Krstić, Jugoslav B.

Link to this page

Authority KeyName Variants
15a05f23-6582-4db2-949d-581af9c578a1
  • Krstić, Jugoslav B. (6)

Author's Bibliography

Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing

Dojčinović, Milena P.; Vasiljević, Zorka Ž.; Krstić, Jugoslav B.; Vujančević, Jelena D.; Marković, Smilja; Tadić, Nenad B.; Nikolic, Maria Vesna

(Basel : MDPI AG, 2021)

TY  - JOUR
AU  - Dojčinović, Milena P.
AU  - Vasiljević, Zorka Ž.
AU  - Krstić, Jugoslav B.
AU  - Vujančević, Jelena D.
AU  - Marković, Smilja
AU  - Tadić, Nenad B.
AU  - Nikolic, Maria Vesna
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11797
AB  - Nickel manganite nanocrystalline fibers were obtained by electrospinning and subsequent calcination at 400 °C. As-spun fibers were characterized by TG/DTA, Scanning Electron Microscopy and FT-IR spectroscopy analysis. X-ray diffraction and FT-IR spectroscopy analysis confirmed the formation of nickel manganite with a cubic spinel structure, while N2 physisorption at 77 K enabled determination of the BET specific surface area as 25.3 m2/g and (BJH) mesopore volume as 21.5 m2/g. The material constant (B) of the nanocrystalline nickel manganite fibers applied by drop-casting on test interdigitated electrodes on alumina substrate, dried at room temperature, was determined as 4379 K in the 20–50 °C temperature range and a temperature sensitivity of −4.95%/K at room temperature (25 °C). The change of impedance with relative humidity was monitored at 25 and 50 °C for a relative humidity (RH) change of 40 to 90% in the 42 Hzπ1 MHz frequency range. At 100 Hz and 25 °C, the sensitivity of 327.36 ± 80.12 kΩ/%RH was determined, showing that nickel manganite obtained by electrospinning has potential as a multifunctional material for combined humidity and temperature sensing.
PB  - Basel : MDPI AG
T2  - Sensors
T1  - Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing
SP  - 4357
VL  - 21
IS  - 13
DO  - 10.3390/s21134357
UR  - https://hdl.handle.net/21.15107/rcub_dais_11797
ER  - 
@article{
author = "Dojčinović, Milena P. and Vasiljević, Zorka Ž. and Krstić, Jugoslav B. and Vujančević, Jelena D. and Marković, Smilja and Tadić, Nenad B. and Nikolic, Maria Vesna",
year = "2021",
abstract = "Nickel manganite nanocrystalline fibers were obtained by electrospinning and subsequent calcination at 400 °C. As-spun fibers were characterized by TG/DTA, Scanning Electron Microscopy and FT-IR spectroscopy analysis. X-ray diffraction and FT-IR spectroscopy analysis confirmed the formation of nickel manganite with a cubic spinel structure, while N2 physisorption at 77 K enabled determination of the BET specific surface area as 25.3 m2/g and (BJH) mesopore volume as 21.5 m2/g. The material constant (B) of the nanocrystalline nickel manganite fibers applied by drop-casting on test interdigitated electrodes on alumina substrate, dried at room temperature, was determined as 4379 K in the 20–50 °C temperature range and a temperature sensitivity of −4.95%/K at room temperature (25 °C). The change of impedance with relative humidity was monitored at 25 and 50 °C for a relative humidity (RH) change of 40 to 90% in the 42 Hzπ1 MHz frequency range. At 100 Hz and 25 °C, the sensitivity of 327.36 ± 80.12 kΩ/%RH was determined, showing that nickel manganite obtained by electrospinning has potential as a multifunctional material for combined humidity and temperature sensing.",
publisher = "Basel : MDPI AG",
journal = "Sensors",
title = "Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing",
pages = "4357",
volume = "21",
number = "13",
doi = "10.3390/s21134357",
url = "https://hdl.handle.net/21.15107/rcub_dais_11797"
}
Dojčinović, M. P., Vasiljević, Z. Ž., Krstić, J. B., Vujančević, J. D., Marković, S., Tadić, N. B.,& Nikolic, M. V.. (2021). Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing. in Sensors
Basel : MDPI AG., 21(13), 4357.
https://doi.org/10.3390/s21134357
https://hdl.handle.net/21.15107/rcub_dais_11797
Dojčinović MP, Vasiljević ZŽ, Krstić JB, Vujančević JD, Marković S, Tadić NB, Nikolic MV. Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing. in Sensors. 2021;21(13):4357.
doi:10.3390/s21134357
https://hdl.handle.net/21.15107/rcub_dais_11797 .
Dojčinović, Milena P., Vasiljević, Zorka Ž., Krstić, Jugoslav B., Vujančević, Jelena D., Marković, Smilja, Tadić, Nenad B., Nikolic, Maria Vesna, "Electrospun Nickel Manganite (NiMn2O4) Nanocrystalline Fibers for Humidity and Temperature Sensing" in Sensors, 21, no. 13 (2021):4357,
https://doi.org/10.3390/s21134357 .,
https://hdl.handle.net/21.15107/rcub_dais_11797 .
1
1

Valorization of walnut shell ash as a catalyst for biodiesel production

Miladinović, Marija R.; Zdujić, Miodrag; Veljović, Đorđe; Krstić, Jugoslav B.; Banković Ilić, Ivana B.; Veljković, Vlada B.; Stamenković, Olivera S.

(Elsevier, 2020)

TY  - JOUR
AU  - Miladinović, Marija R.
AU  - Zdujić, Miodrag
AU  - Veljović, Đorđe
AU  - Krstić, Jugoslav B.
AU  - Banković Ilić, Ivana B.
AU  - Veljković, Vlada B.
AU  - Stamenković, Olivera S.
PY  - 2020
UR  - http://dais.sanu.ac.rs/123456789/6903
AB  - The catalytic activity of the walnut shell ash was investigated in the biodiesel production by the sunflower oil methanolysis. The catalyst was characterized by the TG-DTA, XRD, Hg porosimetry, N2 physisorption, SEM, and Hammett method. In addition, the effects of the catalyst loading and the methanol-to-oil molar ratio on the methyl esters synthesis were tested at the reaction temperature of 60 °C. The walnut shell ash provided a very fast reaction and a high FAME content (over 98%). As the reaction occurred in the absence of triacylglycerols mass transfer limitation, the pseudo-first-order model was employed for describing the kinetics of the reaction. The catalyst was successfully reused four times after the regeneration of the catalytic activity by recalcination at 800 °C.
PB  - Elsevier
T2  - Renewable Energy
T1  - Valorization of walnut shell ash as a catalyst for biodiesel production
SP  - 1033
EP  - 1043
VL  - 147
DO  - 10.1016/j.renene.2019.09.056
UR  - https://hdl.handle.net/21.15107/rcub_dais_6903
ER  - 
@article{
author = "Miladinović, Marija R. and Zdujić, Miodrag and Veljović, Đorđe and Krstić, Jugoslav B. and Banković Ilić, Ivana B. and Veljković, Vlada B. and Stamenković, Olivera S.",
year = "2020",
abstract = "The catalytic activity of the walnut shell ash was investigated in the biodiesel production by the sunflower oil methanolysis. The catalyst was characterized by the TG-DTA, XRD, Hg porosimetry, N2 physisorption, SEM, and Hammett method. In addition, the effects of the catalyst loading and the methanol-to-oil molar ratio on the methyl esters synthesis were tested at the reaction temperature of 60 °C. The walnut shell ash provided a very fast reaction and a high FAME content (over 98%). As the reaction occurred in the absence of triacylglycerols mass transfer limitation, the pseudo-first-order model was employed for describing the kinetics of the reaction. The catalyst was successfully reused four times after the regeneration of the catalytic activity by recalcination at 800 °C.",
publisher = "Elsevier",
journal = "Renewable Energy",
title = "Valorization of walnut shell ash as a catalyst for biodiesel production",
pages = "1033-1043",
volume = "147",
doi = "10.1016/j.renene.2019.09.056",
url = "https://hdl.handle.net/21.15107/rcub_dais_6903"
}
Miladinović, M. R., Zdujić, M., Veljović, Đ., Krstić, J. B., Banković Ilić, I. B., Veljković, V. B.,& Stamenković, O. S.. (2020). Valorization of walnut shell ash as a catalyst for biodiesel production. in Renewable Energy
Elsevier., 147, 1033-1043.
https://doi.org/10.1016/j.renene.2019.09.056
https://hdl.handle.net/21.15107/rcub_dais_6903
Miladinović MR, Zdujić M, Veljović Đ, Krstić JB, Banković Ilić IB, Veljković VB, Stamenković OS. Valorization of walnut shell ash as a catalyst for biodiesel production. in Renewable Energy. 2020;147:1033-1043.
doi:10.1016/j.renene.2019.09.056
https://hdl.handle.net/21.15107/rcub_dais_6903 .
Miladinović, Marija R., Zdujić, Miodrag, Veljović, Đorđe, Krstić, Jugoslav B., Banković Ilić, Ivana B., Veljković, Vlada B., Stamenković, Olivera S., "Valorization of walnut shell ash as a catalyst for biodiesel production" in Renewable Energy, 147 (2020):1033-1043,
https://doi.org/10.1016/j.renene.2019.09.056 .,
https://hdl.handle.net/21.15107/rcub_dais_6903 .
23
22
28

Valorization of walnut shell ash as a catalyst for biodiesel production

Miladinović, Marija R.; Zdujić, Miodrag; Veljović, Đorđe; Krstić, Jugoslav B.; Banković Ilić, Ivana B.; Veljković, Vlada B.; Stamenković, Olivera S.

(Elsevier, 2020)

TY  - JOUR
AU  - Miladinović, Marija R.
AU  - Zdujić, Miodrag
AU  - Veljović, Đorđe
AU  - Krstić, Jugoslav B.
AU  - Banković Ilić, Ivana B.
AU  - Veljković, Vlada B.
AU  - Stamenković, Olivera S.
PY  - 2020
UR  - http://cer.ihtm.bg.ac.rs/handle/123456789/3217
UR  - http://dais.sanu.ac.rs/123456789/6717
AB  - The catalytic activity of the walnut shell ash was investigated in the biodiesel production by the sunflower oil methanolysis. The catalyst was characterized by the TG-DTA, XRD, Hg porosimetry, N2 physisorption, SEM, and Hammett method. In addition, the effects of the catalyst loading and the methanol-to-oil molar ratio on the methyl esters synthesis were tested at the reaction temperature of 60 °C. The walnut shell ash provided a very fast reaction and a high FAME content (over 98%). As the reaction occurred in the absence of triacylglycerols mass transfer limitation, the pseudo-first-order model was employed for describing the kinetics of the reaction. The catalyst was successfully reused four times after the regeneration of the catalytic activity by recalcination at 800 °C.
PB  - Elsevier
T2  - Renewable Energy
T1  - Valorization of walnut shell ash as a catalyst for biodiesel production
SP  - 1033
EP  - 1043
VL  - 147
DO  - 10.1016/j.renene.2019.09.056
UR  - https://hdl.handle.net/21.15107/rcub_dais_6717
ER  - 
@article{
author = "Miladinović, Marija R. and Zdujić, Miodrag and Veljović, Đorđe and Krstić, Jugoslav B. and Banković Ilić, Ivana B. and Veljković, Vlada B. and Stamenković, Olivera S.",
year = "2020",
abstract = "The catalytic activity of the walnut shell ash was investigated in the biodiesel production by the sunflower oil methanolysis. The catalyst was characterized by the TG-DTA, XRD, Hg porosimetry, N2 physisorption, SEM, and Hammett method. In addition, the effects of the catalyst loading and the methanol-to-oil molar ratio on the methyl esters synthesis were tested at the reaction temperature of 60 °C. The walnut shell ash provided a very fast reaction and a high FAME content (over 98%). As the reaction occurred in the absence of triacylglycerols mass transfer limitation, the pseudo-first-order model was employed for describing the kinetics of the reaction. The catalyst was successfully reused four times after the regeneration of the catalytic activity by recalcination at 800 °C.",
publisher = "Elsevier",
journal = "Renewable Energy",
title = "Valorization of walnut shell ash as a catalyst for biodiesel production",
pages = "1033-1043",
volume = "147",
doi = "10.1016/j.renene.2019.09.056",
url = "https://hdl.handle.net/21.15107/rcub_dais_6717"
}
Miladinović, M. R., Zdujić, M., Veljović, Đ., Krstić, J. B., Banković Ilić, I. B., Veljković, V. B.,& Stamenković, O. S.. (2020). Valorization of walnut shell ash as a catalyst for biodiesel production. in Renewable Energy
Elsevier., 147, 1033-1043.
https://doi.org/10.1016/j.renene.2019.09.056
https://hdl.handle.net/21.15107/rcub_dais_6717
Miladinović MR, Zdujić M, Veljović Đ, Krstić JB, Banković Ilić IB, Veljković VB, Stamenković OS. Valorization of walnut shell ash as a catalyst for biodiesel production. in Renewable Energy. 2020;147:1033-1043.
doi:10.1016/j.renene.2019.09.056
https://hdl.handle.net/21.15107/rcub_dais_6717 .
Miladinović, Marija R., Zdujić, Miodrag, Veljović, Đorđe, Krstić, Jugoslav B., Banković Ilić, Ivana B., Veljković, Vlada B., Stamenković, Olivera S., "Valorization of walnut shell ash as a catalyst for biodiesel production" in Renewable Energy, 147 (2020):1033-1043,
https://doi.org/10.1016/j.renene.2019.09.056 .,
https://hdl.handle.net/21.15107/rcub_dais_6717 .
23
22
28

Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis

Vasiljević, Zorka Ž.; Dojčinović, Milena; Krstić, Jugoslav B.; Ribić, Vesna; Tadić, Nenad B.; Ognjanović, Miloš; Auger, Sandrine; Vidić, Jasmina; Nikolić, Maria Vesna

(Royal Society of Chemistry, 2020)

TY  - JOUR
AU  - Vasiljević, Zorka Ž.
AU  - Dojčinović, Milena
AU  - Krstić, Jugoslav B.
AU  - Ribić, Vesna
AU  - Tadić, Nenad B.
AU  - Ognjanović, Miloš
AU  - Auger, Sandrine
AU  - Vidić, Jasmina
AU  - Nikolić, Maria Vesna
PY  - 2020
UR  - http://dais.sanu.ac.rs/123456789/7780
AB  - Nanocrystalline iron manganite powder was synthesized using the sol–gel combustion process, with glycine as fuel. It was further calcined at 900 °C for 8 h, resulting in the formation of a loose cubic FeMnO3 powder with a small specific surface area, net-like structure and plate-like particles as confirmed by XRD, N2 physisorption, FESEM and TEM analyses. The metal ion release was studied by ICP-OES and showed that less than 10 ppb of Fe or Mn ions were released by leaching in water, but 0.36 ppm Fe and 3.69 ppm Mn was found in LB (Luria–Bertani) bacterial medium. The generation of reactive oxygen species (ROS) was monitored in distilled water and bacterial medium and showed that FeMnO3 particles do not generate O2˙− ions with or without UV irradiation, but synthesize H2O2 and show an antioxidative effect. Besides the higher stability of FeMnO3 particles in aqueous solution they showed an inhibitory effect on Bacillus subtilis growth in LB medium even at low concentrations (0.01 mg ml−1), but not in BHI medium even at 1 mg ml−1. This study points out that the mechanism of antibacterial action of engineered metal oxides needs continued investigation and specific experimental controls.
PB  - Royal Society of Chemistry
T2  - RSC Advances
T1  - Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis
SP  - 13879
EP  - 13888
VL  - 10
IS  - 23
DO  - 10.1039/D0RA01809K
UR  - https://hdl.handle.net/21.15107/rcub_dais_7780
ER  - 
@article{
author = "Vasiljević, Zorka Ž. and Dojčinović, Milena and Krstić, Jugoslav B. and Ribić, Vesna and Tadić, Nenad B. and Ognjanović, Miloš and Auger, Sandrine and Vidić, Jasmina and Nikolić, Maria Vesna",
year = "2020",
abstract = "Nanocrystalline iron manganite powder was synthesized using the sol–gel combustion process, with glycine as fuel. It was further calcined at 900 °C for 8 h, resulting in the formation of a loose cubic FeMnO3 powder with a small specific surface area, net-like structure and plate-like particles as confirmed by XRD, N2 physisorption, FESEM and TEM analyses. The metal ion release was studied by ICP-OES and showed that less than 10 ppb of Fe or Mn ions were released by leaching in water, but 0.36 ppm Fe and 3.69 ppm Mn was found in LB (Luria–Bertani) bacterial medium. The generation of reactive oxygen species (ROS) was monitored in distilled water and bacterial medium and showed that FeMnO3 particles do not generate O2˙− ions with or without UV irradiation, but synthesize H2O2 and show an antioxidative effect. Besides the higher stability of FeMnO3 particles in aqueous solution they showed an inhibitory effect on Bacillus subtilis growth in LB medium even at low concentrations (0.01 mg ml−1), but not in BHI medium even at 1 mg ml−1. This study points out that the mechanism of antibacterial action of engineered metal oxides needs continued investigation and specific experimental controls.",
publisher = "Royal Society of Chemistry",
journal = "RSC Advances",
title = "Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis",
pages = "13879-13888",
volume = "10",
number = "23",
doi = "10.1039/D0RA01809K",
url = "https://hdl.handle.net/21.15107/rcub_dais_7780"
}
Vasiljević, Z. Ž., Dojčinović, M., Krstić, J. B., Ribić, V., Tadić, N. B., Ognjanović, M., Auger, S., Vidić, J.,& Nikolić, M. V.. (2020). Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis. in RSC Advances
Royal Society of Chemistry., 10(23), 13879-13888.
https://doi.org/10.1039/D0RA01809K
https://hdl.handle.net/21.15107/rcub_dais_7780
Vasiljević ZŽ, Dojčinović M, Krstić JB, Ribić V, Tadić NB, Ognjanović M, Auger S, Vidić J, Nikolić MV. Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis. in RSC Advances. 2020;10(23):13879-13888.
doi:10.1039/D0RA01809K
https://hdl.handle.net/21.15107/rcub_dais_7780 .
Vasiljević, Zorka Ž., Dojčinović, Milena, Krstić, Jugoslav B., Ribić, Vesna, Tadić, Nenad B., Ognjanović, Miloš, Auger, Sandrine, Vidić, Jasmina, Nikolić, Maria Vesna, "Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis" in RSC Advances, 10, no. 23 (2020):13879-13888,
https://doi.org/10.1039/D0RA01809K .,
https://hdl.handle.net/21.15107/rcub_dais_7780 .
7
5
7

Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing

Nikolić, Maria Vesna; Vasiljević, Zorka Ž.; Luković, Miloljub D.; Pavlović, Vera P.; Krstić, Jugoslav B.; Vujančević, Jelena; Tadić, Nenad B.; Vlahović, Branislav; Pavlović, Vladimir B.

(John Wiley & Sons, Inc., 2019)

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Vasiljević, Zorka Ž.
AU  - Luković, Miloljub D.
AU  - Pavlović, Vera P.
AU  - Krstić, Jugoslav B.
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/ijac.13190
UR  - http://dais.sanu.ac.rs/123456789/4848
AB  - Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.
PB  - John Wiley & Sons, Inc.
T2  - International Journal of Applied Ceramic Technology
T1  - Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing
SP  - 981
EP  - 993
VL  - 16
IS  - 3
DO  - 10.1111/ijac.13190
UR  - https://hdl.handle.net/21.15107/rcub_dais_4848
ER  - 
@article{
author = "Nikolić, Maria Vesna and Vasiljević, Zorka Ž. and Luković, Miloljub D. and Pavlović, Vera P. and Krstić, Jugoslav B. and Vujančević, Jelena and Tadić, Nenad B. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.",
publisher = "John Wiley & Sons, Inc.",
journal = "International Journal of Applied Ceramic Technology",
title = "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing",
pages = "981-993",
volume = "16",
number = "3",
doi = "10.1111/ijac.13190",
url = "https://hdl.handle.net/21.15107/rcub_dais_4848"
}
Nikolić, M. V., Vasiljević, Z. Ž., Luković, M. D., Pavlović, V. P., Krstić, J. B., Vujančević, J., Tadić, N. B., Vlahović, B.,& Pavlović, V. B.. (2019). Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing. in International Journal of Applied Ceramic Technology
John Wiley & Sons, Inc.., 16(3), 981-993.
https://doi.org/10.1111/ijac.13190
https://hdl.handle.net/21.15107/rcub_dais_4848
Nikolić MV, Vasiljević ZŽ, Luković MD, Pavlović VP, Krstić JB, Vujančević J, Tadić NB, Vlahović B, Pavlović VB. Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing. in International Journal of Applied Ceramic Technology. 2019;16(3):981-993.
doi:10.1111/ijac.13190
https://hdl.handle.net/21.15107/rcub_dais_4848 .
Nikolić, Maria Vesna, Vasiljević, Zorka Ž., Luković, Miloljub D., Pavlović, Vera P., Krstić, Jugoslav B., Vujančević, Jelena, Tadić, Nenad B., Vlahović, Branislav, Pavlović, Vladimir B., "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing" in International Journal of Applied Ceramic Technology, 16, no. 3 (2019):981-993,
https://doi.org/10.1111/ijac.13190 .,
https://hdl.handle.net/21.15107/rcub_dais_4848 .
13
12
12

Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing

Nikolić, Maria Vesna; Vasiljević, Zorka Ž.; Luković, Miloljub D.; Pavlović, Vera P.; Krstić, Jugoslav B.; Vujančević, Jelena; Tadić, Nenad B.; Vlahović, Branislav; Pavlović, Vladimir B.

(John Wiley & Sons, Inc., 2019)

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Vasiljević, Zorka Ž.
AU  - Luković, Miloljub D.
AU  - Pavlović, Vera P.
AU  - Krstić, Jugoslav B.
AU  - Vujančević, Jelena
AU  - Tadić, Nenad B.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/ijac.13190
UR  - http://dais.sanu.ac.rs/123456789/5766
AB  - Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.
PB  - John Wiley & Sons, Inc.
T2  - International Journal of Applied Ceramic Technology
T1  - Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing
SP  - 981
EP  - 993
VL  - 16
IS  - 3
DO  - 10.1111/ijac.13190
UR  - https://hdl.handle.net/21.15107/rcub_dais_5766
ER  - 
@article{
author = "Nikolić, Maria Vesna and Vasiljević, Zorka Ž. and Luković, Miloljub D. and Pavlović, Vera P. and Krstić, Jugoslav B. and Vujančević, Jelena and Tadić, Nenad B. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.",
publisher = "John Wiley & Sons, Inc.",
journal = "International Journal of Applied Ceramic Technology",
title = "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing",
pages = "981-993",
volume = "16",
number = "3",
doi = "10.1111/ijac.13190",
url = "https://hdl.handle.net/21.15107/rcub_dais_5766"
}
Nikolić, M. V., Vasiljević, Z. Ž., Luković, M. D., Pavlović, V. P., Krstić, J. B., Vujančević, J., Tadić, N. B., Vlahović, B.,& Pavlović, V. B.. (2019). Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing. in International Journal of Applied Ceramic Technology
John Wiley & Sons, Inc.., 16(3), 981-993.
https://doi.org/10.1111/ijac.13190
https://hdl.handle.net/21.15107/rcub_dais_5766
Nikolić MV, Vasiljević ZŽ, Luković MD, Pavlović VP, Krstić JB, Vujančević J, Tadić NB, Vlahović B, Pavlović VB. Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing. in International Journal of Applied Ceramic Technology. 2019;16(3):981-993.
doi:10.1111/ijac.13190
https://hdl.handle.net/21.15107/rcub_dais_5766 .
Nikolić, Maria Vesna, Vasiljević, Zorka Ž., Luković, Miloljub D., Pavlović, Vera P., Krstić, Jugoslav B., Vujančević, Jelena, Tadić, Nenad B., Vlahović, Branislav, Pavlović, Vladimir B., "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing" in International Journal of Applied Ceramic Technology, 16, no. 3 (2019):981-993,
https://doi.org/10.1111/ijac.13190 .,
https://hdl.handle.net/21.15107/rcub_dais_5766 .
13
12
12