TY  - JOUR
AU  - Terzić, Anja
AU  - Obradović, Nina
AU  - Kosanović, Darko
AU  - Stojanović, Jovica
AU  - Đorđević, Antonije
AU  - Andrić, Ljubiša
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0272884218329262
UR  - https://dais.sanu.ac.rs/123456789/4635
AB  - Steatite, as ceramic with composition predominantly resting on magnesium silicate, was produced from economic resources – talc, aluminosilicate clays, and either BaCO3 or feldspar as flux. Titanium dioxide was a doping agent. Four steatite mixtures were mechanically activated in a planetary ball mill for 30, 45 or 60 min, prior to the thermal treatment. Two-step sintering with initial phase set at 1350 °C and holding period conducted at 1250 °C was applied to initiate diffusion and prevent grain growth. Thereby, a high density ceramic material with low-porous submicron structure was acquired. The effects of TiO2 addition on densification, microstructure, and dielectric characteristics of steatites were monitored. The thermal stability of green mixtures was tested by differential thermal and thermogravimetric analyses. Changes in crystallinity and mineral phase composition were observed by the X-ray diffraction technique. Microstructural visualization with spatial arrangements of individual chemical elements on surface of the sintered ceramics was acquired by scanning electron microscopy accompanied with EDS mapping. In order to test the possibility of employment of the obtained steatites in insulation materials, electrical measurements were conducted by recording variations of the dielectric constant and loss tangent as a function of alternations in the mix-design and the mechanical activation period.
PB  - Elsevier
T2  - Ceramics International
T1  - Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics
SP  - 3013
EP  - 3022
VL  - 45
IS  - 3
DO  - 10.1016/j.ceramint.2018.10.120
UR  - https://hdl.handle.net/21.15107/rcub_dais_4635
ER  - 

@article{
author = "Terzić, Anja and Obradović, Nina and Kosanović, Darko and Stojanović, Jovica and Đorđević, Antonije and Andrić, Ljubiša and Pavlović, Vladimir B.",
year = "2019",
abstract = "Steatite, as ceramic with composition predominantly resting on magnesium silicate, was produced from economic resources – talc, aluminosilicate clays, and either BaCO3 or feldspar as flux. Titanium dioxide was a doping agent. Four steatite mixtures were mechanically activated in a planetary ball mill for 30, 45 or 60 min, prior to the thermal treatment. Two-step sintering with initial phase set at 1350 °C and holding period conducted at 1250 °C was applied to initiate diffusion and prevent grain growth. Thereby, a high density ceramic material with low-porous submicron structure was acquired. The effects of TiO2 addition on densification, microstructure, and dielectric characteristics of steatites were monitored. The thermal stability of green mixtures was tested by differential thermal and thermogravimetric analyses. Changes in crystallinity and mineral phase composition were observed by the X-ray diffraction technique. Microstructural visualization with spatial arrangements of individual chemical elements on surface of the sintered ceramics was acquired by scanning electron microscopy accompanied with EDS mapping. In order to test the possibility of employment of the obtained steatites in insulation materials, electrical measurements were conducted by recording variations of the dielectric constant and loss tangent as a function of alternations in the mix-design and the mechanical activation period.",
publisher = "Elsevier",
journal = "Ceramics International",
title = "Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics",
pages = "3013-3022",
volume = "45",
number = "3",
doi = "10.1016/j.ceramint.2018.10.120",
url = "https://hdl.handle.net/21.15107/rcub_dais_4635"
}

Terzić, A., Obradović, N., Kosanović, D., Stojanović, J., Đorđević, A., Andrić, L.,& Pavlović, V. B.. (2019). Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics. in Ceramics International
Elsevier., 45(3), 3013-3022.
https://doi.org/10.1016/j.ceramint.2018.10.120
https://hdl.handle.net/21.15107/rcub_dais_4635

Terzić A, Obradović N, Kosanović D, Stojanović J, Đorđević A, Andrić L, Pavlović VB. Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics. in Ceramics International. 2019;45(3):3013-3022.
doi:10.1016/j.ceramint.2018.10.120
https://hdl.handle.net/21.15107/rcub_dais_4635 .

Terzić, Anja, Obradović, Nina, Kosanović, Darko, Stojanović, Jovica, Đorđević, Antonije, Andrić, Ljubiša, Pavlović, Vladimir B., "Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics" in Ceramics International, 45, no. 3 (2019):3013-3022,
https://doi.org/10.1016/j.ceramint.2018.10.120 .,
https://hdl.handle.net/21.15107/rcub_dais_4635 .

TY  - JOUR
AU  - Terzić, Anja
AU  - Obradović, Nina
AU  - Kosanović, Darko
AU  - Stojanović, Jovica
AU  - Đorđević, Antonije
AU  - Andrić, Ljubiša
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0272884218329262
UR  - https://dais.sanu.ac.rs/123456789/4645
AB  - Steatite, as ceramic with composition predominantly resting on magnesium silicate, was produced from economic resources – talc, aluminosilicate clays, and either BaCO3 or feldspar as flux. Titanium dioxide was a doping agent. Four steatite mixtures were mechanically activated in a planetary ball mill for 30, 45 or 60 min, prior to the thermal treatment. Two-step sintering with initial phase set at 1350 °C and holding period conducted at 1250 °C was applied to initiate diffusion and prevent grain growth. Thereby, a high density ceramic material with low-porous submicron structure was acquired. The effects of TiO2 addition on densification, microstructure, and dielectric characteristics of steatites were monitored. The thermal stability of green mixtures was tested by differential thermal and thermogravimetric analyses. Changes in crystallinity and mineral phase composition were observed by the X-ray diffraction technique. Microstructural visualization with spatial arrangements of individual chemical elements on surface of the sintered ceramics was acquired by scanning electron microscopy accompanied with EDS mapping. In order to test the possibility of employment of the obtained steatites in insulation materials, electrical measurements were conducted by recording variations of the dielectric constant and loss tangent as a function of alternations in the mix-design and the mechanical activation period.
PB  - Elsevier
T2  - Ceramics International
T1  - Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics
SP  - 3013
EP  - 3022
VL  - 45
IS  - 3
DO  - 10.1016/j.ceramint.2018.10.120
UR  - https://hdl.handle.net/21.15107/rcub_dais_4645
ER  - 

@article{
author = "Terzić, Anja and Obradović, Nina and Kosanović, Darko and Stojanović, Jovica and Đorđević, Antonije and Andrić, Ljubiša and Pavlović, Vladimir B.",
year = "2019",
abstract = "Steatite, as ceramic with composition predominantly resting on magnesium silicate, was produced from economic resources – talc, aluminosilicate clays, and either BaCO3 or feldspar as flux. Titanium dioxide was a doping agent. Four steatite mixtures were mechanically activated in a planetary ball mill for 30, 45 or 60 min, prior to the thermal treatment. Two-step sintering with initial phase set at 1350 °C and holding period conducted at 1250 °C was applied to initiate diffusion and prevent grain growth. Thereby, a high density ceramic material with low-porous submicron structure was acquired. The effects of TiO2 addition on densification, microstructure, and dielectric characteristics of steatites were monitored. The thermal stability of green mixtures was tested by differential thermal and thermogravimetric analyses. Changes in crystallinity and mineral phase composition were observed by the X-ray diffraction technique. Microstructural visualization with spatial arrangements of individual chemical elements on surface of the sintered ceramics was acquired by scanning electron microscopy accompanied with EDS mapping. In order to test the possibility of employment of the obtained steatites in insulation materials, electrical measurements were conducted by recording variations of the dielectric constant and loss tangent as a function of alternations in the mix-design and the mechanical activation period.",
publisher = "Elsevier",
journal = "Ceramics International",
title = "Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics",
pages = "3013-3022",
volume = "45",
number = "3",
doi = "10.1016/j.ceramint.2018.10.120",
url = "https://hdl.handle.net/21.15107/rcub_dais_4645"
}

Terzić, A., Obradović, N., Kosanović, D., Stojanović, J., Đorđević, A., Andrić, L.,& Pavlović, V. B.. (2019). Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics. in Ceramics International
Elsevier., 45(3), 3013-3022.
https://doi.org/10.1016/j.ceramint.2018.10.120
https://hdl.handle.net/21.15107/rcub_dais_4645

Terzić A, Obradović N, Kosanović D, Stojanović J, Đorđević A, Andrić L, Pavlović VB. Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics. in Ceramics International. 2019;45(3):3013-3022.
doi:10.1016/j.ceramint.2018.10.120
https://hdl.handle.net/21.15107/rcub_dais_4645 .

Terzić, Anja, Obradović, Nina, Kosanović, Darko, Stojanović, Jovica, Đorđević, Antonije, Andrić, Ljubiša, Pavlović, Vladimir B., "Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics" in Ceramics International, 45, no. 3 (2019):3013-3022,
https://doi.org/10.1016/j.ceramint.2018.10.120 .,
https://hdl.handle.net/21.15107/rcub_dais_4645 .

TY  - JOUR
AU  - Terzić, Anja
AU  - Obradović, Nina
AU  - Pouchly, Vaclav
AU  - Stojanović, Jovica
AU  - Maca, Karel
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - https://dais.sanu.ac.rs/123456789/4536
AB  - The influence of the sintering method on the mineral phase transformations and development of the crystalline microstructure of steatite ceramics was investigated. The steatite samples were fabricated from talc and bentonite as low-cost raw materials. Feldspar and barium carbonate, as fluxing agents, were altered in the steatite composition. Dilatometric analysis was applied in the monitoring of the dimensional changes and thereby densification of steatite during the traditional sintering (TS) procedure up to 1200°C. Spark plasma sintering (SPS) method was used under the following sintering conditions: 100°C/min heating rate, uniaxial pressure of 50 MPa; sintering temperature 800°C/1 min or 1000°C/2 min. Crystallinity changes and mineral phase transition during sintering were observed by X-ray diffraction technique. Microstructural visualization of the samples and the spatial arrangements of individual chemical elements were achieved via scanning electron microscopy equipped with the EDS mapping. It was found that SPS sintering facilitated all microstructural changes during high temperature treatment and shifted them to lower temperatures. SPS treatment conducted at 1000°C resulted in maximum densification of the steatite powder compacts and the formation stabilized protoenstatite structure. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. ON 172057 and Grant no. III 45008]
PB  - Belgrade : ETRAN
T2  - Science of Sintering
T1  - Microstructure and phase composition of steatite ceramics sintered by traditional and spark plasma sintering
SP  - 299
EP  - 312
VL  - 50
IS  - 3
DO  - 10.2298/SOS1803299T
UR  - https://hdl.handle.net/21.15107/rcub_dais_4536
ER  - 

@article{
author = "Terzić, Anja and Obradović, Nina and Pouchly, Vaclav and Stojanović, Jovica and Maca, Karel and Pavlović, Vladimir B.",
year = "2018",
abstract = "The influence of the sintering method on the mineral phase transformations and development of the crystalline microstructure of steatite ceramics was investigated. The steatite samples were fabricated from talc and bentonite as low-cost raw materials. Feldspar and barium carbonate, as fluxing agents, were altered in the steatite composition. Dilatometric analysis was applied in the monitoring of the dimensional changes and thereby densification of steatite during the traditional sintering (TS) procedure up to 1200°C. Spark plasma sintering (SPS) method was used under the following sintering conditions: 100°C/min heating rate, uniaxial pressure of 50 MPa; sintering temperature 800°C/1 min or 1000°C/2 min. Crystallinity changes and mineral phase transition during sintering were observed by X-ray diffraction technique. Microstructural visualization of the samples and the spatial arrangements of individual chemical elements were achieved via scanning electron microscopy equipped with the EDS mapping. It was found that SPS sintering facilitated all microstructural changes during high temperature treatment and shifted them to lower temperatures. SPS treatment conducted at 1000°C resulted in maximum densification of the steatite powder compacts and the formation stabilized protoenstatite structure. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. ON 172057 and Grant no. III 45008]",
publisher = "Belgrade : ETRAN",
journal = "Science of Sintering",
title = "Microstructure and phase composition of steatite ceramics sintered by traditional and spark plasma sintering",
pages = "299-312",
volume = "50",
number = "3",
doi = "10.2298/SOS1803299T",
url = "https://hdl.handle.net/21.15107/rcub_dais_4536"
}

Terzić, A., Obradović, N., Pouchly, V., Stojanović, J., Maca, K.,& Pavlović, V. B.. (2018). Microstructure and phase composition of steatite ceramics sintered by traditional and spark plasma sintering. in Science of Sintering
Belgrade : ETRAN., 50(3), 299-312.
https://doi.org/10.2298/SOS1803299T
https://hdl.handle.net/21.15107/rcub_dais_4536

Terzić A, Obradović N, Pouchly V, Stojanović J, Maca K, Pavlović VB. Microstructure and phase composition of steatite ceramics sintered by traditional and spark plasma sintering. in Science of Sintering. 2018;50(3):299-312.
doi:10.2298/SOS1803299T
https://hdl.handle.net/21.15107/rcub_dais_4536 .

Terzić, Anja, Obradović, Nina, Pouchly, Vaclav, Stojanović, Jovica, Maca, Karel, Pavlović, Vladimir B., "Microstructure and phase composition of steatite ceramics sintered by traditional and spark plasma sintering" in Science of Sintering, 50, no. 3 (2018):299-312,
https://doi.org/10.2298/SOS1803299T .,
https://hdl.handle.net/21.15107/rcub_dais_4536 .

TY  - JOUR
AU  - Radosavljević-Mihajlović, Ana S.
AU  - Daković, Aleksandra S.
AU  - Kašić, Vladan
AU  - Mitić, Vojislav V.
AU  - Stojanović, Jovica N.
AU  - Sokić, Miroslav D.
AU  - Marković, Branislav R.
PY  - 2018
UR  - https://dais.sanu.ac.rs/123456789/5250
AB  - This paper presents mineralogical and crystallographic characterization of the zeolitic tuff from the Novakovic deposit, Republic of Bosnia and Herzegovina. The zeolitic tuff is of a whitish color composed of Ca-clinoptilolite and an amorphous phase (volcanic glass and amorphous SiO 2 ). The zeolitic tuff was analyzed by X-ray diffraction of the polycrystalline sample (XRPD), scanning electron microscopy and energy dispersive spectroscopy (SEM/EDS), and differential thermal and thermogravimetric (DTA/DTG) methods. According to the results obtained, it can be concluded that the studied zeolitic tuff is composed of Heu-type minerals. Based on the chemical analysis, thermal treatment and XRPD analysis it was determined that this is a mineral Ca-clinoptilolite. Thermal analysis in the temperature range from 300 up to 700°C showed that the examined zeolite minerals from the Novaković deposit are stable up to the temperature of 600°C. The crystal structure of Ca-clinoptilolite has been refined in the centrosymmetric space group C2/m (S.G. 12) with disordered distribution of Al and Si in the tetrahedral framework. The unit-cell parameters are as follows: a = 17.662 Å, b = 17.874 Å, c = 7.402 Å, β = 116.32° and V = 2122.73 Å 3 . The basic structural motif is represented by four channels. Three channels are composed of eight-membered rings, and one of ten-membered rings. The ten-membered (channel A) and one eight-membered channel (B) are parallel to the crystallographic axis c, and the other eight-membered channel is parallel to the a-axis. Ca-clinoptilolite comprises approximately 90 % of the studied zeolite tuff while the rest 10 % is the amorphous phase. The overall cation exchange capacity (CEC) amounts to 187 mmolM + / 100 g, and calcium represents the most abundant cation in the studied sample. The atomic ratios of Si/Al, Na + /(Na + +K + ), and Ca 2+ /(Ca 2+ +Mg 2+ ) are as follows: 4.36, 0.14, and 0.55, respectively. The zeolite tuff is both thermally and structurally stable and has applications in various areas of industry and agriculture. © 2018, Association of Chemists and Chemical Engineers of Serbia. All rights reserved.
PB  - Association of the Chemical Engineers of Serbia
T2  - Hemijska industrija
T1  - Mineraloške i kristalografske osobine zeolitskog tufa heu-tipa lokaliteta novaković, Bosna i Hercegovina
SP  - 371
EP  - 382
VL  - 72
IS  - 6
DO  - 10.2298/HEMIND180725026R
UR  - https://hdl.handle.net/21.15107/rcub_dais_5250
ER  - 

@article{
author = "Radosavljević-Mihajlović, Ana S. and Daković, Aleksandra S. and Kašić, Vladan and Mitić, Vojislav V. and Stojanović, Jovica N. and Sokić, Miroslav D. and Marković, Branislav R.",
year = "2018",
abstract = "This paper presents mineralogical and crystallographic characterization of the zeolitic tuff from the Novakovic deposit, Republic of Bosnia and Herzegovina. The zeolitic tuff is of a whitish color composed of Ca-clinoptilolite and an amorphous phase (volcanic glass and amorphous SiO 2 ). The zeolitic tuff was analyzed by X-ray diffraction of the polycrystalline sample (XRPD), scanning electron microscopy and energy dispersive spectroscopy (SEM/EDS), and differential thermal and thermogravimetric (DTA/DTG) methods. According to the results obtained, it can be concluded that the studied zeolitic tuff is composed of Heu-type minerals. Based on the chemical analysis, thermal treatment and XRPD analysis it was determined that this is a mineral Ca-clinoptilolite. Thermal analysis in the temperature range from 300 up to 700°C showed that the examined zeolite minerals from the Novaković deposit are stable up to the temperature of 600°C. The crystal structure of Ca-clinoptilolite has been refined in the centrosymmetric space group C2/m (S.G. 12) with disordered distribution of Al and Si in the tetrahedral framework. The unit-cell parameters are as follows: a = 17.662 Å, b = 17.874 Å, c = 7.402 Å, β = 116.32° and V = 2122.73 Å 3 . The basic structural motif is represented by four channels. Three channels are composed of eight-membered rings, and one of ten-membered rings. The ten-membered (channel A) and one eight-membered channel (B) are parallel to the crystallographic axis c, and the other eight-membered channel is parallel to the a-axis. Ca-clinoptilolite comprises approximately 90 % of the studied zeolite tuff while the rest 10 % is the amorphous phase. The overall cation exchange capacity (CEC) amounts to 187 mmolM + / 100 g, and calcium represents the most abundant cation in the studied sample. The atomic ratios of Si/Al, Na + /(Na + +K + ), and Ca 2+ /(Ca 2+ +Mg 2+ ) are as follows: 4.36, 0.14, and 0.55, respectively. The zeolite tuff is both thermally and structurally stable and has applications in various areas of industry and agriculture. © 2018, Association of Chemists and Chemical Engineers of Serbia. All rights reserved.",
publisher = "Association of the Chemical Engineers of Serbia",
journal = "Hemijska industrija",
title = "Mineraloške i kristalografske osobine zeolitskog tufa heu-tipa lokaliteta novaković, Bosna i Hercegovina",
pages = "371-382",
volume = "72",
number = "6",
doi = "10.2298/HEMIND180725026R",
url = "https://hdl.handle.net/21.15107/rcub_dais_5250"
}

Radosavljević-Mihajlović, A. S., Daković, A. S., Kašić, V., Mitić, V. V., Stojanović, J. N., Sokić, M. D.,& Marković, B. R.. (2018). Mineraloške i kristalografske osobine zeolitskog tufa heu-tipa lokaliteta novaković, Bosna i Hercegovina. in Hemijska industrija
Association of the Chemical Engineers of Serbia., 72(6), 371-382.
https://doi.org/10.2298/HEMIND180725026R
https://hdl.handle.net/21.15107/rcub_dais_5250

Radosavljević-Mihajlović AS, Daković AS, Kašić V, Mitić VV, Stojanović JN, Sokić MD, Marković BR. Mineraloške i kristalografske osobine zeolitskog tufa heu-tipa lokaliteta novaković, Bosna i Hercegovina. in Hemijska industrija. 2018;72(6):371-382.
doi:10.2298/HEMIND180725026R
https://hdl.handle.net/21.15107/rcub_dais_5250 .

Radosavljević-Mihajlović, Ana S., Daković, Aleksandra S., Kašić, Vladan, Mitić, Vojislav V., Stojanović, Jovica N., Sokić, Miroslav D., Marković, Branislav R., "Mineraloške i kristalografske osobine zeolitskog tufa heu-tipa lokaliteta novaković, Bosna i Hercegovina" in Hemijska industrija, 72, no. 6 (2018):371-382,
https://doi.org/10.2298/HEMIND180725026R .,
https://hdl.handle.net/21.15107/rcub_dais_5250 .

TY  - JOUR
AU  - Terzić, Anja
AU  - Obradović, Nina
AU  - Stojanović, Jovica
AU  - Pavlović, Vladimir B.
AU  - Andrić, Ljubiša
AU  - Olćan, Dragan
AU  - Đorđević, Antonije
PY  - 2017
UR  - https://dais.sanu.ac.rs/123456789/2356
AB  - The focus of the study was on providing insights into interconnections between sintering and development of the crystalline microstructure, and consequently variations in dielectric behavior of four steatites fabricated from a low-cost raw material, i.e. talc. The changes, induced by the alternations of the binders (bentonite, kaolin clay) and fluxing agents (BaCO3, feldspar), were monitored in the temperature range 1000° to 1250 °C in which complete densification and re-crystallization of the investigated structures were accomplished. The critical points in the synthesis of steatite materials were assessed by instrumental analyses. Crystallinity changes and mineral phase transition during sintering were monitored by X-ray diffraction technique. Microstructural visualization of the samples and the spatial arrangements of individual chemical elements were achieved via scanning electron microscopy accompanied with EDS mapping. The thermal stability was observed on the green mixtures using differential thermal and thermo gravimetric analyses. Electrical measurements recorded variations of the dielectric constant (εr) and loss tangent (tan δ) as a function of the sintering temperature. The investigation highlighted critical design points, as well as the optimal combinations of the raw materials for production of the steatite ceramics for advanced electrical engineering applications.
PB  - Elsevier
T2  - Ceramics International
T1  - Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials
SP  - 13264
EP  - 13275
VL  - 43
IS  - 16
DO  - 10.1016/j.ceramint.2017.07.024
UR  - https://hdl.handle.net/21.15107/rcub_dais_2356
ER  - 

@article{
author = "Terzić, Anja and Obradović, Nina and Stojanović, Jovica and Pavlović, Vladimir B. and Andrić, Ljubiša and Olćan, Dragan and Đorđević, Antonije",
year = "2017",
abstract = "The focus of the study was on providing insights into interconnections between sintering and development of the crystalline microstructure, and consequently variations in dielectric behavior of four steatites fabricated from a low-cost raw material, i.e. talc. The changes, induced by the alternations of the binders (bentonite, kaolin clay) and fluxing agents (BaCO3, feldspar), were monitored in the temperature range 1000° to 1250 °C in which complete densification and re-crystallization of the investigated structures were accomplished. The critical points in the synthesis of steatite materials were assessed by instrumental analyses. Crystallinity changes and mineral phase transition during sintering were monitored by X-ray diffraction technique. Microstructural visualization of the samples and the spatial arrangements of individual chemical elements were achieved via scanning electron microscopy accompanied with EDS mapping. The thermal stability was observed on the green mixtures using differential thermal and thermo gravimetric analyses. Electrical measurements recorded variations of the dielectric constant (εr) and loss tangent (tan δ) as a function of the sintering temperature. The investigation highlighted critical design points, as well as the optimal combinations of the raw materials for production of the steatite ceramics for advanced electrical engineering applications.",
publisher = "Elsevier",
journal = "Ceramics International",
title = "Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials",
pages = "13264-13275",
volume = "43",
number = "16",
doi = "10.1016/j.ceramint.2017.07.024",
url = "https://hdl.handle.net/21.15107/rcub_dais_2356"
}

Terzić, A., Obradović, N., Stojanović, J., Pavlović, V. B., Andrić, L., Olćan, D.,& Đorđević, A.. (2017). Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials. in Ceramics International
Elsevier., 43(16), 13264-13275.
https://doi.org/10.1016/j.ceramint.2017.07.024
https://hdl.handle.net/21.15107/rcub_dais_2356

Terzić A, Obradović N, Stojanović J, Pavlović VB, Andrić L, Olćan D, Đorđević A. Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials. in Ceramics International. 2017;43(16):13264-13275.
doi:10.1016/j.ceramint.2017.07.024
https://hdl.handle.net/21.15107/rcub_dais_2356 .

Terzić, Anja, Obradović, Nina, Stojanović, Jovica, Pavlović, Vladimir B., Andrić, Ljubiša, Olćan, Dragan, Đorđević, Antonije, "Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials" in Ceramics International, 43, no. 16 (2017):13264-13275,
https://doi.org/10.1016/j.ceramint.2017.07.024 .,
https://hdl.handle.net/21.15107/rcub_dais_2356 .

TY  - JOUR
AU  - Matijašević, Srđan
AU  - Zildžović, Snežana
AU  - Stojanović, Jovica
AU  - Đošić, Marija
AU  - Nikolić, Jelena
AU  - Stojanović, Mirjana
AU  - Labus, Nebojša
PY  - 2016
UR  - https://dais.sanu.ac.rs/123456789/899
AB  - Cilj ovog rada je prikaz mogućnosti primene prirodnog i modifikovanog zeolitskog minerala kao adsorbenta i materijala za sanaciju voda kontaminiranih uranijum jonom. Modifikovani uzorci zeolita dobijeni su tretiranjem prirodnog zeolita - klinoptilolita sa kiselinama: hlorovodoničnom, oksalnom i limunskom. Polazni i modifikovani zeoliti su okarakterisani hemijskom analizom, skenirajućom elektronskom mikroskopijom (SEM), rendgenskom analizom (XRPD), IC spektroskopijom, termičkom (TG/DTA) analizom i određivanjem kapaciteta katjonske izmene, a polazne i neadsorbovane količine uranijum jona su određene fluorimetrijski. Eksperimenti su sprovedeni da se ispita uticaj odnosa čvrsto/tečno, pH i vremena na adsorpciju uranijum jona na zeolitu. Utvrđeno je da tretman sa kiselinama zeolita povećava adsorpciju uranijum jona. Najviši indeks adsorpcije imao je uzorak zeolita modifikovan sa hlorovodoničnom kiselinom. Dobijeni rezultati adsorpcije na H-zeolitu su izračunati prema Langmirovom modelu.

Projekat MPNTR, br. 142057
Razvoj stakala sa kontrolisanim otpuštanjem jona za primenu u poljoprivredi i medicini (MPNTR - 34001)
AB  - The objective of this study was the review of natural zeolite, modified with acid, as a candidate material for the remediation of groundwater contaminated by uranium(VI). The modified zeolite samples were obtained by treatment of natural zeolite - clinoptilolite with acids: hydrochloric, oxalyc and citric. Starting and modified zeolites were characterized by chemical analysis, SEM, XRPD analysis, IR spectroscopy, thermal (TG/DT) analysis and by determination of cation exchange capacity, while starting and nonadsorbed amounts of uranium(VI) ion were determined by fluorometric method. Batch experiments were conducted to investigate the effect of solid/liquid ratio, pH and time on the U(VI) uptake by zeolite. Modification of zeolitic tuff with acids significantly increased adsorption of uranium(VI). The highest adsorption of uranium(VI) ion was achieved on clinoptilolite modified with hydrochloric acid. Uranium(VI) adsorption data for zeolite modified with hydrochloric acid was fitted to the Langmuir model.

Projekat MPNTR, br. 142057
The development of glasses with controlled ions release for application in agriculture and medicine (MESTD - 34001)
T2  - Zaštita materijala
T1  - Uklanjanje uranil-jona iz rastvora kiselo tretiranim zeolitima
SP  - 551
EP  - 558
VL  - 57
IS  - 4
DO  - 10.5937/ZasMat1604551M
UR  - https://hdl.handle.net/21.15107/rcub_dais_899
ER  - 

@article{
author = "Matijašević, Srđan and Zildžović, Snežana and Stojanović, Jovica and Đošić, Marija and Nikolić, Jelena and Stojanović, Mirjana and Labus, Nebojša",
year = "2016",
abstract = "Cilj ovog rada je prikaz mogućnosti primene prirodnog i modifikovanog zeolitskog minerala kao adsorbenta i materijala za sanaciju voda kontaminiranih uranijum jonom. Modifikovani uzorci zeolita dobijeni su tretiranjem prirodnog zeolita - klinoptilolita sa kiselinama: hlorovodoničnom, oksalnom i limunskom. Polazni i modifikovani zeoliti su okarakterisani hemijskom analizom, skenirajućom elektronskom mikroskopijom (SEM), rendgenskom analizom (XRPD), IC spektroskopijom, termičkom (TG/DTA) analizom i određivanjem kapaciteta katjonske izmene, a polazne i neadsorbovane količine uranijum jona su određene fluorimetrijski. Eksperimenti su sprovedeni da se ispita uticaj odnosa čvrsto/tečno, pH i vremena na adsorpciju uranijum jona na zeolitu. Utvrđeno je da tretman sa kiselinama zeolita povećava adsorpciju uranijum jona. Najviši indeks adsorpcije imao je uzorak zeolita modifikovan sa hlorovodoničnom kiselinom. Dobijeni rezultati adsorpcije na H-zeolitu su izračunati prema Langmirovom modelu.

Projekat MPNTR, br. 142057
Razvoj stakala sa kontrolisanim otpuštanjem jona za primenu u poljoprivredi i medicini (MPNTR - 34001), The objective of this study was the review of natural zeolite, modified with acid, as a candidate material for the remediation of groundwater contaminated by uranium(VI). The modified zeolite samples were obtained by treatment of natural zeolite - clinoptilolite with acids: hydrochloric, oxalyc and citric. Starting and modified zeolites were characterized by chemical analysis, SEM, XRPD analysis, IR spectroscopy, thermal (TG/DT) analysis and by determination of cation exchange capacity, while starting and nonadsorbed amounts of uranium(VI) ion were determined by fluorometric method. Batch experiments were conducted to investigate the effect of solid/liquid ratio, pH and time on the U(VI) uptake by zeolite. Modification of zeolitic tuff with acids significantly increased adsorption of uranium(VI). The highest adsorption of uranium(VI) ion was achieved on clinoptilolite modified with hydrochloric acid. Uranium(VI) adsorption data for zeolite modified with hydrochloric acid was fitted to the Langmuir model.

Projekat MPNTR, br. 142057
The development of glasses with controlled ions release for application in agriculture and medicine (MESTD - 34001)",
journal = "Zaštita materijala",
title = "Uklanjanje uranil-jona iz rastvora kiselo tretiranim zeolitima",
pages = "551-558",
volume = "57",
number = "4",
doi = "10.5937/ZasMat1604551M",
url = "https://hdl.handle.net/21.15107/rcub_dais_899"
}

Matijašević, S., Zildžović, S., Stojanović, J., Đošić, M., Nikolić, J., Stojanović, M.,& Labus, N.. (2016). Uklanjanje uranil-jona iz rastvora kiselo tretiranim zeolitima. in Zaštita materijala, 57(4), 551-558.
https://doi.org/10.5937/ZasMat1604551M
https://hdl.handle.net/21.15107/rcub_dais_899

Matijašević S, Zildžović S, Stojanović J, Đošić M, Nikolić J, Stojanović M, Labus N. Uklanjanje uranil-jona iz rastvora kiselo tretiranim zeolitima. in Zaštita materijala. 2016;57(4):551-558.
doi:10.5937/ZasMat1604551M
https://hdl.handle.net/21.15107/rcub_dais_899 .

Matijašević, Srđan, Zildžović, Snežana, Stojanović, Jovica, Đošić, Marija, Nikolić, Jelena, Stojanović, Mirjana, Labus, Nebojša, "Uklanjanje uranil-jona iz rastvora kiselo tretiranim zeolitima" in Zaštita materijala, 57, no. 4 (2016):551-558,
https://doi.org/10.5937/ZasMat1604551M .,
https://hdl.handle.net/21.15107/rcub_dais_899 .

TY  - JOUR
AU  - Terzić, Anja
AU  - Obradović, Nina
AU  - Andrić, Ljubiša
AU  - Stojanović, Jovica
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - https://dais.sanu.ac.rs/123456789/3545
AB  - The effects that the fly ash addition has on the behavior of thermally resistant corundum concrete were discussed. Experimental program implied production of two refractory composites: "referent" concrete from 20 % of high-aluminate cement and 80 % of corundum aggregate, "recycled" concrete from 10 % of high-aluminate cement, 20 % of lignite coal ash, and 70 % of corundum aggregate. The fly ash was mechanically activated by a vibratory disk mill. In the concrete matrix, the ash had a role of cement partial replacement and microfiller. The mechanical and thermal properties of the concretes were studied at temperatures ranging from ambient to 1,400 °C as adopted maximum. Mechanisms of thermally induced processes were observed by differential thermal analysis at 10, 20, and 30 °C min-1 heating rates. Referent and recycled concretes showed differences in calculated activation energies. The variations in refractory concretes performances were discussed with support of scanning electron microscope imagining and X-ray diffraction results. The recycled ash concrete exhibited properties that met the requirements for the castables, which proves it suitable for use in severe conditions at high temperature and highlights the reusing principle and possibility of cleaner and economically sustainable production. © 2014 Akadémiai Kiadó, Budapest, Hungary.
PB  - Springer Netherlands
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Investigation of thermally induced processes in corundum refractory concretes with addition of fly ash
SP  - 1339
EP  - 1352
VL  - 119
IS  - 2
DO  - 10.1007/s10973-014-4230-4
UR  - https://hdl.handle.net/21.15107/rcub_dais_3545
ER  - 

@article{
author = "Terzić, Anja and Obradović, Nina and Andrić, Ljubiša and Stojanović, Jovica and Pavlović, Vladimir B.",
year = "2015",
abstract = "The effects that the fly ash addition has on the behavior of thermally resistant corundum concrete were discussed. Experimental program implied production of two refractory composites: "referent" concrete from 20 % of high-aluminate cement and 80 % of corundum aggregate, "recycled" concrete from 10 % of high-aluminate cement, 20 % of lignite coal ash, and 70 % of corundum aggregate. The fly ash was mechanically activated by a vibratory disk mill. In the concrete matrix, the ash had a role of cement partial replacement and microfiller. The mechanical and thermal properties of the concretes were studied at temperatures ranging from ambient to 1,400 °C as adopted maximum. Mechanisms of thermally induced processes were observed by differential thermal analysis at 10, 20, and 30 °C min-1 heating rates. Referent and recycled concretes showed differences in calculated activation energies. The variations in refractory concretes performances were discussed with support of scanning electron microscope imagining and X-ray diffraction results. The recycled ash concrete exhibited properties that met the requirements for the castables, which proves it suitable for use in severe conditions at high temperature and highlights the reusing principle and possibility of cleaner and economically sustainable production. © 2014 Akadémiai Kiadó, Budapest, Hungary.",
publisher = "Springer Netherlands",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Investigation of thermally induced processes in corundum refractory concretes with addition of fly ash",
pages = "1339-1352",
volume = "119",
number = "2",
doi = "10.1007/s10973-014-4230-4",
url = "https://hdl.handle.net/21.15107/rcub_dais_3545"
}

Terzić, A., Obradović, N., Andrić, L., Stojanović, J.,& Pavlović, V. B.. (2015). Investigation of thermally induced processes in corundum refractory concretes with addition of fly ash. in Journal of Thermal Analysis and Calorimetry
Springer Netherlands., 119(2), 1339-1352.
https://doi.org/10.1007/s10973-014-4230-4
https://hdl.handle.net/21.15107/rcub_dais_3545

Terzić A, Obradović N, Andrić L, Stojanović J, Pavlović VB. Investigation of thermally induced processes in corundum refractory concretes with addition of fly ash. in Journal of Thermal Analysis and Calorimetry. 2015;119(2):1339-1352.
doi:10.1007/s10973-014-4230-4
https://hdl.handle.net/21.15107/rcub_dais_3545 .

Terzić, Anja, Obradović, Nina, Andrić, Ljubiša, Stojanović, Jovica, Pavlović, Vladimir B., "Investigation of thermally induced processes in corundum refractory concretes with addition of fly ash" in Journal of Thermal Analysis and Calorimetry, 119, no. 2 (2015):1339-1352,
https://doi.org/10.1007/s10973-014-4230-4 .,
https://hdl.handle.net/21.15107/rcub_dais_3545 .