Pavlović, Vladimir B.

Link to this page

Authority KeyName Variants
orcid::0000-0002-1138-0331
  • Pavlović, Vladimir B. (240)
  • Pavlović, Vladimir B (2)
Projects
Directed synthesis, structure and properties of multifunctional materials United States National Aeronautics and Space Administration (NASA), Grant NNX09AV07A
United States National Science Foundation (NSF) / Centers of Research Excellence in Science and Technology (CREST), Grant HRD-0833184 Investigation of the relation in triad: Synthesis structure-properties for functional materials
United States National Science Foundation (NSF) / Partnerships for Research and Education in Materials (PREM), Grant 1523617 Development and application of multifunctional materials using domestic raw materials in upgraded processing lines
Synthesis, processing and characterization of nanostructured materials for application in the field of energy, mechanical engineering, environmental protection and biomedicine Zero- to Three-Dimensional Nanostructures for Application in Electronics and Renewable Energy Sources: Synthesis, Characterization and Processing
Lithium-ion batteries and fuel cells - research and development Synthesis, processing and applications of nanostructured multifunctional materials with defined properties
Size-, shape- and structure- dependent properties of nanoparticles and nanocomposites Molecular designing of nanoparticles with controlled morphological and physicochemical characteristics and functional materials based on them
Functional, Functionalized and Advanced Nanomaterials Ministry of Education, Youth and Sports (MEYS) of Czech Republic - CEITEC 2020 [LQ1601]
Serbian Academy of Sciences and Arts, Project F-198 Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200175 (Institute of Technical Sciences of SASA, Belgrade)
Bilateral cooperation between Serbia and France, No. 4510339/2016/09/03 “Inteligent econanomaterials and nanocomposites” Grant Agency of the Czech Republic, Project 15-06390S
Materials of Reduced Dimensions for Efficient Light Harvesting and Energy conversion National Science Foundation, North Carolina State University, Project No. HRD-1345219
Czech Science Foundation (GACR) - 17-05620S Investigation of intermetallics and semiconductors and possible application in renewable energy sources
Investigation of the effect of parameters of synthesis and processing on dielectric, optical and magnetic properties, both bulk and surface of crystal and polymeric systems Geologic and ecotoxicologic research in identification of geopathogen zones of toxic elements in drinking water reservoirs- research into methods and procedures for reduction of biochemical anomalies
Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200026 (University of Belgrade, Institute of Chemistry, Technology and Metallurgy - IChTM) Algorithms and software for frequency-domain and time-domain simulations of RF subsystems and electromagnetic sensors in ICT
Serbian Academy of Sciences and Arts, Project F-178 COST Action CM1302 - European Network on Smart Inorganic Polymers (SIPs)
EU Operational Programme Competitiveness and Cohesion European Structural and Investment Funds (2014-2020), “Modification of cheese ripening process and development of whey based products - SIRENA”

Author's Bibliography

Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction

Filipović, Suzana; Obradović, Nina; Anđelković, Ljubica; Olćan, Dragan; Petrović, Jovana; Mirković, Miljana; Pavlović, Vladimir B.; Jeremić, Dejan; Vlahović, Branislav; Đorđević, Antonije

(Belgrade : International Institute for the Science of Sintering, 2021)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Anđelković, Ljubica
AU  - Olćan, Dragan
AU  - Petrović, Jovana
AU  - Mirković, Miljana
AU  - Pavlović, Vladimir B.
AU  - Jeremić, Dejan
AU  - Vlahović, Branislav
AU  - Đorđević, Antonije
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11230
AB  - Solid-state reaction between BaTiO3 and Fe2O3 was used to produce a multiferroic heterostructure composite. Commercial BaTiO3 and Fe(NO3)3•9H2O were suspended in ethanol for 30 minutes in an ultrasound bath. The prepared mixture was thermally processed at 300 oC for 6 h. Sintering at 1300 oC for 1 h resulted in a mixture of different phases, BaTiO3, BaFe12O19 and Ba12Ti28Fe15O84, which were confirmed by x-ray powder diffraction. A dense microstructure with a small volume fraction of closed porosity was indicated by the scanning electron microscopy, while a homogeneous distribution of Fe ions over BaTiO3 phase was visible from energy dispersive spectroscopy mapping. Doping of BaTiO3 with Fe2O3 resulted in formation of magnetic hexaferrite phases, as confirmed by dielectric measurements that showed a broadened maximum of the permittivity measured as a function of temperature.
PB  - Belgrade : International Institute for the Science of Sintering
T2  - Science of Sintering
T1  - Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction
SP  - 1
EP  - 8
VL  - 53
DO  - 10.2298/SOS2101001F
UR  - https://hdl.handle.net/21.15107/rcub_dais_11230
ER  - 
@article{
author = "Filipović, Suzana and Obradović, Nina and Anđelković, Ljubica and Olćan, Dragan and Petrović, Jovana and Mirković, Miljana and Pavlović, Vladimir B. and Jeremić, Dejan and Vlahović, Branislav and Đorđević, Antonije",
year = "2021",
abstract = "Solid-state reaction between BaTiO3 and Fe2O3 was used to produce a multiferroic heterostructure composite. Commercial BaTiO3 and Fe(NO3)3•9H2O were suspended in ethanol for 30 minutes in an ultrasound bath. The prepared mixture was thermally processed at 300 oC for 6 h. Sintering at 1300 oC for 1 h resulted in a mixture of different phases, BaTiO3, BaFe12O19 and Ba12Ti28Fe15O84, which were confirmed by x-ray powder diffraction. A dense microstructure with a small volume fraction of closed porosity was indicated by the scanning electron microscopy, while a homogeneous distribution of Fe ions over BaTiO3 phase was visible from energy dispersive spectroscopy mapping. Doping of BaTiO3 with Fe2O3 resulted in formation of magnetic hexaferrite phases, as confirmed by dielectric measurements that showed a broadened maximum of the permittivity measured as a function of temperature.",
publisher = "Belgrade : International Institute for the Science of Sintering",
journal = "Science of Sintering",
title = "Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction",
pages = "1-8",
volume = "53",
doi = "10.2298/SOS2101001F",
url = "https://hdl.handle.net/21.15107/rcub_dais_11230"
}
Filipović, S., Obradović, N., Anđelković, L., Olćan, D., Petrović, J., Mirković, M., Pavlović, V. B., Jeremić, D., Vlahović, B.,& Đorđević, A.. (2021). Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction. in Science of Sintering
Belgrade : International Institute for the Science of Sintering., 53, 1-8.
https://doi.org/10.2298/SOS2101001F
https://hdl.handle.net/21.15107/rcub_dais_11230
Filipović S, Obradović N, Anđelković L, Olćan D, Petrović J, Mirković M, Pavlović VB, Jeremić D, Vlahović B, Đorđević A. Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction. in Science of Sintering. 2021;53:1-8.
doi:10.2298/SOS2101001F
https://hdl.handle.net/21.15107/rcub_dais_11230 .
Filipović, Suzana, Obradović, Nina, Anđelković, Ljubica, Olćan, Dragan, Petrović, Jovana, Mirković, Miljana, Pavlović, Vladimir B., Jeremić, Dejan, Vlahović, Branislav, Đorđević, Antonije, "Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction" in Science of Sintering, 53 (2021):1-8,
https://doi.org/10.2298/SOS2101001F .,
https://hdl.handle.net/21.15107/rcub_dais_11230 .

PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix

Pavlović, Vera P.; Tošić, Dragana; Dojčilović, Radovan; Dudić, Duško; Dramićanin, Miroslav D.; Medić, Mina; McPherson, Michael M.; Pavlović, Vladimir B.; Vlahović, Branislav; Đoković, Vladimir

(Elsevier BV, 2021)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Tošić, Dragana
AU  - Dojčilović, Radovan
AU  - Dudić, Duško
AU  - Dramićanin, Miroslav D.
AU  - Medić, Mina
AU  - McPherson, Michael M.
AU  - Pavlović, Vladimir B.
AU  - Vlahović, Branislav
AU  - Đoković, Vladimir
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/10535
AB  - Na0.25K0.25Bi0.5TiO3 (NKBT) perovskite particles are synthesized by solid-state method and used as a filler for polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) co-polymer. X-ray diffraction analysis of NKBT powders shows that the particles have a rhombohedral perovskite crystal structure (R3c symmetry). Raman spectroscopy reveals that the co-polymer crystallizes predominantly into the mixture of polar β- and γ-crystals, while there is also a contribution of the non-polar α-crystal phase. The introduction of the NKBT into the PVDF-HFP results with an increase in effective dielectric permittivity and this effect depends on the inorganic content in the composite. The most interesting result of the present study is that the introduction of NKBT particles induces the appearance of an additional transition peak in the dielectric spectra of the co-polymer matrix. At the fixed frequency of ~2 kHz, the observed process appears at ~10 °C (about 45° above the glass transition temperature) and its magnitude strongly depends on the amount of the NKBT in the composite. Dielectric spectroscopy measurements of the composites are carried out in the wide range of frequencies (from 0.1 Hz to 1 MHz) and temperatures (from −100 to 100 °C). They reveal that the novel process can be clearly distinguished in the frequency range between 160 Hz and ~50 kHz.
PB  - Elsevier BV
T2  - Polymer Testing
T1  - PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix
SP  - 107093
VL  - 96
DO  - 10.1016/j.polymertesting.2021.107093
UR  - https://hdl.handle.net/21.15107/rcub_dais_10535
ER  - 
@article{
author = "Pavlović, Vera P. and Tošić, Dragana and Dojčilović, Radovan and Dudić, Duško and Dramićanin, Miroslav D. and Medić, Mina and McPherson, Michael M. and Pavlović, Vladimir B. and Vlahović, Branislav and Đoković, Vladimir",
year = "2021",
abstract = "Na0.25K0.25Bi0.5TiO3 (NKBT) perovskite particles are synthesized by solid-state method and used as a filler for polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) co-polymer. X-ray diffraction analysis of NKBT powders shows that the particles have a rhombohedral perovskite crystal structure (R3c symmetry). Raman spectroscopy reveals that the co-polymer crystallizes predominantly into the mixture of polar β- and γ-crystals, while there is also a contribution of the non-polar α-crystal phase. The introduction of the NKBT into the PVDF-HFP results with an increase in effective dielectric permittivity and this effect depends on the inorganic content in the composite. The most interesting result of the present study is that the introduction of NKBT particles induces the appearance of an additional transition peak in the dielectric spectra of the co-polymer matrix. At the fixed frequency of ~2 kHz, the observed process appears at ~10 °C (about 45° above the glass transition temperature) and its magnitude strongly depends on the amount of the NKBT in the composite. Dielectric spectroscopy measurements of the composites are carried out in the wide range of frequencies (from 0.1 Hz to 1 MHz) and temperatures (from −100 to 100 °C). They reveal that the novel process can be clearly distinguished in the frequency range between 160 Hz and ~50 kHz.",
publisher = "Elsevier BV",
journal = "Polymer Testing",
title = "PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix",
pages = "107093",
volume = "96",
doi = "10.1016/j.polymertesting.2021.107093",
url = "https://hdl.handle.net/21.15107/rcub_dais_10535"
}
Pavlović, V. P., Tošić, D., Dojčilović, R., Dudić, D., Dramićanin, M. D., Medić, M., McPherson, M. M., Pavlović, V. B., Vlahović, B.,& Đoković, V.. (2021). PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix. in Polymer Testing
Elsevier BV., 96, 107093.
https://doi.org/10.1016/j.polymertesting.2021.107093
https://hdl.handle.net/21.15107/rcub_dais_10535
Pavlović VP, Tošić D, Dojčilović R, Dudić D, Dramićanin MD, Medić M, McPherson MM, Pavlović VB, Vlahović B, Đoković V. PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix. in Polymer Testing. 2021;96:107093.
doi:10.1016/j.polymertesting.2021.107093
https://hdl.handle.net/21.15107/rcub_dais_10535 .
Pavlović, Vera P., Tošić, Dragana, Dojčilović, Radovan, Dudić, Duško, Dramićanin, Miroslav D., Medić, Mina, McPherson, Michael M., Pavlović, Vladimir B., Vlahović, Branislav, Đoković, Vladimir, "PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix" in Polymer Testing, 96 (2021):107093,
https://doi.org/10.1016/j.polymertesting.2021.107093 .,
https://hdl.handle.net/21.15107/rcub_dais_10535 .
1
1

The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods

Šuljagić, Marija; Vulić, Predrag; Jeremić, Dejan; Pavlović, Vladimir B.; Filipović, Suzana; Kilanski, Lukasz; Lewinska, Sabina; Slawska-Waniewska, Anna; Milenković, Milica; Nikolić, Aleksandar S.; Anđelković, Ljubica

(Elsevier, 2021)

TY  - JOUR
AU  - Šuljagić, Marija
AU  - Vulić, Predrag
AU  - Jeremić, Dejan
AU  - Pavlović, Vladimir B.
AU  - Filipović, Suzana
AU  - Kilanski, Lukasz
AU  - Lewinska, Sabina
AU  - Slawska-Waniewska, Anna
AU  - Milenković, Milica
AU  - Nikolić, Aleksandar S.
AU  - Anđelković, Ljubica
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/9515
AB  - To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.
PB  - Elsevier
T2  - Materials Research Bulletin
T1  - The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods
SP  - 111117
VL  - 134
DO  - 10.1016/j.materresbull.2020.111117
UR  - https://hdl.handle.net/21.15107/rcub_dais_9515
ER  - 
@article{
author = "Šuljagić, Marija and Vulić, Predrag and Jeremić, Dejan and Pavlović, Vladimir B. and Filipović, Suzana and Kilanski, Lukasz and Lewinska, Sabina and Slawska-Waniewska, Anna and Milenković, Milica and Nikolić, Aleksandar S. and Anđelković, Ljubica",
year = "2021",
abstract = "To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.",
publisher = "Elsevier",
journal = "Materials Research Bulletin",
title = "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods",
pages = "111117",
volume = "134",
doi = "10.1016/j.materresbull.2020.111117",
url = "https://hdl.handle.net/21.15107/rcub_dais_9515"
}
Šuljagić, M., Vulić, P., Jeremić, D., Pavlović, V. B., Filipović, S., Kilanski, L., Lewinska, S., Slawska-Waniewska, A., Milenković, M., Nikolić, A. S.,& Anđelković, L.. (2021). The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. in Materials Research Bulletin
Elsevier., 134, 111117.
https://doi.org/10.1016/j.materresbull.2020.111117
https://hdl.handle.net/21.15107/rcub_dais_9515
Šuljagić M, Vulić P, Jeremić D, Pavlović VB, Filipović S, Kilanski L, Lewinska S, Slawska-Waniewska A, Milenković M, Nikolić AS, Anđelković L. The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. in Materials Research Bulletin. 2021;134:111117.
doi:10.1016/j.materresbull.2020.111117
https://hdl.handle.net/21.15107/rcub_dais_9515 .
Šuljagić, Marija, Vulić, Predrag, Jeremić, Dejan, Pavlović, Vladimir B., Filipović, Suzana, Kilanski, Lukasz, Lewinska, Sabina, Slawska-Waniewska, Anna, Milenković, Milica, Nikolić, Aleksandar S., Anđelković, Ljubica, "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods" in Materials Research Bulletin, 134 (2021):111117,
https://doi.org/10.1016/j.materresbull.2020.111117 .,
https://hdl.handle.net/21.15107/rcub_dais_9515 .
3
2
3

The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods

Šuljagić, Marija; Vulić, Predrag; Jeremić, Dejan; Pavlović, Vladimir B.; Filipović, Suzana; Kilanski, Lukasz; Lewinska, Sabina; Slawska-Waniewska, Anna; Milenković, Milica; Nikolić, Aleksandar S.; Anđelković, Ljubica

(Elsevier, 2021)

TY  - JOUR
AU  - Šuljagić, Marija
AU  - Vulić, Predrag
AU  - Jeremić, Dejan
AU  - Pavlović, Vladimir B.
AU  - Filipović, Suzana
AU  - Kilanski, Lukasz
AU  - Lewinska, Sabina
AU  - Slawska-Waniewska, Anna
AU  - Milenković, Milica
AU  - Nikolić, Aleksandar S.
AU  - Anđelković, Ljubica
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/9514
AB  - To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.
PB  - Elsevier
T2  - Materials Research Bulletin
T1  - The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods
SP  - 111117
VL  - 134
DO  - 10.1016/j.materresbull.2020.111117
UR  - https://hdl.handle.net/21.15107/rcub_dais_9514
ER  - 
@article{
author = "Šuljagić, Marija and Vulić, Predrag and Jeremić, Dejan and Pavlović, Vladimir B. and Filipović, Suzana and Kilanski, Lukasz and Lewinska, Sabina and Slawska-Waniewska, Anna and Milenković, Milica and Nikolić, Aleksandar S. and Anđelković, Ljubica",
year = "2021",
abstract = "To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.",
publisher = "Elsevier",
journal = "Materials Research Bulletin",
title = "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods",
pages = "111117",
volume = "134",
doi = "10.1016/j.materresbull.2020.111117",
url = "https://hdl.handle.net/21.15107/rcub_dais_9514"
}
Šuljagić, M., Vulić, P., Jeremić, D., Pavlović, V. B., Filipović, S., Kilanski, L., Lewinska, S., Slawska-Waniewska, A., Milenković, M., Nikolić, A. S.,& Anđelković, L.. (2021). The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. in Materials Research Bulletin
Elsevier., 134, 111117.
https://doi.org/10.1016/j.materresbull.2020.111117
https://hdl.handle.net/21.15107/rcub_dais_9514
Šuljagić M, Vulić P, Jeremić D, Pavlović VB, Filipović S, Kilanski L, Lewinska S, Slawska-Waniewska A, Milenković M, Nikolić AS, Anđelković L. The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. in Materials Research Bulletin. 2021;134:111117.
doi:10.1016/j.materresbull.2020.111117
https://hdl.handle.net/21.15107/rcub_dais_9514 .
Šuljagić, Marija, Vulić, Predrag, Jeremić, Dejan, Pavlović, Vladimir B., Filipović, Suzana, Kilanski, Lukasz, Lewinska, Sabina, Slawska-Waniewska, Anna, Milenković, Milica, Nikolić, Aleksandar S., Anđelković, Ljubica, "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods" in Materials Research Bulletin, 134 (2021):111117,
https://doi.org/10.1016/j.materresbull.2020.111117 .,
https://hdl.handle.net/21.15107/rcub_dais_9514 .
3
2
3

Freeze vs. Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material

Jovanović, Aleksandra A.; Lević, Steva M.; Pavlović, Vladimir B.; Marković, Smilja B.; Pjanović, Rada V.; Đorđević, Verica B.; Nedović, Viktor; Bugarski, Branko M.

(Basel : MDPI AG, 2021)

TY  - JOUR
AU  - Jovanović, Aleksandra A.
AU  - Lević, Steva M.
AU  - Pavlović, Vladimir B.
AU  - Marković, Smilja B.
AU  - Pjanović, Rada V.
AU  - Đorđević, Verica B.
AU  - Nedović, Viktor
AU  - Bugarski, Branko M.
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11798
AB  - Freeze drying was compared with spray drying regarding feasibility to process wild thyme drugs in order to obtain dry formulations at laboratory scale starting from liquid extracts produced by different extraction methods: maceration and heat-, ultrasound-, and microwave-assisted extractions. Higher total powder yield (based on the dry weight prior to extraction) was achieved by freeze than spray drying and lower loss of total polyphenol content (TPC) and total flavonoid content (TFC) due to the drying process. Gelatin as a coating agent (5% w/w) provided better TPC recovery by 70% in case of lyophilization and higher total powder yield in case of spray drying by diminishing material deposition on the wall of the drying chamber. The resulting gelatin-free and gelatin-containing powders carried polyphenols in amount ~190 and 53–75 mg gallic acid equivalents GAE/g of powder, respectively. Microwave-assisted extract formulation was distinguished from the others by a higher content of polyphenols, proteins and sugars, higher bulk density and lower solubility. The type of the drying process mainly affected the position of the gelatin-derived -OH and amide bands in FTIR spectra. Spray-dried formulations compared to freeze-dried expressed higher thermal stability as confirmed by differential scanning calorimetry analysis and a higher diffusion coefficient; the last feature can be associated with the lower specific surface area of irregularly shaped freeze-dried particles (151–223 µm) compared to small microspheres (~8 µm) in spray-dried powder.
PB  - Basel : MDPI AG
T2  - Molecules
T1  - Freeze vs. Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material
SP  - 3933
VL  - 26
IS  - 13
DO  - 10.3390/molecules26133933
UR  - https://hdl.handle.net/21.15107/rcub_dais_11798
ER  - 
@article{
author = "Jovanović, Aleksandra A. and Lević, Steva M. and Pavlović, Vladimir B. and Marković, Smilja B. and Pjanović, Rada V. and Đorđević, Verica B. and Nedović, Viktor and Bugarski, Branko M.",
year = "2021",
abstract = "Freeze drying was compared with spray drying regarding feasibility to process wild thyme drugs in order to obtain dry formulations at laboratory scale starting from liquid extracts produced by different extraction methods: maceration and heat-, ultrasound-, and microwave-assisted extractions. Higher total powder yield (based on the dry weight prior to extraction) was achieved by freeze than spray drying and lower loss of total polyphenol content (TPC) and total flavonoid content (TFC) due to the drying process. Gelatin as a coating agent (5% w/w) provided better TPC recovery by 70% in case of lyophilization and higher total powder yield in case of spray drying by diminishing material deposition on the wall of the drying chamber. The resulting gelatin-free and gelatin-containing powders carried polyphenols in amount ~190 and 53–75 mg gallic acid equivalents GAE/g of powder, respectively. Microwave-assisted extract formulation was distinguished from the others by a higher content of polyphenols, proteins and sugars, higher bulk density and lower solubility. The type of the drying process mainly affected the position of the gelatin-derived -OH and amide bands in FTIR spectra. Spray-dried formulations compared to freeze-dried expressed higher thermal stability as confirmed by differential scanning calorimetry analysis and a higher diffusion coefficient; the last feature can be associated with the lower specific surface area of irregularly shaped freeze-dried particles (151–223 µm) compared to small microspheres (~8 µm) in spray-dried powder.",
publisher = "Basel : MDPI AG",
journal = "Molecules",
title = "Freeze vs. Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material",
pages = "3933",
volume = "26",
number = "13",
doi = "10.3390/molecules26133933",
url = "https://hdl.handle.net/21.15107/rcub_dais_11798"
}
Jovanović, A. A., Lević, S. M., Pavlović, V. B., Marković, S. B., Pjanović, R. V., Đorđević, V. B., Nedović, V.,& Bugarski, B. M.. (2021). Freeze vs. Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material. in Molecules
Basel : MDPI AG., 26(13), 3933.
https://doi.org/10.3390/molecules26133933
https://hdl.handle.net/21.15107/rcub_dais_11798
Jovanović AA, Lević SM, Pavlović VB, Marković SB, Pjanović RV, Đorđević VB, Nedović V, Bugarski BM. Freeze vs. Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material. in Molecules. 2021;26(13):3933.
doi:10.3390/molecules26133933
https://hdl.handle.net/21.15107/rcub_dais_11798 .
Jovanović, Aleksandra A., Lević, Steva M., Pavlović, Vladimir B., Marković, Smilja B., Pjanović, Rada V., Đorđević, Verica B., Nedović, Viktor, Bugarski, Branko M., "Freeze vs. Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material" in Molecules, 26, no. 13 (2021):3933,
https://doi.org/10.3390/molecules26133933 .,
https://hdl.handle.net/21.15107/rcub_dais_11798 .

The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers

Ivanović, Marija; Nenadović, Snežana; Pavlović, Vera P.; Radović, Ivona; Kijevčanin, Mirjana; Pavlović, Vladimir B.; Kljajević, Ljiljana

(Society of Chemists and Technologists of Macedonia, 2021)

TY  - JOUR
AU  - Ivanović, Marija
AU  - Nenadović, Snežana
AU  - Pavlović, Vera P.
AU  - Radović, Ivona
AU  - Kijevčanin, Mirjana
AU  - Pavlović, Vladimir B.
AU  - Kljajević, Ljiljana
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11800
AB  - Thermodynamic parameters (densities, viscosities, speed of sound, and refractive index) of four series of alkaline activators were determined over the temperature range from 15 to 60 °C for the process of geopolymerization. Mixtures of Na2SiO3and NaOH of different molar concentrations (from 2M to 8M with step 2) were used as an alkaline activator. The sample with the highest NaOH concentrationalso shows the highest values of all thermodynamic parameters.Metakaolin, obtained by calcination of kaolin at 750 °C, was used as the starting material.The samples were characterized by X-ray diffraction (XRD),FTIR and Raman spectroscopy, Scanning Electron Microscopy (SEM), and Energy-Dispersive X-Ray (EDX) Spectroscopy. Results of FTIR analysis correlated with results of Raman Spectroscopy. Due to the polymerization process, the changes in the phonon spectrum were confirmed. The different concentra-tions of activators do not notably change the Si/Al ratio.
PB  - Society of Chemists and Technologists of Macedonia
T2  - Macedonian Journal of Chemistry and Chemical Engineering
T1  - The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers
SP  - 99
VL  - 40
IS  - 1
DO  - 10.20450/mjcce.2021.2127
UR  - https://hdl.handle.net/21.15107/rcub_dais_11800
ER  - 
@article{
author = "Ivanović, Marija and Nenadović, Snežana and Pavlović, Vera P. and Radović, Ivona and Kijevčanin, Mirjana and Pavlović, Vladimir B. and Kljajević, Ljiljana",
year = "2021",
abstract = "Thermodynamic parameters (densities, viscosities, speed of sound, and refractive index) of four series of alkaline activators were determined over the temperature range from 15 to 60 °C for the process of geopolymerization. Mixtures of Na2SiO3and NaOH of different molar concentrations (from 2M to 8M with step 2) were used as an alkaline activator. The sample with the highest NaOH concentrationalso shows the highest values of all thermodynamic parameters.Metakaolin, obtained by calcination of kaolin at 750 °C, was used as the starting material.The samples were characterized by X-ray diffraction (XRD),FTIR and Raman spectroscopy, Scanning Electron Microscopy (SEM), and Energy-Dispersive X-Ray (EDX) Spectroscopy. Results of FTIR analysis correlated with results of Raman Spectroscopy. Due to the polymerization process, the changes in the phonon spectrum were confirmed. The different concentra-tions of activators do not notably change the Si/Al ratio.",
publisher = "Society of Chemists and Technologists of Macedonia",
journal = "Macedonian Journal of Chemistry and Chemical Engineering",
title = "The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers",
pages = "99",
volume = "40",
number = "1",
doi = "10.20450/mjcce.2021.2127",
url = "https://hdl.handle.net/21.15107/rcub_dais_11800"
}
Ivanović, M., Nenadović, S., Pavlović, V. P., Radović, I., Kijevčanin, M., Pavlović, V. B.,& Kljajević, L.. (2021). The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers. in Macedonian Journal of Chemistry and Chemical Engineering
Society of Chemists and Technologists of Macedonia., 40(1), 99.
https://doi.org/10.20450/mjcce.2021.2127
https://hdl.handle.net/21.15107/rcub_dais_11800
Ivanović M, Nenadović S, Pavlović VP, Radović I, Kijevčanin M, Pavlović VB, Kljajević L. The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers. in Macedonian Journal of Chemistry and Chemical Engineering. 2021;40(1):99.
doi:10.20450/mjcce.2021.2127
https://hdl.handle.net/21.15107/rcub_dais_11800 .
Ivanović, Marija, Nenadović, Snežana, Pavlović, Vera P., Radović, Ivona, Kijevčanin, Mirjana, Pavlović, Vladimir B., Kljajević, Ljiljana, "The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers" in Macedonian Journal of Chemistry and Chemical Engineering, 40, no. 1 (2021):99,
https://doi.org/10.20450/mjcce.2021.2127 .,
https://hdl.handle.net/21.15107/rcub_dais_11800 .

High Heat Treatment of Goat Cheese Milk. The Effect on Sensory Profile, Consumer Acceptance and Microstructure of Cheese

Miloradović, Zorana; Tomić, Nikola; Kljajević, Nemanja; Lević, Steva; Pavlović, Vladimir B.; Blažić, Marijana; Miočinović, Jelena

(Basel : MDPI AG, 2021)

TY  - JOUR
AU  - Miloradović, Zorana
AU  - Tomić, Nikola
AU  - Kljajević, Nemanja
AU  - Lević, Steva
AU  - Pavlović, Vladimir B.
AU  - Blažić, Marijana
AU  - Miočinović, Jelena
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11644
AB  - Goat cheeses from high heat treated milk (HHTM: 80 °C/5 min (E1) and 90 °C/5 min (E2)), could be regarded as new products, compared to their analogues made from commonly pasteurized milk (65 °C/30 min (C)). Descriptive analysis and consumer tests with a hedonic scale and JAR scale were part of the product development process. The use of scanning electron microscopy enabled deeper insight into the flavor and texture of the cheeses. In all cheese variants, goaty flavor was mildly pronounced. Young HHTM cheeses also had a pronounced whey and cooked/milky flavor. Consumers found such flavor ‘too intensive’. Unlike the control variant, HHTM cheeses were not described as ‘too hard’. Such improvement in texture was found to be a result of fine, highly branched microstructure, sustained over the course of ripening time and highly incorporated milk fat globules inside the cheese mass. Cluster analysis showed that the largest group of consumers (47.5%) preferred E2 cheese. Although consumers found that most of the cheeses were ‘too salty’, this excess did not decrease their overall acceptance. Neither microstructure analysis nor descriptive sensory analysis of goat white brined cheeses produced from high heat treated milk has been done before.
PB  - Basel : MDPI AG
T2  - Foods
T1  - High Heat Treatment of Goat Cheese Milk. The Effect on Sensory Profile, Consumer Acceptance and Microstructure of Cheese
SP  - 1116
VL  - 10
IS  - 5
DO  - 10.3390/foods10051116
UR  - https://hdl.handle.net/21.15107/rcub_dais_11644
ER  - 
@article{
author = "Miloradović, Zorana and Tomić, Nikola and Kljajević, Nemanja and Lević, Steva and Pavlović, Vladimir B. and Blažić, Marijana and Miočinović, Jelena",
year = "2021",
abstract = "Goat cheeses from high heat treated milk (HHTM: 80 °C/5 min (E1) and 90 °C/5 min (E2)), could be regarded as new products, compared to their analogues made from commonly pasteurized milk (65 °C/30 min (C)). Descriptive analysis and consumer tests with a hedonic scale and JAR scale were part of the product development process. The use of scanning electron microscopy enabled deeper insight into the flavor and texture of the cheeses. In all cheese variants, goaty flavor was mildly pronounced. Young HHTM cheeses also had a pronounced whey and cooked/milky flavor. Consumers found such flavor ‘too intensive’. Unlike the control variant, HHTM cheeses were not described as ‘too hard’. Such improvement in texture was found to be a result of fine, highly branched microstructure, sustained over the course of ripening time and highly incorporated milk fat globules inside the cheese mass. Cluster analysis showed that the largest group of consumers (47.5%) preferred E2 cheese. Although consumers found that most of the cheeses were ‘too salty’, this excess did not decrease their overall acceptance. Neither microstructure analysis nor descriptive sensory analysis of goat white brined cheeses produced from high heat treated milk has been done before.",
publisher = "Basel : MDPI AG",
journal = "Foods",
title = "High Heat Treatment of Goat Cheese Milk. The Effect on Sensory Profile, Consumer Acceptance and Microstructure of Cheese",
pages = "1116",
volume = "10",
number = "5",
doi = "10.3390/foods10051116",
url = "https://hdl.handle.net/21.15107/rcub_dais_11644"
}
Miloradović, Z., Tomić, N., Kljajević, N., Lević, S., Pavlović, V. B., Blažić, M.,& Miočinović, J.. (2021). High Heat Treatment of Goat Cheese Milk. The Effect on Sensory Profile, Consumer Acceptance and Microstructure of Cheese. in Foods
Basel : MDPI AG., 10(5), 1116.
https://doi.org/10.3390/foods10051116
https://hdl.handle.net/21.15107/rcub_dais_11644
Miloradović Z, Tomić N, Kljajević N, Lević S, Pavlović VB, Blažić M, Miočinović J. High Heat Treatment of Goat Cheese Milk. The Effect on Sensory Profile, Consumer Acceptance and Microstructure of Cheese. in Foods. 2021;10(5):1116.
doi:10.3390/foods10051116
https://hdl.handle.net/21.15107/rcub_dais_11644 .
Miloradović, Zorana, Tomić, Nikola, Kljajević, Nemanja, Lević, Steva, Pavlović, Vladimir B., Blažić, Marijana, Miočinović, Jelena, "High Heat Treatment of Goat Cheese Milk. The Effect on Sensory Profile, Consumer Acceptance and Microstructure of Cheese" in Foods, 10, no. 5 (2021):1116,
https://doi.org/10.3390/foods10051116 .,
https://hdl.handle.net/21.15107/rcub_dais_11644 .

Freeze versus Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material

Jovanović, Aleksandra A.; Lević, Steva; Pavlović, Vladimir B.; Marković, Smilja; Pjanović, Rada; Đorđević, Verica B.; Nedović, Viktor; Bugarski, Branko

(2021)

TY  - GEN
AU  - Jovanović, Aleksandra A.
AU  - Lević, Steva
AU  - Pavlović, Vladimir B.
AU  - Marković, Smilja
AU  - Pjanović, Rada
AU  - Đorđević, Verica B.
AU  - Nedović, Viktor
AU  - Bugarski, Branko
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11637
AB  - Freeze drying was compared with spray drying regarding feasibility to process wild thyme drug in order to obtain dry formulations at laboratory scale starting from liquid extracts produced by different extraction methods: maceration, heat-, ultrasound-, and microwave-assisted extractions. Higher powder yield (based on the dry weight prior to extraction) was achieved by freeze than spray drying and lower loss of total polyphenol content (TPC) and total flavonoid content (TFC) due to the drying process. Gelatin as a coating agent (5% w/w) provided better TPC recovery by 70% in case of lyophilization and higher powder yield in case of spray drying by diminishing material deposition on the wall of the drying chamber. The resulting gelatin-free and gelatin-containing powders carried polyphenols in amount ~190 and 53-75 mg gallic acid equivalents GAE/g of powder, respectively. Microwave-assisted extract formulation distinguished from others by higher content of polyphenols, proteins and sugars, higher bulk density and lower solubility. The type of the drying process affected mainly position of the gelatin-derived -OH and amide bands in FTIR spectra. Spray dried formulations compared to freeze dried expressed higher thermal stability as confirmed by differential scanning calorimetry analysis and higher diffusion coefficient; the last feature can be associated with the lower specific surface area of irregularly shaped freeze-dried particles (151-223 µm) compared to small microspheres (~8 µm) in spray-dried powder.
T2  - Preprints
T1  - Freeze versus Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material
DO  - 10.20944/preprints202105.0358.v1
UR  - https://hdl.handle.net/21.15107/rcub_dais_11637
ER  - 
@misc{
author = "Jovanović, Aleksandra A. and Lević, Steva and Pavlović, Vladimir B. and Marković, Smilja and Pjanović, Rada and Đorđević, Verica B. and Nedović, Viktor and Bugarski, Branko",
year = "2021",
abstract = "Freeze drying was compared with spray drying regarding feasibility to process wild thyme drug in order to obtain dry formulations at laboratory scale starting from liquid extracts produced by different extraction methods: maceration, heat-, ultrasound-, and microwave-assisted extractions. Higher powder yield (based on the dry weight prior to extraction) was achieved by freeze than spray drying and lower loss of total polyphenol content (TPC) and total flavonoid content (TFC) due to the drying process. Gelatin as a coating agent (5% w/w) provided better TPC recovery by 70% in case of lyophilization and higher powder yield in case of spray drying by diminishing material deposition on the wall of the drying chamber. The resulting gelatin-free and gelatin-containing powders carried polyphenols in amount ~190 and 53-75 mg gallic acid equivalents GAE/g of powder, respectively. Microwave-assisted extract formulation distinguished from others by higher content of polyphenols, proteins and sugars, higher bulk density and lower solubility. The type of the drying process affected mainly position of the gelatin-derived -OH and amide bands in FTIR spectra. Spray dried formulations compared to freeze dried expressed higher thermal stability as confirmed by differential scanning calorimetry analysis and higher diffusion coefficient; the last feature can be associated with the lower specific surface area of irregularly shaped freeze-dried particles (151-223 µm) compared to small microspheres (~8 µm) in spray-dried powder.",
journal = "Preprints",
title = "Freeze versus Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material",
doi = "10.20944/preprints202105.0358.v1",
url = "https://hdl.handle.net/21.15107/rcub_dais_11637"
}
Jovanović, A. A., Lević, S., Pavlović, V. B., Marković, S., Pjanović, R., Đorđević, V. B., Nedović, V.,& Bugarski, B.. (2021). Freeze versus Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material. in Preprints.
https://doi.org/10.20944/preprints202105.0358.v1
https://hdl.handle.net/21.15107/rcub_dais_11637
Jovanović AA, Lević S, Pavlović VB, Marković S, Pjanović R, Đorđević VB, Nedović V, Bugarski B. Freeze versus Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material. in Preprints. 2021;.
doi:10.20944/preprints202105.0358.v1
https://hdl.handle.net/21.15107/rcub_dais_11637 .
Jovanović, Aleksandra A., Lević, Steva, Pavlović, Vladimir B., Marković, Smilja, Pjanović, Rada, Đorđević, Verica B., Nedović, Viktor, Bugarski, Branko, "Freeze versus Spray Drying for Dry Wild Thyme (Thymus serpyllum L.) Extract Formulations: The Impact of Gelatin as a Coating Material" in Preprints (2021),
https://doi.org/10.20944/preprints202105.0358.v1 .,
https://hdl.handle.net/21.15107/rcub_dais_11637 .
1

Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Marković, Smilja; Blagojević, Vladimir A.; Lević, Steva; Savić, Slobodan; Đorđević, Antonije; Pavlović, Vladimir B.

(Springer, 2020)

TY  - JOUR
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Marković, Smilja
AU  - Blagojević, Vladimir A.
AU  - Lević, Steva
AU  - Savić, Slobodan
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10027
AB  - Solid-state mechanical activation of MgO and α-Al2O3 powders was used to produce MgAl2O4. The cation site occupancy in the resulting MgAl2O4 spinel was investigated using different methods. Differential thermal analysis and thermal gravimetry showed that mechanical activation reduced the spinel formation temperature by around 200 °C, and the corresponding activation energy by about 25%. In addition, characteristic temperatures for evaporation of physisorbed water and decomposition of Mg(OH)2 shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of the sintering temperature for all of the sintered specimens, indicating that the breaking point for ordering of the crystal structure was around 1500 °C for non-activated samples, and 1400 °C for activated samples.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics
SP  - 95
EP  - 107
VL  - 140
DO  - 10.1007/s10973-019-08846-w
UR  - https://hdl.handle.net/21.15107/rcub_dais_10027
ER  - 
@article{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Marković, Smilja and Blagojević, Vladimir A. and Lević, Steva and Savić, Slobodan and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2020",
abstract = "Solid-state mechanical activation of MgO and α-Al2O3 powders was used to produce MgAl2O4. The cation site occupancy in the resulting MgAl2O4 spinel was investigated using different methods. Differential thermal analysis and thermal gravimetry showed that mechanical activation reduced the spinel formation temperature by around 200 °C, and the corresponding activation energy by about 25%. In addition, characteristic temperatures for evaporation of physisorbed water and decomposition of Mg(OH)2 shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of the sintering temperature for all of the sintered specimens, indicating that the breaking point for ordering of the crystal structure was around 1500 °C for non-activated samples, and 1400 °C for activated samples.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics",
pages = "95-107",
volume = "140",
doi = "10.1007/s10973-019-08846-w",
url = "https://hdl.handle.net/21.15107/rcub_dais_10027"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Marković, S., Blagojević, V. A., Lević, S., Savić, S., Đorđević, A.,& Pavlović, V. B.. (2020). Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics. in Journal of Thermal Analysis and Calorimetry
Springer., 140, 95-107.
https://doi.org/10.1007/s10973-019-08846-w
https://hdl.handle.net/21.15107/rcub_dais_10027
Obradović N, Fahrenholtz WG, Filipović S, Marković S, Blagojević VA, Lević S, Savić S, Đorđević A, Pavlović VB. Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics. in Journal of Thermal Analysis and Calorimetry. 2020;140:95-107.
doi:10.1007/s10973-019-08846-w
https://hdl.handle.net/21.15107/rcub_dais_10027 .
Obradović, Nina, Fahrenholtz, William G., Filipović, Suzana, Marković, Smilja, Blagojević, Vladimir A., Lević, Steva, Savić, Slobodan, Đorđević, Antonije, Pavlović, Vladimir B., "Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics" in Journal of Thermal Analysis and Calorimetry, 140 (2020):95-107,
https://doi.org/10.1007/s10973-019-08846-w .,
https://hdl.handle.net/21.15107/rcub_dais_10027 .
1
2
2

Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis

Filipović, Suzana; Anđelković, Ljubica; Jeremić, Dejan; Vulić, Predrag; Nikolić, Aleksandar; Marković, Smilja; Paunović, Vesna; Lević, Steva; Pavlović, Vladimir B.

(Belgrade : ETRAN, 2020)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Anđelković, Ljubica
AU  - Jeremić, Dejan
AU  - Vulić, Predrag
AU  - Nikolić, Aleksandar
AU  - Marković, Smilja
AU  - Paunović, Vesna
AU  - Lević, Steva
AU  - Pavlović, Vladimir B.
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/9449
AB  - Barium titanate (BaTiO3) attracts high scientific and technological attention due to good dielectric and electromechanical properties. Although BaTiO3 is one of the most frequently investigated ferroelectric materials, the need for finding new and/or improved synthesis methods of this material still exists. In this paper, a novel, mild synthesis route for producing tetragonal BaTiO3 from barium nitrate and Ti-oxalate precursor is presented. Morphology of the prepared and subsequently sintered BaTiO3 was determined by SEM. Particle size distribution of the as prepared powder was monitored by the laser diffraction. The phase composition, structure and lattice dynamics were investigated by XRD and Raman spectroscopy. Finally, dielectric parameters were determined in the temperature range from 30 to 180 degrees C, and within a variety of frequencies. Curie temperature was detected at 130 degrees C.
PB  - Belgrade : ETRAN
T2  - Science of Sintering
T1  - Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis
SP  - 257
EP  - 268
VL  - 52
DO  - 10.2298/SOS2003257F
UR  - https://hdl.handle.net/21.15107/rcub_dais_9449
ER  - 
@article{
author = "Filipović, Suzana and Anđelković, Ljubica and Jeremić, Dejan and Vulić, Predrag and Nikolić, Aleksandar and Marković, Smilja and Paunović, Vesna and Lević, Steva and Pavlović, Vladimir B.",
year = "2020",
abstract = "Barium titanate (BaTiO3) attracts high scientific and technological attention due to good dielectric and electromechanical properties. Although BaTiO3 is one of the most frequently investigated ferroelectric materials, the need for finding new and/or improved synthesis methods of this material still exists. In this paper, a novel, mild synthesis route for producing tetragonal BaTiO3 from barium nitrate and Ti-oxalate precursor is presented. Morphology of the prepared and subsequently sintered BaTiO3 was determined by SEM. Particle size distribution of the as prepared powder was monitored by the laser diffraction. The phase composition, structure and lattice dynamics were investigated by XRD and Raman spectroscopy. Finally, dielectric parameters were determined in the temperature range from 30 to 180 degrees C, and within a variety of frequencies. Curie temperature was detected at 130 degrees C.",
publisher = "Belgrade : ETRAN",
journal = "Science of Sintering",
title = "Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis",
pages = "257-268",
volume = "52",
doi = "10.2298/SOS2003257F",
url = "https://hdl.handle.net/21.15107/rcub_dais_9449"
}
Filipović, S., Anđelković, L., Jeremić, D., Vulić, P., Nikolić, A., Marković, S., Paunović, V., Lević, S.,& Pavlović, V. B.. (2020). Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis. in Science of Sintering
Belgrade : ETRAN., 52, 257-268.
https://doi.org/10.2298/SOS2003257F
https://hdl.handle.net/21.15107/rcub_dais_9449
Filipović S, Anđelković L, Jeremić D, Vulić P, Nikolić A, Marković S, Paunović V, Lević S, Pavlović VB. Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis. in Science of Sintering. 2020;52:257-268.
doi:10.2298/SOS2003257F
https://hdl.handle.net/21.15107/rcub_dais_9449 .
Filipović, Suzana, Anđelković, Ljubica, Jeremić, Dejan, Vulić, Predrag, Nikolić, Aleksandar, Marković, Smilja, Paunović, Vesna, Lević, Steva, Pavlović, Vladimir B., "Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis" in Science of Sintering, 52 (2020):257-268,
https://doi.org/10.2298/SOS2003257F .,
https://hdl.handle.net/21.15107/rcub_dais_9449 .

Rheology and Microstructures of Rennet Gels from Differently Heated Goat Milk

Miloradović, Zorana; Kljajević, Nemanja; Miočinović, Jelena; Lević, Steva; Pavlović, Vladimir B.; Blažić, Marijana; Puđa, Predrag

(Basel : MDPI, 2020)

TY  - JOUR
AU  - Miloradović, Zorana
AU  - Kljajević, Nemanja
AU  - Miočinović, Jelena
AU  - Lević, Steva
AU  - Pavlović, Vladimir B.
AU  - Blažić, Marijana
AU  - Puđa, Predrag
PY  - 2020
UR  - https://www.mdpi.com/2304-8158/9/3/283
UR  - http://dais.sanu.ac.rs/123456789/8955
AB  - Rennet coagulation of goat milk heated to 65 °C/30 min (Gc), 80 °C/5 min (G8) and 90 °C/5 min (G9) was studied. A rheometer equipped with a vane geometry tool was used to measure milk coagulation parameters and viscoelastic properties of rennet gels. Yield parameters: curd yield, laboratory curd yield and curd yield efficiency were measured and calculated. Scanning electron microscopy of rennet gels was conducted. Storage moduli (G’) of gels at the moment of cutting were 19.9 ± 1.71 Pa (Gc), 11.9 ± 1.96 Pa (G8) and 7.3 ± 1.46 Pa (G9). Aggregation rate and curd firmness decreased with the increase of milk heating temperature, while coagulation time did not change significantly. High heat treatment of goat milk had a significant effect on both laboratory curd yield and curd yield. However, laboratory curd yield (27.7 ± 1.84%) of the G9 treatment was unreasonably high compared to curd yield (15.4 ± 0.60%). The microstructure of G9 was notably different compared to Gc and G8, with a denser and more compact microstructure, smaller paracasein micelles and void spaces in a form of cracks indicating weaker cross links. The findings of this study might serve as the bases for the development of different cheese types produced from high-heat-treated goat milk.
PB  - Basel : MDPI
T2  - Foods
T1  - Rheology and Microstructures of Rennet Gels from Differently Heated Goat Milk
SP  - 283
VL  - 9
IS  - 3
DO  - 10.3390/foods9030283
UR  - https://hdl.handle.net/21.15107/rcub_dais_8955
ER  - 
@article{
author = "Miloradović, Zorana and Kljajević, Nemanja and Miočinović, Jelena and Lević, Steva and Pavlović, Vladimir B. and Blažić, Marijana and Puđa, Predrag",
year = "2020",
abstract = "Rennet coagulation of goat milk heated to 65 °C/30 min (Gc), 80 °C/5 min (G8) and 90 °C/5 min (G9) was studied. A rheometer equipped with a vane geometry tool was used to measure milk coagulation parameters and viscoelastic properties of rennet gels. Yield parameters: curd yield, laboratory curd yield and curd yield efficiency were measured and calculated. Scanning electron microscopy of rennet gels was conducted. Storage moduli (G’) of gels at the moment of cutting were 19.9 ± 1.71 Pa (Gc), 11.9 ± 1.96 Pa (G8) and 7.3 ± 1.46 Pa (G9). Aggregation rate and curd firmness decreased with the increase of milk heating temperature, while coagulation time did not change significantly. High heat treatment of goat milk had a significant effect on both laboratory curd yield and curd yield. However, laboratory curd yield (27.7 ± 1.84%) of the G9 treatment was unreasonably high compared to curd yield (15.4 ± 0.60%). The microstructure of G9 was notably different compared to Gc and G8, with a denser and more compact microstructure, smaller paracasein micelles and void spaces in a form of cracks indicating weaker cross links. The findings of this study might serve as the bases for the development of different cheese types produced from high-heat-treated goat milk.",
publisher = "Basel : MDPI",
journal = "Foods",
title = "Rheology and Microstructures of Rennet Gels from Differently Heated Goat Milk",
pages = "283",
volume = "9",
number = "3",
doi = "10.3390/foods9030283",
url = "https://hdl.handle.net/21.15107/rcub_dais_8955"
}
Miloradović, Z., Kljajević, N., Miočinović, J., Lević, S., Pavlović, V. B., Blažić, M.,& Puđa, P.. (2020). Rheology and Microstructures of Rennet Gels from Differently Heated Goat Milk. in Foods
Basel : MDPI., 9(3), 283.
https://doi.org/10.3390/foods9030283
https://hdl.handle.net/21.15107/rcub_dais_8955
Miloradović Z, Kljajević N, Miočinović J, Lević S, Pavlović VB, Blažić M, Puđa P. Rheology and Microstructures of Rennet Gels from Differently Heated Goat Milk. in Foods. 2020;9(3):283.
doi:10.3390/foods9030283
https://hdl.handle.net/21.15107/rcub_dais_8955 .
Miloradović, Zorana, Kljajević, Nemanja, Miočinović, Jelena, Lević, Steva, Pavlović, Vladimir B., Blažić, Marijana, Puđa, Predrag, "Rheology and Microstructures of Rennet Gels from Differently Heated Goat Milk" in Foods, 9, no. 3 (2020):283,
https://doi.org/10.3390/foods9030283 .,
https://hdl.handle.net/21.15107/rcub_dais_8955 .
4
1
2

Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Marković, Smilja; Blagojević, Vladimir A.; Lević, Steva; Savić, Slobodan; Đorđević, Antonije; Pavlović, Vladimir B.

(Springer, 2020)

TY  - JOUR
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Marković, Smilja
AU  - Blagojević, Vladimir A.
AU  - Lević, Steva
AU  - Savić, Slobodan
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2020
UR  - http://dais.sanu.ac.rs/123456789/6910
AB  - Solid-state mechanical activation of MgO and α-Al2O3 powders was used to produce MgAl2O4. The cation site occupancy in the resulting MgAl2O4 spinel was investigated using different methods. Differential thermal analysis and thermal gravimetry showed that mechanical activation reduced the spinel formation temperature by around 200 °C, and the corresponding activation energy by about 25%. In addition, characteristic temperatures for evaporation of physisorbed water and decomposition of Mg(OH)2 shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of the sintering temperature for all of the sintered specimens, indicating that the breaking point for ordering of the crystal structure was around 1500 °C for non-activated samples, and 1400 °C for activated samples.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics
SP  - 95
EP  - 107
VL  - 140
DO  - 10.1007/s10973-019-08846-w
UR  - https://hdl.handle.net/21.15107/rcub_dais_6910
ER  - 
@article{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Marković, Smilja and Blagojević, Vladimir A. and Lević, Steva and Savić, Slobodan and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2020",
abstract = "Solid-state mechanical activation of MgO and α-Al2O3 powders was used to produce MgAl2O4. The cation site occupancy in the resulting MgAl2O4 spinel was investigated using different methods. Differential thermal analysis and thermal gravimetry showed that mechanical activation reduced the spinel formation temperature by around 200 °C, and the corresponding activation energy by about 25%. In addition, characteristic temperatures for evaporation of physisorbed water and decomposition of Mg(OH)2 shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of the sintering temperature for all of the sintered specimens, indicating that the breaking point for ordering of the crystal structure was around 1500 °C for non-activated samples, and 1400 °C for activated samples.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics",
pages = "95-107",
volume = "140",
doi = "10.1007/s10973-019-08846-w",
url = "https://hdl.handle.net/21.15107/rcub_dais_6910"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Marković, S., Blagojević, V. A., Lević, S., Savić, S., Đorđević, A.,& Pavlović, V. B.. (2020). Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics. in Journal of Thermal Analysis and Calorimetry
Springer., 140, 95-107.
https://doi.org/10.1007/s10973-019-08846-w
https://hdl.handle.net/21.15107/rcub_dais_6910
Obradović N, Fahrenholtz WG, Filipović S, Marković S, Blagojević VA, Lević S, Savić S, Đorđević A, Pavlović VB. Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics. in Journal of Thermal Analysis and Calorimetry. 2020;140:95-107.
doi:10.1007/s10973-019-08846-w
https://hdl.handle.net/21.15107/rcub_dais_6910 .
Obradović, Nina, Fahrenholtz, William G., Filipović, Suzana, Marković, Smilja, Blagojević, Vladimir A., Lević, Steva, Savić, Slobodan, Đorđević, Antonije, Pavlović, Vladimir B., "Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics" in Journal of Thermal Analysis and Calorimetry, 140 (2020):95-107,
https://doi.org/10.1007/s10973-019-08846-w .,
https://hdl.handle.net/21.15107/rcub_dais_6910 .
1
2
2

Synthesis, characterization and in vitro evaluation of divalent ion release from stable NiFe2O4, ZnFe2O4 and core-shell ZnFe2O4@NiFe2O4 nanoparticles

Anđelković, Ljubica; Jeremić, Dejan; Milenković, Milica R.; Radosavljević, Jelena; Vulić, Predrag; Pavlović, Vladimir B.; Manojlović, Dragan D.; Nikolić, Aleksandar S.

(Elsevier, 2020)

TY  - JOUR
AU  - Anđelković, Ljubica
AU  - Jeremić, Dejan
AU  - Milenković, Milica R.
AU  - Radosavljević, Jelena
AU  - Vulić, Predrag
AU  - Pavlović, Vladimir B.
AU  - Manojlović, Dragan D.
AU  - Nikolić, Aleksandar S.
PY  - 2020
UR  - http://dais.sanu.ac.rs/123456789/6901
AB  - A simple organic-phase synthesis process was used to produce bare NiFe2O4 and ZnFe2O4 and core-shell ZnFe2O4@NiFe2O4 ferrite nanoparticles. X-ray powder diffractograms for all investigated powders show characteristic peaks of a spinel cubic structure without a secondary phase. Transmission electron microscopy (TEM) indicated the presence of nanoparticles that are smaller than 20 nm. The release of divalent ions (Ni2+ and Zn2+) from synthesized nanoparticles that were dispersed in saline solution, phosphate-buffered saline (PBS) and human serum, as determined by the inductively coupled plasma mass spectrometry (ICP-MS) method, was lower than 2 wt %. These results demonstrate the stability of the investigated nanoparticles in biologically relevant media and exclude the toxicity of Ni2+ and Zn2+ due to metal ion release, thereby opening a broad range of (bio)medical applications.
PB  - Elsevier
T2  - Ceramics International
T1  - Synthesis, characterization and in vitro evaluation of divalent ion release from stable NiFe2O4, ZnFe2O4 and core-shell ZnFe2O4@NiFe2O4 nanoparticles
SP  - 3528
EP  - 3533
VL  - 46
IS  - 3
DO  - 10.1016/j.ceramint.2019.10.068
UR  - https://hdl.handle.net/21.15107/rcub_dais_6901
ER  - 
@article{
author = "Anđelković, Ljubica and Jeremić, Dejan and Milenković, Milica R. and Radosavljević, Jelena and Vulić, Predrag and Pavlović, Vladimir B. and Manojlović, Dragan D. and Nikolić, Aleksandar S.",
year = "2020",
abstract = "A simple organic-phase synthesis process was used to produce bare NiFe2O4 and ZnFe2O4 and core-shell ZnFe2O4@NiFe2O4 ferrite nanoparticles. X-ray powder diffractograms for all investigated powders show characteristic peaks of a spinel cubic structure without a secondary phase. Transmission electron microscopy (TEM) indicated the presence of nanoparticles that are smaller than 20 nm. The release of divalent ions (Ni2+ and Zn2+) from synthesized nanoparticles that were dispersed in saline solution, phosphate-buffered saline (PBS) and human serum, as determined by the inductively coupled plasma mass spectrometry (ICP-MS) method, was lower than 2 wt %. These results demonstrate the stability of the investigated nanoparticles in biologically relevant media and exclude the toxicity of Ni2+ and Zn2+ due to metal ion release, thereby opening a broad range of (bio)medical applications.",
publisher = "Elsevier",
journal = "Ceramics International",
title = "Synthesis, characterization and in vitro evaluation of divalent ion release from stable NiFe2O4, ZnFe2O4 and core-shell ZnFe2O4@NiFe2O4 nanoparticles",
pages = "3528-3533",
volume = "46",
number = "3",
doi = "10.1016/j.ceramint.2019.10.068",
url = "https://hdl.handle.net/21.15107/rcub_dais_6901"
}
Anđelković, L., Jeremić, D., Milenković, M. R., Radosavljević, J., Vulić, P., Pavlović, V. B., Manojlović, D. D.,& Nikolić, A. S.. (2020). Synthesis, characterization and in vitro evaluation of divalent ion release from stable NiFe2O4, ZnFe2O4 and core-shell ZnFe2O4@NiFe2O4 nanoparticles. in Ceramics International
Elsevier., 46(3), 3528-3533.
https://doi.org/10.1016/j.ceramint.2019.10.068
https://hdl.handle.net/21.15107/rcub_dais_6901
Anđelković L, Jeremić D, Milenković MR, Radosavljević J, Vulić P, Pavlović VB, Manojlović DD, Nikolić AS. Synthesis, characterization and in vitro evaluation of divalent ion release from stable NiFe2O4, ZnFe2O4 and core-shell ZnFe2O4@NiFe2O4 nanoparticles. in Ceramics International. 2020;46(3):3528-3533.
doi:10.1016/j.ceramint.2019.10.068
https://hdl.handle.net/21.15107/rcub_dais_6901 .
Anđelković, Ljubica, Jeremić, Dejan, Milenković, Milica R., Radosavljević, Jelena, Vulić, Predrag, Pavlović, Vladimir B., Manojlović, Dragan D., Nikolić, Aleksandar S., "Synthesis, characterization and in vitro evaluation of divalent ion release from stable NiFe2O4, ZnFe2O4 and core-shell ZnFe2O4@NiFe2O4 nanoparticles" in Ceramics International, 46, no. 3 (2020):3528-3533,
https://doi.org/10.1016/j.ceramint.2019.10.068 .,
https://hdl.handle.net/21.15107/rcub_dais_6901 .
6
4
6

Effects of Mechanical Activation on the Formation and Sintering Kinetics of Barium Strontium Titanate Ceramics

Kosanović, Darko; Labus, Nebojša; Živojinović, Jelena; Peleš Tadić, Adriana; Blagojević, Vladimir A.; Pavlović, Vladimir B.

(Belgrade : ETRAN, 2020)

TY  - JOUR
AU  - Kosanović, Darko
AU  - Labus, Nebojša
AU  - Živojinović, Jelena
AU  - Peleš Tadić, Adriana
AU  - Blagojević, Vladimir A.
AU  - Pavlović, Vladimir B.
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10039
AB  - The influence of mechanical activation on the formation, sintering kinetics and morphology was investigated in sintered barium strontium titanate (BST) ceramics with different Ba-to-Sr ratios. Initial powders were mechanically activated for 20 and 120 min, leading to mechano-chemical reaction and formation of BaxSr1-xTiO3 phases. Agglomeration was found to represent an important factor in the process of formation of BaxSr1-xTiO3 phases around 800 oC and during sintering. It reduces the effectiveness of mechanical activation on formation of BaxSr1-xTiO3 phases beyond the short period (20 min), while in the process of sintering, prolonged mechanical activation (120 min) leads to a significant reduction in sintering temperature and the corresponding value of activation energy. In addition, all three systems show a phase transformation around 1100 oC, attributed to the hexagonal-to-cubic phase transition. Morphology of the final sintered ceramics can be correlated primarily with the state of the pre-sintered powder, where mechanically activated powders with smaller particle size produced more compact and less porous final product.
PB  - Belgrade : ETRAN
T2  - Science of Sintering
T1  - Effects of Mechanical Activation on the Formation and Sintering Kinetics of Barium Strontium Titanate Ceramics
SP  - 371
EP  - 385
VL  - 52
IS  - 4
DO  - 10.2298/SOS2004371K
UR  - https://hdl.handle.net/21.15107/rcub_dais_10039
ER  - 
@article{
author = "Kosanović, Darko and Labus, Nebojša and Živojinović, Jelena and Peleš Tadić, Adriana and Blagojević, Vladimir A. and Pavlović, Vladimir B.",
year = "2020",
abstract = "The influence of mechanical activation on the formation, sintering kinetics and morphology was investigated in sintered barium strontium titanate (BST) ceramics with different Ba-to-Sr ratios. Initial powders were mechanically activated for 20 and 120 min, leading to mechano-chemical reaction and formation of BaxSr1-xTiO3 phases. Agglomeration was found to represent an important factor in the process of formation of BaxSr1-xTiO3 phases around 800 oC and during sintering. It reduces the effectiveness of mechanical activation on formation of BaxSr1-xTiO3 phases beyond the short period (20 min), while in the process of sintering, prolonged mechanical activation (120 min) leads to a significant reduction in sintering temperature and the corresponding value of activation energy. In addition, all three systems show a phase transformation around 1100 oC, attributed to the hexagonal-to-cubic phase transition. Morphology of the final sintered ceramics can be correlated primarily with the state of the pre-sintered powder, where mechanically activated powders with smaller particle size produced more compact and less porous final product.",
publisher = "Belgrade : ETRAN",
journal = "Science of Sintering",
title = "Effects of Mechanical Activation on the Formation and Sintering Kinetics of Barium Strontium Titanate Ceramics",
pages = "371-385",
volume = "52",
number = "4",
doi = "10.2298/SOS2004371K",
url = "https://hdl.handle.net/21.15107/rcub_dais_10039"
}
Kosanović, D., Labus, N., Živojinović, J., Peleš Tadić, A., Blagojević, V. A.,& Pavlović, V. B.. (2020). Effects of Mechanical Activation on the Formation and Sintering Kinetics of Barium Strontium Titanate Ceramics. in Science of Sintering
Belgrade : ETRAN., 52(4), 371-385.
https://doi.org/10.2298/SOS2004371K
https://hdl.handle.net/21.15107/rcub_dais_10039
Kosanović D, Labus N, Živojinović J, Peleš Tadić A, Blagojević VA, Pavlović VB. Effects of Mechanical Activation on the Formation and Sintering Kinetics of Barium Strontium Titanate Ceramics. in Science of Sintering. 2020;52(4):371-385.
doi:10.2298/SOS2004371K
https://hdl.handle.net/21.15107/rcub_dais_10039 .
Kosanović, Darko, Labus, Nebojša, Živojinović, Jelena, Peleš Tadić, Adriana, Blagojević, Vladimir A., Pavlović, Vladimir B., "Effects of Mechanical Activation on the Formation and Sintering Kinetics of Barium Strontium Titanate Ceramics" in Science of Sintering, 52, no. 4 (2020):371-385,
https://doi.org/10.2298/SOS2004371K .,
https://hdl.handle.net/21.15107/rcub_dais_10039 .

Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal

Obradović, Nina; Rusmirović, Jelena; Filipović, Suzana; Kosanović, Darko; Marinković, Aleksandar; Radić, Danka; Pavlović, Vladimir B.

(Desalination Publications, 2020)

TY  - JOUR
AU  - Obradović, Nina
AU  - Rusmirović, Jelena
AU  - Filipović, Suzana
AU  - Kosanović, Darko
AU  - Marinković, Aleksandar
AU  - Radić, Danka
AU  - Pavlović, Vladimir B.
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10040
AB  - Industrial/technological growth is directly connected with environmental pollution, but its influence can be minimized through pollution abatement approaches such as the treatment of industrial wastewater. In this study, novel porous amine-functionalized silicate minerals, specifically, cordierite was investigated for the removal of toxic heavy metals from industrial wastewaters. Cordierite supports were synthesized by mixing MgO, Al2O3 , and SiO2 powders in 2:2:5 molar ratios, and mechanically activated via ball milling in ethanol for 10, 40, or 80 min. Pellets were sintered by heating in air at 20°C min-1 to 1,350°C, for 2 h. Porous supports were produced by coarsely crushing the sintered pellets and mixing the crushed and sieved cordierite powder with 20 wt.% of a pore-forming agent, either nanocellulose or yeast. The resulting pellets were sintered by heating at 5°C min-1 to 700°C in air. The synthetic cordierite support was modified by treatment in poly-ethylenimine. Activated supports were then tested for the removal of Ni2+ and Cd2+ ions. The phase composition of the cordierite supports was analyzed by the X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Analysis of adsorption isotherms, kinetics, and thermodynamic parameters indicated that adsorption was a spontaneous, endothermic process with a maximum adsorption capacity of 36 mg g-1 for Cd2+ and 43 mg g-1 for Ni2+. This work has shed light on the mechanism of heavy metal removal from the aquatic medium using the novel hybrid functionalized cordierite-based ceramic.
PB  - Desalination Publications
T2  - Desalination and Water Treatment
T1  - Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal
SP  - 283
EP  - 296
VL  - 192
DO  - 10.5004/dwt.2020.25736
UR  - https://hdl.handle.net/21.15107/rcub_dais_10040
ER  - 
@article{
author = "Obradović, Nina and Rusmirović, Jelena and Filipović, Suzana and Kosanović, Darko and Marinković, Aleksandar and Radić, Danka and Pavlović, Vladimir B.",
year = "2020",
abstract = "Industrial/technological growth is directly connected with environmental pollution, but its influence can be minimized through pollution abatement approaches such as the treatment of industrial wastewater. In this study, novel porous amine-functionalized silicate minerals, specifically, cordierite was investigated for the removal of toxic heavy metals from industrial wastewaters. Cordierite supports were synthesized by mixing MgO, Al2O3 , and SiO2 powders in 2:2:5 molar ratios, and mechanically activated via ball milling in ethanol for 10, 40, or 80 min. Pellets were sintered by heating in air at 20°C min-1 to 1,350°C, for 2 h. Porous supports were produced by coarsely crushing the sintered pellets and mixing the crushed and sieved cordierite powder with 20 wt.% of a pore-forming agent, either nanocellulose or yeast. The resulting pellets were sintered by heating at 5°C min-1 to 700°C in air. The synthetic cordierite support was modified by treatment in poly-ethylenimine. Activated supports were then tested for the removal of Ni2+ and Cd2+ ions. The phase composition of the cordierite supports was analyzed by the X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Analysis of adsorption isotherms, kinetics, and thermodynamic parameters indicated that adsorption was a spontaneous, endothermic process with a maximum adsorption capacity of 36 mg g-1 for Cd2+ and 43 mg g-1 for Ni2+. This work has shed light on the mechanism of heavy metal removal from the aquatic medium using the novel hybrid functionalized cordierite-based ceramic.",
publisher = "Desalination Publications",
journal = "Desalination and Water Treatment",
title = "Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal",
pages = "283-296",
volume = "192",
doi = "10.5004/dwt.2020.25736",
url = "https://hdl.handle.net/21.15107/rcub_dais_10040"
}
Obradović, N., Rusmirović, J., Filipović, S., Kosanović, D., Marinković, A., Radić, D.,& Pavlović, V. B.. (2020). Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal. in Desalination and Water Treatment
Desalination Publications., 192, 283-296.
https://doi.org/10.5004/dwt.2020.25736
https://hdl.handle.net/21.15107/rcub_dais_10040
Obradović N, Rusmirović J, Filipović S, Kosanović D, Marinković A, Radić D, Pavlović VB. Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal. in Desalination and Water Treatment. 2020;192:283-296.
doi:10.5004/dwt.2020.25736
https://hdl.handle.net/21.15107/rcub_dais_10040 .
Obradović, Nina, Rusmirović, Jelena, Filipović, Suzana, Kosanović, Darko, Marinković, Aleksandar, Radić, Danka, Pavlović, Vladimir B., "Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal" in Desalination and Water Treatment, 192 (2020):283-296,
https://doi.org/10.5004/dwt.2020.25736 .,
https://hdl.handle.net/21.15107/rcub_dais_10040 .

Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times

Miljković, Miljana; Kljajević, Ljiljana; Filipović, Suzana; Pavlović, Vladimir B.; Nenadović, Snežana S.

(Belgrade : ETRAN, 2020)

TY  - JOUR
AU  - Miljković, Miljana
AU  - Kljajević, Ljiljana
AU  - Filipović, Suzana
AU  - Pavlović, Vladimir B.
AU  - Nenadović, Snežana S.
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10041
AB  - The aim of the study was to investigate the influence of low heating temperatures with two different retention times to optimize the process for obtaining nanosized hydroxyapatite material that can possibly be used in the fields of biology and pharmacy. Nanosized hydroxyapatite was successfully obtained by wet chemical precipitation. The annealing of the material performed at 300 oC with two different retention times i.e. 3 and 6 hours in air atmosphere. Low annealing temperature with extended retention time was selected in terms to reduce energy consumption. FTIR spectroscopy was used to confirm characteristic vibrational bands of hydroxyapatite samples, and presence of carbonate bands of hydroxyapatite annealed for 3h and 6h. X-Ray powder diffraction analysis were used to examine phase composition, determine the size of unit cells and crystallite sizes, and SEMEDS methods were used to obtain particle size and arrangement also grain growth morphology and confirmed the presence of calcium, phosphorous oxygen and carbonate peaks. The results show that different retention time has influence on particle growth as well as unit cell parameters and crystallite sizes changes of hydroxyapatite material.
PB  - Belgrade : ETRAN
T2  - Science of Sintering
T1  - Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times
SP  - 405
EP  - 413
VL  - 52
IS  - 4
DO  - 10.2298/SOS2004405M
UR  - https://hdl.handle.net/21.15107/rcub_dais_10041
ER  - 
@article{
author = "Miljković, Miljana and Kljajević, Ljiljana and Filipović, Suzana and Pavlović, Vladimir B. and Nenadović, Snežana S.",
year = "2020",
abstract = "The aim of the study was to investigate the influence of low heating temperatures with two different retention times to optimize the process for obtaining nanosized hydroxyapatite material that can possibly be used in the fields of biology and pharmacy. Nanosized hydroxyapatite was successfully obtained by wet chemical precipitation. The annealing of the material performed at 300 oC with two different retention times i.e. 3 and 6 hours in air atmosphere. Low annealing temperature with extended retention time was selected in terms to reduce energy consumption. FTIR spectroscopy was used to confirm characteristic vibrational bands of hydroxyapatite samples, and presence of carbonate bands of hydroxyapatite annealed for 3h and 6h. X-Ray powder diffraction analysis were used to examine phase composition, determine the size of unit cells and crystallite sizes, and SEMEDS methods were used to obtain particle size and arrangement also grain growth morphology and confirmed the presence of calcium, phosphorous oxygen and carbonate peaks. The results show that different retention time has influence on particle growth as well as unit cell parameters and crystallite sizes changes of hydroxyapatite material.",
publisher = "Belgrade : ETRAN",
journal = "Science of Sintering",
title = "Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times",
pages = "405-413",
volume = "52",
number = "4",
doi = "10.2298/SOS2004405M",
url = "https://hdl.handle.net/21.15107/rcub_dais_10041"
}
Miljković, M., Kljajević, L., Filipović, S., Pavlović, V. B.,& Nenadović, S. S.. (2020). Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times. in Science of Sintering
Belgrade : ETRAN., 52(4), 405-413.
https://doi.org/10.2298/SOS2004405M
https://hdl.handle.net/21.15107/rcub_dais_10041
Miljković M, Kljajević L, Filipović S, Pavlović VB, Nenadović SS. Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times. in Science of Sintering. 2020;52(4):405-413.
doi:10.2298/SOS2004405M
https://hdl.handle.net/21.15107/rcub_dais_10041 .
Miljković, Miljana, Kljajević, Ljiljana, Filipović, Suzana, Pavlović, Vladimir B., Nenadović, Snežana S., "Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times" in Science of Sintering, 52, no. 4 (2020):405-413,
https://doi.org/10.2298/SOS2004405M .,
https://hdl.handle.net/21.15107/rcub_dais_10041 .
1
1

Kinetics of thermally activated processes in cordierite-based ceramics

Obradović, Nina; Blagojević, Vladimir A.; Filipović, Suzana; Đorđević, Antonije; Kosanović, Darko; Marković, Smilja; Kachlik, Martin; Maca, Karel; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Blagojević, Vladimir A.
AU  - Filipović, Suzana
AU  - Đorđević, Antonije
AU  - Kosanović, Darko
AU  - Marković, Smilja
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/7048
AB  - Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Kinetics of thermally activated processes in cordierite-based ceramics
SP  - 2989
EP  - 2998
VL  - 138
DO  - 10.1007/s10973-018-7924-1
UR  - https://hdl.handle.net/21.15107/rcub_dais_7048
ER  - 
@article{
author = "Obradović, Nina and Blagojević, Vladimir A. and Filipović, Suzana and Đorđević, Antonije and Kosanović, Darko and Marković, Smilja and Kachlik, Martin and Maca, Karel and Pavlović, Vladimir B.",
year = "2019",
abstract = "Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Kinetics of thermally activated processes in cordierite-based ceramics",
pages = "2989-2998",
volume = "138",
doi = "10.1007/s10973-018-7924-1",
url = "https://hdl.handle.net/21.15107/rcub_dais_7048"
}
Obradović, N., Blagojević, V. A., Filipović, S., Đorđević, A., Kosanović, D., Marković, S., Kachlik, M., Maca, K.,& Pavlović, V. B.. (2019). Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry
Springer., 138, 2989-2998.
https://doi.org/10.1007/s10973-018-7924-1
https://hdl.handle.net/21.15107/rcub_dais_7048
Obradović N, Blagojević VA, Filipović S, Đorđević A, Kosanović D, Marković S, Kachlik M, Maca K, Pavlović VB. Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry. 2019;138:2989-2998.
doi:10.1007/s10973-018-7924-1
https://hdl.handle.net/21.15107/rcub_dais_7048 .
Obradović, Nina, Blagojević, Vladimir A., Filipović, Suzana, Đorđević, Antonije, Kosanović, Darko, Marković, Smilja, Kachlik, Martin, Maca, Karel, Pavlović, Vladimir B., "Kinetics of thermally activated processes in cordierite-based ceramics" in Journal of Thermal Analysis and Calorimetry, 138 (2019):2989-2998,
https://doi.org/10.1007/s10973-018-7924-1 .,
https://hdl.handle.net/21.15107/rcub_dais_7048 .
2
1
1

Kinetics of thermally activated processes in cordierite-based ceramics

Obradović, Nina; Blagojević, Vladimir A.; Filipović, Suzana; Đorđević, Antonije; Kosanović, Darko; Marković, Smilja; Kachlik, Martin; Maca, Karel; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Blagojević, Vladimir A.
AU  - Filipović, Suzana
AU  - Đorđević, Antonije
AU  - Kosanović, Darko
AU  - Marković, Smilja
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/4558
AB  - Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Kinetics of thermally activated processes in cordierite-based ceramics
SP  - 2989
EP  - 2998
VL  - 138
DO  - 10.1007/s10973-018-7924-1
UR  - https://hdl.handle.net/21.15107/rcub_dais_4558
ER  - 
@article{
author = "Obradović, Nina and Blagojević, Vladimir A. and Filipović, Suzana and Đorđević, Antonije and Kosanović, Darko and Marković, Smilja and Kachlik, Martin and Maca, Karel and Pavlović, Vladimir B.",
year = "2019",
abstract = "Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Kinetics of thermally activated processes in cordierite-based ceramics",
pages = "2989-2998",
volume = "138",
doi = "10.1007/s10973-018-7924-1",
url = "https://hdl.handle.net/21.15107/rcub_dais_4558"
}
Obradović, N., Blagojević, V. A., Filipović, S., Đorđević, A., Kosanović, D., Marković, S., Kachlik, M., Maca, K.,& Pavlović, V. B.. (2019). Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry
Springer., 138, 2989-2998.
https://doi.org/10.1007/s10973-018-7924-1
https://hdl.handle.net/21.15107/rcub_dais_4558
Obradović N, Blagojević VA, Filipović S, Đorđević A, Kosanović D, Marković S, Kachlik M, Maca K, Pavlović VB. Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry. 2019;138:2989-2998.
doi:10.1007/s10973-018-7924-1
https://hdl.handle.net/21.15107/rcub_dais_4558 .
Obradović, Nina, Blagojević, Vladimir A., Filipović, Suzana, Đorđević, Antonije, Kosanović, Darko, Marković, Smilja, Kachlik, Martin, Maca, Karel, Pavlović, Vladimir B., "Kinetics of thermally activated processes in cordierite-based ceramics" in Journal of Thermal Analysis and Calorimetry, 138 (2019):2989-2998,
https://doi.org/10.1007/s10973-018-7924-1 .,
https://hdl.handle.net/21.15107/rcub_dais_4558 .
2
1
1

Morphological and structural characterization of spinel MgAl2O4

Filipović, Suzana; Obradović, Nina; Fahrenholtz, William G.; Marinković, Bojan A.; Rogan, Jelena; Lević, Steva; Pavlović, Vladimir B.

(Belgrade : Serbian Ceramic Society, 2019)

TY  - CONF
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Marinković, Bojan A.
AU  - Rogan, Jelena
AU  - Lević, Steva
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6779
AB  - Magnesium aluminate has spinel structure and very good mechanical, chemical, and thermal properties. Owing to these properties, it has a wide range of applications including refractory ceramics, optically transparent ceramic windows and armors. Its low dielectric permeability and low loss tangent enable its using for integrated electronic devices, as well. Furthermore, as a porous ceramic, magnesium aluminate has important application as humidity sensor, catalyst and filter for waste water purification. In this paper, synthesis and characterization of MgAl2O4 was performed. Stochiometric ratio of MgO and Al2O3powders was mixed and calcined within the temperatures range 1500-1800 oC to produce pure spinel phase. Thereafter pellets were crushed and treated in planetary ball mill for 60 minutes to obtained fine grain. All powders, calcined and milled, were examined for phase composition, crystal structure, and morphology. The obtained results showed that by increasing the temperature denser samples but more fragile have been synthesized. Milling for 1 hour leads to crumble of bigger particles and getting finer, single phase powders. XRPD and Raman spectroscopy showed disorder in crystal structure after milling.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019
T1  - Morphological and structural characterization of spinel MgAl2O4
SP  - 32
EP  - 32
UR  - https://hdl.handle.net/21.15107/rcub_dais_6779
ER  - 
@conference{
author = "Filipović, Suzana and Obradović, Nina and Fahrenholtz, William G. and Marinković, Bojan A. and Rogan, Jelena and Lević, Steva and Pavlović, Vladimir B.",
year = "2019",
abstract = "Magnesium aluminate has spinel structure and very good mechanical, chemical, and thermal properties. Owing to these properties, it has a wide range of applications including refractory ceramics, optically transparent ceramic windows and armors. Its low dielectric permeability and low loss tangent enable its using for integrated electronic devices, as well. Furthermore, as a porous ceramic, magnesium aluminate has important application as humidity sensor, catalyst and filter for waste water purification. In this paper, synthesis and characterization of MgAl2O4 was performed. Stochiometric ratio of MgO and Al2O3powders was mixed and calcined within the temperatures range 1500-1800 oC to produce pure spinel phase. Thereafter pellets were crushed and treated in planetary ball mill for 60 minutes to obtained fine grain. All powders, calcined and milled, were examined for phase composition, crystal structure, and morphology. The obtained results showed that by increasing the temperature denser samples but more fragile have been synthesized. Milling for 1 hour leads to crumble of bigger particles and getting finer, single phase powders. XRPD and Raman spectroscopy showed disorder in crystal structure after milling.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019",
title = "Morphological and structural characterization of spinel MgAl2O4",
pages = "32-32",
url = "https://hdl.handle.net/21.15107/rcub_dais_6779"
}
Filipović, S., Obradović, N., Fahrenholtz, W. G., Marinković, B. A., Rogan, J., Lević, S.,& Pavlović, V. B.. (2019). Morphological and structural characterization of spinel MgAl2O4. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019
Belgrade : Serbian Ceramic Society., 32-32.
https://hdl.handle.net/21.15107/rcub_dais_6779
Filipović S, Obradović N, Fahrenholtz WG, Marinković BA, Rogan J, Lević S, Pavlović VB. Morphological and structural characterization of spinel MgAl2O4. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019. 2019;:32-32.
https://hdl.handle.net/21.15107/rcub_dais_6779 .
Filipović, Suzana, Obradović, Nina, Fahrenholtz, William G., Marinković, Bojan A., Rogan, Jelena, Lević, Steva, Pavlović, Vladimir B., "Morphological and structural characterization of spinel MgAl2O4" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019 (2019):32-32,
https://hdl.handle.net/21.15107/rcub_dais_6779 .

Influence of mechanical activation on kinetics and formation of spinel monitored by DTA

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Marković, Smilja; Blagojević, Vladimir A.; Lević, Steva; Đorđević, Antonije; Pavlović, Vladimir B.

(Central and Eastern European Committee for Thermal Analysis and Calorimetry, 2019)

TY  - CONF
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Marković, Smilja
AU  - Blagojević, Vladimir A.
AU  - Lević, Steva
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/7020
AB  - Magnesium aluminate and other alumina-based spinels are refractory ceramics with excellent properties, such as high hardness, high mechanical strength, and low dielectric constant, applicable in many modern industries. MgAl2O4 was produced by solid state reaction between MgO and alpha-Al2O3 powders. Mechanical activation represents a very efficient method for increasing the reactivity of powders, accelerating chemical reactions and decreasing the sintering temperatures. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 60 minutes. Sintering was performed in air at temperatures ranging from 1200°C to 1600 °C with a 2 h dwell time. Initial powders and sintered samples were characterized using X-ray diffraction and scanning electron microscopy. Differential thermal analysis (DTA) and thermal gravimetry (TG) were used to determine the temperatures for synthesis reactions and phase transformations. Based on the DTA results, several different processes occured during heating, including evaporation of physisorbed water, decomposition of Mg(OH)2, and spinel formation. With mechanical activation, all characteristic temperatures shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of sintering temperature for all of the sintered specimens.
PB  - Central and Eastern European Committee for Thermal Analysis and Calorimetry
C3  - Book of abstracts of the 5th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC5) and 14th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2019)
T1  - Influence of mechanical activation on kinetics and formation of spinel monitored by DTA
SP  - 70
EP  - 70
UR  - https://hdl.handle.net/21.15107/rcub_dais_7020
ER  - 
@conference{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Marković, Smilja and Blagojević, Vladimir A. and Lević, Steva and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2019",
abstract = "Magnesium aluminate and other alumina-based spinels are refractory ceramics with excellent properties, such as high hardness, high mechanical strength, and low dielectric constant, applicable in many modern industries. MgAl2O4 was produced by solid state reaction between MgO and alpha-Al2O3 powders. Mechanical activation represents a very efficient method for increasing the reactivity of powders, accelerating chemical reactions and decreasing the sintering temperatures. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 60 minutes. Sintering was performed in air at temperatures ranging from 1200°C to 1600 °C with a 2 h dwell time. Initial powders and sintered samples were characterized using X-ray diffraction and scanning electron microscopy. Differential thermal analysis (DTA) and thermal gravimetry (TG) were used to determine the temperatures for synthesis reactions and phase transformations. Based on the DTA results, several different processes occured during heating, including evaporation of physisorbed water, decomposition of Mg(OH)2, and spinel formation. With mechanical activation, all characteristic temperatures shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of sintering temperature for all of the sintered specimens.",
publisher = "Central and Eastern European Committee for Thermal Analysis and Calorimetry",
journal = "Book of abstracts of the 5th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC5) and 14th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2019)",
title = "Influence of mechanical activation on kinetics and formation of spinel monitored by DTA",
pages = "70-70",
url = "https://hdl.handle.net/21.15107/rcub_dais_7020"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Marković, S., Blagojević, V. A., Lević, S., Đorđević, A.,& Pavlović, V. B.. (2019). Influence of mechanical activation on kinetics and formation of spinel monitored by DTA. in Book of abstracts of the 5th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC5) and 14th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2019)
Central and Eastern European Committee for Thermal Analysis and Calorimetry., 70-70.
https://hdl.handle.net/21.15107/rcub_dais_7020
Obradović N, Fahrenholtz WG, Filipović S, Marković S, Blagojević VA, Lević S, Đorđević A, Pavlović VB. Influence of mechanical activation on kinetics and formation of spinel monitored by DTA. in Book of abstracts of the 5th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC5) and 14th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2019). 2019;:70-70.
https://hdl.handle.net/21.15107/rcub_dais_7020 .
Obradović, Nina, Fahrenholtz, William G., Filipović, Suzana, Marković, Smilja, Blagojević, Vladimir A., Lević, Steva, Đorđević, Antonije, Pavlović, Vladimir B., "Influence of mechanical activation on kinetics and formation of spinel monitored by DTA" in Book of abstracts of the 5th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC5) and 14th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2019) (2019):70-70,
https://hdl.handle.net/21.15107/rcub_dais_7020 .

Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure

Filipović, Suzana; Pavlović, Vera P.; Mitrić, Miodrag; Lević, Steva; Mitrović, Nebojša; Maričić, Aleksa; Vlahović, Branislav; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Lević, Steva
AU  - Mitrović, Nebojša
AU  - Maričić, Aleksa
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://doi.org/10.1007/s40145-018-0301-5
UR  - http://dais.sanu.ac.rs/123456789/5271
AB  - Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.
PB  - Springer
T2  - Journal of Advanced Ceramics
T1  - Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure
SP  - 133
EP  - 147
VL  - 8
IS  - 1
DO  - 10.1007/s40145-018-0301-5
UR  - https://hdl.handle.net/21.15107/rcub_dais_5271
ER  - 
@article{
author = "Filipović, Suzana and Pavlović, Vera P. and Mitrić, Miodrag and Lević, Steva and Mitrović, Nebojša and Maričić, Aleksa and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.",
publisher = "Springer",
journal = "Journal of Advanced Ceramics",
title = "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure",
pages = "133-147",
volume = "8",
number = "1",
doi = "10.1007/s40145-018-0301-5",
url = "https://hdl.handle.net/21.15107/rcub_dais_5271"
}
Filipović, S., Pavlović, V. P., Mitrić, M., Lević, S., Mitrović, N., Maričić, A., Vlahović, B.,& Pavlović, V. B.. (2019). Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. in Journal of Advanced Ceramics
Springer., 8(1), 133-147.
https://doi.org/10.1007/s40145-018-0301-5
https://hdl.handle.net/21.15107/rcub_dais_5271
Filipović S, Pavlović VP, Mitrić M, Lević S, Mitrović N, Maričić A, Vlahović B, Pavlović VB. Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. in Journal of Advanced Ceramics. 2019;8(1):133-147.
doi:10.1007/s40145-018-0301-5
https://hdl.handle.net/21.15107/rcub_dais_5271 .
Filipović, Suzana, Pavlović, Vera P., Mitrić, Miodrag, Lević, Steva, Mitrović, Nebojša, Maričić, Aleksa, Vlahović, Branislav, Pavlović, Vladimir B., "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure" in Journal of Advanced Ceramics, 8, no. 1 (2019):133-147,
https://doi.org/10.1007/s40145-018-0301-5 .,
https://hdl.handle.net/21.15107/rcub_dais_5271 .
1
6
7
6

The effect of ball milling on properties of sintered manganese-doped alumina

Filipović, Suzana; Obradović, Nina; Marković, Smilja; Mitrić, Miodrag; Balać, Igor; Đorđević, Antonije; Pavlović, Vladimir B.

(Elsevier, 2019)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Marković, Smilja
AU  - Mitrić, Miodrag
AU  - Balać, Igor
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0921883119302596
UR  - http://dais.sanu.ac.rs/123456789/6951
AB  - Alumina-based compounds have many technological applications and attract great attention even after decades of investigation, due to their good chemical, electrical, and mechanical properties. A mixture of several alumina modifications (α-, κ-, γ-Al2O3) doped with 1 wt% of Mn2O3 was used for this experiment. The powder was mechanically activated for 60 min in an ethanol medium. After compaction, green bodies were sintered in the temperature range from 1200 to 1400 °C. Microstructures of the obtained specimens were investigated by scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS). The influence of morphological changes on electrical and mechanical properties was examined in detail. We have developed a test fixture and corresponding software for measurement of the relative dielectric permittivity and the loss tangent of ceramic specimens. This new method overcomes the problems of dimensions and shape of samples, as well as the problem of applying silver paste. The accuracy is around 2% for ε'r and 0.003 for tanδ. We demonstrate that the mechanical activation (MA) has the dominant influence on lowering the characteristic temperatures and microstructure development, which further leads to increased permittivity and tensile strength.
PB  - Elsevier
T2  - Advanced Powder Technology
T1  - The effect of ball milling on properties of sintered manganese-doped alumina
SP  - 2533
EP  - 2540
VL  - 30
IS  - 11
DO  - 10.1016/j.apt.2019.07.033
UR  - https://hdl.handle.net/21.15107/rcub_dais_6951
ER  - 
@article{
author = "Filipović, Suzana and Obradović, Nina and Marković, Smilja and Mitrić, Miodrag and Balać, Igor and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2019",
abstract = "Alumina-based compounds have many technological applications and attract great attention even after decades of investigation, due to their good chemical, electrical, and mechanical properties. A mixture of several alumina modifications (α-, κ-, γ-Al2O3) doped with 1 wt% of Mn2O3 was used for this experiment. The powder was mechanically activated for 60 min in an ethanol medium. After compaction, green bodies were sintered in the temperature range from 1200 to 1400 °C. Microstructures of the obtained specimens were investigated by scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS). The influence of morphological changes on electrical and mechanical properties was examined in detail. We have developed a test fixture and corresponding software for measurement of the relative dielectric permittivity and the loss tangent of ceramic specimens. This new method overcomes the problems of dimensions and shape of samples, as well as the problem of applying silver paste. The accuracy is around 2% for ε'r and 0.003 for tanδ. We demonstrate that the mechanical activation (MA) has the dominant influence on lowering the characteristic temperatures and microstructure development, which further leads to increased permittivity and tensile strength.",
publisher = "Elsevier",
journal = "Advanced Powder Technology",
title = "The effect of ball milling on properties of sintered manganese-doped alumina",
pages = "2533-2540",
volume = "30",
number = "11",
doi = "10.1016/j.apt.2019.07.033",
url = "https://hdl.handle.net/21.15107/rcub_dais_6951"
}
Filipović, S., Obradović, N., Marković, S., Mitrić, M., Balać, I., Đorđević, A.,& Pavlović, V. B.. (2019). The effect of ball milling on properties of sintered manganese-doped alumina. in Advanced Powder Technology
Elsevier., 30(11), 2533-2540.
https://doi.org/10.1016/j.apt.2019.07.033
https://hdl.handle.net/21.15107/rcub_dais_6951
Filipović S, Obradović N, Marković S, Mitrić M, Balać I, Đorđević A, Pavlović VB. The effect of ball milling on properties of sintered manganese-doped alumina. in Advanced Powder Technology. 2019;30(11):2533-2540.
doi:10.1016/j.apt.2019.07.033
https://hdl.handle.net/21.15107/rcub_dais_6951 .
Filipović, Suzana, Obradović, Nina, Marković, Smilja, Mitrić, Miodrag, Balać, Igor, Đorđević, Antonije, Pavlović, Vladimir B., "The effect of ball milling on properties of sintered manganese-doped alumina" in Advanced Powder Technology, 30, no. 11 (2019):2533-2540,
https://doi.org/10.1016/j.apt.2019.07.033 .,
https://hdl.handle.net/21.15107/rcub_dais_6951 .
1
3
3

The effect of ball milling on properties of sintered manganese-doped alumina

Filipović, Suzana; Obradović, Nina; Marković, Smilja; Mitrić, Miodrag; Balać, Igor; Đorđević, Antonije; Pavlović, Vladimir B.

(Elsevier, 2019)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Marković, Smilja
AU  - Mitrić, Miodrag
AU  - Balać, Igor
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0921883119302596
UR  - http://dais.sanu.ac.rs/123456789/7027
AB  - Alumina-based compounds have many technological applications and attract great attention even after decades of investigation, due to their good chemical, electrical, and mechanical properties. A mixture of several alumina modifications (α-, κ-, γ-Al2O3) doped with 1 wt% of Mn2O3 was used for this experiment. The powder was mechanically activated for 60 min in an ethanol medium. After compaction, green bodies were sintered in the temperature range from 1200 to 1400 °C. Microstructures of the obtained specimens were investigated by scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS). The influence of morphological changes on electrical and mechanical properties was examined in detail. We have developed a test fixture and corresponding software for measurement of the relative dielectric permittivity and the loss tangent of ceramic specimens. This new method overcomes the problems of dimensions and shape of samples, as well as the problem of applying silver paste. The accuracy is around 2% for ε'r and 0.003 for tanδ. We demonstrate that the mechanical activation (MA) has the dominant influence on lowering the characteristic temperatures and microstructure development, which further leads to increased permittivity and tensile strength.
PB  - Elsevier
T2  - Advanced Powder Technology
T1  - The effect of ball milling on properties of sintered manganese-doped alumina
SP  - 2533
EP  - 2540
VL  - 30
IS  - 11
DO  - 10.1016/j.apt.2019.07.033
UR  - https://hdl.handle.net/21.15107/rcub_dais_7027
ER  - 
@article{
author = "Filipović, Suzana and Obradović, Nina and Marković, Smilja and Mitrić, Miodrag and Balać, Igor and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2019",
abstract = "Alumina-based compounds have many technological applications and attract great attention even after decades of investigation, due to their good chemical, electrical, and mechanical properties. A mixture of several alumina modifications (α-, κ-, γ-Al2O3) doped with 1 wt% of Mn2O3 was used for this experiment. The powder was mechanically activated for 60 min in an ethanol medium. After compaction, green bodies were sintered in the temperature range from 1200 to 1400 °C. Microstructures of the obtained specimens were investigated by scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS). The influence of morphological changes on electrical and mechanical properties was examined in detail. We have developed a test fixture and corresponding software for measurement of the relative dielectric permittivity and the loss tangent of ceramic specimens. This new method overcomes the problems of dimensions and shape of samples, as well as the problem of applying silver paste. The accuracy is around 2% for ε'r and 0.003 for tanδ. We demonstrate that the mechanical activation (MA) has the dominant influence on lowering the characteristic temperatures and microstructure development, which further leads to increased permittivity and tensile strength.",
publisher = "Elsevier",
journal = "Advanced Powder Technology",
title = "The effect of ball milling on properties of sintered manganese-doped alumina",
pages = "2533-2540",
volume = "30",
number = "11",
doi = "10.1016/j.apt.2019.07.033",
url = "https://hdl.handle.net/21.15107/rcub_dais_7027"
}
Filipović, S., Obradović, N., Marković, S., Mitrić, M., Balać, I., Đorđević, A.,& Pavlović, V. B.. (2019). The effect of ball milling on properties of sintered manganese-doped alumina. in Advanced Powder Technology
Elsevier., 30(11), 2533-2540.
https://doi.org/10.1016/j.apt.2019.07.033
https://hdl.handle.net/21.15107/rcub_dais_7027
Filipović S, Obradović N, Marković S, Mitrić M, Balać I, Đorđević A, Pavlović VB. The effect of ball milling on properties of sintered manganese-doped alumina. in Advanced Powder Technology. 2019;30(11):2533-2540.
doi:10.1016/j.apt.2019.07.033
https://hdl.handle.net/21.15107/rcub_dais_7027 .
Filipović, Suzana, Obradović, Nina, Marković, Smilja, Mitrić, Miodrag, Balać, Igor, Đorđević, Antonije, Pavlović, Vladimir B., "The effect of ball milling on properties of sintered manganese-doped alumina" in Advanced Powder Technology, 30, no. 11 (2019):2533-2540,
https://doi.org/10.1016/j.apt.2019.07.033 .,
https://hdl.handle.net/21.15107/rcub_dais_7027 .
1
3
3

Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Đorđević, Pavle; Rogan, Jelena; Pavlović, Vladimir B.

(The Ceramic Society of Japan, 2019)

TY  - CONF
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Đorđević, Pavle
AU  - Rogan, Jelena
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/7050
AB  - Magnesium aluminate and other alumina-based spinels attract attention due to their high hardness, high mechanical strength, and low dielectric constant. MgAl2O4 was produced by solid-state reaction between MgO and a-Al2O3 powders. Mechanical activation was used to increase the reactivity of powders and decrease the sintering temperatures. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 30, 60, 90, and 120 minutes. The resulting powders were characterized to determine the effect of activation on surface area, particle size, and crystallinity. Mechanical activation decreased particle size, increased surface area, and increased the width of peaks in x-ray diffraction. Dilatometry was used to monitor densification behavior up to 1500 °C. For non-activated powders, sintering started at approximately 1400 °C, while for activated powders, the onset temperature decreased to about 1340 °C. Mechanical activation is an efficient method to improve the densification behaviour of MgAl2O4 produced from mixed oxide powders.
PB  - The Ceramic Society of Japan
C3  - The 13th Pacific Rim Conference of Ceramic Societies (PACRIM13), October 27 - November 1, 2019, Okinawa Convention Center, Japan
T1  - Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel
SP  - 30-B1C-S13-14
UR  - https://hdl.handle.net/21.15107/rcub_dais_7050
ER  - 
@conference{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Đorđević, Pavle and Rogan, Jelena and Pavlović, Vladimir B.",
year = "2019",
abstract = "Magnesium aluminate and other alumina-based spinels attract attention due to their high hardness, high mechanical strength, and low dielectric constant. MgAl2O4 was produced by solid-state reaction between MgO and a-Al2O3 powders. Mechanical activation was used to increase the reactivity of powders and decrease the sintering temperatures. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 30, 60, 90, and 120 minutes. The resulting powders were characterized to determine the effect of activation on surface area, particle size, and crystallinity. Mechanical activation decreased particle size, increased surface area, and increased the width of peaks in x-ray diffraction. Dilatometry was used to monitor densification behavior up to 1500 °C. For non-activated powders, sintering started at approximately 1400 °C, while for activated powders, the onset temperature decreased to about 1340 °C. Mechanical activation is an efficient method to improve the densification behaviour of MgAl2O4 produced from mixed oxide powders.",
publisher = "The Ceramic Society of Japan",
journal = "The 13th Pacific Rim Conference of Ceramic Societies (PACRIM13), October 27 - November 1, 2019, Okinawa Convention Center, Japan",
title = "Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel",
pages = "30-B1C-S13-14",
url = "https://hdl.handle.net/21.15107/rcub_dais_7050"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Đorđević, P., Rogan, J.,& Pavlović, V. B.. (2019). Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel. in The 13th Pacific Rim Conference of Ceramic Societies (PACRIM13), October 27 - November 1, 2019, Okinawa Convention Center, Japan
The Ceramic Society of Japan., 30-B1C-S13-14.
https://hdl.handle.net/21.15107/rcub_dais_7050
Obradović N, Fahrenholtz WG, Filipović S, Đorđević P, Rogan J, Pavlović VB. Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel. in The 13th Pacific Rim Conference of Ceramic Societies (PACRIM13), October 27 - November 1, 2019, Okinawa Convention Center, Japan. 2019;:30-B1C-S13-14.
https://hdl.handle.net/21.15107/rcub_dais_7050 .
Obradović, Nina, Fahrenholtz, William G., Filipović, Suzana, Đorđević, Pavle, Rogan, Jelena, Pavlović, Vladimir B., "Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel" in The 13th Pacific Rim Conference of Ceramic Societies (PACRIM13), October 27 - November 1, 2019, Okinawa Convention Center, Japan (2019):30-B1C-S13-14,
https://hdl.handle.net/21.15107/rcub_dais_7050 .

The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Kosanović, Darko; Dapčević, Aleksandra; Rogan, Jelena; Pavlović, Vladimir B.

(Societa ceramica italiana, 2019)

TY  - CONF
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Kosanović, Darko
AU  - Dapčević, Aleksandra
AU  - Rogan, Jelena
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/7022
AB  - Magnesium aluminate, MgAl2O4, and other alumina-based spinels are refractory ceramics with high hardness and resistance to chemical attack while also being possible microwave dielectrics. Pure MgAl2O4 can be optically transparent when fully dense. Spinels exhibit inversion, which results in disorder among occupancy of A and B site cations. The goal of this study was to examine the effects of mechanical activation and composition on the temperature required for spinel formation and the site occupancy in the resulting spinel. 
MgAl2O4 was produced by solid state reaction between MgO and alpha-Al2O3. The starting powders were mixed by ball milling to homogenize the powders without significant particle size reduction. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 1 h. Powders were compacted at 300 MPa. Heat treatments were performed in air, at temperatures ranging from 1200 to 1500 °C with 2 h dwell time, to determine the amount of spinel formation as a function of temperature. Phase composition and microstructure of initial powders and heated samples were determined by means of X-ray diffraction, particle size analysis, and scanning electron microscopy. The influence of milling and consolidation parameters were studied by electrical measurements and mechanical characterization. 
The main results of this study were that mechanical activation for 60 minutes initiated a mechano-chemical reaction, and resulted in spinel formation at much lower temperatures than within non-activated powders. Microstructures of ceramics sintered below 1400 oC indicated that final stage sintering started at much lower temperatures for activated samples than for non-activated samples. 
Changes in microstructure parameters, as a consequence of mechanical treatment and subsequent heating of investigated powder mixtures, strongly affect electrical and mechanical properties of the final ceramics.
PB  - Societa ceramica italiana
PB  - Politecnico di Torino
C3  - Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019
T1  - The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics
SP  - 262
EP  - 262
UR  - https://hdl.handle.net/21.15107/rcub_dais_7022
ER  - 
@conference{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Kosanović, Darko and Dapčević, Aleksandra and Rogan, Jelena and Pavlović, Vladimir B.",
year = "2019",
abstract = "Magnesium aluminate, MgAl2O4, and other alumina-based spinels are refractory ceramics with high hardness and resistance to chemical attack while also being possible microwave dielectrics. Pure MgAl2O4 can be optically transparent when fully dense. Spinels exhibit inversion, which results in disorder among occupancy of A and B site cations. The goal of this study was to examine the effects of mechanical activation and composition on the temperature required for spinel formation and the site occupancy in the resulting spinel. 
MgAl2O4 was produced by solid state reaction between MgO and alpha-Al2O3. The starting powders were mixed by ball milling to homogenize the powders without significant particle size reduction. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 1 h. Powders were compacted at 300 MPa. Heat treatments were performed in air, at temperatures ranging from 1200 to 1500 °C with 2 h dwell time, to determine the amount of spinel formation as a function of temperature. Phase composition and microstructure of initial powders and heated samples were determined by means of X-ray diffraction, particle size analysis, and scanning electron microscopy. The influence of milling and consolidation parameters were studied by electrical measurements and mechanical characterization. 
The main results of this study were that mechanical activation for 60 minutes initiated a mechano-chemical reaction, and resulted in spinel formation at much lower temperatures than within non-activated powders. Microstructures of ceramics sintered below 1400 oC indicated that final stage sintering started at much lower temperatures for activated samples than for non-activated samples. 
Changes in microstructure parameters, as a consequence of mechanical treatment and subsequent heating of investigated powder mixtures, strongly affect electrical and mechanical properties of the final ceramics.",
publisher = "Societa ceramica italiana, Politecnico di Torino",
journal = "Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019",
title = "The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics",
pages = "262-262",
url = "https://hdl.handle.net/21.15107/rcub_dais_7022"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Kosanović, D., Dapčević, A., Rogan, J.,& Pavlović, V. B.. (2019). The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics. in Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019
Societa ceramica italiana., 262-262.
https://hdl.handle.net/21.15107/rcub_dais_7022
Obradović N, Fahrenholtz WG, Filipović S, Kosanović D, Dapčević A, Rogan J, Pavlović VB. The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics. in Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019. 2019;:262-262.
https://hdl.handle.net/21.15107/rcub_dais_7022 .
Obradović, Nina, Fahrenholtz, William G., Filipović, Suzana, Kosanović, Darko, Dapčević, Aleksandra, Rogan, Jelena, Pavlović, Vladimir B., "The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics" in Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019 (2019):262-262,
https://hdl.handle.net/21.15107/rcub_dais_7022 .