Marinković Stanojević, Zorica

Link to this page

Authority KeyName Variants
orcid::0000-0002-1666-5758
  • Marinković Stanojević, Zorica (7)
  • Marinković, Zorica (1)
Projects

Author's Bibliography

Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods

Luković Golić, Danijela; Radojković, Aleksandar; Ćirković, Jovana; Dapčević, Aleksandra; Pajić, Damir; Tasić, Nikola B.; Savić, Slavica M.; Počuča Nešić, Milica; Marković, Smilja; Branković, Goran; Marinković Stanojević, Zorica; Branković, Zorica

(Elsevier, 2016)

TY  - JOUR
AU  - Luković Golić, Danijela
AU  - Radojković, Aleksandar
AU  - Ćirković, Jovana
AU  - Dapčević, Aleksandra
AU  - Pajić, Damir
AU  - Tasić, Nikola B.
AU  - Savić, Slavica M.
AU  - Počuča Nešić, Milica
AU  - Marković, Smilja
AU  - Branković, Goran
AU  - Marinković Stanojević, Zorica
AU  - Branković, Zorica
PY  - 2016
UR  - https://dais.sanu.ac.rs/123456789/2320
AB  - BiFeO3 powders were synthesized by sonochemically assisted hydrothermal and hydro-evaporation methods. The X-ray diffraction confirmed the presence of secondary phases, Bi25FeO39 and Bi2Fe4O9, in as prepared BiFeO3 powders. Optimization of sintering conditions indicated that temperature of 800 °C and time of 2 h after pressing at 9 t/cm2 provided ceramics samples with the highest density (up to 96% of theoretical density) and the lowest content of secondary phases. Ferroelectric and magnetic characterization was performed on two selected ceramics samples with the highest densities. Ceramics obtained from the powder synthesized by the hydrothermal method showed greater lattice distortion along [1 1 1] axis and smaller grains, which resulted in larger values of electric polarization at room temperature. It also exhibited less Fe(3d)–O(2p) orbital overlapping due to a larger FeOFe bond angle, causing lower antiferromagnetic ordering and weak ferromagnetic behavior at low temperatures.
PB  - Elsevier
T2  - Journal of the European Ceramic Society
T1  - Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods
SP  - 1623
EP  - 1631
VL  - 36
IS  - 7
DO  - 10.1016/j.jeurceramsoc.2016.01.031
UR  - https://hdl.handle.net/21.15107/rcub_dais_2320
ER  - 
@article{
author = "Luković Golić, Danijela and Radojković, Aleksandar and Ćirković, Jovana and Dapčević, Aleksandra and Pajić, Damir and Tasić, Nikola B. and Savić, Slavica M. and Počuča Nešić, Milica and Marković, Smilja and Branković, Goran and Marinković Stanojević, Zorica and Branković, Zorica",
year = "2016",
abstract = "BiFeO3 powders were synthesized by sonochemically assisted hydrothermal and hydro-evaporation methods. The X-ray diffraction confirmed the presence of secondary phases, Bi25FeO39 and Bi2Fe4O9, in as prepared BiFeO3 powders. Optimization of sintering conditions indicated that temperature of 800 °C and time of 2 h after pressing at 9 t/cm2 provided ceramics samples with the highest density (up to 96% of theoretical density) and the lowest content of secondary phases. Ferroelectric and magnetic characterization was performed on two selected ceramics samples with the highest densities. Ceramics obtained from the powder synthesized by the hydrothermal method showed greater lattice distortion along [1 1 1] axis and smaller grains, which resulted in larger values of electric polarization at room temperature. It also exhibited less Fe(3d)–O(2p) orbital overlapping due to a larger FeOFe bond angle, causing lower antiferromagnetic ordering and weak ferromagnetic behavior at low temperatures.",
publisher = "Elsevier",
journal = "Journal of the European Ceramic Society",
title = "Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods",
pages = "1623-1631",
volume = "36",
number = "7",
doi = "10.1016/j.jeurceramsoc.2016.01.031",
url = "https://hdl.handle.net/21.15107/rcub_dais_2320"
}
Luković Golić, D., Radojković, A., Ćirković, J., Dapčević, A., Pajić, D., Tasić, N. B., Savić, S. M., Počuča Nešić, M., Marković, S., Branković, G., Marinković Stanojević, Z.,& Branković, Z.. (2016). Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods. in Journal of the European Ceramic Society
Elsevier., 36(7), 1623-1631.
https://doi.org/10.1016/j.jeurceramsoc.2016.01.031
https://hdl.handle.net/21.15107/rcub_dais_2320
Luković Golić D, Radojković A, Ćirković J, Dapčević A, Pajić D, Tasić NB, Savić SM, Počuča Nešić M, Marković S, Branković G, Marinković Stanojević Z, Branković Z. Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods. in Journal of the European Ceramic Society. 2016;36(7):1623-1631.
doi:10.1016/j.jeurceramsoc.2016.01.031
https://hdl.handle.net/21.15107/rcub_dais_2320 .
Luković Golić, Danijela, Radojković, Aleksandar, Ćirković, Jovana, Dapčević, Aleksandra, Pajić, Damir, Tasić, Nikola B., Savić, Slavica M., Počuča Nešić, Milica, Marković, Smilja, Branković, Goran, Marinković Stanojević, Zorica, Branković, Zorica, "Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods" in Journal of the European Ceramic Society, 36, no. 7 (2016):1623-1631,
https://doi.org/10.1016/j.jeurceramsoc.2016.01.031 .,
https://hdl.handle.net/21.15107/rcub_dais_2320 .
19
20
20

Nanostructured Fe2O3/TiO2 thick films prepared by screen printing

Aleksić, Obrad S.; Đurić, Zorka Ž.; Nikolić, Maria Vesna; Tasić, Nikola B.; Vuković, Marina; Marinković Stanojević, Zorica; Nikolić, Nenad; Nikolić, Pantelija M.

(Novi Sad : University of Novi Sad, Faculty of Technology, 2013)

TY  - JOUR
AU  - Aleksić, Obrad S.
AU  - Đurić, Zorka Ž.
AU  - Nikolić, Maria Vesna
AU  - Tasić, Nikola B.
AU  - Vuković, Marina
AU  - Marinković Stanojević, Zorica
AU  - Nikolić, Nenad
AU  - Nikolić, Pantelija M.
PY  - 2013
UR  - https://dais.sanu.ac.rs/123456789/368
AB  - Nanostructured single layered (pure TiO2 , pure α-Fe2O3 and mixed Fe2O3 /TiO2 with two different oxide ratios, 2 : 3 and 3 : 2) and double layered (TiO2 layer over a Fe2O3 layer) thick films have been fabricated by screen printing technology on a glass substrate. The pastes used for film preparation were obtained by adding an organic vehicle to the oxide powders together with a small percentage of binding glass frit. Samples were dried up to 100 °C and sintered at 650 °C/60 minutes. Structural, morphological and optical studies have been carried out using XRD, SEM analyses and UV/Vis spectroscopy. The prepared pure and mixed Fe2O3 /TiO2 thick films had a homogenous nanostructure without secondary phases. Indirect band gaps were determined from the measured transmission spectra and the obtained values are in the range of literature data. [Projekat Ministarstva nauke Republike Srbije, br. III45007]
PB  - Novi Sad : University of Novi Sad, Faculty of Technology
T2  - Processing and Application of Ceramics
T1  - Nanostructured Fe2O3/TiO2 thick films prepared by screen printing
SP  - 129
EP  - 134
VL  - 7
IS  - 3
DO  - 10.2298/PAC1303129A
UR  - https://hdl.handle.net/21.15107/rcub_dais_368
ER  - 
@article{
author = "Aleksić, Obrad S. and Đurić, Zorka Ž. and Nikolić, Maria Vesna and Tasić, Nikola B. and Vuković, Marina and Marinković Stanojević, Zorica and Nikolić, Nenad and Nikolić, Pantelija M.",
year = "2013",
abstract = "Nanostructured single layered (pure TiO2 , pure α-Fe2O3 and mixed Fe2O3 /TiO2 with two different oxide ratios, 2 : 3 and 3 : 2) and double layered (TiO2 layer over a Fe2O3 layer) thick films have been fabricated by screen printing technology on a glass substrate. The pastes used for film preparation were obtained by adding an organic vehicle to the oxide powders together with a small percentage of binding glass frit. Samples were dried up to 100 °C and sintered at 650 °C/60 minutes. Structural, morphological and optical studies have been carried out using XRD, SEM analyses and UV/Vis spectroscopy. The prepared pure and mixed Fe2O3 /TiO2 thick films had a homogenous nanostructure without secondary phases. Indirect band gaps were determined from the measured transmission spectra and the obtained values are in the range of literature data. [Projekat Ministarstva nauke Republike Srbije, br. III45007]",
publisher = "Novi Sad : University of Novi Sad, Faculty of Technology",
journal = "Processing and Application of Ceramics",
title = "Nanostructured Fe2O3/TiO2 thick films prepared by screen printing",
pages = "129-134",
volume = "7",
number = "3",
doi = "10.2298/PAC1303129A",
url = "https://hdl.handle.net/21.15107/rcub_dais_368"
}
Aleksić, O. S., Đurić, Z. Ž., Nikolić, M. V., Tasić, N. B., Vuković, M., Marinković Stanojević, Z., Nikolić, N.,& Nikolić, P. M.. (2013). Nanostructured Fe2O3/TiO2 thick films prepared by screen printing. in Processing and Application of Ceramics
Novi Sad : University of Novi Sad, Faculty of Technology., 7(3), 129-134.
https://doi.org/10.2298/PAC1303129A
https://hdl.handle.net/21.15107/rcub_dais_368
Aleksić OS, Đurić ZŽ, Nikolić MV, Tasić NB, Vuković M, Marinković Stanojević Z, Nikolić N, Nikolić PM. Nanostructured Fe2O3/TiO2 thick films prepared by screen printing. in Processing and Application of Ceramics. 2013;7(3):129-134.
doi:10.2298/PAC1303129A
https://hdl.handle.net/21.15107/rcub_dais_368 .
Aleksić, Obrad S., Đurić, Zorka Ž., Nikolić, Maria Vesna, Tasić, Nikola B., Vuković, Marina, Marinković Stanojević, Zorica, Nikolić, Nenad, Nikolić, Pantelija M., "Nanostructured Fe2O3/TiO2 thick films prepared by screen printing" in Processing and Application of Ceramics, 7, no. 3 (2013):129-134,
https://doi.org/10.2298/PAC1303129A .,
https://hdl.handle.net/21.15107/rcub_dais_368 .

Mechanochemical synthesis of bismuth ferrite

Marinković Stanojević, Zorica; Mančić, Lidija; Srećković, T.; Stojanović, B.

(Technical Faculty - Copper Institute, Bor, 2013)

TY  - JOUR
AU  - Marinković Stanojević, Zorica
AU  - Mančić, Lidija
AU  - Srećković, T.
AU  - Stojanović, B.
PY  - 2013
UR  - https://dais.sanu.ac.rs/123456789/363
AB  - A powder mixture of Bi2O3 and Fe2O3 was mechanically treated in a planetary ball mill in an air from 30 to 720 minutes. It was shown that the mechanochemical formation of BiFeO3 (BFO) phase was initiated after 60 min and its amount increased gradually with increasing milling time. A detailed XRPD structural analysis is realized by Rietveld’s structure refinement method. The resulting lattice parameters, relative phase abundances, crystallite sizes and crystal lattice microstrains were determined as a function of milling time. Microstructural analysis showed a little difference in morphology of obtained powders. The primary particles, irregular in shape and smaller than 400 nm are observed clearly, although they have assembled together to form agglomerates with varying size and morphology. Dense BFO ceramics were prepared by conventional solid-state reaction at the temperature of 810ºC for 1h followed immediately by quenching process. [Projekat Ministarstva nauke Republike Srbije, br. III45007: Zero- to Three-Dimensional Nanostructures for Application in Electronics and Renewable Energy Sources: Synthesis, Characterization and Processing
PB  - Technical Faculty - Copper Institute, Bor
T2  - Journal of Mining and Metallurgy, Section B: Metallurgy
T1  - Mechanochemical synthesis of bismuth ferrite
SP  - 27
EP  - 31
VL  - 49
IS  - 1
DO  - 10.2298/JMMB120430039M
UR  - https://hdl.handle.net/21.15107/rcub_dais_363
ER  - 
@article{
author = "Marinković Stanojević, Zorica and Mančić, Lidija and Srećković, T. and Stojanović, B.",
year = "2013",
abstract = "A powder mixture of Bi2O3 and Fe2O3 was mechanically treated in a planetary ball mill in an air from 30 to 720 minutes. It was shown that the mechanochemical formation of BiFeO3 (BFO) phase was initiated after 60 min and its amount increased gradually with increasing milling time. A detailed XRPD structural analysis is realized by Rietveld’s structure refinement method. The resulting lattice parameters, relative phase abundances, crystallite sizes and crystal lattice microstrains were determined as a function of milling time. Microstructural analysis showed a little difference in morphology of obtained powders. The primary particles, irregular in shape and smaller than 400 nm are observed clearly, although they have assembled together to form agglomerates with varying size and morphology. Dense BFO ceramics were prepared by conventional solid-state reaction at the temperature of 810ºC for 1h followed immediately by quenching process. [Projekat Ministarstva nauke Republike Srbije, br. III45007: Zero- to Three-Dimensional Nanostructures for Application in Electronics and Renewable Energy Sources: Synthesis, Characterization and Processing",
publisher = "Technical Faculty - Copper Institute, Bor",
journal = "Journal of Mining and Metallurgy, Section B: Metallurgy",
title = "Mechanochemical synthesis of bismuth ferrite",
pages = "27-31",
volume = "49",
number = "1",
doi = "10.2298/JMMB120430039M",
url = "https://hdl.handle.net/21.15107/rcub_dais_363"
}
Marinković Stanojević, Z., Mančić, L., Srećković, T.,& Stojanović, B.. (2013). Mechanochemical synthesis of bismuth ferrite. in Journal of Mining and Metallurgy, Section B: Metallurgy
Technical Faculty - Copper Institute, Bor., 49(1), 27-31.
https://doi.org/10.2298/JMMB120430039M
https://hdl.handle.net/21.15107/rcub_dais_363
Marinković Stanojević Z, Mančić L, Srećković T, Stojanović B. Mechanochemical synthesis of bismuth ferrite. in Journal of Mining and Metallurgy, Section B: Metallurgy. 2013;49(1):27-31.
doi:10.2298/JMMB120430039M
https://hdl.handle.net/21.15107/rcub_dais_363 .
Marinković Stanojević, Zorica, Mančić, Lidija, Srećković, T., Stojanović, B., "Mechanochemical synthesis of bismuth ferrite" in Journal of Mining and Metallurgy, Section B: Metallurgy, 49, no. 1 (2013):27-31,
https://doi.org/10.2298/JMMB120430039M .,
https://hdl.handle.net/21.15107/rcub_dais_363 .
5
4
4

Mechanochemical Synthesis of Nanocrystalline Multiferroics Based on Bismuth Manganite

Marinković Stanojević, Zorica; Mančić, Lidija; Jagodič, Marko; Jagličić, Zvonko; Rečnik, Aleksander; Branković, Zorica; Branković, Goran

(Belgrade : Serbian Ceramic Society, 2012)

TY  - CONF
AU  - Marinković Stanojević, Zorica
AU  - Mančić, Lidija
AU  - Jagodič, Marko
AU  - Jagličić, Zvonko
AU  - Rečnik, Aleksander
AU  - Branković, Zorica
AU  - Branković, Goran
PY  - 2012
UR  - https://dais.sanu.ac.rs/123456789/515
AB  - Multiferroic materials simultaneously possess two or more ferroic orders, and enable a coupling interaction between them. Multiferroic bismuth manganite is known as a material that exhibits both ferromagnetic and ferroelectric properties making it interesting for various technological applications. Unfortunately, preparation of BiMnO3 is not possible by conventional solid state reaction and BiMnO3 has been synthesized from the mixture of oxides only at high pressures (>40 kbar). The aim of this work was to synthesize BiMnO3 (BMO) without additional heating or application of high pressures. Nanocrystalline single-phased BMnO3 was prepared for the first time by mechanochemical synthesis directly from the highly activated constituent oxides, Bi2O3 and Mn2O3, in a planetary ball mill. The obtained materials were characterized by X-ray diffraction, SEM with EDS analysis, HRTEM and magnetization measurements. All the samples were found to be tetragonal perovskite with P4mm crystallographic group. The broad maxima reflections of BMO samples can be ascribed to an amorphous/disordered phase. HRTEM micrographs give clear evidence of core-shell structure with amorphous shell around the nanocrystalline BMO particles. The magnetic hysteresis behavior is similar to that of a soft ferromagnet. The magnetic properties of the obtained BMO powders were found to change as a function of milling time in a manner consistent with the variation in the nanocomposite microstructure.
PB  - Belgrade : Serbian Ceramic Society
C3  - The First Serbian Ceramic Society Conference "Advanced Ceramics and Application" May 10-11, 2012: Program and the Book of Abstracts
T1  - Mechanochemical Synthesis of Nanocrystalline Multiferroics Based on Bismuth Manganite
SP  - 15
EP  - 15
UR  - https://hdl.handle.net/21.15107/rcub_dais_515
ER  - 
@conference{
author = "Marinković Stanojević, Zorica and Mančić, Lidija and Jagodič, Marko and Jagličić, Zvonko and Rečnik, Aleksander and Branković, Zorica and Branković, Goran",
year = "2012",
abstract = "Multiferroic materials simultaneously possess two or more ferroic orders, and enable a coupling interaction between them. Multiferroic bismuth manganite is known as a material that exhibits both ferromagnetic and ferroelectric properties making it interesting for various technological applications. Unfortunately, preparation of BiMnO3 is not possible by conventional solid state reaction and BiMnO3 has been synthesized from the mixture of oxides only at high pressures (>40 kbar). The aim of this work was to synthesize BiMnO3 (BMO) without additional heating or application of high pressures. Nanocrystalline single-phased BMnO3 was prepared for the first time by mechanochemical synthesis directly from the highly activated constituent oxides, Bi2O3 and Mn2O3, in a planetary ball mill. The obtained materials were characterized by X-ray diffraction, SEM with EDS analysis, HRTEM and magnetization measurements. All the samples were found to be tetragonal perovskite with P4mm crystallographic group. The broad maxima reflections of BMO samples can be ascribed to an amorphous/disordered phase. HRTEM micrographs give clear evidence of core-shell structure with amorphous shell around the nanocrystalline BMO particles. The magnetic hysteresis behavior is similar to that of a soft ferromagnet. The magnetic properties of the obtained BMO powders were found to change as a function of milling time in a manner consistent with the variation in the nanocomposite microstructure.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "The First Serbian Ceramic Society Conference "Advanced Ceramics and Application" May 10-11, 2012: Program and the Book of Abstracts",
title = "Mechanochemical Synthesis of Nanocrystalline Multiferroics Based on Bismuth Manganite",
pages = "15-15",
url = "https://hdl.handle.net/21.15107/rcub_dais_515"
}
Marinković Stanojević, Z., Mančić, L., Jagodič, M., Jagličić, Z., Rečnik, A., Branković, Z.,& Branković, G.. (2012). Mechanochemical Synthesis of Nanocrystalline Multiferroics Based on Bismuth Manganite. in The First Serbian Ceramic Society Conference "Advanced Ceramics and Application" May 10-11, 2012: Program and the Book of Abstracts
Belgrade : Serbian Ceramic Society., 15-15.
https://hdl.handle.net/21.15107/rcub_dais_515
Marinković Stanojević Z, Mančić L, Jagodič M, Jagličić Z, Rečnik A, Branković Z, Branković G. Mechanochemical Synthesis of Nanocrystalline Multiferroics Based on Bismuth Manganite. in The First Serbian Ceramic Society Conference "Advanced Ceramics and Application" May 10-11, 2012: Program and the Book of Abstracts. 2012;:15-15.
https://hdl.handle.net/21.15107/rcub_dais_515 .
Marinković Stanojević, Zorica, Mančić, Lidija, Jagodič, Marko, Jagličić, Zvonko, Rečnik, Aleksander, Branković, Zorica, Branković, Goran, "Mechanochemical Synthesis of Nanocrystalline Multiferroics Based on Bismuth Manganite" in The First Serbian Ceramic Society Conference "Advanced Ceramics and Application" May 10-11, 2012: Program and the Book of Abstracts (2012):15-15,
https://hdl.handle.net/21.15107/rcub_dais_515 .

Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis

Marinković Stanojević, Zorica; Branković, Zorica; Jagličić, Zvonko; Jagodič, Marko; Mančić, Lidija; Bernik, Slavko; Rečnik, A.; Branković, Goran

(Springer Netherlands, 2011)

TY  - JOUR
AU  - Marinković Stanojević, Zorica
AU  - Branković, Zorica
AU  - Jagličić, Zvonko
AU  - Jagodič, Marko
AU  - Mančić, Lidija
AU  - Bernik, Slavko
AU  - Rečnik, A.
AU  - Branković, Goran
PY  - 2011
UR  - https://dais.sanu.ac.rs/123456789/712
AB  - We have studied the formation of BiMnO3 (BMO) nanocrystalline perovskite powder produced by high-energy milling of the constituent oxides. The crystal structure and the amount of crystalline and amorphous phases in the powder as a function of the milling time were determined with XRPD using Rietveld refinement. BMO perovskite formed directly from highly activated nano-sized constituent oxides after 240 min of milling and subsequently grew during prolonged milling. The morphology, structure, and chemical composition of the powder were investigated by SEM and TEM. A clear ferromagnetic transition was observed at T C ~66 K for a sample milled for 240 min and increased with milling time. The magnetic hysteresis behavior is similar to that of a soft ferromagnet. The magnetic properties of the obtained BMO powders were found to change as a function of milling time in a manner consistent with variations in the nanocomposite microstructure.
PB  - Springer Netherlands
T2  - Journal of Nanoparticle Research
T1  - Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis
SP  - 3431
EP  - 3439
VL  - 13
IS  - 8
DO  - 10.1007/s11051-011-0265-7
UR  - https://hdl.handle.net/21.15107/rcub_dais_712
ER  - 
@article{
author = "Marinković Stanojević, Zorica and Branković, Zorica and Jagličić, Zvonko and Jagodič, Marko and Mančić, Lidija and Bernik, Slavko and Rečnik, A. and Branković, Goran",
year = "2011",
abstract = "We have studied the formation of BiMnO3 (BMO) nanocrystalline perovskite powder produced by high-energy milling of the constituent oxides. The crystal structure and the amount of crystalline and amorphous phases in the powder as a function of the milling time were determined with XRPD using Rietveld refinement. BMO perovskite formed directly from highly activated nano-sized constituent oxides after 240 min of milling and subsequently grew during prolonged milling. The morphology, structure, and chemical composition of the powder were investigated by SEM and TEM. A clear ferromagnetic transition was observed at T C ~66 K for a sample milled for 240 min and increased with milling time. The magnetic hysteresis behavior is similar to that of a soft ferromagnet. The magnetic properties of the obtained BMO powders were found to change as a function of milling time in a manner consistent with variations in the nanocomposite microstructure.",
publisher = "Springer Netherlands",
journal = "Journal of Nanoparticle Research",
title = "Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis",
pages = "3431-3439",
volume = "13",
number = "8",
doi = "10.1007/s11051-011-0265-7",
url = "https://hdl.handle.net/21.15107/rcub_dais_712"
}
Marinković Stanojević, Z., Branković, Z., Jagličić, Z., Jagodič, M., Mančić, L., Bernik, S., Rečnik, A.,& Branković, G.. (2011). Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis. in Journal of Nanoparticle Research
Springer Netherlands., 13(8), 3431-3439.
https://doi.org/10.1007/s11051-011-0265-7
https://hdl.handle.net/21.15107/rcub_dais_712
Marinković Stanojević Z, Branković Z, Jagličić Z, Jagodič M, Mančić L, Bernik S, Rečnik A, Branković G. Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis. in Journal of Nanoparticle Research. 2011;13(8):3431-3439.
doi:10.1007/s11051-011-0265-7
https://hdl.handle.net/21.15107/rcub_dais_712 .
Marinković Stanojević, Zorica, Branković, Zorica, Jagličić, Zvonko, Jagodič, Marko, Mančić, Lidija, Bernik, Slavko, Rečnik, A., Branković, Goran, "Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis" in Journal of Nanoparticle Research, 13, no. 8 (2011):3431-3439,
https://doi.org/10.1007/s11051-011-0265-7 .,
https://hdl.handle.net/21.15107/rcub_dais_712 .
15
17

Mechanochemical synthesis of multiferroic yttrium manganite

Marinković Stanojević, Zorica; Počuča Nešić, Milica; Branković, Zorica; Mančić, Lidija; Bernik, Slavko; Rečnik, A.; Branković, Goran

(Belgrade : Materials Research Society of Serbia, 2011)

TY  - CONF
AU  - Marinković Stanojević, Zorica
AU  - Počuča Nešić, Milica
AU  - Branković, Zorica
AU  - Mančić, Lidija
AU  - Bernik, Slavko
AU  - Rečnik, A.
AU  - Branković, Goran
PY  - 2011
UR  - https://dais.sanu.ac.rs/123456789/671
AB  - Multiferroic yttrium manganite (YMnO3) is known as a material that exhibits both ferromagnetic and ferroelectric properties making it interesting for various technological applications. In this work single-phased YMnO3 was prepared for the first time by mechanochemical synthesis in a planetary ball mill. The YMnO3 can be formed directly from the highly activated constituent oxides, Y2O3 and Mn2O3, after 60 min of milling time and subsequently grows during prolonged milling. The cumulative energy introduced into the system during milling for 60 min was 86 kJ/g. X-ray analysis indicates that the as-prepared samples crystallize majority with hexagonal (P63cm) and minorly with orthorhombic (Pnma) YMnO3 structure. The morphology, structure and chemical composition of the powder were investigated by SEM with EDS and TEM. The magnetic properties of the obtained YMnO3 powders were found to change as a function of milling time in a manner consistent with the variation in the nanocomposite microstructure.
PB  - Belgrade : Materials Research Society of Serbia
C3  - VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts
T1  - Mechanochemical synthesis of multiferroic yttrium manganite
SP  - 83
EP  - 83
UR  - https://hdl.handle.net/21.15107/rcub_dais_671
ER  - 
@conference{
author = "Marinković Stanojević, Zorica and Počuča Nešić, Milica and Branković, Zorica and Mančić, Lidija and Bernik, Slavko and Rečnik, A. and Branković, Goran",
year = "2011",
abstract = "Multiferroic yttrium manganite (YMnO3) is known as a material that exhibits both ferromagnetic and ferroelectric properties making it interesting for various technological applications. In this work single-phased YMnO3 was prepared for the first time by mechanochemical synthesis in a planetary ball mill. The YMnO3 can be formed directly from the highly activated constituent oxides, Y2O3 and Mn2O3, after 60 min of milling time and subsequently grows during prolonged milling. The cumulative energy introduced into the system during milling for 60 min was 86 kJ/g. X-ray analysis indicates that the as-prepared samples crystallize majority with hexagonal (P63cm) and minorly with orthorhombic (Pnma) YMnO3 structure. The morphology, structure and chemical composition of the powder were investigated by SEM with EDS and TEM. The magnetic properties of the obtained YMnO3 powders were found to change as a function of milling time in a manner consistent with the variation in the nanocomposite microstructure.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts",
title = "Mechanochemical synthesis of multiferroic yttrium manganite",
pages = "83-83",
url = "https://hdl.handle.net/21.15107/rcub_dais_671"
}
Marinković Stanojević, Z., Počuča Nešić, M., Branković, Z., Mančić, L., Bernik, S., Rečnik, A.,& Branković, G.. (2011). Mechanochemical synthesis of multiferroic yttrium manganite. in VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts
Belgrade : Materials Research Society of Serbia., 83-83.
https://hdl.handle.net/21.15107/rcub_dais_671
Marinković Stanojević Z, Počuča Nešić M, Branković Z, Mančić L, Bernik S, Rečnik A, Branković G. Mechanochemical synthesis of multiferroic yttrium manganite. in VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts. 2011;:83-83.
https://hdl.handle.net/21.15107/rcub_dais_671 .
Marinković Stanojević, Zorica, Počuča Nešić, Milica, Branković, Zorica, Mančić, Lidija, Bernik, Slavko, Rečnik, A., Branković, Goran, "Mechanochemical synthesis of multiferroic yttrium manganite" in VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts (2011):83-83,
https://hdl.handle.net/21.15107/rcub_dais_671 .

Synthesis of BaTiO3 from a mechanically activated BaCO 3-TiO2 system

Pavlović, Vera P.; Stojanović, B. D.; Pavlović, Vladimir B.; Marinković Stanojević, Zorica; Živković, Ljiljana; Ristic, Momčilo M.

(Belgrade : International Institute for the Science of Sintering, 2008)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Stojanović, B. D.
AU  - Pavlović, Vladimir B.
AU  - Marinković Stanojević, Zorica
AU  - Živković, Ljiljana
AU  - Ristic, Momčilo M.
PY  - 2008
UR  - https://dais.sanu.ac.rs/123456789/3561
AB  - In this article the solid state reaction of BaTiO3 formation from a mechanically activated BaCO3-TiO2 system has been investigated. An equimolar mixture of BaCO3 and TiO2 powders was activated in a planetary ball mill in a continual regime for 0, 30 and 90 min, pressed and thermally treated up to 1200°C. The efect of the milling and firing regime on the phase formation was investigated by the X-ray diffraction (XRD) method and differential thermal analysis (DTA). Deconvolution of the experimental DTA curve corresponding to the BaTiO3 synthesis process has been performed. The influence of the activation time on the change of characteristic temperature for each elementary step in the complete solid-state reaction of BaTiO3 formation, was analyzed. These results were correlated with the ones obtained by SEM characterization and by XRD analysis.
PB  - Belgrade : International Institute for the Science of Sintering
T2  - Science of Sintering
T1  - Synthesis of BaTiO3 from a mechanically activated BaCO 3-TiO2 system
SP  - 21
EP  - 26
VL  - 40
IS  - 1
DO  - 10.2298/SOS0801021P
UR  - https://hdl.handle.net/21.15107/rcub_dais_3561
ER  - 
@article{
author = "Pavlović, Vera P. and Stojanović, B. D. and Pavlović, Vladimir B. and Marinković Stanojević, Zorica and Živković, Ljiljana and Ristic, Momčilo M.",
year = "2008",
abstract = "In this article the solid state reaction of BaTiO3 formation from a mechanically activated BaCO3-TiO2 system has been investigated. An equimolar mixture of BaCO3 and TiO2 powders was activated in a planetary ball mill in a continual regime for 0, 30 and 90 min, pressed and thermally treated up to 1200°C. The efect of the milling and firing regime on the phase formation was investigated by the X-ray diffraction (XRD) method and differential thermal analysis (DTA). Deconvolution of the experimental DTA curve corresponding to the BaTiO3 synthesis process has been performed. The influence of the activation time on the change of characteristic temperature for each elementary step in the complete solid-state reaction of BaTiO3 formation, was analyzed. These results were correlated with the ones obtained by SEM characterization and by XRD analysis.",
publisher = "Belgrade : International Institute for the Science of Sintering",
journal = "Science of Sintering",
title = "Synthesis of BaTiO3 from a mechanically activated BaCO 3-TiO2 system",
pages = "21-26",
volume = "40",
number = "1",
doi = "10.2298/SOS0801021P",
url = "https://hdl.handle.net/21.15107/rcub_dais_3561"
}
Pavlović, V. P., Stojanović, B. D., Pavlović, V. B., Marinković Stanojević, Z., Živković, L.,& Ristic, M. M.. (2008). Synthesis of BaTiO3 from a mechanically activated BaCO 3-TiO2 system. in Science of Sintering
Belgrade : International Institute for the Science of Sintering., 40(1), 21-26.
https://doi.org/10.2298/SOS0801021P
https://hdl.handle.net/21.15107/rcub_dais_3561
Pavlović VP, Stojanović BD, Pavlović VB, Marinković Stanojević Z, Živković L, Ristic MM. Synthesis of BaTiO3 from a mechanically activated BaCO 3-TiO2 system. in Science of Sintering. 2008;40(1):21-26.
doi:10.2298/SOS0801021P
https://hdl.handle.net/21.15107/rcub_dais_3561 .
Pavlović, Vera P., Stojanović, B. D., Pavlović, Vladimir B., Marinković Stanojević, Zorica, Živković, Ljiljana, Ristic, Momčilo M., "Synthesis of BaTiO3 from a mechanically activated BaCO 3-TiO2 system" in Science of Sintering, 40, no. 1 (2008):21-26,
https://doi.org/10.2298/SOS0801021P .,
https://hdl.handle.net/21.15107/rcub_dais_3561 .
17
19

The synthesis: Structure relationship in the ZnO-Cr2O3 system

Mančić, Lidija; Marinković, Zorica; Vulić, Predrag; Milošević, Olivera

(Belgrade : International Institute for the Science of Sintering, 2004)

TY  - JOUR
AU  - Mančić, Lidija
AU  - Marinković, Zorica
AU  - Vulić, Predrag
AU  - Milošević, Olivera
PY  - 2004
UR  - https://dais.sanu.ac.rs/123456789/229
AB  - In this work the development of the spinel phase in the ZnO-Cr2O3 system was discussed from the viewpoint of the synthesis-structure relationship. The nanostructure evolution in particles obtained either via solution-based (spray pyrolysis) or solid-state (mechanical activation) synthesis procedures were investigated by XRD analysis. A detailed structural analysis of the spinel phase lattice parameters, average primary crystallite sizes and micro strains were performed in accordance with a procedure based on the Koalariet-Xfit program. Due to the importance of spinel-phase cat ion distribution for chemical and physical properties, a study of the site occupation factors, i.e. changes in the stoichiometric, of ZnCr2O4 spinals was undertaken. The calculation based on atomistic methods for the description of both perfect and defect spinel ZnCr2O4 crystal lattices has been applied and the presence of individual structural defects was determined.
PB  - Belgrade : International Institute for the Science of Sintering
T2  - Science of Sintering
T1  - The synthesis: Structure relationship in the ZnO-Cr2O3 system
SP  - 189
EP  - 196
VL  - 36
IS  - 3
DO  - 10.2298/SOS0403189M
UR  - https://hdl.handle.net/21.15107/rcub_dais_229
ER  - 
@article{
author = "Mančić, Lidija and Marinković, Zorica and Vulić, Predrag and Milošević, Olivera",
year = "2004",
abstract = "In this work the development of the spinel phase in the ZnO-Cr2O3 system was discussed from the viewpoint of the synthesis-structure relationship. The nanostructure evolution in particles obtained either via solution-based (spray pyrolysis) or solid-state (mechanical activation) synthesis procedures were investigated by XRD analysis. A detailed structural analysis of the spinel phase lattice parameters, average primary crystallite sizes and micro strains were performed in accordance with a procedure based on the Koalariet-Xfit program. Due to the importance of spinel-phase cat ion distribution for chemical and physical properties, a study of the site occupation factors, i.e. changes in the stoichiometric, of ZnCr2O4 spinals was undertaken. The calculation based on atomistic methods for the description of both perfect and defect spinel ZnCr2O4 crystal lattices has been applied and the presence of individual structural defects was determined.",
publisher = "Belgrade : International Institute for the Science of Sintering",
journal = "Science of Sintering",
title = "The synthesis: Structure relationship in the ZnO-Cr2O3 system",
pages = "189-196",
volume = "36",
number = "3",
doi = "10.2298/SOS0403189M",
url = "https://hdl.handle.net/21.15107/rcub_dais_229"
}
Mančić, L., Marinković, Z., Vulić, P.,& Milošević, O.. (2004). The synthesis: Structure relationship in the ZnO-Cr2O3 system. in Science of Sintering
Belgrade : International Institute for the Science of Sintering., 36(3), 189-196.
https://doi.org/10.2298/SOS0403189M
https://hdl.handle.net/21.15107/rcub_dais_229
Mančić L, Marinković Z, Vulić P, Milošević O. The synthesis: Structure relationship in the ZnO-Cr2O3 system. in Science of Sintering. 2004;36(3):189-196.
doi:10.2298/SOS0403189M
https://hdl.handle.net/21.15107/rcub_dais_229 .
Mančić, Lidija, Marinković, Zorica, Vulić, Predrag, Milošević, Olivera, "The synthesis: Structure relationship in the ZnO-Cr2O3 system" in Science of Sintering, 36, no. 3 (2004):189-196,
https://doi.org/10.2298/SOS0403189M .,
https://hdl.handle.net/21.15107/rcub_dais_229 .
5
4
5