Rogan, Jelena

Link to this page

Authority KeyName Variants
3961d6b5-1106-4dbe-91db-1eb01d2ea589
  • Rogan, Jelena (14)
Projects

Author's Bibliography

Characterization of MgAl2O4 sintered ceramics

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Đorđević, Pavle; Marković, Smilja; Rogan, Jelena; Vulić, Predrag J.; Pavlović, Vladimir B.

(Belgrade : Serbian Ceramic Society, 2019)

TY  - CONF
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Đorđević, Pavle
AU  - Marković, Smilja
AU  - Rogan, Jelena
AU  - Vulić, Predrag J.
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6980
AB  - Single crystalline phase MgAl2O4 is made from the predetermined composition of MgO-Al2O3 powder mixture by using ball-milling. Mixtures of MgO and Al2O3 are treated in planetary ball mill for 30, 60, 90 and 120 minutes, in air. The aim of this experiment was to examine phase composition, microstructure, and densification behavior of all sintered samples and to find out which sample has the best features for further use. After sintering in dilatometer at 1500 °C, XRD patterns and SEM images were recorded. The results show that mechanical activation is an efficient method to improve the densification behavior of MgAl2O4 sintered specimens. With the prolonged milling time, densities increased, reaching the maximum value of 2.8 g/cm3 for sample activated 120 minutes.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019
T1  - Characterization of MgAl2O4 sintered ceramics
SP  - 54
EP  - 54
ER  - 
@conference{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Đorđević, Pavle and Marković, Smilja and Rogan, Jelena and Vulić, Predrag J. and Pavlović, Vladimir B.",
year = "2019",
url = "http://dais.sanu.ac.rs/123456789/6980",
abstract = "Single crystalline phase MgAl2O4 is made from the predetermined composition of MgO-Al2O3 powder mixture by using ball-milling. Mixtures of MgO and Al2O3 are treated in planetary ball mill for 30, 60, 90 and 120 minutes, in air. The aim of this experiment was to examine phase composition, microstructure, and densification behavior of all sintered samples and to find out which sample has the best features for further use. After sintering in dilatometer at 1500 °C, XRD patterns and SEM images were recorded. The results show that mechanical activation is an efficient method to improve the densification behavior of MgAl2O4 sintered specimens. With the prolonged milling time, densities increased, reaching the maximum value of 2.8 g/cm3 for sample activated 120 minutes.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019",
title = "Characterization of MgAl2O4 sintered ceramics",
pages = "54-54"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Đorđević, P., Marković, S., Rogan, J., Vulić, P. J.,& Pavlović, V. B. (2019). Characterization of MgAl2O4 sintered ceramics.
Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019
Belgrade : Serbian Ceramic Society., 54-54.
Obradović N, Fahrenholtz WG, Filipović S, Đorđević P, Marković S, Rogan J, Vulić PJ, Pavlović VB. Characterization of MgAl2O4 sintered ceramics. Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019. 2019;:54-54
Obradović Nina, Fahrenholtz William G., Filipović Suzana, Đorđević Pavle, Marković Smilja, Rogan Jelena, Vulić Predrag J., Pavlović Vladimir B., "Characterization of MgAl2O4 sintered ceramics" Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019 (2019):54-54

Characterization of MgAl2O4 sintered ceramics

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Corlett, Cole; Đorđević, Pavle; Rogan, Jelena; Vulić, Predrag J.; Buljak, Vladimir; Pavlović, Vladimir B.

(ETRAN, 2019)

TY  - JOUR
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Corlett, Cole
AU  - Đorđević, Pavle
AU  - Rogan, Jelena
AU  - Vulić, Predrag J.
AU  - Buljak, Vladimir
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6949
AB  - Single phase MgAl2O4 was made from a one-to-one molar ratio of MgO and Al2O3 powders mixed using ball-milling. Mixtures of MgO and Al2O3 were subsequently treated in planetary ball mill for 30, 60, 90 and 120 minutes in air. The aim of this study was to examine phase composition, microstructure, and densification behavior of sintered specimens. After sintering in dilatometer at 1500 °C, the powder was converted to single phase MgAl2O4. The results show that mechanical activation improved the densification behavior of MgAl2O4 sintered specimens, and it reduced the onset temperature for sintering by approx. 100 oC. Based on dilatometer data, powders were subsequently densified at 1450 oC by hot pressing. Almost аll specimens exhibited full density, while sample activated for 30 minutes showed the fastest densification rate.
PB  - ETRAN
T2  - Science of Sintering
T1  - Characterization of MgAl2O4 sintered ceramics
SP  - 363
EP  - 376
VL  - 51
IS  - 4
DO  - 10.2298/SOS1904363O
ER  - 
@article{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Corlett, Cole and Đorđević, Pavle and Rogan, Jelena and Vulić, Predrag J. and Buljak, Vladimir and Pavlović, Vladimir B.",
year = "2019",
url = "http://dais.sanu.ac.rs/123456789/6949",
abstract = "Single phase MgAl2O4 was made from a one-to-one molar ratio of MgO and Al2O3 powders mixed using ball-milling. Mixtures of MgO and Al2O3 were subsequently treated in planetary ball mill for 30, 60, 90 and 120 minutes in air. The aim of this study was to examine phase composition, microstructure, and densification behavior of sintered specimens. After sintering in dilatometer at 1500 °C, the powder was converted to single phase MgAl2O4. The results show that mechanical activation improved the densification behavior of MgAl2O4 sintered specimens, and it reduced the onset temperature for sintering by approx. 100 oC. Based on dilatometer data, powders were subsequently densified at 1450 oC by hot pressing. Almost аll specimens exhibited full density, while sample activated for 30 minutes showed the fastest densification rate.",
publisher = "ETRAN",
journal = "Science of Sintering",
title = "Characterization of MgAl2O4 sintered ceramics",
pages = "363-376",
volume = "51",
number = "4",
doi = "10.2298/SOS1904363O"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Corlett, C., Đorđević, P., Rogan, J., Vulić, P. J., Buljak, V.,& Pavlović, V. B. (2019). Characterization of MgAl2O4 sintered ceramics.
Science of Sintering
ETRAN., 51(4), 363-376.
https://doi.org/10.2298/SOS1904363O
Obradović N, Fahrenholtz WG, Filipović S, Corlett C, Đorđević P, Rogan J, Vulić PJ, Buljak V, Pavlović VB. Characterization of MgAl2O4 sintered ceramics. Science of Sintering. 2019;51(4):363-376
Obradović Nina, Fahrenholtz William G., Filipović Suzana, Corlett Cole, Đorđević Pavle, Rogan Jelena, Vulić Predrag J., Buljak Vladimir, Pavlović Vladimir B., "Characterization of MgAl2O4 sintered ceramics" Science of Sintering, 51, no. 4 (2019):363-376,
https://doi.org/10.2298/SOS1904363O .
2
2

Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Đorđević, Pavle; Rogan, Jelena; Pavlović, Vladimir B.

(The Ceramic Society of Japan, 2019)

TY  - CONF
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Đorđević, Pavle
AU  - Rogan, Jelena
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/7050
AB  - Magnesium aluminate and other alumina-based spinels attract attention due to their high hardness, high mechanical strength, and low dielectric constant. MgAl2O4 was produced by solid-state reaction between MgO and a-Al2O3 powders. Mechanical activation was used to increase the reactivity of powders and decrease the sintering temperatures. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 30, 60, 90, and 120 minutes. The resulting powders were characterized to determine the effect of activation on surface area, particle size, and crystallinity. Mechanical activation decreased particle size, increased surface area, and increased the width of peaks in x-ray diffraction. Dilatometry was used to monitor densification behavior up to 1500 °C. For non-activated powders, sintering started at approximately 1400 °C, while for activated powders, the onset temperature decreased to about 1340 °C. Mechanical activation is an efficient method to improve the densification behaviour of MgAl2O4 produced from mixed oxide powders.
PB  - The Ceramic Society of Japan
C3  - The 13th Pacific Rim Conference of Ceramic Societies (PACRIM13), October 27 - November 1, 2019, Okinawa Convention Center, Japan
T1  - Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel
SP  - 30-B1C-S13-14
ER  - 
@conference{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Đorđević, Pavle and Rogan, Jelena and Pavlović, Vladimir B.",
year = "2019",
url = "http://dais.sanu.ac.rs/123456789/7050",
abstract = "Magnesium aluminate and other alumina-based spinels attract attention due to their high hardness, high mechanical strength, and low dielectric constant. MgAl2O4 was produced by solid-state reaction between MgO and a-Al2O3 powders. Mechanical activation was used to increase the reactivity of powders and decrease the sintering temperatures. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 30, 60, 90, and 120 minutes. The resulting powders were characterized to determine the effect of activation on surface area, particle size, and crystallinity. Mechanical activation decreased particle size, increased surface area, and increased the width of peaks in x-ray diffraction. Dilatometry was used to monitor densification behavior up to 1500 °C. For non-activated powders, sintering started at approximately 1400 °C, while for activated powders, the onset temperature decreased to about 1340 °C. Mechanical activation is an efficient method to improve the densification behaviour of MgAl2O4 produced from mixed oxide powders.",
publisher = "The Ceramic Society of Japan",
journal = "The 13th Pacific Rim Conference of Ceramic Societies (PACRIM13), October 27 - November 1, 2019, Okinawa Convention Center, Japan",
title = "Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel",
pages = "30-B1C-S13-14"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Đorđević, P., Rogan, J.,& Pavlović, V. B. (2019). Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel.
The 13th Pacific Rim Conference of Ceramic Societies (PACRIM13), October 27 - November 1, 2019, Okinawa Convention Center, Japan
The Ceramic Society of Japan., 30-B1C-S13-14.
Obradović N, Fahrenholtz WG, Filipović S, Đorđević P, Rogan J, Pavlović VB. Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel. The 13th Pacific Rim Conference of Ceramic Societies (PACRIM13), October 27 - November 1, 2019, Okinawa Convention Center, Japan. 2019;:30-B1C-S13-14
Obradović Nina, Fahrenholtz William G., Filipović Suzana, Đorđević Pavle, Rogan Jelena, Pavlović Vladimir B., "Effect of Mechanical Activation on the Densification Behavior of MgAl2O4 Spinel" The 13th Pacific Rim Conference of Ceramic Societies (PACRIM13), October 27 - November 1, 2019, Okinawa Convention Center, Japan (2019):30-B1C-S13-14

The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics

Obradović, Nina; Fahrenholtz, William G.; Filipović, Suzana; Kosanović, Darko; Dapčević, Aleksandra; Rogan, Jelena; Pavlović, Vladimir B.

(Societa ceramica italiana, 2019)

TY  - CONF
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Kosanović, Darko
AU  - Dapčević, Aleksandra
AU  - Rogan, Jelena
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/7022
AB  - Magnesium aluminate, MgAl2O4, and other alumina-based spinels are refractory ceramics with high hardness and resistance to chemical attack while also being possible microwave dielectrics. Pure MgAl2O4 can be optically transparent when fully dense. Spinels exhibit inversion, which results in disorder among occupancy of A and B site cations. The goal of this study was to examine the effects of mechanical activation and composition on the temperature required for spinel formation and the site occupancy in the resulting spinel. 
MgAl2O4 was produced by solid state reaction between MgO and alpha-Al2O3. The starting powders were mixed by ball milling to homogenize the powders without significant particle size reduction. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 1 h. Powders were compacted at 300 MPa. Heat treatments were performed in air, at temperatures ranging from 1200 to 1500 °C with 2 h dwell time, to determine the amount of spinel formation as a function of temperature. Phase composition and microstructure of initial powders and heated samples were determined by means of X-ray diffraction, particle size analysis, and scanning electron microscopy. The influence of milling and consolidation parameters were studied by electrical measurements and mechanical characterization. 
The main results of this study were that mechanical activation for 60 minutes initiated a mechano-chemical reaction, and resulted in spinel formation at much lower temperatures than within non-activated powders. Microstructures of ceramics sintered below 1400 oC indicated that final stage sintering started at much lower temperatures for activated samples than for non-activated samples. 
Changes in microstructure parameters, as a consequence of mechanical treatment and subsequent heating of investigated powder mixtures, strongly affect electrical and mechanical properties of the final ceramics.
PB  - Societa ceramica italiana
PB  - Politecnico di Torino
C3  - Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019
T1  - The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics
SP  - 262
EP  - 262
ER  - 
@conference{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Kosanović, Darko and Dapčević, Aleksandra and Rogan, Jelena and Pavlović, Vladimir B.",
year = "2019",
url = "http://dais.sanu.ac.rs/123456789/7022",
abstract = "Magnesium aluminate, MgAl2O4, and other alumina-based spinels are refractory ceramics with high hardness and resistance to chemical attack while also being possible microwave dielectrics. Pure MgAl2O4 can be optically transparent when fully dense. Spinels exhibit inversion, which results in disorder among occupancy of A and B site cations. The goal of this study was to examine the effects of mechanical activation and composition on the temperature required for spinel formation and the site occupancy in the resulting spinel. 
MgAl2O4 was produced by solid state reaction between MgO and alpha-Al2O3. The starting powders were mixed by ball milling to homogenize the powders without significant particle size reduction. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 1 h. Powders were compacted at 300 MPa. Heat treatments were performed in air, at temperatures ranging from 1200 to 1500 °C with 2 h dwell time, to determine the amount of spinel formation as a function of temperature. Phase composition and microstructure of initial powders and heated samples were determined by means of X-ray diffraction, particle size analysis, and scanning electron microscopy. The influence of milling and consolidation parameters were studied by electrical measurements and mechanical characterization. 
The main results of this study were that mechanical activation for 60 minutes initiated a mechano-chemical reaction, and resulted in spinel formation at much lower temperatures than within non-activated powders. Microstructures of ceramics sintered below 1400 oC indicated that final stage sintering started at much lower temperatures for activated samples than for non-activated samples. 
Changes in microstructure parameters, as a consequence of mechanical treatment and subsequent heating of investigated powder mixtures, strongly affect electrical and mechanical properties of the final ceramics.",
publisher = "Societa ceramica italiana, Politecnico di Torino",
journal = "Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019",
title = "The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics",
pages = "262-262"
}
Obradović, N., Fahrenholtz, W. G., Filipović, S., Kosanović, D., Dapčević, A., Rogan, J.,& Pavlović, V. B. (2019). The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics.
Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019
Politecnico di Torino., 262-262.
Obradović N, Fahrenholtz WG, Filipović S, Kosanović D, Dapčević A, Rogan J, Pavlović VB. The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics. Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019. 2019;:262-262
Obradović Nina, Fahrenholtz William G., Filipović Suzana, Kosanović Darko, Dapčević Aleksandra, Rogan Jelena, Pavlović Vladimir B., "The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics" Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019 (2019):262-262

Morphological and structural characterization of spinel MgAl2O4

Filipović, Suzana; Obradović, Nina; Fahrenholtz, William G.; Marinković, Bojan A.; Rogan, Jelena; Lević, S.; Pavlović, Vladimir B.

(Belgrade : Serbian Ceramic Society, 2019)

TY  - CONF
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Marinković, Bojan A.
AU  - Rogan, Jelena
AU  - Lević, S.
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6779
AB  - Magnesium aluminate has spinel structure and very good mechanical, chemical, and thermal properties. Owing to these properties, it has a wide range of applications including refractory ceramics, optically transparent ceramic windows and armors. Its low dielectric permeability and low loss tangent enable its using for integrated electronic devices, as well. Furthermore, as a porous ceramic, magnesium aluminate has important application as humidity sensor, catalyst and filter for waste water purification. In this paper, synthesis and characterization of MgAl2O4 was performed. Stochiometric ratio of MgO and Al2O3powders was mixed and calcined within the temperatures range 1500-1800 oC to produce pure spinel phase. Thereafter pellets were crushed and treated in planetary ball mill for 60 minutes to obtained fine grain. All powders, calcined and milled, were examined for phase composition, crystal structure, and morphology. The obtained results showed that by increasing the temperature denser samples but more fragile have been synthesized. Milling for 1 hour leads to crumble of bigger particles and getting finer, single phase powders. XRPD and Raman spectroscopy showed disorder in crystal structure after milling.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019
T1  - Morphological and structural characterization of spinel MgAl2O4
SP  - 32
EP  - 32
ER  - 
@conference{
author = "Filipović, Suzana and Obradović, Nina and Fahrenholtz, William G. and Marinković, Bojan A. and Rogan, Jelena and Lević, S. and Pavlović, Vladimir B.",
year = "2019",
url = "http://dais.sanu.ac.rs/123456789/6779",
abstract = "Magnesium aluminate has spinel structure and very good mechanical, chemical, and thermal properties. Owing to these properties, it has a wide range of applications including refractory ceramics, optically transparent ceramic windows and armors. Its low dielectric permeability and low loss tangent enable its using for integrated electronic devices, as well. Furthermore, as a porous ceramic, magnesium aluminate has important application as humidity sensor, catalyst and filter for waste water purification. In this paper, synthesis and characterization of MgAl2O4 was performed. Stochiometric ratio of MgO and Al2O3powders was mixed and calcined within the temperatures range 1500-1800 oC to produce pure spinel phase. Thereafter pellets were crushed and treated in planetary ball mill for 60 minutes to obtained fine grain. All powders, calcined and milled, were examined for phase composition, crystal structure, and morphology. The obtained results showed that by increasing the temperature denser samples but more fragile have been synthesized. Milling for 1 hour leads to crumble of bigger particles and getting finer, single phase powders. XRPD and Raman spectroscopy showed disorder in crystal structure after milling.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019",
title = "Morphological and structural characterization of spinel MgAl2O4",
pages = "32-32"
}
Filipović, S., Obradović, N., Fahrenholtz, W. G., Marinković, B. A., Rogan, J., Lević, S.,& Pavlović, V. B. (2019). Morphological and structural characterization of spinel MgAl2O4.
Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019
Belgrade : Serbian Ceramic Society., 32-32.
Filipović S, Obradović N, Fahrenholtz WG, Marinković BA, Rogan J, Lević S, Pavlović VB. Morphological and structural characterization of spinel MgAl2O4. Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019. 2019;:32-32
Filipović Suzana, Obradović Nina, Fahrenholtz William G., Marinković Bojan A., Rogan Jelena, Lević S., Pavlović Vladimir B., "Morphological and structural characterization of spinel MgAl2O4" Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019 (2019):32-32

Synthesis and characterization of bioactive glass doped with lithium and strontium ions

Veljović, Đorđe; Radovanović, Željko; Rogan, Jelena; Dapčević, Aleksandra; Dimitrijević, Suzana; Dimitrijević Branković, Suzana; Kojić, Vesna; Janaćković, Đorđe

(Belgrade : Institute of Technical Sciences of SASA, 2018)

TY  - CONF
AU  - Veljović, Đorđe
AU  - Radovanović, Željko
AU  - Rogan, Jelena
AU  - Dapčević, Aleksandra
AU  - Dimitrijević, Suzana
AU  - Dimitrijević Branković, Suzana
AU  - Kojić, Vesna
AU  - Janaćković, Đorđe
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/4718
AB  - Bioactive glasses have been used for over three decades in biomedical applications owing to high bioactivity, biocompatibility, as well as the possibility to stimulate regeneration of the bone. The aim of this work was to synthesized bioactive glasses, which contain lithium and strontium, by commercial method melting-quenching, as well as determining the properties, affected by mentioned ions. Differential thermal/thermogravimetric analysis, particle size distribution, energy-dispersive X-ray spectroscopy, inductively coupled plasma optical emission spectrometry, evaluation of the antimicrobial activity, in vitro bioactivity and biocompatibility test and scanning electron microscopy were used for characterization. The results showed that glass transition and crystallization temperatures are decreasing with addition of lithium and strontium ions. Furthermore, the samples showed high inhibition rate of Escherichia coli growth, as well as high bioactivity and biocompatibility. The crystal apatite layer, formed on the surface of synthesized glasses after seven days in simulated body fluid, differs in shape, size and interconnection of the glass particles, which depends on concentration of lithium and strontium ions.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia
T1  - Synthesis and characterization of bioactive glass doped with lithium and strontium ions
SP  - 20
EP  - 20
ER  - 
@conference{
author = "Veljović, Đorđe and Radovanović, Željko and Rogan, Jelena and Dapčević, Aleksandra and Dimitrijević, Suzana and Dimitrijević Branković, Suzana and Kojić, Vesna and Janaćković, Đorđe",
year = "2018",
url = "http://dais.sanu.ac.rs/123456789/4718",
abstract = "Bioactive glasses have been used for over three decades in biomedical applications owing to high bioactivity, biocompatibility, as well as the possibility to stimulate regeneration of the bone. The aim of this work was to synthesized bioactive glasses, which contain lithium and strontium, by commercial method melting-quenching, as well as determining the properties, affected by mentioned ions. Differential thermal/thermogravimetric analysis, particle size distribution, energy-dispersive X-ray spectroscopy, inductively coupled plasma optical emission spectrometry, evaluation of the antimicrobial activity, in vitro bioactivity and biocompatibility test and scanning electron microscopy were used for characterization. The results showed that glass transition and crystallization temperatures are decreasing with addition of lithium and strontium ions. Furthermore, the samples showed high inhibition rate of Escherichia coli growth, as well as high bioactivity and biocompatibility. The crystal apatite layer, formed on the surface of synthesized glasses after seven days in simulated body fluid, differs in shape, size and interconnection of the glass particles, which depends on concentration of lithium and strontium ions.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia",
title = "Synthesis and characterization of bioactive glass doped with lithium and strontium ions",
pages = "20-20"
}
Veljović, Đ., Radovanović, Ž., Rogan, J., Dapčević, A., Dimitrijević, S., Dimitrijević Branković, S., Kojić, V.,& Janaćković, Đ. (2018). Synthesis and characterization of bioactive glass doped with lithium and strontium ions.
Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 20-20.
Veljović Đ, Radovanović Ž, Rogan J, Dapčević A, Dimitrijević S, Dimitrijević Branković S, Kojić V, Janaćković Đ. Synthesis and characterization of bioactive glass doped with lithium and strontium ions. Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia. 2018;:20-20
Veljović Đorđe, Radovanović Željko, Rogan Jelena, Dapčević Aleksandra, Dimitrijević Suzana, Dimitrijević Branković Suzana, Kojić Vesna, Janaćković Đorđe, "Synthesis and characterization of bioactive glass doped with lithium and strontium ions" Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia (2018):20-20

Physical Properties of Sintered Alumina Doped with Different Oxides

Filipović, Suzana; Obradović, Nina; Marković, Smilja; Đorđević, Antonije; Balać, Igor; Dapčević, Aleksandra; Rogan, Jelena; Pavlović, Vladimir B.

(Belgrade : ETRAN, 2018)

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Marković, Smilja
AU  - Đorđević, Antonije
AU  - Balać, Igor
AU  - Dapčević, Aleksandra
AU  - Rogan, Jelena
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/4537
AB  - Corundum (α-alumina) is a suitable material for usage in various industry fields owing to its chemical stability, electrical and mechanical features. It is known that properties of ceramics could be modified by addition of different oxides, as well as by changing the consolidation parameters. In this respect, alumina was doped with 1 wt.% of Cr2O3, Mn2O3 and NiO, followed by 1 hour of mechanical activation in a high-energy planetary ball mill. A sensitive dilatometer was used for sintering of powder mixtures up to 1400 oC and recording the obtained dilatation. The final density varied between cca. 1.9 and 3.3 g/cm3. Microstructural changes were detected by SEM measurements. Changes in electrical permittivity and loss tangent were associated with the preparation conditions (types of additives, duration of mechanical activation). For a given mixture, the sintering increases the relative permittivity and decreases losses, exhibiting the optimal values of 8.32 and 0.027, respectively, for the sample activated 60 minutes and sintered, with the addition of MnO2. Mechanical measurements indicate significant differences in strength with the addition of different transition metal oxides. Samples with Mn and Ni, activated and sintered, with strength of 121 and 86 MPa, respectively, have a significantly higher tensile strength than the other tested samples, due to their more compact microstructures.
PB  - Belgrade : ETRAN
T2  - Science of Sintering
T1  - Physical Properties of Sintered Alumina Doped with Different Oxides
SP  - 409
EP  - 419
VL  - 50
IS  - 4
DO  - 10.2298/SOS1804409F
ER  - 
@article{
author = "Filipović, Suzana and Obradović, Nina and Marković, Smilja and Đorđević, Antonije and Balać, Igor and Dapčević, Aleksandra and Rogan, Jelena and Pavlović, Vladimir B.",
year = "2018",
url = "http://dais.sanu.ac.rs/123456789/4537",
abstract = "Corundum (α-alumina) is a suitable material for usage in various industry fields owing to its chemical stability, electrical and mechanical features. It is known that properties of ceramics could be modified by addition of different oxides, as well as by changing the consolidation parameters. In this respect, alumina was doped with 1 wt.% of Cr2O3, Mn2O3 and NiO, followed by 1 hour of mechanical activation in a high-energy planetary ball mill. A sensitive dilatometer was used for sintering of powder mixtures up to 1400 oC and recording the obtained dilatation. The final density varied between cca. 1.9 and 3.3 g/cm3. Microstructural changes were detected by SEM measurements. Changes in electrical permittivity and loss tangent were associated with the preparation conditions (types of additives, duration of mechanical activation). For a given mixture, the sintering increases the relative permittivity and decreases losses, exhibiting the optimal values of 8.32 and 0.027, respectively, for the sample activated 60 minutes and sintered, with the addition of MnO2. Mechanical measurements indicate significant differences in strength with the addition of different transition metal oxides. Samples with Mn and Ni, activated and sintered, with strength of 121 and 86 MPa, respectively, have a significantly higher tensile strength than the other tested samples, due to their more compact microstructures.",
publisher = "Belgrade : ETRAN",
journal = "Science of Sintering",
title = "Physical Properties of Sintered Alumina Doped with Different Oxides",
pages = "409-419",
volume = "50",
number = "4",
doi = "10.2298/SOS1804409F"
}
Filipović, S., Obradović, N., Marković, S., Đorđević, A., Balać, I., Dapčević, A., Rogan, J.,& Pavlović, V. B. (2018). Physical Properties of Sintered Alumina Doped with Different Oxides.
Science of Sintering
Belgrade : ETRAN., 50(4), 409-419.
https://doi.org/10.2298/SOS1804409F
Filipović S, Obradović N, Marković S, Đorđević A, Balać I, Dapčević A, Rogan J, Pavlović VB. Physical Properties of Sintered Alumina Doped with Different Oxides. Science of Sintering. 2018;50(4):409-419
Filipović Suzana, Obradović Nina, Marković Smilja, Đorđević Antonije, Balać Igor, Dapčević Aleksandra, Rogan Jelena, Pavlović Vladimir B., "Physical Properties of Sintered Alumina Doped with Different Oxides" Science of Sintering, 50, no. 4 (2018):409-419,
https://doi.org/10.2298/SOS1804409F .
4
9
10

Sintering of alumina doped with different oxides, followed by sensitive dilatometer

Filipović, Suzana; Obradović, Nina; Marković, Smilja; Đorđević, Antonije; Dapčević, Aleksandra; Rogan, Jelena; Pavlović, Vladimir B.

(Belgrade : Materials Research Society of Serbia, 2018)

TY  - CONF
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Marković, Smilja
AU  - Đorđević, Antonije
AU  - Dapčević, Aleksandra
AU  - Rogan, Jelena
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/3634
AB  - Sintered alumina powder represents suitable material for usage in various industry fields (e.g., as chip carriers in electronics, microwaves, jewelry production), due to convenient physical properties, such as sinterability, electrical and mechanical features. Those properties can be modified by addition of different oxides and/or mechanical treatment. Therefore, in this investigation the alumina was doped with 1 wt. % of Cr2O3, Mn2O3 and NiO, respectively, followed by 1 hour of mechanical activation at 400 rpm in planetary ball mill. Sintering of powder mixtures was tracked by sensitive dilatometer up to 1400 °C. The final density values varied from cca. 2 ̶ 3.2 g/cm3. Changes in microstructure were observed by means of SEM. The influence of additives along with mechanical activation is monitored trough changes in electrical permittivity and loss tangent. Compared to pure alumina, the additives lower the relative permittivity and increase dielectric losses. For a given mixture, the sintering increases the relative permittivity and decreases losses.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018
T1  - Sintering of alumina doped with different oxides, followed by sensitive dilatometer
SP  - 95
EP  - 95
ER  - 
@conference{
author = "Filipović, Suzana and Obradović, Nina and Marković, Smilja and Đorđević, Antonije and Dapčević, Aleksandra and Rogan, Jelena and Pavlović, Vladimir B.",
year = "2018",
url = "http://dais.sanu.ac.rs/123456789/3634",
abstract = "Sintered alumina powder represents suitable material for usage in various industry fields (e.g., as chip carriers in electronics, microwaves, jewelry production), due to convenient physical properties, such as sinterability, electrical and mechanical features. Those properties can be modified by addition of different oxides and/or mechanical treatment. Therefore, in this investigation the alumina was doped with 1 wt. % of Cr2O3, Mn2O3 and NiO, respectively, followed by 1 hour of mechanical activation at 400 rpm in planetary ball mill. Sintering of powder mixtures was tracked by sensitive dilatometer up to 1400 °C. The final density values varied from cca. 2 ̶ 3.2 g/cm3. Changes in microstructure were observed by means of SEM. The influence of additives along with mechanical activation is monitored trough changes in electrical permittivity and loss tangent. Compared to pure alumina, the additives lower the relative permittivity and increase dielectric losses. For a given mixture, the sintering increases the relative permittivity and decreases losses.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018",
title = "Sintering of alumina doped with different oxides, followed by sensitive dilatometer",
pages = "95-95"
}
Filipović, S., Obradović, N., Marković, S., Đorđević, A., Dapčević, A., Rogan, J.,& Pavlović, V. B. (2018). Sintering of alumina doped with different oxides, followed by sensitive dilatometer.
Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018
Belgrade : Materials Research Society of Serbia., 95-95.
Filipović S, Obradović N, Marković S, Đorđević A, Dapčević A, Rogan J, Pavlović VB. Sintering of alumina doped with different oxides, followed by sensitive dilatometer. Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018. 2018;:95-95
Filipović Suzana, Obradović Nina, Marković Smilja, Đorđević Antonije, Dapčević Aleksandra, Rogan Jelena, Pavlović Vladimir B., "Sintering of alumina doped with different oxides, followed by sensitive dilatometer" Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018 (2018):95-95

Effects of ball-milling on properties of sintered alumina doped with Mn2O3

Filipović, Suzana; Obradović, Nina; Marković, Smilja; Mitrić, Miodrag; Đorđević, Antonije; Dapčević, Aleksandra; Rogan, Jelena; Pavlović, Vladimir B.

(Belgrade : Serbian Ceramic Society, 2018)

TY  - CONF
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Marković, Smilja
AU  - Mitrić, Miodrag
AU  - Đorđević, Antonije
AU  - Dapčević, Aleksandra
AU  - Rogan, Jelena
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/4114
AB  - Recently, with the huge use of smart gadgets, developing of smart jewelry represents a very interesting segment in material science, as well as in electronic science. Alumina is widely used ceramic in many industrial fields as pigments, catalysis, microelectronics, etc., mostly because of its low cost and appropriate mechanical and electrical properties, high surface area and thermal stability. Also, modified alumina could be applied in production of smart jewelry. Thus, the main objectives of this investigation is to improve features of sintered alumina doped with Mn2O3 along with mechanical treatment, in order to obtain strong ceramic with low values of dielectric loss and low relative dielectric permittivity, as well as esthetic. Commercial alumina powder was doped with 1 wt % of manganese oxide and treated in planetary ball mill for an hour. Characteristic temperatures of both powders (non-activated and activated one) were investigated in detail by DTA and TG analyses. After sintering at 1200, 1300, and 1400 oC for 2 h, XRD patterns and SEM images were recorded. Furthermore, mechanical and electrical properties were examined for all sintered samples.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018
T1  - Effects of ball-milling on properties of sintered alumina doped with Mn2O3
SP  - 75
EP  - 75
ER  - 
@conference{
author = "Filipović, Suzana and Obradović, Nina and Marković, Smilja and Mitrić, Miodrag and Đorđević, Antonije and Dapčević, Aleksandra and Rogan, Jelena and Pavlović, Vladimir B.",
year = "2018",
url = "http://dais.sanu.ac.rs/123456789/4114",
abstract = "Recently, with the huge use of smart gadgets, developing of smart jewelry represents a very interesting segment in material science, as well as in electronic science. Alumina is widely used ceramic in many industrial fields as pigments, catalysis, microelectronics, etc., mostly because of its low cost and appropriate mechanical and electrical properties, high surface area and thermal stability. Also, modified alumina could be applied in production of smart jewelry. Thus, the main objectives of this investigation is to improve features of sintered alumina doped with Mn2O3 along with mechanical treatment, in order to obtain strong ceramic with low values of dielectric loss and low relative dielectric permittivity, as well as esthetic. Commercial alumina powder was doped with 1 wt % of manganese oxide and treated in planetary ball mill for an hour. Characteristic temperatures of both powders (non-activated and activated one) were investigated in detail by DTA and TG analyses. After sintering at 1200, 1300, and 1400 oC for 2 h, XRD patterns and SEM images were recorded. Furthermore, mechanical and electrical properties were examined for all sintered samples.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018",
title = "Effects of ball-milling on properties of sintered alumina doped with Mn2O3",
pages = "75-75"
}
Filipović, S., Obradović, N., Marković, S., Mitrić, M., Đorđević, A., Dapčević, A., Rogan, J.,& Pavlović, V. B. (2018). Effects of ball-milling on properties of sintered alumina doped with Mn2O3.
Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018
Belgrade : Serbian Ceramic Society., 75-75.
Filipović S, Obradović N, Marković S, Mitrić M, Đorđević A, Dapčević A, Rogan J, Pavlović VB. Effects of ball-milling on properties of sintered alumina doped with Mn2O3. Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018. 2018;:75-75
Filipović Suzana, Obradović Nina, Marković Smilja, Mitrić Miodrag, Đorđević Antonije, Dapčević Aleksandra, Rogan Jelena, Pavlović Vladimir B., "Effects of ball-milling on properties of sintered alumina doped with Mn2O3" Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018 (2018):75-75

Photo-assisted electrochemical oxidation of the urea onto TiO2-nanotubes modified by hematite

Omymen, Waleed M.; Rogan, Jelena; Jugović, Branimir; Gvozdenović, Milica M.; Grgur, Branimir

(Elsevier, 2017)

TY  - JOUR
AU  - Omymen, Waleed M.
AU  - Rogan, Jelena
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Grgur, Branimir
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/2339
AB  - The electrochemical oxidation of the urea in near neutral pH is investigated on platinum electrode. It is shown that oxidation reaction is practically inhibited up to the potentials of ∼0.9 V. The same reaction is investigated onto electrochemically obtained titanium dioxide nanotubes modified by hematite using facile, low-cost successive ion layer adsorption and reaction (SILAR) method. It is shown that such system possesses electrocatalytic activity at very low potentials, and activity can be further improved by the illumination of the electrode in the photo-assisted reaction. The possible application of the photoactive anode is considered in the application of urea based water electrolysis and urea based fuel cell.
PB  - Elsevier
T2  - Journal of Saudi Chemical Society
T1  - Photo-assisted electrochemical oxidation of the urea onto TiO2-nanotubes modified by hematite
SP  - 990
EP  - 997
VL  - 21
IS  - 8
DO  - 10.1016/j.jscs.2017.05.010
ER  - 
@article{
author = "Omymen, Waleed M. and Rogan, Jelena and Jugović, Branimir and Gvozdenović, Milica M. and Grgur, Branimir",
year = "2017",
url = "http://dais.sanu.ac.rs/123456789/2339",
abstract = "The electrochemical oxidation of the urea in near neutral pH is investigated on platinum electrode. It is shown that oxidation reaction is practically inhibited up to the potentials of ∼0.9 V. The same reaction is investigated onto electrochemically obtained titanium dioxide nanotubes modified by hematite using facile, low-cost successive ion layer adsorption and reaction (SILAR) method. It is shown that such system possesses electrocatalytic activity at very low potentials, and activity can be further improved by the illumination of the electrode in the photo-assisted reaction. The possible application of the photoactive anode is considered in the application of urea based water electrolysis and urea based fuel cell.",
publisher = "Elsevier",
journal = "Journal of Saudi Chemical Society",
title = "Photo-assisted electrochemical oxidation of the urea onto TiO2-nanotubes modified by hematite",
pages = "990-997",
volume = "21",
number = "8",
doi = "10.1016/j.jscs.2017.05.010"
}
Omymen, W. M., Rogan, J., Jugović, B., Gvozdenović, M. M.,& Grgur, B. (2017). Photo-assisted electrochemical oxidation of the urea onto TiO2-nanotubes modified by hematite.
Journal of Saudi Chemical Society
Elsevier., 21(8), 990-997.
https://doi.org/10.1016/j.jscs.2017.05.010
Omymen WM, Rogan J, Jugović B, Gvozdenović MM, Grgur B. Photo-assisted electrochemical oxidation of the urea onto TiO2-nanotubes modified by hematite. Journal of Saudi Chemical Society. 2017;21(8):990-997
Omymen Waleed M., Rogan Jelena, Jugović Branimir, Gvozdenović Milica M., Grgur Branimir, "Photo-assisted electrochemical oxidation of the urea onto TiO2-nanotubes modified by hematite" Journal of Saudi Chemical Society, 21, no. 8 (2017):990-997,
https://doi.org/10.1016/j.jscs.2017.05.010 .
6
6
8

The influence of alkaline cations on the mechanism and kinetics of dehydration of polymeric phthalatocuprate(II) dihydrates

Zdravković, Jelena D.; Poleti, Dejan; Rogan, Jelena; Blagojević, Vladimir A.; Mészáros, Katalin; Minić, Dragica M.

(Elsevier, 2017)

TY  - JOUR
AU  - Zdravković, Jelena D.
AU  - Poleti, Dejan
AU  - Rogan, Jelena
AU  - Blagojević, Vladimir A.
AU  - Mészáros, Katalin
AU  - Minić, Dragica M.
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/4616
AB  - Thermal dehydration of two heterometallic complexes containing dianion of phthalic acid, pht, Na2[Cu(pht)2] · 2H2O, 1, and K2[Cu(pht)2] · 2H2O, 2, was investigated under non-isothermal conditions. Mechanism and kinetics of dehydration were analyzed in detail using TG/DSC/MS measurements, XRPD analysis and FT-IR spectroscopy. The reversibility of dehydration processes was identified. According to XRPD, dehydrated product of 1 maintains original structure, but dehydration of 2 undergoes structural transformation giving a dehydrated product of different crystal structure. In both cases dehydration process involves more than one elementary step, which was confirmed using isoconversional methods Deconvolution of this process using Fraiser-Suzuki function yielded two single step processes for 1 and 2. Subsequent kinetic analysis was performed using Màlek algorithm, resulting in the determination of kinetic triplets (Ea, A and f(α)) for each individual step. In addition, the dehydrated complexes were investigated as possible candidates for H2 adsorption, using molecular simulations.
PB  - Elsevier
T2  - Journal of Analytical and Applied Pyrolysis
T1  - The influence of alkaline cations on the mechanism and kinetics of dehydration of polymeric phthalatocuprate(II) dihydrates
SP  - 323
EP  - 331
VL  - 126
DO  - 10.1016/j.jaap.2017.05.014
ER  - 
@article{
author = "Zdravković, Jelena D. and Poleti, Dejan and Rogan, Jelena and Blagojević, Vladimir A. and Mészáros, Katalin and Minić, Dragica M.",
year = "2017",
url = "http://dais.sanu.ac.rs/123456789/4616",
abstract = "Thermal dehydration of two heterometallic complexes containing dianion of phthalic acid, pht, Na2[Cu(pht)2] · 2H2O, 1, and K2[Cu(pht)2] · 2H2O, 2, was investigated under non-isothermal conditions. Mechanism and kinetics of dehydration were analyzed in detail using TG/DSC/MS measurements, XRPD analysis and FT-IR spectroscopy. The reversibility of dehydration processes was identified. According to XRPD, dehydrated product of 1 maintains original structure, but dehydration of 2 undergoes structural transformation giving a dehydrated product of different crystal structure. In both cases dehydration process involves more than one elementary step, which was confirmed using isoconversional methods Deconvolution of this process using Fraiser-Suzuki function yielded two single step processes for 1 and 2. Subsequent kinetic analysis was performed using Màlek algorithm, resulting in the determination of kinetic triplets (Ea, A and f(α)) for each individual step. In addition, the dehydrated complexes were investigated as possible candidates for H2 adsorption, using molecular simulations.",
publisher = "Elsevier",
journal = "Journal of Analytical and Applied Pyrolysis",
title = "The influence of alkaline cations on the mechanism and kinetics of dehydration of polymeric phthalatocuprate(II) dihydrates",
pages = "323-331",
volume = "126",
doi = "10.1016/j.jaap.2017.05.014"
}
Zdravković, J. D., Poleti, D., Rogan, J., Blagojević, V. A., Mészáros, K.,& Minić, D. M. (2017). The influence of alkaline cations on the mechanism and kinetics of dehydration of polymeric phthalatocuprate(II) dihydrates.
Journal of Analytical and Applied Pyrolysis
Elsevier., 126, 323-331.
https://doi.org/10.1016/j.jaap.2017.05.014
Zdravković JD, Poleti D, Rogan J, Blagojević VA, Mészáros K, Minić DM. The influence of alkaline cations on the mechanism and kinetics of dehydration of polymeric phthalatocuprate(II) dihydrates. Journal of Analytical and Applied Pyrolysis. 2017;126:323-331
Zdravković Jelena D., Poleti Dejan, Rogan Jelena, Blagojević Vladimir A., Mészáros Katalin, Minić Dragica M., "The influence of alkaline cations on the mechanism and kinetics of dehydration of polymeric phthalatocuprate(II) dihydrates" Journal of Analytical and Applied Pyrolysis, 126 (2017):323-331,
https://doi.org/10.1016/j.jaap.2017.05.014 .
1
1
1

The influence of alkaline cations on the mechanism and kinetics of dehydration of polymeric phthalatocuprate(II) dihydrates

Zdravković, Jelena D.; Poleti, Dejan; Rogan, Jelena; Blagojević, Vladimir A.; Mészáros, Katalin; Minić, Dragica M.

(Elsevier, 2017)

TY  - JOUR
AU  - Zdravković, Jelena D.
AU  - Poleti, Dejan
AU  - Rogan, Jelena
AU  - Blagojević, Vladimir A.
AU  - Mészáros, Katalin
AU  - Minić, Dragica M.
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/2351
AB  - Thermal dehydration of two heterometallic complexes containing dianion of phthalic acid, pht, Na2[Cu(pht)2] · 2H2O, 1, and K2[Cu(pht)2] · 2H2O, 2, was investigated under non-isothermal conditions. Mechanism and kinetics of dehydration were analyzed in detail using TG/DSC/MS measurements, XRPD analysis and FT-IR spectroscopy. The reversibility of dehydration processes was identified. According to XRPD, dehydrated product of 1 maintains original structure, but dehydration of 2 undergoes structural transformation giving a dehydrated product of different crystal structure. In both cases dehydration process involves more than one elementary step, which was confirmed using isoconversional methods Deconvolution of this process using Fraiser-Suzuki function yielded two single step processes for 1 and 2. Subsequent kinetic analysis was performed using Màlek algorithm, resulting in the determination of kinetic triplets (Ea, A and f(α)) for each individual step. In addition, the dehydrated complexes were investigated as possible candidates for H2 adsorption, using molecular simulations.
PB  - Elsevier
T2  - Journal of Analytical and Applied Pyrolysis
T1  - The influence of alkaline cations on the mechanism and kinetics of dehydration of polymeric phthalatocuprate(II) dihydrates
SP  - 323
EP  - 331
VL  - 126
DO  - 10.1016/j.jaap.2017.05.014
ER  - 
@article{
author = "Zdravković, Jelena D. and Poleti, Dejan and Rogan, Jelena and Blagojević, Vladimir A. and Mészáros, Katalin and Minić, Dragica M.",
year = "2017",
url = "http://dais.sanu.ac.rs/123456789/2351",
abstract = "Thermal dehydration of two heterometallic complexes containing dianion of phthalic acid, pht, Na2[Cu(pht)2] · 2H2O, 1, and K2[Cu(pht)2] · 2H2O, 2, was investigated under non-isothermal conditions. Mechanism and kinetics of dehydration were analyzed in detail using TG/DSC/MS measurements, XRPD analysis and FT-IR spectroscopy. The reversibility of dehydration processes was identified. According to XRPD, dehydrated product of 1 maintains original structure, but dehydration of 2 undergoes structural transformation giving a dehydrated product of different crystal structure. In both cases dehydration process involves more than one elementary step, which was confirmed using isoconversional methods Deconvolution of this process using Fraiser-Suzuki function yielded two single step processes for 1 and 2. Subsequent kinetic analysis was performed using Màlek algorithm, resulting in the determination of kinetic triplets (Ea, A and f(α)) for each individual step. In addition, the dehydrated complexes were investigated as possible candidates for H2 adsorption, using molecular simulations.",
publisher = "Elsevier",
journal = "Journal of Analytical and Applied Pyrolysis",
title = "The influence of alkaline cations on the mechanism and kinetics of dehydration of polymeric phthalatocuprate(II) dihydrates",
pages = "323-331",
volume = "126",
doi = "10.1016/j.jaap.2017.05.014"
}
Zdravković, J. D., Poleti, D., Rogan, J., Blagojević, V. A., Mészáros, K.,& Minić, D. M. (2017). The influence of alkaline cations on the mechanism and kinetics of dehydration of polymeric phthalatocuprate(II) dihydrates.
Journal of Analytical and Applied Pyrolysis
Elsevier., 126, 323-331.
https://doi.org/10.1016/j.jaap.2017.05.014
Zdravković JD, Poleti D, Rogan J, Blagojević VA, Mészáros K, Minić DM. The influence of alkaline cations on the mechanism and kinetics of dehydration of polymeric phthalatocuprate(II) dihydrates. Journal of Analytical and Applied Pyrolysis. 2017;126:323-331
Zdravković Jelena D., Poleti Dejan, Rogan Jelena, Blagojević Vladimir A., Mészáros Katalin, Minić Dragica M., "The influence of alkaline cations on the mechanism and kinetics of dehydration of polymeric phthalatocuprate(II) dihydrates" Journal of Analytical and Applied Pyrolysis, 126 (2017):323-331,
https://doi.org/10.1016/j.jaap.2017.05.014 .
1
1
1

Thermal stability and degradation of binuclear hexaaqua-bis(ethylenediamine)-(μ 2-pyromellitato)dinickel(II) tetrahydrate

Zdravković, Jelena D.; Poleti, Dejan; Rogan, Jelena; Begović, Nebojša N.; Blagojević, Vladimir A.; Vasić, Milica M.; Minić, Dragica M.

(Springer, 2016)

TY  - JOUR
AU  - Zdravković, Jelena D.
AU  - Poleti, Dejan
AU  - Rogan, Jelena
AU  - Begović, Nebojša N.
AU  - Blagojević, Vladimir A.
AU  - Vasić, Milica M.
AU  - Minić, Dragica M.
PY  - 2016
UR  - http://dais.sanu.ac.rs/123456789/16009
AB  - Thermal degradation of ternary transition metal complex containing tetraanion of pyromellitic acid, pyr, and ethylenediamine, en, [Ni2(en)2(H2O)6(pyr)]·4H2O, 1, was investigated under non-isothermal conditions. The mechanism of thermal degradation, which occurs in three steps, was clarified by TG/DSC measurements in conjunction with FT-IR spectroscopy and XRPD analysis. The complexity of all degradation steps has been revealed using isoconversional methods. Dehydration comprises the loss of ten water molecules in a relatively narrow temperature interval, resulting in a very complicated reaction mechanism. In addition, density functional theory calculations have been applied for better understanding of dehydration. The second degradation step, related to loss of en, was separated into two single-step processes with Fraser–Suzuki function. The obtained individual steps were described by Johnson–Mehl–Avrami A2 model and Šesták–Berggren model, respectively. Validation of the proposed kinetic triplets for individual steps was performed using master plot and Pérez-Maqueda criteria. The third degradation step is related to the fragmentation of pyr ion most likely followed with the release of a number of gaseous products.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Thermal stability and degradation of binuclear hexaaqua-bis(ethylenediamine)-(μ 2-pyromellitato)dinickel(II) tetrahydrate
SP  - 1715
EP  - 1726
VL  - 123
IS  - 2
DO  - 10.1007/s10973-015-5007-0
ER  - 
@article{
author = "Zdravković, Jelena D. and Poleti, Dejan and Rogan, Jelena and Begović, Nebojša N. and Blagojević, Vladimir A. and Vasić, Milica M. and Minić, Dragica M.",
year = "2016",
url = "http://dais.sanu.ac.rs/123456789/16009",
abstract = "Thermal degradation of ternary transition metal complex containing tetraanion of pyromellitic acid, pyr, and ethylenediamine, en, [Ni2(en)2(H2O)6(pyr)]·4H2O, 1, was investigated under non-isothermal conditions. The mechanism of thermal degradation, which occurs in three steps, was clarified by TG/DSC measurements in conjunction with FT-IR spectroscopy and XRPD analysis. The complexity of all degradation steps has been revealed using isoconversional methods. Dehydration comprises the loss of ten water molecules in a relatively narrow temperature interval, resulting in a very complicated reaction mechanism. In addition, density functional theory calculations have been applied for better understanding of dehydration. The second degradation step, related to loss of en, was separated into two single-step processes with Fraser–Suzuki function. The obtained individual steps were described by Johnson–Mehl–Avrami A2 model and Šesták–Berggren model, respectively. Validation of the proposed kinetic triplets for individual steps was performed using master plot and Pérez-Maqueda criteria. The third degradation step is related to the fragmentation of pyr ion most likely followed with the release of a number of gaseous products.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Thermal stability and degradation of binuclear hexaaqua-bis(ethylenediamine)-(μ 2-pyromellitato)dinickel(II) tetrahydrate",
pages = "1715-1726",
volume = "123",
number = "2",
doi = "10.1007/s10973-015-5007-0"
}
Zdravković, J. D., Poleti, D., Rogan, J., Begović, N. N., Blagojević, V. A., Vasić, M. M.,& Minić, D. M. (2016). Thermal stability and degradation of binuclear hexaaqua-bis(ethylenediamine)-(μ 2-pyromellitato)dinickel(II) tetrahydrate.
Journal of Thermal Analysis and Calorimetry
Springer., 123(2), 1715-1726.
https://doi.org/10.1007/s10973-015-5007-0
Zdravković JD, Poleti D, Rogan J, Begović NN, Blagojević VA, Vasić MM, Minić DM. Thermal stability and degradation of binuclear hexaaqua-bis(ethylenediamine)-(μ 2-pyromellitato)dinickel(II) tetrahydrate. Journal of Thermal Analysis and Calorimetry. 2016;123(2):1715-1726
Zdravković Jelena D., Poleti Dejan, Rogan Jelena, Begović Nebojša N., Blagojević Vladimir A., Vasić Milica M., Minić Dragica M., "Thermal stability and degradation of binuclear hexaaqua-bis(ethylenediamine)-(μ 2-pyromellitato)dinickel(II) tetrahydrate" Journal of Thermal Analysis and Calorimetry, 123, no. 2 (2016):1715-1726,
https://doi.org/10.1007/s10973-015-5007-0 .
3
4
4

Mechanochemical preparation and characterization of CaO·ZnO used as catalyst for biodiesel synthesis

Kesić, Željka; Lukić, Ivana; Brkić, Dragana; Rogan, Jelena; Zdujić, Miodrag; Liu, Hui; Skala, Dejan

(Elsevier, 2012)

TY  - JOUR
AU  - Kesić, Željka
AU  - Lukić, Ivana
AU  - Brkić, Dragana
AU  - Rogan, Jelena
AU  - Zdujić, Miodrag
AU  - Liu, Hui
AU  - Skala, Dejan
PY  - 2012
UR  - http://dais.sanu.ac.rs/123456789/473
AB  - In this study, the synthesis of biodiesel or fatty acid methyl esters (FAME) from sunflower oil and methanol using CaO·ZnO catalyst was investigated. Catalyst was synthesized by ball milling of Ca(OH)2 and ZnO powder mixture with the addition of water (BMH), as well as solely by ball milling of mentioned powders (BM) and subsequent calcination at 700 °C in air atmosphere. For comparison, the CaO·ZnO mixed oxide was also prepared using usual coprecipitation procedure (CP) followed by calcination at 700 °C of the formed calcium zinc hydroxide hydrate. The BMH, BM and CP catalysts were characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), infrared spectroscopy (FTIR), particle size distribution measurement and scanning electron microscopy (SEM and SEM-EDS). In addition, specific surface area (BET), solubility in methanol at 60 °C and alkalinity (Hammett indicator method) were also determined. The activity of BMH, BM and CP catalysts for biodiesel synthesis were tested at 60 °C and 1 bar, using molar ratio of sunflower oil to methanol of 1:10 and with 2 wt% of catalyst based on oil weight.
PB  - Elsevier
T2  - Applied Catalysis A: General
T1  - Mechanochemical preparation and characterization of CaO·ZnO used as catalyst for biodiesel synthesis
SP  - 58
EP  - 65
DO  - 10.1016/j.apcata.2012.03.032
ER  - 
@article{
author = "Kesić, Željka and Lukić, Ivana and Brkić, Dragana and Rogan, Jelena and Zdujić, Miodrag and Liu, Hui and Skala, Dejan",
year = "2012",
url = "http://dais.sanu.ac.rs/123456789/473",
abstract = "In this study, the synthesis of biodiesel or fatty acid methyl esters (FAME) from sunflower oil and methanol using CaO·ZnO catalyst was investigated. Catalyst was synthesized by ball milling of Ca(OH)2 and ZnO powder mixture with the addition of water (BMH), as well as solely by ball milling of mentioned powders (BM) and subsequent calcination at 700 °C in air atmosphere. For comparison, the CaO·ZnO mixed oxide was also prepared using usual coprecipitation procedure (CP) followed by calcination at 700 °C of the formed calcium zinc hydroxide hydrate. The BMH, BM and CP catalysts were characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), infrared spectroscopy (FTIR), particle size distribution measurement and scanning electron microscopy (SEM and SEM-EDS). In addition, specific surface area (BET), solubility in methanol at 60 °C and alkalinity (Hammett indicator method) were also determined. The activity of BMH, BM and CP catalysts for biodiesel synthesis were tested at 60 °C and 1 bar, using molar ratio of sunflower oil to methanol of 1:10 and with 2 wt% of catalyst based on oil weight.",
publisher = "Elsevier",
journal = "Applied Catalysis A: General",
title = "Mechanochemical preparation and characterization of CaO·ZnO used as catalyst for biodiesel synthesis",
pages = "58-65",
doi = "10.1016/j.apcata.2012.03.032"
}
Kesić, Ž., Lukić, I., Brkić, D., Rogan, J., Zdujić, M., Liu, H.,& Skala, D. (2012). Mechanochemical preparation and characterization of CaO·ZnO used as catalyst for biodiesel synthesis.
Applied Catalysis A: General
Elsevier., 58-65.
https://doi.org/10.1016/j.apcata.2012.03.032
Kesić Ž, Lukić I, Brkić D, Rogan J, Zdujić M, Liu H, Skala D. Mechanochemical preparation and characterization of CaO·ZnO used as catalyst for biodiesel synthesis. Applied Catalysis A: General. 2012;:58-65
Kesić Željka, Lukić Ivana, Brkić Dragana, Rogan Jelena, Zdujić Miodrag, Liu Hui, Skala Dejan, "Mechanochemical preparation and characterization of CaO·ZnO used as catalyst for biodiesel synthesis" Applied Catalysis A: General (2012):58-65,
https://doi.org/10.1016/j.apcata.2012.03.032 .
9
58
58
69