Filipović, Suzana

Link to this page

Authority KeyName Variants
orcid::0000-0001-6383-8327
  • Filipović, Suzana (94)
  • Stevanović, Suzana (16)
Projects
Directed synthesis, structure and properties of multifunctional materials Investigation of the relation in triad: Synthesis structure-properties for functional materials
Ministry of Education, Youth and Sports (MEYS) of Czech Republic - CEITEC 2020 [LQ1601] Synthesis, processing and applications of nanostructured multifunctional materials with defined properties
United States National Aeronautics and Space Administration (NASA), Grant NNX09AV07A United States National Science Foundation (NSF) / Centers of Research Excellence in Science and Technology (CREST), Grant HRD-0833184
Grant Agency of the Czech Republic, Project 15-06390S Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200175 (Institute of Technical Sciences of SASA, Belgrade)
Zero- to Three-Dimensional Nanostructures for Application in Electronics and Renewable Energy Sources: Synthesis, Characterization and Processing Algorithms and software for frequency-domain and time-domain simulations of RF subsystems and electromagnetic sensors in ICT
Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200026 (University of Belgrade, Institute of Chemistry, Technology and Metallurgy - IChTM) Serbian Academy of Sciences and Arts, Project F-198
Czech Science Foundation (GACR) - 17-05620S Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200168 (University of Belgrade, Faculty of Chemistry)
United States National Science Foundation (NSF) / Partnerships for Research and Education in Materials (PREM), Grant 1523617 Bilateral cooperation between Serbia and France, No. 4510339/2016/09/03 “Inteligent econanomaterials and nanocomposites”
European Regional Development Fund through a project CEITEC, CZ.1.05/1.1.00/02.0068 Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200288 (Innovation Center of the Faculty of Chemistry)
Serbian Academy of Sciences and Arts, Project F-133 Serbian Academy of Sciences and Arts, Project F-197
Serbian Academy of Sciences and Arts, Project F-7 Serbian Academy of Sciences and Arts, Project F-7/II

Author's Bibliography

Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction

Filipović, Suzana; Obradović, Nina; Anđelković, Ljubica; Olćan, Dragan; Petrović, Jovana; Mirković, Miljana; Pavlović, Vladimir B.; Jeremić, Dejan; Vlahović, Branislav; Đorđević, Antonije

(Belgrade : International Institute for the Science of Sintering, 2021)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Anđelković, Ljubica
AU  - Olćan, Dragan
AU  - Petrović, Jovana
AU  - Mirković, Miljana
AU  - Pavlović, Vladimir B.
AU  - Jeremić, Dejan
AU  - Vlahović, Branislav
AU  - Đorđević, Antonije
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11230
AB  - Solid-state reaction between BaTiO3 and Fe2O3 was used to produce a multiferroic heterostructure composite. Commercial BaTiO3 and Fe(NO3)3•9H2O were suspended in ethanol for 30 minutes in an ultrasound bath. The prepared mixture was thermally processed at 300 oC for 6 h. Sintering at 1300 oC for 1 h resulted in a mixture of different phases, BaTiO3, BaFe12O19 and Ba12Ti28Fe15O84, which were confirmed by x-ray powder diffraction. A dense microstructure with a small volume fraction of closed porosity was indicated by the scanning electron microscopy, while a homogeneous distribution of Fe ions over BaTiO3 phase was visible from energy dispersive spectroscopy mapping. Doping of BaTiO3 with Fe2O3 resulted in formation of magnetic hexaferrite phases, as confirmed by dielectric measurements that showed a broadened maximum of the permittivity measured as a function of temperature.
PB  - Belgrade : International Institute for the Science of Sintering
T2  - Science of Sintering
T1  - Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction
SP  - 1
EP  - 8
VL  - 53
DO  - 10.2298/SOS2101001F
UR  - https://hdl.handle.net/21.15107/rcub_dais_11230
ER  - 
@article{
author = "Filipović, Suzana and Obradović, Nina and Anđelković, Ljubica and Olćan, Dragan and Petrović, Jovana and Mirković, Miljana and Pavlović, Vladimir B. and Jeremić, Dejan and Vlahović, Branislav and Đorđević, Antonije",
year = "2021",
abstract = "Solid-state reaction between BaTiO3 and Fe2O3 was used to produce a multiferroic heterostructure composite. Commercial BaTiO3 and Fe(NO3)3•9H2O were suspended in ethanol for 30 minutes in an ultrasound bath. The prepared mixture was thermally processed at 300 oC for 6 h. Sintering at 1300 oC for 1 h resulted in a mixture of different phases, BaTiO3, BaFe12O19 and Ba12Ti28Fe15O84, which were confirmed by x-ray powder diffraction. A dense microstructure with a small volume fraction of closed porosity was indicated by the scanning electron microscopy, while a homogeneous distribution of Fe ions over BaTiO3 phase was visible from energy dispersive spectroscopy mapping. Doping of BaTiO3 with Fe2O3 resulted in formation of magnetic hexaferrite phases, as confirmed by dielectric measurements that showed a broadened maximum of the permittivity measured as a function of temperature.",
publisher = "Belgrade : International Institute for the Science of Sintering",
journal = "Science of Sintering",
title = "Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction",
pages = "1-8",
volume = "53",
doi = "10.2298/SOS2101001F",
url = "https://hdl.handle.net/21.15107/rcub_dais_11230"
}
Filipović, S., Obradović, N., Anđelković, L., Olćan, D., Petrović, J., Mirković, M., Pavlović, V. B., Jeremić, D., Vlahović, B.,& Đorđević, A.. (2021). Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction. in Science of Sintering
Belgrade : International Institute for the Science of Sintering., 53, 1-8.
https://doi.org/10.2298/SOS2101001F
https://hdl.handle.net/21.15107/rcub_dais_11230
Filipović S, Obradović N, Anđelković L, Olćan D, Petrović J, Mirković M, Pavlović VB, Jeremić D, Vlahović B, Đorđević A. Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction. in Science of Sintering. 2021;53:1-8.
doi:10.2298/SOS2101001F
https://hdl.handle.net/21.15107/rcub_dais_11230 .
Filipović, Suzana, Obradović, Nina, Anđelković, Ljubica, Olćan, Dragan, Petrović, Jovana, Mirković, Miljana, Pavlović, Vladimir B., Jeremić, Dejan, Vlahović, Branislav, Đorđević, Antonije, "Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction" in Science of Sintering, 53 (2021):1-8,
https://doi.org/10.2298/SOS2101001F .,
https://hdl.handle.net/21.15107/rcub_dais_11230 .

The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods

Šuljagić, Marija; Vulić, Predrag; Jeremić, Dejan; Pavlović, Vladimir B.; Filipović, Suzana; Kilanski, Lukasz; Lewinska, Sabina; Slawska-Waniewska, Anna; Milenković, Milica; Nikolić, Aleksandar S.; Anđelković, Ljubica

(Elsevier, 2021)

TY  - JOUR
AU  - Šuljagić, Marija
AU  - Vulić, Predrag
AU  - Jeremić, Dejan
AU  - Pavlović, Vladimir B.
AU  - Filipović, Suzana
AU  - Kilanski, Lukasz
AU  - Lewinska, Sabina
AU  - Slawska-Waniewska, Anna
AU  - Milenković, Milica
AU  - Nikolić, Aleksandar S.
AU  - Anđelković, Ljubica
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/9515
AB  - To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.
PB  - Elsevier
T2  - Materials Research Bulletin
T1  - The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods
SP  - 111117
VL  - 134
DO  - 10.1016/j.materresbull.2020.111117
UR  - https://hdl.handle.net/21.15107/rcub_dais_9515
ER  - 
@article{
author = "Šuljagić, Marija and Vulić, Predrag and Jeremić, Dejan and Pavlović, Vladimir B. and Filipović, Suzana and Kilanski, Lukasz and Lewinska, Sabina and Slawska-Waniewska, Anna and Milenković, Milica and Nikolić, Aleksandar S. and Anđelković, Ljubica",
year = "2021",
abstract = "To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.",
publisher = "Elsevier",
journal = "Materials Research Bulletin",
title = "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods",
pages = "111117",
volume = "134",
doi = "10.1016/j.materresbull.2020.111117",
url = "https://hdl.handle.net/21.15107/rcub_dais_9515"
}
Šuljagić, M., Vulić, P., Jeremić, D., Pavlović, V. B., Filipović, S., Kilanski, L., Lewinska, S., Slawska-Waniewska, A., Milenković, M., Nikolić, A. S.,& Anđelković, L.. (2021). The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. in Materials Research Bulletin
Elsevier., 134, 111117.
https://doi.org/10.1016/j.materresbull.2020.111117
https://hdl.handle.net/21.15107/rcub_dais_9515
Šuljagić M, Vulić P, Jeremić D, Pavlović VB, Filipović S, Kilanski L, Lewinska S, Slawska-Waniewska A, Milenković M, Nikolić AS, Anđelković L. The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. in Materials Research Bulletin. 2021;134:111117.
doi:10.1016/j.materresbull.2020.111117
https://hdl.handle.net/21.15107/rcub_dais_9515 .
Šuljagić, Marija, Vulić, Predrag, Jeremić, Dejan, Pavlović, Vladimir B., Filipović, Suzana, Kilanski, Lukasz, Lewinska, Sabina, Slawska-Waniewska, Anna, Milenković, Milica, Nikolić, Aleksandar S., Anđelković, Ljubica, "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods" in Materials Research Bulletin, 134 (2021):111117,
https://doi.org/10.1016/j.materresbull.2020.111117 .,
https://hdl.handle.net/21.15107/rcub_dais_9515 .
3
2
2

The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods

Šuljagić, Marija; Vulić, Predrag; Jeremić, Dejan; Pavlović, Vladimir B.; Filipović, Suzana; Kilanski, Lukasz; Lewinska, Sabina; Slawska-Waniewska, Anna; Milenković, Milica; Nikolić, Aleksandar S.; Anđelković, Ljubica

(Elsevier, 2021)

TY  - JOUR
AU  - Šuljagić, Marija
AU  - Vulić, Predrag
AU  - Jeremić, Dejan
AU  - Pavlović, Vladimir B.
AU  - Filipović, Suzana
AU  - Kilanski, Lukasz
AU  - Lewinska, Sabina
AU  - Slawska-Waniewska, Anna
AU  - Milenković, Milica
AU  - Nikolić, Aleksandar S.
AU  - Anđelković, Ljubica
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/9514
AB  - To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.
PB  - Elsevier
T2  - Materials Research Bulletin
T1  - The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods
SP  - 111117
VL  - 134
DO  - 10.1016/j.materresbull.2020.111117
UR  - https://hdl.handle.net/21.15107/rcub_dais_9514
ER  - 
@article{
author = "Šuljagić, Marija and Vulić, Predrag and Jeremić, Dejan and Pavlović, Vladimir B. and Filipović, Suzana and Kilanski, Lukasz and Lewinska, Sabina and Slawska-Waniewska, Anna and Milenković, Milica and Nikolić, Aleksandar S. and Anđelković, Ljubica",
year = "2021",
abstract = "To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.",
publisher = "Elsevier",
journal = "Materials Research Bulletin",
title = "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods",
pages = "111117",
volume = "134",
doi = "10.1016/j.materresbull.2020.111117",
url = "https://hdl.handle.net/21.15107/rcub_dais_9514"
}
Šuljagić, M., Vulić, P., Jeremić, D., Pavlović, V. B., Filipović, S., Kilanski, L., Lewinska, S., Slawska-Waniewska, A., Milenković, M., Nikolić, A. S.,& Anđelković, L.. (2021). The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. in Materials Research Bulletin
Elsevier., 134, 111117.
https://doi.org/10.1016/j.materresbull.2020.111117
https://hdl.handle.net/21.15107/rcub_dais_9514
Šuljagić M, Vulić P, Jeremić D, Pavlović VB, Filipović S, Kilanski L, Lewinska S, Slawska-Waniewska A, Milenković M, Nikolić AS, Anđelković L. The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. in Materials Research Bulletin. 2021;134:111117.
doi:10.1016/j.materresbull.2020.111117
https://hdl.handle.net/21.15107/rcub_dais_9514 .
Šuljagić, Marija, Vulić, Predrag, Jeremić, Dejan, Pavlović, Vladimir B., Filipović, Suzana, Kilanski, Lukasz, Lewinska, Sabina, Slawska-Waniewska, Anna, Milenković, Milica, Nikolić, Aleksandar S., Anđelković, Ljubica, "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods" in Materials Research Bulletin, 134 (2021):111117,
https://doi.org/10.1016/j.materresbull.2020.111117 .,
https://hdl.handle.net/21.15107/rcub_dais_9514 .
3
2
2

Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Marković, Smilja; Blagojević, Vladimir A.; Lević, Steva; Savić, Slobodan; Đorđević, Antonije; Pavlović, Vladimir B.

(Springer, 2020)

TY  - JOUR
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Marković, Smilja
AU  - Blagojević, Vladimir A.
AU  - Lević, Steva
AU  - Savić, Slobodan
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10027
AB  - Solid-state mechanical activation of MgO and α-Al2O3 powders was used to produce MgAl2O4. The cation site occupancy in the resulting MgAl2O4 spinel was investigated using different methods. Differential thermal analysis and thermal gravimetry showed that mechanical activation reduced the spinel formation temperature by around 200 °C, and the corresponding activation energy by about 25%. In addition, characteristic temperatures for evaporation of physisorbed water and decomposition of Mg(OH)2 shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of the sintering temperature for all of the sintered specimens, indicating that the breaking point for ordering of the crystal structure was around 1500 °C for non-activated samples, and 1400 °C for activated samples.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics
SP  - 95
EP  - 107
VL  - 140
DO  - 10.1007/s10973-019-08846-w
UR  - https://hdl.handle.net/21.15107/rcub_dais_10027
ER  - 
@article{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Marković, Smilja and Blagojević, Vladimir A. and Lević, Steva and Savić, Slobodan and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2020",
abstract = "Solid-state mechanical activation of MgO and α-Al2O3 powders was used to produce MgAl2O4. The cation site occupancy in the resulting MgAl2O4 spinel was investigated using different methods. Differential thermal analysis and thermal gravimetry showed that mechanical activation reduced the spinel formation temperature by around 200 °C, and the corresponding activation energy by about 25%. In addition, characteristic temperatures for evaporation of physisorbed water and decomposition of Mg(OH)2 shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of the sintering temperature for all of the sintered specimens, indicating that the breaking point for ordering of the crystal structure was around 1500 °C for non-activated samples, and 1400 °C for activated samples.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics",
pages = "95-107",
volume = "140",
doi = "10.1007/s10973-019-08846-w",
url = "https://hdl.handle.net/21.15107/rcub_dais_10027"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Marković, S., Blagojević, V. A., Lević, S., Savić, S., Đorđević, A.,& Pavlović, V. B.. (2020). Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics. in Journal of Thermal Analysis and Calorimetry
Springer., 140, 95-107.
https://doi.org/10.1007/s10973-019-08846-w
https://hdl.handle.net/21.15107/rcub_dais_10027
Obradović N, Fahrenholtz WG, Filipović S, Marković S, Blagojević VA, Lević S, Savić S, Đorđević A, Pavlović VB. Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics. in Journal of Thermal Analysis and Calorimetry. 2020;140:95-107.
doi:10.1007/s10973-019-08846-w
https://hdl.handle.net/21.15107/rcub_dais_10027 .
Obradović, Nina, Fahrenholtz, William G., Filipović, Suzana, Marković, Smilja, Blagojević, Vladimir A., Lević, Steva, Savić, Slobodan, Đorđević, Antonije, Pavlović, Vladimir B., "Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics" in Journal of Thermal Analysis and Calorimetry, 140 (2020):95-107,
https://doi.org/10.1007/s10973-019-08846-w .,
https://hdl.handle.net/21.15107/rcub_dais_10027 .
1
2
2

Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis

Filipović, Suzana; Anđelković, Ljubica; Jeremić, Dejan; Vulić, Predrag; Nikolić, Aleksandar; Marković, Smilja; Paunović, Vesna; Lević, Steva; Pavlović, Vladimir B.

(Belgrade : ETRAN, 2020)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Anđelković, Ljubica
AU  - Jeremić, Dejan
AU  - Vulić, Predrag
AU  - Nikolić, Aleksandar
AU  - Marković, Smilja
AU  - Paunović, Vesna
AU  - Lević, Steva
AU  - Pavlović, Vladimir B.
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/9449
AB  - Barium titanate (BaTiO3) attracts high scientific and technological attention due to good dielectric and electromechanical properties. Although BaTiO3 is one of the most frequently investigated ferroelectric materials, the need for finding new and/or improved synthesis methods of this material still exists. In this paper, a novel, mild synthesis route for producing tetragonal BaTiO3 from barium nitrate and Ti-oxalate precursor is presented. Morphology of the prepared and subsequently sintered BaTiO3 was determined by SEM. Particle size distribution of the as prepared powder was monitored by the laser diffraction. The phase composition, structure and lattice dynamics were investigated by XRD and Raman spectroscopy. Finally, dielectric parameters were determined in the temperature range from 30 to 180 degrees C, and within a variety of frequencies. Curie temperature was detected at 130 degrees C.
PB  - Belgrade : ETRAN
T2  - Science of Sintering
T1  - Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis
SP  - 257
EP  - 268
VL  - 52
DO  - 10.2298/SOS2003257F
UR  - https://hdl.handle.net/21.15107/rcub_dais_9449
ER  - 
@article{
author = "Filipović, Suzana and Anđelković, Ljubica and Jeremić, Dejan and Vulić, Predrag and Nikolić, Aleksandar and Marković, Smilja and Paunović, Vesna and Lević, Steva and Pavlović, Vladimir B.",
year = "2020",
abstract = "Barium titanate (BaTiO3) attracts high scientific and technological attention due to good dielectric and electromechanical properties. Although BaTiO3 is one of the most frequently investigated ferroelectric materials, the need for finding new and/or improved synthesis methods of this material still exists. In this paper, a novel, mild synthesis route for producing tetragonal BaTiO3 from barium nitrate and Ti-oxalate precursor is presented. Morphology of the prepared and subsequently sintered BaTiO3 was determined by SEM. Particle size distribution of the as prepared powder was monitored by the laser diffraction. The phase composition, structure and lattice dynamics were investigated by XRD and Raman spectroscopy. Finally, dielectric parameters were determined in the temperature range from 30 to 180 degrees C, and within a variety of frequencies. Curie temperature was detected at 130 degrees C.",
publisher = "Belgrade : ETRAN",
journal = "Science of Sintering",
title = "Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis",
pages = "257-268",
volume = "52",
doi = "10.2298/SOS2003257F",
url = "https://hdl.handle.net/21.15107/rcub_dais_9449"
}
Filipović, S., Anđelković, L., Jeremić, D., Vulić, P., Nikolić, A., Marković, S., Paunović, V., Lević, S.,& Pavlović, V. B.. (2020). Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis. in Science of Sintering
Belgrade : ETRAN., 52, 257-268.
https://doi.org/10.2298/SOS2003257F
https://hdl.handle.net/21.15107/rcub_dais_9449
Filipović S, Anđelković L, Jeremić D, Vulić P, Nikolić A, Marković S, Paunović V, Lević S, Pavlović VB. Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis. in Science of Sintering. 2020;52:257-268.
doi:10.2298/SOS2003257F
https://hdl.handle.net/21.15107/rcub_dais_9449 .
Filipović, Suzana, Anđelković, Ljubica, Jeremić, Dejan, Vulić, Predrag, Nikolić, Aleksandar, Marković, Smilja, Paunović, Vesna, Lević, Steva, Pavlović, Vladimir B., "Structure and Properties of Nanocrystalline Tetragonal BaTiO3 Prepared by Combustion Solid State Synthesis" in Science of Sintering, 52 (2020):257-268,
https://doi.org/10.2298/SOS2003257F .,
https://hdl.handle.net/21.15107/rcub_dais_9449 .

Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Marković, Smilja; Blagojević, Vladimir A.; Lević, Steva; Savić, Slobodan; Đorđević, Antonije; Pavlović, Vladimir B.

(Springer, 2020)

TY  - JOUR
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Marković, Smilja
AU  - Blagojević, Vladimir A.
AU  - Lević, Steva
AU  - Savić, Slobodan
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2020
UR  - http://dais.sanu.ac.rs/123456789/6910
AB  - Solid-state mechanical activation of MgO and α-Al2O3 powders was used to produce MgAl2O4. The cation site occupancy in the resulting MgAl2O4 spinel was investigated using different methods. Differential thermal analysis and thermal gravimetry showed that mechanical activation reduced the spinel formation temperature by around 200 °C, and the corresponding activation energy by about 25%. In addition, characteristic temperatures for evaporation of physisorbed water and decomposition of Mg(OH)2 shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of the sintering temperature for all of the sintered specimens, indicating that the breaking point for ordering of the crystal structure was around 1500 °C for non-activated samples, and 1400 °C for activated samples.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics
SP  - 95
EP  - 107
VL  - 140
DO  - 10.1007/s10973-019-08846-w
UR  - https://hdl.handle.net/21.15107/rcub_dais_6910
ER  - 
@article{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Marković, Smilja and Blagojević, Vladimir A. and Lević, Steva and Savić, Slobodan and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2020",
abstract = "Solid-state mechanical activation of MgO and α-Al2O3 powders was used to produce MgAl2O4. The cation site occupancy in the resulting MgAl2O4 spinel was investigated using different methods. Differential thermal analysis and thermal gravimetry showed that mechanical activation reduced the spinel formation temperature by around 200 °C, and the corresponding activation energy by about 25%. In addition, characteristic temperatures for evaporation of physisorbed water and decomposition of Mg(OH)2 shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of the sintering temperature for all of the sintered specimens, indicating that the breaking point for ordering of the crystal structure was around 1500 °C for non-activated samples, and 1400 °C for activated samples.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics",
pages = "95-107",
volume = "140",
doi = "10.1007/s10973-019-08846-w",
url = "https://hdl.handle.net/21.15107/rcub_dais_6910"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Marković, S., Blagojević, V. A., Lević, S., Savić, S., Đorđević, A.,& Pavlović, V. B.. (2020). Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics. in Journal of Thermal Analysis and Calorimetry
Springer., 140, 95-107.
https://doi.org/10.1007/s10973-019-08846-w
https://hdl.handle.net/21.15107/rcub_dais_6910
Obradović N, Fahrenholtz WG, Filipović S, Marković S, Blagojević VA, Lević S, Savić S, Đorđević A, Pavlović VB. Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics. in Journal of Thermal Analysis and Calorimetry. 2020;140:95-107.
doi:10.1007/s10973-019-08846-w
https://hdl.handle.net/21.15107/rcub_dais_6910 .
Obradović, Nina, Fahrenholtz, William G., Filipović, Suzana, Marković, Smilja, Blagojević, Vladimir A., Lević, Steva, Savić, Slobodan, Đorđević, Antonije, Pavlović, Vladimir B., "Formation kinetics and cation inversion in mechanically activated MgAl2O4 spinel ceramics" in Journal of Thermal Analysis and Calorimetry, 140 (2020):95-107,
https://doi.org/10.1007/s10973-019-08846-w .,
https://hdl.handle.net/21.15107/rcub_dais_6910 .
1
2
2

Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal

Obradović, Nina; Rusmirović, Jelena; Filipović, Suzana; Kosanović, Darko; Marinković, Aleksandar; Radić, Danka; Pavlović, Vladimir B.

(Desalination Publications, 2020)

TY  - JOUR
AU  - Obradović, Nina
AU  - Rusmirović, Jelena
AU  - Filipović, Suzana
AU  - Kosanović, Darko
AU  - Marinković, Aleksandar
AU  - Radić, Danka
AU  - Pavlović, Vladimir B.
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10040
AB  - Industrial/technological growth is directly connected with environmental pollution, but its influence can be minimized through pollution abatement approaches such as the treatment of industrial wastewater. In this study, novel porous amine-functionalized silicate minerals, specifically, cordierite was investigated for the removal of toxic heavy metals from industrial wastewaters. Cordierite supports were synthesized by mixing MgO, Al2O3 , and SiO2 powders in 2:2:5 molar ratios, and mechanically activated via ball milling in ethanol for 10, 40, or 80 min. Pellets were sintered by heating in air at 20°C min-1 to 1,350°C, for 2 h. Porous supports were produced by coarsely crushing the sintered pellets and mixing the crushed and sieved cordierite powder with 20 wt.% of a pore-forming agent, either nanocellulose or yeast. The resulting pellets were sintered by heating at 5°C min-1 to 700°C in air. The synthetic cordierite support was modified by treatment in poly-ethylenimine. Activated supports were then tested for the removal of Ni2+ and Cd2+ ions. The phase composition of the cordierite supports was analyzed by the X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Analysis of adsorption isotherms, kinetics, and thermodynamic parameters indicated that adsorption was a spontaneous, endothermic process with a maximum adsorption capacity of 36 mg g-1 for Cd2+ and 43 mg g-1 for Ni2+. This work has shed light on the mechanism of heavy metal removal from the aquatic medium using the novel hybrid functionalized cordierite-based ceramic.
PB  - Desalination Publications
T2  - Desalination and Water Treatment
T1  - Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal
SP  - 283
EP  - 296
VL  - 192
DO  - 10.5004/dwt.2020.25736
UR  - https://hdl.handle.net/21.15107/rcub_dais_10040
ER  - 
@article{
author = "Obradović, Nina and Rusmirović, Jelena and Filipović, Suzana and Kosanović, Darko and Marinković, Aleksandar and Radić, Danka and Pavlović, Vladimir B.",
year = "2020",
abstract = "Industrial/technological growth is directly connected with environmental pollution, but its influence can be minimized through pollution abatement approaches such as the treatment of industrial wastewater. In this study, novel porous amine-functionalized silicate minerals, specifically, cordierite was investigated for the removal of toxic heavy metals from industrial wastewaters. Cordierite supports were synthesized by mixing MgO, Al2O3 , and SiO2 powders in 2:2:5 molar ratios, and mechanically activated via ball milling in ethanol for 10, 40, or 80 min. Pellets were sintered by heating in air at 20°C min-1 to 1,350°C, for 2 h. Porous supports were produced by coarsely crushing the sintered pellets and mixing the crushed and sieved cordierite powder with 20 wt.% of a pore-forming agent, either nanocellulose or yeast. The resulting pellets were sintered by heating at 5°C min-1 to 700°C in air. The synthetic cordierite support was modified by treatment in poly-ethylenimine. Activated supports were then tested for the removal of Ni2+ and Cd2+ ions. The phase composition of the cordierite supports was analyzed by the X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Analysis of adsorption isotherms, kinetics, and thermodynamic parameters indicated that adsorption was a spontaneous, endothermic process with a maximum adsorption capacity of 36 mg g-1 for Cd2+ and 43 mg g-1 for Ni2+. This work has shed light on the mechanism of heavy metal removal from the aquatic medium using the novel hybrid functionalized cordierite-based ceramic.",
publisher = "Desalination Publications",
journal = "Desalination and Water Treatment",
title = "Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal",
pages = "283-296",
volume = "192",
doi = "10.5004/dwt.2020.25736",
url = "https://hdl.handle.net/21.15107/rcub_dais_10040"
}
Obradović, N., Rusmirović, J., Filipović, S., Kosanović, D., Marinković, A., Radić, D.,& Pavlović, V. B.. (2020). Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal. in Desalination and Water Treatment
Desalination Publications., 192, 283-296.
https://doi.org/10.5004/dwt.2020.25736
https://hdl.handle.net/21.15107/rcub_dais_10040
Obradović N, Rusmirović J, Filipović S, Kosanović D, Marinković A, Radić D, Pavlović VB. Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal. in Desalination and Water Treatment. 2020;192:283-296.
doi:10.5004/dwt.2020.25736
https://hdl.handle.net/21.15107/rcub_dais_10040 .
Obradović, Nina, Rusmirović, Jelena, Filipović, Suzana, Kosanović, Darko, Marinković, Aleksandar, Radić, Danka, Pavlović, Vladimir B., "Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal" in Desalination and Water Treatment, 192 (2020):283-296,
https://doi.org/10.5004/dwt.2020.25736 .,
https://hdl.handle.net/21.15107/rcub_dais_10040 .

Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times

Miljković, Miljana; Kljajević, Ljiljana; Filipović, Suzana; Pavlović, Vladimir B.; Nenadović, Snežana S.

(Belgrade : ETRAN, 2020)

TY  - JOUR
AU  - Miljković, Miljana
AU  - Kljajević, Ljiljana
AU  - Filipović, Suzana
AU  - Pavlović, Vladimir B.
AU  - Nenadović, Snežana S.
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10041
AB  - The aim of the study was to investigate the influence of low heating temperatures with two different retention times to optimize the process for obtaining nanosized hydroxyapatite material that can possibly be used in the fields of biology and pharmacy. Nanosized hydroxyapatite was successfully obtained by wet chemical precipitation. The annealing of the material performed at 300 oC with two different retention times i.e. 3 and 6 hours in air atmosphere. Low annealing temperature with extended retention time was selected in terms to reduce energy consumption. FTIR spectroscopy was used to confirm characteristic vibrational bands of hydroxyapatite samples, and presence of carbonate bands of hydroxyapatite annealed for 3h and 6h. X-Ray powder diffraction analysis were used to examine phase composition, determine the size of unit cells and crystallite sizes, and SEMEDS methods were used to obtain particle size and arrangement also grain growth morphology and confirmed the presence of calcium, phosphorous oxygen and carbonate peaks. The results show that different retention time has influence on particle growth as well as unit cell parameters and crystallite sizes changes of hydroxyapatite material.
PB  - Belgrade : ETRAN
T2  - Science of Sintering
T1  - Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times
SP  - 405
EP  - 413
VL  - 52
IS  - 4
DO  - 10.2298/SOS2004405M
UR  - https://hdl.handle.net/21.15107/rcub_dais_10041
ER  - 
@article{
author = "Miljković, Miljana and Kljajević, Ljiljana and Filipović, Suzana and Pavlović, Vladimir B. and Nenadović, Snežana S.",
year = "2020",
abstract = "The aim of the study was to investigate the influence of low heating temperatures with two different retention times to optimize the process for obtaining nanosized hydroxyapatite material that can possibly be used in the fields of biology and pharmacy. Nanosized hydroxyapatite was successfully obtained by wet chemical precipitation. The annealing of the material performed at 300 oC with two different retention times i.e. 3 and 6 hours in air atmosphere. Low annealing temperature with extended retention time was selected in terms to reduce energy consumption. FTIR spectroscopy was used to confirm characteristic vibrational bands of hydroxyapatite samples, and presence of carbonate bands of hydroxyapatite annealed for 3h and 6h. X-Ray powder diffraction analysis were used to examine phase composition, determine the size of unit cells and crystallite sizes, and SEMEDS methods were used to obtain particle size and arrangement also grain growth morphology and confirmed the presence of calcium, phosphorous oxygen and carbonate peaks. The results show that different retention time has influence on particle growth as well as unit cell parameters and crystallite sizes changes of hydroxyapatite material.",
publisher = "Belgrade : ETRAN",
journal = "Science of Sintering",
title = "Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times",
pages = "405-413",
volume = "52",
number = "4",
doi = "10.2298/SOS2004405M",
url = "https://hdl.handle.net/21.15107/rcub_dais_10041"
}
Miljković, M., Kljajević, L., Filipović, S., Pavlović, V. B.,& Nenadović, S. S.. (2020). Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times. in Science of Sintering
Belgrade : ETRAN., 52(4), 405-413.
https://doi.org/10.2298/SOS2004405M
https://hdl.handle.net/21.15107/rcub_dais_10041
Miljković M, Kljajević L, Filipović S, Pavlović VB, Nenadović SS. Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times. in Science of Sintering. 2020;52(4):405-413.
doi:10.2298/SOS2004405M
https://hdl.handle.net/21.15107/rcub_dais_10041 .
Miljković, Miljana, Kljajević, Ljiljana, Filipović, Suzana, Pavlović, Vladimir B., Nenadović, Snežana S., "Study of Nanosized Hydroxyapatite Material Annealing at Different Retention Times" in Science of Sintering, 52, no. 4 (2020):405-413,
https://doi.org/10.2298/SOS2004405M .,
https://hdl.handle.net/21.15107/rcub_dais_10041 .
1
1

Kinetics of thermally activated processes in cordierite-based ceramics

Obradović, Nina; Blagojević, Vladimir A.; Filipović, Suzana; Đorđević, Antonije; Kosanović, Darko; Marković, Smilja; Kachlik, Martin; Maca, Karel; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Blagojević, Vladimir A.
AU  - Filipović, Suzana
AU  - Đorđević, Antonije
AU  - Kosanović, Darko
AU  - Marković, Smilja
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/7048
AB  - Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Kinetics of thermally activated processes in cordierite-based ceramics
SP  - 2989
EP  - 2998
VL  - 138
DO  - 10.1007/s10973-018-7924-1
UR  - https://hdl.handle.net/21.15107/rcub_dais_7048
ER  - 
@article{
author = "Obradović, Nina and Blagojević, Vladimir A. and Filipović, Suzana and Đorđević, Antonije and Kosanović, Darko and Marković, Smilja and Kachlik, Martin and Maca, Karel and Pavlović, Vladimir B.",
year = "2019",
abstract = "Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Kinetics of thermally activated processes in cordierite-based ceramics",
pages = "2989-2998",
volume = "138",
doi = "10.1007/s10973-018-7924-1",
url = "https://hdl.handle.net/21.15107/rcub_dais_7048"
}
Obradović, N., Blagojević, V. A., Filipović, S., Đorđević, A., Kosanović, D., Marković, S., Kachlik, M., Maca, K.,& Pavlović, V. B.. (2019). Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry
Springer., 138, 2989-2998.
https://doi.org/10.1007/s10973-018-7924-1
https://hdl.handle.net/21.15107/rcub_dais_7048
Obradović N, Blagojević VA, Filipović S, Đorđević A, Kosanović D, Marković S, Kachlik M, Maca K, Pavlović VB. Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry. 2019;138:2989-2998.
doi:10.1007/s10973-018-7924-1
https://hdl.handle.net/21.15107/rcub_dais_7048 .
Obradović, Nina, Blagojević, Vladimir A., Filipović, Suzana, Đorđević, Antonije, Kosanović, Darko, Marković, Smilja, Kachlik, Martin, Maca, Karel, Pavlović, Vladimir B., "Kinetics of thermally activated processes in cordierite-based ceramics" in Journal of Thermal Analysis and Calorimetry, 138 (2019):2989-2998,
https://doi.org/10.1007/s10973-018-7924-1 .,
https://hdl.handle.net/21.15107/rcub_dais_7048 .
2
1
1

Kinetics of thermally activated processes in cordierite-based ceramics

Obradović, Nina; Blagojević, Vladimir A.; Filipović, Suzana; Đorđević, Antonije; Kosanović, Darko; Marković, Smilja; Kachlik, Martin; Maca, Karel; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Blagojević, Vladimir A.
AU  - Filipović, Suzana
AU  - Đorđević, Antonije
AU  - Kosanović, Darko
AU  - Marković, Smilja
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/4558
AB  - Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Kinetics of thermally activated processes in cordierite-based ceramics
SP  - 2989
EP  - 2998
VL  - 138
DO  - 10.1007/s10973-018-7924-1
UR  - https://hdl.handle.net/21.15107/rcub_dais_4558
ER  - 
@article{
author = "Obradović, Nina and Blagojević, Vladimir A. and Filipović, Suzana and Đorđević, Antonije and Kosanović, Darko and Marković, Smilja and Kachlik, Martin and Maca, Karel and Pavlović, Vladimir B.",
year = "2019",
abstract = "Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Kinetics of thermally activated processes in cordierite-based ceramics",
pages = "2989-2998",
volume = "138",
doi = "10.1007/s10973-018-7924-1",
url = "https://hdl.handle.net/21.15107/rcub_dais_4558"
}
Obradović, N., Blagojević, V. A., Filipović, S., Đorđević, A., Kosanović, D., Marković, S., Kachlik, M., Maca, K.,& Pavlović, V. B.. (2019). Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry
Springer., 138, 2989-2998.
https://doi.org/10.1007/s10973-018-7924-1
https://hdl.handle.net/21.15107/rcub_dais_4558
Obradović N, Blagojević VA, Filipović S, Đorđević A, Kosanović D, Marković S, Kachlik M, Maca K, Pavlović VB. Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry. 2019;138:2989-2998.
doi:10.1007/s10973-018-7924-1
https://hdl.handle.net/21.15107/rcub_dais_4558 .
Obradović, Nina, Blagojević, Vladimir A., Filipović, Suzana, Đorđević, Antonije, Kosanović, Darko, Marković, Smilja, Kachlik, Martin, Maca, Karel, Pavlović, Vladimir B., "Kinetics of thermally activated processes in cordierite-based ceramics" in Journal of Thermal Analysis and Calorimetry, 138 (2019):2989-2998,
https://doi.org/10.1007/s10973-018-7924-1 .,
https://hdl.handle.net/21.15107/rcub_dais_4558 .
2
1
1

Morphological and structural characterization of spinel MgAl2O4

Filipović, Suzana; Obradović, Nina; Fahrenholtz, William G.; Marinković, Bojan A.; Rogan, Jelena; Lević, Steva; Pavlović, Vladimir B.

(Belgrade : Serbian Ceramic Society, 2019)

TY  - CONF
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Marinković, Bojan A.
AU  - Rogan, Jelena
AU  - Lević, Steva
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6779
AB  - Magnesium aluminate has spinel structure and very good mechanical, chemical, and thermal properties. Owing to these properties, it has a wide range of applications including refractory ceramics, optically transparent ceramic windows and armors. Its low dielectric permeability and low loss tangent enable its using for integrated electronic devices, as well. Furthermore, as a porous ceramic, magnesium aluminate has important application as humidity sensor, catalyst and filter for waste water purification. In this paper, synthesis and characterization of MgAl2O4 was performed. Stochiometric ratio of MgO and Al2O3powders was mixed and calcined within the temperatures range 1500-1800 oC to produce pure spinel phase. Thereafter pellets were crushed and treated in planetary ball mill for 60 minutes to obtained fine grain. All powders, calcined and milled, were examined for phase composition, crystal structure, and morphology. The obtained results showed that by increasing the temperature denser samples but more fragile have been synthesized. Milling for 1 hour leads to crumble of bigger particles and getting finer, single phase powders. XRPD and Raman spectroscopy showed disorder in crystal structure after milling.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019
T1  - Morphological and structural characterization of spinel MgAl2O4
SP  - 32
EP  - 32
UR  - https://hdl.handle.net/21.15107/rcub_dais_6779
ER  - 
@conference{
author = "Filipović, Suzana and Obradović, Nina and Fahrenholtz, William G. and Marinković, Bojan A. and Rogan, Jelena and Lević, Steva and Pavlović, Vladimir B.",
year = "2019",
abstract = "Magnesium aluminate has spinel structure and very good mechanical, chemical, and thermal properties. Owing to these properties, it has a wide range of applications including refractory ceramics, optically transparent ceramic windows and armors. Its low dielectric permeability and low loss tangent enable its using for integrated electronic devices, as well. Furthermore, as a porous ceramic, magnesium aluminate has important application as humidity sensor, catalyst and filter for waste water purification. In this paper, synthesis and characterization of MgAl2O4 was performed. Stochiometric ratio of MgO and Al2O3powders was mixed and calcined within the temperatures range 1500-1800 oC to produce pure spinel phase. Thereafter pellets were crushed and treated in planetary ball mill for 60 minutes to obtained fine grain. All powders, calcined and milled, were examined for phase composition, crystal structure, and morphology. The obtained results showed that by increasing the temperature denser samples but more fragile have been synthesized. Milling for 1 hour leads to crumble of bigger particles and getting finer, single phase powders. XRPD and Raman spectroscopy showed disorder in crystal structure after milling.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019",
title = "Morphological and structural characterization of spinel MgAl2O4",
pages = "32-32",
url = "https://hdl.handle.net/21.15107/rcub_dais_6779"
}
Filipović, S., Obradović, N., Fahrenholtz, W. G., Marinković, B. A., Rogan, J., Lević, S.,& Pavlović, V. B.. (2019). Morphological and structural characterization of spinel MgAl2O4. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019
Belgrade : Serbian Ceramic Society., 32-32.
https://hdl.handle.net/21.15107/rcub_dais_6779
Filipović S, Obradović N, Fahrenholtz WG, Marinković BA, Rogan J, Lević S, Pavlović VB. Morphological and structural characterization of spinel MgAl2O4. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019. 2019;:32-32.
https://hdl.handle.net/21.15107/rcub_dais_6779 .
Filipović, Suzana, Obradović, Nina, Fahrenholtz, William G., Marinković, Bojan A., Rogan, Jelena, Lević, Steva, Pavlović, Vladimir B., "Morphological and structural characterization of spinel MgAl2O4" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019 (2019):32-32,
https://hdl.handle.net/21.15107/rcub_dais_6779 .

Influence of mechanical activation on kinetics and formation of spinel monitored by DTA

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Marković, Smilja; Blagojević, Vladimir A.; Lević, Steva; Đorđević, Antonije; Pavlović, Vladimir B.

(Central and Eastern European Committee for Thermal Analysis and Calorimetry, 2019)

TY  - CONF
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Marković, Smilja
AU  - Blagojević, Vladimir A.
AU  - Lević, Steva
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/7020
AB  - Magnesium aluminate and other alumina-based spinels are refractory ceramics with excellent properties, such as high hardness, high mechanical strength, and low dielectric constant, applicable in many modern industries. MgAl2O4 was produced by solid state reaction between MgO and alpha-Al2O3 powders. Mechanical activation represents a very efficient method for increasing the reactivity of powders, accelerating chemical reactions and decreasing the sintering temperatures. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 60 minutes. Sintering was performed in air at temperatures ranging from 1200°C to 1600 °C with a 2 h dwell time. Initial powders and sintered samples were characterized using X-ray diffraction and scanning electron microscopy. Differential thermal analysis (DTA) and thermal gravimetry (TG) were used to determine the temperatures for synthesis reactions and phase transformations. Based on the DTA results, several different processes occured during heating, including evaporation of physisorbed water, decomposition of Mg(OH)2, and spinel formation. With mechanical activation, all characteristic temperatures shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of sintering temperature for all of the sintered specimens.
PB  - Central and Eastern European Committee for Thermal Analysis and Calorimetry
C3  - Book of abstracts of the 5th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC5) and 14th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2019)
T1  - Influence of mechanical activation on kinetics and formation of spinel monitored by DTA
SP  - 70
EP  - 70
UR  - https://hdl.handle.net/21.15107/rcub_dais_7020
ER  - 
@conference{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Marković, Smilja and Blagojević, Vladimir A. and Lević, Steva and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2019",
abstract = "Magnesium aluminate and other alumina-based spinels are refractory ceramics with excellent properties, such as high hardness, high mechanical strength, and low dielectric constant, applicable in many modern industries. MgAl2O4 was produced by solid state reaction between MgO and alpha-Al2O3 powders. Mechanical activation represents a very efficient method for increasing the reactivity of powders, accelerating chemical reactions and decreasing the sintering temperatures. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 60 minutes. Sintering was performed in air at temperatures ranging from 1200°C to 1600 °C with a 2 h dwell time. Initial powders and sintered samples were characterized using X-ray diffraction and scanning electron microscopy. Differential thermal analysis (DTA) and thermal gravimetry (TG) were used to determine the temperatures for synthesis reactions and phase transformations. Based on the DTA results, several different processes occured during heating, including evaporation of physisorbed water, decomposition of Mg(OH)2, and spinel formation. With mechanical activation, all characteristic temperatures shifted to lower values, and peaks were more pronounced. Raman spectra were used to characterize the degree of inversion as a function of sintering temperature for all of the sintered specimens.",
publisher = "Central and Eastern European Committee for Thermal Analysis and Calorimetry",
journal = "Book of abstracts of the 5th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC5) and 14th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2019)",
title = "Influence of mechanical activation on kinetics and formation of spinel monitored by DTA",
pages = "70-70",
url = "https://hdl.handle.net/21.15107/rcub_dais_7020"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Marković, S., Blagojević, V. A., Lević, S., Đorđević, A.,& Pavlović, V. B.. (2019). Influence of mechanical activation on kinetics and formation of spinel monitored by DTA. in Book of abstracts of the 5th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC5) and 14th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2019)
Central and Eastern European Committee for Thermal Analysis and Calorimetry., 70-70.
https://hdl.handle.net/21.15107/rcub_dais_7020
Obradović N, Fahrenholtz WG, Filipović S, Marković S, Blagojević VA, Lević S, Đorđević A, Pavlović VB. Influence of mechanical activation on kinetics and formation of spinel monitored by DTA. in Book of abstracts of the 5th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC5) and 14th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2019). 2019;:70-70.
https://hdl.handle.net/21.15107/rcub_dais_7020 .
Obradović, Nina, Fahrenholtz, William G., Filipović, Suzana, Marković, Smilja, Blagojević, Vladimir A., Lević, Steva, Đorđević, Antonije, Pavlović, Vladimir B., "Influence of mechanical activation on kinetics and formation of spinel monitored by DTA" in Book of abstracts of the 5th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC5) and 14th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2019) (2019):70-70,
https://hdl.handle.net/21.15107/rcub_dais_7020 .

Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure

Filipović, Suzana; Pavlović, Vera P.; Mitrić, Miodrag; Lević, Steva; Mitrović, Nebojša; Maričić, Aleksa; Vlahović, Branislav; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Lević, Steva
AU  - Mitrović, Nebojša
AU  - Maričić, Aleksa
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://doi.org/10.1007/s40145-018-0301-5
UR  - http://dais.sanu.ac.rs/123456789/5271
AB  - Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.
PB  - Springer
T2  - Journal of Advanced Ceramics
T1  - Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure
SP  - 133
EP  - 147
VL  - 8
IS  - 1
DO  - 10.1007/s40145-018-0301-5
UR  - https://hdl.handle.net/21.15107/rcub_dais_5271
ER  - 
@article{
author = "Filipović, Suzana and Pavlović, Vera P. and Mitrić, Miodrag and Lević, Steva and Mitrović, Nebojša and Maričić, Aleksa and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.",
publisher = "Springer",
journal = "Journal of Advanced Ceramics",
title = "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure",
pages = "133-147",
volume = "8",
number = "1",
doi = "10.1007/s40145-018-0301-5",
url = "https://hdl.handle.net/21.15107/rcub_dais_5271"
}
Filipović, S., Pavlović, V. P., Mitrić, M., Lević, S., Mitrović, N., Maričić, A., Vlahović, B.,& Pavlović, V. B.. (2019). Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. in Journal of Advanced Ceramics
Springer., 8(1), 133-147.
https://doi.org/10.1007/s40145-018-0301-5
https://hdl.handle.net/21.15107/rcub_dais_5271
Filipović S, Pavlović VP, Mitrić M, Lević S, Mitrović N, Maričić A, Vlahović B, Pavlović VB. Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. in Journal of Advanced Ceramics. 2019;8(1):133-147.
doi:10.1007/s40145-018-0301-5
https://hdl.handle.net/21.15107/rcub_dais_5271 .
Filipović, Suzana, Pavlović, Vera P., Mitrić, Miodrag, Lević, Steva, Mitrović, Nebojša, Maričić, Aleksa, Vlahović, Branislav, Pavlović, Vladimir B., "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure" in Journal of Advanced Ceramics, 8, no. 1 (2019):133-147,
https://doi.org/10.1007/s40145-018-0301-5 .,
https://hdl.handle.net/21.15107/rcub_dais_5271 .
1
5
7
6

The effect of ball milling on properties of sintered manganese-doped alumina

Filipović, Suzana; Obradović, Nina; Marković, Smilja; Mitrić, Miodrag; Balać, Igor; Đorđević, Antonije; Pavlović, Vladimir B.

(Elsevier, 2019)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Marković, Smilja
AU  - Mitrić, Miodrag
AU  - Balać, Igor
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0921883119302596
UR  - http://dais.sanu.ac.rs/123456789/6951
AB  - Alumina-based compounds have many technological applications and attract great attention even after decades of investigation, due to their good chemical, electrical, and mechanical properties. A mixture of several alumina modifications (α-, κ-, γ-Al2O3) doped with 1 wt% of Mn2O3 was used for this experiment. The powder was mechanically activated for 60 min in an ethanol medium. After compaction, green bodies were sintered in the temperature range from 1200 to 1400 °C. Microstructures of the obtained specimens were investigated by scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS). The influence of morphological changes on electrical and mechanical properties was examined in detail. We have developed a test fixture and corresponding software for measurement of the relative dielectric permittivity and the loss tangent of ceramic specimens. This new method overcomes the problems of dimensions and shape of samples, as well as the problem of applying silver paste. The accuracy is around 2% for ε'r and 0.003 for tanδ. We demonstrate that the mechanical activation (MA) has the dominant influence on lowering the characteristic temperatures and microstructure development, which further leads to increased permittivity and tensile strength.
PB  - Elsevier
T2  - Advanced Powder Technology
T1  - The effect of ball milling on properties of sintered manganese-doped alumina
SP  - 2533
EP  - 2540
VL  - 30
IS  - 11
DO  - 10.1016/j.apt.2019.07.033
UR  - https://hdl.handle.net/21.15107/rcub_dais_6951
ER  - 
@article{
author = "Filipović, Suzana and Obradović, Nina and Marković, Smilja and Mitrić, Miodrag and Balać, Igor and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2019",
abstract = "Alumina-based compounds have many technological applications and attract great attention even after decades of investigation, due to their good chemical, electrical, and mechanical properties. A mixture of several alumina modifications (α-, κ-, γ-Al2O3) doped with 1 wt% of Mn2O3 was used for this experiment. The powder was mechanically activated for 60 min in an ethanol medium. After compaction, green bodies were sintered in the temperature range from 1200 to 1400 °C. Microstructures of the obtained specimens were investigated by scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS). The influence of morphological changes on electrical and mechanical properties was examined in detail. We have developed a test fixture and corresponding software for measurement of the relative dielectric permittivity and the loss tangent of ceramic specimens. This new method overcomes the problems of dimensions and shape of samples, as well as the problem of applying silver paste. The accuracy is around 2% for ε'r and 0.003 for tanδ. We demonstrate that the mechanical activation (MA) has the dominant influence on lowering the characteristic temperatures and microstructure development, which further leads to increased permittivity and tensile strength.",
publisher = "Elsevier",
journal = "Advanced Powder Technology",
title = "The effect of ball milling on properties of sintered manganese-doped alumina",
pages = "2533-2540",
volume = "30",
number = "11",
doi = "10.1016/j.apt.2019.07.033",
url = "https://hdl.handle.net/21.15107/rcub_dais_6951"
}
Filipović, S., Obradović, N., Marković, S., Mitrić, M., Balać, I., Đorđević, A.,& Pavlović, V. B.. (2019). The effect of ball milling on properties of sintered manganese-doped alumina. in Advanced Powder Technology
Elsevier., 30(11), 2533-2540.
https://doi.org/10.1016/j.apt.2019.07.033
https://hdl.handle.net/21.15107/rcub_dais_6951
Filipović S, Obradović N, Marković S, Mitrić M, Balać I, Đorđević A, Pavlović VB. The effect of ball milling on properties of sintered manganese-doped alumina. in Advanced Powder Technology. 2019;30(11):2533-2540.
doi:10.1016/j.apt.2019.07.033
https://hdl.handle.net/21.15107/rcub_dais_6951 .
Filipović, Suzana, Obradović, Nina, Marković, Smilja, Mitrić, Miodrag, Balać, Igor, Đorđević, Antonije, Pavlović, Vladimir B., "The effect of ball milling on properties of sintered manganese-doped alumina" in Advanced Powder Technology, 30, no. 11 (2019):2533-2540,
https://doi.org/10.1016/j.apt.2019.07.033 .,
https://hdl.handle.net/21.15107/rcub_dais_6951 .
1
3
3

The effect of ball milling on properties of sintered manganese-doped alumina

Filipović, Suzana; Obradović, Nina; Marković, Smilja; Mitrić, Miodrag; Balać, Igor; Đorđević, Antonije; Pavlović, Vladimir B.

(Elsevier, 2019)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Marković, Smilja
AU  - Mitrić, Miodrag
AU  - Balać, Igor
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0921883119302596
UR  - http://dais.sanu.ac.rs/123456789/7027
AB  - Alumina-based compounds have many technological applications and attract great attention even after decades of investigation, due to their good chemical, electrical, and mechanical properties. A mixture of several alumina modifications (α-, κ-, γ-Al2O3) doped with 1 wt% of Mn2O3 was used for this experiment. The powder was mechanically activated for 60 min in an ethanol medium. After compaction, green bodies were sintered in the temperature range from 1200 to 1400 °C. Microstructures of the obtained specimens were investigated by scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS). The influence of morphological changes on electrical and mechanical properties was examined in detail. We have developed a test fixture and corresponding software for measurement of the relative dielectric permittivity and the loss tangent of ceramic specimens. This new method overcomes the problems of dimensions and shape of samples, as well as the problem of applying silver paste. The accuracy is around 2% for ε'r and 0.003 for tanδ. We demonstrate that the mechanical activation (MA) has the dominant influence on lowering the characteristic temperatures and microstructure development, which further leads to increased permittivity and tensile strength.
PB  - Elsevier
T2  - Advanced Powder Technology
T1  - The effect of ball milling on properties of sintered manganese-doped alumina
SP  - 2533
EP  - 2540
VL  - 30
IS  - 11
DO  - 10.1016/j.apt.2019.07.033
UR  - https://hdl.handle.net/21.15107/rcub_dais_7027
ER  - 
@article{
author = "Filipović, Suzana and Obradović, Nina and Marković, Smilja and Mitrić, Miodrag and Balać, Igor and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2019",
abstract = "Alumina-based compounds have many technological applications and attract great attention even after decades of investigation, due to their good chemical, electrical, and mechanical properties. A mixture of several alumina modifications (α-, κ-, γ-Al2O3) doped with 1 wt% of Mn2O3 was used for this experiment. The powder was mechanically activated for 60 min in an ethanol medium. After compaction, green bodies were sintered in the temperature range from 1200 to 1400 °C. Microstructures of the obtained specimens were investigated by scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS). The influence of morphological changes on electrical and mechanical properties was examined in detail. We have developed a test fixture and corresponding software for measurement of the relative dielectric permittivity and the loss tangent of ceramic specimens. This new method overcomes the problems of dimensions and shape of samples, as well as the problem of applying silver paste. The accuracy is around 2% for ε'r and 0.003 for tanδ. We demonstrate that the mechanical activation (MA) has the dominant influence on lowering the characteristic temperatures and microstructure development, which further leads to increased permittivity and tensile strength.",
publisher = "Elsevier",
journal = "Advanced Powder Technology",
title = "The effect of ball milling on properties of sintered manganese-doped alumina",
pages = "2533-2540",
volume = "30",
number = "11",
doi = "10.1016/j.apt.2019.07.033",
url = "https://hdl.handle.net/21.15107/rcub_dais_7027"
}
Filipović, S., Obradović, N., Marković, S., Mitrić, M., Balać, I., Đorđević, A.,& Pavlović, V. B.. (2019). The effect of ball milling on properties of sintered manganese-doped alumina. in Advanced Powder Technology
Elsevier., 30(11), 2533-2540.
https://doi.org/10.1016/j.apt.2019.07.033
https://hdl.handle.net/21.15107/rcub_dais_7027
Filipović S, Obradović N, Marković S, Mitrić M, Balać I, Đorđević A, Pavlović VB. The effect of ball milling on properties of sintered manganese-doped alumina. in Advanced Powder Technology. 2019;30(11):2533-2540.
doi:10.1016/j.apt.2019.07.033
https://hdl.handle.net/21.15107/rcub_dais_7027 .
Filipović, Suzana, Obradović, Nina, Marković, Smilja, Mitrić, Miodrag, Balać, Igor, Đorđević, Antonije, Pavlović, Vladimir B., "The effect of ball milling on properties of sintered manganese-doped alumina" in Advanced Powder Technology, 30, no. 11 (2019):2533-2540,
https://doi.org/10.1016/j.apt.2019.07.033 .,
https://hdl.handle.net/21.15107/rcub_dais_7027 .
1
3
3

Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Đorđević, Pavle; Rogan, Jelena; Pavlović, Vladimir B.

(The Ceramic Society of Japan, 2019)

TY  - CONF
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Đorđević, Pavle
AU  - Rogan, Jelena
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/7050
AB  - Magnesium aluminate and other alumina-based spinels attract attention due to their high hardness, high mechanical strength, and low dielectric constant. MgAl2O4 was produced by solid-state reaction between MgO and a-Al2O3 powders. Mechanical activation was used to increase the reactivity of powders and decrease the sintering temperatures. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 30, 60, 90, and 120 minutes. The resulting powders were characterized to determine the effect of activation on surface area, particle size, and crystallinity. Mechanical activation decreased particle size, increased surface area, and increased the width of peaks in x-ray diffraction. Dilatometry was used to monitor densification behavior up to 1500 °C. For non-activated powders, sintering started at approximately 1400 °C, while for activated powders, the onset temperature decreased to about 1340 °C. Mechanical activation is an efficient method to improve the densification behaviour of MgAl2O4 produced from mixed oxide powders.
PB  - The Ceramic Society of Japan
C3  - The 13th Pacific Rim Conference of Ceramic Societies (PACRIM13), October 27 - November 1, 2019, Okinawa Convention Center, Japan
T1  - Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel
SP  - 30-B1C-S13-14
UR  - https://hdl.handle.net/21.15107/rcub_dais_7050
ER  - 
@conference{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Đorđević, Pavle and Rogan, Jelena and Pavlović, Vladimir B.",
year = "2019",
abstract = "Magnesium aluminate and other alumina-based spinels attract attention due to their high hardness, high mechanical strength, and low dielectric constant. MgAl2O4 was produced by solid-state reaction between MgO and a-Al2O3 powders. Mechanical activation was used to increase the reactivity of powders and decrease the sintering temperatures. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 30, 60, 90, and 120 minutes. The resulting powders were characterized to determine the effect of activation on surface area, particle size, and crystallinity. Mechanical activation decreased particle size, increased surface area, and increased the width of peaks in x-ray diffraction. Dilatometry was used to monitor densification behavior up to 1500 °C. For non-activated powders, sintering started at approximately 1400 °C, while for activated powders, the onset temperature decreased to about 1340 °C. Mechanical activation is an efficient method to improve the densification behaviour of MgAl2O4 produced from mixed oxide powders.",
publisher = "The Ceramic Society of Japan",
journal = "The 13th Pacific Rim Conference of Ceramic Societies (PACRIM13), October 27 - November 1, 2019, Okinawa Convention Center, Japan",
title = "Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel",
pages = "30-B1C-S13-14",
url = "https://hdl.handle.net/21.15107/rcub_dais_7050"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Đorđević, P., Rogan, J.,& Pavlović, V. B.. (2019). Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel. in The 13th Pacific Rim Conference of Ceramic Societies (PACRIM13), October 27 - November 1, 2019, Okinawa Convention Center, Japan
The Ceramic Society of Japan., 30-B1C-S13-14.
https://hdl.handle.net/21.15107/rcub_dais_7050
Obradović N, Fahrenholtz WG, Filipović S, Đorđević P, Rogan J, Pavlović VB. Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel. in The 13th Pacific Rim Conference of Ceramic Societies (PACRIM13), October 27 - November 1, 2019, Okinawa Convention Center, Japan. 2019;:30-B1C-S13-14.
https://hdl.handle.net/21.15107/rcub_dais_7050 .
Obradović, Nina, Fahrenholtz, William G., Filipović, Suzana, Đorđević, Pavle, Rogan, Jelena, Pavlović, Vladimir B., "Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel" in The 13th Pacific Rim Conference of Ceramic Societies (PACRIM13), October 27 - November 1, 2019, Okinawa Convention Center, Japan (2019):30-B1C-S13-14,
https://hdl.handle.net/21.15107/rcub_dais_7050 .

The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Kosanović, Darko; Dapčević, Aleksandra; Rogan, Jelena; Pavlović, Vladimir B.

(Societa ceramica italiana, 2019)

TY  - CONF
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Kosanović, Darko
AU  - Dapčević, Aleksandra
AU  - Rogan, Jelena
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/7022
AB  - Magnesium aluminate, MgAl2O4, and other alumina-based spinels are refractory ceramics with high hardness and resistance to chemical attack while also being possible microwave dielectrics. Pure MgAl2O4 can be optically transparent when fully dense. Spinels exhibit inversion, which results in disorder among occupancy of A and B site cations. The goal of this study was to examine the effects of mechanical activation and composition on the temperature required for spinel formation and the site occupancy in the resulting spinel. 
MgAl2O4 was produced by solid state reaction between MgO and alpha-Al2O3. The starting powders were mixed by ball milling to homogenize the powders without significant particle size reduction. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 1 h. Powders were compacted at 300 MPa. Heat treatments were performed in air, at temperatures ranging from 1200 to 1500 °C with 2 h dwell time, to determine the amount of spinel formation as a function of temperature. Phase composition and microstructure of initial powders and heated samples were determined by means of X-ray diffraction, particle size analysis, and scanning electron microscopy. The influence of milling and consolidation parameters were studied by electrical measurements and mechanical characterization. 
The main results of this study were that mechanical activation for 60 minutes initiated a mechano-chemical reaction, and resulted in spinel formation at much lower temperatures than within non-activated powders. Microstructures of ceramics sintered below 1400 oC indicated that final stage sintering started at much lower temperatures for activated samples than for non-activated samples. 
Changes in microstructure parameters, as a consequence of mechanical treatment and subsequent heating of investigated powder mixtures, strongly affect electrical and mechanical properties of the final ceramics.
PB  - Societa ceramica italiana
PB  - Politecnico di Torino
C3  - Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019
T1  - The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics
SP  - 262
EP  - 262
UR  - https://hdl.handle.net/21.15107/rcub_dais_7022
ER  - 
@conference{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Kosanović, Darko and Dapčević, Aleksandra and Rogan, Jelena and Pavlović, Vladimir B.",
year = "2019",
abstract = "Magnesium aluminate, MgAl2O4, and other alumina-based spinels are refractory ceramics with high hardness and resistance to chemical attack while also being possible microwave dielectrics. Pure MgAl2O4 can be optically transparent when fully dense. Spinels exhibit inversion, which results in disorder among occupancy of A and B site cations. The goal of this study was to examine the effects of mechanical activation and composition on the temperature required for spinel formation and the site occupancy in the resulting spinel. 
MgAl2O4 was produced by solid state reaction between MgO and alpha-Al2O3. The starting powders were mixed by ball milling to homogenize the powders without significant particle size reduction. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 1 h. Powders were compacted at 300 MPa. Heat treatments were performed in air, at temperatures ranging from 1200 to 1500 °C with 2 h dwell time, to determine the amount of spinel formation as a function of temperature. Phase composition and microstructure of initial powders and heated samples were determined by means of X-ray diffraction, particle size analysis, and scanning electron microscopy. The influence of milling and consolidation parameters were studied by electrical measurements and mechanical characterization. 
The main results of this study were that mechanical activation for 60 minutes initiated a mechano-chemical reaction, and resulted in spinel formation at much lower temperatures than within non-activated powders. Microstructures of ceramics sintered below 1400 oC indicated that final stage sintering started at much lower temperatures for activated samples than for non-activated samples. 
Changes in microstructure parameters, as a consequence of mechanical treatment and subsequent heating of investigated powder mixtures, strongly affect electrical and mechanical properties of the final ceramics.",
publisher = "Societa ceramica italiana, Politecnico di Torino",
journal = "Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019",
title = "The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics",
pages = "262-262",
url = "https://hdl.handle.net/21.15107/rcub_dais_7022"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Kosanović, D., Dapčević, A., Rogan, J.,& Pavlović, V. B.. (2019). The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics. in Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019
Societa ceramica italiana., 262-262.
https://hdl.handle.net/21.15107/rcub_dais_7022
Obradović N, Fahrenholtz WG, Filipović S, Kosanović D, Dapčević A, Rogan J, Pavlović VB. The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics. in Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019. 2019;:262-262.
https://hdl.handle.net/21.15107/rcub_dais_7022 .
Obradović, Nina, Fahrenholtz, William G., Filipović, Suzana, Kosanović, Darko, Dapčević, Aleksandra, Rogan, Jelena, Pavlović, Vladimir B., "The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics" in Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019 (2019):262-262,
https://hdl.handle.net/21.15107/rcub_dais_7022 .

Characterization of MgAl2O4 sintered ceramics

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Đorđević, Pavle; Marković, Smilja; Rogan, Jelena; Vulić, Predrag J.; Pavlović, Vladimir B.

(Belgrade : Serbian Ceramic Society, 2019)

TY  - CONF
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Đorđević, Pavle
AU  - Marković, Smilja
AU  - Rogan, Jelena
AU  - Vulić, Predrag J.
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6980
AB  - Single crystalline phase MgAl2O4 is made from the predetermined composition of MgO-Al2O3 powder mixture by using ball-milling. Mixtures of MgO and Al2O3 are treated in planetary ball mill for 30, 60, 90 and 120 minutes, in air. The aim of this experiment was to examine phase composition, microstructure, and densification behavior of all sintered samples and to find out which sample has the best features for further use. After sintering in dilatometer at 1500 °C, XRD patterns and SEM images were recorded. The results show that mechanical activation is an efficient method to improve the densification behavior of MgAl2O4 sintered specimens. With the prolonged milling time, densities increased, reaching the maximum value of 2.8 g/cm3 for sample activated 120 minutes.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019
T1  - Characterization of MgAl2O4 sintered ceramics
SP  - 54
EP  - 54
UR  - https://hdl.handle.net/21.15107/rcub_dais_6980
ER  - 
@conference{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Đorđević, Pavle and Marković, Smilja and Rogan, Jelena and Vulić, Predrag J. and Pavlović, Vladimir B.",
year = "2019",
abstract = "Single crystalline phase MgAl2O4 is made from the predetermined composition of MgO-Al2O3 powder mixture by using ball-milling. Mixtures of MgO and Al2O3 are treated in planetary ball mill for 30, 60, 90 and 120 minutes, in air. The aim of this experiment was to examine phase composition, microstructure, and densification behavior of all sintered samples and to find out which sample has the best features for further use. After sintering in dilatometer at 1500 °C, XRD patterns and SEM images were recorded. The results show that mechanical activation is an efficient method to improve the densification behavior of MgAl2O4 sintered specimens. With the prolonged milling time, densities increased, reaching the maximum value of 2.8 g/cm3 for sample activated 120 minutes.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019",
title = "Characterization of MgAl2O4 sintered ceramics",
pages = "54-54",
url = "https://hdl.handle.net/21.15107/rcub_dais_6980"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Đorđević, P., Marković, S., Rogan, J., Vulić, P. J.,& Pavlović, V. B.. (2019). Characterization of MgAl2O4 sintered ceramics. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019
Belgrade : Serbian Ceramic Society., 54-54.
https://hdl.handle.net/21.15107/rcub_dais_6980
Obradović N, Fahrenholtz WG, Filipović S, Đorđević P, Marković S, Rogan J, Vulić PJ, Pavlović VB. Characterization of MgAl2O4 sintered ceramics. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019. 2019;:54-54.
https://hdl.handle.net/21.15107/rcub_dais_6980 .
Obradović, Nina, Fahrenholtz, William G., Filipović, Suzana, Đorđević, Pavle, Marković, Smilja, Rogan, Jelena, Vulić, Predrag J., Pavlović, Vladimir B., "Characterization of MgAl2O4 sintered ceramics" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019 (2019):54-54,
https://hdl.handle.net/21.15107/rcub_dais_6980 .

Characterization of MgAl2O4 sintered ceramics

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Corlett, Cole; Đorđević, Pavle; Rogan, Jelena; Vulić, Predrag J.; Buljak, Vladimir; Pavlović, Vladimir B.

(ETRAN, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Corlett, Cole
AU  - Đorđević, Pavle
AU  - Rogan, Jelena
AU  - Vulić, Predrag J.
AU  - Buljak, Vladimir
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6949
AB  - Single phase MgAl2O4 was made from a one-to-one molar ratio of MgO and Al2O3 powders mixed using ball-milling. Mixtures of MgO and Al2O3 were subsequently treated in planetary ball mill for 30, 60, 90 and 120 minutes in air. The aim of this study was to examine phase composition, microstructure, and densification behavior of sintered specimens. After sintering in dilatometer at 1500 °C, the powder was converted to single phase MgAl2O4. The results show that mechanical activation improved the densification behavior of MgAl2O4 sintered specimens, and it reduced the onset temperature for sintering by approx. 100 oC. Based on dilatometer data, powders were subsequently densified at 1450 oC by hot pressing. Almost аll specimens exhibited full density, while sample activated for 30 minutes showed the fastest densification rate.
PB  - ETRAN
T2  - Science of Sintering
T1  - Characterization of MgAl2O4 sintered ceramics
SP  - 363
EP  - 376
VL  - 51
IS  - 4
DO  - 10.2298/SOS1904363O
UR  - https://hdl.handle.net/21.15107/rcub_dais_6949
ER  - 
@article{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Corlett, Cole and Đorđević, Pavle and Rogan, Jelena and Vulić, Predrag J. and Buljak, Vladimir and Pavlović, Vladimir B.",
year = "2019",
abstract = "Single phase MgAl2O4 was made from a one-to-one molar ratio of MgO and Al2O3 powders mixed using ball-milling. Mixtures of MgO and Al2O3 were subsequently treated in planetary ball mill for 30, 60, 90 and 120 minutes in air. The aim of this study was to examine phase composition, microstructure, and densification behavior of sintered specimens. After sintering in dilatometer at 1500 °C, the powder was converted to single phase MgAl2O4. The results show that mechanical activation improved the densification behavior of MgAl2O4 sintered specimens, and it reduced the onset temperature for sintering by approx. 100 oC. Based on dilatometer data, powders were subsequently densified at 1450 oC by hot pressing. Almost аll specimens exhibited full density, while sample activated for 30 minutes showed the fastest densification rate.",
publisher = "ETRAN",
journal = "Science of Sintering",
title = "Characterization of MgAl2O4 sintered ceramics",
pages = "363-376",
volume = "51",
number = "4",
doi = "10.2298/SOS1904363O",
url = "https://hdl.handle.net/21.15107/rcub_dais_6949"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Corlett, C., Đorđević, P., Rogan, J., Vulić, P. J., Buljak, V.,& Pavlović, V. B.. (2019). Characterization of MgAl2O4 sintered ceramics. in Science of Sintering
ETRAN., 51(4), 363-376.
https://doi.org/10.2298/SOS1904363O
https://hdl.handle.net/21.15107/rcub_dais_6949
Obradović N, Fahrenholtz WG, Filipović S, Corlett C, Đorđević P, Rogan J, Vulić PJ, Buljak V, Pavlović VB. Characterization of MgAl2O4 sintered ceramics. in Science of Sintering. 2019;51(4):363-376.
doi:10.2298/SOS1904363O
https://hdl.handle.net/21.15107/rcub_dais_6949 .
Obradović, Nina, Fahrenholtz, William G., Filipović, Suzana, Corlett, Cole, Đorđević, Pavle, Rogan, Jelena, Vulić, Predrag J., Buljak, Vladimir, Pavlović, Vladimir B., "Characterization of MgAl2O4 sintered ceramics" in Science of Sintering, 51, no. 4 (2019):363-376,
https://doi.org/10.2298/SOS1904363O .,
https://hdl.handle.net/21.15107/rcub_dais_6949 .
2
5
5

Electrical and mechanical properties of alumina doped with transition metal oxides sintered at 1400°C

Filipović, Suzana; Obradović, Nina; Marković, Smilja; Balać, Igor; Đorđević, Antonije; Pavlović, Vladimir B.

(Societa ceramica italiana, 2019)

TY  - CONF
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Marković, Smilja
AU  - Balać, Igor
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/7025
AB  - Corundum (alpha-alumina) is one of the most exploited materials in ceramic industry due to its good physico-chemical properties, mechanical properties, and, importantly, due to its low cost. Advantageous properties, such as hardness, dielectric and thermal properties, and refractoriness, open the door to a wide range of applications of corundum. Porous alumina ceramics is often used for filters and as a catalytic substrate, whereas dense alumina ceramics is frequently used in automotive and aerospace industry. Hence, there is a great interest in exploring this type of ceramics. The aim of this work is to explain the influence of preparation parameters (mechanical activation, addition of transition metal oxides, and sintering conditions) on the final electrical and mechanical properties of alumina. 
As a starting powder, a mix of a few alumina modifications (α-, κ-,γ - Al2O3) was used. It was doped with 1 wt % of Mn2O3, Cr2O3, and NiO, respectively. Three of the obtained mixtures were homogenized and three were ball milled for 60 min. Particle size analysis, SEM, and EDS were performed in order to demonstrate changes in the microstructure after milling. DTA/TG analyses were used to determine all characteristic temperatures. After sintering at 1400 oC in an air atmosphere, mechanical, electrical, and physico-chemical properties of the obtained ceramics were determined. 
Results showed that the mechanical treatment lead to a decrease in temperatures of phase transitions and sintering for approximately 100 oC. Incorporation of cations of transition metals into the crystal lattice of alumina was noticed. Activated and sintered samples showed a higher tensile strength and higher relative dielectric permittivity then the sample doped with Cr2O3. 
The main conclusion of this investigation is that the mechanical activation has the dominant influence on lowering the characteristic temperatures of all detected phase transitions and sintering processes. Using a mixture of several crystalline phases of alumina as a starting powder alleviates the incorporation of transition-metal cations into the alumina crystal lattice, leading to changes in microstructures of the prepared ceramics. Finally, changes in the microstructure and lattice disordering have the dominant influence on the final mechanical properties.
PB  - Societa ceramica italiana
PB  - Politecnico di Torino
C3  - Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019
T1  - Electrical and mechanical properties of alumina doped with transition metal oxides sintered at 1400°C
SP  - 682
EP  - 682
UR  - https://hdl.handle.net/21.15107/rcub_dais_7025
ER  - 
@conference{
author = "Filipović, Suzana and Obradović, Nina and Marković, Smilja and Balać, Igor and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2019",
abstract = "Corundum (alpha-alumina) is one of the most exploited materials in ceramic industry due to its good physico-chemical properties, mechanical properties, and, importantly, due to its low cost. Advantageous properties, such as hardness, dielectric and thermal properties, and refractoriness, open the door to a wide range of applications of corundum. Porous alumina ceramics is often used for filters and as a catalytic substrate, whereas dense alumina ceramics is frequently used in automotive and aerospace industry. Hence, there is a great interest in exploring this type of ceramics. The aim of this work is to explain the influence of preparation parameters (mechanical activation, addition of transition metal oxides, and sintering conditions) on the final electrical and mechanical properties of alumina. 
As a starting powder, a mix of a few alumina modifications (α-, κ-,γ - Al2O3) was used. It was doped with 1 wt % of Mn2O3, Cr2O3, and NiO, respectively. Three of the obtained mixtures were homogenized and three were ball milled for 60 min. Particle size analysis, SEM, and EDS were performed in order to demonstrate changes in the microstructure after milling. DTA/TG analyses were used to determine all characteristic temperatures. After sintering at 1400 oC in an air atmosphere, mechanical, electrical, and physico-chemical properties of the obtained ceramics were determined. 
Results showed that the mechanical treatment lead to a decrease in temperatures of phase transitions and sintering for approximately 100 oC. Incorporation of cations of transition metals into the crystal lattice of alumina was noticed. Activated and sintered samples showed a higher tensile strength and higher relative dielectric permittivity then the sample doped with Cr2O3. 
The main conclusion of this investigation is that the mechanical activation has the dominant influence on lowering the characteristic temperatures of all detected phase transitions and sintering processes. Using a mixture of several crystalline phases of alumina as a starting powder alleviates the incorporation of transition-metal cations into the alumina crystal lattice, leading to changes in microstructures of the prepared ceramics. Finally, changes in the microstructure and lattice disordering have the dominant influence on the final mechanical properties.",
publisher = "Societa ceramica italiana, Politecnico di Torino",
journal = "Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019",
title = "Electrical and mechanical properties of alumina doped with transition metal oxides sintered at 1400°C",
pages = "682-682",
url = "https://hdl.handle.net/21.15107/rcub_dais_7025"
}
Filipović, S., Obradović, N., Marković, S., Balać, I., Đorđević, A.,& Pavlović, V. B.. (2019). Electrical and mechanical properties of alumina doped with transition metal oxides sintered at 1400°C. in Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019
Societa ceramica italiana., 682-682.
https://hdl.handle.net/21.15107/rcub_dais_7025
Filipović S, Obradović N, Marković S, Balać I, Đorđević A, Pavlović VB. Electrical and mechanical properties of alumina doped with transition metal oxides sintered at 1400°C. in Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019. 2019;:682-682.
https://hdl.handle.net/21.15107/rcub_dais_7025 .
Filipović, Suzana, Obradović, Nina, Marković, Smilja, Balać, Igor, Đorđević, Antonije, Pavlović, Vladimir B., "Electrical and mechanical properties of alumina doped with transition metal oxides sintered at 1400°C" in Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019 (2019):682-682,
https://hdl.handle.net/21.15107/rcub_dais_7025 .

The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Kosanović, Darko; Dapčević, A.; Đorđević, Antonije; Balać, Igor; Pavlović, Vladimir B.

(Elsevier, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Kosanović, Darko
AU  - Dapčević, A.
AU  - Đorđević, Antonije
AU  - Balać, Igor
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0272884219306340
UR  - http://dais.sanu.ac.rs/123456789/5272
AB  - Magnesium aluminate, MgAl2O4 and other alumina-based spinels are ceramics with high hardness, high melting point and mechanical strenght. Spinels can also be used as dielectrics in microwave applications. The goal of this study was to examine the effects of mechanical activation and sintering temperatures on physico-chemical properties of spinel. MgAl2O4 was produced by solid state reaction between MgO and α-Al2O3. The starting powders were mixed by ball milling to homogenize without significant particle size reduction. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 1 h. Powders were compacted at 300 MPa. Heat treatments were performed in air, at temperatures ranging from 1200 to 1600 °C with 2 h dwell time, to determine the amount of spinel formation as a function of temperature. Phase composition and microstructure of initial powders and heated samples were determined by means of X-ray diffraction, particle size analysis, and scanning electron microscopy. The influences of milling and consolidation parameters were studied by electrical measurements and mechanical characterization. The main conclusion of this study was that mechanical activation for 60 min initiated a mechano-chemical reaction, resulted in spinel formation at much lower temperatures than within non-activated powders, and indicated that final sintering stage started at much lower temperatures for activated powders. Changes in microstructure parameters, as a consequence of mechanical treatment and subsequent heating of investigated powder mixtures, strongly affect electrical and mechanical properties of the final ceramics.
PB  - Elsevier
T2  - Ceramics International
T1  - The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics
SP  - 12015
EP  - 12021
VL  - 45
IS  - 9
DO  - 10.1016/j.ceramint.2019.03.095
UR  - https://hdl.handle.net/21.15107/rcub_dais_5272
ER  - 
@article{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Kosanović, Darko and Dapčević, A. and Đorđević, Antonije and Balać, Igor and Pavlović, Vladimir B.",
year = "2019",
abstract = "Magnesium aluminate, MgAl2O4 and other alumina-based spinels are ceramics with high hardness, high melting point and mechanical strenght. Spinels can also be used as dielectrics in microwave applications. The goal of this study was to examine the effects of mechanical activation and sintering temperatures on physico-chemical properties of spinel. MgAl2O4 was produced by solid state reaction between MgO and α-Al2O3. The starting powders were mixed by ball milling to homogenize without significant particle size reduction. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 1 h. Powders were compacted at 300 MPa. Heat treatments were performed in air, at temperatures ranging from 1200 to 1600 °C with 2 h dwell time, to determine the amount of spinel formation as a function of temperature. Phase composition and microstructure of initial powders and heated samples were determined by means of X-ray diffraction, particle size analysis, and scanning electron microscopy. The influences of milling and consolidation parameters were studied by electrical measurements and mechanical characterization. The main conclusion of this study was that mechanical activation for 60 min initiated a mechano-chemical reaction, resulted in spinel formation at much lower temperatures than within non-activated powders, and indicated that final sintering stage started at much lower temperatures for activated powders. Changes in microstructure parameters, as a consequence of mechanical treatment and subsequent heating of investigated powder mixtures, strongly affect electrical and mechanical properties of the final ceramics.",
publisher = "Elsevier",
journal = "Ceramics International",
title = "The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics",
pages = "12015-12021",
volume = "45",
number = "9",
doi = "10.1016/j.ceramint.2019.03.095",
url = "https://hdl.handle.net/21.15107/rcub_dais_5272"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Kosanović, D., Dapčević, A., Đorđević, A., Balać, I.,& Pavlović, V. B.. (2019). The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics. in Ceramics International
Elsevier., 45(9), 12015-12021.
https://doi.org/10.1016/j.ceramint.2019.03.095
https://hdl.handle.net/21.15107/rcub_dais_5272
Obradović N, Fahrenholtz WG, Filipović S, Kosanović D, Dapčević A, Đorđević A, Balać I, Pavlović VB. The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics. in Ceramics International. 2019;45(9):12015-12021.
doi:10.1016/j.ceramint.2019.03.095
https://hdl.handle.net/21.15107/rcub_dais_5272 .
Obradović, Nina, Fahrenholtz, William G., Filipović, Suzana, Kosanović, Darko, Dapčević, A., Đorđević, Antonije, Balać, Igor, Pavlović, Vladimir B., "The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics" in Ceramics International, 45, no. 9 (2019):12015-12021,
https://doi.org/10.1016/j.ceramint.2019.03.095 .,
https://hdl.handle.net/21.15107/rcub_dais_5272 .
10
10
8

The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Kosanović, Darko; Dapčević, A.; Đorđević, Antonije; Balać, Igor; Pavlović, Vladimir B.

(Elsevier, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Kosanović, Darko
AU  - Dapčević, A.
AU  - Đorđević, Antonije
AU  - Balać, Igor
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0272884219306340
UR  - http://dais.sanu.ac.rs/123456789/5763
AB  - Magnesium aluminate, MgAl2O4 and other alumina-based spinels are ceramics with high hardness, high melting point and mechanical strenght. Spinels can also be used as dielectrics in microwave applications. The goal of this study was to examine the effects of mechanical activation and sintering temperatures on physico-chemical properties of spinel. MgAl2O4 was produced by solid state reaction between MgO and α-Al2O3. The starting powders were mixed by ball milling to homogenize without significant particle size reduction. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 1 h. Powders were compacted at 300 MPa. Heat treatments were performed in air, at temperatures ranging from 1200 to 1600 °C with 2 h dwell time, to determine the amount of spinel formation as a function of temperature. Phase composition and microstructure of initial powders and heated samples were determined by means of X-ray diffraction, particle size analysis, and scanning electron microscopy. The influences of milling and consolidation parameters were studied by electrical measurements and mechanical characterization. The main conclusion of this study was that mechanical activation for 60 min initiated a mechano-chemical reaction, resulted in spinel formation at much lower temperatures than within non-activated powders, and indicated that final sintering stage started at much lower temperatures for activated powders. Changes in microstructure parameters, as a consequence of mechanical treatment and subsequent heating of investigated powder mixtures, strongly affect electrical and mechanical properties of the final ceramics.
PB  - Elsevier
T2  - Ceramics International
T1  - The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics
SP  - 12015
EP  - 12021
VL  - 45
IS  - 9
DO  - 10.1016/j.ceramint.2019.03.095
UR  - https://hdl.handle.net/21.15107/rcub_dais_5763
ER  - 
@article{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Kosanović, Darko and Dapčević, A. and Đorđević, Antonije and Balać, Igor and Pavlović, Vladimir B.",
year = "2019",
abstract = "Magnesium aluminate, MgAl2O4 and other alumina-based spinels are ceramics with high hardness, high melting point and mechanical strenght. Spinels can also be used as dielectrics in microwave applications. The goal of this study was to examine the effects of mechanical activation and sintering temperatures on physico-chemical properties of spinel. MgAl2O4 was produced by solid state reaction between MgO and α-Al2O3. The starting powders were mixed by ball milling to homogenize without significant particle size reduction. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 1 h. Powders were compacted at 300 MPa. Heat treatments were performed in air, at temperatures ranging from 1200 to 1600 °C with 2 h dwell time, to determine the amount of spinel formation as a function of temperature. Phase composition and microstructure of initial powders and heated samples were determined by means of X-ray diffraction, particle size analysis, and scanning electron microscopy. The influences of milling and consolidation parameters were studied by electrical measurements and mechanical characterization. The main conclusion of this study was that mechanical activation for 60 min initiated a mechano-chemical reaction, resulted in spinel formation at much lower temperatures than within non-activated powders, and indicated that final sintering stage started at much lower temperatures for activated powders. Changes in microstructure parameters, as a consequence of mechanical treatment and subsequent heating of investigated powder mixtures, strongly affect electrical and mechanical properties of the final ceramics.",
publisher = "Elsevier",
journal = "Ceramics International",
title = "The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics",
pages = "12015-12021",
volume = "45",
number = "9",
doi = "10.1016/j.ceramint.2019.03.095",
url = "https://hdl.handle.net/21.15107/rcub_dais_5763"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Kosanović, D., Dapčević, A., Đorđević, A., Balać, I.,& Pavlović, V. B.. (2019). The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics. in Ceramics International
Elsevier., 45(9), 12015-12021.
https://doi.org/10.1016/j.ceramint.2019.03.095
https://hdl.handle.net/21.15107/rcub_dais_5763
Obradović N, Fahrenholtz WG, Filipović S, Kosanović D, Dapčević A, Đorđević A, Balać I, Pavlović VB. The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics. in Ceramics International. 2019;45(9):12015-12021.
doi:10.1016/j.ceramint.2019.03.095
https://hdl.handle.net/21.15107/rcub_dais_5763 .
Obradović, Nina, Fahrenholtz, William G., Filipović, Suzana, Kosanović, Darko, Dapčević, A., Đorđević, Antonije, Balać, Igor, Pavlović, Vladimir B., "The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics" in Ceramics International, 45, no. 9 (2019):12015-12021,
https://doi.org/10.1016/j.ceramint.2019.03.095 .,
https://hdl.handle.net/21.15107/rcub_dais_5763 .
10
10
8

Effects of ball-milling on properties of sintered alumina doped with Mn2O3

Filipović, Suzana; Obradović, Nina; Marković, Smilja; Mitrić, Miodrag; Đorđević, Antonije; Dapčević, Aleksandra; Rogan, Jelena; Pavlović, Vladimir B.

(Belgrade : Serbian Ceramic Society, 2018)

TY  - CONF
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Marković, Smilja
AU  - Mitrić, Miodrag
AU  - Đorđević, Antonije
AU  - Dapčević, Aleksandra
AU  - Rogan, Jelena
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/4114
AB  - Recently, with the huge use of smart gadgets, developing of smart jewelry represents a very interesting segment in material science, as well as in electronic science. Alumina is widely used ceramic in many industrial fields as pigments, catalysis, microelectronics, etc., mostly because of its low cost and appropriate mechanical and electrical properties, high surface area and thermal stability. Also, modified alumina could be applied in production of smart jewelry. Thus, the main objectives of this investigation is to improve features of sintered alumina doped with Mn2O3 along with mechanical treatment, in order to obtain strong ceramic with low values of dielectric loss and low relative dielectric permittivity, as well as esthetic. Commercial alumina powder was doped with 1 wt % of manganese oxide and treated in planetary ball mill for an hour. Characteristic temperatures of both powders (non-activated and activated one) were investigated in detail by DTA and TG analyses. After sintering at 1200, 1300, and 1400 oC for 2 h, XRD patterns and SEM images were recorded. Furthermore, mechanical and electrical properties were examined for all sintered samples.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018
T1  - Effects of ball-milling on properties of sintered alumina doped with Mn2O3
SP  - 75
EP  - 75
UR  - https://hdl.handle.net/21.15107/rcub_dais_4114
ER  - 
@conference{
author = "Filipović, Suzana and Obradović, Nina and Marković, Smilja and Mitrić, Miodrag and Đorđević, Antonije and Dapčević, Aleksandra and Rogan, Jelena and Pavlović, Vladimir B.",
year = "2018",
abstract = "Recently, with the huge use of smart gadgets, developing of smart jewelry represents a very interesting segment in material science, as well as in electronic science. Alumina is widely used ceramic in many industrial fields as pigments, catalysis, microelectronics, etc., mostly because of its low cost and appropriate mechanical and electrical properties, high surface area and thermal stability. Also, modified alumina could be applied in production of smart jewelry. Thus, the main objectives of this investigation is to improve features of sintered alumina doped with Mn2O3 along with mechanical treatment, in order to obtain strong ceramic with low values of dielectric loss and low relative dielectric permittivity, as well as esthetic. Commercial alumina powder was doped with 1 wt % of manganese oxide and treated in planetary ball mill for an hour. Characteristic temperatures of both powders (non-activated and activated one) were investigated in detail by DTA and TG analyses. After sintering at 1200, 1300, and 1400 oC for 2 h, XRD patterns and SEM images were recorded. Furthermore, mechanical and electrical properties were examined for all sintered samples.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018",
title = "Effects of ball-milling on properties of sintered alumina doped with Mn2O3",
pages = "75-75",
url = "https://hdl.handle.net/21.15107/rcub_dais_4114"
}
Filipović, S., Obradović, N., Marković, S., Mitrić, M., Đorđević, A., Dapčević, A., Rogan, J.,& Pavlović, V. B.. (2018). Effects of ball-milling on properties of sintered alumina doped with Mn2O3. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018
Belgrade : Serbian Ceramic Society., 75-75.
https://hdl.handle.net/21.15107/rcub_dais_4114
Filipović S, Obradović N, Marković S, Mitrić M, Đorđević A, Dapčević A, Rogan J, Pavlović VB. Effects of ball-milling on properties of sintered alumina doped with Mn2O3. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018. 2018;:75-75.
https://hdl.handle.net/21.15107/rcub_dais_4114 .
Filipović, Suzana, Obradović, Nina, Marković, Smilja, Mitrić, Miodrag, Đorđević, Antonije, Dapčević, Aleksandra, Rogan, Jelena, Pavlović, Vladimir B., "Effects of ball-milling on properties of sintered alumina doped with Mn2O3" in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018 (2018):75-75,
https://hdl.handle.net/21.15107/rcub_dais_4114 .

Physical Properties of Sintered Alumina Doped with Different Oxides

Filipović, Suzana; Obradović, Nina; Marković, Smilja; Đorđević, Antonije; Balać, Igor; Dapčević, Aleksandra; Rogan, Jelena; Pavlović, Vladimir B.

(Belgrade : ETRAN, 2018)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Marković, Smilja
AU  - Đorđević, Antonije
AU  - Balać, Igor
AU  - Dapčević, Aleksandra
AU  - Rogan, Jelena
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/4537
AB  - Corundum (α-alumina) is a suitable material for usage in various industry fields owing to its chemical stability, electrical and mechanical features. It is known that properties of ceramics could be modified by addition of different oxides, as well as by changing the consolidation parameters. In this respect, alumina was doped with 1 wt.% of Cr2O3, Mn2O3 and NiO, followed by 1 hour of mechanical activation in a high-energy planetary ball mill. A sensitive dilatometer was used for sintering of powder mixtures up to 1400 oC and recording the obtained dilatation. The final density varied between cca. 1.9 and 3.3 g/cm3. Microstructural changes were detected by SEM measurements. Changes in electrical permittivity and loss tangent were associated with the preparation conditions (types of additives, duration of mechanical activation). For a given mixture, the sintering increases the relative permittivity and decreases losses, exhibiting the optimal values of 8.32 and 0.027, respectively, for the sample activated 60 minutes and sintered, with the addition of MnO2. Mechanical measurements indicate significant differences in strength with the addition of different transition metal oxides. Samples with Mn and Ni, activated and sintered, with strength of 121 and 86 MPa, respectively, have a significantly higher tensile strength than the other tested samples, due to their more compact microstructures.
PB  - Belgrade : ETRAN
T2  - Science of Sintering
T1  - Physical Properties of Sintered Alumina Doped with Different Oxides
SP  - 409
EP  - 419
VL  - 50
IS  - 4
DO  - 10.2298/SOS1804409F
UR  - https://hdl.handle.net/21.15107/rcub_dais_4537
ER  - 
@article{
author = "Filipović, Suzana and Obradović, Nina and Marković, Smilja and Đorđević, Antonije and Balać, Igor and Dapčević, Aleksandra and Rogan, Jelena and Pavlović, Vladimir B.",
year = "2018",
abstract = "Corundum (α-alumina) is a suitable material for usage in various industry fields owing to its chemical stability, electrical and mechanical features. It is known that properties of ceramics could be modified by addition of different oxides, as well as by changing the consolidation parameters. In this respect, alumina was doped with 1 wt.% of Cr2O3, Mn2O3 and NiO, followed by 1 hour of mechanical activation in a high-energy planetary ball mill. A sensitive dilatometer was used for sintering of powder mixtures up to 1400 oC and recording the obtained dilatation. The final density varied between cca. 1.9 and 3.3 g/cm3. Microstructural changes were detected by SEM measurements. Changes in electrical permittivity and loss tangent were associated with the preparation conditions (types of additives, duration of mechanical activation). For a given mixture, the sintering increases the relative permittivity and decreases losses, exhibiting the optimal values of 8.32 and 0.027, respectively, for the sample activated 60 minutes and sintered, with the addition of MnO2. Mechanical measurements indicate significant differences in strength with the addition of different transition metal oxides. Samples with Mn and Ni, activated and sintered, with strength of 121 and 86 MPa, respectively, have a significantly higher tensile strength than the other tested samples, due to their more compact microstructures.",
publisher = "Belgrade : ETRAN",
journal = "Science of Sintering",
title = "Physical Properties of Sintered Alumina Doped with Different Oxides",
pages = "409-419",
volume = "50",
number = "4",
doi = "10.2298/SOS1804409F",
url = "https://hdl.handle.net/21.15107/rcub_dais_4537"
}
Filipović, S., Obradović, N., Marković, S., Đorđević, A., Balać, I., Dapčević, A., Rogan, J.,& Pavlović, V. B.. (2018). Physical Properties of Sintered Alumina Doped with Different Oxides. in Science of Sintering
Belgrade : ETRAN., 50(4), 409-419.
https://doi.org/10.2298/SOS1804409F
https://hdl.handle.net/21.15107/rcub_dais_4537
Filipović S, Obradović N, Marković S, Đorđević A, Balać I, Dapčević A, Rogan J, Pavlović VB. Physical Properties of Sintered Alumina Doped with Different Oxides. in Science of Sintering. 2018;50(4):409-419.
doi:10.2298/SOS1804409F
https://hdl.handle.net/21.15107/rcub_dais_4537 .
Filipović, Suzana, Obradović, Nina, Marković, Smilja, Đorđević, Antonije, Balać, Igor, Dapčević, Aleksandra, Rogan, Jelena, Pavlović, Vladimir B., "Physical Properties of Sintered Alumina Doped with Different Oxides" in Science of Sintering, 50, no. 4 (2018):409-419,
https://doi.org/10.2298/SOS1804409F .,
https://hdl.handle.net/21.15107/rcub_dais_4537 .
4
11
11

Sintering of alumina doped with different oxides, followed by sensitive dilatometer

Filipović, Suzana; Obradović, Nina; Marković, Smilja; Đorđević, Antonije; Dapčević, Aleksandra; Rogan, Jelena; Pavlović, Vladimir B.

(Belgrade : Materials Research Society of Serbia, 2018)

TY  - CONF
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Marković, Smilja
AU  - Đorđević, Antonije
AU  - Dapčević, Aleksandra
AU  - Rogan, Jelena
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/3634
AB  - Sintered alumina powder represents suitable material for usage in various industry fields (e.g., as chip carriers in electronics, microwaves, jewelry production), due to convenient physical properties, such as sinterability, electrical and mechanical features. Those properties can be modified by addition of different oxides and/or mechanical treatment. Therefore, in this investigation the alumina was doped with 1 wt. % of Cr2O3, Mn2O3 and NiO, respectively, followed by 1 hour of mechanical activation at 400 rpm in planetary ball mill. Sintering of powder mixtures was tracked by sensitive dilatometer up to 1400 °C. The final density values varied from cca. 2 ̶ 3.2 g/cm3. Changes in microstructure were observed by means of SEM. The influence of additives along with mechanical activation is monitored trough changes in electrical permittivity and loss tangent. Compared to pure alumina, the additives lower the relative permittivity and increase dielectric losses. For a given mixture, the sintering increases the relative permittivity and decreases losses.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018
T1  - Sintering of alumina doped with different oxides, followed by sensitive dilatometer
SP  - 95
EP  - 95
UR  - https://hdl.handle.net/21.15107/rcub_dais_3634
ER  - 
@conference{
author = "Filipović, Suzana and Obradović, Nina and Marković, Smilja and Đorđević, Antonije and Dapčević, Aleksandra and Rogan, Jelena and Pavlović, Vladimir B.",
year = "2018",
abstract = "Sintered alumina powder represents suitable material for usage in various industry fields (e.g., as chip carriers in electronics, microwaves, jewelry production), due to convenient physical properties, such as sinterability, electrical and mechanical features. Those properties can be modified by addition of different oxides and/or mechanical treatment. Therefore, in this investigation the alumina was doped with 1 wt. % of Cr2O3, Mn2O3 and NiO, respectively, followed by 1 hour of mechanical activation at 400 rpm in planetary ball mill. Sintering of powder mixtures was tracked by sensitive dilatometer up to 1400 °C. The final density values varied from cca. 2 ̶ 3.2 g/cm3. Changes in microstructure were observed by means of SEM. The influence of additives along with mechanical activation is monitored trough changes in electrical permittivity and loss tangent. Compared to pure alumina, the additives lower the relative permittivity and increase dielectric losses. For a given mixture, the sintering increases the relative permittivity and decreases losses.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018",
title = "Sintering of alumina doped with different oxides, followed by sensitive dilatometer",
pages = "95-95",
url = "https://hdl.handle.net/21.15107/rcub_dais_3634"
}
Filipović, S., Obradović, N., Marković, S., Đorđević, A., Dapčević, A., Rogan, J.,& Pavlović, V. B.. (2018). Sintering of alumina doped with different oxides, followed by sensitive dilatometer. in Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018
Belgrade : Materials Research Society of Serbia., 95-95.
https://hdl.handle.net/21.15107/rcub_dais_3634
Filipović S, Obradović N, Marković S, Đorđević A, Dapčević A, Rogan J, Pavlović VB. Sintering of alumina doped with different oxides, followed by sensitive dilatometer. in Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018. 2018;:95-95.
https://hdl.handle.net/21.15107/rcub_dais_3634 .
Filipović, Suzana, Obradović, Nina, Marković, Smilja, Đorđević, Antonije, Dapčević, Aleksandra, Rogan, Jelena, Pavlović, Vladimir B., "Sintering of alumina doped with different oxides, followed by sensitive dilatometer" in Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018 (2018):95-95,
https://hdl.handle.net/21.15107/rcub_dais_3634 .