TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Corlett, Cole
AU  - Fahrenholtz, William G.
AU  - Rosenschon, Martin
AU  - Füglein, Ekkehard
AU  - Dojčilović, Radovan
AU  - Tošić, Dragana
AU  - Petrović, Jovana
AU  - Đorđević, Antonije
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/16516
AB  - Ceramic/polymer composites can be chemically stable, mechanically strong, and flexible, which make them candidates for electric devices, such as pressure or temperature sensors, energy storage or harvesting devices, actuators, and so forth. Depending on the application, various electrical properties are of importance. Polymers usually have low dielectric permittivity, but increased dielectric permittivity can be achieved by the addition of the ceramic fillers with high dielectric constant. With the aim to enhance dielectric properties of the composite without loss of flexibility, 5 wt% of BaTiO3-Fe2O3 powder was added into a polyvinylidene fluoride matrix. The powder was prepared by different synthesis conditions to produce core/shell structures. The effect of the phase composition and morphology of the BaTiO3-Fe2O3 core/shell filler on the structure and lattice dynamics of the polymer composites was investigated. Based on the results of the thermal analysis, various parameters of ceramic/polymer composites were determined. Differences in the phase composition and morphology of the filler have an influence on the formation of various polyvinylidene fluoride allomorphs and the degree of crystallinity. Furthermore, the dielectric performances of pure polyvinylidene fluoride and the polymer/ceramic composites were measured.
PB  - Wiley
T2  - Journal of Applied Polymer Science
T1  - Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite
SP  - e55040
VL  - 141
IS  - 10
DO  - 10.1002/app.55040
UR  - https://hdl.handle.net/21.15107/rcub_dais_16516
ER  - 

@article{
author = "Filipović, Suzana and Obradović, Nina and Corlett, Cole and Fahrenholtz, William G. and Rosenschon, Martin and Füglein, Ekkehard and Dojčilović, Radovan and Tošić, Dragana and Petrović, Jovana and Đorđević, Antonije and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2024",
abstract = "Ceramic/polymer composites can be chemically stable, mechanically strong, and flexible, which make them candidates for electric devices, such as pressure or temperature sensors, energy storage or harvesting devices, actuators, and so forth. Depending on the application, various electrical properties are of importance. Polymers usually have low dielectric permittivity, but increased dielectric permittivity can be achieved by the addition of the ceramic fillers with high dielectric constant. With the aim to enhance dielectric properties of the composite without loss of flexibility, 5 wt% of BaTiO3-Fe2O3 powder was added into a polyvinylidene fluoride matrix. The powder was prepared by different synthesis conditions to produce core/shell structures. The effect of the phase composition and morphology of the BaTiO3-Fe2O3 core/shell filler on the structure and lattice dynamics of the polymer composites was investigated. Based on the results of the thermal analysis, various parameters of ceramic/polymer composites were determined. Differences in the phase composition and morphology of the filler have an influence on the formation of various polyvinylidene fluoride allomorphs and the degree of crystallinity. Furthermore, the dielectric performances of pure polyvinylidene fluoride and the polymer/ceramic composites were measured.",
publisher = "Wiley",
journal = "Journal of Applied Polymer Science",
title = "Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite",
pages = "e55040",
volume = "141",
number = "10",
doi = "10.1002/app.55040",
url = "https://hdl.handle.net/21.15107/rcub_dais_16516"
}

Filipović, S., Obradović, N., Corlett, C., Fahrenholtz, W. G., Rosenschon, M., Füglein, E., Dojčilović, R., Tošić, D., Petrović, J., Đorđević, A., Vlahović, B.,& Pavlović, V. B.. (2024). Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite. in Journal of Applied Polymer Science
Wiley., 141(10), e55040.
https://doi.org/10.1002/app.55040
https://hdl.handle.net/21.15107/rcub_dais_16516

Filipović S, Obradović N, Corlett C, Fahrenholtz WG, Rosenschon M, Füglein E, Dojčilović R, Tošić D, Petrović J, Đorđević A, Vlahović B, Pavlović VB. Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite. in Journal of Applied Polymer Science. 2024;141(10):e55040.
doi:10.1002/app.55040
https://hdl.handle.net/21.15107/rcub_dais_16516 .

Filipović, Suzana, Obradović, Nina, Corlett, Cole, Fahrenholtz, William G., Rosenschon, Martin, Füglein, Ekkehard, Dojčilović, Radovan, Tošić, Dragana, Petrović, Jovana, Đorđević, Antonije, Vlahović, Branislav, Pavlović, Vladimir B., "Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite" in Journal of Applied Polymer Science, 141, no. 10 (2024):e55040,
https://doi.org/10.1002/app.55040 .,
https://hdl.handle.net/21.15107/rcub_dais_16516 .

TY  - JOUR
AU  - Atanasoski, Vladimir
AU  - Petrović, Jovana
AU  - Popović Maneski, Lana
AU  - Miletić, Marjan
AU  - Babić, Miloš
AU  - Nikolić, Aleksandra
AU  - Panescu, Dorin
AU  - Ivanović, Marija D.
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/16515
AB  - Goal: Clinical interpretation of an electrocardiogram (ECG) can be detrimentally affected by noise. Removal of the electromyographic (EMG) noise is particularly challenging due to its spectral overlap with the QRS complex. The existing EMG-denoising algorithms often distort signal morphology, thus obscuring diagnostically relevant information. Methods: Here, a new iterative regeneration method (IRM) for efficient EMG-noise suppression is proposed. The main hypothesis is that the temporary removal of the dominant ECG components enables extraction of the noise with the minimum alteration to the signal. The method is validated on SimEMG database of simultaneously recorded reference and noisy signals, MIT-BIH arrhythmia database and synthesized ECG signals, both with the noise from MIT Noise Stress Test Database. Results: IRM denoising and morphology-preserving performance is superior to the wavelet- and FIR-based benchmark methods. Conclusions : IRM is reliable, computationally non-intensive, fast and applicable to any number of ECG channels recorded by mobile or standard ECG devices.
PB  - Institute of Electrical and Electronics Engineers (IEEE)
T2  - IEEE Open Journal of Engineering in Medicine and Biology
T1  - A morphology-preserving algorithm for denoising of EMG-contaminated ECG signals
SP  - 1
EP  - 10
DO  - 10.1109/OJEMB.2024.3380352
UR  - https://hdl.handle.net/21.15107/rcub_dais_16515
ER  - 

@article{
author = "Atanasoski, Vladimir and Petrović, Jovana and Popović Maneski, Lana and Miletić, Marjan and Babić, Miloš and Nikolić, Aleksandra and Panescu, Dorin and Ivanović, Marija D.",
year = "2024",
abstract = "Goal: Clinical interpretation of an electrocardiogram (ECG) can be detrimentally affected by noise. Removal of the electromyographic (EMG) noise is particularly challenging due to its spectral overlap with the QRS complex. The existing EMG-denoising algorithms often distort signal morphology, thus obscuring diagnostically relevant information. Methods: Here, a new iterative regeneration method (IRM) for efficient EMG-noise suppression is proposed. The main hypothesis is that the temporary removal of the dominant ECG components enables extraction of the noise with the minimum alteration to the signal. The method is validated on SimEMG database of simultaneously recorded reference and noisy signals, MIT-BIH arrhythmia database and synthesized ECG signals, both with the noise from MIT Noise Stress Test Database. Results: IRM denoising and morphology-preserving performance is superior to the wavelet- and FIR-based benchmark methods. Conclusions : IRM is reliable, computationally non-intensive, fast and applicable to any number of ECG channels recorded by mobile or standard ECG devices.",
publisher = "Institute of Electrical and Electronics Engineers (IEEE)",
journal = "IEEE Open Journal of Engineering in Medicine and Biology",
title = "A morphology-preserving algorithm for denoising of EMG-contaminated ECG signals",
pages = "1-10",
doi = "10.1109/OJEMB.2024.3380352",
url = "https://hdl.handle.net/21.15107/rcub_dais_16515"
}

Atanasoski, V., Petrović, J., Popović Maneski, L., Miletić, M., Babić, M., Nikolić, A., Panescu, D.,& Ivanović, M. D.. (2024). A morphology-preserving algorithm for denoising of EMG-contaminated ECG signals. in IEEE Open Journal of Engineering in Medicine and Biology
Institute of Electrical and Electronics Engineers (IEEE)., 1-10.
https://doi.org/10.1109/OJEMB.2024.3380352
https://hdl.handle.net/21.15107/rcub_dais_16515

Atanasoski V, Petrović J, Popović Maneski L, Miletić M, Babić M, Nikolić A, Panescu D, Ivanović MD. A morphology-preserving algorithm for denoising of EMG-contaminated ECG signals. in IEEE Open Journal of Engineering in Medicine and Biology. 2024;:1-10.
doi:10.1109/OJEMB.2024.3380352
https://hdl.handle.net/21.15107/rcub_dais_16515 .

Atanasoski, Vladimir, Petrović, Jovana, Popović Maneski, Lana, Miletić, Marjan, Babić, Miloš, Nikolić, Aleksandra, Panescu, Dorin, Ivanović, Marija D., "A morphology-preserving algorithm for denoising of EMG-contaminated ECG signals" in IEEE Open Journal of Engineering in Medicine and Biology (2024):1-10,
https://doi.org/10.1109/OJEMB.2024.3380352 .,
https://hdl.handle.net/21.15107/rcub_dais_16515 .

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Corlett, Cole
AU  - Fahrenholtz, William G.
AU  - Rosenschon, Martin
AU  - Füglein, Ekkehard
AU  - Dojčilović, Radovan
AU  - Tošić, Dragana
AU  - Petrović, Jovana
AU  - Đorđević, Antonije
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/16243
AB  - Ceramic/polymer composites can be chemically stable, mechanically strong, and flexible, which make them candidates for electric devices, such as pressure or temperature sensors, energy storage or harvesting devices, actuators, and so forth. Depending on the application, various electrical properties are of importance. Polymers usually have low dielectric permittivity, but increased dielectric permittivity can be achieved by the addition of the ceramic fillers with high dielectric constant. With the aim to enhance dielectric properties of the composite without loss of flexibility, 5 wt% of BaTiO3-Fe2O3 powder was added into a polyvinylidene fluoride matrix. The powder was prepared by different synthesis conditions to produce core/shell structures. The effect of the phase composition and morphology of the BaTiO3-Fe2O3 core/shell filler on the structure and lattice dynamics of the polymer composites was investigated. Based on the results of the thermal analysis, various parameters of ceramic/polymer composites were determined. Differences in the phase composition and morphology of the filler have an influence on the formation of various polyvinylidene fluoride allomorphs and the degree of crystallinity. Furthermore, the dielectric performances of pure polyvinylidene fluoride and the polymer/ceramic composites were measured.
PB  - Wiley
T2  - Journal of Applied Polymer Science
T1  - Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite
SP  - e55040
VL  - 141
IS  - 10
DO  - 10.1002/app.55040
UR  - https://hdl.handle.net/21.15107/rcub_dais_16516
ER  - 

@article{
author = "Filipović, Suzana and Obradović, Nina and Corlett, Cole and Fahrenholtz, William G. and Rosenschon, Martin and Füglein, Ekkehard and Dojčilović, Radovan and Tošić, Dragana and Petrović, Jovana and Đorđević, Antonije and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2024",
abstract = "Ceramic/polymer composites can be chemically stable, mechanically strong, and flexible, which make them candidates for electric devices, such as pressure or temperature sensors, energy storage or harvesting devices, actuators, and so forth. Depending on the application, various electrical properties are of importance. Polymers usually have low dielectric permittivity, but increased dielectric permittivity can be achieved by the addition of the ceramic fillers with high dielectric constant. With the aim to enhance dielectric properties of the composite without loss of flexibility, 5 wt% of BaTiO3-Fe2O3 powder was added into a polyvinylidene fluoride matrix. The powder was prepared by different synthesis conditions to produce core/shell structures. The effect of the phase composition and morphology of the BaTiO3-Fe2O3 core/shell filler on the structure and lattice dynamics of the polymer composites was investigated. Based on the results of the thermal analysis, various parameters of ceramic/polymer composites were determined. Differences in the phase composition and morphology of the filler have an influence on the formation of various polyvinylidene fluoride allomorphs and the degree of crystallinity. Furthermore, the dielectric performances of pure polyvinylidene fluoride and the polymer/ceramic composites were measured.",
publisher = "Wiley",
journal = "Journal of Applied Polymer Science",
title = "Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite",
pages = "e55040",
volume = "141",
number = "10",
doi = "10.1002/app.55040",
url = "https://hdl.handle.net/21.15107/rcub_dais_16516"
}

Filipović, S., Obradović, N., Corlett, C., Fahrenholtz, W. G., Rosenschon, M., Füglein, E., Dojčilović, R., Tošić, D., Petrović, J., Đorđević, A., Vlahović, B.,& Pavlović, V. B.. (2024). Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite. in Journal of Applied Polymer Science
Wiley., 141(10), e55040.
https://doi.org/10.1002/app.55040
https://hdl.handle.net/21.15107/rcub_dais_16516

Filipović S, Obradović N, Corlett C, Fahrenholtz WG, Rosenschon M, Füglein E, Dojčilović R, Tošić D, Petrović J, Đorđević A, Vlahović B, Pavlović VB. Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite. in Journal of Applied Polymer Science. 2024;141(10):e55040.
doi:10.1002/app.55040
https://hdl.handle.net/21.15107/rcub_dais_16516 .

Filipović, Suzana, Obradović, Nina, Corlett, Cole, Fahrenholtz, William G., Rosenschon, Martin, Füglein, Ekkehard, Dojčilović, Radovan, Tošić, Dragana, Petrović, Jovana, Đorđević, Antonije, Vlahović, Branislav, Pavlović, Vladimir B., "Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite" in Journal of Applied Polymer Science, 141, no. 10 (2024):e55040,
https://doi.org/10.1002/app.55040 .,
https://hdl.handle.net/21.15107/rcub_dais_16516 .

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Fahrenholtz, William
AU  - Smith, Steven
AU  - Mirković, Miljana M.
AU  - Peleš Tadić, Adriana
AU  - Petrović, Jovana
AU  - Đorđević, Antonije
PY  - 2024
UR  - https://dais.sanu.ac.rs/123456789/16383
AB  - Magnesium titanate ceramics were prepared by reactive spark plasma sintering (SPS) at 1200 °C for 5 min. Prior to sintering, MgO and TiO2 powders were mixed by high energy ball milling (HEBM) for 15, 30, or 60 min. The effect of milling time on phase composition was analyzed by X-ray diffraction (XRD) for milled powders and sintered specimens. The morphology of the sintered ceramics was investigated by scanning electron microscopy (SEM), while elemental distribution was determined by energy dispersive spectroscopy (EDS). The presence of the MgTi2O5 phase was detected in XRD and was confirmed by EDS analysis. Microcracking was observed for specimens prepared with longer milling times and attributed to the coefficient of thermal expansion (CTE) mismatch dominantly due to the anisotropic crystal structure of MgTiO3 phase. The sample milled for 15 min showed the highest Vickers hardness due to less or no microcracking and nearly full density. The dielectric measurements in the range of 10 Hz–250 MHz demonstrated extremely high dielectric permittivity, as high as 104 at 1 kHz. An increase in loss tangents was observed due to oxygen vacancy formation, which was promoted by the vacuum environment during SPS. Oxygen vacancy-related dielectric relaxation was also detected and explained.
T2  - Ceramics International
T1  - Spark plasma sintering of magnesium titanate ceramics
DO  - 10.1016/j.ceramint.2024.02.004
UR  - https://hdl.handle.net/21.15107/rcub_dais_16383
ER  - 

@article{
author = "Filipović, Suzana and Obradović, Nina and Fahrenholtz, William and Smith, Steven and Mirković, Miljana M. and Peleš Tadić, Adriana and Petrović, Jovana and Đorđević, Antonije",
year = "2024",
abstract = "Magnesium titanate ceramics were prepared by reactive spark plasma sintering (SPS) at 1200 °C for 5 min. Prior to sintering, MgO and TiO2 powders were mixed by high energy ball milling (HEBM) for 15, 30, or 60 min. The effect of milling time on phase composition was analyzed by X-ray diffraction (XRD) for milled powders and sintered specimens. The morphology of the sintered ceramics was investigated by scanning electron microscopy (SEM), while elemental distribution was determined by energy dispersive spectroscopy (EDS). The presence of the MgTi2O5 phase was detected in XRD and was confirmed by EDS analysis. Microcracking was observed for specimens prepared with longer milling times and attributed to the coefficient of thermal expansion (CTE) mismatch dominantly due to the anisotropic crystal structure of MgTiO3 phase. The sample milled for 15 min showed the highest Vickers hardness due to less or no microcracking and nearly full density. The dielectric measurements in the range of 10 Hz–250 MHz demonstrated extremely high dielectric permittivity, as high as 104 at 1 kHz. An increase in loss tangents was observed due to oxygen vacancy formation, which was promoted by the vacuum environment during SPS. Oxygen vacancy-related dielectric relaxation was also detected and explained.",
journal = "Ceramics International",
title = "Spark plasma sintering of magnesium titanate ceramics",
doi = "10.1016/j.ceramint.2024.02.004",
url = "https://hdl.handle.net/21.15107/rcub_dais_16383"
}

Filipović, S., Obradović, N., Fahrenholtz, W., Smith, S., Mirković, M. M., Peleš Tadić, A., Petrović, J.,& Đorđević, A.. (2024). Spark plasma sintering of magnesium titanate ceramics. in Ceramics International.
https://doi.org/10.1016/j.ceramint.2024.02.004
https://hdl.handle.net/21.15107/rcub_dais_16383

Filipović S, Obradović N, Fahrenholtz W, Smith S, Mirković MM, Peleš Tadić A, Petrović J, Đorđević A. Spark plasma sintering of magnesium titanate ceramics. in Ceramics International. 2024;.
doi:10.1016/j.ceramint.2024.02.004
https://hdl.handle.net/21.15107/rcub_dais_16383 .

Filipović, Suzana, Obradović, Nina, Fahrenholtz, William, Smith, Steven, Mirković, Miljana M., Peleš Tadić, Adriana, Petrović, Jovana, Đorđević, Antonije, "Spark plasma sintering of magnesium titanate ceramics" in Ceramics International (2024),
https://doi.org/10.1016/j.ceramint.2024.02.004 .,
https://hdl.handle.net/21.15107/rcub_dais_16383 .

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Anđelković, Ljubica
AU  - Olćan, Dragan
AU  - Petrović, Jovana
AU  - Mirković, Miljana
AU  - Pavlović, Vladimir B.
AU  - Jeremić, Dejan
AU  - Vlahović, Branislav
AU  - Đorđević, Antonije
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11230
AB  - Solid-state reaction between BaTiO3 and Fe2O3 was used to produce a multiferroic heterostructure composite. Commercial BaTiO3 and Fe(NO3)3•9H2O were suspended in ethanol for 30 minutes in an ultrasound bath. The prepared mixture was thermally processed at 300 oC for 6 h. Sintering at 1300 oC for 1 h resulted in a mixture of different phases, BaTiO3, BaFe12O19 and Ba12Ti28Fe15O84, which were confirmed by x-ray powder diffraction. A dense microstructure with a small volume fraction of closed porosity was indicated by the scanning electron microscopy, while a homogeneous distribution of Fe ions over BaTiO3 phase was visible from energy dispersive spectroscopy mapping. Doping of BaTiO3 with Fe2O3 resulted in formation of magnetic hexaferrite phases, as confirmed by dielectric measurements that showed a broadened maximum of the permittivity measured as a function of temperature.
PB  - Belgrade : International Institute for the Science of Sintering
T2  - Science of Sintering
T1  - Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction
SP  - 1
EP  - 8
VL  - 53
DO  - 10.2298/SOS2101001F
UR  - https://hdl.handle.net/21.15107/rcub_dais_11230
ER  - 

@article{
author = "Filipović, Suzana and Obradović, Nina and Anđelković, Ljubica and Olćan, Dragan and Petrović, Jovana and Mirković, Miljana and Pavlović, Vladimir B. and Jeremić, Dejan and Vlahović, Branislav and Đorđević, Antonije",
year = "2021",
abstract = "Solid-state reaction between BaTiO3 and Fe2O3 was used to produce a multiferroic heterostructure composite. Commercial BaTiO3 and Fe(NO3)3•9H2O were suspended in ethanol for 30 minutes in an ultrasound bath. The prepared mixture was thermally processed at 300 oC for 6 h. Sintering at 1300 oC for 1 h resulted in a mixture of different phases, BaTiO3, BaFe12O19 and Ba12Ti28Fe15O84, which were confirmed by x-ray powder diffraction. A dense microstructure with a small volume fraction of closed porosity was indicated by the scanning electron microscopy, while a homogeneous distribution of Fe ions over BaTiO3 phase was visible from energy dispersive spectroscopy mapping. Doping of BaTiO3 with Fe2O3 resulted in formation of magnetic hexaferrite phases, as confirmed by dielectric measurements that showed a broadened maximum of the permittivity measured as a function of temperature.",
publisher = "Belgrade : International Institute for the Science of Sintering",
journal = "Science of Sintering",
title = "Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction",
pages = "1-8",
volume = "53",
doi = "10.2298/SOS2101001F",
url = "https://hdl.handle.net/21.15107/rcub_dais_11230"
}

Filipović, S., Obradović, N., Anđelković, L., Olćan, D., Petrović, J., Mirković, M., Pavlović, V. B., Jeremić, D., Vlahović, B.,& Đorđević, A.. (2021). Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction. in Science of Sintering
Belgrade : International Institute for the Science of Sintering., 53, 1-8.
https://doi.org/10.2298/SOS2101001F
https://hdl.handle.net/21.15107/rcub_dais_11230

Filipović S, Obradović N, Anđelković L, Olćan D, Petrović J, Mirković M, Pavlović VB, Jeremić D, Vlahović B, Đorđević A. Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction. in Science of Sintering. 2021;53:1-8.
doi:10.2298/SOS2101001F
https://hdl.handle.net/21.15107/rcub_dais_11230 .

Filipović, Suzana, Obradović, Nina, Anđelković, Ljubica, Olćan, Dragan, Petrović, Jovana, Mirković, Miljana, Pavlović, Vladimir B., Jeremić, Dejan, Vlahović, Branislav, Đorđević, Antonije, "Multiferroic Heterostructure BaTiO3/ε-Fe2O3 Composite Obtained by in situ Reaction" in Science of Sintering, 53 (2021):1-8,
https://doi.org/10.2298/SOS2101001F .,
https://hdl.handle.net/21.15107/rcub_dais_11230 .

TY  - JOUR
AU  - Đorđević, Antonije
AU  - Olćan, Dragan
AU  - Petrović, Jovana
AU  - Obradović, Nina
AU  - Filipović, Suzana
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12341
AB  - We have developed rotationally symmetrical coaxial chambers for measurements of dielectric parameters of disk-shaped samples, in the frequency range from 1 MHz to several hundred MHz. The reflection coefficient of the chamber is measured and the dielectric parameters are hence extracted utilizing a high-accuracy quasistatic numerical model of the chamber and the sample. We present this model, which is based on the method-of-moments solution of a set of integral equations for composite metallic and dielectric bodies. The equations are tailored to bodies of revolution. The model is efficient and accurate so that the major contribution of the measurement uncertainty comes from the measurement hardware.
PB  - National Library of Serbia
T2  - Facta universitatis - series: Electronics and Energetics
T1  - High-accuracy quasistatic numerical model for bodies of revolution tailored for RF measurements of dielectric parameters
SP  - 141
EP  - 156
VL  - 34
IS  - 1
DO  - 10.2298/FUEE2101141D
UR  - https://hdl.handle.net/21.15107/rcub_dais_12341
ER  - 

@article{
author = "Đorđević, Antonije and Olćan, Dragan and Petrović, Jovana and Obradović, Nina and Filipović, Suzana",
year = "2021",
abstract = "We have developed rotationally symmetrical coaxial chambers for measurements of dielectric parameters of disk-shaped samples, in the frequency range from 1 MHz to several hundred MHz. The reflection coefficient of the chamber is measured and the dielectric parameters are hence extracted utilizing a high-accuracy quasistatic numerical model of the chamber and the sample. We present this model, which is based on the method-of-moments solution of a set of integral equations for composite metallic and dielectric bodies. The equations are tailored to bodies of revolution. The model is efficient and accurate so that the major contribution of the measurement uncertainty comes from the measurement hardware.",
publisher = "National Library of Serbia",
journal = "Facta universitatis - series: Electronics and Energetics",
title = "High-accuracy quasistatic numerical model for bodies of revolution tailored for RF measurements of dielectric parameters",
pages = "141-156",
volume = "34",
number = "1",
doi = "10.2298/FUEE2101141D",
url = "https://hdl.handle.net/21.15107/rcub_dais_12341"
}

Đorđević, A., Olćan, D., Petrović, J., Obradović, N.,& Filipović, S.. (2021). High-accuracy quasistatic numerical model for bodies of revolution tailored for RF measurements of dielectric parameters. in Facta universitatis - series: Electronics and Energetics
National Library of Serbia., 34(1), 141-156.
https://doi.org/10.2298/FUEE2101141D
https://hdl.handle.net/21.15107/rcub_dais_12341

Đorđević A, Olćan D, Petrović J, Obradović N, Filipović S. High-accuracy quasistatic numerical model for bodies of revolution tailored for RF measurements of dielectric parameters. in Facta universitatis - series: Electronics and Energetics. 2021;34(1):141-156.
doi:10.2298/FUEE2101141D
https://hdl.handle.net/21.15107/rcub_dais_12341 .

Đorđević, Antonije, Olćan, Dragan, Petrović, Jovana, Obradović, Nina, Filipović, Suzana, "High-accuracy quasistatic numerical model for bodies of revolution tailored for RF measurements of dielectric parameters" in Facta universitatis - series: Electronics and Energetics, 34, no. 1 (2021):141-156,
https://doi.org/10.2298/FUEE2101141D .,
https://hdl.handle.net/21.15107/rcub_dais_12341 .