Đokić, Veljko

Link to this page

Authority KeyName Variants
orcid::0000-0003-2541-0420
  • Đokić, Veljko (10)
  • Đokić, Veljko R. (4)
Projects
Directed synthesis, structure and properties of multifunctional materials Synthesis, processing and applications of nanostructured multifunctional materials with defined properties
Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200116 (University of Belgrade, Faculty of Agriculture) Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200125 (University of Novi Sad, Faculty of Science)
Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200135 (University of Belgrade, Faculty of Technology and Metallurgy) Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200168 (University of Belgrade, Faculty of Chemistry)
Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200175 (Institute of Technical Sciences of SASA, Belgrade) Matériaux hiérarchiques et fonctionnels pour la santé, l’environnement et l’énergie (HiFunMat)
Bilateral project between Serbia and Slovenia "Developments of novel materials for alkaline-ion batteries" ERC advanced grant “PICOPROP” (Grant No. 670918)
Molecular designing of nanoparticles with controlled morphological and physicochemical characteristics and functional materials based on them Magnetic and radionuclide labeled nanostructured materials for medical applications
Serbian Academy of Sciences and Arts, Project F-190 Swiss National Science Foundation (No. 160169)

Author's Bibliography

2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior

Ristić, Predrag; Filipović, Nenad; Blagojević, Vladimir A.; Ćirković, Jovana; Holló, Berta Barta; Đokić, Veljko R.; Donnard, Morgan; Gulea, Mihaela; Marjanović, Ivana; Klisurić, Olivera R.; Todorović, Tamara R.

(Royal Society of Chemistry (RSC), 2021)

TY  - JOUR
AU  - Ristić, Predrag
AU  - Filipović, Nenad
AU  - Blagojević, Vladimir A.
AU  - Ćirković, Jovana
AU  - Holló, Berta Barta
AU  - Đokić, Veljko R.
AU  - Donnard, Morgan
AU  - Gulea, Mihaela
AU  - Marjanović, Ivana
AU  - Klisurić, Olivera R.
AU  - Todorović, Tamara R.
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11753
AB  - Four silver-based coordination polymers, {[Ag(L1)2]NO3}∞ (1), {[Ag(L1)2]ClO4}∞ (2), {[Ag(L2)2]NO3·H2O}∞ (3) and {[Ag(L2)2]ClO4}∞ (4), were synthesized using the thiomorpholine-4-carbonitrile (L1) and piperazine-1,4-dicarbonitrile (L2) ligands. Compounds 1 and 2 are two-dimensional, while 3 and 4 are three-dimensional. L1 and L2 are 1,4-bis-monodentate ligands in all compounds, while Ag(I) ions are four-coordinated in a slightly distorted tetrahedral geometry. Topological analysis in standard representations suggests that underlying nets in 1 and 2 have an sql topology, while 3 and 4 exhibit a dia topology. Thermal analysis shows that 3 loses crystalline water at room temperature, while other compounds show good thermal stability. All compounds show good photocatalytic activity for photocatalytic degradation of the mordant blue 9 dye, with reaction rates in the range 0.029 to 0.061 min−1. The best result was obtained for compound 4, which can be correlated to its largest lattice volume.
PB  - Royal Society of Chemistry (RSC)
T2  - CrystEngComm
T1  - 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior
SP  - 4799
EP  - 4815
VL  - 23
IS  - 27
DO  - 10.1039/D1CE00394A
UR  - https://hdl.handle.net/21.15107/rcub_dais_11753
ER  - 
@article{
author = "Ristić, Predrag and Filipović, Nenad and Blagojević, Vladimir A. and Ćirković, Jovana and Holló, Berta Barta and Đokić, Veljko R. and Donnard, Morgan and Gulea, Mihaela and Marjanović, Ivana and Klisurić, Olivera R. and Todorović, Tamara R.",
year = "2021",
abstract = "Four silver-based coordination polymers, {[Ag(L1)2]NO3}∞ (1), {[Ag(L1)2]ClO4}∞ (2), {[Ag(L2)2]NO3·H2O}∞ (3) and {[Ag(L2)2]ClO4}∞ (4), were synthesized using the thiomorpholine-4-carbonitrile (L1) and piperazine-1,4-dicarbonitrile (L2) ligands. Compounds 1 and 2 are two-dimensional, while 3 and 4 are three-dimensional. L1 and L2 are 1,4-bis-monodentate ligands in all compounds, while Ag(I) ions are four-coordinated in a slightly distorted tetrahedral geometry. Topological analysis in standard representations suggests that underlying nets in 1 and 2 have an sql topology, while 3 and 4 exhibit a dia topology. Thermal analysis shows that 3 loses crystalline water at room temperature, while other compounds show good thermal stability. All compounds show good photocatalytic activity for photocatalytic degradation of the mordant blue 9 dye, with reaction rates in the range 0.029 to 0.061 min−1. The best result was obtained for compound 4, which can be correlated to its largest lattice volume.",
publisher = "Royal Society of Chemistry (RSC)",
journal = "CrystEngComm",
title = "2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior",
pages = "4799-4815",
volume = "23",
number = "27",
doi = "10.1039/D1CE00394A",
url = "https://hdl.handle.net/21.15107/rcub_dais_11753"
}
Ristić, P., Filipović, N., Blagojević, V. A., Ćirković, J., Holló, B. B., Đokić, V. R., Donnard, M., Gulea, M., Marjanović, I., Klisurić, O. R.,& Todorović, T. R.. (2021). 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior. in CrystEngComm
Royal Society of Chemistry (RSC)., 23(27), 4799-4815.
https://doi.org/10.1039/D1CE00394A
https://hdl.handle.net/21.15107/rcub_dais_11753
Ristić P, Filipović N, Blagojević VA, Ćirković J, Holló BB, Đokić VR, Donnard M, Gulea M, Marjanović I, Klisurić OR, Todorović TR. 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior. in CrystEngComm. 2021;23(27):4799-4815.
doi:10.1039/D1CE00394A
https://hdl.handle.net/21.15107/rcub_dais_11753 .
Ristić, Predrag, Filipović, Nenad, Blagojević, Vladimir A., Ćirković, Jovana, Holló, Berta Barta, Đokić, Veljko R., Donnard, Morgan, Gulea, Mihaela, Marjanović, Ivana, Klisurić, Olivera R., Todorović, Tamara R., "2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior" in CrystEngComm, 23, no. 27 (2021):4799-4815,
https://doi.org/10.1039/D1CE00394A .,
https://hdl.handle.net/21.15107/rcub_dais_11753 .
3
2
2

2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior

Ristić, Predrag; Filipović, Nenad; Blagojević, Vladimir A.; Ćirković, Jovana; Holló, Berta Barta; Đokić, Veljko R.; Donnard, Morgan; Gulea, Mihaela; Marjanović, Ivana; Klisurić, Olivera R.; Todorović, Tamara R.

(Royal Society of Chemistry (RSC), 2021)

TY  - JOUR
AU  - Ristić, Predrag
AU  - Filipović, Nenad
AU  - Blagojević, Vladimir A.
AU  - Ćirković, Jovana
AU  - Holló, Berta Barta
AU  - Đokić, Veljko R.
AU  - Donnard, Morgan
AU  - Gulea, Mihaela
AU  - Marjanović, Ivana
AU  - Klisurić, Olivera R.
AU  - Todorović, Tamara R.
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11757
AB  - Four silver-based coordination polymers, {[Ag(L1)2]NO3}∞ (1), {[Ag(L1)2]ClO4}∞ (2), {[Ag(L2)2]NO3·H2O}∞ (3) and {[Ag(L2)2]ClO4}∞ (4), were synthesized using the thiomorpholine-4-carbonitrile (L1) and piperazine-1,4-dicarbonitrile (L2) ligands. Compounds 1 and 2 are two-dimensional, while 3 and 4 are three-dimensional. L1 and L2 are 1,4-bis-monodentate ligands in all compounds, while Ag(I) ions are four-coordinated in a slightly distorted tetrahedral geometry. Topological analysis in standard representations suggests that underlying nets in 1 and 2 have an sql topology, while 3 and 4 exhibit a dia topology. Thermal analysis shows that 3 loses crystalline water at room temperature, while other compounds show good thermal stability. All compounds show good photocatalytic activity for photocatalytic degradation of the mordant blue 9 dye, with reaction rates in the range 0.029 to 0.061 min−1. The best result was obtained for compound 4, which can be correlated to its largest lattice volume.
PB  - Royal Society of Chemistry (RSC)
T2  - CrystEngComm
T1  - 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior
SP  - 4799
EP  - 4815
VL  - 23
IS  - 27
DO  - 10.1039/D1CE00394A
UR  - https://hdl.handle.net/21.15107/rcub_dais_11757
ER  - 
@article{
author = "Ristić, Predrag and Filipović, Nenad and Blagojević, Vladimir A. and Ćirković, Jovana and Holló, Berta Barta and Đokić, Veljko R. and Donnard, Morgan and Gulea, Mihaela and Marjanović, Ivana and Klisurić, Olivera R. and Todorović, Tamara R.",
year = "2021",
abstract = "Four silver-based coordination polymers, {[Ag(L1)2]NO3}∞ (1), {[Ag(L1)2]ClO4}∞ (2), {[Ag(L2)2]NO3·H2O}∞ (3) and {[Ag(L2)2]ClO4}∞ (4), were synthesized using the thiomorpholine-4-carbonitrile (L1) and piperazine-1,4-dicarbonitrile (L2) ligands. Compounds 1 and 2 are two-dimensional, while 3 and 4 are three-dimensional. L1 and L2 are 1,4-bis-monodentate ligands in all compounds, while Ag(I) ions are four-coordinated in a slightly distorted tetrahedral geometry. Topological analysis in standard representations suggests that underlying nets in 1 and 2 have an sql topology, while 3 and 4 exhibit a dia topology. Thermal analysis shows that 3 loses crystalline water at room temperature, while other compounds show good thermal stability. All compounds show good photocatalytic activity for photocatalytic degradation of the mordant blue 9 dye, with reaction rates in the range 0.029 to 0.061 min−1. The best result was obtained for compound 4, which can be correlated to its largest lattice volume.",
publisher = "Royal Society of Chemistry (RSC)",
journal = "CrystEngComm",
title = "2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior",
pages = "4799-4815",
volume = "23",
number = "27",
doi = "10.1039/D1CE00394A",
url = "https://hdl.handle.net/21.15107/rcub_dais_11757"
}
Ristić, P., Filipović, N., Blagojević, V. A., Ćirković, J., Holló, B. B., Đokić, V. R., Donnard, M., Gulea, M., Marjanović, I., Klisurić, O. R.,& Todorović, T. R.. (2021). 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior. in CrystEngComm
Royal Society of Chemistry (RSC)., 23(27), 4799-4815.
https://doi.org/10.1039/D1CE00394A
https://hdl.handle.net/21.15107/rcub_dais_11757
Ristić P, Filipović N, Blagojević VA, Ćirković J, Holló BB, Đokić VR, Donnard M, Gulea M, Marjanović I, Klisurić OR, Todorović TR. 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior. in CrystEngComm. 2021;23(27):4799-4815.
doi:10.1039/D1CE00394A
https://hdl.handle.net/21.15107/rcub_dais_11757 .
Ristić, Predrag, Filipović, Nenad, Blagojević, Vladimir A., Ćirković, Jovana, Holló, Berta Barta, Đokić, Veljko R., Donnard, Morgan, Gulea, Mihaela, Marjanović, Ivana, Klisurić, Olivera R., Todorović, Tamara R., "2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior" in CrystEngComm, 23, no. 27 (2021):4799-4815,
https://doi.org/10.1039/D1CE00394A .,
https://hdl.handle.net/21.15107/rcub_dais_11757 .
3
2
2

Crystallographic Information for the article: Ristić, P., Filipović, N., Blagojević, V. A., Ćirković, J., Holló, B. B., Đokić, V. R., Donnard, M., Gulea, M., Marjanović, I., Klisurić, O. R.,& Todorović, T. R. (2021). 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior. CrystEngComm, Royal Society of Chemistry (RSC), 23(27), 4799-4815. https://doi.org/10.1039/D1CE00394A

Ristić, Predrag; Filipović, Nenad; Blagojević, Vladimir A.; Ćirković, Jovana; Holló, Berta Barta; Đokić, Veljko R.; Donnard, Morgan; Gulea, Mihaela; Marjanović, Ivana; Klisurić, Olivera R.; Todorović, Tamara R.

(Royal Society of Chemistry (RSC), 2021)

TY  - DATA
AU  - Ristić, Predrag
AU  - Filipović, Nenad
AU  - Blagojević, Vladimir A.
AU  - Ćirković, Jovana
AU  - Holló, Berta Barta
AU  - Đokić, Veljko R.
AU  - Donnard, Morgan
AU  - Gulea, Mihaela
AU  - Marjanović, Ivana
AU  - Klisurić, Olivera R.
AU  - Todorović, Tamara R.
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11761
AB  - Four silver-based coordination polymers, {[Ag(L1)2]NO3}∞ (1), {[Ag(L1)2]ClO4}∞ (2), {[Ag(L2)2]NO3·H2O}∞ (3) and {[Ag(L2)2]ClO4}∞ (4), were synthesized using the thiomorpholine-4-carbonitrile (L1) and piperazine-1,4-dicarbonitrile (L2) ligands. Compounds 1 and 2 are two-dimensional, while 3 and 4 are three-dimensional. L1 and L2 are 1,4-bis-monodentate ligands in all compounds, while Ag(I) ions are four-coordinated in a slightly distorted tetrahedral geometry. Topological analysis in standard representations suggests that underlying nets in 1 and 2 have an sql topology, while 3 and 4 exhibit a dia topology. Thermal analysis shows that 3 loses crystalline water at room temperature, while other compounds show good thermal stability. All compounds show good photocatalytic activity for photocatalytic degradation of the mordant blue 9 dye, with reaction rates in the range 0.029 to 0.061 min−1. The best result was obtained for compound 4, which can be correlated to its largest lattice volume.
PB  - Royal Society of Chemistry (RSC)
T2  - CrystEngComm
T1  - Crystallographic Information for the article: Ristić, P., Filipović, N., Blagojević, V. A., Ćirković, J., Holló, B. B., Đokić, V. R., Donnard, M., Gulea, M., Marjanović, I., Klisurić, O. R.,& Todorović, T. R. (2021). 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior. CrystEngComm, Royal Society of Chemistry (RSC), 23(27), 4799-4815. https://doi.org/10.1039/D1CE00394A
VL  - 23
IS  - 27
UR  - https://hdl.handle.net/21.15107/rcub_dais_11761
ER  - 
@misc{
author = "Ristić, Predrag and Filipović, Nenad and Blagojević, Vladimir A. and Ćirković, Jovana and Holló, Berta Barta and Đokić, Veljko R. and Donnard, Morgan and Gulea, Mihaela and Marjanović, Ivana and Klisurić, Olivera R. and Todorović, Tamara R.",
year = "2021",
abstract = "Four silver-based coordination polymers, {[Ag(L1)2]NO3}∞ (1), {[Ag(L1)2]ClO4}∞ (2), {[Ag(L2)2]NO3·H2O}∞ (3) and {[Ag(L2)2]ClO4}∞ (4), were synthesized using the thiomorpholine-4-carbonitrile (L1) and piperazine-1,4-dicarbonitrile (L2) ligands. Compounds 1 and 2 are two-dimensional, while 3 and 4 are three-dimensional. L1 and L2 are 1,4-bis-monodentate ligands in all compounds, while Ag(I) ions are four-coordinated in a slightly distorted tetrahedral geometry. Topological analysis in standard representations suggests that underlying nets in 1 and 2 have an sql topology, while 3 and 4 exhibit a dia topology. Thermal analysis shows that 3 loses crystalline water at room temperature, while other compounds show good thermal stability. All compounds show good photocatalytic activity for photocatalytic degradation of the mordant blue 9 dye, with reaction rates in the range 0.029 to 0.061 min−1. The best result was obtained for compound 4, which can be correlated to its largest lattice volume.",
publisher = "Royal Society of Chemistry (RSC)",
journal = "CrystEngComm",
title = "Crystallographic Information for the article: Ristić, P., Filipović, N., Blagojević, V. A., Ćirković, J., Holló, B. B., Đokić, V. R., Donnard, M., Gulea, M., Marjanović, I., Klisurić, O. R.,& Todorović, T. R. (2021). 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior. CrystEngComm, Royal Society of Chemistry (RSC), 23(27), 4799-4815. https://doi.org/10.1039/D1CE00394A",
volume = "23",
number = "27",
url = "https://hdl.handle.net/21.15107/rcub_dais_11761"
}
Ristić, P., Filipović, N., Blagojević, V. A., Ćirković, J., Holló, B. B., Đokić, V. R., Donnard, M., Gulea, M., Marjanović, I., Klisurić, O. R.,& Todorović, T. R.. (2021). Crystallographic Information for the article: Ristić, P., Filipović, N., Blagojević, V. A., Ćirković, J., Holló, B. B., Đokić, V. R., Donnard, M., Gulea, M., Marjanović, I., Klisurić, O. R.,& Todorović, T. R. (2021). 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior. CrystEngComm, Royal Society of Chemistry (RSC), 23(27), 4799-4815. https://doi.org/10.1039/D1CE00394A. in CrystEngComm
Royal Society of Chemistry (RSC)., 23(27).
https://hdl.handle.net/21.15107/rcub_dais_11761
Ristić P, Filipović N, Blagojević VA, Ćirković J, Holló BB, Đokić VR, Donnard M, Gulea M, Marjanović I, Klisurić OR, Todorović TR. Crystallographic Information for the article: Ristić, P., Filipović, N., Blagojević, V. A., Ćirković, J., Holló, B. B., Đokić, V. R., Donnard, M., Gulea, M., Marjanović, I., Klisurić, O. R.,& Todorović, T. R. (2021). 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior. CrystEngComm, Royal Society of Chemistry (RSC), 23(27), 4799-4815. https://doi.org/10.1039/D1CE00394A. in CrystEngComm. 2021;23(27).
https://hdl.handle.net/21.15107/rcub_dais_11761 .
Ristić, Predrag, Filipović, Nenad, Blagojević, Vladimir A., Ćirković, Jovana, Holló, Berta Barta, Đokić, Veljko R., Donnard, Morgan, Gulea, Mihaela, Marjanović, Ivana, Klisurić, Olivera R., Todorović, Tamara R., "Crystallographic Information for the article: Ristić, P., Filipović, N., Blagojević, V. A., Ćirković, J., Holló, B. B., Đokić, V. R., Donnard, M., Gulea, M., Marjanović, I., Klisurić, O. R.,& Todorović, T. R. (2021). 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior. CrystEngComm, Royal Society of Chemistry (RSC), 23(27), 4799-4815. https://doi.org/10.1039/D1CE00394A" in CrystEngComm, 23, no. 27 (2021),
https://hdl.handle.net/21.15107/rcub_dais_11761 .

Supplementary information for the article: Ristić, P., Filipović, N., Blagojević, V. A., Ćirković, J., Holló, B. B., Đokić, V. R., Donnard, M., Gulea, M., Marjanović, I., Klisurić, O. R.,& Todorović, T. R. (2021). 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior. CrystEngComm, Royal Society of Chemistry (RSC), 23(27), 4799-4815. https://doi.org/10.1039/D1CE00394A

Ristić, Predrag; Filipović, Nenad; Blagojević, Vladimir A.; Ćirković, Jovana; Holló, Berta Barta; Đokić, Veljko R.; Donnard, Morgan; Gulea, Mihaela; Marjanović, Ivana; Klisurić, Olivera R.; Todorović, Tamara R.

(Royal Society of Chemistry (RSC), 2021)

TY  - DATA
AU  - Ristić, Predrag
AU  - Filipović, Nenad
AU  - Blagojević, Vladimir A.
AU  - Ćirković, Jovana
AU  - Holló, Berta Barta
AU  - Đokić, Veljko R.
AU  - Donnard, Morgan
AU  - Gulea, Mihaela
AU  - Marjanović, Ivana
AU  - Klisurić, Olivera R.
AU  - Todorović, Tamara R.
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11759
AB  - Four silver-based coordination polymers, {[Ag(L1)2]NO3}∞ (1), {[Ag(L1)2]ClO4}∞ (2), {[Ag(L2)2]NO3·H2O}∞ (3) and {[Ag(L2)2]ClO4}∞ (4), were synthesized using the thiomorpholine-4-carbonitrile (L1) and piperazine-1,4-dicarbonitrile (L2) ligands. Compounds 1 and 2 are two-dimensional, while 3 and 4 are three-dimensional. L1 and L2 are 1,4-bis-monodentate ligands in all compounds, while Ag(I) ions are four-coordinated in a slightly distorted tetrahedral geometry. The supplementary ifnormation contains: Selected hydrogen-bond parameters for 3, solid-state optical absorption spectra for crystalline samples of 1–4, plots of concentration ratios against irradiation time for 1–4 and Degussa P25, the changes in photodegradation percentage of MB9 after three successive cycles for 4, IR spectra of pristine and CP 4 after the third cycle and UV–vis spectra for the MB9 solution in the presence of 4 and quenchers. CCDC numbers are 2068533–2068536 for compounds 1–4, respectively.
PB  - Royal Society of Chemistry (RSC)
T2  - CrystEngComm
T1  - Supplementary information for the article: Ristić, P., Filipović, N., Blagojević, V. A., Ćirković, J., Holló, B. B., Đokić, V. R., Donnard, M., Gulea, M., Marjanović, I., Klisurić, O. R.,& Todorović, T. R. (2021). 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior. CrystEngComm, Royal Society of Chemistry (RSC), 23(27), 4799-4815. https://doi.org/10.1039/D1CE00394A
VL  - 23
IS  - 27
UR  - https://hdl.handle.net/21.15107/rcub_dais_11759
ER  - 
@misc{
author = "Ristić, Predrag and Filipović, Nenad and Blagojević, Vladimir A. and Ćirković, Jovana and Holló, Berta Barta and Đokić, Veljko R. and Donnard, Morgan and Gulea, Mihaela and Marjanović, Ivana and Klisurić, Olivera R. and Todorović, Tamara R.",
year = "2021",
abstract = "Four silver-based coordination polymers, {[Ag(L1)2]NO3}∞ (1), {[Ag(L1)2]ClO4}∞ (2), {[Ag(L2)2]NO3·H2O}∞ (3) and {[Ag(L2)2]ClO4}∞ (4), were synthesized using the thiomorpholine-4-carbonitrile (L1) and piperazine-1,4-dicarbonitrile (L2) ligands. Compounds 1 and 2 are two-dimensional, while 3 and 4 are three-dimensional. L1 and L2 are 1,4-bis-monodentate ligands in all compounds, while Ag(I) ions are four-coordinated in a slightly distorted tetrahedral geometry. The supplementary ifnormation contains: Selected hydrogen-bond parameters for 3, solid-state optical absorption spectra for crystalline samples of 1–4, plots of concentration ratios against irradiation time for 1–4 and Degussa P25, the changes in photodegradation percentage of MB9 after three successive cycles for 4, IR spectra of pristine and CP 4 after the third cycle and UV–vis spectra for the MB9 solution in the presence of 4 and quenchers. CCDC numbers are 2068533–2068536 for compounds 1–4, respectively.",
publisher = "Royal Society of Chemistry (RSC)",
journal = "CrystEngComm",
title = "Supplementary information for the article: Ristić, P., Filipović, N., Blagojević, V. A., Ćirković, J., Holló, B. B., Đokić, V. R., Donnard, M., Gulea, M., Marjanović, I., Klisurić, O. R.,& Todorović, T. R. (2021). 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior. CrystEngComm, Royal Society of Chemistry (RSC), 23(27), 4799-4815. https://doi.org/10.1039/D1CE00394A",
volume = "23",
number = "27",
url = "https://hdl.handle.net/21.15107/rcub_dais_11759"
}
Ristić, P., Filipović, N., Blagojević, V. A., Ćirković, J., Holló, B. B., Đokić, V. R., Donnard, M., Gulea, M., Marjanović, I., Klisurić, O. R.,& Todorović, T. R.. (2021). Supplementary information for the article: Ristić, P., Filipović, N., Blagojević, V. A., Ćirković, J., Holló, B. B., Đokić, V. R., Donnard, M., Gulea, M., Marjanović, I., Klisurić, O. R.,& Todorović, T. R. (2021). 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior. CrystEngComm, Royal Society of Chemistry (RSC), 23(27), 4799-4815. https://doi.org/10.1039/D1CE00394A. in CrystEngComm
Royal Society of Chemistry (RSC)., 23(27).
https://hdl.handle.net/21.15107/rcub_dais_11759
Ristić P, Filipović N, Blagojević VA, Ćirković J, Holló BB, Đokić VR, Donnard M, Gulea M, Marjanović I, Klisurić OR, Todorović TR. Supplementary information for the article: Ristić, P., Filipović, N., Blagojević, V. A., Ćirković, J., Holló, B. B., Đokić, V. R., Donnard, M., Gulea, M., Marjanović, I., Klisurić, O. R.,& Todorović, T. R. (2021). 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior. CrystEngComm, Royal Society of Chemistry (RSC), 23(27), 4799-4815. https://doi.org/10.1039/D1CE00394A. in CrystEngComm. 2021;23(27).
https://hdl.handle.net/21.15107/rcub_dais_11759 .
Ristić, Predrag, Filipović, Nenad, Blagojević, Vladimir A., Ćirković, Jovana, Holló, Berta Barta, Đokić, Veljko R., Donnard, Morgan, Gulea, Mihaela, Marjanović, Ivana, Klisurić, Olivera R., Todorović, Tamara R., "Supplementary information for the article: Ristić, P., Filipović, N., Blagojević, V. A., Ćirković, J., Holló, B. B., Đokić, V. R., Donnard, M., Gulea, M., Marjanović, I., Klisurić, O. R.,& Todorović, T. R. (2021). 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior. CrystEngComm, Royal Society of Chemistry (RSC), 23(27), 4799-4815. https://doi.org/10.1039/D1CE00394A" in CrystEngComm, 23, no. 27 (2021),
https://hdl.handle.net/21.15107/rcub_dais_11759 .

The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution

Georgijević, Radovan; Vujković, Milica; Gutić, Sanjin; Aliefendić, Meho; Jugović, Dragana; Mitrić, Miodrag; Đokić, Veljko; Mentus, Slavko

(Elsevier, 2019)

TY  - JOUR
AU  - Georgijević, Radovan
AU  - Vujković, Milica
AU  - Gutić, Sanjin
AU  - Aliefendić, Meho
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
AU  - Đokić, Veljko
AU  - Mentus, Slavko
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0925838818339185
UR  - https://dais.sanu.ac.rs/123456789/4569
AB  - To contribute to the knowledge on the influence of synthesis procedure on the intercalation kinetics of lithium ions into phospho-olivines, LiFePO4/C composite samples (LFPC) were synthesized in two ways, the first one in a sol-gel procedure (SG), and the other in a solid-state reaction (SS). The X-ray diffractograms (XRD) of both samples overlapped with that of pure LiFePO4, taken from the crystallographic database. Scanning electron microscopy pictures indicated the high degree of interparticle sintering, which caused a considerable agglomerate growth. The results of potentiodynamic measurements in aqueous LiNO3 solution revealed that for SS sample, three times higher initial capacity from that of SG one, (amounting to 74 mAh g−1 at 5 mV s−1). However, capacity fade on rising scan rate is much more expressed for SS sample than for SG one. We suggest that a different degree of material utilization due to the incomplete coverage of olivine particles by carbon explains this difference. The technique of separation of diffusion and capacitance currents was applied in a kinetic analysis, but it was shown to be inappropriate. We suggest the inapplicability of classic CV theory to the intercalation system accompanied by phase transition. Instead, a model of ohmic resistance determination of process kinetics was considered. LFPC-SS sample delivers three times larger capacity in LiNO3, amounting to 74 mAh g−1 at 1 mV s−1.
PB  - Elsevier
T2  - Journal of Alloys and Compounds
T1  - The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution
SP  - 475
EP  - 485
VL  - 776
DO  - 10.1016/j.jallcom.2018.10.246
UR  - https://hdl.handle.net/21.15107/rcub_dais_4569
ER  - 
@article{
author = "Georgijević, Radovan and Vujković, Milica and Gutić, Sanjin and Aliefendić, Meho and Jugović, Dragana and Mitrić, Miodrag and Đokić, Veljko and Mentus, Slavko",
year = "2019",
abstract = "To contribute to the knowledge on the influence of synthesis procedure on the intercalation kinetics of lithium ions into phospho-olivines, LiFePO4/C composite samples (LFPC) were synthesized in two ways, the first one in a sol-gel procedure (SG), and the other in a solid-state reaction (SS). The X-ray diffractograms (XRD) of both samples overlapped with that of pure LiFePO4, taken from the crystallographic database. Scanning electron microscopy pictures indicated the high degree of interparticle sintering, which caused a considerable agglomerate growth. The results of potentiodynamic measurements in aqueous LiNO3 solution revealed that for SS sample, three times higher initial capacity from that of SG one, (amounting to 74 mAh g−1 at 5 mV s−1). However, capacity fade on rising scan rate is much more expressed for SS sample than for SG one. We suggest that a different degree of material utilization due to the incomplete coverage of olivine particles by carbon explains this difference. The technique of separation of diffusion and capacitance currents was applied in a kinetic analysis, but it was shown to be inappropriate. We suggest the inapplicability of classic CV theory to the intercalation system accompanied by phase transition. Instead, a model of ohmic resistance determination of process kinetics was considered. LFPC-SS sample delivers three times larger capacity in LiNO3, amounting to 74 mAh g−1 at 1 mV s−1.",
publisher = "Elsevier",
journal = "Journal of Alloys and Compounds",
title = "The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution",
pages = "475-485",
volume = "776",
doi = "10.1016/j.jallcom.2018.10.246",
url = "https://hdl.handle.net/21.15107/rcub_dais_4569"
}
Georgijević, R., Vujković, M., Gutić, S., Aliefendić, M., Jugović, D., Mitrić, M., Đokić, V.,& Mentus, S.. (2019). The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. in Journal of Alloys and Compounds
Elsevier., 776, 475-485.
https://doi.org/10.1016/j.jallcom.2018.10.246
https://hdl.handle.net/21.15107/rcub_dais_4569
Georgijević R, Vujković M, Gutić S, Aliefendić M, Jugović D, Mitrić M, Đokić V, Mentus S. The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. in Journal of Alloys and Compounds. 2019;776:475-485.
doi:10.1016/j.jallcom.2018.10.246
https://hdl.handle.net/21.15107/rcub_dais_4569 .
Georgijević, Radovan, Vujković, Milica, Gutić, Sanjin, Aliefendić, Meho, Jugović, Dragana, Mitrić, Miodrag, Đokić, Veljko, Mentus, Slavko, "The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution" in Journal of Alloys and Compounds, 776 (2019):475-485,
https://doi.org/10.1016/j.jallcom.2018.10.246 .,
https://hdl.handle.net/21.15107/rcub_dais_4569 .
8
8
8

Supporting material for the article: Georgijević, R., Vujković, M., Gutić, S., Aliefendić, M., Jugović, D., Mitrić, M., Đokić, V., Mentus, S., 2019. The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. Journal of Alloys and Compounds 776, 475–485. https://doi.org/10.1016/j.jallcom.2018.10.246

Georgijević, Radovan; Vujković, Milica; Gutić, Sanjin; Aliefendić, Meho; Jugović, Dragana; Mitrić, Miodrag; Đokić, Veljko; Mentus, Slavko

(2019)

TY  - DATA
AU  - Georgijević, Radovan
AU  - Vujković, Milica
AU  - Gutić, Sanjin
AU  - Aliefendić, Meho
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
AU  - Đokić, Veljko
AU  - Mentus, Slavko
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0925838818339185
UR  - https://dais.sanu.ac.rs/123456789/5975
AB  - CVs of LFPC prepared by sol-gel (a) and solid-state (b) procedure, measured in LiNO3 aqueous solution at a common scan rate of 20 mV s-1 during 10 successive cycles
T2  - Journal of Alloys and Compounds
T1  - Supporting material for the article: Georgijević, R., Vujković, M., Gutić, S., Aliefendić, M., Jugović, D., Mitrić, M., Đokić, V., Mentus, S., 2019. The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. Journal of Alloys and Compounds 776, 475–485. https://doi.org/10.1016/j.jallcom.2018.10.246
UR  - https://hdl.handle.net/21.15107/rcub_dais_5975
ER  - 
@misc{
author = "Georgijević, Radovan and Vujković, Milica and Gutić, Sanjin and Aliefendić, Meho and Jugović, Dragana and Mitrić, Miodrag and Đokić, Veljko and Mentus, Slavko",
year = "2019",
abstract = "CVs of LFPC prepared by sol-gel (a) and solid-state (b) procedure, measured in LiNO3 aqueous solution at a common scan rate of 20 mV s-1 during 10 successive cycles",
journal = "Journal of Alloys and Compounds",
title = "Supporting material for the article: Georgijević, R., Vujković, M., Gutić, S., Aliefendić, M., Jugović, D., Mitrić, M., Đokić, V., Mentus, S., 2019. The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. Journal of Alloys and Compounds 776, 475–485. https://doi.org/10.1016/j.jallcom.2018.10.246",
url = "https://hdl.handle.net/21.15107/rcub_dais_5975"
}
Georgijević, R., Vujković, M., Gutić, S., Aliefendić, M., Jugović, D., Mitrić, M., Đokić, V.,& Mentus, S.. (2019). Supporting material for the article: Georgijević, R., Vujković, M., Gutić, S., Aliefendić, M., Jugović, D., Mitrić, M., Đokić, V., Mentus, S., 2019. The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. Journal of Alloys and Compounds 776, 475–485. https://doi.org/10.1016/j.jallcom.2018.10.246. in Journal of Alloys and Compounds.
https://hdl.handle.net/21.15107/rcub_dais_5975
Georgijević R, Vujković M, Gutić S, Aliefendić M, Jugović D, Mitrić M, Đokić V, Mentus S. Supporting material for the article: Georgijević, R., Vujković, M., Gutić, S., Aliefendić, M., Jugović, D., Mitrić, M., Đokić, V., Mentus, S., 2019. The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. Journal of Alloys and Compounds 776, 475–485. https://doi.org/10.1016/j.jallcom.2018.10.246. in Journal of Alloys and Compounds. 2019;.
https://hdl.handle.net/21.15107/rcub_dais_5975 .
Georgijević, Radovan, Vujković, Milica, Gutić, Sanjin, Aliefendić, Meho, Jugović, Dragana, Mitrić, Miodrag, Đokić, Veljko, Mentus, Slavko, "Supporting material for the article: Georgijević, R., Vujković, M., Gutić, S., Aliefendić, M., Jugović, D., Mitrić, M., Đokić, V., Mentus, S., 2019. The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. Journal of Alloys and Compounds 776, 475–485. https://doi.org/10.1016/j.jallcom.2018.10.246" in Journal of Alloys and Compounds (2019),
https://hdl.handle.net/21.15107/rcub_dais_5975 .

Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping

Vujančević, Jelena; Andričević, Pavao; Bjelajac, Anđelika; Đokić, Veljko; Popović, Maja; Rakočević, Zlatko; Horváth, Endre; Kollár, Márton; Náfrádi, Bálint; Schiller, Andreas; Domanski, Konrad; Forró, Laszlo; Pavlović, Vera P.; Janaćković, Đorđe

(Elsevier, 2019)

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Andričević, Pavao
AU  - Bjelajac, Anđelika
AU  - Đokić, Veljko
AU  - Popović, Maja
AU  - Rakočević, Zlatko
AU  - Horváth, Endre
AU  - Kollár, Márton
AU  - Náfrádi, Bálint
AU  - Schiller, Andreas
AU  - Domanski, Konrad
AU  - Forró, Laszlo
AU  - Pavlović, Vera P.
AU  - Janaćković, Đorđe
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/5084
AB  - Highly ordered, anodically grown TiO 2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping (≤2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes with an average outer diameter of 101.5 ± 1.5 nm and an average wall thickness of about 13 nm. Anatase crystals were formed inside the tubes after annealing in ammonia atmosphere for 30 min. With further annealing, rutile peaks appeared due to the thermal oxidation of the foil and rise as the duration of heat treatment was increased. The concentration and chemical nature of nitrogen in the nanotube arrays can be correlated to the optical response of dry-pressed heterojunctions of doped TiO 2 /CH 3 NH 3 PbI 3 single crystals. The N-TiO 2 /perovskite heterojunction with the highest amount of interstitial nitrogen exhibited an improved photocurrent, indicating the importance of the semiconductor doping-based heterojunction optimization strategies to deliver competitive levels of halide perovskite-based optoelectronic devices to be envisioned for urban infrastructures. © 2019
PB  - Elsevier
T2  - Ceramics International
T1  - Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping
SP  - 10013
EP  - 10020
VL  - 45
IS  - 8
DO  - 10.1016/j.ceramint.2019.02.045
UR  - https://hdl.handle.net/21.15107/rcub_dais_5084
ER  - 
@article{
author = "Vujančević, Jelena and Andričević, Pavao and Bjelajac, Anđelika and Đokić, Veljko and Popović, Maja and Rakočević, Zlatko and Horváth, Endre and Kollár, Márton and Náfrádi, Bálint and Schiller, Andreas and Domanski, Konrad and Forró, Laszlo and Pavlović, Vera P. and Janaćković, Đorđe",
year = "2019",
abstract = "Highly ordered, anodically grown TiO 2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping (≤2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes with an average outer diameter of 101.5 ± 1.5 nm and an average wall thickness of about 13 nm. Anatase crystals were formed inside the tubes after annealing in ammonia atmosphere for 30 min. With further annealing, rutile peaks appeared due to the thermal oxidation of the foil and rise as the duration of heat treatment was increased. The concentration and chemical nature of nitrogen in the nanotube arrays can be correlated to the optical response of dry-pressed heterojunctions of doped TiO 2 /CH 3 NH 3 PbI 3 single crystals. The N-TiO 2 /perovskite heterojunction with the highest amount of interstitial nitrogen exhibited an improved photocurrent, indicating the importance of the semiconductor doping-based heterojunction optimization strategies to deliver competitive levels of halide perovskite-based optoelectronic devices to be envisioned for urban infrastructures. © 2019",
publisher = "Elsevier",
journal = "Ceramics International",
title = "Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping",
pages = "10013-10020",
volume = "45",
number = "8",
doi = "10.1016/j.ceramint.2019.02.045",
url = "https://hdl.handle.net/21.15107/rcub_dais_5084"
}
Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V. P.,& Janaćković, Đ.. (2019). Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. in Ceramics International
Elsevier., 45(8), 10013-10020.
https://doi.org/10.1016/j.ceramint.2019.02.045
https://hdl.handle.net/21.15107/rcub_dais_5084
Vujančević J, Andričević P, Bjelajac A, Đokić V, Popović M, Rakočević Z, Horváth E, Kollár M, Náfrádi B, Schiller A, Domanski K, Forró L, Pavlović VP, Janaćković Đ. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. in Ceramics International. 2019;45(8):10013-10020.
doi:10.1016/j.ceramint.2019.02.045
https://hdl.handle.net/21.15107/rcub_dais_5084 .
Vujančević, Jelena, Andričević, Pavao, Bjelajac, Anđelika, Đokić, Veljko, Popović, Maja, Rakočević, Zlatko, Horváth, Endre, Kollár, Márton, Náfrádi, Bálint, Schiller, Andreas, Domanski, Konrad, Forró, Laszlo, Pavlović, Vera P., Janaćković, Đorđe, "Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping" in Ceramics International, 45, no. 8 (2019):10013-10020,
https://doi.org/10.1016/j.ceramint.2019.02.045 .,
https://hdl.handle.net/21.15107/rcub_dais_5084 .
4
2
1

Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping

Vujančević, Jelena; Andričević, Pavao; Bjelajac, Anđelika; Đokić, Veljko; Popović, Maja; Rakočević, Zlatko; Horváth, Endre; Kollár, Márton; Náfrádi, Bálint; Schiller, Andreas; Domanski, Konrad; Forró, Laszlo; Pavlović, Vera P.; Janaćković, Đorđe

(Elsevier, 2019)

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Andričević, Pavao
AU  - Bjelajac, Anđelika
AU  - Đokić, Veljko
AU  - Popović, Maja
AU  - Rakočević, Zlatko
AU  - Horváth, Endre
AU  - Kollár, Márton
AU  - Náfrádi, Bálint
AU  - Schiller, Andreas
AU  - Domanski, Konrad
AU  - Forró, Laszlo
AU  - Pavlović, Vera P.
AU  - Janaćković, Đorđe
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/5765
AB  - Highly ordered, anodically grown TiO 2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping (≤2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes with an average outer diameter of 101.5 ± 1.5 nm and an average wall thickness of about 13 nm. Anatase crystals were formed inside the tubes after annealing in ammonia atmosphere for 30 min. With further annealing, rutile peaks appeared due to the thermal oxidation of the foil and rise as the duration of heat treatment was increased. The concentration and chemical nature of nitrogen in the nanotube arrays can be correlated to the optical response of dry-pressed heterojunctions of doped TiO 2 /CH 3 NH 3 PbI 3 single crystals. The N-TiO 2 /perovskite heterojunction with the highest amount of interstitial nitrogen exhibited an improved photocurrent, indicating the importance of the semiconductor doping-based heterojunction optimization strategies to deliver competitive levels of halide perovskite-based optoelectronic devices to be envisioned for urban infrastructures. © 2019
PB  - Elsevier
T2  - Ceramics International
T1  - Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping
SP  - 10013
EP  - 10020
VL  - 45
IS  - 8
DO  - 10.1016/j.ceramint.2019.02.045
UR  - https://hdl.handle.net/21.15107/rcub_dais_5765
ER  - 
@article{
author = "Vujančević, Jelena and Andričević, Pavao and Bjelajac, Anđelika and Đokić, Veljko and Popović, Maja and Rakočević, Zlatko and Horváth, Endre and Kollár, Márton and Náfrádi, Bálint and Schiller, Andreas and Domanski, Konrad and Forró, Laszlo and Pavlović, Vera P. and Janaćković, Đorđe",
year = "2019",
abstract = "Highly ordered, anodically grown TiO 2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping (≤2 at.%) in the titanium oxide lattice. FESEM micrographs revealed nanotubes with an average outer diameter of 101.5 ± 1.5 nm and an average wall thickness of about 13 nm. Anatase crystals were formed inside the tubes after annealing in ammonia atmosphere for 30 min. With further annealing, rutile peaks appeared due to the thermal oxidation of the foil and rise as the duration of heat treatment was increased. The concentration and chemical nature of nitrogen in the nanotube arrays can be correlated to the optical response of dry-pressed heterojunctions of doped TiO 2 /CH 3 NH 3 PbI 3 single crystals. The N-TiO 2 /perovskite heterojunction with the highest amount of interstitial nitrogen exhibited an improved photocurrent, indicating the importance of the semiconductor doping-based heterojunction optimization strategies to deliver competitive levels of halide perovskite-based optoelectronic devices to be envisioned for urban infrastructures. © 2019",
publisher = "Elsevier",
journal = "Ceramics International",
title = "Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping",
pages = "10013-10020",
volume = "45",
number = "8",
doi = "10.1016/j.ceramint.2019.02.045",
url = "https://hdl.handle.net/21.15107/rcub_dais_5765"
}
Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V. P.,& Janaćković, Đ.. (2019). Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. in Ceramics International
Elsevier., 45(8), 10013-10020.
https://doi.org/10.1016/j.ceramint.2019.02.045
https://hdl.handle.net/21.15107/rcub_dais_5765
Vujančević J, Andričević P, Bjelajac A, Đokić V, Popović M, Rakočević Z, Horváth E, Kollár M, Náfrádi B, Schiller A, Domanski K, Forró L, Pavlović VP, Janaćković Đ. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. in Ceramics International. 2019;45(8):10013-10020.
doi:10.1016/j.ceramint.2019.02.045
https://hdl.handle.net/21.15107/rcub_dais_5765 .
Vujančević, Jelena, Andričević, Pavao, Bjelajac, Anđelika, Đokić, Veljko, Popović, Maja, Rakočević, Zlatko, Horváth, Endre, Kollár, Márton, Náfrádi, Bálint, Schiller, Andreas, Domanski, Konrad, Forró, Laszlo, Pavlović, Vera P., Janaćković, Đorđe, "Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping" in Ceramics International, 45, no. 8 (2019):10013-10020,
https://doi.org/10.1016/j.ceramint.2019.02.045 .,
https://hdl.handle.net/21.15107/rcub_dais_5765 .
4
2
1

Supporting information for the article: Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V., Janaćković, Đ., 2019. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International 45, 10013–10020. https://doi.org/10.1016/j.ceramint.2019.02.045

Vujančević, Jelena; Andričević, Pavao; Bjelajac, Anđelika; Đokić, Veljko; Popović, Maja; Rakočević, Zlatko; Horváth, Endre; Kollár, Márton; Náfrádi, Bálint; Schiller, Andreas; Domanski, Konrad; Forró, Laszlo; Pavlović, Vera P.; Janaćković, Đorđe

(2019)

TY  - DATA
AU  - Vujančević, Jelena
AU  - Andričević, Pavao
AU  - Bjelajac, Anđelika
AU  - Đokić, Veljko
AU  - Popović, Maja
AU  - Rakočević, Zlatko
AU  - Horváth, Endre
AU  - Kollár, Márton
AU  - Náfrádi, Bálint
AU  - Schiller, Andreas
AU  - Domanski, Konrad
AU  - Forró, Laszlo
AU  - Pavlović, Vera P.
AU  - Janaćković, Đorđe
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/5969
AB  - Table S1. Reported methods for nitrogen doping of anodized TiO2 nanotube arrays; Figure S1. SEM images and statistical distributions of outer diameters obtained by analyzing SEM micrographs of 100 nanotubes; Table S2. Average morphology parameters for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples; Table S3. Average crystals size for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples; Figure S2. Deconvoluted XPS spectra of N 1s core level of Ti foil (black line-experimental, grey line-background, magenta line-envelope); Table S4. Peak positions and atomic percentages of N1s core levels for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples; Table S5. Positions and atomic percentages of Ti 2p3/2 and O1s core peaks for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples; Figure S3. The time evolution of the current during the preconditioning of the TiO2/perovskite sample at a bias voltage of 100 V for 75 sec. Dashed line is the logarithmic fit of the base line of the current time evolution; Figure S4. Ideality factor for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples
T2  - Ceramics International
T1  - Supporting information for the article: Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V., Janaćković, Đ., 2019. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International 45, 10013–10020. https://doi.org/10.1016/j.ceramint.2019.02.045
UR  - https://hdl.handle.net/21.15107/rcub_dais_5969
ER  - 
@misc{
author = "Vujančević, Jelena and Andričević, Pavao and Bjelajac, Anđelika and Đokić, Veljko and Popović, Maja and Rakočević, Zlatko and Horváth, Endre and Kollár, Márton and Náfrádi, Bálint and Schiller, Andreas and Domanski, Konrad and Forró, Laszlo and Pavlović, Vera P. and Janaćković, Đorđe",
year = "2019",
abstract = "Table S1. Reported methods for nitrogen doping of anodized TiO2 nanotube arrays; Figure S1. SEM images and statistical distributions of outer diameters obtained by analyzing SEM micrographs of 100 nanotubes; Table S2. Average morphology parameters for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples; Table S3. Average crystals size for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples; Figure S2. Deconvoluted XPS spectra of N 1s core level of Ti foil (black line-experimental, grey line-background, magenta line-envelope); Table S4. Peak positions and atomic percentages of N1s core levels for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples; Table S5. Positions and atomic percentages of Ti 2p3/2 and O1s core peaks for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples; Figure S3. The time evolution of the current during the preconditioning of the TiO2/perovskite sample at a bias voltage of 100 V for 75 sec. Dashed line is the logarithmic fit of the base line of the current time evolution; Figure S4. Ideality factor for TiO2-undoped, TiO2-N30, TiO2-N60 and TiO2-N90 samples",
journal = "Ceramics International",
title = "Supporting information for the article: Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V., Janaćković, Đ., 2019. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International 45, 10013–10020. https://doi.org/10.1016/j.ceramint.2019.02.045",
url = "https://hdl.handle.net/21.15107/rcub_dais_5969"
}
Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V. P.,& Janaćković, Đ.. (2019). Supporting information for the article: Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V., Janaćković, Đ., 2019. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International 45, 10013–10020. https://doi.org/10.1016/j.ceramint.2019.02.045. in Ceramics International.
https://hdl.handle.net/21.15107/rcub_dais_5969
Vujančević J, Andričević P, Bjelajac A, Đokić V, Popović M, Rakočević Z, Horváth E, Kollár M, Náfrádi B, Schiller A, Domanski K, Forró L, Pavlović VP, Janaćković Đ. Supporting information for the article: Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V., Janaćković, Đ., 2019. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International 45, 10013–10020. https://doi.org/10.1016/j.ceramint.2019.02.045. in Ceramics International. 2019;.
https://hdl.handle.net/21.15107/rcub_dais_5969 .
Vujančević, Jelena, Andričević, Pavao, Bjelajac, Anđelika, Đokić, Veljko, Popović, Maja, Rakočević, Zlatko, Horváth, Endre, Kollár, Márton, Náfrádi, Bálint, Schiller, Andreas, Domanski, Konrad, Forró, Laszlo, Pavlović, Vera P., Janaćković, Đorđe, "Supporting information for the article: Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V., Janaćković, Đ., 2019. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International 45, 10013–10020. https://doi.org/10.1016/j.ceramint.2019.02.045" in Ceramics International (2019),
https://hdl.handle.net/21.15107/rcub_dais_5969 .

The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution

Georgijević, Radovan; Vujković, Milica; Gutić, Sanjin; Aliefendić, Meho; Jugović, Dragana; Mitrić, Miodrag; Đokić, Veljko; Mentus, Slavko

(Elsevier, 2019)

TY  - JOUR
AU  - Georgijević, Radovan
AU  - Vujković, Milica
AU  - Gutić, Sanjin
AU  - Aliefendić, Meho
AU  - Jugović, Dragana
AU  - Mitrić, Miodrag
AU  - Đokić, Veljko
AU  - Mentus, Slavko
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0925838818339185
UR  - https://dais.sanu.ac.rs/123456789/4568
AB  - To contribute to the knowledge on the influence of synthesis procedure on the intercalation kinetics of lithium ions into phospho-olivines, LiFePO4/C composite samples (LFPC) were synthesized in two ways, the first one in a sol-gel procedure (SG), and the other in a solid-state reaction (SS). The X-ray diffractograms (XRD) of both samples overlapped with that of pure LiFePO4, taken from the crystallographic database. Scanning electron microscopy pictures indicated the high degree of interparticle sintering, which caused a considerable agglomerate growth. The results of potentiodynamic measurements in aqueous LiNO3 solution revealed that for SS sample, three times higher initial capacity from that of SG one, (amounting to 74 mAh g−1 at 5 mV s−1). However, capacity fade on rising scan rate is much more expressed for SS sample than for SG one. We suggest that a different degree of material utilization due to the incomplete coverage of olivine particles by carbon explains this difference. The technique of separation of diffusion and capacitance currents was applied in a kinetic analysis, but it was shown to be inappropriate. We suggest the inapplicability of classic CV theory to the intercalation system accompanied by phase transition. Instead, a model of ohmic resistance determination of process kinetics was considered. LFPC-SS sample delivers three times larger capacity in LiNO3, amounting to 74 mAh g−1 at 1 mV s−1.
PB  - Elsevier
T2  - Journal of Alloys and Compounds
T1  - The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution
SP  - 475
EP  - 485
VL  - 776
DO  - 10.1016/j.jallcom.2018.10.246
UR  - https://hdl.handle.net/21.15107/rcub_dais_4568
ER  - 
@article{
author = "Georgijević, Radovan and Vujković, Milica and Gutić, Sanjin and Aliefendić, Meho and Jugović, Dragana and Mitrić, Miodrag and Đokić, Veljko and Mentus, Slavko",
year = "2019",
abstract = "To contribute to the knowledge on the influence of synthesis procedure on the intercalation kinetics of lithium ions into phospho-olivines, LiFePO4/C composite samples (LFPC) were synthesized in two ways, the first one in a sol-gel procedure (SG), and the other in a solid-state reaction (SS). The X-ray diffractograms (XRD) of both samples overlapped with that of pure LiFePO4, taken from the crystallographic database. Scanning electron microscopy pictures indicated the high degree of interparticle sintering, which caused a considerable agglomerate growth. The results of potentiodynamic measurements in aqueous LiNO3 solution revealed that for SS sample, three times higher initial capacity from that of SG one, (amounting to 74 mAh g−1 at 5 mV s−1). However, capacity fade on rising scan rate is much more expressed for SS sample than for SG one. We suggest that a different degree of material utilization due to the incomplete coverage of olivine particles by carbon explains this difference. The technique of separation of diffusion and capacitance currents was applied in a kinetic analysis, but it was shown to be inappropriate. We suggest the inapplicability of classic CV theory to the intercalation system accompanied by phase transition. Instead, a model of ohmic resistance determination of process kinetics was considered. LFPC-SS sample delivers three times larger capacity in LiNO3, amounting to 74 mAh g−1 at 1 mV s−1.",
publisher = "Elsevier",
journal = "Journal of Alloys and Compounds",
title = "The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution",
pages = "475-485",
volume = "776",
doi = "10.1016/j.jallcom.2018.10.246",
url = "https://hdl.handle.net/21.15107/rcub_dais_4568"
}
Georgijević, R., Vujković, M., Gutić, S., Aliefendić, M., Jugović, D., Mitrić, M., Đokić, V.,& Mentus, S.. (2019). The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. in Journal of Alloys and Compounds
Elsevier., 776, 475-485.
https://doi.org/10.1016/j.jallcom.2018.10.246
https://hdl.handle.net/21.15107/rcub_dais_4568
Georgijević R, Vujković M, Gutić S, Aliefendić M, Jugović D, Mitrić M, Đokić V, Mentus S. The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution. in Journal of Alloys and Compounds. 2019;776:475-485.
doi:10.1016/j.jallcom.2018.10.246
https://hdl.handle.net/21.15107/rcub_dais_4568 .
Georgijević, Radovan, Vujković, Milica, Gutić, Sanjin, Aliefendić, Meho, Jugović, Dragana, Mitrić, Miodrag, Đokić, Veljko, Mentus, Slavko, "The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution" in Journal of Alloys and Compounds, 776 (2019):475-485,
https://doi.org/10.1016/j.jallcom.2018.10.246 .,
https://hdl.handle.net/21.15107/rcub_dais_4568 .
8
8
8

Supplementary material for: Rusmirović, J.D., Ivanović, J.Z., Pavlović, V.B., Rakić, V.M., Rančić, M.P., Djokić, V., Marinković, A.D., 2017. Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. Carbohydrate Polymers 164, 64–74. https://doi.org/10.1016/j.carbpol.2017.01.086

Rusmirović, Jelena; Ivanović, Jasna; Pavlović, Vladimir B.; Rakić, Vesna M.; Rančić, Milica P.; Đokić, Veljko; Marinković, Aleksandar D.

(2017)

TY  - DATA
AU  - Rusmirović, Jelena
AU  - Ivanović, Jasna
AU  - Pavlović, Vladimir B.
AU  - Rakić, Vesna M.
AU  - Rančić, Milica P.
AU  - Đokić, Veljko
AU  - Marinković, Aleksandar D.
PY  - 2017
UR  - https://dais.sanu.ac.rs/123456789/5980
AB  - Supplementary material for sections 2 (materials and methods) and 3 (results).
T2  - Carbohydrate Polymers
T1  - Supplementary material for: Rusmirović, J.D., Ivanović, J.Z., Pavlović, V.B., Rakić, V.M., Rančić, M.P., Djokić, V., Marinković, A.D., 2017. Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. Carbohydrate Polymers 164, 64–74. https://doi.org/10.1016/j.carbpol.2017.01.086
UR  - https://hdl.handle.net/21.15107/rcub_dais_5980
ER  - 
@misc{
author = "Rusmirović, Jelena and Ivanović, Jasna and Pavlović, Vladimir B. and Rakić, Vesna M. and Rančić, Milica P. and Đokić, Veljko and Marinković, Aleksandar D.",
year = "2017",
abstract = "Supplementary material for sections 2 (materials and methods) and 3 (results).",
journal = "Carbohydrate Polymers",
title = "Supplementary material for: Rusmirović, J.D., Ivanović, J.Z., Pavlović, V.B., Rakić, V.M., Rančić, M.P., Djokić, V., Marinković, A.D., 2017. Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. Carbohydrate Polymers 164, 64–74. https://doi.org/10.1016/j.carbpol.2017.01.086",
url = "https://hdl.handle.net/21.15107/rcub_dais_5980"
}
Rusmirović, J., Ivanović, J., Pavlović, V. B., Rakić, V. M., Rančić, M. P., Đokić, V.,& Marinković, A. D.. (2017). Supplementary material for: Rusmirović, J.D., Ivanović, J.Z., Pavlović, V.B., Rakić, V.M., Rančić, M.P., Djokić, V., Marinković, A.D., 2017. Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. Carbohydrate Polymers 164, 64–74. https://doi.org/10.1016/j.carbpol.2017.01.086. in Carbohydrate Polymers.
https://hdl.handle.net/21.15107/rcub_dais_5980
Rusmirović J, Ivanović J, Pavlović VB, Rakić VM, Rančić MP, Đokić V, Marinković AD. Supplementary material for: Rusmirović, J.D., Ivanović, J.Z., Pavlović, V.B., Rakić, V.M., Rančić, M.P., Djokić, V., Marinković, A.D., 2017. Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. Carbohydrate Polymers 164, 64–74. https://doi.org/10.1016/j.carbpol.2017.01.086. in Carbohydrate Polymers. 2017;.
https://hdl.handle.net/21.15107/rcub_dais_5980 .
Rusmirović, Jelena, Ivanović, Jasna, Pavlović, Vladimir B., Rakić, Vesna M., Rančić, Milica P., Đokić, Veljko, Marinković, Aleksandar D., "Supplementary material for: Rusmirović, J.D., Ivanović, J.Z., Pavlović, V.B., Rakić, V.M., Rančić, M.P., Djokić, V., Marinković, A.D., 2017. Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. Carbohydrate Polymers 164, 64–74. https://doi.org/10.1016/j.carbpol.2017.01.086" in Carbohydrate Polymers (2017),
https://hdl.handle.net/21.15107/rcub_dais_5980 .

Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites

Rusmirović, Jelena; Ivanović, Jasna; Pavlović, Vladimir B.; Rakić, Vesna M.; Rančić, Milica P.; Đokić, Veljko; Marinković, Aleksandar D.

(Elsevier, 2017)

TY  - JOUR
AU  - Rusmirović, Jelena
AU  - Ivanović, Jasna
AU  - Pavlović, Vladimir B.
AU  - Rakić, Vesna M.
AU  - Rančić, Milica P.
AU  - Đokić, Veljko
AU  - Marinković, Aleksandar D.
PY  - 2017
UR  - https://dais.sanu.ac.rs/123456789/4614
AB  - The influence of modification and vacuum/supercritical CO2 (scCO2) drying methods on the surface properties, morphology and thermal stability of cellulose nanocrystals (NC) was presented in this study. Introduction of reactive vinyl groups on NC surface was performed by either direct esterification with oleic acid, linseed or sunflower oil fatty acids; or by amidation of maleic acid/ethylene diamine with methyl ester of fatty acid. Obtained modified NC (m-NC) were characterized using FTIR and Raman spectroscopy; and by determination of acid, iodine and ester values. Structural analysis of m-NC showed varieties of forms, from spongy to nanostructural non-uniform layered morphology with observable agglomeration, which confirmed morphology dependence on modification/processing methods Thermogravimetry-MS spectrometry showed different thermal stability and degradation pathways of NC/m-NC. Incorporation of 1 wt% of reactive m-NC in unsaturated polyester lead to high performance nanocomposites and contributed to increase of stress at break in the range from 76 to 93%.
PB  - Elsevier
T2  - Carbohydrate Polymers
T1  - Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites
SP  - 64
EP  - 74
VL  - 164
DO  - 10.1016/j.carbpol.2017.01.086
UR  - https://hdl.handle.net/21.15107/rcub_dais_4614
ER  - 
@article{
author = "Rusmirović, Jelena and Ivanović, Jasna and Pavlović, Vladimir B. and Rakić, Vesna M. and Rančić, Milica P. and Đokić, Veljko and Marinković, Aleksandar D.",
year = "2017",
abstract = "The influence of modification and vacuum/supercritical CO2 (scCO2) drying methods on the surface properties, morphology and thermal stability of cellulose nanocrystals (NC) was presented in this study. Introduction of reactive vinyl groups on NC surface was performed by either direct esterification with oleic acid, linseed or sunflower oil fatty acids; or by amidation of maleic acid/ethylene diamine with methyl ester of fatty acid. Obtained modified NC (m-NC) were characterized using FTIR and Raman spectroscopy; and by determination of acid, iodine and ester values. Structural analysis of m-NC showed varieties of forms, from spongy to nanostructural non-uniform layered morphology with observable agglomeration, which confirmed morphology dependence on modification/processing methods Thermogravimetry-MS spectrometry showed different thermal stability and degradation pathways of NC/m-NC. Incorporation of 1 wt% of reactive m-NC in unsaturated polyester lead to high performance nanocomposites and contributed to increase of stress at break in the range from 76 to 93%.",
publisher = "Elsevier",
journal = "Carbohydrate Polymers",
title = "Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites",
pages = "64-74",
volume = "164",
doi = "10.1016/j.carbpol.2017.01.086",
url = "https://hdl.handle.net/21.15107/rcub_dais_4614"
}
Rusmirović, J., Ivanović, J., Pavlović, V. B., Rakić, V. M., Rančić, M. P., Đokić, V.,& Marinković, A. D.. (2017). Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. in Carbohydrate Polymers
Elsevier., 164, 64-74.
https://doi.org/10.1016/j.carbpol.2017.01.086
https://hdl.handle.net/21.15107/rcub_dais_4614
Rusmirović J, Ivanović J, Pavlović VB, Rakić VM, Rančić MP, Đokić V, Marinković AD. Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. in Carbohydrate Polymers. 2017;164:64-74.
doi:10.1016/j.carbpol.2017.01.086
https://hdl.handle.net/21.15107/rcub_dais_4614 .
Rusmirović, Jelena, Ivanović, Jasna, Pavlović, Vladimir B., Rakić, Vesna M., Rančić, Milica P., Đokić, Veljko, Marinković, Aleksandar D., "Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites" in Carbohydrate Polymers, 164 (2017):64-74,
https://doi.org/10.1016/j.carbpol.2017.01.086 .,
https://hdl.handle.net/21.15107/rcub_dais_4614 .
24
19
23

Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites

Rusmirović, Jelena; Ivanović, Jasna; Pavlović, Vladimir B.; Rakić, Vesna M.; Rančić, Milica P.; Đokić, Veljko; Marinković, Aleksandar D.

(Elsevier, 2017)

TY  - JOUR
AU  - Rusmirović, Jelena
AU  - Ivanović, Jasna
AU  - Pavlović, Vladimir B.
AU  - Rakić, Vesna M.
AU  - Rančić, Milica P.
AU  - Đokić, Veljko
AU  - Marinković, Aleksandar D.
PY  - 2017
UR  - https://dais.sanu.ac.rs/123456789/2380
AB  - The influence of modification and vacuum/supercritical CO2 (scCO2) drying methods on the surface properties, morphology and thermal stability of cellulose nanocrystals (NC) was presented in this study. Introduction of reactive vinyl groups on NC surface was performed by either direct esterification with oleic acid, linseed or sunflower oil fatty acids; or by amidation of maleic acid/ethylene diamine with methyl ester of fatty acid. Obtained modified NC (m-NC) were characterized using FTIR and Raman spectroscopy; and by determination of acid, iodine and ester values. Structural analysis of m-NC showed varieties of forms, from spongy to nanostructural non-uniform layered morphology with observable agglomeration, which confirmed morphology dependence on modification/processing methods Thermogravimetry-MS spectrometry showed different thermal stability and degradation pathways of NC/m-NC. Incorporation of 1 wt% of reactive m-NC in unsaturated polyester lead to high performance nanocomposites and contributed to increase of stress at break in the range from 76 to 93%.
PB  - Elsevier
T2  - Carbohydrate Polymers
T1  - Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites
SP  - 64
EP  - 74
VL  - 164
DO  - 10.1016/j.carbpol.2017.01.086
UR  - https://hdl.handle.net/21.15107/rcub_dais_2380
ER  - 
@article{
author = "Rusmirović, Jelena and Ivanović, Jasna and Pavlović, Vladimir B. and Rakić, Vesna M. and Rančić, Milica P. and Đokić, Veljko and Marinković, Aleksandar D.",
year = "2017",
abstract = "The influence of modification and vacuum/supercritical CO2 (scCO2) drying methods on the surface properties, morphology and thermal stability of cellulose nanocrystals (NC) was presented in this study. Introduction of reactive vinyl groups on NC surface was performed by either direct esterification with oleic acid, linseed or sunflower oil fatty acids; or by amidation of maleic acid/ethylene diamine with methyl ester of fatty acid. Obtained modified NC (m-NC) were characterized using FTIR and Raman spectroscopy; and by determination of acid, iodine and ester values. Structural analysis of m-NC showed varieties of forms, from spongy to nanostructural non-uniform layered morphology with observable agglomeration, which confirmed morphology dependence on modification/processing methods Thermogravimetry-MS spectrometry showed different thermal stability and degradation pathways of NC/m-NC. Incorporation of 1 wt% of reactive m-NC in unsaturated polyester lead to high performance nanocomposites and contributed to increase of stress at break in the range from 76 to 93%.",
publisher = "Elsevier",
journal = "Carbohydrate Polymers",
title = "Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites",
pages = "64-74",
volume = "164",
doi = "10.1016/j.carbpol.2017.01.086",
url = "https://hdl.handle.net/21.15107/rcub_dais_2380"
}
Rusmirović, J., Ivanović, J., Pavlović, V. B., Rakić, V. M., Rančić, M. P., Đokić, V.,& Marinković, A. D.. (2017). Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. in Carbohydrate Polymers
Elsevier., 164, 64-74.
https://doi.org/10.1016/j.carbpol.2017.01.086
https://hdl.handle.net/21.15107/rcub_dais_2380
Rusmirović J, Ivanović J, Pavlović VB, Rakić VM, Rančić MP, Đokić V, Marinković AD. Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. in Carbohydrate Polymers. 2017;164:64-74.
doi:10.1016/j.carbpol.2017.01.086
https://hdl.handle.net/21.15107/rcub_dais_2380 .
Rusmirović, Jelena, Ivanović, Jasna, Pavlović, Vladimir B., Rakić, Vesna M., Rančić, Milica P., Đokić, Veljko, Marinković, Aleksandar D., "Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites" in Carbohydrate Polymers, 164 (2017):64-74,
https://doi.org/10.1016/j.carbpol.2017.01.086 .,
https://hdl.handle.net/21.15107/rcub_dais_2380 .
24
19
23

Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization

Vujančević, Jelena; Đokić, Veljko; Bjelajac, Anđelika; Pavlović, Vera P.; Mitrić, Miodrag; Janaćković, Đorđe; Pavlović, Vladimir B.

(Belgrade : Institute of Technical Sciences of SASA, 2015)

TY  - CONF
AU  - Vujančević, Jelena
AU  - Đokić, Veljko
AU  - Bjelajac, Anđelika
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - https://dais.sanu.ac.rs/123456789/841
AB  - Having in mind that anodic oxidation method can be used for tailoring desired structure and morphology of TiO2, herein the synthesis of self-ordered TiO2 nanotubes via electrochemical anodization of high purity Ti foil is reported. The influence of synthesis parameters such as oxidative voltage, different electrolyte, annealing temperature and annealing atmosphere were explored and correlate with obtained TiO2 nanotube arrays. The results show that applied potential is the main factor that controls the diameter of the nanotubes, while annealing temperature influence on crystal type and morphology is related to different contents of electrolyte. Investigated method gives opportunity to enhanced performance of TiO2 nanotubes, providing many applications in different field.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia
T1  - Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization
SP  - 18
EP  - 18
UR  - https://hdl.handle.net/21.15107/rcub_dais_841
ER  - 
@conference{
author = "Vujančević, Jelena and Đokić, Veljko and Bjelajac, Anđelika and Pavlović, Vera P. and Mitrić, Miodrag and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2015",
abstract = "Having in mind that anodic oxidation method can be used for tailoring desired structure and morphology of TiO2, herein the synthesis of self-ordered TiO2 nanotubes via electrochemical anodization of high purity Ti foil is reported. The influence of synthesis parameters such as oxidative voltage, different electrolyte, annealing temperature and annealing atmosphere were explored and correlate with obtained TiO2 nanotube arrays. The results show that applied potential is the main factor that controls the diameter of the nanotubes, while annealing temperature influence on crystal type and morphology is related to different contents of electrolyte. Investigated method gives opportunity to enhanced performance of TiO2 nanotubes, providing many applications in different field.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia",
title = "Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization",
pages = "18-18",
url = "https://hdl.handle.net/21.15107/rcub_dais_841"
}
Vujančević, J., Đokić, V., Bjelajac, A., Pavlović, V. P., Mitrić, M., Janaćković, Đ.,& Pavlović, V. B.. (2015). Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization. in Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 18-18.
https://hdl.handle.net/21.15107/rcub_dais_841
Vujančević J, Đokić V, Bjelajac A, Pavlović VP, Mitrić M, Janaćković Đ, Pavlović VB. Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization. in Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia. 2015;:18-18.
https://hdl.handle.net/21.15107/rcub_dais_841 .
Vujančević, Jelena, Đokić, Veljko, Bjelajac, Anđelika, Pavlović, Vera P., Mitrić, Miodrag, Janaćković, Đorđe, Pavlović, Vladimir B., "Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization" in Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia (2015):18-18,
https://hdl.handle.net/21.15107/rcub_dais_841 .