TY  - CONF
AU  - Čebela, Maria
AU  - Reddy, Priyanka
AU  - Čakar, Uroš
AU  - Labus, Nebojša
AU  - Lojpur, Vesna
AU  - Dodevski, Vladimir
AU  - Rosić, Milena
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/14660
AB  - Iron(III) titanates are attracting rapidly growing interest as very promising candidates for applications in solar energy and optoelectronics because they contain earth-rich elements. Potentially, Fe2TiO5 is a thermoelectric material. We used a Vibrating Sample Magnetometer and Superconducting Quantum Interferometer Device Magnetometer to study the magnetic properties of the pseudobrookite material Fe2TiO5. The material was synthesized by the sol-gel method. The structural parameters of the synthesized samples were investigated by X-ray analysis. The diffractogram was refined with the help of Rietveld refinement on FullProf Suite. Temperature-dependent ZFC and FC magnetization was measured on SQUID for lower temperature down to 2 K and on VSM for higher temperatures up to 1000 K. A transition was observed at 815 K with a separation between the ZFC and FC curves. Parallelly the bifurcation in the isothermal hysteresis measurements indicates that the system exhibits dominant canted AFM (or weak FM) with a small amount of spin glass. The small value of the moment was also pointing towards the canted AFM ordering. The size and morphology of the particles was determined using transmission electron microscopy (TEM) and scanning electron microscopy (SEM).
PB  - Belgrade : Institut za multidisciplinarna istraživanja
C3  - Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade, Serbia
T1  - Synthesis, structure and magnetic properties of Fe2TiO5
UR  - https://hdl.handle.net/21.15107/rcub_dais_14660
ER  - 

@conference{
author = "Čebela, Maria and Reddy, Priyanka and Čakar, Uroš and Labus, Nebojša and Lojpur, Vesna and Dodevski, Vladimir and Rosić, Milena",
year = "2023",
abstract = "Iron(III) titanates are attracting rapidly growing interest as very promising candidates for applications in solar energy and optoelectronics because they contain earth-rich elements. Potentially, Fe2TiO5 is a thermoelectric material. We used a Vibrating Sample Magnetometer and Superconducting Quantum Interferometer Device Magnetometer to study the magnetic properties of the pseudobrookite material Fe2TiO5. The material was synthesized by the sol-gel method. The structural parameters of the synthesized samples were investigated by X-ray analysis. The diffractogram was refined with the help of Rietveld refinement on FullProf Suite. Temperature-dependent ZFC and FC magnetization was measured on SQUID for lower temperature down to 2 K and on VSM for higher temperatures up to 1000 K. A transition was observed at 815 K with a separation between the ZFC and FC curves. Parallelly the bifurcation in the isothermal hysteresis measurements indicates that the system exhibits dominant canted AFM (or weak FM) with a small amount of spin glass. The small value of the moment was also pointing towards the canted AFM ordering. The size and morphology of the particles was determined using transmission electron microscopy (TEM) and scanning electron microscopy (SEM).",
publisher = "Belgrade : Institut za multidisciplinarna istraživanja",
journal = "Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade, Serbia",
title = "Synthesis, structure and magnetic properties of Fe2TiO5",
url = "https://hdl.handle.net/21.15107/rcub_dais_14660"
}

Čebela, M., Reddy, P., Čakar, U., Labus, N., Lojpur, V., Dodevski, V.,& Rosić, M.. (2023). Synthesis, structure and magnetic properties of Fe2TiO5. in Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade, Serbia
Belgrade : Institut za multidisciplinarna istraživanja..
https://hdl.handle.net/21.15107/rcub_dais_14660

Čebela M, Reddy P, Čakar U, Labus N, Lojpur V, Dodevski V, Rosić M. Synthesis, structure and magnetic properties of Fe2TiO5. in Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade, Serbia. 2023;.
https://hdl.handle.net/21.15107/rcub_dais_14660 .

Čebela, Maria, Reddy, Priyanka, Čakar, Uroš, Labus, Nebojša, Lojpur, Vesna, Dodevski, Vladimir, Rosić, Milena, "Synthesis, structure and magnetic properties of Fe2TiO5" in Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade, Serbia (2023),
https://hdl.handle.net/21.15107/rcub_dais_14660 .

TY  - CONF
AU  - Rosić, Milena
AU  - Milivojević, Dušan
AU  - Labus, Nebojša
AU  - Čebela, Maria
AU  - Dodevski, Vladimir
AU  - Jordanov, Dragana
AU  - Stojmenović, Marija
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11899
AB  - Experimental and theoretical methods have been used to investigate the octahedral tilting and related effects of Ca1-xGdxMnO3(x = 0.05; 0.1; 0.15; 0.2) compound. Both methods have shown that orthorhombic-perovskite structure (space group Pnma) is the most stable form and according to Glazer's classification belongs to a-b+a- tilt system. Bond valence calculations (BVC) have shown ten additional perovskite-related modifications of the equilibrium Ca1- xGdxMnO3 structure, and their stability has been investigated as function of Gd doping. We have further studied the influence of gadolinium amount on Mn-О bond angles and distances, tilting of MnO6octahedra around all three axes and deformation due to the presence of Jahn- Teller distortion around Mn3+ cation, and calculated the amount of Mn3+ in the system. BVC approach is a simple, fast and efficient way of calculating the amount of Mn4+ and Mn3+ in the doped perovskite compound, which, to the best of our knowledge, has not been done before. The infrared reflection spectra of Ca1-xGdxMnO3 samples confirmed XRD results that Ca1-xGdxMnO3 nanopowders are of Pnma-1 structure and that the tilting of octahedra are increased with Gd doping. The EPR (electron paramagnetic resonance) spectra are in accordance with the assumption that EPR line width is Mn-O-Mn angle dependent. The studied samples showed that small octahedra tilting in these samples brought only a small change of the EPR line width.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
T1  - Experimental and theoretical study of nanostructured Ca1-xGdxMnO3 (x=0.05; 0.1; 0.15; 0.2)
SP  - 70
EP  - 70
UR  - https://hdl.handle.net/21.15107/rcub_dais_11899
ER  - 

@conference{
author = "Rosić, Milena and Milivojević, Dušan and Labus, Nebojša and Čebela, Maria and Dodevski, Vladimir and Jordanov, Dragana and Stojmenović, Marija",
year = "2021",
abstract = "Experimental and theoretical methods have been used to investigate the octahedral tilting and related effects of Ca1-xGdxMnO3(x = 0.05; 0.1; 0.15; 0.2) compound. Both methods have shown that orthorhombic-perovskite structure (space group Pnma) is the most stable form and according to Glazer's classification belongs to a-b+a- tilt system. Bond valence calculations (BVC) have shown ten additional perovskite-related modifications of the equilibrium Ca1- xGdxMnO3 structure, and their stability has been investigated as function of Gd doping. We have further studied the influence of gadolinium amount on Mn-О bond angles and distances, tilting of MnO6octahedra around all three axes and deformation due to the presence of Jahn- Teller distortion around Mn3+ cation, and calculated the amount of Mn3+ in the system. BVC approach is a simple, fast and efficient way of calculating the amount of Mn4+ and Mn3+ in the doped perovskite compound, which, to the best of our knowledge, has not been done before. The infrared reflection spectra of Ca1-xGdxMnO3 samples confirmed XRD results that Ca1-xGdxMnO3 nanopowders are of Pnma-1 structure and that the tilting of octahedra are increased with Gd doping. The EPR (electron paramagnetic resonance) spectra are in accordance with the assumption that EPR line width is Mn-O-Mn angle dependent. The studied samples showed that small octahedra tilting in these samples brought only a small change of the EPR line width.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021",
title = "Experimental and theoretical study of nanostructured Ca1-xGdxMnO3 (x=0.05; 0.1; 0.15; 0.2)",
pages = "70-70",
url = "https://hdl.handle.net/21.15107/rcub_dais_11899"
}

Rosić, M., Milivojević, D., Labus, N., Čebela, M., Dodevski, V., Jordanov, D.,& Stojmenović, M.. (2021). Experimental and theoretical study of nanostructured Ca1-xGdxMnO3 (x=0.05; 0.1; 0.15; 0.2). in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
Belgrade : Serbian Ceramic Society., 70-70.
https://hdl.handle.net/21.15107/rcub_dais_11899

Rosić M, Milivojević D, Labus N, Čebela M, Dodevski V, Jordanov D, Stojmenović M. Experimental and theoretical study of nanostructured Ca1-xGdxMnO3 (x=0.05; 0.1; 0.15; 0.2). in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021. 2021;:70-70.
https://hdl.handle.net/21.15107/rcub_dais_11899 .

Rosić, Milena, Milivojević, Dušan, Labus, Nebojša, Čebela, Maria, Dodevski, Vladimir, Jordanov, Dragana, Stojmenović, Marija, "Experimental and theoretical study of nanostructured Ca1-xGdxMnO3 (x=0.05; 0.1; 0.15; 0.2)" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021 (2021):70-70,
https://hdl.handle.net/21.15107/rcub_dais_11899 .

TY  - JOUR
AU  - Dodevski, Vladimir
AU  - Pagnacco, Maja C.
AU  - Radović, Ivana
AU  - Rosić, Milena
AU  - Janković, Bojan
AU  - Stojmenović, Marija
AU  - Mitić, Vojislav V.
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/8726
AB  - The aim of this research was to obtain a carbon solid residue by the carbonization process of biomass in an inert atmosphere which, through physical activation and chemical treatment (using TEOS - tetraethyl orthosilicate) would allow creation of highly porous and spatially distinct ordered bio-SiC ceramics. The results of carbonization experiments at several operating temperatures and activation of carbons with multiple-cycle treatments TEOS clearly showed the possibility of obtaining SiC nano-structures, after performing the carbothermal reduction at 1400 °C. The increase in the activation temperature and the duration time starts the development of the SiC particles inside the porous structure. The XRPD analysis showed that the major SiC polytype has cubic SiC (β-SiC) structure and remainder is hexagonal SiC polytypic (α-SiC) structure. It was established that the carbons obtained from carbonization of the Platanus orientalis L. plane tree fruit (PTF) precursor and activated at 850 °C with longer holding times (1 and 2 h) exhibit β-SiC (cubic) nano-wires. A possible nano-wires increment mechanism was suggested. The obtained results represent significant contribution in understanding the process as well as the main characteristics of SiC nano-materials and their possible applications.
PB  - Elsevier
T2  - Materials Chemistry and Physics
T1  - Characterization of silicon carbide ceramics obtained from porous carbon structure achieved by plant carbonization
SP  - 122768
VL  - 245
DO  - 10.1016/j.matchemphys.2020.122768
UR  - https://hdl.handle.net/21.15107/rcub_dais_8726
ER  - 

@article{
author = "Dodevski, Vladimir and Pagnacco, Maja C. and Radović, Ivana and Rosić, Milena and Janković, Bojan and Stojmenović, Marija and Mitić, Vojislav V.",
year = "2020",
abstract = "The aim of this research was to obtain a carbon solid residue by the carbonization process of biomass in an inert atmosphere which, through physical activation and chemical treatment (using TEOS - tetraethyl orthosilicate) would allow creation of highly porous and spatially distinct ordered bio-SiC ceramics. The results of carbonization experiments at several operating temperatures and activation of carbons with multiple-cycle treatments TEOS clearly showed the possibility of obtaining SiC nano-structures, after performing the carbothermal reduction at 1400 °C. The increase in the activation temperature and the duration time starts the development of the SiC particles inside the porous structure. The XRPD analysis showed that the major SiC polytype has cubic SiC (β-SiC) structure and remainder is hexagonal SiC polytypic (α-SiC) structure. It was established that the carbons obtained from carbonization of the Platanus orientalis L. plane tree fruit (PTF) precursor and activated at 850 °C with longer holding times (1 and 2 h) exhibit β-SiC (cubic) nano-wires. A possible nano-wires increment mechanism was suggested. The obtained results represent significant contribution in understanding the process as well as the main characteristics of SiC nano-materials and their possible applications.",
publisher = "Elsevier",
journal = "Materials Chemistry and Physics",
title = "Characterization of silicon carbide ceramics obtained from porous carbon structure achieved by plant carbonization",
pages = "122768",
volume = "245",
doi = "10.1016/j.matchemphys.2020.122768",
url = "https://hdl.handle.net/21.15107/rcub_dais_8726"
}

Dodevski, V., Pagnacco, M. C., Radović, I., Rosić, M., Janković, B., Stojmenović, M.,& Mitić, V. V.. (2020). Characterization of silicon carbide ceramics obtained from porous carbon structure achieved by plant carbonization. in Materials Chemistry and Physics
Elsevier., 245, 122768.
https://doi.org/10.1016/j.matchemphys.2020.122768
https://hdl.handle.net/21.15107/rcub_dais_8726

Dodevski V, Pagnacco MC, Radović I, Rosić M, Janković B, Stojmenović M, Mitić VV. Characterization of silicon carbide ceramics obtained from porous carbon structure achieved by plant carbonization. in Materials Chemistry and Physics. 2020;245:122768.
doi:10.1016/j.matchemphys.2020.122768
https://hdl.handle.net/21.15107/rcub_dais_8726 .

Dodevski, Vladimir, Pagnacco, Maja C., Radović, Ivana, Rosić, Milena, Janković, Bojan, Stojmenović, Marija, Mitić, Vojislav V., "Characterization of silicon carbide ceramics obtained from porous carbon structure achieved by plant carbonization" in Materials Chemistry and Physics, 245 (2020):122768,
https://doi.org/10.1016/j.matchemphys.2020.122768 .,
https://hdl.handle.net/21.15107/rcub_dais_8726 .