TY  - CONF
AU  - Kuzmanović, Maja
AU  - Milović, Miloš D.
AU  - Vujković, Milica
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13616
AB  - Carbon materials derived from metal organic frameworks (MOF) have shown promising applications including energy storage and conversion, adsorption, gas storage and separation, catalysis, chemical sensing, and solid phase extraction. Here we present carbon materials derived from Al-based MOFs for use as electrodes in multivalent ion supercapacitors. Al MOFs were synthesized through complexation of fumaric acid with aluminum salts. Carbonization process of Al MOFs was followed by removal of Al2O3 via dissolving in NaOH solution. The properties of carbon materials were examined by X-ray diffraction (XRD), Thermogravimetric and Differential thermal analysis (TG/DTA), Fourier Infrared (FTIR) and Raman Spectroscopy, Particle Size Analysis (PSA), Scanning Electron Microscopy (SEM). The charge storage ability of carbon materials were examined in acidic and neutral aqueous solution using Cyclic Voltammetry at scan rates ranging from 5-500 mVs-1.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application X New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 26-27. September 2022.
T1  - Physicochemical and electrochemical characterization of carbon derived from Al- based metal organic framework
SP  - 39
EP  - 39
UR  - https://hdl.handle.net/21.15107/rcub_dais_13616
ER  - 

@conference{
author = "Kuzmanović, Maja and Milović, Miloš D. and Vujković, Milica",
year = "2022",
abstract = "Carbon materials derived from metal organic frameworks (MOF) have shown promising applications including energy storage and conversion, adsorption, gas storage and separation, catalysis, chemical sensing, and solid phase extraction. Here we present carbon materials derived from Al-based MOFs for use as electrodes in multivalent ion supercapacitors. Al MOFs were synthesized through complexation of fumaric acid with aluminum salts. Carbonization process of Al MOFs was followed by removal of Al2O3 via dissolving in NaOH solution. The properties of carbon materials were examined by X-ray diffraction (XRD), Thermogravimetric and Differential thermal analysis (TG/DTA), Fourier Infrared (FTIR) and Raman Spectroscopy, Particle Size Analysis (PSA), Scanning Electron Microscopy (SEM). The charge storage ability of carbon materials were examined in acidic and neutral aqueous solution using Cyclic Voltammetry at scan rates ranging from 5-500 mVs-1.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application X New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 26-27. September 2022.",
title = "Physicochemical and electrochemical characterization of carbon derived from Al- based metal organic framework",
pages = "39-39",
url = "https://hdl.handle.net/21.15107/rcub_dais_13616"
}

Kuzmanović, M., Milović, M. D.,& Vujković, M.. (2022). Physicochemical and electrochemical characterization of carbon derived from Al- based metal organic framework. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application X New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 26-27. September 2022.
Belgrade : Serbian Ceramic Society., 39-39.
https://hdl.handle.net/21.15107/rcub_dais_13616

Kuzmanović M, Milović MD, Vujković M. Physicochemical and electrochemical characterization of carbon derived from Al- based metal organic framework. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application X New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 26-27. September 2022.. 2022;:39-39.
https://hdl.handle.net/21.15107/rcub_dais_13616 .

Kuzmanović, Maja, Milović, Miloš D., Vujković, Milica, "Physicochemical and electrochemical characterization of carbon derived from Al- based metal organic framework" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application X New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 26-27. September 2022. (2022):39-39,
https://hdl.handle.net/21.15107/rcub_dais_13616 .

TY  - JOUR
AU  - Jugović, Dragana
AU  - Milović, Miloš
AU  - Barudžija, Tanja
AU  - Kuzmanović, Maja
AU  - Vujković, Milica
AU  - Mitrić, Miodrag
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13692
AB  - Layered VOPO4·2H2O is synthesized by the sonochemical method. An X-ray powder diffraction is used to examine the crystal structure, while scanning electron microscopy is used to reveal the morphology of the powder. The crystal structure refinement is performed in the P4/nmmZ space group. The electrochemical intercalation of several cations (Na+, Mg2+, Ca2+, and Al3+) in saturated nitrate aqueous solutions is investigated. The most notable reversible activity is found for the cycling in aluminium nitrate aqueous solution in the voltage range from −0.1 to 0.8 V vs. SCE. During the preparation of the electrode, it is observed that the structure is prone to changes that have not been recorded in the literature so far. Namely, the use of conventional binder PVDF in NMP solution deteriorates the structure and lowers the powder’s crystallinity, while the use of Nafion solution causes the rearrangement of the atoms in a new crystal form that can be described in the monoclinic P21/c space group. Consequently, these structural changes affect electrochemical performances. The observed differences in electrochemical performances are a result of structural rearrangements.
PB  - Basel : MDPI
T2  - Materials
T1  - The Influence of a Binder in a Composite Electrode: The Case Study of Vanadyl Phosphate in Aqueous Electrolyte
VL  - 15
IS  - 24
DO  - 10.3390/ma15249041
UR  - https://hdl.handle.net/21.15107/rcub_dais_13692
ER  - 

@article{
author = "Jugović, Dragana and Milović, Miloš and Barudžija, Tanja and Kuzmanović, Maja and Vujković, Milica and Mitrić, Miodrag",
year = "2022",
abstract = "Layered VOPO4·2H2O is synthesized by the sonochemical method. An X-ray powder diffraction is used to examine the crystal structure, while scanning electron microscopy is used to reveal the morphology of the powder. The crystal structure refinement is performed in the P4/nmmZ space group. The electrochemical intercalation of several cations (Na+, Mg2+, Ca2+, and Al3+) in saturated nitrate aqueous solutions is investigated. The most notable reversible activity is found for the cycling in aluminium nitrate aqueous solution in the voltage range from −0.1 to 0.8 V vs. SCE. During the preparation of the electrode, it is observed that the structure is prone to changes that have not been recorded in the literature so far. Namely, the use of conventional binder PVDF in NMP solution deteriorates the structure and lowers the powder’s crystallinity, while the use of Nafion solution causes the rearrangement of the atoms in a new crystal form that can be described in the monoclinic P21/c space group. Consequently, these structural changes affect electrochemical performances. The observed differences in electrochemical performances are a result of structural rearrangements.",
publisher = "Basel : MDPI",
journal = "Materials",
title = "The Influence of a Binder in a Composite Electrode: The Case Study of Vanadyl Phosphate in Aqueous Electrolyte",
volume = "15",
number = "24",
doi = "10.3390/ma15249041",
url = "https://hdl.handle.net/21.15107/rcub_dais_13692"
}

Jugović, D., Milović, M., Barudžija, T., Kuzmanović, M., Vujković, M.,& Mitrić, M.. (2022). The Influence of a Binder in a Composite Electrode: The Case Study of Vanadyl Phosphate in Aqueous Electrolyte. in Materials
Basel : MDPI., 15(24).
https://doi.org/10.3390/ma15249041
https://hdl.handle.net/21.15107/rcub_dais_13692

Jugović D, Milović M, Barudžija T, Kuzmanović M, Vujković M, Mitrić M. The Influence of a Binder in a Composite Electrode: The Case Study of Vanadyl Phosphate in Aqueous Electrolyte. in Materials. 2022;15(24).
doi:10.3390/ma15249041
https://hdl.handle.net/21.15107/rcub_dais_13692 .

Jugović, Dragana, Milović, Miloš, Barudžija, Tanja, Kuzmanović, Maja, Vujković, Milica, Mitrić, Miodrag, "The Influence of a Binder in a Composite Electrode: The Case Study of Vanadyl Phosphate in Aqueous Electrolyte" in Materials, 15, no. 24 (2022),
https://doi.org/10.3390/ma15249041 .,
https://hdl.handle.net/21.15107/rcub_dais_13692 .

TY  - CONF
AU  - Jovanović, Zoran
AU  - Mravik, Željko
AU  - Pejčić, Milica
AU  - Jovanović, Sonja
AU  - Vujković, Milica
AU  - Marković, Smilja
AU  - Bajuk-Bogdanović, Danica
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13592
AB  - Gaining a momentum from newly emerging properties of nanomaterials the further enhancement and integration of various functionalities have been made possible. Also, it became apparent that interaction between nano-objects can provide additional synergy capable of yielding new or significantly improved properties. This particularly applies to the surfaces and interfaces of nanomaterials where the intimate contact between components amplifies possible contributions of interfacial interactions. Since this aspect of interaction-property relation in many nanocomposites is still insufficiently explored, it is of interest to identify to what extent the properties emerge as a result of interaction-based synergy. To address these aspects, we have investigated a nano-composite of graphene oxide (GO) and 12-tungstophosporic acid (WPA) – a combination of materials that are known for the rich “portfolio” of properties. We will present results that contribute to better the understanding of interactions between nano-objects. The results are showing how simple temperature treatment and weight ratio of components is influencing the evolution of surface, structural properties and charge storage properties – all closely connected to interactions between components. Finally, the implications on synthetic approaches and fine-tuning of the functionality of GO/WPA nanocomposites will be discussed from the perspective of the obtained results.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Program and The Book of abstracts / Twenty-third Annual Conference YUCOMAT 2022 & Twelfth World Round Table Conference on Sintering XII WRTCS 2022, Herceg Novi, Montenegro, August 29 - September 2, 2022
T1  - On the contribution of surface chemistry, structure and interactions in GO/WPA nanocomposites for the electrochemical charge storage applications
SP  - 61
EP  - 61
UR  - https://hdl.handle.net/21.15107/rcub_dais_13592
ER  - 

@conference{
author = "Jovanović, Zoran and Mravik, Željko and Pejčić, Milica and Jovanović, Sonja and Vujković, Milica and Marković, Smilja and Bajuk-Bogdanović, Danica",
year = "2022",
abstract = "Gaining a momentum from newly emerging properties of nanomaterials the further enhancement and integration of various functionalities have been made possible. Also, it became apparent that interaction between nano-objects can provide additional synergy capable of yielding new or significantly improved properties. This particularly applies to the surfaces and interfaces of nanomaterials where the intimate contact between components amplifies possible contributions of interfacial interactions. Since this aspect of interaction-property relation in many nanocomposites is still insufficiently explored, it is of interest to identify to what extent the properties emerge as a result of interaction-based synergy. To address these aspects, we have investigated a nano-composite of graphene oxide (GO) and 12-tungstophosporic acid (WPA) – a combination of materials that are known for the rich “portfolio” of properties. We will present results that contribute to better the understanding of interactions between nano-objects. The results are showing how simple temperature treatment and weight ratio of components is influencing the evolution of surface, structural properties and charge storage properties – all closely connected to interactions between components. Finally, the implications on synthetic approaches and fine-tuning of the functionality of GO/WPA nanocomposites will be discussed from the perspective of the obtained results.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Program and The Book of abstracts / Twenty-third Annual Conference YUCOMAT 2022 & Twelfth World Round Table Conference on Sintering XII WRTCS 2022, Herceg Novi, Montenegro, August 29 - September 2, 2022",
title = "On the contribution of surface chemistry, structure and interactions in GO/WPA nanocomposites for the electrochemical charge storage applications",
pages = "61-61",
url = "https://hdl.handle.net/21.15107/rcub_dais_13592"
}

Jovanović, Z., Mravik, Ž., Pejčić, M., Jovanović, S., Vujković, M., Marković, S.,& Bajuk-Bogdanović, D.. (2022). On the contribution of surface chemistry, structure and interactions in GO/WPA nanocomposites for the electrochemical charge storage applications. in Program and The Book of abstracts / Twenty-third Annual Conference YUCOMAT 2022 & Twelfth World Round Table Conference on Sintering XII WRTCS 2022, Herceg Novi, Montenegro, August 29 - September 2, 2022
Belgrade : Materials Research Society of Serbia., 61-61.
https://hdl.handle.net/21.15107/rcub_dais_13592

Jovanović Z, Mravik Ž, Pejčić M, Jovanović S, Vujković M, Marković S, Bajuk-Bogdanović D. On the contribution of surface chemistry, structure and interactions in GO/WPA nanocomposites for the electrochemical charge storage applications. in Program and The Book of abstracts / Twenty-third Annual Conference YUCOMAT 2022 & Twelfth World Round Table Conference on Sintering XII WRTCS 2022, Herceg Novi, Montenegro, August 29 - September 2, 2022. 2022;:61-61.
https://hdl.handle.net/21.15107/rcub_dais_13592 .

Jovanović, Zoran, Mravik, Željko, Pejčić, Milica, Jovanović, Sonja, Vujković, Milica, Marković, Smilja, Bajuk-Bogdanović, Danica, "On the contribution of surface chemistry, structure and interactions in GO/WPA nanocomposites for the electrochemical charge storage applications" in Program and The Book of abstracts / Twenty-third Annual Conference YUCOMAT 2022 & Twelfth World Round Table Conference on Sintering XII WRTCS 2022, Herceg Novi, Montenegro, August 29 - September 2, 2022 (2022):61-61,
https://hdl.handle.net/21.15107/rcub_dais_13592 .

TY  - CONF
AU  - Jovanović, Zoran
AU  - Bajuk-Bogdanović, Danica
AU  - Vujković, Milica
AU  - Mravik, Željko
AU  - Jovanović, Sonja
AU  - Marković, Smilja
AU  - Pejčić, Milica
AU  - Holclajtner Antunović, Ivanka
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13644
AB  - Gaining a momentum from newly emerging properties of nanomaterials the further enhancement and integration of various functionalities have been made possible. Also, it became apparent that interaction between nano-objects can provide additional synergy capable of yielding new or significantly improved properties. This particularly applies to the surfaces and interfaces of nanomaterials where the intimate contact between components amplifies possible contributions of interfacial interactions. Since this aspect of interaction-property relation in many nanocomposites is still insufficiently explored, it is of interest to identify to what extent the properties emerge as a result of interaction-based synergy or a co-action of individual components. To address these aspects, we have investigated a nanocomposite of graphene oxide (GO) and 12-tungstophosporic acid (WPA) – a combination of materials that are known for the rich “portfolio” of properties. In the talk the novel findings will be presented that contribute to better the understanding of interactions between nano-objects and how they contribute to novel properties. The results are showing how simple temperature treatment and weight ratio of components is influencing the evolution of surface, structural properties and charge storage properties – all closely connected to interactions between components. Finally, the implications on synthetic approaches and fine-tuning of the functionality of GO/WPA nanocomposites will be discussed from the perspective of the obtained results.
PB  - Belgrade : University of Belgrade, Faculty of Physical Chemistry
C3  - Contemporary batteries and supercapacitors : COIN2022 : program and book of abstracts / International Symposium Belgrade, June 1-2, 2022
T1  - The Role of Surface Chemistry, Structure and Interactions in the Electrochemical Charge Storage Properties of Graphene Oxide and 12-tungstophoshoric Acid Nanocomposites
SP  - 16
EP  - 16
UR  - https://hdl.handle.net/21.15107/rcub_dais_13644
ER  - 

@conference{
author = "Jovanović, Zoran and Bajuk-Bogdanović, Danica and Vujković, Milica and Mravik, Željko and Jovanović, Sonja and Marković, Smilja and Pejčić, Milica and Holclajtner Antunović, Ivanka",
year = "2022",
abstract = "Gaining a momentum from newly emerging properties of nanomaterials the further enhancement and integration of various functionalities have been made possible. Also, it became apparent that interaction between nano-objects can provide additional synergy capable of yielding new or significantly improved properties. This particularly applies to the surfaces and interfaces of nanomaterials where the intimate contact between components amplifies possible contributions of interfacial interactions. Since this aspect of interaction-property relation in many nanocomposites is still insufficiently explored, it is of interest to identify to what extent the properties emerge as a result of interaction-based synergy or a co-action of individual components. To address these aspects, we have investigated a nanocomposite of graphene oxide (GO) and 12-tungstophosporic acid (WPA) – a combination of materials that are known for the rich “portfolio” of properties. In the talk the novel findings will be presented that contribute to better the understanding of interactions between nano-objects and how they contribute to novel properties. The results are showing how simple temperature treatment and weight ratio of components is influencing the evolution of surface, structural properties and charge storage properties – all closely connected to interactions between components. Finally, the implications on synthetic approaches and fine-tuning of the functionality of GO/WPA nanocomposites will be discussed from the perspective of the obtained results.",
publisher = "Belgrade : University of Belgrade, Faculty of Physical Chemistry",
journal = "Contemporary batteries and supercapacitors : COIN2022 : program and book of abstracts / International Symposium Belgrade, June 1-2, 2022",
title = "The Role of Surface Chemistry, Structure and Interactions in the Electrochemical Charge Storage Properties of Graphene Oxide and 12-tungstophoshoric Acid Nanocomposites",
pages = "16-16",
url = "https://hdl.handle.net/21.15107/rcub_dais_13644"
}

Jovanović, Z., Bajuk-Bogdanović, D., Vujković, M., Mravik, Ž., Jovanović, S., Marković, S., Pejčić, M.,& Holclajtner Antunović, I.. (2022). The Role of Surface Chemistry, Structure and Interactions in the Electrochemical Charge Storage Properties of Graphene Oxide and 12-tungstophoshoric Acid Nanocomposites. in Contemporary batteries and supercapacitors : COIN2022 : program and book of abstracts / International Symposium Belgrade, June 1-2, 2022
Belgrade : University of Belgrade, Faculty of Physical Chemistry., 16-16.
https://hdl.handle.net/21.15107/rcub_dais_13644

Jovanović Z, Bajuk-Bogdanović D, Vujković M, Mravik Ž, Jovanović S, Marković S, Pejčić M, Holclajtner Antunović I. The Role of Surface Chemistry, Structure and Interactions in the Electrochemical Charge Storage Properties of Graphene Oxide and 12-tungstophoshoric Acid Nanocomposites. in Contemporary batteries and supercapacitors : COIN2022 : program and book of abstracts / International Symposium Belgrade, June 1-2, 2022. 2022;:16-16.
https://hdl.handle.net/21.15107/rcub_dais_13644 .

Jovanović, Zoran, Bajuk-Bogdanović, Danica, Vujković, Milica, Mravik, Željko, Jovanović, Sonja, Marković, Smilja, Pejčić, Milica, Holclajtner Antunović, Ivanka, "The Role of Surface Chemistry, Structure and Interactions in the Electrochemical Charge Storage Properties of Graphene Oxide and 12-tungstophoshoric Acid Nanocomposites" in Contemporary batteries and supercapacitors : COIN2022 : program and book of abstracts / International Symposium Belgrade, June 1-2, 2022 (2022):16-16,
https://hdl.handle.net/21.15107/rcub_dais_13644 .

TY  - DATA
AU  - Vujković, Milica
AU  - Mladenović, Dušan
AU  - Milović, Miloš
AU  - Petrović, Tamara
AU  - Bajuk Bogdanović, Danica
AU  - Šljukić Paunković, Biljana
AU  - Mentus, Slavko
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13159
AB  - Fig. S1. Comparative CVs of SVO and SVM/C measured in the narrow voltage window of LiNO3; Fig.S2 Stabilized CVs of SVM/C composite at a low scan rate of 5 mV s -1 in LiNO3 (a) and NaNO3 (b) aqueous electrolytes; Fig.S3. Stabilized CVs of SVM/C composite measured at different scan rates in LiNO3 (left) and NaNO3 (right) aqueous electrolytes; Fig.S4. Comparison of CVs (a) and specific capacity (b) of NaV6O16 and SVM/C samples measured in saturated aqueous LiNO3 solution. Specific capacities are calculated by the integration of the corresponding CVs (anodic scan); Fig.S5. Comparative CVs of SVM/C measured in different aqueous electrolytes at a common scan ate of 20 mVs-1: the second cycle (a) and the twentieth cycle (b); Fig.S6. Specific capacity vs. cycle number of SVM/C sample measured in air-eqilibrated and N2-purged 5M Ca(NO3)2 at a scan rate of 20 mV s-1
PB  - Elsevier BV
T2  - Electrochimica Acta
T1  - Supplementary information for the article:  Jonović, Marko, Jugović, Branimir, Žuža, Milena, Đorđević, Verica, Milašinović, Nikola, Bugarski, Branko, Knežević-Jugović, Zorica, "Immobilization of Horseradish Peroxidase on Magnetite-Alginate Beads to Enable Effective Strong Binding and Enzyme Recycling during Anthraquinone Dyes’ Degradation" in Polymers, 14, no. 13 (2022):2614, https://doi.org/10.3390/polym14132614
VL  - 425
UR  - https://hdl.handle.net/21.15107/rcub_dais_13159
ER  - 

@misc{
author = "Vujković, Milica and Mladenović, Dušan and Milović, Miloš and Petrović, Tamara and Bajuk Bogdanović, Danica and Šljukić Paunković, Biljana and Mentus, Slavko",
year = "2022",
abstract = "Fig. S1. Comparative CVs of SVO and SVM/C measured in the narrow voltage window of LiNO3; Fig.S2 Stabilized CVs of SVM/C composite at a low scan rate of 5 mV s -1 in LiNO3 (a) and NaNO3 (b) aqueous electrolytes; Fig.S3. Stabilized CVs of SVM/C composite measured at different scan rates in LiNO3 (left) and NaNO3 (right) aqueous electrolytes; Fig.S4. Comparison of CVs (a) and specific capacity (b) of NaV6O16 and SVM/C samples measured in saturated aqueous LiNO3 solution. Specific capacities are calculated by the integration of the corresponding CVs (anodic scan); Fig.S5. Comparative CVs of SVM/C measured in different aqueous electrolytes at a common scan ate of 20 mVs-1: the second cycle (a) and the twentieth cycle (b); Fig.S6. Specific capacity vs. cycle number of SVM/C sample measured in air-eqilibrated and N2-purged 5M Ca(NO3)2 at a scan rate of 20 mV s-1",
publisher = "Elsevier BV",
journal = "Electrochimica Acta",
title = "Supplementary information for the article:  Jonović, Marko, Jugović, Branimir, Žuža, Milena, Đorđević, Verica, Milašinović, Nikola, Bugarski, Branko, Knežević-Jugović, Zorica, "Immobilization of Horseradish Peroxidase on Magnetite-Alginate Beads to Enable Effective Strong Binding and Enzyme Recycling during Anthraquinone Dyes’ Degradation" in Polymers, 14, no. 13 (2022):2614, https://doi.org/10.3390/polym14132614",
volume = "425",
url = "https://hdl.handle.net/21.15107/rcub_dais_13159"
}

Vujković, M., Mladenović, D., Milović, M., Petrović, T., Bajuk Bogdanović, D., Šljukić Paunković, B.,& Mentus, S.. (2022). Supplementary information for the article:  Jonović, Marko, Jugović, Branimir, Žuža, Milena, Đorđević, Verica, Milašinović, Nikola, Bugarski, Branko, Knežević-Jugović, Zorica, "Immobilization of Horseradish Peroxidase on Magnetite-Alginate Beads to Enable Effective Strong Binding and Enzyme Recycling during Anthraquinone Dyes’ Degradation" in Polymers, 14, no. 13 (2022):2614, https://doi.org/10.3390/polym14132614. in Electrochimica Acta
Elsevier BV., 425.
https://hdl.handle.net/21.15107/rcub_dais_13159

Vujković M, Mladenović D, Milović M, Petrović T, Bajuk Bogdanović D, Šljukić Paunković B, Mentus S. Supplementary information for the article:  Jonović, Marko, Jugović, Branimir, Žuža, Milena, Đorđević, Verica, Milašinović, Nikola, Bugarski, Branko, Knežević-Jugović, Zorica, "Immobilization of Horseradish Peroxidase on Magnetite-Alginate Beads to Enable Effective Strong Binding and Enzyme Recycling during Anthraquinone Dyes’ Degradation" in Polymers, 14, no. 13 (2022):2614, https://doi.org/10.3390/polym14132614. in Electrochimica Acta. 2022;425.
https://hdl.handle.net/21.15107/rcub_dais_13159 .

Vujković, Milica, Mladenović, Dušan, Milović, Miloš, Petrović, Tamara, Bajuk Bogdanović, Danica, Šljukić Paunković, Biljana, Mentus, Slavko, "Supplementary information for the article:  Jonović, Marko, Jugović, Branimir, Žuža, Milena, Đorđević, Verica, Milašinović, Nikola, Bugarski, Branko, Knežević-Jugović, Zorica, "Immobilization of Horseradish Peroxidase on Magnetite-Alginate Beads to Enable Effective Strong Binding and Enzyme Recycling during Anthraquinone Dyes’ Degradation" in Polymers, 14, no. 13 (2022):2614, https://doi.org/10.3390/polym14132614" in Electrochimica Acta, 425 (2022),
https://hdl.handle.net/21.15107/rcub_dais_13159 .

TY  - CONF
AU  - Petrović, Tamara
AU  - Milović, Miloš
AU  - Gezović, Aleksandra
AU  - Mišurović, Jana
AU  - Grudić, Veselinka
AU  - Vujković, Milica
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13502
AB  - Moving toward the commercialization of safe and sustainable energy storage systems, the research on aqueous rechargeable batteries (ARBs) becomes more intensive. Moreover, development of alternative ARBs based on more abundant and sustainable element chemistry (Na, Mg, Ca, and Zn) has received significant attention. Great efforts for their development started to pay off when an aqueous sodium battery (NaTi2(PO4)3//1 M Na2SO4//Na0.44MnO2) appeared on the market alongside organic rechargeable batteries. In this study, a hybrid full- cell aqueous configuration was made from biomass-derived activated carbon (anode), 5 M aqueous solution of Ca(NO3)2 (electrolyte), and layered CaV2O6 (cathode). A high surface area carbon was synthesized by the simultaneous carbonization and activation of vine shoot- derived biochar at 700 °C under Ar atmosphere (ACvs). CaV2O6 composite with the carbon (CaVO/C) was obtained by the sol-gel complexation method. The charge storage behaviour of ACvs and CaVO/C materials was investigated in the aqueous solution of 5 M Ca(NO3)2 and showed promising results. Not only do materials individually exhibit good electrochemical behaviour, full-cell configuration ACvs700//5 M Ca(NO3)2//CaVO/C displayed improved charge storage (89 mAh g-1 at 100 mA g-1) in comparison to mentioned commercial aqueous NaTi2(PO4)3//1 M Na2SO4//Na0.44MnO2 model (≈50 mAh g-1 at ≈100 mA g-1). These results enrich the existing hybrid aqueous battery design and open up a new research era for Ca-ion batteries.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Programme and the Book of Abstracts / Twentieth Young Researchers' Conference Materials Science and Engineering, November 30 - December 2, 2022, Belgrade, Serbia
T1  - Hybrid aqueous Ca-ion battery: Design and Performance
SP  - 67
EP  - 67
UR  - https://hdl.handle.net/21.15107/rcub_dais_13502
ER  - 

@conference{
author = "Petrović, Tamara and Milović, Miloš and Gezović, Aleksandra and Mišurović, Jana and Grudić, Veselinka and Vujković, Milica",
year = "2022",
abstract = "Moving toward the commercialization of safe and sustainable energy storage systems, the research on aqueous rechargeable batteries (ARBs) becomes more intensive. Moreover, development of alternative ARBs based on more abundant and sustainable element chemistry (Na, Mg, Ca, and Zn) has received significant attention. Great efforts for their development started to pay off when an aqueous sodium battery (NaTi2(PO4)3//1 M Na2SO4//Na0.44MnO2) appeared on the market alongside organic rechargeable batteries. In this study, a hybrid full- cell aqueous configuration was made from biomass-derived activated carbon (anode), 5 M aqueous solution of Ca(NO3)2 (electrolyte), and layered CaV2O6 (cathode). A high surface area carbon was synthesized by the simultaneous carbonization and activation of vine shoot- derived biochar at 700 °C under Ar atmosphere (ACvs). CaV2O6 composite with the carbon (CaVO/C) was obtained by the sol-gel complexation method. The charge storage behaviour of ACvs and CaVO/C materials was investigated in the aqueous solution of 5 M Ca(NO3)2 and showed promising results. Not only do materials individually exhibit good electrochemical behaviour, full-cell configuration ACvs700//5 M Ca(NO3)2//CaVO/C displayed improved charge storage (89 mAh g-1 at 100 mA g-1) in comparison to mentioned commercial aqueous NaTi2(PO4)3//1 M Na2SO4//Na0.44MnO2 model (≈50 mAh g-1 at ≈100 mA g-1). These results enrich the existing hybrid aqueous battery design and open up a new research era for Ca-ion batteries.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Programme and the Book of Abstracts / Twentieth Young Researchers' Conference Materials Science and Engineering, November 30 - December 2, 2022, Belgrade, Serbia",
title = "Hybrid aqueous Ca-ion battery: Design and Performance",
pages = "67-67",
url = "https://hdl.handle.net/21.15107/rcub_dais_13502"
}

Petrović, T., Milović, M., Gezović, A., Mišurović, J., Grudić, V.,& Vujković, M.. (2022). Hybrid aqueous Ca-ion battery: Design and Performance. in Programme and the Book of Abstracts / Twentieth Young Researchers' Conference Materials Science and Engineering, November 30 - December 2, 2022, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 67-67.
https://hdl.handle.net/21.15107/rcub_dais_13502

Petrović T, Milović M, Gezović A, Mišurović J, Grudić V, Vujković M. Hybrid aqueous Ca-ion battery: Design and Performance. in Programme and the Book of Abstracts / Twentieth Young Researchers' Conference Materials Science and Engineering, November 30 - December 2, 2022, Belgrade, Serbia. 2022;:67-67.
https://hdl.handle.net/21.15107/rcub_dais_13502 .

Petrović, Tamara, Milović, Miloš, Gezović, Aleksandra, Mišurović, Jana, Grudić, Veselinka, Vujković, Milica, "Hybrid aqueous Ca-ion battery: Design and Performance" in Programme and the Book of Abstracts / Twentieth Young Researchers' Conference Materials Science and Engineering, November 30 - December 2, 2022, Belgrade, Serbia (2022):67-67,
https://hdl.handle.net/21.15107/rcub_dais_13502 .

TY  - CONF
AU  - Gezović, Aleksandra
AU  - Milović, Miloš
AU  - Bajuk-Bogdanović, Danica
AU  - Grudić, Veselinka
AU  - Mentus, Slavko
AU  - Vujković, Milica
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13594
AB  - The combination of different structural units in the anionic sublattice (PO4–SO4, PO4–NO3, PO4–CO3, etc.) can provide novel mixed polyanionic structures, which matched properties of Li-ion intercalation materials [1]. Mixed polyanion, Na4Fe3(PO4)2P2O7 (NFPP) is of special interest as a cathode for Na-ion batteries [2]. In this study, the simple citric-assisted sol-gel method was used for NFPP/C preparation, with the aim of evaluating its sodium storage capability. When both phosphates and pyrophosphates are used as precursors, the mixed NFPP phase has been successfully obtained, but only if pH is adjusted to the neutral value. Otherwise, when it comes to spontaneous sol-gel reaction (without pH adjustment), the heterostructure Na4Fe3(PO4)2P2O7/Na2FeP2O7 was formed. The obtained polyanions have been examined in terms of the structural, thermal and morphological behaviour by XRD, FTIR, TG/DTA and FESEM. Their electrochemical examination in NaNO3, by cyclic voltammetry and chronopotentiometry, reveals the substantial difference in sodium storage properties of synthesized nanocomposites. While the heterestrocture delivers the specific capacity of around 90 mAh g-1 with a poor rate capability, the mixed phase can rich theoretical capacity of ≈129 mAh g-1 (at a common scan rate), with a high rate capability of ≈80 C.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Program and The Book of abstracts / Twenty-third Annual Conference YUCOMAT 2022 & Twelfth World Round Table Conference on Sintering XII WRTCS 2022, Herceg Novi, Montenegro, August 29 - September 2, 2022
T1  - pH-triggered sol-gel synthesis of Na4Fe3(PO4)2P2O7 cathode material
SP  - 80
EP  - 80
UR  - https://hdl.handle.net/21.15107/rcub_dais_13594
ER  - 

@conference{
author = "Gezović, Aleksandra and Milović, Miloš and Bajuk-Bogdanović, Danica and Grudić, Veselinka and Mentus, Slavko and Vujković, Milica",
year = "2022",
abstract = "The combination of different structural units in the anionic sublattice (PO4–SO4, PO4–NO3, PO4–CO3, etc.) can provide novel mixed polyanionic structures, which matched properties of Li-ion intercalation materials [1]. Mixed polyanion, Na4Fe3(PO4)2P2O7 (NFPP) is of special interest as a cathode for Na-ion batteries [2]. In this study, the simple citric-assisted sol-gel method was used for NFPP/C preparation, with the aim of evaluating its sodium storage capability. When both phosphates and pyrophosphates are used as precursors, the mixed NFPP phase has been successfully obtained, but only if pH is adjusted to the neutral value. Otherwise, when it comes to spontaneous sol-gel reaction (without pH adjustment), the heterostructure Na4Fe3(PO4)2P2O7/Na2FeP2O7 was formed. The obtained polyanions have been examined in terms of the structural, thermal and morphological behaviour by XRD, FTIR, TG/DTA and FESEM. Their electrochemical examination in NaNO3, by cyclic voltammetry and chronopotentiometry, reveals the substantial difference in sodium storage properties of synthesized nanocomposites. While the heterestrocture delivers the specific capacity of around 90 mAh g-1 with a poor rate capability, the mixed phase can rich theoretical capacity of ≈129 mAh g-1 (at a common scan rate), with a high rate capability of ≈80 C.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Program and The Book of abstracts / Twenty-third Annual Conference YUCOMAT 2022 & Twelfth World Round Table Conference on Sintering XII WRTCS 2022, Herceg Novi, Montenegro, August 29 - September 2, 2022",
title = "pH-triggered sol-gel synthesis of Na4Fe3(PO4)2P2O7 cathode material",
pages = "80-80",
url = "https://hdl.handle.net/21.15107/rcub_dais_13594"
}

Gezović, A., Milović, M., Bajuk-Bogdanović, D., Grudić, V., Mentus, S.,& Vujković, M.. (2022). pH-triggered sol-gel synthesis of Na4Fe3(PO4)2P2O7 cathode material. in Program and The Book of abstracts / Twenty-third Annual Conference YUCOMAT 2022 & Twelfth World Round Table Conference on Sintering XII WRTCS 2022, Herceg Novi, Montenegro, August 29 - September 2, 2022
Belgrade : Materials Research Society of Serbia., 80-80.
https://hdl.handle.net/21.15107/rcub_dais_13594

Gezović A, Milović M, Bajuk-Bogdanović D, Grudić V, Mentus S, Vujković M. pH-triggered sol-gel synthesis of Na4Fe3(PO4)2P2O7 cathode material. in Program and The Book of abstracts / Twenty-third Annual Conference YUCOMAT 2022 & Twelfth World Round Table Conference on Sintering XII WRTCS 2022, Herceg Novi, Montenegro, August 29 - September 2, 2022. 2022;:80-80.
https://hdl.handle.net/21.15107/rcub_dais_13594 .

Gezović, Aleksandra, Milović, Miloš, Bajuk-Bogdanović, Danica, Grudić, Veselinka, Mentus, Slavko, Vujković, Milica, "pH-triggered sol-gel synthesis of Na4Fe3(PO4)2P2O7 cathode material" in Program and The Book of abstracts / Twenty-third Annual Conference YUCOMAT 2022 & Twelfth World Round Table Conference on Sintering XII WRTCS 2022, Herceg Novi, Montenegro, August 29 - September 2, 2022 (2022):80-80,
https://hdl.handle.net/21.15107/rcub_dais_13594 .

TY  - CONF
AU  - Vujković, Milica
AU  - Petrović, Tamara
AU  - Mladenović, Dušan
AU  - Milović, Miloš
AU  - Bajuk-Bogdanović, Danica
AU  - Šljukić Paunković, Biljana
AU  - Mentus, Slavko
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13637
AB  - An increased utilization of intermittent renewable energy (wind, solar…) requires the expansion of energy storage/conversion systems to a large scale, which can be integrated with renewable source devices into electrical grid. The state-of-the-art Li-ion batteries present the good choice in terms of energy and power density. However, their massive applications are strongly limited by restricted lithium resources and safety issues. In that context, the research on different alternative battery systems, relying on Earth abundant elements such as Na, Ca, Mg, Al, etc, have been launched, where advanced materials play the central role as electrodes in their operation
PB  - Belgrade : Serbian Academy of Sciences and Arts
C3  - Program & Book of Abstracts / Second International Conference ELMINA 2022, Belgrade, Serbia, August 22nd-26th, 2022
T1  - Sodium-pillared vanadium oxide decorated with carbon particles as electrode material for more sustainable energy storage of the future
SP  - 172
EP  - 173
UR  - https://hdl.handle.net/21.15107/rcub_dais_13637
ER  - 

@conference{
author = "Vujković, Milica and Petrović, Tamara and Mladenović, Dušan and Milović, Miloš and Bajuk-Bogdanović, Danica and Šljukić Paunković, Biljana and Mentus, Slavko",
year = "2022",
abstract = "An increased utilization of intermittent renewable energy (wind, solar…) requires the expansion of energy storage/conversion systems to a large scale, which can be integrated with renewable source devices into electrical grid. The state-of-the-art Li-ion batteries present the good choice in terms of energy and power density. However, their massive applications are strongly limited by restricted lithium resources and safety issues. In that context, the research on different alternative battery systems, relying on Earth abundant elements such as Na, Ca, Mg, Al, etc, have been launched, where advanced materials play the central role as electrodes in their operation",
publisher = "Belgrade : Serbian Academy of Sciences and Arts",
journal = "Program & Book of Abstracts / Second International Conference ELMINA 2022, Belgrade, Serbia, August 22nd-26th, 2022",
title = "Sodium-pillared vanadium oxide decorated with carbon particles as electrode material for more sustainable energy storage of the future",
pages = "172-173",
url = "https://hdl.handle.net/21.15107/rcub_dais_13637"
}

Vujković, M., Petrović, T., Mladenović, D., Milović, M., Bajuk-Bogdanović, D., Šljukić Paunković, B.,& Mentus, S.. (2022). Sodium-pillared vanadium oxide decorated with carbon particles as electrode material for more sustainable energy storage of the future. in Program & Book of Abstracts / Second International Conference ELMINA 2022, Belgrade, Serbia, August 22nd-26th, 2022
Belgrade : Serbian Academy of Sciences and Arts., 172-173.
https://hdl.handle.net/21.15107/rcub_dais_13637

Vujković M, Petrović T, Mladenović D, Milović M, Bajuk-Bogdanović D, Šljukić Paunković B, Mentus S. Sodium-pillared vanadium oxide decorated with carbon particles as electrode material for more sustainable energy storage of the future. in Program & Book of Abstracts / Second International Conference ELMINA 2022, Belgrade, Serbia, August 22nd-26th, 2022. 2022;:172-173.
https://hdl.handle.net/21.15107/rcub_dais_13637 .

Vujković, Milica, Petrović, Tamara, Mladenović, Dušan, Milović, Miloš, Bajuk-Bogdanović, Danica, Šljukić Paunković, Biljana, Mentus, Slavko, "Sodium-pillared vanadium oxide decorated with carbon particles as electrode material for more sustainable energy storage of the future" in Program & Book of Abstracts / Second International Conference ELMINA 2022, Belgrade, Serbia, August 22nd-26th, 2022 (2022):172-173,
https://hdl.handle.net/21.15107/rcub_dais_13637 .

TY  - JOUR
AU  - Vasić, Milica M.
AU  - Milović, Miloš
AU  - Bajuk-Bogdanović, Danica
AU  - Petrović, Tamara
AU  - Vujković, Milica
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13582
AB  - Vanadium-oxide-based materials exist with various vanadium oxidation states having rich chemistry and ability to form layered structures. These properties make them suitable for different applications, including energy conversion and storage. Magnesium vanadium oxide materials obtained using simple preparation route were studied as potential cathodes for rechargeable aqueous magnesium ion batteries. Structural characterization of the synthesized materials was performed using XRD and vibrational spectroscopy techniques (FTIR and Raman spectroscopy). Electrochemical behavior of the materials, observed by cyclic voltammetry, was further explained by BVS calculations. Sluggish Mg2+ ion kinetics in MgV2O6 was shown as a result of poor electronic and ionic wiring. Complex redox behavior of the studied materials is dependent on phase composition and metal ion inserted/deinserted into/from the material. Among the studied magnesium vanadium oxides, the multiphase oxide systems exhibited better Mg2+ insertion/deinsertion performances than the single-phase ones. Carbon addition was found to be an effective dual strategy for enhancing the charge storage behavior of MgV2O6. © 2022 by the authors.
T2  - Nanomaterials
T1  - Simply Prepared Magnesium Vanadium Oxides as Cathode Materials for Rechargeable Aqueous Magnesium Ion Batteries
VL  - 12
IS  - 16
DO  - 10.3390/nano12162767
UR  - https://hdl.handle.net/21.15107/rcub_dais_13582
ER  - 

@article{
author = "Vasić, Milica M. and Milović, Miloš and Bajuk-Bogdanović, Danica and Petrović, Tamara and Vujković, Milica",
year = "2022",
abstract = "Vanadium-oxide-based materials exist with various vanadium oxidation states having rich chemistry and ability to form layered structures. These properties make them suitable for different applications, including energy conversion and storage. Magnesium vanadium oxide materials obtained using simple preparation route were studied as potential cathodes for rechargeable aqueous magnesium ion batteries. Structural characterization of the synthesized materials was performed using XRD and vibrational spectroscopy techniques (FTIR and Raman spectroscopy). Electrochemical behavior of the materials, observed by cyclic voltammetry, was further explained by BVS calculations. Sluggish Mg2+ ion kinetics in MgV2O6 was shown as a result of poor electronic and ionic wiring. Complex redox behavior of the studied materials is dependent on phase composition and metal ion inserted/deinserted into/from the material. Among the studied magnesium vanadium oxides, the multiphase oxide systems exhibited better Mg2+ insertion/deinsertion performances than the single-phase ones. Carbon addition was found to be an effective dual strategy for enhancing the charge storage behavior of MgV2O6. © 2022 by the authors.",
journal = "Nanomaterials",
title = "Simply Prepared Magnesium Vanadium Oxides as Cathode Materials for Rechargeable Aqueous Magnesium Ion Batteries",
volume = "12",
number = "16",
doi = "10.3390/nano12162767",
url = "https://hdl.handle.net/21.15107/rcub_dais_13582"
}

Vasić, M. M., Milović, M., Bajuk-Bogdanović, D., Petrović, T.,& Vujković, M.. (2022). Simply Prepared Magnesium Vanadium Oxides as Cathode Materials for Rechargeable Aqueous Magnesium Ion Batteries. in Nanomaterials, 12(16).
https://doi.org/10.3390/nano12162767
https://hdl.handle.net/21.15107/rcub_dais_13582

Vasić MM, Milović M, Bajuk-Bogdanović D, Petrović T, Vujković M. Simply Prepared Magnesium Vanadium Oxides as Cathode Materials for Rechargeable Aqueous Magnesium Ion Batteries. in Nanomaterials. 2022;12(16).
doi:10.3390/nano12162767
https://hdl.handle.net/21.15107/rcub_dais_13582 .

Vasić, Milica M., Milović, Miloš, Bajuk-Bogdanović, Danica, Petrović, Tamara, Vujković, Milica, "Simply Prepared Magnesium Vanadium Oxides as Cathode Materials for Rechargeable Aqueous Magnesium Ion Batteries" in Nanomaterials, 12, no. 16 (2022),
https://doi.org/10.3390/nano12162767 .,
https://hdl.handle.net/21.15107/rcub_dais_13582 .

TY  - JOUR
AU  - Vujković, Milica
AU  - Mladenović, Dušan
AU  - Milović, Miloš
AU  - Petrović, Tamara
AU  - Bajuk Bogdanović, Danica
AU  - Šljukić Paunković, Biljana
AU  - Mentus, Slavko
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13158
AB  - Layered vanadium oxides are, due to their adaptable interlayer distance and a multivalent state of vanadium, interesting electrode materials for various kinds of metal-ion batteries with both aqueous and nonaqueous electrolytes. In this study, a precursor solution adjusted for hydrothermal synthesis of sodium vanadate Na2V6O16, is modified by addition of carbon nanopowder Vulcan XC72, and this suspension is used for an one-pot hydrothermal synthesis of sodium vanadate/C composite. XRD analysis evidenced that the obtained composite is the mixture of two vanadate phases: Na2V6O16 and NaV6O15, instead of expected single-phase vanadate. SEM and TEM observations of composite revealed that these vanadate phases emerge in a form of both nanowires and nanospheres. The heterogeneity of phases and morphology of the composite is attributed to the directional action of carbon nanoparticles as a nucleation seed. The composite, used in aqueous Li-ion battery with LiFe0.95V0.05PO4/C cathode and LiNO3 electrolyte, displayed improved charge storage (220 mAh g−1 at current rate 150 mA g−1 in the initial discharge), after dc charging, in comparison to NaV6O15 or Na2V6O16 nanowire anodes. Furthermore, versatile insertion capability of this heterostructured composite towards mono (Li+, Na+) and multivalent (Ca2+, Mg2+, Al3+) ions in aqueous electrolytes is demonstrated by Cyclic Voltametry method, where the capacity stability depends on the type of cation, following the order Al3+, Li+, Mg2+, Ca2+. Upon 100 potentiodynamic chaging/discharging cycles, Ca2+ions display much better capacitance retention than Li+ ions (i.e., 64 vs. 13% of the initial value). The coinserted electrolyte constituents, H2O and OH− species, are considered to be responsible for the improved capacity retention, making vanadium ions less strained and less soluble. The pH, the concentration of the electrolyte and the type of anion are found to influence the cyclic behavior of observed vanadate composite in Ca-containing electrolyte. These results open a new directions in vanadate electrochemistry towards more sustainaible and cheaper aqueous batteries.
PB  - Elsevier BV
T2  - Electrochimica Acta
T1  - Sodium-pillared vanadium oxides as next-gen materials: Does co-inserted water control the cyclic stability of vanadates in an aqueous electrolyte?
SP  - 140603
VL  - 425
DO  - 10.1016/j.electacta.2022.140603
UR  - https://hdl.handle.net/21.15107/rcub_dais_13158
ER  - 

@article{
author = "Vujković, Milica and Mladenović, Dušan and Milović, Miloš and Petrović, Tamara and Bajuk Bogdanović, Danica and Šljukić Paunković, Biljana and Mentus, Slavko",
year = "2022",
abstract = "Layered vanadium oxides are, due to their adaptable interlayer distance and a multivalent state of vanadium, interesting electrode materials for various kinds of metal-ion batteries with both aqueous and nonaqueous electrolytes. In this study, a precursor solution adjusted for hydrothermal synthesis of sodium vanadate Na2V6O16, is modified by addition of carbon nanopowder Vulcan XC72, and this suspension is used for an one-pot hydrothermal synthesis of sodium vanadate/C composite. XRD analysis evidenced that the obtained composite is the mixture of two vanadate phases: Na2V6O16 and NaV6O15, instead of expected single-phase vanadate. SEM and TEM observations of composite revealed that these vanadate phases emerge in a form of both nanowires and nanospheres. The heterogeneity of phases and morphology of the composite is attributed to the directional action of carbon nanoparticles as a nucleation seed. The composite, used in aqueous Li-ion battery with LiFe0.95V0.05PO4/C cathode and LiNO3 electrolyte, displayed improved charge storage (220 mAh g−1 at current rate 150 mA g−1 in the initial discharge), after dc charging, in comparison to NaV6O15 or Na2V6O16 nanowire anodes. Furthermore, versatile insertion capability of this heterostructured composite towards mono (Li+, Na+) and multivalent (Ca2+, Mg2+, Al3+) ions in aqueous electrolytes is demonstrated by Cyclic Voltametry method, where the capacity stability depends on the type of cation, following the order Al3+, Li+, Mg2+, Ca2+. Upon 100 potentiodynamic chaging/discharging cycles, Ca2+ions display much better capacitance retention than Li+ ions (i.e., 64 vs. 13% of the initial value). The coinserted electrolyte constituents, H2O and OH− species, are considered to be responsible for the improved capacity retention, making vanadium ions less strained and less soluble. The pH, the concentration of the electrolyte and the type of anion are found to influence the cyclic behavior of observed vanadate composite in Ca-containing electrolyte. These results open a new directions in vanadate electrochemistry towards more sustainaible and cheaper aqueous batteries.",
publisher = "Elsevier BV",
journal = "Electrochimica Acta",
title = "Sodium-pillared vanadium oxides as next-gen materials: Does co-inserted water control the cyclic stability of vanadates in an aqueous electrolyte?",
pages = "140603",
volume = "425",
doi = "10.1016/j.electacta.2022.140603",
url = "https://hdl.handle.net/21.15107/rcub_dais_13158"
}

Vujković, M., Mladenović, D., Milović, M., Petrović, T., Bajuk Bogdanović, D., Šljukić Paunković, B.,& Mentus, S.. (2022). Sodium-pillared vanadium oxides as next-gen materials: Does co-inserted water control the cyclic stability of vanadates in an aqueous electrolyte?. in Electrochimica Acta
Elsevier BV., 425, 140603.
https://doi.org/10.1016/j.electacta.2022.140603
https://hdl.handle.net/21.15107/rcub_dais_13158

Vujković M, Mladenović D, Milović M, Petrović T, Bajuk Bogdanović D, Šljukić Paunković B, Mentus S. Sodium-pillared vanadium oxides as next-gen materials: Does co-inserted water control the cyclic stability of vanadates in an aqueous electrolyte?. in Electrochimica Acta. 2022;425:140603.
doi:10.1016/j.electacta.2022.140603
https://hdl.handle.net/21.15107/rcub_dais_13158 .

Vujković, Milica, Mladenović, Dušan, Milović, Miloš, Petrović, Tamara, Bajuk Bogdanović, Danica, Šljukić Paunković, Biljana, Mentus, Slavko, "Sodium-pillared vanadium oxides as next-gen materials: Does co-inserted water control the cyclic stability of vanadates in an aqueous electrolyte?" in Electrochimica Acta, 425 (2022):140603,
https://doi.org/10.1016/j.electacta.2022.140603 .,
https://hdl.handle.net/21.15107/rcub_dais_13158 .

TY  - JOUR
AU  - Zdolšek, Nikola
AU  - Perović, Ivana
AU  - Brković, Snežana
AU  - Tasić, Gvozden
AU  - Milović, Miloš
AU  - Vujković, Milica
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13693
AB  - The capacitance and operating voltage of supercapacitors as well as their energy density have been increased by development of different materials and electrolytes. In this paper, two strategies, for the first time, were used to improve energy density: Mn3O4- and N-dual doped carbon electrode and aqueous mixture of multivalent ions as electrolyte. Mn3O4- and N-dual doped carbon was prepared by a novel and cost-effective procedure using deep eutectic solvent. XRD, XPS, and FTIR confirmed presence of Mn3O4 and nitrogen, while SEM and EDS elemental mapping showed micrometer-sized nanosheets with uniform distribution of C, O, N, and Mn atoms. Charge storage behavior of carbon was tested in aqueous multivalent-based electrolytes and their mixture (Ca2+-Al3+). Regarding both specific capacitance and workable voltage, the Ca2+-Al3+ mixed electrolyte was found as the best optimal solution. The calcium addition to the Al-electrolyte allows the higher operating voltage than in the case of individual Al(NO3)3 electrolyte while the addition of Al3+ ion in the Ca(NO3)2 electrolyte improves the multivalent-ion charge storage ability of carbon. As a result, the specific energy density of two-electrode Mn3O4@N-doped carbon//Al(NO3)2+Ca(NO3)2//Mn3O4@N-doped carbon supercapacitor (34 Wh kg−1 at 0.1 A g−1) overpasses the reported values obtained for Mn-based carbon supercapacitors using conventional aqueous electrolytes.
PB  - Basel : MDPI
T2  - Materials
T1  - Deep Eutectic Solvent for Facile Synthesis of Mn3O4@N-Doped Carbon for Aqueous Multivalent-Based Supercapacitors: New Concept for Increasing Capacitance and Operating Voltage
VL  - 15
IS  - 23
DO  - 10.3390/ma15238540
UR  - https://hdl.handle.net/21.15107/rcub_dais_13693
ER  - 

@article{
author = "Zdolšek, Nikola and Perović, Ivana and Brković, Snežana and Tasić, Gvozden and Milović, Miloš and Vujković, Milica",
year = "2022",
abstract = "The capacitance and operating voltage of supercapacitors as well as their energy density have been increased by development of different materials and electrolytes. In this paper, two strategies, for the first time, were used to improve energy density: Mn3O4- and N-dual doped carbon electrode and aqueous mixture of multivalent ions as electrolyte. Mn3O4- and N-dual doped carbon was prepared by a novel and cost-effective procedure using deep eutectic solvent. XRD, XPS, and FTIR confirmed presence of Mn3O4 and nitrogen, while SEM and EDS elemental mapping showed micrometer-sized nanosheets with uniform distribution of C, O, N, and Mn atoms. Charge storage behavior of carbon was tested in aqueous multivalent-based electrolytes and their mixture (Ca2+-Al3+). Regarding both specific capacitance and workable voltage, the Ca2+-Al3+ mixed electrolyte was found as the best optimal solution. The calcium addition to the Al-electrolyte allows the higher operating voltage than in the case of individual Al(NO3)3 electrolyte while the addition of Al3+ ion in the Ca(NO3)2 electrolyte improves the multivalent-ion charge storage ability of carbon. As a result, the specific energy density of two-electrode Mn3O4@N-doped carbon//Al(NO3)2+Ca(NO3)2//Mn3O4@N-doped carbon supercapacitor (34 Wh kg−1 at 0.1 A g−1) overpasses the reported values obtained for Mn-based carbon supercapacitors using conventional aqueous electrolytes.",
publisher = "Basel : MDPI",
journal = "Materials",
title = "Deep Eutectic Solvent for Facile Synthesis of Mn3O4@N-Doped Carbon for Aqueous Multivalent-Based Supercapacitors: New Concept for Increasing Capacitance and Operating Voltage",
volume = "15",
number = "23",
doi = "10.3390/ma15238540",
url = "https://hdl.handle.net/21.15107/rcub_dais_13693"
}

Zdolšek, N., Perović, I., Brković, S., Tasić, G., Milović, M.,& Vujković, M.. (2022). Deep Eutectic Solvent for Facile Synthesis of Mn3O4@N-Doped Carbon for Aqueous Multivalent-Based Supercapacitors: New Concept for Increasing Capacitance and Operating Voltage. in Materials
Basel : MDPI., 15(23).
https://doi.org/10.3390/ma15238540
https://hdl.handle.net/21.15107/rcub_dais_13693

Zdolšek N, Perović I, Brković S, Tasić G, Milović M, Vujković M. Deep Eutectic Solvent for Facile Synthesis of Mn3O4@N-Doped Carbon for Aqueous Multivalent-Based Supercapacitors: New Concept for Increasing Capacitance and Operating Voltage. in Materials. 2022;15(23).
doi:10.3390/ma15238540
https://hdl.handle.net/21.15107/rcub_dais_13693 .

Zdolšek, Nikola, Perović, Ivana, Brković, Snežana, Tasić, Gvozden, Milović, Miloš, Vujković, Milica, "Deep Eutectic Solvent for Facile Synthesis of Mn3O4@N-Doped Carbon for Aqueous Multivalent-Based Supercapacitors: New Concept for Increasing Capacitance and Operating Voltage" in Materials, 15, no. 23 (2022),
https://doi.org/10.3390/ma15238540 .,
https://hdl.handle.net/21.15107/rcub_dais_13693 .

TY  - JOUR
AU  - Zdolšek, Nikola
AU  - Janković, Bojan
AU  - Milović, Miloš
AU  - Brković, Snežana
AU  - Krstić, Jugoslav
AU  - Perović, Ivana
AU  - Vujković, Milica
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13511
AB  - The development of carbon materials with desirable textures and new aqueous electrolytes is the key strategy to improve the performance of supercapacitors. Herein, a deep eutectic solvent (DES) was used for in situ templating of a carbon material. A carbon material was characterized (XRD, N2-physisorption, FTIR, SEM and EDS) and used as an electrode material for the first time in multivalent-based supercapacitors. In situ templating of carbon was performed using a novel DES, which serves as a precursor for carbon and for in situ generation of MgO. The generation of MgO and its roles in templating of carbon were discussed. Templating of carbon with MgO lead to an increase in surface area and a microporous texture. The obtained carbon was tested in multivalent-ion (Al3+ and Mg2+) electrolytes and compared with H2SO4. The charge-storage mechanism was investigated and elaborated. The highest specific capacitance was obtained for the Al(NO3)3 electrolyte, while the operating voltage follows the order: Mg(NO3)2 > Al(NO3)3 > H2SO4. Electrical double-layer capacitance (versus pseudocapacitance) was dominant in all investigated electrolytes. The larger operating voltage in multivalent electrolytes is a consequence of the lower fraction of free water, which suppresses hydrogen evolution (when compared with H2SO4). The GCD was experimentally performed on the Al(NO3)3 electrolyte, which showed good cyclic stability, with an energy density of 22.3 Wh kg−1 at 65 W kg−1.
T2  - Batteries
T1  - Deep Eutectic Solvent (DES) for In Situ Templating Carbon Material: Carbon Characterization and Application in Supercapacitors Containing Multivalent Ions
SP  - 284
VL  - 8
IS  - 12
DO  - 10.3390/batteries8120284
UR  - https://hdl.handle.net/21.15107/rcub_dais_13511
ER  - 

@article{
author = "Zdolšek, Nikola and Janković, Bojan and Milović, Miloš and Brković, Snežana and Krstić, Jugoslav and Perović, Ivana and Vujković, Milica",
year = "2022",
abstract = "The development of carbon materials with desirable textures and new aqueous electrolytes is the key strategy to improve the performance of supercapacitors. Herein, a deep eutectic solvent (DES) was used for in situ templating of a carbon material. A carbon material was characterized (XRD, N2-physisorption, FTIR, SEM and EDS) and used as an electrode material for the first time in multivalent-based supercapacitors. In situ templating of carbon was performed using a novel DES, which serves as a precursor for carbon and for in situ generation of MgO. The generation of MgO and its roles in templating of carbon were discussed. Templating of carbon with MgO lead to an increase in surface area and a microporous texture. The obtained carbon was tested in multivalent-ion (Al3+ and Mg2+) electrolytes and compared with H2SO4. The charge-storage mechanism was investigated and elaborated. The highest specific capacitance was obtained for the Al(NO3)3 electrolyte, while the operating voltage follows the order: Mg(NO3)2 > Al(NO3)3 > H2SO4. Electrical double-layer capacitance (versus pseudocapacitance) was dominant in all investigated electrolytes. The larger operating voltage in multivalent electrolytes is a consequence of the lower fraction of free water, which suppresses hydrogen evolution (when compared with H2SO4). The GCD was experimentally performed on the Al(NO3)3 electrolyte, which showed good cyclic stability, with an energy density of 22.3 Wh kg−1 at 65 W kg−1.",
journal = "Batteries",
title = "Deep Eutectic Solvent (DES) for In Situ Templating Carbon Material: Carbon Characterization and Application in Supercapacitors Containing Multivalent Ions",
pages = "284",
volume = "8",
number = "12",
doi = "10.3390/batteries8120284",
url = "https://hdl.handle.net/21.15107/rcub_dais_13511"
}

Zdolšek, N., Janković, B., Milović, M., Brković, S., Krstić, J., Perović, I.,& Vujković, M.. (2022). Deep Eutectic Solvent (DES) for In Situ Templating Carbon Material: Carbon Characterization and Application in Supercapacitors Containing Multivalent Ions. in Batteries, 8(12), 284.
https://doi.org/10.3390/batteries8120284
https://hdl.handle.net/21.15107/rcub_dais_13511

Zdolšek N, Janković B, Milović M, Brković S, Krstić J, Perović I, Vujković M. Deep Eutectic Solvent (DES) for In Situ Templating Carbon Material: Carbon Characterization and Application in Supercapacitors Containing Multivalent Ions. in Batteries. 2022;8(12):284.
doi:10.3390/batteries8120284
https://hdl.handle.net/21.15107/rcub_dais_13511 .

Zdolšek, Nikola, Janković, Bojan, Milović, Miloš, Brković, Snežana, Krstić, Jugoslav, Perović, Ivana, Vujković, Milica, "Deep Eutectic Solvent (DES) for In Situ Templating Carbon Material: Carbon Characterization and Application in Supercapacitors Containing Multivalent Ions" in Batteries, 8, no. 12 (2022):284,
https://doi.org/10.3390/batteries8120284 .,
https://hdl.handle.net/21.15107/rcub_dais_13511 .

TY  - JOUR
AU  - Milović, Miloš
AU  - Jugović, Dragana
AU  - Vujković, Milica
AU  - Kuzmanović, Maja
AU  - Mraković, Ana
AU  - Mitrić, Miodrag
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11635
AB  - The polyanion cathodes for Li-ion batteries, namely LiFePO4, Li2FeP2O7 and Li2FeSiO4, were synthesized by very short high-temperature treatment (approximately several minutes) and subsequent quenching. Methylcellulose—a polymer with thermally driven water solubility—was used as the medium in which the precursor solutions were dispersed prior to high temperature treatment. The methylcellulose pyrolytically decomposes to carbon, thus producing the polyanion material/carbon composites of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C. The obtained powders have reduced crystallinity and significant microstructural characteristics: low crystallite size and notable microstrain. They exhibit stable electrochemical performances in both aqueous and organic electrolyte. The broadening of existing peaks in cyclic voltammetry and/or the emergence of new broad peaks was attributed to the presence of the amorphous phase in the samples. In galvanostatic charge–discharge tests, the materials provided high capacities at low current densities, while the highest rate performance was demonstrated by olivine-phosphate when compared to the other two materials.
PB  - Springer Science and Business Media LLC
T2  - Bulletin of Materials Science
T1  - Towards a green and cost-effective synthesis of polyanionic cathodes: comparative electrochemical behaviour of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C synthesized using methylcellulose matrix
SP  - 144
VL  - 44
IS  - 2
DO  - 10.1007/s12034-021-02397-3
UR  - https://hdl.handle.net/21.15107/rcub_dais_11635
ER  - 

@article{
author = "Milović, Miloš and Jugović, Dragana and Vujković, Milica and Kuzmanović, Maja and Mraković, Ana and Mitrić, Miodrag",
year = "2021",
abstract = "The polyanion cathodes for Li-ion batteries, namely LiFePO4, Li2FeP2O7 and Li2FeSiO4, were synthesized by very short high-temperature treatment (approximately several minutes) and subsequent quenching. Methylcellulose—a polymer with thermally driven water solubility—was used as the medium in which the precursor solutions were dispersed prior to high temperature treatment. The methylcellulose pyrolytically decomposes to carbon, thus producing the polyanion material/carbon composites of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C. The obtained powders have reduced crystallinity and significant microstructural characteristics: low crystallite size and notable microstrain. They exhibit stable electrochemical performances in both aqueous and organic electrolyte. The broadening of existing peaks in cyclic voltammetry and/or the emergence of new broad peaks was attributed to the presence of the amorphous phase in the samples. In galvanostatic charge–discharge tests, the materials provided high capacities at low current densities, while the highest rate performance was demonstrated by olivine-phosphate when compared to the other two materials.",
publisher = "Springer Science and Business Media LLC",
journal = "Bulletin of Materials Science",
title = "Towards a green and cost-effective synthesis of polyanionic cathodes: comparative electrochemical behaviour of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C synthesized using methylcellulose matrix",
pages = "144",
volume = "44",
number = "2",
doi = "10.1007/s12034-021-02397-3",
url = "https://hdl.handle.net/21.15107/rcub_dais_11635"
}

Milović, M., Jugović, D., Vujković, M., Kuzmanović, M., Mraković, A.,& Mitrić, M.. (2021). Towards a green and cost-effective synthesis of polyanionic cathodes: comparative electrochemical behaviour of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C synthesized using methylcellulose matrix. in Bulletin of Materials Science
Springer Science and Business Media LLC., 44(2), 144.
https://doi.org/10.1007/s12034-021-02397-3
https://hdl.handle.net/21.15107/rcub_dais_11635

Milović M, Jugović D, Vujković M, Kuzmanović M, Mraković A, Mitrić M. Towards a green and cost-effective synthesis of polyanionic cathodes: comparative electrochemical behaviour of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C synthesized using methylcellulose matrix. in Bulletin of Materials Science. 2021;44(2):144.
doi:10.1007/s12034-021-02397-3
https://hdl.handle.net/21.15107/rcub_dais_11635 .

Milović, Miloš, Jugović, Dragana, Vujković, Milica, Kuzmanović, Maja, Mraković, Ana, Mitrić, Miodrag, "Towards a green and cost-effective synthesis of polyanionic cathodes: comparative electrochemical behaviour of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C synthesized using methylcellulose matrix" in Bulletin of Materials Science, 44, no. 2 (2021):144,
https://doi.org/10.1007/s12034-021-02397-3 .,
https://hdl.handle.net/21.15107/rcub_dais_11635 .

TY  - JOUR
AU  - Milović, Miloš
AU  - Jugović, Dragana
AU  - Vujković, Milica
AU  - Kuzmanović, Maja
AU  - Mraković, Ana
AU  - Mitrić, Miodrag
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11636
AB  - The polyanion cathodes for Li-ion batteries, namely LiFePO4, Li2FeP2O7 and Li2FeSiO4, were synthesized by very short high-temperature treatment (approximately several minutes) and subsequent quenching. Methylcellulose—a polymer with thermally driven water solubility—was used as the medium in which the precursor solutions were dispersed prior to high temperature treatment. The methylcellulose pyrolytically decomposes to carbon, thus producing the polyanion material/carbon composites of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C. The obtained powders have reduced crystallinity and significant microstructural characteristics: low crystallite size and notable microstrain. They exhibit stable electrochemical performances in both aqueous and organic electrolyte. The broadening of existing peaks in cyclic voltammetry and/or the emergence of new broad peaks was attributed to the presence of the amorphous phase in the samples. In galvanostatic charge–discharge tests, the materials provided high capacities at low current densities, while the highest rate performance was demonstrated by olivine-phosphate when compared to the other two materials.
PB  - Springer Science and Business Media LLC
T2  - Bulletin of Materials Science
T1  - Towards a green and cost-effective synthesis of polyanionic cathodes: comparative electrochemical behaviour of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C synthesized using methylcellulose matrix
SP  - 144
VL  - 44
IS  - 2
DO  - 10.1007/s12034-021-02397-3
UR  - https://hdl.handle.net/21.15107/rcub_dais_11636
ER  - 

@article{
author = "Milović, Miloš and Jugović, Dragana and Vujković, Milica and Kuzmanović, Maja and Mraković, Ana and Mitrić, Miodrag",
year = "2021",
abstract = "The polyanion cathodes for Li-ion batteries, namely LiFePO4, Li2FeP2O7 and Li2FeSiO4, were synthesized by very short high-temperature treatment (approximately several minutes) and subsequent quenching. Methylcellulose—a polymer with thermally driven water solubility—was used as the medium in which the precursor solutions were dispersed prior to high temperature treatment. The methylcellulose pyrolytically decomposes to carbon, thus producing the polyanion material/carbon composites of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C. The obtained powders have reduced crystallinity and significant microstructural characteristics: low crystallite size and notable microstrain. They exhibit stable electrochemical performances in both aqueous and organic electrolyte. The broadening of existing peaks in cyclic voltammetry and/or the emergence of new broad peaks was attributed to the presence of the amorphous phase in the samples. In galvanostatic charge–discharge tests, the materials provided high capacities at low current densities, while the highest rate performance was demonstrated by olivine-phosphate when compared to the other two materials.",
publisher = "Springer Science and Business Media LLC",
journal = "Bulletin of Materials Science",
title = "Towards a green and cost-effective synthesis of polyanionic cathodes: comparative electrochemical behaviour of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C synthesized using methylcellulose matrix",
pages = "144",
volume = "44",
number = "2",
doi = "10.1007/s12034-021-02397-3",
url = "https://hdl.handle.net/21.15107/rcub_dais_11636"
}

Milović, M., Jugović, D., Vujković, M., Kuzmanović, M., Mraković, A.,& Mitrić, M.. (2021). Towards a green and cost-effective synthesis of polyanionic cathodes: comparative electrochemical behaviour of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C synthesized using methylcellulose matrix. in Bulletin of Materials Science
Springer Science and Business Media LLC., 44(2), 144.
https://doi.org/10.1007/s12034-021-02397-3
https://hdl.handle.net/21.15107/rcub_dais_11636

Milović M, Jugović D, Vujković M, Kuzmanović M, Mraković A, Mitrić M. Towards a green and cost-effective synthesis of polyanionic cathodes: comparative electrochemical behaviour of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C synthesized using methylcellulose matrix. in Bulletin of Materials Science. 2021;44(2):144.
doi:10.1007/s12034-021-02397-3
https://hdl.handle.net/21.15107/rcub_dais_11636 .

Milović, Miloš, Jugović, Dragana, Vujković, Milica, Kuzmanović, Maja, Mraković, Ana, Mitrić, Miodrag, "Towards a green and cost-effective synthesis of polyanionic cathodes: comparative electrochemical behaviour of LiFePO4/C, Li2FeP2O7/C and Li2FeSiO4/C synthesized using methylcellulose matrix" in Bulletin of Materials Science, 44, no. 2 (2021):144,
https://doi.org/10.1007/s12034-021-02397-3 .,
https://hdl.handle.net/21.15107/rcub_dais_11636 .

TY  - JOUR
AU  - Gezović, Aleksandra
AU  - Vujković, Milica
AU  - Milović, Miloš
AU  - Grudić, Veselinka
AU  - Dominko, Robert
AU  - Mentus, Slavko
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11632
AB  - Sodium ion batteries (SIB) present one of the most perspective post lithium technology and their progress strongly depends on the development of compounds having the structure which enables fast sodium insertion/deinsertion reactions. Polyanion compounds have been widely investigated as cathode materials for SIBs where they compete effectively to the usually used layered oxides. This survey is focused on the development of specific family of isostructural polyanion phases encompassed by the common chemical formula Na4M3(PO4)2(P2O7). The comprehensive retrospective of their synthesis procedures, the kinetics and mechanism of sodiation/desodiation reactions, based on both experimental and theoretical results, is provided. First, the review summarizes the structural properties of variety of Na4M3(PO4)2(P2O7) compounds in terms of its electrical, vibrational and surface properties. Then, the synthesis methods and sodium/lithium storage performance, of each type of Na4M3(PO4)2(P2O7) compounds, are chronologically presented and discussed. Finally, the strengths and weaknesses of these mixed polyanion cathodes are outlined, with the aim to explain some discrepancies and unclarified issues encountered in the literature. Besides, this survey will make room for future development. It can be very useful for the future design of high-performance mixed polyanionic compounds as cathodes for alkaline-ion rechargeable batteries.
PB  - Elsevier BV
T2  - Energy Storage Materials
T1  - Recent developments of Na4M3(PO4)2(P2O7) as the cathode material for alkaline-ion rechargeable batteries: challenges and outlook
SP  - 243
EP  - 273
VL  - 37
DO  - 10.1016/j.ensm.2021.02.011
UR  - https://hdl.handle.net/21.15107/rcub_dais_11632
ER  - 

@article{
author = "Gezović, Aleksandra and Vujković, Milica and Milović, Miloš and Grudić, Veselinka and Dominko, Robert and Mentus, Slavko",
year = "2021",
abstract = "Sodium ion batteries (SIB) present one of the most perspective post lithium technology and their progress strongly depends on the development of compounds having the structure which enables fast sodium insertion/deinsertion reactions. Polyanion compounds have been widely investigated as cathode materials for SIBs where they compete effectively to the usually used layered oxides. This survey is focused on the development of specific family of isostructural polyanion phases encompassed by the common chemical formula Na4M3(PO4)2(P2O7). The comprehensive retrospective of their synthesis procedures, the kinetics and mechanism of sodiation/desodiation reactions, based on both experimental and theoretical results, is provided. First, the review summarizes the structural properties of variety of Na4M3(PO4)2(P2O7) compounds in terms of its electrical, vibrational and surface properties. Then, the synthesis methods and sodium/lithium storage performance, of each type of Na4M3(PO4)2(P2O7) compounds, are chronologically presented and discussed. Finally, the strengths and weaknesses of these mixed polyanion cathodes are outlined, with the aim to explain some discrepancies and unclarified issues encountered in the literature. Besides, this survey will make room for future development. It can be very useful for the future design of high-performance mixed polyanionic compounds as cathodes for alkaline-ion rechargeable batteries.",
publisher = "Elsevier BV",
journal = "Energy Storage Materials",
title = "Recent developments of Na4M3(PO4)2(P2O7) as the cathode material for alkaline-ion rechargeable batteries: challenges and outlook",
pages = "243-273",
volume = "37",
doi = "10.1016/j.ensm.2021.02.011",
url = "https://hdl.handle.net/21.15107/rcub_dais_11632"
}

Gezović, A., Vujković, M., Milović, M., Grudić, V., Dominko, R.,& Mentus, S.. (2021). Recent developments of Na4M3(PO4)2(P2O7) as the cathode material for alkaline-ion rechargeable batteries: challenges and outlook. in Energy Storage Materials
Elsevier BV., 37, 243-273.
https://doi.org/10.1016/j.ensm.2021.02.011
https://hdl.handle.net/21.15107/rcub_dais_11632

Gezović A, Vujković M, Milović M, Grudić V, Dominko R, Mentus S. Recent developments of Na4M3(PO4)2(P2O7) as the cathode material for alkaline-ion rechargeable batteries: challenges and outlook. in Energy Storage Materials. 2021;37:243-273.
doi:10.1016/j.ensm.2021.02.011
https://hdl.handle.net/21.15107/rcub_dais_11632 .

Gezović, Aleksandra, Vujković, Milica, Milović, Miloš, Grudić, Veselinka, Dominko, Robert, Mentus, Slavko, "Recent developments of Na4M3(PO4)2(P2O7) as the cathode material for alkaline-ion rechargeable batteries: challenges and outlook" in Energy Storage Materials, 37 (2021):243-273,
https://doi.org/10.1016/j.ensm.2021.02.011 .,
https://hdl.handle.net/21.15107/rcub_dais_11632 .

TY  - JOUR
AU  - Gezović, Aleksandra
AU  - Vujković, Milica
AU  - Milović, Miloš
AU  - Grudić, Veselinka
AU  - Dominko, Robert
AU  - Mentus, Slavko
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11633
AB  - Sodium ion batteries (SIB) present one of the most perspective post lithium technology and their progress strongly depends on the development of compounds having the structure which enables fast sodium insertion/deinsertion reactions. Polyanion compounds have been widely investigated as cathode materials for SIBs where they compete effectively to the usually used layered oxides. This survey is focused on the development of specific family of isostructural polyanion phases encompassed by the common chemical formula Na4M3(PO4)2(P2O7). The comprehensive retrospective of their synthesis procedures, the kinetics and mechanism of sodiation/desodiation reactions, based on both experimental and theoretical results, is provided. First, the review summarizes the structural properties of variety of Na4M3(PO4)2(P2O7) compounds in terms of its electrical, vibrational and surface properties. Then, the synthesis methods and sodium/lithium storage performance, of each type of Na4M3(PO4)2(P2O7) compounds, are chronologically presented and discussed. Finally, the strengths and weaknesses of these mixed polyanion cathodes are outlined, with the aim to explain some discrepancies and unclarified issues encountered in the literature. Besides, this survey will make room for future development. It can be very useful for the future design of high-performance mixed polyanionic compounds as cathodes for alkaline-ion rechargeable batteries.
PB  - Elsevier BV
T2  - Energy Storage Materials
T1  - Recent developments of Na4M3(PO4)2(P2O7) as the cathode material for alkaline-ion rechargeable batteries: challenges and outlook
SP  - 243
EP  - 273
VL  - 37
DO  - 10.1016/j.ensm.2021.02.011
UR  - https://hdl.handle.net/21.15107/rcub_dais_11633
ER  - 

@article{
author = "Gezović, Aleksandra and Vujković, Milica and Milović, Miloš and Grudić, Veselinka and Dominko, Robert and Mentus, Slavko",
year = "2021",
abstract = "Sodium ion batteries (SIB) present one of the most perspective post lithium technology and their progress strongly depends on the development of compounds having the structure which enables fast sodium insertion/deinsertion reactions. Polyanion compounds have been widely investigated as cathode materials for SIBs where they compete effectively to the usually used layered oxides. This survey is focused on the development of specific family of isostructural polyanion phases encompassed by the common chemical formula Na4M3(PO4)2(P2O7). The comprehensive retrospective of their synthesis procedures, the kinetics and mechanism of sodiation/desodiation reactions, based on both experimental and theoretical results, is provided. First, the review summarizes the structural properties of variety of Na4M3(PO4)2(P2O7) compounds in terms of its electrical, vibrational and surface properties. Then, the synthesis methods and sodium/lithium storage performance, of each type of Na4M3(PO4)2(P2O7) compounds, are chronologically presented and discussed. Finally, the strengths and weaknesses of these mixed polyanion cathodes are outlined, with the aim to explain some discrepancies and unclarified issues encountered in the literature. Besides, this survey will make room for future development. It can be very useful for the future design of high-performance mixed polyanionic compounds as cathodes for alkaline-ion rechargeable batteries.",
publisher = "Elsevier BV",
journal = "Energy Storage Materials",
title = "Recent developments of Na4M3(PO4)2(P2O7) as the cathode material for alkaline-ion rechargeable batteries: challenges and outlook",
pages = "243-273",
volume = "37",
doi = "10.1016/j.ensm.2021.02.011",
url = "https://hdl.handle.net/21.15107/rcub_dais_11633"
}

Gezović, A., Vujković, M., Milović, M., Grudić, V., Dominko, R.,& Mentus, S.. (2021). Recent developments of Na4M3(PO4)2(P2O7) as the cathode material for alkaline-ion rechargeable batteries: challenges and outlook. in Energy Storage Materials
Elsevier BV., 37, 243-273.
https://doi.org/10.1016/j.ensm.2021.02.011
https://hdl.handle.net/21.15107/rcub_dais_11633

Gezović A, Vujković M, Milović M, Grudić V, Dominko R, Mentus S. Recent developments of Na4M3(PO4)2(P2O7) as the cathode material for alkaline-ion rechargeable batteries: challenges and outlook. in Energy Storage Materials. 2021;37:243-273.
doi:10.1016/j.ensm.2021.02.011
https://hdl.handle.net/21.15107/rcub_dais_11633 .

Gezović, Aleksandra, Vujković, Milica, Milović, Miloš, Grudić, Veselinka, Dominko, Robert, Mentus, Slavko, "Recent developments of Na4M3(PO4)2(P2O7) as the cathode material for alkaline-ion rechargeable batteries: challenges and outlook" in Energy Storage Materials, 37 (2021):243-273,
https://doi.org/10.1016/j.ensm.2021.02.011 .,
https://hdl.handle.net/21.15107/rcub_dais_11633 .

TY  - DATA
AU  - Gezović, Aleksandra
AU  - Vujković, Milica
AU  - Milović, Miloš
AU  - Grudić, Veselinka
AU  - Dominko, Robert
AU  - Mentus, Slavko
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11634
AB  - Sodium ion batteries (SIB) present one of the most perspective post lithium technology and their progress strongly depends on the development of compounds having the structure which enables fast sodium insertion/deinsertion reactions. Polyanion compounds have been widely investigated as cathode materials for SIBs where they compete effectively to the usually used layered oxides. This survey is focused on the development of specific family of isostructural polyanion phases encompassed by the common chemical formula Na4M3(PO4)2(P2O7). The comprehensive retrospective of their synthesis procedures, the kinetics and mechanism of sodiation/desodiation reactions, based on both experimental and theoretical results, is provided. First, the review summarizes the structural properties of variety of Na4M3(PO4)2(P2O7) compounds in terms of its electrical, vibrational and surface properties. Then, the synthesis methods and sodium/lithium storage performance, of each type of Na4M3(PO4)2(P2O7) compounds, are chronologically presented and discussed. Finally, the strengths and weaknesses of these mixed polyanion cathodes are outlined, with the aim to explain some discrepancies and unclarified issues encountered in the literature. Besides, this survey will make room for future development. It can be very useful for the future design of high-performance mixed polyanionic compounds as cathodes for alkaline-ion rechargeable batteries.
PB  - Elsevier BV
T2  - Energy Storage Materials
T1  - Supplementary information for the article: Gezović Aleksandra, Vujković Milica, Milović Miloš, Grudić Veselinka, Dominko Robert, Mentus Slavko, "Recent developments of Na4M3(PO4)2(P2O7) as the cathode material for alkaline-ion rechargeable batteries: challenges and outlook" Energy Storage Materials, 37 (2021):243-273, https://doi.org/10.1016/j.ensm.2021.02.011
VL  - 37
UR  - https://hdl.handle.net/21.15107/rcub_dais_11634
ER  - 

@misc{
author = "Gezović, Aleksandra and Vujković, Milica and Milović, Miloš and Grudić, Veselinka and Dominko, Robert and Mentus, Slavko",
year = "2021",
abstract = "Sodium ion batteries (SIB) present one of the most perspective post lithium technology and their progress strongly depends on the development of compounds having the structure which enables fast sodium insertion/deinsertion reactions. Polyanion compounds have been widely investigated as cathode materials for SIBs where they compete effectively to the usually used layered oxides. This survey is focused on the development of specific family of isostructural polyanion phases encompassed by the common chemical formula Na4M3(PO4)2(P2O7). The comprehensive retrospective of their synthesis procedures, the kinetics and mechanism of sodiation/desodiation reactions, based on both experimental and theoretical results, is provided. First, the review summarizes the structural properties of variety of Na4M3(PO4)2(P2O7) compounds in terms of its electrical, vibrational and surface properties. Then, the synthesis methods and sodium/lithium storage performance, of each type of Na4M3(PO4)2(P2O7) compounds, are chronologically presented and discussed. Finally, the strengths and weaknesses of these mixed polyanion cathodes are outlined, with the aim to explain some discrepancies and unclarified issues encountered in the literature. Besides, this survey will make room for future development. It can be very useful for the future design of high-performance mixed polyanionic compounds as cathodes for alkaline-ion rechargeable batteries.",
publisher = "Elsevier BV",
journal = "Energy Storage Materials",
title = "Supplementary information for the article: Gezović Aleksandra, Vujković Milica, Milović Miloš, Grudić Veselinka, Dominko Robert, Mentus Slavko, "Recent developments of Na4M3(PO4)2(P2O7) as the cathode material for alkaline-ion rechargeable batteries: challenges and outlook" Energy Storage Materials, 37 (2021):243-273, https://doi.org/10.1016/j.ensm.2021.02.011",
volume = "37",
url = "https://hdl.handle.net/21.15107/rcub_dais_11634"
}

Gezović, A., Vujković, M., Milović, M., Grudić, V., Dominko, R.,& Mentus, S.. (2021). Supplementary information for the article: Gezović Aleksandra, Vujković Milica, Milović Miloš, Grudić Veselinka, Dominko Robert, Mentus Slavko, "Recent developments of Na4M3(PO4)2(P2O7) as the cathode material for alkaline-ion rechargeable batteries: challenges and outlook" Energy Storage Materials, 37 (2021):243-273, https://doi.org/10.1016/j.ensm.2021.02.011. in Energy Storage Materials
Elsevier BV., 37.
https://hdl.handle.net/21.15107/rcub_dais_11634

Gezović A, Vujković M, Milović M, Grudić V, Dominko R, Mentus S. Supplementary information for the article: Gezović Aleksandra, Vujković Milica, Milović Miloš, Grudić Veselinka, Dominko Robert, Mentus Slavko, "Recent developments of Na4M3(PO4)2(P2O7) as the cathode material for alkaline-ion rechargeable batteries: challenges and outlook" Energy Storage Materials, 37 (2021):243-273, https://doi.org/10.1016/j.ensm.2021.02.011. in Energy Storage Materials. 2021;37.
https://hdl.handle.net/21.15107/rcub_dais_11634 .

Gezović, Aleksandra, Vujković, Milica, Milović, Miloš, Grudić, Veselinka, Dominko, Robert, Mentus, Slavko, "Supplementary information for the article: Gezović Aleksandra, Vujković Milica, Milović Miloš, Grudić Veselinka, Dominko Robert, Mentus Slavko, "Recent developments of Na4M3(PO4)2(P2O7) as the cathode material for alkaline-ion rechargeable batteries: challenges and outlook" Energy Storage Materials, 37 (2021):243-273, https://doi.org/10.1016/j.ensm.2021.02.011" in Energy Storage Materials, 37 (2021),
https://hdl.handle.net/21.15107/rcub_dais_11634 .

TY  - JOUR
AU  - Milović, Miloš
AU  - Vujković, Milica
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11645
AB  - Electrochemical and structural properties of LiV2O5 cathode were investigated. Obtained by solid state reaction at high temperature the material crystallized as gamma polymorph phase, γ-LiV2O5. The gamma structure provides two crystallographic sites to accommodate lithium ions, Li1 and Li2 position. Lithium insertion at these two sites occurs at two respective voltages versus lithium metal: ~3.6 V (Li1) and ~2.4 V (Li2). Intercalation at Li1 position is reversible in both organic and aqueous electrolyte and provides stable cycling performance at the high voltage. On the contrary, sluggish insertion/removal of Li+ at Li2 sites causes unstable performance and significant storage capacity fade at lower voltages. Lithium diffusion 3d landscape was determined by bond valence calculations applied on the γ-LiV2O5 phase, as well as on the metastable phases of γ′-V2O5 and ζ-Li2V2O5 that exist at high and low voltages respectively. The model was proposed based on inactivity of Li2 position of the metastable ζ-Li2V2O5 phase which provides explanation for the observed storage capacity loss at low voltages.
PB  - Elsevier BV
T2  - Ceramics International
T1  - Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode
SP  - 17077
EP  - 17083
VL  - 47
IS  - 12
DO  - 10.1016/j.ceramint.2021.03.016
UR  - https://hdl.handle.net/21.15107/rcub_dais_11645
ER  - 

@article{
author = "Milović, Miloš and Vujković, Milica and Jugović, Dragana and Mitrić, Miodrag",
year = "2021",
abstract = "Electrochemical and structural properties of LiV2O5 cathode were investigated. Obtained by solid state reaction at high temperature the material crystallized as gamma polymorph phase, γ-LiV2O5. The gamma structure provides two crystallographic sites to accommodate lithium ions, Li1 and Li2 position. Lithium insertion at these two sites occurs at two respective voltages versus lithium metal: ~3.6 V (Li1) and ~2.4 V (Li2). Intercalation at Li1 position is reversible in both organic and aqueous electrolyte and provides stable cycling performance at the high voltage. On the contrary, sluggish insertion/removal of Li+ at Li2 sites causes unstable performance and significant storage capacity fade at lower voltages. Lithium diffusion 3d landscape was determined by bond valence calculations applied on the γ-LiV2O5 phase, as well as on the metastable phases of γ′-V2O5 and ζ-Li2V2O5 that exist at high and low voltages respectively. The model was proposed based on inactivity of Li2 position of the metastable ζ-Li2V2O5 phase which provides explanation for the observed storage capacity loss at low voltages.",
publisher = "Elsevier BV",
journal = "Ceramics International",
title = "Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode",
pages = "17077-17083",
volume = "47",
number = "12",
doi = "10.1016/j.ceramint.2021.03.016",
url = "https://hdl.handle.net/21.15107/rcub_dais_11645"
}

Milović, M., Vujković, M., Jugović, D.,& Mitrić, M.. (2021). Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode. in Ceramics International
Elsevier BV., 47(12), 17077-17083.
https://doi.org/10.1016/j.ceramint.2021.03.016
https://hdl.handle.net/21.15107/rcub_dais_11645

Milović M, Vujković M, Jugović D, Mitrić M. Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode. in Ceramics International. 2021;47(12):17077-17083.
doi:10.1016/j.ceramint.2021.03.016
https://hdl.handle.net/21.15107/rcub_dais_11645 .

Milović, Miloš, Vujković, Milica, Jugović, Dragana, Mitrić, Miodrag, "Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode" in Ceramics International, 47, no. 12 (2021):17077-17083,
https://doi.org/10.1016/j.ceramint.2021.03.016 .,
https://hdl.handle.net/21.15107/rcub_dais_11645 .

TY  - DATA
AU  - Milović, Miloš
AU  - Vujković, Milica
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11646
AB  - Figure S1. Particle size distribution by number (blue) and by volume (red) of the as prepared powder of LiV2O5; 2. Ex-situ X-ray diffraction analysis; Figure S2. XRD patterns of the as prepared electrode before cycling (black line) and of electrodes in discharged state after cycling in aqueous (red) and in organic electrolyte (blue); a: whole pattern, b: 002 reflection
PB  - Elsevier BV
T2  - Ceramics International
T1  - Supplementary information for the article: Milović Miloš, Vujković Milica, Jugović Dragana, Mitrić Miodrag, "Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode" Ceramics International, 47, no. 12 (2021):17077-17083, https://doi.org/10.1016/j.ceramint.2021.03.016
VL  - 47
IS  - 12
UR  - https://hdl.handle.net/21.15107/rcub_dais_11646
ER  - 

@misc{
author = "Milović, Miloš and Vujković, Milica and Jugović, Dragana and Mitrić, Miodrag",
year = "2021",
abstract = "Figure S1. Particle size distribution by number (blue) and by volume (red) of the as prepared powder of LiV2O5; 2. Ex-situ X-ray diffraction analysis; Figure S2. XRD patterns of the as prepared electrode before cycling (black line) and of electrodes in discharged state after cycling in aqueous (red) and in organic electrolyte (blue); a: whole pattern, b: 002 reflection",
publisher = "Elsevier BV",
journal = "Ceramics International",
title = "Supplementary information for the article: Milović Miloš, Vujković Milica, Jugović Dragana, Mitrić Miodrag, "Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode" Ceramics International, 47, no. 12 (2021):17077-17083, https://doi.org/10.1016/j.ceramint.2021.03.016",
volume = "47",
number = "12",
url = "https://hdl.handle.net/21.15107/rcub_dais_11646"
}

Milović, M., Vujković, M., Jugović, D.,& Mitrić, M.. (2021). Supplementary information for the article: Milović Miloš, Vujković Milica, Jugović Dragana, Mitrić Miodrag, "Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode" Ceramics International, 47, no. 12 (2021):17077-17083, https://doi.org/10.1016/j.ceramint.2021.03.016. in Ceramics International
Elsevier BV., 47(12).
https://hdl.handle.net/21.15107/rcub_dais_11646

Milović M, Vujković M, Jugović D, Mitrić M. Supplementary information for the article: Milović Miloš, Vujković Milica, Jugović Dragana, Mitrić Miodrag, "Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode" Ceramics International, 47, no. 12 (2021):17077-17083, https://doi.org/10.1016/j.ceramint.2021.03.016. in Ceramics International. 2021;47(12).
https://hdl.handle.net/21.15107/rcub_dais_11646 .

Milović, Miloš, Vujković, Milica, Jugović, Dragana, Mitrić, Miodrag, "Supplementary information for the article: Milović Miloš, Vujković Milica, Jugović Dragana, Mitrić Miodrag, "Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode" Ceramics International, 47, no. 12 (2021):17077-17083, https://doi.org/10.1016/j.ceramint.2021.03.016" in Ceramics International, 47, no. 12 (2021),
https://hdl.handle.net/21.15107/rcub_dais_11646 .

TY  - JOUR
AU  - Milović, Miloš
AU  - Vujković, Milica
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11655
AB  - Electrochemical and structural properties of LiV2O5 cathode were investigated. Obtained by solid state reaction at high temperature the material crystallized as gamma polymorph phase, γ-LiV2O5. The gamma structure provides two crystallographic sites to accommodate lithium ions, Li1 and Li2 position. Lithium insertion at these two sites occurs at two respective voltages versus lithium metal: ~3.6 V (Li1) and ~2.4 V (Li2). Intercalation at Li1 position is reversible in both organic and aqueous electrolyte and provides stable cycling performance at the high voltage. On the contrary, sluggish insertion/removal of Li+ at Li2 sites causes unstable performance and significant storage capacity fade at lower voltages. Lithium diffusion 3d landscape was determined by bond valence calculations applied on the γ-LiV2O5 phase, as well as on the metastable phases of γ′-V2O5 and ζ-Li2V2O5 that exist at high and low voltages respectively. The model was proposed based on inactivity of Li2 position of the metastable ζ-Li2V2O5 phase which provides explanation for the observed storage capacity loss at low voltages.
PB  - Elsevier BV
T2  - Ceramics International
T1  - Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode
SP  - 17077
EP  - 17083
VL  - 47
IS  - 12
DO  - 10.1016/j.ceramint.2021.03.016
UR  - https://hdl.handle.net/21.15107/rcub_dais_11655
ER  - 

@article{
author = "Milović, Miloš and Vujković, Milica and Jugović, Dragana and Mitrić, Miodrag",
year = "2021",
abstract = "Electrochemical and structural properties of LiV2O5 cathode were investigated. Obtained by solid state reaction at high temperature the material crystallized as gamma polymorph phase, γ-LiV2O5. The gamma structure provides two crystallographic sites to accommodate lithium ions, Li1 and Li2 position. Lithium insertion at these two sites occurs at two respective voltages versus lithium metal: ~3.6 V (Li1) and ~2.4 V (Li2). Intercalation at Li1 position is reversible in both organic and aqueous electrolyte and provides stable cycling performance at the high voltage. On the contrary, sluggish insertion/removal of Li+ at Li2 sites causes unstable performance and significant storage capacity fade at lower voltages. Lithium diffusion 3d landscape was determined by bond valence calculations applied on the γ-LiV2O5 phase, as well as on the metastable phases of γ′-V2O5 and ζ-Li2V2O5 that exist at high and low voltages respectively. The model was proposed based on inactivity of Li2 position of the metastable ζ-Li2V2O5 phase which provides explanation for the observed storage capacity loss at low voltages.",
publisher = "Elsevier BV",
journal = "Ceramics International",
title = "Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode",
pages = "17077-17083",
volume = "47",
number = "12",
doi = "10.1016/j.ceramint.2021.03.016",
url = "https://hdl.handle.net/21.15107/rcub_dais_11655"
}

Milović, M., Vujković, M., Jugović, D.,& Mitrić, M.. (2021). Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode. in Ceramics International
Elsevier BV., 47(12), 17077-17083.
https://doi.org/10.1016/j.ceramint.2021.03.016
https://hdl.handle.net/21.15107/rcub_dais_11655

Milović M, Vujković M, Jugović D, Mitrić M. Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode. in Ceramics International. 2021;47(12):17077-17083.
doi:10.1016/j.ceramint.2021.03.016
https://hdl.handle.net/21.15107/rcub_dais_11655 .

Milović, Miloš, Vujković, Milica, Jugović, Dragana, Mitrić, Miodrag, "Electrochemical and structural study on cycling performance of γ-LiV2O5 cathode" in Ceramics International, 47, no. 12 (2021):17077-17083,
https://doi.org/10.1016/j.ceramint.2021.03.016 .,
https://hdl.handle.net/21.15107/rcub_dais_11655 .

TY  - CONF
AU  - Milović, Miloš
AU  - Vujković, Milica
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11896
AB  - For its capability to reversibly remove and insert lithium ions in the range of 0 ≤ x ≤ 1.4, gamma polymorph phase of LixV2O5 makes a solid candidate for cathode application in rechargeable batteries. Accommodation of lithium in concentrations higher than x ≈1.4 brings stability issues related to the transformation towards the metastable ζ phase, which significantly limits utilization of higher capacities the material could achieve. The presented investigation has been conducted on γ-LiV2O5 powder obtained via solid state reaction at high temperatures. Structural refinement of the prepared γ phase has been carried out. Based on bond valence analysis of γ as well as of metastable γ’ and ζ phase, which occur at low and high lithium concentrations, respectively, mechanism is proposed for the observed capacity decrease. Electrochemical characteristics of γ-LiV2O5 were investigated in both aqueous and organic electrolyte in the voltage range 4-2.3 V vs. Li+/Li in order to record performances of all three occurring phases, γ and both lithium poor γ’ (high voltage region) and lithium rich ζ (low voltage region). Ionic exchange of Li+ with Mg2+, Ca2+ and Al3+ in their respective aqueous electrolytes has been conducted to examine potential use of the material in the postlithium rechargeable batteries.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
T1  - Structural and electrochemical properties of gamma LiV2O5 cathode
SP  - 84
EP  - 84
UR  - https://hdl.handle.net/21.15107/rcub_dais_11896
ER  - 

@conference{
author = "Milović, Miloš and Vujković, Milica and Jugović, Dragana and Mitrić, Miodrag",
year = "2021",
abstract = "For its capability to reversibly remove and insert lithium ions in the range of 0 ≤ x ≤ 1.4, gamma polymorph phase of LixV2O5 makes a solid candidate for cathode application in rechargeable batteries. Accommodation of lithium in concentrations higher than x ≈1.4 brings stability issues related to the transformation towards the metastable ζ phase, which significantly limits utilization of higher capacities the material could achieve. The presented investigation has been conducted on γ-LiV2O5 powder obtained via solid state reaction at high temperatures. Structural refinement of the prepared γ phase has been carried out. Based on bond valence analysis of γ as well as of metastable γ’ and ζ phase, which occur at low and high lithium concentrations, respectively, mechanism is proposed for the observed capacity decrease. Electrochemical characteristics of γ-LiV2O5 were investigated in both aqueous and organic electrolyte in the voltage range 4-2.3 V vs. Li+/Li in order to record performances of all three occurring phases, γ and both lithium poor γ’ (high voltage region) and lithium rich ζ (low voltage region). Ionic exchange of Li+ with Mg2+, Ca2+ and Al3+ in their respective aqueous electrolytes has been conducted to examine potential use of the material in the postlithium rechargeable batteries.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021",
title = "Structural and electrochemical properties of gamma LiV2O5 cathode",
pages = "84-84",
url = "https://hdl.handle.net/21.15107/rcub_dais_11896"
}

Milović, M., Vujković, M., Jugović, D.,& Mitrić, M.. (2021). Structural and electrochemical properties of gamma LiV2O5 cathode. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
Belgrade : Serbian Ceramic Society., 84-84.
https://hdl.handle.net/21.15107/rcub_dais_11896

Milović M, Vujković M, Jugović D, Mitrić M. Structural and electrochemical properties of gamma LiV2O5 cathode. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021. 2021;:84-84.
https://hdl.handle.net/21.15107/rcub_dais_11896 .

Milović, Miloš, Vujković, Milica, Jugović, Dragana, Mitrić, Miodrag, "Structural and electrochemical properties of gamma LiV2O5 cathode" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021 (2021):84-84,
https://hdl.handle.net/21.15107/rcub_dais_11896 .

TY  - CONF
AU  - Milović, Miloš
AU  - Vujković, Milica
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12095
AB  - The electrochemical insertion of lithium ions in V2O5 produces various crystal structures depending on lithium concentration. Compositions with lithium content in the range of 1 ≤ x ≤ 1.8 take orthorhombic γ-LixV2O5 form. γ-LixV2O5 is capable to accommodate more than one lithium ion per formula unit and therefore interesting to be used as a cathode of lithium-ion battery. Here are
presented electrochemical performances of γ-LiV2O5 obtained through solid-state reaction. Before galvanostatic cycling the as-synthesized powder is characterized by X-ray powder diffraction, field emission scanning electron microscopy, and FTIR spectroscopy. The crystal structure of the powder is refined in the orthorhombic Pbnm space group. During galvanostatic cycling in a large potential window capacity decrease is observed. In order to reveal the origin of capacity decay the bond valence analysis was performed. It provided a model of lithium diffusion network for the γ-LixV2O5 phase, as well as for the end members obtained at low and high voltages.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and the Book of abstracts / Twenty-second Annual Conference YUCOMAT 2021 Herceg Novi, Montenegro, August 30 - September 3, 2021
T1  - Reversible intercalation/deintercalation of lithium ions within γ-LiV2O5 polymorph
SP  - 44
EP  - 44
UR  - https://hdl.handle.net/21.15107/rcub_dais_12095
ER  - 

@conference{
author = "Milović, Miloš and Vujković, Milica and Jugović, Dragana and Mitrić, Miodrag",
year = "2021",
abstract = "The electrochemical insertion of lithium ions in V2O5 produces various crystal structures depending on lithium concentration. Compositions with lithium content in the range of 1 ≤ x ≤ 1.8 take orthorhombic γ-LixV2O5 form. γ-LixV2O5 is capable to accommodate more than one lithium ion per formula unit and therefore interesting to be used as a cathode of lithium-ion battery. Here are
presented electrochemical performances of γ-LiV2O5 obtained through solid-state reaction. Before galvanostatic cycling the as-synthesized powder is characterized by X-ray powder diffraction, field emission scanning electron microscopy, and FTIR spectroscopy. The crystal structure of the powder is refined in the orthorhombic Pbnm space group. During galvanostatic cycling in a large potential window capacity decrease is observed. In order to reveal the origin of capacity decay the bond valence analysis was performed. It provided a model of lithium diffusion network for the γ-LixV2O5 phase, as well as for the end members obtained at low and high voltages.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and the Book of abstracts / Twenty-second Annual Conference YUCOMAT 2021 Herceg Novi, Montenegro, August 30 - September 3, 2021",
title = "Reversible intercalation/deintercalation of lithium ions within γ-LiV2O5 polymorph",
pages = "44-44",
url = "https://hdl.handle.net/21.15107/rcub_dais_12095"
}

Milović, M., Vujković, M., Jugović, D.,& Mitrić, M.. (2021). Reversible intercalation/deintercalation of lithium ions within γ-LiV2O5 polymorph. in Programme and the Book of abstracts / Twenty-second Annual Conference YUCOMAT 2021 Herceg Novi, Montenegro, August 30 - September 3, 2021
Belgrade : Materials Research Society of Serbia., 44-44.
https://hdl.handle.net/21.15107/rcub_dais_12095

Milović M, Vujković M, Jugović D, Mitrić M. Reversible intercalation/deintercalation of lithium ions within γ-LiV2O5 polymorph. in Programme and the Book of abstracts / Twenty-second Annual Conference YUCOMAT 2021 Herceg Novi, Montenegro, August 30 - September 3, 2021. 2021;:44-44.
https://hdl.handle.net/21.15107/rcub_dais_12095 .

Milović, Miloš, Vujković, Milica, Jugović, Dragana, Mitrić, Miodrag, "Reversible intercalation/deintercalation of lithium ions within γ-LiV2O5 polymorph" in Programme and the Book of abstracts / Twenty-second Annual Conference YUCOMAT 2021 Herceg Novi, Montenegro, August 30 - September 3, 2021 (2021):44-44,
https://hdl.handle.net/21.15107/rcub_dais_12095 .

TY  - CONF
AU  - Petrović, Tamara
AU  - Milović, Miloš
AU  - Bajuk Bogdanović, Danica
AU  - Vujković, Milica
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12275
AB  - While the world is facing a higher demand for lithium, its limited resources associated with the high price, are becoming problematic. Other crucial drawbacks of Li-ion batteries are their toxicity and safety concerns. Therefore, researchers are oriented towards development of non-Li batteries based on eco-friendly and earth-abundant materials to overcome drawbacks of Li-ion technology. Alternative abundant metals and their ions such as Mg and Ca could be a good choice for rechargeable batteries in terms of cost and eco-friendliness. Mg2+ and Ca2+ ions could transfer two electrons per redox process which theoretically has a positive effect on battery performance. The materials upon which multivalent ions will intercalate with fast diffusion rate are hard to find. Metal vanadium oxide (MxVyOz) materials become promising materials for rechargeable batteries, so herein, a standard sol-gel combustion route was used for the preparation of the CaV2O6 layered precursor. Two samples are synthesized from the vanadate precursor, the first when it was heated at 400 °C (CaVO) and the second when CaVO was integrated with 10 wt % of sucrose under thermal treatment at 400 °C, in Ar atmosphere (CaVO/C). Obtained CaVO and CaVO/C powders were thoroughly characterized by XRD, TG-DTA, FTIR, and Raman spectroscopy. The electrochemical performance of the obtained samples was evaluated for multivalent-ion storage in saturated aqueous electrolytic solutions of Mg (NO3)2 and Ca (NO3)2 by cyclic voltammetry and chronopotentiometry. For comparison, measurements were also done in saturated LiNO3. Results indicated that CaVO can store more Li+ ions than Mg2+ and Ca2+ ions, but CaVO in LiNO3 shows a substantial loss of capacity upon cycling, which is not observed in the case of Mg (NO3)2 and Ca (NO3)2. On the other hand, CaVO/C composite showed a significant improvement for Ca an Mg storage capacity, which exceeded capacity storage of Li+ ions. The high and stable discharge capacity of CaVO/C, amounting to 89.3 mA h g−1 at 0.5 A g-1, was obtained in Ca (NO3)2. Obtained results are promising and open novel directions regarding the use of CaV2O6 for multivalent rechargeable batteries, especially for Ca-ion batteries.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of abstracts / Nineteenth Young Researchers' Conference Materials Science and Engineering, December 1-3, 2021, Belgrade, Serbia
T1  - Layered CaV2O6 as promising electrode material for multivalent storage
SP  - 53
EP  - 53
UR  - https://hdl.handle.net/21.15107/rcub_dais_12275
ER  - 

@conference{
author = "Petrović, Tamara and Milović, Miloš and Bajuk Bogdanović, Danica and Vujković, Milica",
year = "2021",
abstract = "While the world is facing a higher demand for lithium, its limited resources associated with the high price, are becoming problematic. Other crucial drawbacks of Li-ion batteries are their toxicity and safety concerns. Therefore, researchers are oriented towards development of non-Li batteries based on eco-friendly and earth-abundant materials to overcome drawbacks of Li-ion technology. Alternative abundant metals and their ions such as Mg and Ca could be a good choice for rechargeable batteries in terms of cost and eco-friendliness. Mg2+ and Ca2+ ions could transfer two electrons per redox process which theoretically has a positive effect on battery performance. The materials upon which multivalent ions will intercalate with fast diffusion rate are hard to find. Metal vanadium oxide (MxVyOz) materials become promising materials for rechargeable batteries, so herein, a standard sol-gel combustion route was used for the preparation of the CaV2O6 layered precursor. Two samples are synthesized from the vanadate precursor, the first when it was heated at 400 °C (CaVO) and the second when CaVO was integrated with 10 wt % of sucrose under thermal treatment at 400 °C, in Ar atmosphere (CaVO/C). Obtained CaVO and CaVO/C powders were thoroughly characterized by XRD, TG-DTA, FTIR, and Raman spectroscopy. The electrochemical performance of the obtained samples was evaluated for multivalent-ion storage in saturated aqueous electrolytic solutions of Mg (NO3)2 and Ca (NO3)2 by cyclic voltammetry and chronopotentiometry. For comparison, measurements were also done in saturated LiNO3. Results indicated that CaVO can store more Li+ ions than Mg2+ and Ca2+ ions, but CaVO in LiNO3 shows a substantial loss of capacity upon cycling, which is not observed in the case of Mg (NO3)2 and Ca (NO3)2. On the other hand, CaVO/C composite showed a significant improvement for Ca an Mg storage capacity, which exceeded capacity storage of Li+ ions. The high and stable discharge capacity of CaVO/C, amounting to 89.3 mA h g−1 at 0.5 A g-1, was obtained in Ca (NO3)2. Obtained results are promising and open novel directions regarding the use of CaV2O6 for multivalent rechargeable batteries, especially for Ca-ion batteries.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of abstracts / Nineteenth Young Researchers' Conference Materials Science and Engineering, December 1-3, 2021, Belgrade, Serbia",
title = "Layered CaV2O6 as promising electrode material for multivalent storage",
pages = "53-53",
url = "https://hdl.handle.net/21.15107/rcub_dais_12275"
}

Petrović, T., Milović, M., Bajuk Bogdanović, D.,& Vujković, M.. (2021). Layered CaV2O6 as promising electrode material for multivalent storage. in Program and the Book of abstracts / Nineteenth Young Researchers' Conference Materials Science and Engineering, December 1-3, 2021, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 53-53.
https://hdl.handle.net/21.15107/rcub_dais_12275

Petrović T, Milović M, Bajuk Bogdanović D, Vujković M. Layered CaV2O6 as promising electrode material for multivalent storage. in Program and the Book of abstracts / Nineteenth Young Researchers' Conference Materials Science and Engineering, December 1-3, 2021, Belgrade, Serbia. 2021;:53-53.
https://hdl.handle.net/21.15107/rcub_dais_12275 .

Petrović, Tamara, Milović, Miloš, Bajuk Bogdanović, Danica, Vujković, Milica, "Layered CaV2O6 as promising electrode material for multivalent storage" in Program and the Book of abstracts / Nineteenth Young Researchers' Conference Materials Science and Engineering, December 1-3, 2021, Belgrade, Serbia (2021):53-53,
https://hdl.handle.net/21.15107/rcub_dais_12275 .

TY  - CONF
AU  - Vasić, Milica M.
AU  - Milović, Miloš
AU  - Bajuk Bogdanović, Danica
AU  - Vujković, Milica
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12278
AB  - Although today widely used in electronic devices and electric vehicles, lithium ion batteries encounter problem of future application, resulting from limited Li resources, relatively high costs and operational safety problems. Rechargeable magnesium batteries as a potential alternative to the Li-ion ones stand out because of their high theoretical specific capacity, high abundance of Mg resources, atmospheric stability, safety of handling, eco friendliness and low cost. Layered materials including oxides, sulphides and selenides are promising candidates for host materials for Mg2+ storage in rechargeable magnesium batteries. Slow migration of Mg2+ in the layered oxides, ascribed to the strong interaction between Mg and neighbouring O atoms, inspires researchers to look for the ways of improving their electrochemical performance. In this work, Mg-V-O material was synthesized by simple precipitation method, followed by thermal annealing. The obtained material is single-phase material consisted of MgV2O6 phase, according to the results of XRD, FTIR and Raman spectroscopy. Electrochemical test by cyclic voltammetry in aqueous solution revealed redox peaks corresponding to the insertion/deinsertion of Mg2+ ions into/from the material, but with poor current densities. In order to improve the electrochemical performance of the simply prepared Mg-V-O material, carbon was integrated with the Mg-V-O by sucrose-assisted thermal treatment. Although composed of several phases, the obtained Mg-V-O/C material exhibited around 40 times higher maximal specific current values of Mg2+ insertion/deinsertion than the Mg-V-O. Also, the electrochemical performance of the Mg-VO/ C for the insertion/deinsertion of Mg2+ ions was better than those of Al3+ and Li+ ions.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of abstracts / Nineteenth Young Researchers' Conference Materials Science and Engineering, December 1-3, 2021, Belgrade, Serbia
T1  - Simply prepared Mg-V-O as potential cathode material for rechargeable aqueous magnesium ion batteries
SP  - 52
EP  - 52
UR  - https://hdl.handle.net/21.15107/rcub_dais_12278
ER  - 

@conference{
author = "Vasić, Milica M. and Milović, Miloš and Bajuk Bogdanović, Danica and Vujković, Milica",
year = "2021",
abstract = "Although today widely used in electronic devices and electric vehicles, lithium ion batteries encounter problem of future application, resulting from limited Li resources, relatively high costs and operational safety problems. Rechargeable magnesium batteries as a potential alternative to the Li-ion ones stand out because of their high theoretical specific capacity, high abundance of Mg resources, atmospheric stability, safety of handling, eco friendliness and low cost. Layered materials including oxides, sulphides and selenides are promising candidates for host materials for Mg2+ storage in rechargeable magnesium batteries. Slow migration of Mg2+ in the layered oxides, ascribed to the strong interaction between Mg and neighbouring O atoms, inspires researchers to look for the ways of improving their electrochemical performance. In this work, Mg-V-O material was synthesized by simple precipitation method, followed by thermal annealing. The obtained material is single-phase material consisted of MgV2O6 phase, according to the results of XRD, FTIR and Raman spectroscopy. Electrochemical test by cyclic voltammetry in aqueous solution revealed redox peaks corresponding to the insertion/deinsertion of Mg2+ ions into/from the material, but with poor current densities. In order to improve the electrochemical performance of the simply prepared Mg-V-O material, carbon was integrated with the Mg-V-O by sucrose-assisted thermal treatment. Although composed of several phases, the obtained Mg-V-O/C material exhibited around 40 times higher maximal specific current values of Mg2+ insertion/deinsertion than the Mg-V-O. Also, the electrochemical performance of the Mg-VO/ C for the insertion/deinsertion of Mg2+ ions was better than those of Al3+ and Li+ ions.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of abstracts / Nineteenth Young Researchers' Conference Materials Science and Engineering, December 1-3, 2021, Belgrade, Serbia",
title = "Simply prepared Mg-V-O as potential cathode material for rechargeable aqueous magnesium ion batteries",
pages = "52-52",
url = "https://hdl.handle.net/21.15107/rcub_dais_12278"
}

Vasić, M. M., Milović, M., Bajuk Bogdanović, D.,& Vujković, M.. (2021). Simply prepared Mg-V-O as potential cathode material for rechargeable aqueous magnesium ion batteries. in Program and the Book of abstracts / Nineteenth Young Researchers' Conference Materials Science and Engineering, December 1-3, 2021, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 52-52.
https://hdl.handle.net/21.15107/rcub_dais_12278

Vasić MM, Milović M, Bajuk Bogdanović D, Vujković M. Simply prepared Mg-V-O as potential cathode material for rechargeable aqueous magnesium ion batteries. in Program and the Book of abstracts / Nineteenth Young Researchers' Conference Materials Science and Engineering, December 1-3, 2021, Belgrade, Serbia. 2021;:52-52.
https://hdl.handle.net/21.15107/rcub_dais_12278 .

Vasić, Milica M., Milović, Miloš, Bajuk Bogdanović, Danica, Vujković, Milica, "Simply prepared Mg-V-O as potential cathode material for rechargeable aqueous magnesium ion batteries" in Program and the Book of abstracts / Nineteenth Young Researchers' Conference Materials Science and Engineering, December 1-3, 2021, Belgrade, Serbia (2021):52-52,
https://hdl.handle.net/21.15107/rcub_dais_12278 .

TY  - JOUR
AU  - Jovanović, Zoran
AU  - Mravik, Željko
AU  - Bajuk Bogdanović, Danica
AU  - Jovanović, Sonja
AU  - Marković, Smilja
AU  - Vujković, Milica
AU  - Kovač, Janez
AU  - Vengust, Damjan
AU  - Uskoković-Marković, Snežana
AU  - Holclajtner Antunović, Ivanka
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/6882
AB  - In the present study we investigated the interaction between 12-tungstophosphoric acid (WPA) and graphene oxide (GO) in their nanocomposite by utilizing the loading of WPA as an intrinsic parameter for interaction tuning. The Fourier-transform infrared spectroscopy, temperature-programmed desorption, X-ray photoelectron spectroscopy, zeta-potential measurements, thermogravimetric analysis, X-ray diffraction, Raman spectroscopy and transmission electron microscopy methods revealed that ∼5–13 wt% of WPA represents critical loading that separates two distinct contributions to GO-WPA interaction. This was explained by the self-limiting nature of GO-WPA interaction, initially controlled by high dispersion of WPA on GO (up to 13 wt%), that is eventually overpowered by WPA-WPA interaction as loading increases. As a result, the WPA agglomerates are being formed because of which the hybrid character of the nanocomposite diminishes, i.e., the properties of independent components start to be manifested to greater extent. The obtained results provide an important framework for considering possible outcomes in other 2D-0D systems, whose interaction is relevant both from fundamental and applicative point of view. Thus, the GO/WPA nanocomposite illustrates how the interactions between the components can be used for tuning the properties of nanocomposite as a whole.
T2  - Carbon
T1  - Self-limiting interactions in 2D–0D system: A case study of graphene oxide and 12-tungstophosphoric acid nanocomposite
SP  - 166
EP  - 178
VL  - 156
DO  - 10.1016/j.carbon.2019.09.072
UR  - https://hdl.handle.net/21.15107/rcub_dais_6882
ER  - 

@article{
author = "Jovanović, Zoran and Mravik, Željko and Bajuk Bogdanović, Danica and Jovanović, Sonja and Marković, Smilja and Vujković, Milica and Kovač, Janez and Vengust, Damjan and Uskoković-Marković, Snežana and Holclajtner Antunović, Ivanka",
year = "2020",
abstract = "In the present study we investigated the interaction between 12-tungstophosphoric acid (WPA) and graphene oxide (GO) in their nanocomposite by utilizing the loading of WPA as an intrinsic parameter for interaction tuning. The Fourier-transform infrared spectroscopy, temperature-programmed desorption, X-ray photoelectron spectroscopy, zeta-potential measurements, thermogravimetric analysis, X-ray diffraction, Raman spectroscopy and transmission electron microscopy methods revealed that ∼5–13 wt% of WPA represents critical loading that separates two distinct contributions to GO-WPA interaction. This was explained by the self-limiting nature of GO-WPA interaction, initially controlled by high dispersion of WPA on GO (up to 13 wt%), that is eventually overpowered by WPA-WPA interaction as loading increases. As a result, the WPA agglomerates are being formed because of which the hybrid character of the nanocomposite diminishes, i.e., the properties of independent components start to be manifested to greater extent. The obtained results provide an important framework for considering possible outcomes in other 2D-0D systems, whose interaction is relevant both from fundamental and applicative point of view. Thus, the GO/WPA nanocomposite illustrates how the interactions between the components can be used for tuning the properties of nanocomposite as a whole.",
journal = "Carbon",
title = "Self-limiting interactions in 2D–0D system: A case study of graphene oxide and 12-tungstophosphoric acid nanocomposite",
pages = "166-178",
volume = "156",
doi = "10.1016/j.carbon.2019.09.072",
url = "https://hdl.handle.net/21.15107/rcub_dais_6882"
}

Jovanović, Z., Mravik, Ž., Bajuk Bogdanović, D., Jovanović, S., Marković, S., Vujković, M., Kovač, J., Vengust, D., Uskoković-Marković, S.,& Holclajtner Antunović, I.. (2020). Self-limiting interactions in 2D–0D system: A case study of graphene oxide and 12-tungstophosphoric acid nanocomposite. in Carbon, 156, 166-178.
https://doi.org/10.1016/j.carbon.2019.09.072
https://hdl.handle.net/21.15107/rcub_dais_6882

Jovanović Z, Mravik Ž, Bajuk Bogdanović D, Jovanović S, Marković S, Vujković M, Kovač J, Vengust D, Uskoković-Marković S, Holclajtner Antunović I. Self-limiting interactions in 2D–0D system: A case study of graphene oxide and 12-tungstophosphoric acid nanocomposite. in Carbon. 2020;156:166-178.
doi:10.1016/j.carbon.2019.09.072
https://hdl.handle.net/21.15107/rcub_dais_6882 .

Jovanović, Zoran, Mravik, Željko, Bajuk Bogdanović, Danica, Jovanović, Sonja, Marković, Smilja, Vujković, Milica, Kovač, Janez, Vengust, Damjan, Uskoković-Marković, Snežana, Holclajtner Antunović, Ivanka, "Self-limiting interactions in 2D–0D system: A case study of graphene oxide and 12-tungstophosphoric acid nanocomposite" in Carbon, 156 (2020):166-178,
https://doi.org/10.1016/j.carbon.2019.09.072 .,
https://hdl.handle.net/21.15107/rcub_dais_6882 .