Rusmirović, Jelena

Link to this page

Authority KeyName Variants
orcid::0000-0002-7151-2666
  • Rusmirović, Jelena (18)
Projects

Author's Bibliography

Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal

Obradović, Nina; Rusmirović, Jelena; Filipović, Suzana; Kosanović, Darko; Marinković, Aleksandar; Radić, Danka; Pavlović, Vladimir B.

(Desalination Publications, 2020)

TY  - JOUR
AU  - Obradović, Nina
AU  - Rusmirović, Jelena
AU  - Filipović, Suzana
AU  - Kosanović, Darko
AU  - Marinković, Aleksandar
AU  - Radić, Danka
AU  - Pavlović, Vladimir B.
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10040
AB  - Industrial/technological growth is directly connected with environmental pollution, but its influence can be minimized through pollution abatement approaches such as the treatment of industrial wastewater. In this study, novel porous amine-functionalized silicate minerals, specifically, cordierite was investigated for the removal of toxic heavy metals from industrial wastewaters. Cordierite supports were synthesized by mixing MgO, Al2O3 , and SiO2 powders in 2:2:5 molar ratios, and mechanically activated via ball milling in ethanol for 10, 40, or 80 min. Pellets were sintered by heating in air at 20°C min-1 to 1,350°C, for 2 h. Porous supports were produced by coarsely crushing the sintered pellets and mixing the crushed and sieved cordierite powder with 20 wt.% of a pore-forming agent, either nanocellulose or yeast. The resulting pellets were sintered by heating at 5°C min-1 to 700°C in air. The synthetic cordierite support was modified by treatment in poly-ethylenimine. Activated supports were then tested for the removal of Ni2+ and Cd2+ ions. The phase composition of the cordierite supports was analyzed by the X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Analysis of adsorption isotherms, kinetics, and thermodynamic parameters indicated that adsorption was a spontaneous, endothermic process with a maximum adsorption capacity of 36 mg g-1 for Cd2+ and 43 mg g-1 for Ni2+. This work has shed light on the mechanism of heavy metal removal from the aquatic medium using the novel hybrid functionalized cordierite-based ceramic.
PB  - Desalination Publications
T2  - Desalination and Water Treatment
T1  - Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal
SP  - 283
EP  - 296
VL  - 192
DO  - 10.5004/dwt.2020.25736
UR  - https://hdl.handle.net/21.15107/rcub_dais_10040
ER  - 
@article{
author = "Obradović, Nina and Rusmirović, Jelena and Filipović, Suzana and Kosanović, Darko and Marinković, Aleksandar and Radić, Danka and Pavlović, Vladimir B.",
year = "2020",
abstract = "Industrial/technological growth is directly connected with environmental pollution, but its influence can be minimized through pollution abatement approaches such as the treatment of industrial wastewater. In this study, novel porous amine-functionalized silicate minerals, specifically, cordierite was investigated for the removal of toxic heavy metals from industrial wastewaters. Cordierite supports were synthesized by mixing MgO, Al2O3 , and SiO2 powders in 2:2:5 molar ratios, and mechanically activated via ball milling in ethanol for 10, 40, or 80 min. Pellets were sintered by heating in air at 20°C min-1 to 1,350°C, for 2 h. Porous supports were produced by coarsely crushing the sintered pellets and mixing the crushed and sieved cordierite powder with 20 wt.% of a pore-forming agent, either nanocellulose or yeast. The resulting pellets were sintered by heating at 5°C min-1 to 700°C in air. The synthetic cordierite support was modified by treatment in poly-ethylenimine. Activated supports were then tested for the removal of Ni2+ and Cd2+ ions. The phase composition of the cordierite supports was analyzed by the X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Analysis of adsorption isotherms, kinetics, and thermodynamic parameters indicated that adsorption was a spontaneous, endothermic process with a maximum adsorption capacity of 36 mg g-1 for Cd2+ and 43 mg g-1 for Ni2+. This work has shed light on the mechanism of heavy metal removal from the aquatic medium using the novel hybrid functionalized cordierite-based ceramic.",
publisher = "Desalination Publications",
journal = "Desalination and Water Treatment",
title = "Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal",
pages = "283-296",
volume = "192",
doi = "10.5004/dwt.2020.25736",
url = "https://hdl.handle.net/21.15107/rcub_dais_10040"
}
Obradović, N., Rusmirović, J., Filipović, S., Kosanović, D., Marinković, A., Radić, D.,& Pavlović, V. B.. (2020). Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal. in Desalination and Water Treatment
Desalination Publications., 192, 283-296.
https://doi.org/10.5004/dwt.2020.25736
https://hdl.handle.net/21.15107/rcub_dais_10040
Obradović N, Rusmirović J, Filipović S, Kosanović D, Marinković A, Radić D, Pavlović VB. Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal. in Desalination and Water Treatment. 2020;192:283-296.
doi:10.5004/dwt.2020.25736
https://hdl.handle.net/21.15107/rcub_dais_10040 .
Obradović, Nina, Rusmirović, Jelena, Filipović, Suzana, Kosanović, Darko, Marinković, Aleksandar, Radić, Danka, Pavlović, Vladimir B., "Porous cordierite-supported polyethyleneimine composites for nickel(II) and cadmium(II) ions removal" in Desalination and Water Treatment, 192 (2020):283-296,
https://doi.org/10.5004/dwt.2020.25736 .,
https://hdl.handle.net/21.15107/rcub_dais_10040 .

Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0

Rusmirović, Jelena; Obradović, Nina; Perendija, Jovana; Umićević, Ana; Kapidžić, Ana; Vlahović, Branislav; Pavlović, Vera P.; Marinković, Aleksandar D.; Pavlović, Vladimir B.

(Springer, 2019)

TY  - DATA
AU  - Rusmirović, Jelena
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera P.
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/5805
PB  - Springer
T2  - Environmental Science and Pollution Research
T1  - Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0
UR  - https://hdl.handle.net/21.15107/rcub_dais_5805
ER  - 
@misc{
author = "Rusmirović, Jelena and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera P. and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
publisher = "Springer",
journal = "Environmental Science and Pollution Research",
title = "Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0",
url = "https://hdl.handle.net/21.15107/rcub_dais_5805"
}
Rusmirović, J., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V. P., Marinković, A. D.,& Pavlović, V. B.. (2019). Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0. in Environmental Science and Pollution Research
Springer..
https://hdl.handle.net/21.15107/rcub_dais_5805
Rusmirović J, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović VP, Marinković AD, Pavlović VB. Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0. in Environmental Science and Pollution Research. 2019;.
https://hdl.handle.net/21.15107/rcub_dais_5805 .
Rusmirović, Jelena, Obradović, Nina, Perendija, Jovana, Umićević, Ana, Kapidžić, Ana, Vlahović, Branislav, Pavlović, Vera P., Marinković, Aleksandar D., Pavlović, Vladimir B., "Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0" in Environmental Science and Pollution Research (2019),
https://hdl.handle.net/21.15107/rcub_dais_5805 .

Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal

Rusmirović, Jelena; Obradović, Nina; Perendija, Jovana; Umićević, Ana; Kapidžić, Ana; Vlahović, Branislav; Pavlović, Vera P.; Marinković, Aleksandar D.; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Rusmirović, Jelena
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera P.
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/5764
AB  - Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.
PB  - Springer
T2  - Environmental Science and Pollution Research
T1  - Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
SP  - 12379
EP  - 12398
VL  - 26
IS  - 12
DO  - 10.1007/s11356-019-04625-0
UR  - https://hdl.handle.net/21.15107/rcub_dais_5764
ER  - 
@article{
author = "Rusmirović, Jelena and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera P. and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
abstract = "Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.",
publisher = "Springer",
journal = "Environmental Science and Pollution Research",
title = "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal",
pages = "12379-12398",
volume = "26",
number = "12",
doi = "10.1007/s11356-019-04625-0",
url = "https://hdl.handle.net/21.15107/rcub_dais_5764"
}
Rusmirović, J., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V. P., Marinković, A. D.,& Pavlović, V. B.. (2019). Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. in Environmental Science and Pollution Research
Springer., 26(12), 12379-12398.
https://doi.org/10.1007/s11356-019-04625-0
https://hdl.handle.net/21.15107/rcub_dais_5764
Rusmirović J, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović VP, Marinković AD, Pavlović VB. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. in Environmental Science and Pollution Research. 2019;26(12):12379-12398.
doi:10.1007/s11356-019-04625-0
https://hdl.handle.net/21.15107/rcub_dais_5764 .
Rusmirović, Jelena, Obradović, Nina, Perendija, Jovana, Umićević, Ana, Kapidžić, Ana, Vlahović, Branislav, Pavlović, Vera P., Marinković, Aleksandar D., Pavlović, Vladimir B., "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal" in Environmental Science and Pollution Research, 26, no. 12 (2019):12379-12398,
https://doi.org/10.1007/s11356-019-04625-0 .,
https://hdl.handle.net/21.15107/rcub_dais_5764 .
1
4
6
3

Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal

Rusmirović, Jelena; Obradović, Nina; Perendija, Jovana; Umićević, Ana; Kapidžić, Ana; Vlahović, Branislav; Pavlović, Vera; Marinković, Aleksandar D.; Pavlović, Vladimir B.

(Springer, 2019)

TY  - JOUR
AU  - Rusmirović, Jelena
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/5273
AB  - Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.
PB  - Springer
T2  - Environmental Science and Pollution Research
T1  - Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
SP  - 12379
EP  - 12398
VL  - 26
IS  - 12
DO  - 10.1007/s11356-019-04625-0
UR  - https://hdl.handle.net/21.15107/rcub_dais_5273
ER  - 
@article{
author = "Rusmirović, Jelena and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
abstract = "Iron oxide, in the form of magnetite (MG)–functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous WL was synthesized from calcium carbonate and siloxane by controlled sintering process using low molecular weight submicrosized poly(methyl methacrylate) as a pore-forming agent. The precipitation of MG nanoparticles was carried out directly by a polyol-medium solvothermal method or via branched amino/carboxylic acid cross-linker by solvent/nonsolvent method producing WL/MG and WL-γ-APS/MG adsorbents, respectively. The structure/properties of MG functionalized WL was confirmed by applying FTIR, Raman, XRD, Mössbauer, and SEM analysis. Higher adsorption capacities of 73.126, 66.144, 64.168, and 63.456 mg g−1 for WL-γ-APS/MG in relation to WL/MG of 55.450, 52.019, 48.132, and 47.382 mg g−1 for Cd2+, Ni2+, phosphate, and chromate, respectively, were obtained using nonlinear Langmuir model fitting. Adsorption phenomena were analyzed using monolayer statistical physics model for single adsorption with one energy. Kinetic study showed exceptionally higher pseudo-second-order rate constants for WL-γ-APS/MG, e.g., 1.17–13.4 times, with respect to WL/MG indicating importance of both WL surface modification and controllable precipitation of MG on WL-γ-APS.",
publisher = "Springer",
journal = "Environmental Science and Pollution Research",
title = "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal",
pages = "12379-12398",
volume = "26",
number = "12",
doi = "10.1007/s11356-019-04625-0",
url = "https://hdl.handle.net/21.15107/rcub_dais_5273"
}
Rusmirović, J., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A. D.,& Pavlović, V. B.. (2019). Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. in Environmental Science and Pollution Research
Springer., 26(12), 12379-12398.
https://doi.org/10.1007/s11356-019-04625-0
https://hdl.handle.net/21.15107/rcub_dais_5273
Rusmirović J, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović V, Marinković AD, Pavlović VB. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. in Environmental Science and Pollution Research. 2019;26(12):12379-12398.
doi:10.1007/s11356-019-04625-0
https://hdl.handle.net/21.15107/rcub_dais_5273 .
Rusmirović, Jelena, Obradović, Nina, Perendija, Jovana, Umićević, Ana, Kapidžić, Ana, Vlahović, Branislav, Pavlović, Vera, Marinković, Aleksandar D., Pavlović, Vladimir B., "Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal" in Environmental Science and Pollution Research, 26, no. 12 (2019):12379-12398,
https://doi.org/10.1007/s11356-019-04625-0 .,
https://hdl.handle.net/21.15107/rcub_dais_5273 .
1
4
6
6

Arsenic removal by magnetite-loaded amino modified nano/microcellulose adsorbents: Effect of functionalization and media size

Taleb, Khaled; Markovski, Jasmina; Veličković, Zlate; Rusmirović, Jelena; Rančić, Milica P.; Pavlović, Vladimir B.; Marinković, Aleksandar

(Elsevier, 2019)

TY  - JOUR
AU  - Taleb, Khaled
AU  - Markovski, Jasmina
AU  - Veličković, Zlate
AU  - Rusmirović, Jelena
AU  - Rančić, Milica P.
AU  - Pavlović, Vladimir B.
AU  - Marinković, Aleksandar
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/16007
AB  - Comparative adsorption study related to benefits of parent media size, i.e. microfibrillated cellulose (MC) versus nanocellulose (NC) support, for the preparation of magnetite (MG) based high performance adsorbent for arsenic removal was conducted. Precipitation of MG on amino terminal branched organic structure, L, either linked by maleic acid residue on NC surface (NC-MA/L) or linked by oxalyl bridge on MC surface (MC-O/L) produced NC-MA/L-MG and MC-O/L-MG adsorbents, respectively. Precipitation of nanosized MG on amino functionalized NC-MA/L and MC-O/L, performed according to optimized procedure, contributed to improved textural properties and adsorptive/kinetic performances of novel adsorbents. Adsorption capacity of arsenate, As(V), was in favor of NC-MA/L-MG (85.3 versus 18.5 mg g−1) while MC-O/L-MG exhibited faster kinetics (0.541 versus 0.189 g mg−1 min−1). Lower capacity of arsenite, As(III), removal, 68.3 mg g−1 for NC-MA/L-MG and 17.8 mg g−1 for MC-O/L-MG, were obtained. Calculated activation energies, 13.28 and 10.87 kJ mol−1 for NC-MA/L-MG and MC-O/L-MG with respect to As(V), respectively, suggest, in accordance with results of Weber-Morris fitting, that internal mass transfer controls adsorption process. Model free adsorption kinetics confirmed beneficial uses of MC-O/L-MG due to low activation energy dependence on the extent of adsorption.
PB  - Elsevier
T2  - Arabian Journal of Chemistry
T1  - Arsenic removal by magnetite-loaded amino modified nano/microcellulose adsorbents: Effect of functionalization and media size
SP  - 4675
EP  - 4693
VL  - (2016)
VL  - 12
IS  - 8
DO  - 10.1016/j.arabjc.2016.08.006
UR  - https://hdl.handle.net/21.15107/rcub_dais_16007
ER  - 
@article{
author = "Taleb, Khaled and Markovski, Jasmina and Veličković, Zlate and Rusmirović, Jelena and Rančić, Milica P. and Pavlović, Vladimir B. and Marinković, Aleksandar",
year = "2019",
abstract = "Comparative adsorption study related to benefits of parent media size, i.e. microfibrillated cellulose (MC) versus nanocellulose (NC) support, for the preparation of magnetite (MG) based high performance adsorbent for arsenic removal was conducted. Precipitation of MG on amino terminal branched organic structure, L, either linked by maleic acid residue on NC surface (NC-MA/L) or linked by oxalyl bridge on MC surface (MC-O/L) produced NC-MA/L-MG and MC-O/L-MG adsorbents, respectively. Precipitation of nanosized MG on amino functionalized NC-MA/L and MC-O/L, performed according to optimized procedure, contributed to improved textural properties and adsorptive/kinetic performances of novel adsorbents. Adsorption capacity of arsenate, As(V), was in favor of NC-MA/L-MG (85.3 versus 18.5 mg g−1) while MC-O/L-MG exhibited faster kinetics (0.541 versus 0.189 g mg−1 min−1). Lower capacity of arsenite, As(III), removal, 68.3 mg g−1 for NC-MA/L-MG and 17.8 mg g−1 for MC-O/L-MG, were obtained. Calculated activation energies, 13.28 and 10.87 kJ mol−1 for NC-MA/L-MG and MC-O/L-MG with respect to As(V), respectively, suggest, in accordance with results of Weber-Morris fitting, that internal mass transfer controls adsorption process. Model free adsorption kinetics confirmed beneficial uses of MC-O/L-MG due to low activation energy dependence on the extent of adsorption.",
publisher = "Elsevier",
journal = "Arabian Journal of Chemistry",
title = "Arsenic removal by magnetite-loaded amino modified nano/microcellulose adsorbents: Effect of functionalization and media size",
pages = "4675-4693",
volume = "(2016), 12",
number = "8",
doi = "10.1016/j.arabjc.2016.08.006",
url = "https://hdl.handle.net/21.15107/rcub_dais_16007"
}
Taleb, K., Markovski, J., Veličković, Z., Rusmirović, J., Rančić, M. P., Pavlović, V. B.,& Marinković, A.. (2019). Arsenic removal by magnetite-loaded amino modified nano/microcellulose adsorbents: Effect of functionalization and media size. in Arabian Journal of Chemistry
Elsevier., (2016)(8), 4675-4693.
https://doi.org/10.1016/j.arabjc.2016.08.006
https://hdl.handle.net/21.15107/rcub_dais_16007
Taleb K, Markovski J, Veličković Z, Rusmirović J, Rančić MP, Pavlović VB, Marinković A. Arsenic removal by magnetite-loaded amino modified nano/microcellulose adsorbents: Effect of functionalization and media size. in Arabian Journal of Chemistry. 2019;(2016)(8):4675-4693.
doi:10.1016/j.arabjc.2016.08.006
https://hdl.handle.net/21.15107/rcub_dais_16007 .
Taleb, Khaled, Markovski, Jasmina, Veličković, Zlate, Rusmirović, Jelena, Rančić, Milica P., Pavlović, Vladimir B., Marinković, Aleksandar, "Arsenic removal by magnetite-loaded amino modified nano/microcellulose adsorbents: Effect of functionalization and media size" in Arabian Journal of Chemistry, (2016), no. 8 (2019):4675-4693,
https://doi.org/10.1016/j.arabjc.2016.08.006 .,
https://hdl.handle.net/21.15107/rcub_dais_16007 .
36
32
37

The Removal of Ni2+ and Cd2+ -ions onto Synthetic Mineral Based Composite Functionalized by Polyethylenimine

Obradović, Nina; Rusmirović, Jelena; Kosanović, Darko; Đolić, Maja B.; Popović, Ana L.; Pavlović, Vladimir B.; Marinković, Aleksandar D.

(Beograd : Serbian Society of Toxicology, 2018)

TY  - CONF
AU  - Obradović, Nina
AU  - Rusmirović, Jelena
AU  - Kosanović, Darko
AU  - Đolić, Maja B.
AU  - Popović, Ana L.
AU  - Pavlović, Vladimir B.
AU  - Marinković, Aleksandar D.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/4573
AB  - This study presents the synthesis of porous cordierite- based ceramics and its surface activation by polyethylenimine/nano-CeO2 for the heavy metal removal. The synthesis was carried out by the addition of following powders: MgO, Al2O3, and SiO2 in 2:2:5 molar ratios, respectively. The oxide(s) mixture was further processed in two sequential stages: i) ball milled in the ethanol for 40 minutes and palletized under the pressure of 3 t/cm2, as a pre-sintering process, and ii) the pallets were further sintered for 2h in the air atmosphere at 1350 oC, under a heating rate of 20 oC/min. The sintered mineral composite was crashed and sieved, and mixed with 20 wt % of nanocellulose, as a pore forming agent. Nanocellulose mixture was pressed into pallets under 5 t/cm2 and sintered at 700 oC, under a heating rate of 5 oC/ min. The obtained synthetic cordierite was further tested as the adsorbent activated by polyethylenimine/ nano-CeO2 for the removal of Ni2+ and Cd2+ -ions. The adsorption isotherms, kinetics models, and thermodynamic parameters were also analyzed, manifesting that the adsorption is a spontaneous and endothermic process. The phase composition of the pristine and activated cordierite was analyzed by the X-ray diffraction method (XRD), Fourier transformation infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). This work has shed light on the mechanism of heavy metals removal from the aquatic medium using the novel hybrid (nano)synthesized material.
PB  - Beograd : Serbian Society of Toxicology
C3  - Book of Abstracts / 10th Congress of Toxicology in Developing Countries (CTDC10) [and] 12th Congress of the Serbian Society of Toxicology (12th SCT), April 18-21, 2018, Belgrade, Serbia
T1  - The Removal of Ni2+ and Cd2+ -ions onto Synthetic Mineral Based Composite Functionalized by Polyethylenimine
SP  - 144
EP  - 145
UR  - https://hdl.handle.net/21.15107/rcub_dais_4573
ER  - 
@conference{
author = "Obradović, Nina and Rusmirović, Jelena and Kosanović, Darko and Đolić, Maja B. and Popović, Ana L. and Pavlović, Vladimir B. and Marinković, Aleksandar D.",
year = "2018",
abstract = "This study presents the synthesis of porous cordierite- based ceramics and its surface activation by polyethylenimine/nano-CeO2 for the heavy metal removal. The synthesis was carried out by the addition of following powders: MgO, Al2O3, and SiO2 in 2:2:5 molar ratios, respectively. The oxide(s) mixture was further processed in two sequential stages: i) ball milled in the ethanol for 40 minutes and palletized under the pressure of 3 t/cm2, as a pre-sintering process, and ii) the pallets were further sintered for 2h in the air atmosphere at 1350 oC, under a heating rate of 20 oC/min. The sintered mineral composite was crashed and sieved, and mixed with 20 wt % of nanocellulose, as a pore forming agent. Nanocellulose mixture was pressed into pallets under 5 t/cm2 and sintered at 700 oC, under a heating rate of 5 oC/ min. The obtained synthetic cordierite was further tested as the adsorbent activated by polyethylenimine/ nano-CeO2 for the removal of Ni2+ and Cd2+ -ions. The adsorption isotherms, kinetics models, and thermodynamic parameters were also analyzed, manifesting that the adsorption is a spontaneous and endothermic process. The phase composition of the pristine and activated cordierite was analyzed by the X-ray diffraction method (XRD), Fourier transformation infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). This work has shed light on the mechanism of heavy metals removal from the aquatic medium using the novel hybrid (nano)synthesized material.",
publisher = "Beograd : Serbian Society of Toxicology",
journal = "Book of Abstracts / 10th Congress of Toxicology in Developing Countries (CTDC10) [and] 12th Congress of the Serbian Society of Toxicology (12th SCT), April 18-21, 2018, Belgrade, Serbia",
title = "The Removal of Ni2+ and Cd2+ -ions onto Synthetic Mineral Based Composite Functionalized by Polyethylenimine",
pages = "144-145",
url = "https://hdl.handle.net/21.15107/rcub_dais_4573"
}
Obradović, N., Rusmirović, J., Kosanović, D., Đolić, M. B., Popović, A. L., Pavlović, V. B.,& Marinković, A. D.. (2018). The Removal of Ni2+ and Cd2+ -ions onto Synthetic Mineral Based Composite Functionalized by Polyethylenimine. in Book of Abstracts / 10th Congress of Toxicology in Developing Countries (CTDC10) [and] 12th Congress of the Serbian Society of Toxicology (12th SCT), April 18-21, 2018, Belgrade, Serbia
Beograd : Serbian Society of Toxicology., 144-145.
https://hdl.handle.net/21.15107/rcub_dais_4573
Obradović N, Rusmirović J, Kosanović D, Đolić MB, Popović AL, Pavlović VB, Marinković AD. The Removal of Ni2+ and Cd2+ -ions onto Synthetic Mineral Based Composite Functionalized by Polyethylenimine. in Book of Abstracts / 10th Congress of Toxicology in Developing Countries (CTDC10) [and] 12th Congress of the Serbian Society of Toxicology (12th SCT), April 18-21, 2018, Belgrade, Serbia. 2018;:144-145.
https://hdl.handle.net/21.15107/rcub_dais_4573 .
Obradović, Nina, Rusmirović, Jelena, Kosanović, Darko, Đolić, Maja B., Popović, Ana L., Pavlović, Vladimir B., Marinković, Aleksandar D., "The Removal of Ni2+ and Cd2+ -ions onto Synthetic Mineral Based Composite Functionalized by Polyethylenimine" in Book of Abstracts / 10th Congress of Toxicology in Developing Countries (CTDC10) [and] 12th Congress of the Serbian Society of Toxicology (12th SCT), April 18-21, 2018, Belgrade, Serbia (2018):144-145,
https://hdl.handle.net/21.15107/rcub_dais_4573 .

Supporting Information for Macromol. Mater. Eng., DOI: 10.1002/mame.201700648: Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances

Rusmirović, Jelena; Rančić, Milica P.; Pavlović, Vladimir B.; Rakić, Vesna M.; Stevanović, Sanja; Đonlagić, Jasna; Marinković, Aleksandar D.

(2018)

TY  - DATA
AU  - Rusmirović, Jelena
AU  - Rančić, Milica P.
AU  - Pavlović, Vladimir B.
AU  - Rakić, Vesna M.
AU  - Stevanović, Sanja
AU  - Đonlagić, Jasna
AU  - Marinković, Aleksandar D.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/3757
UR  - https://onlinelibrary.wiley.com/action/downloadSupplement?doi=10.1002%2Fmame.201700648&file=mame201700648-sup-0001-S1.pdf
AB  - Cellulose Nanocrystals (NC) Isolation; Isolation of FAs and Preparation of Methyl Esters of FAs; Chemical Modification of NC with FAs and Methyl Esters of FAs; Curing Kinetics Analysis using Raman Spectroscopy; Transmission Electron Microscopy (TEM) Analysis of Nanocomposite Materials; Mechanical Testing of UPe/m-NC Nanocomposite Materials; Dynamic-Mechanical Analysis of Nanocomposite Materials;
T2  - Macromolecular Materials and Engineering
T1  - Supporting Information for Macromol. Mater. Eng., DOI: 10.1002/mame.201700648: Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances
VL  - 303
IS  - 8
UR  - https://hdl.handle.net/21.15107/rcub_dais_3757
ER  - 
@misc{
author = "Rusmirović, Jelena and Rančić, Milica P. and Pavlović, Vladimir B. and Rakić, Vesna M. and Stevanović, Sanja and Đonlagić, Jasna and Marinković, Aleksandar D.",
year = "2018",
abstract = "Cellulose Nanocrystals (NC) Isolation; Isolation of FAs and Preparation of Methyl Esters of FAs; Chemical Modification of NC with FAs and Methyl Esters of FAs; Curing Kinetics Analysis using Raman Spectroscopy; Transmission Electron Microscopy (TEM) Analysis of Nanocomposite Materials; Mechanical Testing of UPe/m-NC Nanocomposite Materials; Dynamic-Mechanical Analysis of Nanocomposite Materials;",
journal = "Macromolecular Materials and Engineering",
title = "Supporting Information for Macromol. Mater. Eng., DOI: 10.1002/mame.201700648: Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances",
volume = "303",
number = "8",
url = "https://hdl.handle.net/21.15107/rcub_dais_3757"
}
Rusmirović, J., Rančić, M. P., Pavlović, V. B., Rakić, V. M., Stevanović, S., Đonlagić, J.,& Marinković, A. D.. (2018). Supporting Information for Macromol. Mater. Eng., DOI: 10.1002/mame.201700648: Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances. in Macromolecular Materials and Engineering, 303(8).
https://hdl.handle.net/21.15107/rcub_dais_3757
Rusmirović J, Rančić MP, Pavlović VB, Rakić VM, Stevanović S, Đonlagić J, Marinković AD. Supporting Information for Macromol. Mater. Eng., DOI: 10.1002/mame.201700648: Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances. in Macromolecular Materials and Engineering. 2018;303(8).
https://hdl.handle.net/21.15107/rcub_dais_3757 .
Rusmirović, Jelena, Rančić, Milica P., Pavlović, Vladimir B., Rakić, Vesna M., Stevanović, Sanja, Đonlagić, Jasna, Marinković, Aleksandar D., "Supporting Information for Macromol. Mater. Eng., DOI: 10.1002/mame.201700648: Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances" in Macromolecular Materials and Engineering, 303, no. 8 (2018),
https://hdl.handle.net/21.15107/rcub_dais_3757 .

Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances

Rusmirović, Jelena; Rančić, Milica P.; Pavlović, Vladimir B.; Rakić, Vesna M.; Stevanović, Sanja; Đonlagić, Jasna; Marinković, Aleksandar D.

(Weinheim : WILEY‐VCH Verlag GmbH & Co. KGaA, 2018)

TY  - JOUR
AU  - Rusmirović, Jelena
AU  - Rančić, Milica P.
AU  - Pavlović, Vladimir B.
AU  - Rakić, Vesna M.
AU  - Stevanović, Sanja
AU  - Đonlagić, Jasna
AU  - Marinković, Aleksandar D.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/3696
AB  - Unsaturated fatty acid (FA)–modified nanocellulose (m-NC) shows potential application in improving mechanical properties of unsaturated polyester/m-NC nanocomposites (UPe/m-NC). A polyester matrix is obtained by polycondensation of maleic anhydride and products of poly(ethylene terephthalate) depolymerization with propylene glycol. Two methods of NC modification are performed: direct esterification with oleic acid, linseed, or sunflower oil FAs, and esterification/amidation with maleic acid/ethylene diamine (MA/EDA) bridging group followed by amidation with methyl ester of FAs. Increases of stress at break in the ranges from 148.8% to 181.4% and from 155.8% to193.0% for UPe/m-NC composites loaded with 1 wt% of NC modified directly or via MA/EDA cross-linker, respectively, are obtained. Results of the modeling of tensile modulus, by using the Cox–Krenchel model, show good agreement with experimentally obtained data. The effect of FAs' cross-linking capabilities on the dynamic-mechanical and thermal properties of the UPe/m-NC is studied. Cross-linking density, modulus, and Tg of the nanocomposite show appropriate relation with the unsaturation extent/structure of NC modification. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
PB  - Weinheim : WILEY‐VCH Verlag GmbH & Co. KGaA
T2  - Macromolecular Materials and Engineering
T1  - Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances
VL  - 303
IS  - 8
DO  - 10.1002/mame.201700648
UR  - https://hdl.handle.net/21.15107/rcub_dais_3696
ER  - 
@article{
author = "Rusmirović, Jelena and Rančić, Milica P. and Pavlović, Vladimir B. and Rakić, Vesna M. and Stevanović, Sanja and Đonlagić, Jasna and Marinković, Aleksandar D.",
year = "2018",
abstract = "Unsaturated fatty acid (FA)–modified nanocellulose (m-NC) shows potential application in improving mechanical properties of unsaturated polyester/m-NC nanocomposites (UPe/m-NC). A polyester matrix is obtained by polycondensation of maleic anhydride and products of poly(ethylene terephthalate) depolymerization with propylene glycol. Two methods of NC modification are performed: direct esterification with oleic acid, linseed, or sunflower oil FAs, and esterification/amidation with maleic acid/ethylene diamine (MA/EDA) bridging group followed by amidation with methyl ester of FAs. Increases of stress at break in the ranges from 148.8% to 181.4% and from 155.8% to193.0% for UPe/m-NC composites loaded with 1 wt% of NC modified directly or via MA/EDA cross-linker, respectively, are obtained. Results of the modeling of tensile modulus, by using the Cox–Krenchel model, show good agreement with experimentally obtained data. The effect of FAs' cross-linking capabilities on the dynamic-mechanical and thermal properties of the UPe/m-NC is studied. Cross-linking density, modulus, and Tg of the nanocomposite show appropriate relation with the unsaturation extent/structure of NC modification. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim",
publisher = "Weinheim : WILEY‐VCH Verlag GmbH & Co. KGaA",
journal = "Macromolecular Materials and Engineering",
title = "Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances",
volume = "303",
number = "8",
doi = "10.1002/mame.201700648",
url = "https://hdl.handle.net/21.15107/rcub_dais_3696"
}
Rusmirović, J., Rančić, M. P., Pavlović, V. B., Rakić, V. M., Stevanović, S., Đonlagić, J.,& Marinković, A. D.. (2018). Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances. in Macromolecular Materials and Engineering
Weinheim : WILEY‐VCH Verlag GmbH & Co. KGaA., 303(8).
https://doi.org/10.1002/mame.201700648
https://hdl.handle.net/21.15107/rcub_dais_3696
Rusmirović J, Rančić MP, Pavlović VB, Rakić VM, Stevanović S, Đonlagić J, Marinković AD. Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances. in Macromolecular Materials and Engineering. 2018;303(8).
doi:10.1002/mame.201700648
https://hdl.handle.net/21.15107/rcub_dais_3696 .
Rusmirović, Jelena, Rančić, Milica P., Pavlović, Vladimir B., Rakić, Vesna M., Stevanović, Sanja, Đonlagić, Jasna, Marinković, Aleksandar D., "Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances" in Macromolecular Materials and Engineering, 303, no. 8 (2018),
https://doi.org/10.1002/mame.201700648 .,
https://hdl.handle.net/21.15107/rcub_dais_3696 .
8
5
7

Adsorption capacities of Shungite - a Russian Mineral

Obradović, Nina; Rusmirović, Jelena

(Belgrade : Serbian Ceramic Society, 2018)

TY  - CONF
AU  - Obradović, Nina
AU  - Rusmirović, Jelena
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/4115
AB  - Shungite, a carbon-rich rock of the Precambrian age widespread over Russia, attracts much attention due to possibilities of application in various industrial and medical fields. Carbon acts as an efficient catalyst of hydrogenation at low temperatures, as an adsorbent and filter in water purification processes, and as a multifunctional filler of polymeric and inorganic binders. The presence of the starting components α-SiO2, Fe2O3, carbon C, α-Al2O3, γ-Al2O3, and CaCO3 has been determined by XRD measurement. Particle size distribution of the initial powder indicates large agglomerates with size of 10 microns and larger, confirmed by SEM also. In a batch test, the influence of shungite mass, contact time and temperature on adsorption efficiency of amlodipine, medicament used to treat high blood pressure and coronary artery disease, has been investigated. This material showed moderate adsorption capacity of 54.95 mg/g at 10 mg/l initial amlodipine concentration. The concentrations of amlodipine were determined using UVVIS spectrometry.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018,
T1  - Adsorption capacities of Shungite - a Russian Mineral
SP  - 74
EP  - 74
UR  - https://hdl.handle.net/21.15107/rcub_dais_4115
ER  - 
@conference{
author = "Obradović, Nina and Rusmirović, Jelena",
year = "2018",
abstract = "Shungite, a carbon-rich rock of the Precambrian age widespread over Russia, attracts much attention due to possibilities of application in various industrial and medical fields. Carbon acts as an efficient catalyst of hydrogenation at low temperatures, as an adsorbent and filter in water purification processes, and as a multifunctional filler of polymeric and inorganic binders. The presence of the starting components α-SiO2, Fe2O3, carbon C, α-Al2O3, γ-Al2O3, and CaCO3 has been determined by XRD measurement. Particle size distribution of the initial powder indicates large agglomerates with size of 10 microns and larger, confirmed by SEM also. In a batch test, the influence of shungite mass, contact time and temperature on adsorption efficiency of amlodipine, medicament used to treat high blood pressure and coronary artery disease, has been investigated. This material showed moderate adsorption capacity of 54.95 mg/g at 10 mg/l initial amlodipine concentration. The concentrations of amlodipine were determined using UVVIS spectrometry.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018,",
title = "Adsorption capacities of Shungite - a Russian Mineral",
pages = "74-74",
url = "https://hdl.handle.net/21.15107/rcub_dais_4115"
}
Obradović, N.,& Rusmirović, J.. (2018). Adsorption capacities of Shungite - a Russian Mineral. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018,
Belgrade : Serbian Ceramic Society., 74-74.
https://hdl.handle.net/21.15107/rcub_dais_4115
Obradović N, Rusmirović J. Adsorption capacities of Shungite - a Russian Mineral. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018,. 2018;:74-74.
https://hdl.handle.net/21.15107/rcub_dais_4115 .
Obradović, Nina, Rusmirović, Jelena, "Adsorption capacities of Shungite - a Russian Mineral" in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018, (2018):74-74,
https://hdl.handle.net/21.15107/rcub_dais_4115 .

Supplementary material for: Rusmirović, J.D., Ivanović, J.Z., Pavlović, V.B., Rakić, V.M., Rančić, M.P., Djokić, V., Marinković, A.D., 2017. Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. Carbohydrate Polymers 164, 64–74. https://doi.org/10.1016/j.carbpol.2017.01.086

Rusmirović, Jelena; Ivanović, Jasna; Pavlović, Vladimir B.; Rakić, Vesna M.; Rančić, Milica P.; Đokić, Veljko; Marinković, Aleksandar D.

(2017)

TY  - DATA
AU  - Rusmirović, Jelena
AU  - Ivanović, Jasna
AU  - Pavlović, Vladimir B.
AU  - Rakić, Vesna M.
AU  - Rančić, Milica P.
AU  - Đokić, Veljko
AU  - Marinković, Aleksandar D.
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/5980
T2  - Carbohydrate Polymers
T1  - Supplementary material for: Rusmirović, J.D., Ivanović, J.Z., Pavlović, V.B., Rakić, V.M., Rančić, M.P., Djokić, V., Marinković, A.D., 2017. Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. Carbohydrate Polymers 164, 64–74. https://doi.org/10.1016/j.carbpol.2017.01.086
UR  - https://hdl.handle.net/21.15107/rcub_dais_5980
ER  - 
@misc{
author = "Rusmirović, Jelena and Ivanović, Jasna and Pavlović, Vladimir B. and Rakić, Vesna M. and Rančić, Milica P. and Đokić, Veljko and Marinković, Aleksandar D.",
year = "2017",
journal = "Carbohydrate Polymers",
title = "Supplementary material for: Rusmirović, J.D., Ivanović, J.Z., Pavlović, V.B., Rakić, V.M., Rančić, M.P., Djokić, V., Marinković, A.D., 2017. Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. Carbohydrate Polymers 164, 64–74. https://doi.org/10.1016/j.carbpol.2017.01.086",
url = "https://hdl.handle.net/21.15107/rcub_dais_5980"
}
Rusmirović, J., Ivanović, J., Pavlović, V. B., Rakić, V. M., Rančić, M. P., Đokić, V.,& Marinković, A. D.. (2017). Supplementary material for: Rusmirović, J.D., Ivanović, J.Z., Pavlović, V.B., Rakić, V.M., Rančić, M.P., Djokić, V., Marinković, A.D., 2017. Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. Carbohydrate Polymers 164, 64–74. https://doi.org/10.1016/j.carbpol.2017.01.086. in Carbohydrate Polymers.
https://hdl.handle.net/21.15107/rcub_dais_5980
Rusmirović J, Ivanović J, Pavlović VB, Rakić VM, Rančić MP, Đokić V, Marinković AD. Supplementary material for: Rusmirović, J.D., Ivanović, J.Z., Pavlović, V.B., Rakić, V.M., Rančić, M.P., Djokić, V., Marinković, A.D., 2017. Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. Carbohydrate Polymers 164, 64–74. https://doi.org/10.1016/j.carbpol.2017.01.086. in Carbohydrate Polymers. 2017;.
https://hdl.handle.net/21.15107/rcub_dais_5980 .
Rusmirović, Jelena, Ivanović, Jasna, Pavlović, Vladimir B., Rakić, Vesna M., Rančić, Milica P., Đokić, Veljko, Marinković, Aleksandar D., "Supplementary material for: Rusmirović, J.D., Ivanović, J.Z., Pavlović, V.B., Rakić, V.M., Rančić, M.P., Djokić, V., Marinković, A.D., 2017. Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. Carbohydrate Polymers 164, 64–74. https://doi.org/10.1016/j.carbpol.2017.01.086" in Carbohydrate Polymers (2017),
https://hdl.handle.net/21.15107/rcub_dais_5980 .

Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites

Rusmirović, Jelena; Ivanović, Jasna; Pavlović, Vladimir B.; Rakić, Vesna M.; Rančić, Milica P.; Đokić, Veljko; Marinković, Aleksandar D.

(Elsevier, 2017)

TY  - JOUR
AU  - Rusmirović, Jelena
AU  - Ivanović, Jasna
AU  - Pavlović, Vladimir B.
AU  - Rakić, Vesna M.
AU  - Rančić, Milica P.
AU  - Đokić, Veljko
AU  - Marinković, Aleksandar D.
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/4614
AB  - The influence of modification and vacuum/supercritical CO2 (scCO2) drying methods on the surface properties, morphology and thermal stability of cellulose nanocrystals (NC) was presented in this study. Introduction of reactive vinyl groups on NC surface was performed by either direct esterification with oleic acid, linseed or sunflower oil fatty acids; or by amidation of maleic acid/ethylene diamine with methyl ester of fatty acid. Obtained modified NC (m-NC) were characterized using FTIR and Raman spectroscopy; and by determination of acid, iodine and ester values. Structural analysis of m-NC showed varieties of forms, from spongy to nanostructural non-uniform layered morphology with observable agglomeration, which confirmed morphology dependence on modification/processing methods Thermogravimetry-MS spectrometry showed different thermal stability and degradation pathways of NC/m-NC. Incorporation of 1 wt% of reactive m-NC in unsaturated polyester lead to high performance nanocomposites and contributed to increase of stress at break in the range from 76 to 93%.
PB  - Elsevier
T2  - Carbohydrate Polymers
T1  - Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites
SP  - 64
EP  - 74
VL  - 164
DO  - 10.1016/j.carbpol.2017.01.086
UR  - https://hdl.handle.net/21.15107/rcub_dais_4614
ER  - 
@article{
author = "Rusmirović, Jelena and Ivanović, Jasna and Pavlović, Vladimir B. and Rakić, Vesna M. and Rančić, Milica P. and Đokić, Veljko and Marinković, Aleksandar D.",
year = "2017",
abstract = "The influence of modification and vacuum/supercritical CO2 (scCO2) drying methods on the surface properties, morphology and thermal stability of cellulose nanocrystals (NC) was presented in this study. Introduction of reactive vinyl groups on NC surface was performed by either direct esterification with oleic acid, linseed or sunflower oil fatty acids; or by amidation of maleic acid/ethylene diamine with methyl ester of fatty acid. Obtained modified NC (m-NC) were characterized using FTIR and Raman spectroscopy; and by determination of acid, iodine and ester values. Structural analysis of m-NC showed varieties of forms, from spongy to nanostructural non-uniform layered morphology with observable agglomeration, which confirmed morphology dependence on modification/processing methods Thermogravimetry-MS spectrometry showed different thermal stability and degradation pathways of NC/m-NC. Incorporation of 1 wt% of reactive m-NC in unsaturated polyester lead to high performance nanocomposites and contributed to increase of stress at break in the range from 76 to 93%.",
publisher = "Elsevier",
journal = "Carbohydrate Polymers",
title = "Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites",
pages = "64-74",
volume = "164",
doi = "10.1016/j.carbpol.2017.01.086",
url = "https://hdl.handle.net/21.15107/rcub_dais_4614"
}
Rusmirović, J., Ivanović, J., Pavlović, V. B., Rakić, V. M., Rančić, M. P., Đokić, V.,& Marinković, A. D.. (2017). Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. in Carbohydrate Polymers
Elsevier., 164, 64-74.
https://doi.org/10.1016/j.carbpol.2017.01.086
https://hdl.handle.net/21.15107/rcub_dais_4614
Rusmirović J, Ivanović J, Pavlović VB, Rakić VM, Rančić MP, Đokić V, Marinković AD. Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. in Carbohydrate Polymers. 2017;164:64-74.
doi:10.1016/j.carbpol.2017.01.086
https://hdl.handle.net/21.15107/rcub_dais_4614 .
Rusmirović, Jelena, Ivanović, Jasna, Pavlović, Vladimir B., Rakić, Vesna M., Rančić, Milica P., Đokić, Veljko, Marinković, Aleksandar D., "Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites" in Carbohydrate Polymers, 164 (2017):64-74,
https://doi.org/10.1016/j.carbpol.2017.01.086 .,
https://hdl.handle.net/21.15107/rcub_dais_4614 .
20
16
18

Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites

Rusmirović, Jelena; Ivanović, Jasna; Pavlović, Vladimir B.; Rakić, Vesna M.; Rančić, Milica P.; Đokić, Veljko; Marinković, Aleksandar D.

(Elsevier, 2017)

TY  - JOUR
AU  - Rusmirović, Jelena
AU  - Ivanović, Jasna
AU  - Pavlović, Vladimir B.
AU  - Rakić, Vesna M.
AU  - Rančić, Milica P.
AU  - Đokić, Veljko
AU  - Marinković, Aleksandar D.
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/2380
AB  - The influence of modification and vacuum/supercritical CO2 (scCO2) drying methods on the surface properties, morphology and thermal stability of cellulose nanocrystals (NC) was presented in this study. Introduction of reactive vinyl groups on NC surface was performed by either direct esterification with oleic acid, linseed or sunflower oil fatty acids; or by amidation of maleic acid/ethylene diamine with methyl ester of fatty acid. Obtained modified NC (m-NC) were characterized using FTIR and Raman spectroscopy; and by determination of acid, iodine and ester values. Structural analysis of m-NC showed varieties of forms, from spongy to nanostructural non-uniform layered morphology with observable agglomeration, which confirmed morphology dependence on modification/processing methods Thermogravimetry-MS spectrometry showed different thermal stability and degradation pathways of NC/m-NC. Incorporation of 1 wt% of reactive m-NC in unsaturated polyester lead to high performance nanocomposites and contributed to increase of stress at break in the range from 76 to 93%.
PB  - Elsevier
T2  - Carbohydrate Polymers
T1  - Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites
SP  - 64
EP  - 74
VL  - 164
DO  - 10.1016/j.carbpol.2017.01.086
UR  - https://hdl.handle.net/21.15107/rcub_dais_2380
ER  - 
@article{
author = "Rusmirović, Jelena and Ivanović, Jasna and Pavlović, Vladimir B. and Rakić, Vesna M. and Rančić, Milica P. and Đokić, Veljko and Marinković, Aleksandar D.",
year = "2017",
abstract = "The influence of modification and vacuum/supercritical CO2 (scCO2) drying methods on the surface properties, morphology and thermal stability of cellulose nanocrystals (NC) was presented in this study. Introduction of reactive vinyl groups on NC surface was performed by either direct esterification with oleic acid, linseed or sunflower oil fatty acids; or by amidation of maleic acid/ethylene diamine with methyl ester of fatty acid. Obtained modified NC (m-NC) were characterized using FTIR and Raman spectroscopy; and by determination of acid, iodine and ester values. Structural analysis of m-NC showed varieties of forms, from spongy to nanostructural non-uniform layered morphology with observable agglomeration, which confirmed morphology dependence on modification/processing methods Thermogravimetry-MS spectrometry showed different thermal stability and degradation pathways of NC/m-NC. Incorporation of 1 wt% of reactive m-NC in unsaturated polyester lead to high performance nanocomposites and contributed to increase of stress at break in the range from 76 to 93%.",
publisher = "Elsevier",
journal = "Carbohydrate Polymers",
title = "Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites",
pages = "64-74",
volume = "164",
doi = "10.1016/j.carbpol.2017.01.086",
url = "https://hdl.handle.net/21.15107/rcub_dais_2380"
}
Rusmirović, J., Ivanović, J., Pavlović, V. B., Rakić, V. M., Rančić, M. P., Đokić, V.,& Marinković, A. D.. (2017). Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. in Carbohydrate Polymers
Elsevier., 164, 64-74.
https://doi.org/10.1016/j.carbpol.2017.01.086
https://hdl.handle.net/21.15107/rcub_dais_2380
Rusmirović J, Ivanović J, Pavlović VB, Rakić VM, Rančić MP, Đokić V, Marinković AD. Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. in Carbohydrate Polymers. 2017;164:64-74.
doi:10.1016/j.carbpol.2017.01.086
https://hdl.handle.net/21.15107/rcub_dais_2380 .
Rusmirović, Jelena, Ivanović, Jasna, Pavlović, Vladimir B., Rakić, Vesna M., Rančić, Milica P., Đokić, Veljko, Marinković, Aleksandar D., "Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites" in Carbohydrate Polymers, 164 (2017):64-74,
https://doi.org/10.1016/j.carbpol.2017.01.086 .,
https://hdl.handle.net/21.15107/rcub_dais_2380 .
20
16
18

Preparation of cordierite-based adsorbents for water purification

Obradović, Nina; Kosanović, Darko; Filipović, Suzana; Rusmirović, Jelena; Marinković, Aleksandar D.; Radić, Danka; Pavlović, Vladimir B.

(Belgrade : Serbian Ceramic Society, 2017)

TY  - CONF
AU  - Obradović, Nina
AU  - Kosanović, Darko
AU  - Filipović, Suzana
AU  - Rusmirović, Jelena
AU  - Marinković, Aleksandar D.
AU  - Radić, Danka
AU  - Pavlović, Vladimir B.
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/4776
AB  - In this study, porous cordierite-based ceramics was synthesized. In the first step, MgO, Al2O3, and SiO2 (all Aldrich, p.a.) were used. MgO and Al2O3 powders were calcined at 1000 oC for 2 h, in order to avoid hydroxides. They were mixed in 2:2:5 molar ratio, in order to form cordierite, Mg2Al4Si5O18. Ethanol was added to the mixture, and then milled in a Fritsch Pulverisette planetary mill, with 300 rpm, in air atmosfere. Times of activation were 0, 10, 40, and 80 min, while balls and vessels were made from ZrO2, and powder to balls mass ratio was 40:1. After milling, powders were dried, and then pressed under 3 t/cm2. Pallets with 8 mm radius were sintered in air at 1350 oC, for 2 h, heating rate was 20 oC/min. Sintered samples were crashed and sieved. In the secons step, the as-prepared cordierite was mixed with 20 wt.% yeast (0.1 g yeast + 0.4 g cordierite per sample). The other mixture was with 20 wt.% nanocellulose (0.1 g NC + 0.4 g cordierite per sample). Both mixtures were pressed into pallets under 5 t/cm2 and sintered at 700 oC, with 5 oC/min heating rate, in air atmosfere. During the second sintering regime, porous cordierite-based ceramics was obtained. The phase composition of the sintered samples as well as microstructures was analyzed by the means of X-ray diffraction method and SEM. Cordierite was the most abundant phase in all sintered samples. It was observed that addition of different pore-forming agent resulted in significantly different microstructures.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017
T1  - Preparation of cordierite-based adsorbents for water purification
SP  - 71
EP  - 71
UR  - https://hdl.handle.net/21.15107/rcub_dais_4776
ER  - 
@conference{
author = "Obradović, Nina and Kosanović, Darko and Filipović, Suzana and Rusmirović, Jelena and Marinković, Aleksandar D. and Radić, Danka and Pavlović, Vladimir B.",
year = "2017",
abstract = "In this study, porous cordierite-based ceramics was synthesized. In the first step, MgO, Al2O3, and SiO2 (all Aldrich, p.a.) were used. MgO and Al2O3 powders were calcined at 1000 oC for 2 h, in order to avoid hydroxides. They were mixed in 2:2:5 molar ratio, in order to form cordierite, Mg2Al4Si5O18. Ethanol was added to the mixture, and then milled in a Fritsch Pulverisette planetary mill, with 300 rpm, in air atmosfere. Times of activation were 0, 10, 40, and 80 min, while balls and vessels were made from ZrO2, and powder to balls mass ratio was 40:1. After milling, powders were dried, and then pressed under 3 t/cm2. Pallets with 8 mm radius were sintered in air at 1350 oC, for 2 h, heating rate was 20 oC/min. Sintered samples were crashed and sieved. In the secons step, the as-prepared cordierite was mixed with 20 wt.% yeast (0.1 g yeast + 0.4 g cordierite per sample). The other mixture was with 20 wt.% nanocellulose (0.1 g NC + 0.4 g cordierite per sample). Both mixtures were pressed into pallets under 5 t/cm2 and sintered at 700 oC, with 5 oC/min heating rate, in air atmosfere. During the second sintering regime, porous cordierite-based ceramics was obtained. The phase composition of the sintered samples as well as microstructures was analyzed by the means of X-ray diffraction method and SEM. Cordierite was the most abundant phase in all sintered samples. It was observed that addition of different pore-forming agent resulted in significantly different microstructures.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017",
title = "Preparation of cordierite-based adsorbents for water purification",
pages = "71-71",
url = "https://hdl.handle.net/21.15107/rcub_dais_4776"
}
Obradović, N., Kosanović, D., Filipović, S., Rusmirović, J., Marinković, A. D., Radić, D.,& Pavlović, V. B.. (2017). Preparation of cordierite-based adsorbents for water purification. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017
Belgrade : Serbian Ceramic Society., 71-71.
https://hdl.handle.net/21.15107/rcub_dais_4776
Obradović N, Kosanović D, Filipović S, Rusmirović J, Marinković AD, Radić D, Pavlović VB. Preparation of cordierite-based adsorbents for water purification. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017. 2017;:71-71.
https://hdl.handle.net/21.15107/rcub_dais_4776 .
Obradović, Nina, Kosanović, Darko, Filipović, Suzana, Rusmirović, Jelena, Marinković, Aleksandar D., Radić, Danka, Pavlović, Vladimir B., "Preparation of cordierite-based adsorbents for water purification" in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017 (2017):71-71,
https://hdl.handle.net/21.15107/rcub_dais_4776 .

Effect of the vinyl modification of multi-walled carbon nanotubes on the performances of waste poly(ethylene terephthalate)-based nanocomposites

Tasić, Ana; Rusmirović, Jelena; Nikolić, Jovana; Božić, Aleksandra; Pavlović, Vladimir B.; Marinković, Aleksandar D.; Uskoković, Petar S.

(SAGE, 2017)

TY  - JOUR
AU  - Tasić, Ana
AU  - Rusmirović, Jelena
AU  - Nikolić, Jovana
AU  - Božić, Aleksandra
AU  - Pavlović, Vladimir B.
AU  - Marinković, Aleksandar D.
AU  - Uskoković, Petar S.
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/3682
AB  - Production of high-performance nanocomposite materials obtained from unsaturated polyester resin, based on products of the waste poly(ethylene terephthalate) recycling, and modified multi-walled carbon nanotubes is presented. Di-hydroxy functional glycolysates, synthesized by catalytic depolymerization of poly(ethylene terephthalate) with propylene glycol, were used for the unsaturated polyester resin synthesis. The structure of the obtained glycolysis product and unsaturated polyester resin were characterized by using FTIR and NMR spectroscopy, and by acid, iodine, and hydroxyl value. Nanofillers were prepared by direct and two-step amidation of oxidized multi-walled carbon nanotubes. Direct amidation with diallylamine produced multi-walled carbon nanotube-diallylamine reactive nanofiller. Two-step modification with diamines: hexamethylenediamine and p-phenylenediamine gave multi-walled carbon nanotube-hexamethylenediamine and multi-walled carbon nanotube-p-phenylenediamine nanofiller, respectively, whose amidation with methyl ester of linseed oil fatty acids gave multi-walled carbon nanotube-hexamethylenediamine/methyl ester of linseed oil fatty acid and multi-walled carbon nanotube-p-phenylenediamine/methyl ester of linseed oil fatty acid nanofiller, respectively. Influences of vinyl functionalities on mechanical properties of nanocomposite were analyzed from tensile strength (σb), elongation (ϵb) and Young's modulus (E) determination. An increase of 97.4, 119 and 139% of σb was obtained for nanocomposites with addition of 0.25 wt.% of diallylamine, p-phenylenediamine/methyl ester of linseed oil fatty acid and hexamethylenediamine/methyl ester of linseed oil fatty acid multi-walled carbon nanotubes, respectively. Short techno-economic analysis, performed on the basis of fixed and variable unsaturated polyester resin production costs, showed satisfactory potential profit, which could be realized by the implementation of the presented technology. © The Author(s) 2016.
PB  - SAGE
T2  - Journal of Composite Materials
T1  - Effect of the vinyl modification of multi-walled carbon nanotubes on the performances of waste poly(ethylene terephthalate)-based nanocomposites
SP  - 491
EP  - 505
VL  - 51
IS  - 4
DO  - 10.1177/0021998316648757
UR  - https://hdl.handle.net/21.15107/rcub_dais_3682
ER  - 
@article{
author = "Tasić, Ana and Rusmirović, Jelena and Nikolić, Jovana and Božić, Aleksandra and Pavlović, Vladimir B. and Marinković, Aleksandar D. and Uskoković, Petar S.",
year = "2017",
abstract = "Production of high-performance nanocomposite materials obtained from unsaturated polyester resin, based on products of the waste poly(ethylene terephthalate) recycling, and modified multi-walled carbon nanotubes is presented. Di-hydroxy functional glycolysates, synthesized by catalytic depolymerization of poly(ethylene terephthalate) with propylene glycol, were used for the unsaturated polyester resin synthesis. The structure of the obtained glycolysis product and unsaturated polyester resin were characterized by using FTIR and NMR spectroscopy, and by acid, iodine, and hydroxyl value. Nanofillers were prepared by direct and two-step amidation of oxidized multi-walled carbon nanotubes. Direct amidation with diallylamine produced multi-walled carbon nanotube-diallylamine reactive nanofiller. Two-step modification with diamines: hexamethylenediamine and p-phenylenediamine gave multi-walled carbon nanotube-hexamethylenediamine and multi-walled carbon nanotube-p-phenylenediamine nanofiller, respectively, whose amidation with methyl ester of linseed oil fatty acids gave multi-walled carbon nanotube-hexamethylenediamine/methyl ester of linseed oil fatty acid and multi-walled carbon nanotube-p-phenylenediamine/methyl ester of linseed oil fatty acid nanofiller, respectively. Influences of vinyl functionalities on mechanical properties of nanocomposite were analyzed from tensile strength (σb), elongation (ϵb) and Young's modulus (E) determination. An increase of 97.4, 119 and 139% of σb was obtained for nanocomposites with addition of 0.25 wt.% of diallylamine, p-phenylenediamine/methyl ester of linseed oil fatty acid and hexamethylenediamine/methyl ester of linseed oil fatty acid multi-walled carbon nanotubes, respectively. Short techno-economic analysis, performed on the basis of fixed and variable unsaturated polyester resin production costs, showed satisfactory potential profit, which could be realized by the implementation of the presented technology. © The Author(s) 2016.",
publisher = "SAGE",
journal = "Journal of Composite Materials",
title = "Effect of the vinyl modification of multi-walled carbon nanotubes on the performances of waste poly(ethylene terephthalate)-based nanocomposites",
pages = "491-505",
volume = "51",
number = "4",
doi = "10.1177/0021998316648757",
url = "https://hdl.handle.net/21.15107/rcub_dais_3682"
}
Tasić, A., Rusmirović, J., Nikolić, J., Božić, A., Pavlović, V. B., Marinković, A. D.,& Uskoković, P. S.. (2017). Effect of the vinyl modification of multi-walled carbon nanotubes on the performances of waste poly(ethylene terephthalate)-based nanocomposites. in Journal of Composite Materials
SAGE., 51(4), 491-505.
https://doi.org/10.1177/0021998316648757
https://hdl.handle.net/21.15107/rcub_dais_3682
Tasić A, Rusmirović J, Nikolić J, Božić A, Pavlović VB, Marinković AD, Uskoković PS. Effect of the vinyl modification of multi-walled carbon nanotubes on the performances of waste poly(ethylene terephthalate)-based nanocomposites. in Journal of Composite Materials. 2017;51(4):491-505.
doi:10.1177/0021998316648757
https://hdl.handle.net/21.15107/rcub_dais_3682 .
Tasić, Ana, Rusmirović, Jelena, Nikolić, Jovana, Božić, Aleksandra, Pavlović, Vladimir B., Marinković, Aleksandar D., Uskoković, Petar S., "Effect of the vinyl modification of multi-walled carbon nanotubes on the performances of waste poly(ethylene terephthalate)-based nanocomposites" in Journal of Composite Materials, 51, no. 4 (2017):491-505,
https://doi.org/10.1177/0021998316648757 .,
https://hdl.handle.net/21.15107/rcub_dais_3682 .
10
2
6

Formation of porous wollastonite-based ceramics after sintering with yeast as the pore-forming agent

Obradović, Nina; Filipović, Suzana; Rusmirović, Jelena; Postole, Georgeta; Marinković, Aleksandar; Radić, Danka; Rakić, Vesna M.; Pavlović, Vladimir B.; Auroux, Aline

(Belgrade : International Institute for the Science of Sintering, 2017)

TY  - JOUR
AU  - Obradović, Nina
AU  - Filipović, Suzana
AU  - Rusmirović, Jelena
AU  - Postole, Georgeta
AU  - Marinković, Aleksandar
AU  - Radić, Danka
AU  - Rakić, Vesna M.
AU  - Pavlović, Vladimir B.
AU  - Auroux, Aline
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/2384
AB  - In this paper, synthesis of porous wollastonite-based ceramics was reported. Ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as starting material. After 20 min of ultrasound treatment, and calcination at 250 oC for 30 min, yeast as a pore-forming agent was added to the as-obtained powders. Sintering regime was set up based on the results obtained by differential thermal analysis. Prepared mixture was pressed into pallets and sintered at 900 oC for 1 h. After the sintering regime, porous wollastonite-based ceramics was obtained. The phase composition of the sintered samples as well as microstructures was analyzed by X-ray diffraction method and SEM. In a batch test, the influence of pH, contact time and initial ion concentration on adsorption efficiency of As+5, Cr+6, and phosphate ions on synthesized wollastonite-based ceramics were studied. Time-dependent adsorption was best described by pseudo-second-order kinetic model and Weber-Morris model that predicted intra-particle diffusion as a rate-controlling step of overall process. High adsorption capacities 39.97, 21.87, and 15.29 mgg-1 were obtained for As+5, Cr+6, and phosphate ions, respectively.
PB  - Belgrade : International Institute for the Science of Sintering
T2  - Science of Sintering
T1  - Formation of porous wollastonite-based ceramics after sintering with yeast as the pore-forming agent
SP  - 235
EP  - 246
VL  - 49
IS  - 3
DO  - 10.2298/SOS1703235O
UR  - https://hdl.handle.net/21.15107/rcub_dais_2384
ER  - 
@article{
author = "Obradović, Nina and Filipović, Suzana and Rusmirović, Jelena and Postole, Georgeta and Marinković, Aleksandar and Radić, Danka and Rakić, Vesna M. and Pavlović, Vladimir B. and Auroux, Aline",
year = "2017",
abstract = "In this paper, synthesis of porous wollastonite-based ceramics was reported. Ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as starting material. After 20 min of ultrasound treatment, and calcination at 250 oC for 30 min, yeast as a pore-forming agent was added to the as-obtained powders. Sintering regime was set up based on the results obtained by differential thermal analysis. Prepared mixture was pressed into pallets and sintered at 900 oC for 1 h. After the sintering regime, porous wollastonite-based ceramics was obtained. The phase composition of the sintered samples as well as microstructures was analyzed by X-ray diffraction method and SEM. In a batch test, the influence of pH, contact time and initial ion concentration on adsorption efficiency of As+5, Cr+6, and phosphate ions on synthesized wollastonite-based ceramics were studied. Time-dependent adsorption was best described by pseudo-second-order kinetic model and Weber-Morris model that predicted intra-particle diffusion as a rate-controlling step of overall process. High adsorption capacities 39.97, 21.87, and 15.29 mgg-1 were obtained for As+5, Cr+6, and phosphate ions, respectively.",
publisher = "Belgrade : International Institute for the Science of Sintering",
journal = "Science of Sintering",
title = "Formation of porous wollastonite-based ceramics after sintering with yeast as the pore-forming agent",
pages = "235-246",
volume = "49",
number = "3",
doi = "10.2298/SOS1703235O",
url = "https://hdl.handle.net/21.15107/rcub_dais_2384"
}
Obradović, N., Filipović, S., Rusmirović, J., Postole, G., Marinković, A., Radić, D., Rakić, V. M., Pavlović, V. B.,& Auroux, A.. (2017). Formation of porous wollastonite-based ceramics after sintering with yeast as the pore-forming agent. in Science of Sintering
Belgrade : International Institute for the Science of Sintering., 49(3), 235-246.
https://doi.org/10.2298/SOS1703235O
https://hdl.handle.net/21.15107/rcub_dais_2384
Obradović N, Filipović S, Rusmirović J, Postole G, Marinković A, Radić D, Rakić VM, Pavlović VB, Auroux A. Formation of porous wollastonite-based ceramics after sintering with yeast as the pore-forming agent. in Science of Sintering. 2017;49(3):235-246.
doi:10.2298/SOS1703235O
https://hdl.handle.net/21.15107/rcub_dais_2384 .
Obradović, Nina, Filipović, Suzana, Rusmirović, Jelena, Postole, Georgeta, Marinković, Aleksandar, Radić, Danka, Rakić, Vesna M., Pavlović, Vladimir B., Auroux, Aline, "Formation of porous wollastonite-based ceramics after sintering with yeast as the pore-forming agent" in Science of Sintering, 49, no. 3 (2017):235-246,
https://doi.org/10.2298/SOS1703235O .,
https://hdl.handle.net/21.15107/rcub_dais_2384 .
2
2
5

Influence of different pore-forming agents on wollastonite microstructures and adsorption capacities

Obradović, Nina; Filipović, Suzana; Marković, Smilja; Mitrić, Miodrag; Rusmirović, Jelena; Marinković, Aleksandar; Antić, Vesna; Pavlović, Vladimir B.

(Elsevier, 2017)

TY  - JOUR
AU  - Obradović, Nina
AU  - Filipović, Suzana
AU  - Marković, Smilja
AU  - Mitrić, Miodrag
AU  - Rusmirović, Jelena
AU  - Marinković, Aleksandar
AU  - Antić, Vesna
AU  - Pavlović, Vladimir B.
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/2370
AB  - In this study, porous macro- and micro-cellular wollastonite-based ceramics was synthesized. A ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as a starting material. After 20 min of ultrasound treatment, and calcination at 250 °C for 30 min, different pore-forming agents were added to the as-obtained powders. Differential thermal analysis was used to determine characteristic temperatures of processes occurring within powders during heating. Based on the obtained results, the sintering regime was set up. The prepared mixtures were pressed into pallets and sintered at 900 °C. During the sintering regime, porous wollastonite-based ceramics was obtained. The phase composition of the sintered samples, as well as the microstructures, were analyzed by using X-ray diffraction and SEM. A two-phase system was detected in all samples, CaSiO3 wollastonite and Ca2SiO4 larnite, and their ratio varied with each pore-forming agent. It was observed that the addition of different pore-forming agents resulted in significantly different microstructures. In a batch test, the influence of pH, the contact time and the initial ion concentration on the adsorption efficiency of As+5, Cr+6and phosphate ions on the synthesized adsorbents were studied. Time-dependent adsorption is best described by the pseudo-second-order kinetic model and the Weber-Morris model, which predict intra-particle diffusion as a rate-controlling step of the overall process. High adsorption capacities, 21.93, 23.88, and 27.29 mg g–1, were obtained for the CaCO3-siloxane-nanocellulose sorbent, and similar/lower capacities were obtained for the CaCO3-siloxane-PMMA and CaCO3-siloxane-cotton wool adsorbents.
PB  - Elsevier
T2  - Ceramics International
T1  - Influence of different pore-forming agents on wollastonite microstructures and adsorption capacities
SP  - 7461
EP  - 7468
VL  - 43
IS  - 10
DO  - 10.1016/j.ceramint.2017.03.021
UR  - https://hdl.handle.net/21.15107/rcub_dais_2370
ER  - 
@article{
author = "Obradović, Nina and Filipović, Suzana and Marković, Smilja and Mitrić, Miodrag and Rusmirović, Jelena and Marinković, Aleksandar and Antić, Vesna and Pavlović, Vladimir B.",
year = "2017",
abstract = "In this study, porous macro- and micro-cellular wollastonite-based ceramics was synthesized. A ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as a starting material. After 20 min of ultrasound treatment, and calcination at 250 °C for 30 min, different pore-forming agents were added to the as-obtained powders. Differential thermal analysis was used to determine characteristic temperatures of processes occurring within powders during heating. Based on the obtained results, the sintering regime was set up. The prepared mixtures were pressed into pallets and sintered at 900 °C. During the sintering regime, porous wollastonite-based ceramics was obtained. The phase composition of the sintered samples, as well as the microstructures, were analyzed by using X-ray diffraction and SEM. A two-phase system was detected in all samples, CaSiO3 wollastonite and Ca2SiO4 larnite, and their ratio varied with each pore-forming agent. It was observed that the addition of different pore-forming agents resulted in significantly different microstructures. In a batch test, the influence of pH, the contact time and the initial ion concentration on the adsorption efficiency of As+5, Cr+6and phosphate ions on the synthesized adsorbents were studied. Time-dependent adsorption is best described by the pseudo-second-order kinetic model and the Weber-Morris model, which predict intra-particle diffusion as a rate-controlling step of the overall process. High adsorption capacities, 21.93, 23.88, and 27.29 mg g–1, were obtained for the CaCO3-siloxane-nanocellulose sorbent, and similar/lower capacities were obtained for the CaCO3-siloxane-PMMA and CaCO3-siloxane-cotton wool adsorbents.",
publisher = "Elsevier",
journal = "Ceramics International",
title = "Influence of different pore-forming agents on wollastonite microstructures and adsorption capacities",
pages = "7461-7468",
volume = "43",
number = "10",
doi = "10.1016/j.ceramint.2017.03.021",
url = "https://hdl.handle.net/21.15107/rcub_dais_2370"
}
Obradović, N., Filipović, S., Marković, S., Mitrić, M., Rusmirović, J., Marinković, A., Antić, V.,& Pavlović, V. B.. (2017). Influence of different pore-forming agents on wollastonite microstructures and adsorption capacities. in Ceramics International
Elsevier., 43(10), 7461-7468.
https://doi.org/10.1016/j.ceramint.2017.03.021
https://hdl.handle.net/21.15107/rcub_dais_2370
Obradović N, Filipović S, Marković S, Mitrić M, Rusmirović J, Marinković A, Antić V, Pavlović VB. Influence of different pore-forming agents on wollastonite microstructures and adsorption capacities. in Ceramics International. 2017;43(10):7461-7468.
doi:10.1016/j.ceramint.2017.03.021
https://hdl.handle.net/21.15107/rcub_dais_2370 .
Obradović, Nina, Filipović, Suzana, Marković, Smilja, Mitrić, Miodrag, Rusmirović, Jelena, Marinković, Aleksandar, Antić, Vesna, Pavlović, Vladimir B., "Influence of different pore-forming agents on wollastonite microstructures and adsorption capacities" in Ceramics International, 43, no. 10 (2017):7461-7468,
https://doi.org/10.1016/j.ceramint.2017.03.021 .,
https://hdl.handle.net/21.15107/rcub_dais_2370 .
13
13
17

Adsorption capacity of wollastonite based adsorbents with porous structure controlled with different progeny agents

Rusmirović, Jelena; Marinković, Aleksandar; Obradović, Nina; Filipović, Suzana; Pavlović, Vladimir B.

(Belgrade : Serbian Ceramic Society, 2016)

TY  - CONF
AU  - Rusmirović, Jelena
AU  - Marinković, Aleksandar
AU  - Obradović, Nina
AU  - Filipović, Suzana
AU  - Pavlović, Vladimir B.
PY  - 2016
UR  - http://dais.sanu.ac.rs/123456789/877
AB  - Porous wollastonite (WL) based adsorbents were fabricated by a pressureless sintering process by using low molecular weight poly(methyl methacrylate) (PMMA), nanocellulose (NC) and yeast as the pore forming agents. WL based adsorbents were synthesized in two step process. In the first step, calcium carbonate and methylhidrogen cyclosiloxane were mixed with isopropyl alcohol, dried and calcined at 250 °C. Second step included WL mixing with porogen, followed by controlled calcination and on that way the sintered materials with randomly distributed pores were obtained. The effectiveness of the synthesis steps as well as material properties, i.e., the pore morphology were determined by FTIR analysis and scanning electron microscopy (SEM), respectively. The pore morphology and adsorption capacity was changed dramatically by changing the pore forming agent. The highest adsorption capacity was obtained when NC was used as the pore forming agent. Obtained materials showed moderate adsorption capacities of 10.56, 8.42 and 11.33 mg/g with respect to As5+, Cr6+ and phosphate, respectively. The con centrations of heavy metal ions were determined by using Ion chromatography coupled with mass spectrometry (ICP-MS).
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade
T1  - Adsorption capacity of wollastonite based adsorbents with porous structure controlled with different progeny agents
SP  - 62
EP  - 63
UR  - https://hdl.handle.net/21.15107/rcub_dais_877
ER  - 
@conference{
author = "Rusmirović, Jelena and Marinković, Aleksandar and Obradović, Nina and Filipović, Suzana and Pavlović, Vladimir B.",
year = "2016",
abstract = "Porous wollastonite (WL) based adsorbents were fabricated by a pressureless sintering process by using low molecular weight poly(methyl methacrylate) (PMMA), nanocellulose (NC) and yeast as the pore forming agents. WL based adsorbents were synthesized in two step process. In the first step, calcium carbonate and methylhidrogen cyclosiloxane were mixed with isopropyl alcohol, dried and calcined at 250 °C. Second step included WL mixing with porogen, followed by controlled calcination and on that way the sintered materials with randomly distributed pores were obtained. The effectiveness of the synthesis steps as well as material properties, i.e., the pore morphology were determined by FTIR analysis and scanning electron microscopy (SEM), respectively. The pore morphology and adsorption capacity was changed dramatically by changing the pore forming agent. The highest adsorption capacity was obtained when NC was used as the pore forming agent. Obtained materials showed moderate adsorption capacities of 10.56, 8.42 and 11.33 mg/g with respect to As5+, Cr6+ and phosphate, respectively. The con centrations of heavy metal ions were determined by using Ion chromatography coupled with mass spectrometry (ICP-MS).",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade",
title = "Adsorption capacity of wollastonite based adsorbents with porous structure controlled with different progeny agents",
pages = "62-63",
url = "https://hdl.handle.net/21.15107/rcub_dais_877"
}
Rusmirović, J., Marinković, A., Obradović, N., Filipović, S.,& Pavlović, V. B.. (2016). Adsorption capacity of wollastonite based adsorbents with porous structure controlled with different progeny agents. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade
Belgrade : Serbian Ceramic Society., 62-63.
https://hdl.handle.net/21.15107/rcub_dais_877
Rusmirović J, Marinković A, Obradović N, Filipović S, Pavlović VB. Adsorption capacity of wollastonite based adsorbents with porous structure controlled with different progeny agents. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade. 2016;:62-63.
https://hdl.handle.net/21.15107/rcub_dais_877 .
Rusmirović, Jelena, Marinković, Aleksandar, Obradović, Nina, Filipović, Suzana, Pavlović, Vladimir B., "Adsorption capacity of wollastonite based adsorbents with porous structure controlled with different progeny agents" in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade (2016):62-63,
https://hdl.handle.net/21.15107/rcub_dais_877 .

Novel amino modified GMA-EGDMA-m-PMMA monolith for efficient cationic pollutant removal

Rusmirović, Jelena; Lević, Steva; Pavlović, Vladimir B.; Marinković, Aleksandar

(Belgrade : Serbian Ceramic Society, 2016)

TY  - CONF
AU  - Rusmirović, Jelena
AU  - Lević, Steva
AU  - Pavlović, Vladimir B.
AU  - Marinković, Aleksandar
PY  - 2016
UR  - http://dais.sanu.ac.rs/123456789/876
AB  - Novel macro/micro-porous monolith material containing surface amino functional groups was developed for efficient cationic pollutant removal. The monolith was prepared by copolymerization process of monomers glycidyl methacrylate (GMA), ethylene glycol dimethacrylate (EGDMA) and modified low molar mass poly(methyl methacrylate) (PMMA). In order to improve mechanical stability of GMA-EGDMA monolith, surface of PMMA was modified with ethanol amine in first step, and introduction of methacryloyl chloride in a second step produced m-PMMA. Synthesized GMA-EGDMA-m-PMMA monolith was modified with poly(ethylene imine) (PEI). The effectiveness of copolymerization, as well as introduction of amino groups via PEI modification were confirmed by FTIR and Raman analyses. The morphological appearance of the synthesized monolith, examined by scanning electron microscopy (SEM), clearly indicates porous structure. The results of textural parameters, i.e. monolith porosity, determined by using liquid saturating method, indicate high degree of porosity. Cationic pollutant removal capacity, cadmium and lead, of 32.0 and 42.5 mg g−1 at 25 °C indicates that this monolith is high efficient. This macro/micro-porous monolith could be a promising adsorbent because of its low-cost synthesis process and excellent performance.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade
T1  - Novel amino modified GMA-EGDMA-m-PMMA monolith for efficient cationic pollutant removal
SP  - 63
EP  - 63
UR  - https://hdl.handle.net/21.15107/rcub_dais_876
ER  - 
@conference{
author = "Rusmirović, Jelena and Lević, Steva and Pavlović, Vladimir B. and Marinković, Aleksandar",
year = "2016",
abstract = "Novel macro/micro-porous monolith material containing surface amino functional groups was developed for efficient cationic pollutant removal. The monolith was prepared by copolymerization process of monomers glycidyl methacrylate (GMA), ethylene glycol dimethacrylate (EGDMA) and modified low molar mass poly(methyl methacrylate) (PMMA). In order to improve mechanical stability of GMA-EGDMA monolith, surface of PMMA was modified with ethanol amine in first step, and introduction of methacryloyl chloride in a second step produced m-PMMA. Synthesized GMA-EGDMA-m-PMMA monolith was modified with poly(ethylene imine) (PEI). The effectiveness of copolymerization, as well as introduction of amino groups via PEI modification were confirmed by FTIR and Raman analyses. The morphological appearance of the synthesized monolith, examined by scanning electron microscopy (SEM), clearly indicates porous structure. The results of textural parameters, i.e. monolith porosity, determined by using liquid saturating method, indicate high degree of porosity. Cationic pollutant removal capacity, cadmium and lead, of 32.0 and 42.5 mg g−1 at 25 °C indicates that this monolith is high efficient. This macro/micro-porous monolith could be a promising adsorbent because of its low-cost synthesis process and excellent performance.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade",
title = "Novel amino modified GMA-EGDMA-m-PMMA monolith for efficient cationic pollutant removal",
pages = "63-63",
url = "https://hdl.handle.net/21.15107/rcub_dais_876"
}
Rusmirović, J., Lević, S., Pavlović, V. B.,& Marinković, A.. (2016). Novel amino modified GMA-EGDMA-m-PMMA monolith for efficient cationic pollutant removal. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade
Belgrade : Serbian Ceramic Society., 63-63.
https://hdl.handle.net/21.15107/rcub_dais_876
Rusmirović J, Lević S, Pavlović VB, Marinković A. Novel amino modified GMA-EGDMA-m-PMMA monolith for efficient cationic pollutant removal. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade. 2016;:63-63.
https://hdl.handle.net/21.15107/rcub_dais_876 .
Rusmirović, Jelena, Lević, Steva, Pavlović, Vladimir B., Marinković, Aleksandar, "Novel amino modified GMA-EGDMA-m-PMMA monolith for efficient cationic pollutant removal" in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade (2016):63-63,
https://hdl.handle.net/21.15107/rcub_dais_876 .