Rančić, Milica P.

Link to this page

Authority KeyName Variants
orcid::0000-0002-3135-654X
  • Rančić, Milica P. (2)
Projects

Author's Bibliography

Arsenic removal by magnetite-loaded amino modified nano/microcellulose adsorbents: Effect of functionalization and media size

Taleb, Khaled; Markovski, Jasmina; Veličković, Zlate; Rusmirović, Jelena; Rančić, Milica P.; Pavlović, Vladimir B.; Marinković, Aleksandar

(Elsevier, 2019)

TY  - JOUR
AU  - Taleb, Khaled
AU  - Markovski, Jasmina
AU  - Veličković, Zlate
AU  - Rusmirović, Jelena
AU  - Rančić, Milica P.
AU  - Pavlović, Vladimir B.
AU  - Marinković, Aleksandar
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/16007
AB  - Comparative adsorption study related to benefits of parent media size, i.e. microfibrillated cellulose (MC) versus nanocellulose (NC) support, for the preparation of magnetite (MG) based high performance adsorbent for arsenic removal was conducted. Precipitation of MG on amino terminal branched organic structure, L, either linked by maleic acid residue on NC surface (NC-MA/L) or linked by oxalyl bridge on MC surface (MC-O/L) produced NC-MA/L-MG and MC-O/L-MG adsorbents, respectively. Precipitation of nanosized MG on amino functionalized NC-MA/L and MC-O/L, performed according to optimized procedure, contributed to improved textural properties and adsorptive/kinetic performances of novel adsorbents. Adsorption capacity of arsenate, As(V), was in favor of NC-MA/L-MG (85.3 versus 18.5 mg g−1) while MC-O/L-MG exhibited faster kinetics (0.541 versus 0.189 g mg−1 min−1). Lower capacity of arsenite, As(III), removal, 68.3 mg g−1 for NC-MA/L-MG and 17.8 mg g−1 for MC-O/L-MG, were obtained. Calculated activation energies, 13.28 and 10.87 kJ mol−1 for NC-MA/L-MG and MC-O/L-MG with respect to As(V), respectively, suggest, in accordance with results of Weber-Morris fitting, that internal mass transfer controls adsorption process. Model free adsorption kinetics confirmed beneficial uses of MC-O/L-MG due to low activation energy dependence on the extent of adsorption.
PB  - Elsevier
T2  - Arabian Journal of Chemistry
T1  - Arsenic removal by magnetite-loaded amino modified nano/microcellulose adsorbents: Effect of functionalization and media size
SP  - 4675
EP  - 4693
VL  - (2016)
VL  - 12
IS  - 8
DO  - 10.1016/j.arabjc.2016.08.006
UR  - https://hdl.handle.net/21.15107/rcub_dais_16007
ER  - 
@article{
author = "Taleb, Khaled and Markovski, Jasmina and Veličković, Zlate and Rusmirović, Jelena and Rančić, Milica P. and Pavlović, Vladimir B. and Marinković, Aleksandar",
year = "2019",
abstract = "Comparative adsorption study related to benefits of parent media size, i.e. microfibrillated cellulose (MC) versus nanocellulose (NC) support, for the preparation of magnetite (MG) based high performance adsorbent for arsenic removal was conducted. Precipitation of MG on amino terminal branched organic structure, L, either linked by maleic acid residue on NC surface (NC-MA/L) or linked by oxalyl bridge on MC surface (MC-O/L) produced NC-MA/L-MG and MC-O/L-MG adsorbents, respectively. Precipitation of nanosized MG on amino functionalized NC-MA/L and MC-O/L, performed according to optimized procedure, contributed to improved textural properties and adsorptive/kinetic performances of novel adsorbents. Adsorption capacity of arsenate, As(V), was in favor of NC-MA/L-MG (85.3 versus 18.5 mg g−1) while MC-O/L-MG exhibited faster kinetics (0.541 versus 0.189 g mg−1 min−1). Lower capacity of arsenite, As(III), removal, 68.3 mg g−1 for NC-MA/L-MG and 17.8 mg g−1 for MC-O/L-MG, were obtained. Calculated activation energies, 13.28 and 10.87 kJ mol−1 for NC-MA/L-MG and MC-O/L-MG with respect to As(V), respectively, suggest, in accordance with results of Weber-Morris fitting, that internal mass transfer controls adsorption process. Model free adsorption kinetics confirmed beneficial uses of MC-O/L-MG due to low activation energy dependence on the extent of adsorption.",
publisher = "Elsevier",
journal = "Arabian Journal of Chemistry",
title = "Arsenic removal by magnetite-loaded amino modified nano/microcellulose adsorbents: Effect of functionalization and media size",
pages = "4675-4693",
volume = "(2016), 12",
number = "8",
doi = "10.1016/j.arabjc.2016.08.006",
url = "https://hdl.handle.net/21.15107/rcub_dais_16007"
}
Taleb, K., Markovski, J., Veličković, Z., Rusmirović, J., Rančić, M. P., Pavlović, V. B.,& Marinković, A.. (2019). Arsenic removal by magnetite-loaded amino modified nano/microcellulose adsorbents: Effect of functionalization and media size. in Arabian Journal of Chemistry
Elsevier., (2016)(8), 4675-4693.
https://doi.org/10.1016/j.arabjc.2016.08.006
https://hdl.handle.net/21.15107/rcub_dais_16007
Taleb K, Markovski J, Veličković Z, Rusmirović J, Rančić MP, Pavlović VB, Marinković A. Arsenic removal by magnetite-loaded amino modified nano/microcellulose adsorbents: Effect of functionalization and media size. in Arabian Journal of Chemistry. 2019;(2016)(8):4675-4693.
doi:10.1016/j.arabjc.2016.08.006
https://hdl.handle.net/21.15107/rcub_dais_16007 .
Taleb, Khaled, Markovski, Jasmina, Veličković, Zlate, Rusmirović, Jelena, Rančić, Milica P., Pavlović, Vladimir B., Marinković, Aleksandar, "Arsenic removal by magnetite-loaded amino modified nano/microcellulose adsorbents: Effect of functionalization and media size" in Arabian Journal of Chemistry, (2016), no. 8 (2019):4675-4693,
https://doi.org/10.1016/j.arabjc.2016.08.006 .,
https://hdl.handle.net/21.15107/rcub_dais_16007 .
55
39
52

Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites

Rusmirović, Jelena; Ivanović, Jasna; Pavlović, Vladimir B.; Rakić, Vesna M.; Rančić, Milica P.; Đokić, Veljko; Marinković, Aleksandar D.

(Elsevier, 2017)

TY  - JOUR
AU  - Rusmirović, Jelena
AU  - Ivanović, Jasna
AU  - Pavlović, Vladimir B.
AU  - Rakić, Vesna M.
AU  - Rančić, Milica P.
AU  - Đokić, Veljko
AU  - Marinković, Aleksandar D.
PY  - 2017
UR  - https://dais.sanu.ac.rs/123456789/2380
AB  - The influence of modification and vacuum/supercritical CO2 (scCO2) drying methods on the surface properties, morphology and thermal stability of cellulose nanocrystals (NC) was presented in this study. Introduction of reactive vinyl groups on NC surface was performed by either direct esterification with oleic acid, linseed or sunflower oil fatty acids; or by amidation of maleic acid/ethylene diamine with methyl ester of fatty acid. Obtained modified NC (m-NC) were characterized using FTIR and Raman spectroscopy; and by determination of acid, iodine and ester values. Structural analysis of m-NC showed varieties of forms, from spongy to nanostructural non-uniform layered morphology with observable agglomeration, which confirmed morphology dependence on modification/processing methods Thermogravimetry-MS spectrometry showed different thermal stability and degradation pathways of NC/m-NC. Incorporation of 1 wt% of reactive m-NC in unsaturated polyester lead to high performance nanocomposites and contributed to increase of stress at break in the range from 76 to 93%.
PB  - Elsevier
T2  - Carbohydrate Polymers
T1  - Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites
SP  - 64
EP  - 74
VL  - 164
DO  - 10.1016/j.carbpol.2017.01.086
UR  - https://hdl.handle.net/21.15107/rcub_dais_2380
ER  - 
@article{
author = "Rusmirović, Jelena and Ivanović, Jasna and Pavlović, Vladimir B. and Rakić, Vesna M. and Rančić, Milica P. and Đokić, Veljko and Marinković, Aleksandar D.",
year = "2017",
abstract = "The influence of modification and vacuum/supercritical CO2 (scCO2) drying methods on the surface properties, morphology and thermal stability of cellulose nanocrystals (NC) was presented in this study. Introduction of reactive vinyl groups on NC surface was performed by either direct esterification with oleic acid, linseed or sunflower oil fatty acids; or by amidation of maleic acid/ethylene diamine with methyl ester of fatty acid. Obtained modified NC (m-NC) were characterized using FTIR and Raman spectroscopy; and by determination of acid, iodine and ester values. Structural analysis of m-NC showed varieties of forms, from spongy to nanostructural non-uniform layered morphology with observable agglomeration, which confirmed morphology dependence on modification/processing methods Thermogravimetry-MS spectrometry showed different thermal stability and degradation pathways of NC/m-NC. Incorporation of 1 wt% of reactive m-NC in unsaturated polyester lead to high performance nanocomposites and contributed to increase of stress at break in the range from 76 to 93%.",
publisher = "Elsevier",
journal = "Carbohydrate Polymers",
title = "Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites",
pages = "64-74",
volume = "164",
doi = "10.1016/j.carbpol.2017.01.086",
url = "https://hdl.handle.net/21.15107/rcub_dais_2380"
}
Rusmirović, J., Ivanović, J., Pavlović, V. B., Rakić, V. M., Rančić, M. P., Đokić, V.,& Marinković, A. D.. (2017). Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. in Carbohydrate Polymers
Elsevier., 164, 64-74.
https://doi.org/10.1016/j.carbpol.2017.01.086
https://hdl.handle.net/21.15107/rcub_dais_2380
Rusmirović J, Ivanović J, Pavlović VB, Rakić VM, Rančić MP, Đokić V, Marinković AD. Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. in Carbohydrate Polymers. 2017;164:64-74.
doi:10.1016/j.carbpol.2017.01.086
https://hdl.handle.net/21.15107/rcub_dais_2380 .
Rusmirović, Jelena, Ivanović, Jasna, Pavlović, Vladimir B., Rakić, Vesna M., Rančić, Milica P., Đokić, Veljko, Marinković, Aleksandar D., "Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites" in Carbohydrate Polymers, 164 (2017):64-74,
https://doi.org/10.1016/j.carbpol.2017.01.086 .,
https://hdl.handle.net/21.15107/rcub_dais_2380 .
24
19
23