electrochemical device was constructed and mounted, and its operation was investigated. Investigations involved both functionality of individual components and device in general. The major goal of these investigations was to achieve maximal efficiency in extreme condition of elevated room temperature and humidity with a novel device construction involving coaxial heat exchanger at the solution inlet. Room operation of the proposed device was investigated when relative humidity was set to 90% and the ambient temperature of 38°C. The obtained results in such extreme operation conditions reveled that it was possible to obtain required concentration of 0.85% of active chlorine with maximal temperature of outlet electrolyte of 35.3°C, which is within the limits of optimal temperatures.
PB  - Association of the Chemical Engineers of Serbia
T2  - Hemijska industrija
T1  - Automatic devices for electrochemical water treatment with cooling of electrolyte
SP  - 201
EP  - 207
VL  - 70
IS  - 2
DO  - 10.2298/HEMIND140822026T
UR  - https://hdl.handle.net/21.15107/rcub_dais_2326
ER  - 

@article{
author = "Trišović, Tomislav and Spasojević, Miroslav D. and Gvozdenović, Milica M. and Jugović, Branimir and Rafailović, Lidija D.",
year = "2016",
abstract = "The most common disinfectants for water treatment are based on chlorine and its compounds. Practically, water treatments with chlorine compounds have no alternative, since they provide, in comparison to other effective processes such as ozonization or ultraviolet irradiation, high residual disinfection capacity. Unfortunately, all of chlorine-based compounds for disinfection tend to degrade during storage, thus reducing the concentration of active chlorine. Apart from degradation, additional problems are transportation, storage and handling of such hazardous compounds. Nowadays, a lot of attention is paid to the development of electrochemical devices for in situ production of chlorine dioxide or sodium hypochlorite as efficient disinfectants for water treatment. The most important part of such a device is the electrochemical reactor. Electrochemical reactor uses external source of direct current in order to produce disinfectants in electrochemical reactions occurring at the electrodes. Construction of an electrochemical device for water treatment is based on evaluation of optimal conditions for electrochemical reactions during continues production of disinfectants. The aim of this study was to develop a low-cost electrochemical device for the production of disinfectant, active chlorine, at the place of its usage, based on newly developed technical solutions and newest commercial components. The projected electrochemical device was constructed and mounted, and its operation was investigated. Investigations involved both functionality of individual components and device in general. The major goal of these investigations was to achieve maximal efficiency in extreme condition of elevated room temperature and humidity with a novel device construction involving coaxial heat exchanger at the solution inlet. Room operation of the proposed device was investigated when relative humidity was set to 90% and the ambient temperature of 38°C. The obtained results in such extreme operation conditions reveled that it was possible to obtain required concentration of 0.85% of active chlorine with maximal temperature of outlet electrolyte of 35.3°C, which is within the limits of optimal temperatures.",
publisher = "Association of the Chemical Engineers of Serbia",
journal = "Hemijska industrija",
title = "Automatic devices for electrochemical water treatment with cooling of electrolyte",
pages = "201-207",
volume = "70",
number = "2",
doi = "10.2298/HEMIND140822026T",
url = "https://hdl.handle.net/21.15107/rcub_dais_2326"
}

Trišović, T., Spasojević, M. D., Gvozdenović, M. M., Jugović, B.,& Rafailović, L. D.. (2016). Automatic devices for electrochemical water treatment with cooling of electrolyte. in Hemijska industrija
Association of the Chemical Engineers of Serbia., 70(2), 201-207.
https://doi.org/10.2298/HEMIND140822026T
https://hdl.handle.net/21.15107/rcub_dais_2326

Trišović T, Spasojević MD, Gvozdenović MM, Jugović B, Rafailović LD. Automatic devices for electrochemical water treatment with cooling of electrolyte. in Hemijska industrija. 2016;70(2):201-207.
doi:10.2298/HEMIND140822026T
https://hdl.handle.net/21.15107/rcub_dais_2326 .

Trišović, Tomislav, Spasojević, Miroslav D., Gvozdenović, Milica M., Jugović, Branimir, Rafailović, Lidija D., "Automatic devices for electrochemical water treatment with cooling of electrolyte" in Hemijska industrija, 70, no. 2 (2016):201-207,
https://doi.org/10.2298/HEMIND140822026T .,
https://hdl.handle.net/21.15107/rcub_dais_2326 .

TY  - JOUR
AU  - Omymen, Waleed M.
AU  - Ebshish, Ali S.
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Gvozdenović, Milica M.
AU  - Grgur, Branimir
PY  - 2016
UR  - https://dais.sanu.ac.rs/123456789/15997
AB  - The fast reaction of forced hydrolysis of iron(III) nitrate in hypochlorite solution at room temperature, leads to the formation of mainly hematite, α-Fe2O3. Successive ion adsorption and reaction (SILAR) is applied to decorate an electrochemically formed TiO2 nanotube electrode. The anodic photoelectrochemical behavior of pure TiO2-NT’s and modified electrodes are investigated in a sulfate containing solution at pH = 9.2. It is shown that such a modification leads to an increase of anodic photoactivity, as well as that at the same current density, the photoelectrochemical cell with a modified electrode operates at a voltage lower by 0.7 V. The band gap and flat band potentials are estimated, and the structure of the band gap and possible charge transfer reactions and mechanism are discussed.
PB  - Elsevier
T2  - Electrochimica Acta
T1  - Photoelectochemical behavior of TiO2-NT’s modified with SILAR deposited iron oxide
SP  - 136
EP  - 143
VL  - 203
DO  - 10.1016/j.electacta.2016.04.038
UR  - https://hdl.handle.net/21.15107/rcub_dais_15997
ER  - 

@article{
author = "Omymen, Waleed M. and Ebshish, Ali S. and Jugović, Branimir and Trišović, Tomislav and Gvozdenović, Milica M. and Grgur, Branimir",
year = "2016",
abstract = "The fast reaction of forced hydrolysis of iron(III) nitrate in hypochlorite solution at room temperature, leads to the formation of mainly hematite, α-Fe2O3. Successive ion adsorption and reaction (SILAR) is applied to decorate an electrochemically formed TiO2 nanotube electrode. The anodic photoelectrochemical behavior of pure TiO2-NT’s and modified electrodes are investigated in a sulfate containing solution at pH = 9.2. It is shown that such a modification leads to an increase of anodic photoactivity, as well as that at the same current density, the photoelectrochemical cell with a modified electrode operates at a voltage lower by 0.7 V. The band gap and flat band potentials are estimated, and the structure of the band gap and possible charge transfer reactions and mechanism are discussed.",
publisher = "Elsevier",
journal = "Electrochimica Acta",
title = "Photoelectochemical behavior of TiO2-NT’s modified with SILAR deposited iron oxide",
pages = "136-143",
volume = "203",
doi = "10.1016/j.electacta.2016.04.038",
url = "https://hdl.handle.net/21.15107/rcub_dais_15997"
}

Omymen, W. M., Ebshish, A. S., Jugović, B., Trišović, T., Gvozdenović, M. M.,& Grgur, B.. (2016). Photoelectochemical behavior of TiO2-NT’s modified with SILAR deposited iron oxide. in Electrochimica Acta
Elsevier., 203, 136-143.
https://doi.org/10.1016/j.electacta.2016.04.038
https://hdl.handle.net/21.15107/rcub_dais_15997

Omymen WM, Ebshish AS, Jugović B, Trišović T, Gvozdenović MM, Grgur B. Photoelectochemical behavior of TiO2-NT’s modified with SILAR deposited iron oxide. in Electrochimica Acta. 2016;203:136-143.
doi:10.1016/j.electacta.2016.04.038
https://hdl.handle.net/21.15107/rcub_dais_15997 .

Omymen, Waleed M., Ebshish, Ali S., Jugović, Branimir, Trišović, Tomislav, Gvozdenović, Milica M., Grgur, Branimir, "Photoelectochemical behavior of TiO2-NT’s modified with SILAR deposited iron oxide" in Electrochimica Acta, 203 (2016):136-143,
https://doi.org/10.1016/j.electacta.2016.04.038 .,
https://hdl.handle.net/21.15107/rcub_dais_15997 .

TY  - JOUR
AU  - Rafailović, Lidija D.
AU  - Gammer, Christoph
AU  - Srajer, J.
AU  - Trišović, Tomislav
AU  - Rahel, J.
AU  - Karnthaler, Hans-Peter
PY  - 2016
UR  - https://dais.sanu.ac.rs/123456789/2323
AB  - We present the application of newly developed Ag nanodendrites (Ag-ND) grown together with anodic aluminium oxide for surface-enhanced Raman scattering (SERS). The Ag-ND yield very pronounced SERS using a self-assembled monolayer (SAM). This is confirmed by simulations showing hot spots in the electromagnetic field at the surfaces of the Ag-ND. SERS measurements reusing Ag-ND demonstrate its long-term stability even after one year.
PB  - Royal Society of Chemistry
T2  - RSC Advances
T1  - Surface enhanced Raman scattering of dendritic Ag nanostructures grown with anodic aluminium oxide
SP  - 33348
EP  - 33352
VL  - 6
DO  - 10.1039/C5RA26632G
UR  - https://hdl.handle.net/21.15107/rcub_dais_2323
ER  - 

@article{
author = "Rafailović, Lidija D. and Gammer, Christoph and Srajer, J. and Trišović, Tomislav and Rahel, J. and Karnthaler, Hans-Peter",
year = "2016",
abstract = "We present the application of newly developed Ag nanodendrites (Ag-ND) grown together with anodic aluminium oxide for surface-enhanced Raman scattering (SERS). The Ag-ND yield very pronounced SERS using a self-assembled monolayer (SAM). This is confirmed by simulations showing hot spots in the electromagnetic field at the surfaces of the Ag-ND. SERS measurements reusing Ag-ND demonstrate its long-term stability even after one year.",
publisher = "Royal Society of Chemistry",
journal = "RSC Advances",
title = "Surface enhanced Raman scattering of dendritic Ag nanostructures grown with anodic aluminium oxide",
pages = "33348-33352",
volume = "6",
doi = "10.1039/C5RA26632G",
url = "https://hdl.handle.net/21.15107/rcub_dais_2323"
}

Rafailović, L. D., Gammer, C., Srajer, J., Trišović, T., Rahel, J.,& Karnthaler, H.. (2016). Surface enhanced Raman scattering of dendritic Ag nanostructures grown with anodic aluminium oxide. in RSC Advances
Royal Society of Chemistry., 6, 33348-33352.
https://doi.org/10.1039/C5RA26632G
https://hdl.handle.net/21.15107/rcub_dais_2323

Rafailović LD, Gammer C, Srajer J, Trišović T, Rahel J, Karnthaler H. Surface enhanced Raman scattering of dendritic Ag nanostructures grown with anodic aluminium oxide. in RSC Advances. 2016;6:33348-33352.
doi:10.1039/C5RA26632G
https://hdl.handle.net/21.15107/rcub_dais_2323 .

Rafailović, Lidija D., Gammer, Christoph, Srajer, J., Trišović, Tomislav, Rahel, J., Karnthaler, Hans-Peter, "Surface enhanced Raman scattering of dendritic Ag nanostructures grown with anodic aluminium oxide" in RSC Advances, 6 (2016):33348-33352,
https://doi.org/10.1039/C5RA26632G .,
https://hdl.handle.net/21.15107/rcub_dais_2323 .