Mitić, Vojislav V.

Link to this page

Authority KeyName Variants
87d41209-d37c-47cc-9ead-a9a6e5fc3c78
  • Mitić, Vojislav V. (39)
  • Mitić, Vojislav (2)
Projects

Author's Bibliography

Graph theory applied to microelectronics intergranular relations

Mitić, Vojislav V.; Lazović, Goran; Ranđelović, Branislav; Paunović, Vesna; Radović, Ivana; Stajčić, Aleksandar; Vlahović, Branislav

(Taylor & Francis Group, 2021)

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Ranđelović, Branislav
AU  - Paunović, Vesna
AU  - Radović, Ivana
AU  - Stajčić, Aleksandar
AU  - Vlahović, Branislav
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12090
AB  - The focus of this study is on the control of layers between grains by applying graph theory. We performed modification of BaTiO3 nanoparticles with Y2O3. The results of capacitance change on submicron level are the part of the measured values on the bulk samples. The original idea is to develop the new approach to use graph theory for networking of electronic parameters between the neighboring grains in order to compare the values measured on the sample, and to present them through the edges in graph between corresponding vertices. Capacitance change with DC bias was measured on bulk samples, and the modified nanoparticles showed stability up to 90 V. After using graph theory with the different number of neighboring grains and on different voltages, it has been shown that capacitance change can be successfully calculated on the layers between grains. Original calculations presented as 1D cases were performed, confirming graph application as a tool with which measured bulk results can be downsized to an appropriate intergranular level, opening the new perspectives in the area of miniaturization and micropackaging.
PB  - Taylor & Francis Group
T2  - Ferroelectrics
T1  - Graph theory applied to microelectronics intergranular relations
SP  - 145
EP  - 152
VL  - 570
IS  - 1
DO  - 10.1080/00150193.2020.1839265
UR  - https://hdl.handle.net/21.15107/rcub_dais_12090
ER  - 
@article{
author = "Mitić, Vojislav V. and Lazović, Goran and Ranđelović, Branislav and Paunović, Vesna and Radović, Ivana and Stajčić, Aleksandar and Vlahović, Branislav",
year = "2021",
abstract = "The focus of this study is on the control of layers between grains by applying graph theory. We performed modification of BaTiO3 nanoparticles with Y2O3. The results of capacitance change on submicron level are the part of the measured values on the bulk samples. The original idea is to develop the new approach to use graph theory for networking of electronic parameters between the neighboring grains in order to compare the values measured on the sample, and to present them through the edges in graph between corresponding vertices. Capacitance change with DC bias was measured on bulk samples, and the modified nanoparticles showed stability up to 90 V. After using graph theory with the different number of neighboring grains and on different voltages, it has been shown that capacitance change can be successfully calculated on the layers between grains. Original calculations presented as 1D cases were performed, confirming graph application as a tool with which measured bulk results can be downsized to an appropriate intergranular level, opening the new perspectives in the area of miniaturization and micropackaging.",
publisher = "Taylor & Francis Group",
journal = "Ferroelectrics",
title = "Graph theory applied to microelectronics intergranular relations",
pages = "145-152",
volume = "570",
number = "1",
doi = "10.1080/00150193.2020.1839265",
url = "https://hdl.handle.net/21.15107/rcub_dais_12090"
}
Mitić, V. V., Lazović, G., Ranđelović, B., Paunović, V., Radović, I., Stajčić, A.,& Vlahović, B.. (2021). Graph theory applied to microelectronics intergranular relations. in Ferroelectrics
Taylor & Francis Group., 570(1), 145-152.
https://doi.org/10.1080/00150193.2020.1839265
https://hdl.handle.net/21.15107/rcub_dais_12090
Mitić VV, Lazović G, Ranđelović B, Paunović V, Radović I, Stajčić A, Vlahović B. Graph theory applied to microelectronics intergranular relations. in Ferroelectrics. 2021;570(1):145-152.
doi:10.1080/00150193.2020.1839265
https://hdl.handle.net/21.15107/rcub_dais_12090 .
Mitić, Vojislav V., Lazović, Goran, Ranđelović, Branislav, Paunović, Vesna, Radović, Ivana, Stajčić, Aleksandar, Vlahović, Branislav, "Graph theory applied to microelectronics intergranular relations" in Ferroelectrics, 570, no. 1 (2021):145-152,
https://doi.org/10.1080/00150193.2020.1839265 .,
https://hdl.handle.net/21.15107/rcub_dais_12090 .
3
3
4

The 3D graph approach for breakdown voltage calculation in BaTiO3ceramics

Mitić, Vojislav V.; Ranđelović, Branislav; Ilić, Ivana; Ribar, Srđan; Chun, An-Lu; Stajčić, Aleksandar; Vlahović, Branislav

(World Scientific Publishing Co, 2021)

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Ranđelović, Branislav
AU  - Ilić, Ivana
AU  - Ribar, Srđan
AU  - Chun, An-Lu
AU  - Stajčić, Aleksandar
AU  - Vlahović, Branislav
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4809
UR  - https://dais.sanu.ac.rs/123456789/11949
AB  - After pioneering attempts for the introduction of graph theory in the field of ceramics and microstructures, where 1D and 2D graphs were used, in this paper we applied 3D graphs for the breakdown voltage calculation in BaTiO3sample with some predefined constraints. We have described the relations between grains in the sample and established a mathematical approach for the calculation of breakdown voltage using experimental results. As a result, we introduced mapping between the property of sample and grain structure, then between the grain structure and mathematical graph, using various crystal structures. The main idea was to apply 3D graph theory for the distribution of electronic parameters between the neighboring grains. With this study, we successfully confirmed the possibilities for applications of graphs as a tool for the determination of properties even at the intergranular level.
PB  - World Scientific Publishing Co
T2  - International Journal of Modern Physics B
T1  - The 3D graph approach for breakdown voltage calculation in BaTiO3ceramics
SP  - 2150103
VL  - 35
IS  - 7
DO  - 10.1142/S0217979221501034
UR  - https://hdl.handle.net/21.15107/rcub_dais_11949
ER  - 
@article{
author = "Mitić, Vojislav V. and Ranđelović, Branislav and Ilić, Ivana and Ribar, Srđan and Chun, An-Lu and Stajčić, Aleksandar and Vlahović, Branislav",
year = "2021",
abstract = "After pioneering attempts for the introduction of graph theory in the field of ceramics and microstructures, where 1D and 2D graphs were used, in this paper we applied 3D graphs for the breakdown voltage calculation in BaTiO3sample with some predefined constraints. We have described the relations between grains in the sample and established a mathematical approach for the calculation of breakdown voltage using experimental results. As a result, we introduced mapping between the property of sample and grain structure, then between the grain structure and mathematical graph, using various crystal structures. The main idea was to apply 3D graph theory for the distribution of electronic parameters between the neighboring grains. With this study, we successfully confirmed the possibilities for applications of graphs as a tool for the determination of properties even at the intergranular level.",
publisher = "World Scientific Publishing Co",
journal = "International Journal of Modern Physics B",
title = "The 3D graph approach for breakdown voltage calculation in BaTiO3ceramics",
pages = "2150103",
volume = "35",
number = "7",
doi = "10.1142/S0217979221501034",
url = "https://hdl.handle.net/21.15107/rcub_dais_11949"
}
Mitić, V. V., Ranđelović, B., Ilić, I., Ribar, S., Chun, A., Stajčić, A.,& Vlahović, B.. (2021). The 3D graph approach for breakdown voltage calculation in BaTiO3ceramics. in International Journal of Modern Physics B
World Scientific Publishing Co., 35(7), 2150103.
https://doi.org/10.1142/S0217979221501034
https://hdl.handle.net/21.15107/rcub_dais_11949
Mitić VV, Ranđelović B, Ilić I, Ribar S, Chun A, Stajčić A, Vlahović B. The 3D graph approach for breakdown voltage calculation in BaTiO3ceramics. in International Journal of Modern Physics B. 2021;35(7):2150103.
doi:10.1142/S0217979221501034
https://hdl.handle.net/21.15107/rcub_dais_11949 .
Mitić, Vojislav V., Ranđelović, Branislav, Ilić, Ivana, Ribar, Srđan, Chun, An-Lu, Stajčić, Aleksandar, Vlahović, Branislav, "The 3D graph approach for breakdown voltage calculation in BaTiO3ceramics" in International Journal of Modern Physics B, 35, no. 7 (2021):2150103,
https://doi.org/10.1142/S0217979221501034 .,
https://hdl.handle.net/21.15107/rcub_dais_11949 .
1
1
1

Reconstruction of fiber reinforcement in epoxy-based composite

Stajčić, Aleksandar; Mitić, Vojislav V.; Serpa, Cristina; Veljković, Filip; Ranđelović, Branislav; Radović, Ivana

(Belgrade : ETRAN, 2021)

TY  - CONF
AU  - Stajčić, Aleksandar
AU  - Mitić, Vojislav V.
AU  - Serpa, Cristina
AU  - Veljković, Filip
AU  - Ranđelović, Branislav
AU  - Radović, Ivana
PY  - 2021
UR  - https://www.etran.rs/2021/wp-content/uploads/2021/08/PROGRAM_ETRAN_2021_final_b5_za_web.pdf
UR  - https://dais.sanu.ac.rs/123456789/11920
AB  - Polymer matrix composites (PMCs) are very attractive materials due to a possibility to achieve versatile properties by combining with ceramic or metal reinforcement in different shapes and sizes. As a result, PMCs have found application in nearly every field, from household appliances to aerospace industry. Modern microelectronic devices contain conductive polymers with fillers that enhance their electrical properties. In addition, PMCs are being used as insulators and adhesives, contributing to the long life of electronic devices. Epoxy resins are the most commonly used insulators and adhesives. In order to improve their fracture toughness, glass fibers can be used as an efficient reinforcement. However, with the purpose of designing a composite with good mechanical properties and durability, deep knowledge of microstructure is required. In addition, microstructural analysis can be used to connect shape and size of pores or reinforcement with various physical properties. Fractal nature analysis is a valuable mathematical tool that can be employed for different shapes and forms rendering. In this manner, successful design and prediction of composite’s properties could be obtained. In this research, field emission scanning electron microscopy (FESEM) images were used for fractal analysis of glass fibers, with the aim of reconstructing the shape.
PB  - Belgrade : ETRAN
C3  - Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina
T1  - Reconstruction of fiber reinforcement in epoxy-based composite
SP  - 31
EP  - 31
UR  - https://hdl.handle.net/21.15107/rcub_dais_11920
ER  - 
@conference{
author = "Stajčić, Aleksandar and Mitić, Vojislav V. and Serpa, Cristina and Veljković, Filip and Ranđelović, Branislav and Radović, Ivana",
year = "2021",
abstract = "Polymer matrix composites (PMCs) are very attractive materials due to a possibility to achieve versatile properties by combining with ceramic or metal reinforcement in different shapes and sizes. As a result, PMCs have found application in nearly every field, from household appliances to aerospace industry. Modern microelectronic devices contain conductive polymers with fillers that enhance their electrical properties. In addition, PMCs are being used as insulators and adhesives, contributing to the long life of electronic devices. Epoxy resins are the most commonly used insulators and adhesives. In order to improve their fracture toughness, glass fibers can be used as an efficient reinforcement. However, with the purpose of designing a composite with good mechanical properties and durability, deep knowledge of microstructure is required. In addition, microstructural analysis can be used to connect shape and size of pores or reinforcement with various physical properties. Fractal nature analysis is a valuable mathematical tool that can be employed for different shapes and forms rendering. In this manner, successful design and prediction of composite’s properties could be obtained. In this research, field emission scanning electron microscopy (FESEM) images were used for fractal analysis of glass fibers, with the aim of reconstructing the shape.",
publisher = "Belgrade : ETRAN",
journal = "Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina",
title = "Reconstruction of fiber reinforcement in epoxy-based composite",
pages = "31-31",
url = "https://hdl.handle.net/21.15107/rcub_dais_11920"
}
Stajčić, A., Mitić, V. V., Serpa, C., Veljković, F., Ranđelović, B.,& Radović, I.. (2021). Reconstruction of fiber reinforcement in epoxy-based composite. in Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina
Belgrade : ETRAN., 31-31.
https://hdl.handle.net/21.15107/rcub_dais_11920
Stajčić A, Mitić VV, Serpa C, Veljković F, Ranđelović B, Radović I. Reconstruction of fiber reinforcement in epoxy-based composite. in Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina. 2021;:31-31.
https://hdl.handle.net/21.15107/rcub_dais_11920 .
Stajčić, Aleksandar, Mitić, Vojislav V., Serpa, Cristina, Veljković, Filip, Ranđelović, Branislav, Radović, Ivana, "Reconstruction of fiber reinforcement in epoxy-based composite" in Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina (2021):31-31,
https://hdl.handle.net/21.15107/rcub_dais_11920 .

Biomolecules and Brownian motion

Mitić, Vojislav V.; Marković, Bojana; Aleksić, Sanja; Milošević, Dušan; Ranđelović, Branislav; Ilić, Ivana; Manojlović, Jelena; Vlahović, Branislav

(Belgrade : ETRAN, 2021)

TY  - CONF
AU  - Mitić, Vojislav V.
AU  - Marković, Bojana
AU  - Aleksić, Sanja
AU  - Milošević, Dušan
AU  - Ranđelović, Branislav
AU  - Ilić, Ivana
AU  - Manojlović, Jelena
AU  - Vlahović, Branislav
PY  - 2021
UR  - https://www.etran.rs/2021/wp-content/uploads/2021/08/PROGRAM_ETRAN_2021_final_b5_za_web.pdf
UR  - https://dais.sanu.ac.rs/123456789/11919
AB  - Structures and different life functions of microorganisms, like motion, are based on molecular biology processes, which comprise molecular and submolecular particles. It is very important to determine relation between molecular and microorganisms levels. The aim of our research is the analysis of Brownian motion as a general phenomenon and the consequence of structures hierarchy from molecular to microorganisms level. If we approach this idea from the aspect of biomimetic correlations at the level of the alive and nonalive matter system particles, the condensed matter particles could be considered as a part of micro, nano and molecular microorganisms structures. In this research we used the experimental results of bacterial motion influenced by different energy impulses. The important goal of this research paper is to obtain significant data regarding Brownian motion in the frame of fractal nature similarities, as an integrative property of living and nonliving systems particles processes. This opens new frontiers for submicroelectronics relations within the integrated supermicro biophysical systems. This is a potential new trend in nowadays advanced research, where we integrate the knowledges of complex relations between the electrons or other particles and their clusters as joint structures in alive and condensed matter, what could be a possible direction for new microelectronics complex biodevices and integrations.
PB  - Belgrade : ETRAN
C3  - Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina
T1  - Biomolecules and Brownian motion
SP  - 31
EP  - 31
UR  - https://hdl.handle.net/21.15107/rcub_dais_11919
ER  - 
@conference{
author = "Mitić, Vojislav V. and Marković, Bojana and Aleksić, Sanja and Milošević, Dušan and Ranđelović, Branislav and Ilić, Ivana and Manojlović, Jelena and Vlahović, Branislav",
year = "2021",
abstract = "Structures and different life functions of microorganisms, like motion, are based on molecular biology processes, which comprise molecular and submolecular particles. It is very important to determine relation between molecular and microorganisms levels. The aim of our research is the analysis of Brownian motion as a general phenomenon and the consequence of structures hierarchy from molecular to microorganisms level. If we approach this idea from the aspect of biomimetic correlations at the level of the alive and nonalive matter system particles, the condensed matter particles could be considered as a part of micro, nano and molecular microorganisms structures. In this research we used the experimental results of bacterial motion influenced by different energy impulses. The important goal of this research paper is to obtain significant data regarding Brownian motion in the frame of fractal nature similarities, as an integrative property of living and nonliving systems particles processes. This opens new frontiers for submicroelectronics relations within the integrated supermicro biophysical systems. This is a potential new trend in nowadays advanced research, where we integrate the knowledges of complex relations between the electrons or other particles and their clusters as joint structures in alive and condensed matter, what could be a possible direction for new microelectronics complex biodevices and integrations.",
publisher = "Belgrade : ETRAN",
journal = "Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina",
title = "Biomolecules and Brownian motion",
pages = "31-31",
url = "https://hdl.handle.net/21.15107/rcub_dais_11919"
}
Mitić, V. V., Marković, B., Aleksić, S., Milošević, D., Ranđelović, B., Ilić, I., Manojlović, J.,& Vlahović, B.. (2021). Biomolecules and Brownian motion. in Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina
Belgrade : ETRAN., 31-31.
https://hdl.handle.net/21.15107/rcub_dais_11919
Mitić VV, Marković B, Aleksić S, Milošević D, Ranđelović B, Ilić I, Manojlović J, Vlahović B. Biomolecules and Brownian motion. in Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina. 2021;:31-31.
https://hdl.handle.net/21.15107/rcub_dais_11919 .
Mitić, Vojislav V., Marković, Bojana, Aleksić, Sanja, Milošević, Dušan, Ranđelović, Branislav, Ilić, Ivana, Manojlović, Jelena, Vlahović, Branislav, "Biomolecules and Brownian motion" in Zbornik apstrakta i program 65. konferencije ETRAN i 8. konferencije IcETRAN, Etno selo Stanišići, Republika Srpska, 8-10. septembra 2021. godine = Proceedings of Abstracts and Program 8th Conference IcETRAN in conjunction with the 65th ETRAN Conference, Etno village Stanišići, Republic of Srpska, Bosnia and Herzegovina (2021):31-31,
https://hdl.handle.net/21.15107/rcub_dais_11919 .

Approximation and Error Prediction in Electrochemical Parameters Calculation Using Neural Networks

Mitić, Vojislav V.; Ranđelović, Branislav; Ribar, Srđan; Milošević, Dušan; Vlahović, Branislav; Fecht, Hans-Jörg; Mohr, Marcus

(Belgrade : Serbian Ceramic Society, 2021)

TY  - CONF
AU  - Mitić, Vojislav V.
AU  - Ranđelović, Branislav
AU  - Ribar, Srđan
AU  - Milošević, Dušan
AU  - Vlahović, Branislav
AU  - Fecht, Hans-Jörg
AU  - Mohr, Marcus
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11900
AB  - Various interesting results have been achieved in calculation of electrochemical parameters in nanomaterials, using neural networks. There appear some error, during those calculations, and it varies depending on number of neurons in layers. In this research we deal with errors, calculated for neural networks with n=1,2…10, neurons in first or second layer. We applied mean square approximation method, in order to get explicite formula for predicton of error,
for other cases.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
T1  - Approximation and Error Prediction in Electrochemical Parameters Calculation Using Neural Networks
SP  - 61
EP  - 61
UR  - https://hdl.handle.net/21.15107/rcub_dais_11900
ER  - 
@conference{
author = "Mitić, Vojislav V. and Ranđelović, Branislav and Ribar, Srđan and Milošević, Dušan and Vlahović, Branislav and Fecht, Hans-Jörg and Mohr, Marcus",
year = "2021",
abstract = "Various interesting results have been achieved in calculation of electrochemical parameters in nanomaterials, using neural networks. There appear some error, during those calculations, and it varies depending on number of neurons in layers. In this research we deal with errors, calculated for neural networks with n=1,2…10, neurons in first or second layer. We applied mean square approximation method, in order to get explicite formula for predicton of error,
for other cases.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021",
title = "Approximation and Error Prediction in Electrochemical Parameters Calculation Using Neural Networks",
pages = "61-61",
url = "https://hdl.handle.net/21.15107/rcub_dais_11900"
}
Mitić, V. V., Ranđelović, B., Ribar, S., Milošević, D., Vlahović, B., Fecht, H.,& Mohr, M.. (2021). Approximation and Error Prediction in Electrochemical Parameters Calculation Using Neural Networks. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
Belgrade : Serbian Ceramic Society., 61-61.
https://hdl.handle.net/21.15107/rcub_dais_11900
Mitić VV, Ranđelović B, Ribar S, Milošević D, Vlahović B, Fecht H, Mohr M. Approximation and Error Prediction in Electrochemical Parameters Calculation Using Neural Networks. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021. 2021;:61-61.
https://hdl.handle.net/21.15107/rcub_dais_11900 .
Mitić, Vojislav V., Ranđelović, Branislav, Ribar, Srđan, Milošević, Dušan, Vlahović, Branislav, Fecht, Hans-Jörg, Mohr, Marcus, "Approximation and Error Prediction in Electrochemical Parameters Calculation Using Neural Networks" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021 (2021):61-61,
https://hdl.handle.net/21.15107/rcub_dais_11900 .

Fractal Nature of Advanced Ni-Based Superalloys Solidified on Board the International Space Station

Mitić, Vojislav; Serpa, Cristina; Ilić, Ivana; Mohr, Marcus; Fecht, Hans-Jörg

(Basel : MDPI AG, 2021)

TY  - JOUR
AU  - Mitić, Vojislav
AU  - Serpa, Cristina
AU  - Ilić, Ivana
AU  - Mohr, Marcus
AU  - Fecht, Hans-Jörg
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11647
AB  - Materials science is highly significant in space program investigation, energy production and others. Therefore, designing, improving and predicting advanced material properties is a crucial necessity. The high temperature creep and corrosion resistance of Ni-based superalloys makes them important materials for turbine blades in aircraft engines and land-based power plants. The investment casting process of turbine blades is costly and time consuming, which makes process simulations a necessity. These simulations require fundamental models for the microstructure formation. In this paper, we present advanced analytical techniques in describing the microstructures obtained experimentally and analyzed on different sample’s cross-sectional images. The samples have been processed on board the International Space Station using the MSL-EML device based on electromagnetic levitation principles. We applied several aspects of fractal analysis and obtained important results regarding fractals and Hausdorff dimensions related to the surface and structural characteristics of CMSX-10 samples. Using scanning electron microscopy (SEM), Zeiss LEO 1550, we analyzed the microstructure of samples solidified in space and successfully performed the fractal reconstruction of the sample’s morphology. We extended the fractal analysis on the microscopic images based on samples solidified on earth and established new frontiers on the advanced structures prediction.
PB  - Basel : MDPI AG
T2  - Remote Sensing
T1  - Fractal Nature of Advanced Ni-Based Superalloys Solidified on Board the International Space Station
SP  - 1724
VL  - 13
IS  - 9
DO  - 10.3390/rs13091724
UR  - https://hdl.handle.net/21.15107/rcub_dais_11647
ER  - 
@article{
author = "Mitić, Vojislav and Serpa, Cristina and Ilić, Ivana and Mohr, Marcus and Fecht, Hans-Jörg",
year = "2021",
abstract = "Materials science is highly significant in space program investigation, energy production and others. Therefore, designing, improving and predicting advanced material properties is a crucial necessity. The high temperature creep and corrosion resistance of Ni-based superalloys makes them important materials for turbine blades in aircraft engines and land-based power plants. The investment casting process of turbine blades is costly and time consuming, which makes process simulations a necessity. These simulations require fundamental models for the microstructure formation. In this paper, we present advanced analytical techniques in describing the microstructures obtained experimentally and analyzed on different sample’s cross-sectional images. The samples have been processed on board the International Space Station using the MSL-EML device based on electromagnetic levitation principles. We applied several aspects of fractal analysis and obtained important results regarding fractals and Hausdorff dimensions related to the surface and structural characteristics of CMSX-10 samples. Using scanning electron microscopy (SEM), Zeiss LEO 1550, we analyzed the microstructure of samples solidified in space and successfully performed the fractal reconstruction of the sample’s morphology. We extended the fractal analysis on the microscopic images based on samples solidified on earth and established new frontiers on the advanced structures prediction.",
publisher = "Basel : MDPI AG",
journal = "Remote Sensing",
title = "Fractal Nature of Advanced Ni-Based Superalloys Solidified on Board the International Space Station",
pages = "1724",
volume = "13",
number = "9",
doi = "10.3390/rs13091724",
url = "https://hdl.handle.net/21.15107/rcub_dais_11647"
}
Mitić, V., Serpa, C., Ilić, I., Mohr, M.,& Fecht, H.. (2021). Fractal Nature of Advanced Ni-Based Superalloys Solidified on Board the International Space Station. in Remote Sensing
Basel : MDPI AG., 13(9), 1724.
https://doi.org/10.3390/rs13091724
https://hdl.handle.net/21.15107/rcub_dais_11647
Mitić V, Serpa C, Ilić I, Mohr M, Fecht H. Fractal Nature of Advanced Ni-Based Superalloys Solidified on Board the International Space Station. in Remote Sensing. 2021;13(9):1724.
doi:10.3390/rs13091724
https://hdl.handle.net/21.15107/rcub_dais_11647 .
Mitić, Vojislav, Serpa, Cristina, Ilić, Ivana, Mohr, Marcus, Fecht, Hans-Jörg, "Fractal Nature of Advanced Ni-Based Superalloys Solidified on Board the International Space Station" in Remote Sensing, 13, no. 9 (2021):1724,
https://doi.org/10.3390/rs13091724 .,
https://hdl.handle.net/21.15107/rcub_dais_11647 .

The ceramics materials density defined by artificial neural networks

Ribar, Srđan; Mitić, Vojislav V.; Ranđelović, Branislav; Milošević, Dušan; Paunović, Vesna; Fecht, Hans-Jörg; Vlahović, Branislav

(Belgrade : Serbian Ceramic Society, 2021)

TY  - CONF
AU  - Ribar, Srđan
AU  - Mitić, Vojislav V.
AU  - Ranđelović, Branislav
AU  - Milošević, Dušan
AU  - Paunović, Vesna
AU  - Fecht, Hans-Jörg
AU  - Vlahović, Branislav
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11909
AB  - Predicting the ceramic materials properties and designing the desired microstructures characteristics are very important objectives in ceramic samples consolidating process. The goal of our research is to calculate the density within consolidated BaTiO3-ceramic samples for different consolidation parameters, like sintering temperature, using obtained experimental data from the material’s surface, by applying back propagation neural network (BP). This method, as a very powerful tool, provides the possibility to calculate the exact values of desired microelectronic parameter at the level of the grains’ coating layers. The artificial neural networks, which have biomimetic similarities with biological neural networks, propagate the input signal forward, unlike the output signal, designated as error, which is propagated backwards spreading throughout the whole network, from output to input neuron layers. Between these two neuron layers, there are usually one or more hidden layers, where the grains of the sintered material are represented by network neurons. Adjustable coefficients, called weights, are forward propagated, like input signals, but they modify the calculated output error, so the neural network training procedure is necessary for reducing the error. Different consolidated samples density values, measured on the bulk, substituted the errors, which are calculated as contribution of all network elements, thus enabling the density calculation of all constituents of ceramic structure presented by neural network. In our future research we plan to increase the number of neurons and hidden layers in order to improve this method to become even more accurate and precise.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
T1  - The ceramics materials density defined by artificial neural networks
SP  - 42
EP  - 42
UR  - https://hdl.handle.net/21.15107/rcub_dais_11909
ER  - 
@conference{
author = "Ribar, Srđan and Mitić, Vojislav V. and Ranđelović, Branislav and Milošević, Dušan and Paunović, Vesna and Fecht, Hans-Jörg and Vlahović, Branislav",
year = "2021",
abstract = "Predicting the ceramic materials properties and designing the desired microstructures characteristics are very important objectives in ceramic samples consolidating process. The goal of our research is to calculate the density within consolidated BaTiO3-ceramic samples for different consolidation parameters, like sintering temperature, using obtained experimental data from the material’s surface, by applying back propagation neural network (BP). This method, as a very powerful tool, provides the possibility to calculate the exact values of desired microelectronic parameter at the level of the grains’ coating layers. The artificial neural networks, which have biomimetic similarities with biological neural networks, propagate the input signal forward, unlike the output signal, designated as error, which is propagated backwards spreading throughout the whole network, from output to input neuron layers. Between these two neuron layers, there are usually one or more hidden layers, where the grains of the sintered material are represented by network neurons. Adjustable coefficients, called weights, are forward propagated, like input signals, but they modify the calculated output error, so the neural network training procedure is necessary for reducing the error. Different consolidated samples density values, measured on the bulk, substituted the errors, which are calculated as contribution of all network elements, thus enabling the density calculation of all constituents of ceramic structure presented by neural network. In our future research we plan to increase the number of neurons and hidden layers in order to improve this method to become even more accurate and precise.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021",
title = "The ceramics materials density defined by artificial neural networks",
pages = "42-42",
url = "https://hdl.handle.net/21.15107/rcub_dais_11909"
}
Ribar, S., Mitić, V. V., Ranđelović, B., Milošević, D., Paunović, V., Fecht, H.,& Vlahović, B.. (2021). The ceramics materials density defined by artificial neural networks. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
Belgrade : Serbian Ceramic Society., 42-42.
https://hdl.handle.net/21.15107/rcub_dais_11909
Ribar S, Mitić VV, Ranđelović B, Milošević D, Paunović V, Fecht H, Vlahović B. The ceramics materials density defined by artificial neural networks. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021. 2021;:42-42.
https://hdl.handle.net/21.15107/rcub_dais_11909 .
Ribar, Srđan, Mitić, Vojislav V., Ranđelović, Branislav, Milošević, Dušan, Paunović, Vesna, Fecht, Hans-Jörg, Vlahović, Branislav, "The ceramics materials density defined by artificial neural networks" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021 (2021):42-42,
https://hdl.handle.net/21.15107/rcub_dais_11909 .

Fractals, Graphs and Neural Networks: The Holly Trinity of Nanostructures - An Overview and Comparison of Methods

Mitić, Vojislav V.; Ranđelović, Branislav; Ribar, Srđan; Milošević, Dušan; Soković, Marina; Marković, Bojana; Fecht, Hans-Jörg; Vlahović, Branislav

(Belgrade : Serbian Ceramic Society, 2021)

TY  - CONF
AU  - Mitić, Vojislav V.
AU  - Ranđelović, Branislav
AU  - Ribar, Srđan
AU  - Milošević, Dušan
AU  - Soković, Marina
AU  - Marković, Bojana
AU  - Fecht, Hans-Jörg
AU  - Vlahović, Branislav
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11908
AB  - There are a lot of recently published research papers regarding representing nanostructures and biomimetic materials, using simple but powerful mathematical methods. In most of them, fractal theory, graph theory and neural networks are used. Having in mind variety of those methods, but in the same time complementarity and compatibility, they became very useful tool, and we named it “Holly Trinity” of mathematical approach in nanostructures. In this research we give an overview on interesting results in modelling nanostructures and their electrochemical and magnetic parameters, using those very actual and “easy to use” methods: fractal theory, graph theory and neural networks. We also compare them, in order to conclude about areas of their most useful applications.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
T1  - Fractals, Graphs and Neural Networks: The Holly Trinity of Nanostructures - An Overview and Comparison of Methods
SP  - 43
EP  - 43
UR  - https://hdl.handle.net/21.15107/rcub_dais_11908
ER  - 
@conference{
author = "Mitić, Vojislav V. and Ranđelović, Branislav and Ribar, Srđan and Milošević, Dušan and Soković, Marina and Marković, Bojana and Fecht, Hans-Jörg and Vlahović, Branislav",
year = "2021",
abstract = "There are a lot of recently published research papers regarding representing nanostructures and biomimetic materials, using simple but powerful mathematical methods. In most of them, fractal theory, graph theory and neural networks are used. Having in mind variety of those methods, but in the same time complementarity and compatibility, they became very useful tool, and we named it “Holly Trinity” of mathematical approach in nanostructures. In this research we give an overview on interesting results in modelling nanostructures and their electrochemical and magnetic parameters, using those very actual and “easy to use” methods: fractal theory, graph theory and neural networks. We also compare them, in order to conclude about areas of their most useful applications.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021",
title = "Fractals, Graphs and Neural Networks: The Holly Trinity of Nanostructures - An Overview and Comparison of Methods",
pages = "43-43",
url = "https://hdl.handle.net/21.15107/rcub_dais_11908"
}
Mitić, V. V., Ranđelović, B., Ribar, S., Milošević, D., Soković, M., Marković, B., Fecht, H.,& Vlahović, B.. (2021). Fractals, Graphs and Neural Networks: The Holly Trinity of Nanostructures - An Overview and Comparison of Methods. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
Belgrade : Serbian Ceramic Society., 43-43.
https://hdl.handle.net/21.15107/rcub_dais_11908
Mitić VV, Ranđelović B, Ribar S, Milošević D, Soković M, Marković B, Fecht H, Vlahović B. Fractals, Graphs and Neural Networks: The Holly Trinity of Nanostructures - An Overview and Comparison of Methods. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021. 2021;:43-43.
https://hdl.handle.net/21.15107/rcub_dais_11908 .
Mitić, Vojislav V., Ranđelović, Branislav, Ribar, Srđan, Milošević, Dušan, Soković, Marina, Marković, Bojana, Fecht, Hans-Jörg, Vlahović, Branislav, "Fractals, Graphs and Neural Networks: The Holly Trinity of Nanostructures - An Overview and Comparison of Methods" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021 (2021):43-43,
https://hdl.handle.net/21.15107/rcub_dais_11908 .

Fractal reconstruction of fiber-reinforced polymer composites

Radović, Ivana; Mitić, Vojislav V.; Stajčić, Aleksandar; Serpa, Cristina; Ribar, Srđan; Ranđelović, Branislav; Vlahović, Branislav

(Belgrade : Serbian Ceramic Society, 2021)

TY  - CONF
AU  - Radović, Ivana
AU  - Mitić, Vojislav V.
AU  - Stajčić, Aleksandar
AU  - Serpa, Cristina
AU  - Ribar, Srđan
AU  - Ranđelović, Branislav
AU  - Vlahović, Branislav
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11906
AB  - Polymers offer the possibility of different reinforcement incorporation due to a broad range of chemical structures. Along with this feature, their light weight and processing ease made them a class of materials that have been applied in construction parts, drug delivery agents or electronic devices. Epoxy-based composites have used as insulators in microelectronic devices due to its chemical resistance, good adhesion properties and endurance. As epoxies have low fracture resistance, they are often reinforced with different kinds of fibers. With thorough knowledge of the structure, physical properties can be predicted and included in the processing of future composites, especially that electronic materials minituarization brought micro- and nanoscale level properties at spotlight. Fractal nature analysis is a mathematical method that has proved to be efficient in grain interface properties applied on perovskite ceramic materials. In our study, fiber shape reconstruction and determination of Hausdorff dimension have been achieved with the application of fractal regression model employed in software Fractal Real Finder opening a new path for the prediction of reinforcement shape and size, all with the aim of processing composite materials with desired properties
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
T1  - Fractal reconstruction of fiber-reinforced polymer composites
SP  - 49
EP  - 49
UR  - https://hdl.handle.net/21.15107/rcub_dais_11906
ER  - 
@conference{
author = "Radović, Ivana and Mitić, Vojislav V. and Stajčić, Aleksandar and Serpa, Cristina and Ribar, Srđan and Ranđelović, Branislav and Vlahović, Branislav",
year = "2021",
abstract = "Polymers offer the possibility of different reinforcement incorporation due to a broad range of chemical structures. Along with this feature, their light weight and processing ease made them a class of materials that have been applied in construction parts, drug delivery agents or electronic devices. Epoxy-based composites have used as insulators in microelectronic devices due to its chemical resistance, good adhesion properties and endurance. As epoxies have low fracture resistance, they are often reinforced with different kinds of fibers. With thorough knowledge of the structure, physical properties can be predicted and included in the processing of future composites, especially that electronic materials minituarization brought micro- and nanoscale level properties at spotlight. Fractal nature analysis is a mathematical method that has proved to be efficient in grain interface properties applied on perovskite ceramic materials. In our study, fiber shape reconstruction and determination of Hausdorff dimension have been achieved with the application of fractal regression model employed in software Fractal Real Finder opening a new path for the prediction of reinforcement shape and size, all with the aim of processing composite materials with desired properties",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021",
title = "Fractal reconstruction of fiber-reinforced polymer composites",
pages = "49-49",
url = "https://hdl.handle.net/21.15107/rcub_dais_11906"
}
Radović, I., Mitić, V. V., Stajčić, A., Serpa, C., Ribar, S., Ranđelović, B.,& Vlahović, B.. (2021). Fractal reconstruction of fiber-reinforced polymer composites. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
Belgrade : Serbian Ceramic Society., 49-49.
https://hdl.handle.net/21.15107/rcub_dais_11906
Radović I, Mitić VV, Stajčić A, Serpa C, Ribar S, Ranđelović B, Vlahović B. Fractal reconstruction of fiber-reinforced polymer composites. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021. 2021;:49-49.
https://hdl.handle.net/21.15107/rcub_dais_11906 .
Radović, Ivana, Mitić, Vojislav V., Stajčić, Aleksandar, Serpa, Cristina, Ribar, Srđan, Ranđelović, Branislav, Vlahović, Branislav, "Fractal reconstruction of fiber-reinforced polymer composites" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021 (2021):49-49,
https://hdl.handle.net/21.15107/rcub_dais_11906 .

Magnetic materials, Curie-Weiss law and fractal correction

Mitić, Vojislav V.; Serpa, Cristina; Stajčić, Aleksandar; Khamoushi, Kouros; Paunović, Vesna; Aleksić, Sanja; Vlahović, Branislav

(Belgrade : Serbian Ceramic Society, 2021)

TY  - CONF
AU  - Mitić, Vojislav V.
AU  - Serpa, Cristina
AU  - Stajčić, Aleksandar
AU  - Khamoushi, Kouros
AU  - Paunović, Vesna
AU  - Aleksić, Sanja
AU  - Vlahović, Branislav
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11907
AB  - Neodymium zinc titanate (NZT) is a very attractive perovskite due to its magnetic and dielectric properties. Considering the microstructure influence NZT stability and performance, it is of great importance to establish an approach for the analysis and prediction of grain boundary phenomena. The fractal nature analysis has already proved to be valuable for the reconstruction and prediction of ceramics intergranular electrical properties. However, no researches were performed on the fractal analysis applied on magnetic materials. This method could give an insight in magnetic properties change from the bulk to the grain interface level. In this study, fractal analysis was applied for the Curie-Weiss law correction, introducing fractal correction into magnetic materials for the first time. NZT powders used in this research for fractal analysis were obtained after sintering at different temperatures in the range from 1450°C to 1675°C.Connection between the microstructure fractal nature and the resulting magnetic permeability has been established, enabling the application on different magnetic materials in the future. This creates a foundation for new researches that will lead to further miniaturization of satellite and mobile devices.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
T1  - Magnetic materials, Curie-Weiss law and fractal correction
SP  - 46
EP  - 46
UR  - https://hdl.handle.net/21.15107/rcub_dais_11907
ER  - 
@conference{
author = "Mitić, Vojislav V. and Serpa, Cristina and Stajčić, Aleksandar and Khamoushi, Kouros and Paunović, Vesna and Aleksić, Sanja and Vlahović, Branislav",
year = "2021",
abstract = "Neodymium zinc titanate (NZT) is a very attractive perovskite due to its magnetic and dielectric properties. Considering the microstructure influence NZT stability and performance, it is of great importance to establish an approach for the analysis and prediction of grain boundary phenomena. The fractal nature analysis has already proved to be valuable for the reconstruction and prediction of ceramics intergranular electrical properties. However, no researches were performed on the fractal analysis applied on magnetic materials. This method could give an insight in magnetic properties change from the bulk to the grain interface level. In this study, fractal analysis was applied for the Curie-Weiss law correction, introducing fractal correction into magnetic materials for the first time. NZT powders used in this research for fractal analysis were obtained after sintering at different temperatures in the range from 1450°C to 1675°C.Connection between the microstructure fractal nature and the resulting magnetic permeability has been established, enabling the application on different magnetic materials in the future. This creates a foundation for new researches that will lead to further miniaturization of satellite and mobile devices.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021",
title = "Magnetic materials, Curie-Weiss law and fractal correction",
pages = "46-46",
url = "https://hdl.handle.net/21.15107/rcub_dais_11907"
}
Mitić, V. V., Serpa, C., Stajčić, A., Khamoushi, K., Paunović, V., Aleksić, S.,& Vlahović, B.. (2021). Magnetic materials, Curie-Weiss law and fractal correction. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
Belgrade : Serbian Ceramic Society., 46-46.
https://hdl.handle.net/21.15107/rcub_dais_11907
Mitić VV, Serpa C, Stajčić A, Khamoushi K, Paunović V, Aleksić S, Vlahović B. Magnetic materials, Curie-Weiss law and fractal correction. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021. 2021;:46-46.
https://hdl.handle.net/21.15107/rcub_dais_11907 .
Mitić, Vojislav V., Serpa, Cristina, Stajčić, Aleksandar, Khamoushi, Kouros, Paunović, Vesna, Aleksić, Sanja, Vlahović, Branislav, "Magnetic materials, Curie-Weiss law and fractal correction" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021 (2021):46-46,
https://hdl.handle.net/21.15107/rcub_dais_11907 .

The clay minerals from greda deposit

Radosavljević-Mihajlović, A.; Mihajlović, K.; Kosić, I.; Arsenijević, D.; Mitić, Vojislav V.

(Belgrade : Serbian Ceramic Society, 2021)

TY  - CONF
AU  - Radosavljević-Mihajlović, A.
AU  - Mihajlović, K.
AU  - Kosić, I.
AU  - Arsenijević, D.
AU  - Mitić, Vojislav V.
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11897
AB  - The term "clay" refers to natural materials composed of fine minerals, which in their composition contain water molecules, which give it the property of plasticity, which is lost by drying processes. The basic physical and chemical characteristics of clay are low permeability, the possibility of cation exchange, thermal structural stability, swelling processes. These characteristic properties appear as a consequence of the crystal structure, in which the layers of SiO4, tetrahedra, extend infinitely in two dimensions. In this paper are presented the basic structural and crystallochemical properties of clay from Greda deposit.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
T1  - The clay minerals from greda deposit
SP  - 81
EP  - 81
UR  - https://hdl.handle.net/21.15107/rcub_dais_11897
ER  - 
@conference{
author = "Radosavljević-Mihajlović, A. and Mihajlović, K. and Kosić, I. and Arsenijević, D. and Mitić, Vojislav V.",
year = "2021",
abstract = "The term "clay" refers to natural materials composed of fine minerals, which in their composition contain water molecules, which give it the property of plasticity, which is lost by drying processes. The basic physical and chemical characteristics of clay are low permeability, the possibility of cation exchange, thermal structural stability, swelling processes. These characteristic properties appear as a consequence of the crystal structure, in which the layers of SiO4, tetrahedra, extend infinitely in two dimensions. In this paper are presented the basic structural and crystallochemical properties of clay from Greda deposit.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021",
title = "The clay minerals from greda deposit",
pages = "81-81",
url = "https://hdl.handle.net/21.15107/rcub_dais_11897"
}
Radosavljević-Mihajlović, A., Mihajlović, K., Kosić, I., Arsenijević, D.,& Mitić, V. V.. (2021). The clay minerals from greda deposit. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
Belgrade : Serbian Ceramic Society., 81-81.
https://hdl.handle.net/21.15107/rcub_dais_11897
Radosavljević-Mihajlović A, Mihajlović K, Kosić I, Arsenijević D, Mitić VV. The clay minerals from greda deposit. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021. 2021;:81-81.
https://hdl.handle.net/21.15107/rcub_dais_11897 .
Radosavljević-Mihajlović, A., Mihajlović, K., Kosić, I., Arsenijević, D., Mitić, Vojislav V., "The clay minerals from greda deposit" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021 (2021):81-81,
https://hdl.handle.net/21.15107/rcub_dais_11897 .

Bamboo‐Membrane Inspired Multilevel Ultrafast Interlayer Ion Transport for Superior Volumetric Energy Storage

Mei, Jun; Peng, Xiaomin; Zhang, Qian; Zhang, Xiaoqi; Liao, Ting; Mitić, Vojislav V.; Sun, Ziqi

(Wiley, 2021)

TY  - JOUR
AU  - Mei, Jun
AU  - Peng, Xiaomin
AU  - Zhang, Qian
AU  - Zhang, Xiaoqi
AU  - Liao, Ting
AU  - Mitić, Vojislav V.
AU  - Sun, Ziqi
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11801
AB  - Interlayer transport of charges and carriers of 2D nanomaterials is a critical parameter that governs the material and device performance in energy storage applications. Inspired by multilevel natural bamboo-membrane with ultrafast water and electrolyte transport properties to support its super-rapid growth rate, 2D–2D multilevel heterostructured graphene-based membranes with tailored gradient interlayer channels are rationally designed for achieving ultrafast interlayer ion transport. The bioinspired heterostructured membranes possess multilevel interlayer spacing distributions, where the closely packed layers with sub-nanosized interlayer space provide ultrafast confined interlayer ion transport, while the loosely stacked outer layers consisting of open channels with large distances up to few micrometres are favorable for rapid wetting and penetration of liquid electrolytes. The combination of advantages of large-size open channels and nanosized confined channels offers ultrafast electrolyte wetting and permeation and interlayer ion transport and provide the devices with superior volumetric capacity as free-standing electrodes for rechargeable batteries.
PB  - Wiley
T2  - Advanced Functional Materials
T1  - Bamboo‐Membrane Inspired Multilevel Ultrafast Interlayer Ion Transport for Superior Volumetric Energy Storage
SP  - 2100299
VL  - 31
IS  - 31
DO  - 10.1002/adfm.202100299
UR  - https://hdl.handle.net/21.15107/rcub_dais_11801
ER  - 
@article{
author = "Mei, Jun and Peng, Xiaomin and Zhang, Qian and Zhang, Xiaoqi and Liao, Ting and Mitić, Vojislav V. and Sun, Ziqi",
year = "2021",
abstract = "Interlayer transport of charges and carriers of 2D nanomaterials is a critical parameter that governs the material and device performance in energy storage applications. Inspired by multilevel natural bamboo-membrane with ultrafast water and electrolyte transport properties to support its super-rapid growth rate, 2D–2D multilevel heterostructured graphene-based membranes with tailored gradient interlayer channels are rationally designed for achieving ultrafast interlayer ion transport. The bioinspired heterostructured membranes possess multilevel interlayer spacing distributions, where the closely packed layers with sub-nanosized interlayer space provide ultrafast confined interlayer ion transport, while the loosely stacked outer layers consisting of open channels with large distances up to few micrometres are favorable for rapid wetting and penetration of liquid electrolytes. The combination of advantages of large-size open channels and nanosized confined channels offers ultrafast electrolyte wetting and permeation and interlayer ion transport and provide the devices with superior volumetric capacity as free-standing electrodes for rechargeable batteries.",
publisher = "Wiley",
journal = "Advanced Functional Materials",
title = "Bamboo‐Membrane Inspired Multilevel Ultrafast Interlayer Ion Transport for Superior Volumetric Energy Storage",
pages = "2100299",
volume = "31",
number = "31",
doi = "10.1002/adfm.202100299",
url = "https://hdl.handle.net/21.15107/rcub_dais_11801"
}
Mei, J., Peng, X., Zhang, Q., Zhang, X., Liao, T., Mitić, V. V.,& Sun, Z.. (2021). Bamboo‐Membrane Inspired Multilevel Ultrafast Interlayer Ion Transport for Superior Volumetric Energy Storage. in Advanced Functional Materials
Wiley., 31(31), 2100299.
https://doi.org/10.1002/adfm.202100299
https://hdl.handle.net/21.15107/rcub_dais_11801
Mei J, Peng X, Zhang Q, Zhang X, Liao T, Mitić VV, Sun Z. Bamboo‐Membrane Inspired Multilevel Ultrafast Interlayer Ion Transport for Superior Volumetric Energy Storage. in Advanced Functional Materials. 2021;31(31):2100299.
doi:10.1002/adfm.202100299
https://hdl.handle.net/21.15107/rcub_dais_11801 .
Mei, Jun, Peng, Xiaomin, Zhang, Qian, Zhang, Xiaoqi, Liao, Ting, Mitić, Vojislav V., Sun, Ziqi, "Bamboo‐Membrane Inspired Multilevel Ultrafast Interlayer Ion Transport for Superior Volumetric Energy Storage" in Advanced Functional Materials, 31, no. 31 (2021):2100299,
https://doi.org/10.1002/adfm.202100299 .,
https://hdl.handle.net/21.15107/rcub_dais_11801 .
42
3

Characterization of silicon carbide ceramics obtained from porous carbon structure achieved by plant carbonization

Dodevski, Vladimir; Pagnacco, Maja C.; Radović, Ivana; Rosić, Milena; Janković, Bojan; Stojmenović, Marija; Mitić, Vojislav V.

(Elsevier, 2020)

TY  - JOUR
AU  - Dodevski, Vladimir
AU  - Pagnacco, Maja C.
AU  - Radović, Ivana
AU  - Rosić, Milena
AU  - Janković, Bojan
AU  - Stojmenović, Marija
AU  - Mitić, Vojislav V.
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/8726
AB  - The aim of this research was to obtain a carbon solid residue by the carbonization process of biomass in an inert atmosphere which, through physical activation and chemical treatment (using TEOS - tetraethyl orthosilicate) would allow creation of highly porous and spatially distinct ordered bio-SiC ceramics. The results of carbonization experiments at several operating temperatures and activation of carbons with multiple-cycle treatments TEOS clearly showed the possibility of obtaining SiC nano-structures, after performing the carbothermal reduction at 1400 °C. The increase in the activation temperature and the duration time starts the development of the SiC particles inside the porous structure. The XRPD analysis showed that the major SiC polytype has cubic SiC (β-SiC) structure and remainder is hexagonal SiC polytypic (α-SiC) structure. It was established that the carbons obtained from carbonization of the Platanus orientalis L. plane tree fruit (PTF) precursor and activated at 850 °C with longer holding times (1 and 2 h) exhibit β-SiC (cubic) nano-wires. A possible nano-wires increment mechanism was suggested. The obtained results represent significant contribution in understanding the process as well as the main characteristics of SiC nano-materials and their possible applications.
PB  - Elsevier
T2  - Materials Chemistry and Physics
T1  - Characterization of silicon carbide ceramics obtained from porous carbon structure achieved by plant carbonization
SP  - 122768
VL  - 245
DO  - 10.1016/j.matchemphys.2020.122768
UR  - https://hdl.handle.net/21.15107/rcub_dais_8726
ER  - 
@article{
author = "Dodevski, Vladimir and Pagnacco, Maja C. and Radović, Ivana and Rosić, Milena and Janković, Bojan and Stojmenović, Marija and Mitić, Vojislav V.",
year = "2020",
abstract = "The aim of this research was to obtain a carbon solid residue by the carbonization process of biomass in an inert atmosphere which, through physical activation and chemical treatment (using TEOS - tetraethyl orthosilicate) would allow creation of highly porous and spatially distinct ordered bio-SiC ceramics. The results of carbonization experiments at several operating temperatures and activation of carbons with multiple-cycle treatments TEOS clearly showed the possibility of obtaining SiC nano-structures, after performing the carbothermal reduction at 1400 °C. The increase in the activation temperature and the duration time starts the development of the SiC particles inside the porous structure. The XRPD analysis showed that the major SiC polytype has cubic SiC (β-SiC) structure and remainder is hexagonal SiC polytypic (α-SiC) structure. It was established that the carbons obtained from carbonization of the Platanus orientalis L. plane tree fruit (PTF) precursor and activated at 850 °C with longer holding times (1 and 2 h) exhibit β-SiC (cubic) nano-wires. A possible nano-wires increment mechanism was suggested. The obtained results represent significant contribution in understanding the process as well as the main characteristics of SiC nano-materials and their possible applications.",
publisher = "Elsevier",
journal = "Materials Chemistry and Physics",
title = "Characterization of silicon carbide ceramics obtained from porous carbon structure achieved by plant carbonization",
pages = "122768",
volume = "245",
doi = "10.1016/j.matchemphys.2020.122768",
url = "https://hdl.handle.net/21.15107/rcub_dais_8726"
}
Dodevski, V., Pagnacco, M. C., Radović, I., Rosić, M., Janković, B., Stojmenović, M.,& Mitić, V. V.. (2020). Characterization of silicon carbide ceramics obtained from porous carbon structure achieved by plant carbonization. in Materials Chemistry and Physics
Elsevier., 245, 122768.
https://doi.org/10.1016/j.matchemphys.2020.122768
https://hdl.handle.net/21.15107/rcub_dais_8726
Dodevski V, Pagnacco MC, Radović I, Rosić M, Janković B, Stojmenović M, Mitić VV. Characterization of silicon carbide ceramics obtained from porous carbon structure achieved by plant carbonization. in Materials Chemistry and Physics. 2020;245:122768.
doi:10.1016/j.matchemphys.2020.122768
https://hdl.handle.net/21.15107/rcub_dais_8726 .
Dodevski, Vladimir, Pagnacco, Maja C., Radović, Ivana, Rosić, Milena, Janković, Bojan, Stojmenović, Marija, Mitić, Vojislav V., "Characterization of silicon carbide ceramics obtained from porous carbon structure achieved by plant carbonization" in Materials Chemistry and Physics, 245 (2020):122768,
https://doi.org/10.1016/j.matchemphys.2020.122768 .,
https://hdl.handle.net/21.15107/rcub_dais_8726 .
1
4
3
3

Brownian motion and fractal nature

Mitić, Vojislav V.; Lazović, Goran; Milošević, Dušan; Lu, Chun-An; Manojlović, Jelena; Tsay, Shwu-Chen; Kruchinin, Sergey; Vlahović, Branislav

(World Scientific Pub Co Pte Lt, 2020)

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Milošević, Dušan
AU  - Lu, Chun-An
AU  - Manojlović, Jelena
AU  - Tsay, Shwu-Chen
AU  - Kruchinin, Sergey
AU  - Vlahović, Branislav
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10024
UR  - https://dais.sanu.ac.rs/123456789/10025
AB  - The main goal of our research is to find the connection between micro particles and microorganisms motion in the Nature, considered as Brownian’s Motion within the fractal’s nature. For ceramics and generally material science it is important to clarify the particles motion and other phenomena, especially for grains and pores. Our idea is to establish control over the relation order–disorder on particle motion and their collision effects by Brownian motion phenomena in the frame of fractal nature matter. We performed some experiments and got interesting results based on microorganism motion initiated by different outer energetic impulses. This is practically the idea of biomimetic correlation between particles and microorganisms Worlds, what is very original and leads towards biunivocal different phenomena’s understanding. Another idea is to establish some controlling effects for electro ceramic particle motion in chemical-materials sciences consolidation by some phenomena in the nature. These important research directions open new frontiers with very specific reflections for future of microelectronics materials.
PB  - World Scientific Pub Co Pte Lt
T2  - Modern Physics Letters B
T1  - Brownian motion and fractal nature
SP  - 2040061
VL  - 34
IS  - 19n20
DO  - 10.1142/S0217984920400618
UR  - https://hdl.handle.net/21.15107/rcub_dais_10025
ER  - 
@article{
author = "Mitić, Vojislav V. and Lazović, Goran and Milošević, Dušan and Lu, Chun-An and Manojlović, Jelena and Tsay, Shwu-Chen and Kruchinin, Sergey and Vlahović, Branislav",
year = "2020",
abstract = "The main goal of our research is to find the connection between micro particles and microorganisms motion in the Nature, considered as Brownian’s Motion within the fractal’s nature. For ceramics and generally material science it is important to clarify the particles motion and other phenomena, especially for grains and pores. Our idea is to establish control over the relation order–disorder on particle motion and their collision effects by Brownian motion phenomena in the frame of fractal nature matter. We performed some experiments and got interesting results based on microorganism motion initiated by different outer energetic impulses. This is practically the idea of biomimetic correlation between particles and microorganisms Worlds, what is very original and leads towards biunivocal different phenomena’s understanding. Another idea is to establish some controlling effects for electro ceramic particle motion in chemical-materials sciences consolidation by some phenomena in the nature. These important research directions open new frontiers with very specific reflections for future of microelectronics materials.",
publisher = "World Scientific Pub Co Pte Lt",
journal = "Modern Physics Letters B",
title = "Brownian motion and fractal nature",
pages = "2040061",
volume = "34",
number = "19n20",
doi = "10.1142/S0217984920400618",
url = "https://hdl.handle.net/21.15107/rcub_dais_10025"
}
Mitić, V. V., Lazović, G., Milošević, D., Lu, C., Manojlović, J., Tsay, S., Kruchinin, S.,& Vlahović, B.. (2020). Brownian motion and fractal nature. in Modern Physics Letters B
World Scientific Pub Co Pte Lt., 34(19n20), 2040061.
https://doi.org/10.1142/S0217984920400618
https://hdl.handle.net/21.15107/rcub_dais_10025
Mitić VV, Lazović G, Milošević D, Lu C, Manojlović J, Tsay S, Kruchinin S, Vlahović B. Brownian motion and fractal nature. in Modern Physics Letters B. 2020;34(19n20):2040061.
doi:10.1142/S0217984920400618
https://hdl.handle.net/21.15107/rcub_dais_10025 .
Mitić, Vojislav V., Lazović, Goran, Milošević, Dušan, Lu, Chun-An, Manojlović, Jelena, Tsay, Shwu-Chen, Kruchinin, Sergey, Vlahović, Branislav, "Brownian motion and fractal nature" in Modern Physics Letters B, 34, no. 19n20 (2020):2040061,
https://doi.org/10.1142/S0217984920400618 .,
https://hdl.handle.net/21.15107/rcub_dais_10025 .
1
2
4

Brownian motion and fractal nature

Mitić, Vojislav V.; Lazović, Goran; Milošević, Dušan; Lu, Chun-An; Manojlović, Jelena; Tsay, Shwu-Chen; Kruchinin, Sergey; Vlahović, Branislav

(World Scientific Pub Co Pte Lt, 2020)

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Milošević, Dušan
AU  - Lu, Chun-An
AU  - Manojlović, Jelena
AU  - Tsay, Shwu-Chen
AU  - Kruchinin, Sergey
AU  - Vlahović, Branislav
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10024
AB  - The main goal of our research is to find the connection between micro particles and microorganisms motion in the Nature, considered as Brownian’s Motion within the fractal’s nature. For ceramics and generally material science it is important to clarify the particles motion and other phenomena, especially for grains and pores. Our idea is to establish control over the relation order–disorder on particle motion and their collision effects by Brownian motion phenomena in the frame of fractal nature matter. We performed some experiments and got interesting results based on microorganism motion initiated by different outer energetic impulses. This is practically the idea of biomimetic correlation between particles and microorganisms Worlds, what is very original and leads towards biunivocal different phenomena’s understanding. Another idea is to establish some controlling effects for electro ceramic particle motion in chemical-materials sciences consolidation by some phenomena in the nature. These important research directions open new frontiers with very specific reflections for future of microelectronics materials.
PB  - World Scientific Pub Co Pte Lt
T2  - Modern Physics Letters B
T1  - Brownian motion and fractal nature
SP  - 2040061
VL  - 34
IS  - 19n20
DO  - 10.1142/S0217984920400618
UR  - https://hdl.handle.net/21.15107/rcub_dais_10024
ER  - 
@article{
author = "Mitić, Vojislav V. and Lazović, Goran and Milošević, Dušan and Lu, Chun-An and Manojlović, Jelena and Tsay, Shwu-Chen and Kruchinin, Sergey and Vlahović, Branislav",
year = "2020",
abstract = "The main goal of our research is to find the connection between micro particles and microorganisms motion in the Nature, considered as Brownian’s Motion within the fractal’s nature. For ceramics and generally material science it is important to clarify the particles motion and other phenomena, especially for grains and pores. Our idea is to establish control over the relation order–disorder on particle motion and their collision effects by Brownian motion phenomena in the frame of fractal nature matter. We performed some experiments and got interesting results based on microorganism motion initiated by different outer energetic impulses. This is practically the idea of biomimetic correlation between particles and microorganisms Worlds, what is very original and leads towards biunivocal different phenomena’s understanding. Another idea is to establish some controlling effects for electro ceramic particle motion in chemical-materials sciences consolidation by some phenomena in the nature. These important research directions open new frontiers with very specific reflections for future of microelectronics materials.",
publisher = "World Scientific Pub Co Pte Lt",
journal = "Modern Physics Letters B",
title = "Brownian motion and fractal nature",
pages = "2040061",
volume = "34",
number = "19n20",
doi = "10.1142/S0217984920400618",
url = "https://hdl.handle.net/21.15107/rcub_dais_10024"
}
Mitić, V. V., Lazović, G., Milošević, D., Lu, C., Manojlović, J., Tsay, S., Kruchinin, S.,& Vlahović, B.. (2020). Brownian motion and fractal nature. in Modern Physics Letters B
World Scientific Pub Co Pte Lt., 34(19n20), 2040061.
https://doi.org/10.1142/S0217984920400618
https://hdl.handle.net/21.15107/rcub_dais_10024
Mitić VV, Lazović G, Milošević D, Lu C, Manojlović J, Tsay S, Kruchinin S, Vlahović B. Brownian motion and fractal nature. in Modern Physics Letters B. 2020;34(19n20):2040061.
doi:10.1142/S0217984920400618
https://hdl.handle.net/21.15107/rcub_dais_10024 .
Mitić, Vojislav V., Lazović, Goran, Milošević, Dušan, Lu, Chun-An, Manojlović, Jelena, Tsay, Shwu-Chen, Kruchinin, Sergey, Vlahović, Branislav, "Brownian motion and fractal nature" in Modern Physics Letters B, 34, no. 19n20 (2020):2040061,
https://doi.org/10.1142/S0217984920400618 .,
https://hdl.handle.net/21.15107/rcub_dais_10024 .
1
2
4

The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space

Mitić, Vojislav V.; Lazović, Goran; Mirjanić, Dragoljub; Fecht, Hans; Vlahović, Branislav; Arnold, Walter

(World Scientific, 2020)

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Mirjanić, Dragoljub
AU  - Fecht, Hans
AU  - Vlahović, Branislav
AU  - Arnold, Walter
PY  - 2020
UR  - https://www.worldscientific.com/doi/abs/10.1142/S0217984920504217
UR  - https://dais.sanu.ac.rs/123456789/9820
AB  - Today in the age of advanced ceramic civilization, there are a variety of applications for modern ceramics materials with specific properties. Our up-to date research recognizes that ceramics have a fractal configuration nature on the basis of different phenomena. The key property of fractals is their scale-independence. The practical value is that the fractal objects’ interaction and energy is possible at any reasonable scale of magnitude, including the nanoscale and may be even below. This is a consequence of fractal scale independence. This brings us to the conclusion that properties of fractals are valid on any scale (macro, micro, or nano). We also analyzed these questions with experimental results obtained from a comet, here 67P, and also from ceramic grain and pore morphologies on the microstructure level. Fractality, as a scale-independent morphology, provides significant variety of opportunities, for example for energy storage. From the viewpoint of scaling, the relation between large and small in fractal analysis is very important. An ideal fractal can be magnified endlessly but natural morphologies cannot, what is the new light in materials sciences and space.
PB  - World Scientific
T2  - Modern Physics Letters B
T1  - The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space
SP  - 2050421
VL  - 34
IS  - 22
DO  - 10.1142/S0217984920504217
UR  - https://hdl.handle.net/21.15107/rcub_dais_9820
ER  - 
@article{
author = "Mitić, Vojislav V. and Lazović, Goran and Mirjanić, Dragoljub and Fecht, Hans and Vlahović, Branislav and Arnold, Walter",
year = "2020",
abstract = "Today in the age of advanced ceramic civilization, there are a variety of applications for modern ceramics materials with specific properties. Our up-to date research recognizes that ceramics have a fractal configuration nature on the basis of different phenomena. The key property of fractals is their scale-independence. The practical value is that the fractal objects’ interaction and energy is possible at any reasonable scale of magnitude, including the nanoscale and may be even below. This is a consequence of fractal scale independence. This brings us to the conclusion that properties of fractals are valid on any scale (macro, micro, or nano). We also analyzed these questions with experimental results obtained from a comet, here 67P, and also from ceramic grain and pore morphologies on the microstructure level. Fractality, as a scale-independent morphology, provides significant variety of opportunities, for example for energy storage. From the viewpoint of scaling, the relation between large and small in fractal analysis is very important. An ideal fractal can be magnified endlessly but natural morphologies cannot, what is the new light in materials sciences and space.",
publisher = "World Scientific",
journal = "Modern Physics Letters B",
title = "The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space",
pages = "2050421",
volume = "34",
number = "22",
doi = "10.1142/S0217984920504217",
url = "https://hdl.handle.net/21.15107/rcub_dais_9820"
}
Mitić, V. V., Lazović, G., Mirjanić, D., Fecht, H., Vlahović, B.,& Arnold, W.. (2020). The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space. in Modern Physics Letters B
World Scientific., 34(22), 2050421.
https://doi.org/10.1142/S0217984920504217
https://hdl.handle.net/21.15107/rcub_dais_9820
Mitić VV, Lazović G, Mirjanić D, Fecht H, Vlahović B, Arnold W. The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space. in Modern Physics Letters B. 2020;34(22):2050421.
doi:10.1142/S0217984920504217
https://hdl.handle.net/21.15107/rcub_dais_9820 .
Mitić, Vojislav V., Lazović, Goran, Mirjanić, Dragoljub, Fecht, Hans, Vlahović, Branislav, Arnold, Walter, "The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space" in Modern Physics Letters B, 34, no. 22 (2020):2050421,
https://doi.org/10.1142/S0217984920504217 .,
https://hdl.handle.net/21.15107/rcub_dais_9820 .
2
2
3

The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space

Mitić, Vojislav V.; Lazović, Goran; Mirjanić, Dragoljub; Fecht, Hans; Vlahović, Branislav; Arnold, Walter

(World Scientific, 2020)

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Mirjanić, Dragoljub
AU  - Fecht, Hans
AU  - Vlahović, Branislav
AU  - Arnold, Walter
PY  - 2020
UR  - https://www.worldscientific.com/doi/abs/10.1142/S0217984920504217
UR  - https://dais.sanu.ac.rs/123456789/9819
AB  - Today in the age of advanced ceramic civilization, there are a variety of applications for modern ceramics materials with specific properties. Our up-to date research recognizes that ceramics have a fractal configuration nature on the basis of different phenomena. The key property of fractals is their scale-independence. The practical value is that the fractal objects’ interaction and energy is possible at any reasonable scale of magnitude, including the nanoscale and may be even below. This is a consequence of fractal scale independence. This brings us to the conclusion that properties of fractals are valid on any scale (macro, micro, or nano). We also analyzed these questions with experimental results obtained from a comet, here 67P, and also from ceramic grain and pore morphologies on the microstructure level. Fractality, as a scale-independent morphology, provides significant variety of opportunities, for example for energy storage. From the viewpoint of scaling, the relation between large and small in fractal analysis is very important. An ideal fractal can be magnified endlessly but natural morphologies cannot, what is the new light in materials sciences and space.
PB  - World Scientific
T2  - Modern Physics Letters B
T1  - The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space
SP  - 2050421
VL  - 34
IS  - 22
DO  - 10.1142/S0217984920504217
UR  - https://hdl.handle.net/21.15107/rcub_dais_9819
ER  - 
@article{
author = "Mitić, Vojislav V. and Lazović, Goran and Mirjanić, Dragoljub and Fecht, Hans and Vlahović, Branislav and Arnold, Walter",
year = "2020",
abstract = "Today in the age of advanced ceramic civilization, there are a variety of applications for modern ceramics materials with specific properties. Our up-to date research recognizes that ceramics have a fractal configuration nature on the basis of different phenomena. The key property of fractals is their scale-independence. The practical value is that the fractal objects’ interaction and energy is possible at any reasonable scale of magnitude, including the nanoscale and may be even below. This is a consequence of fractal scale independence. This brings us to the conclusion that properties of fractals are valid on any scale (macro, micro, or nano). We also analyzed these questions with experimental results obtained from a comet, here 67P, and also from ceramic grain and pore morphologies on the microstructure level. Fractality, as a scale-independent morphology, provides significant variety of opportunities, for example for energy storage. From the viewpoint of scaling, the relation between large and small in fractal analysis is very important. An ideal fractal can be magnified endlessly but natural morphologies cannot, what is the new light in materials sciences and space.",
publisher = "World Scientific",
journal = "Modern Physics Letters B",
title = "The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space",
pages = "2050421",
volume = "34",
number = "22",
doi = "10.1142/S0217984920504217",
url = "https://hdl.handle.net/21.15107/rcub_dais_9819"
}
Mitić, V. V., Lazović, G., Mirjanić, D., Fecht, H., Vlahović, B.,& Arnold, W.. (2020). The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space. in Modern Physics Letters B
World Scientific., 34(22), 2050421.
https://doi.org/10.1142/S0217984920504217
https://hdl.handle.net/21.15107/rcub_dais_9819
Mitić VV, Lazović G, Mirjanić D, Fecht H, Vlahović B, Arnold W. The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space. in Modern Physics Letters B. 2020;34(22):2050421.
doi:10.1142/S0217984920504217
https://hdl.handle.net/21.15107/rcub_dais_9819 .
Mitić, Vojislav V., Lazović, Goran, Mirjanić, Dragoljub, Fecht, Hans, Vlahović, Branislav, Arnold, Walter, "The fractal nature as new frontier in microstructural characterization and relativization of scale sizes within space" in Modern Physics Letters B, 34, no. 22 (2020):2050421,
https://doi.org/10.1142/S0217984920504217 .,
https://hdl.handle.net/21.15107/rcub_dais_9819 .
2
2
3

The Artificial Neural Networks Applied for Microelectronics Intergranular Relations Determination

Mitić, Vojislav V.; Lazović, Goran; Ribar, Srđan; Lu, Chun-An; Radović, Ivana; Stajčić, Aleksandar; Fecht, Hans; Vlahović, Branislav

(Taylor & Francis, 2020)

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Ribar, Srđan
AU  - Lu, Chun-An
AU  - Radović, Ivana
AU  - Stajčić, Aleksandar
AU  - Fecht, Hans
AU  - Vlahović, Branislav
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/9542
AB  - This paper is based on fundamental research to develop the interface structure around the grains and to control the layers between two grains, as a prospective media for high-level electronic parameters integrations. We performed the experiments based on nano-BaTiO3 powders with Y additives. All results on dielectric parameters on submicron level are the part of global values the same measured characteristics at the bulk samples. The original idea is to develop the new computing ways to network electronic parameters in thin layers between the grains on the way to get and to compare the values on the samples. Artificial neural networks are computing tools that map input-output data and could be applied on ceramic electronic parameters. These are developed in the manner signals are processed in biological neural networks. The signals are processed by using elements which represent artificial neurons, which have a simple function to process input signal, as well as adjustable parameter which has an influence to change output signal. The total network output presents the sum of a large number neurons outputs. This important research idea is to connect analysis results and neural networks. There is a great interest to connect all of these microcapacitances by neural network with the goal to compare the results in the standard bulk samples measurements frame and microelectronics parameters. The final result of the study was functional relation definition between consolidation parameters, voltage (U) and relative capacitance change, from the level of the bulk sample down to the grains boundaries.
PB  - Taylor & Francis
T2  - Integrated Ferroelectrics
T1  - The Artificial Neural Networks Applied for Microelectronics Intergranular Relations Determination
SP  - 135
EP  - 146
VL  - 212
IS  - 1
DO  - 10.1080/10584587.2020.1819042
UR  - https://hdl.handle.net/21.15107/rcub_dais_9542
ER  - 
@article{
author = "Mitić, Vojislav V. and Lazović, Goran and Ribar, Srđan and Lu, Chun-An and Radović, Ivana and Stajčić, Aleksandar and Fecht, Hans and Vlahović, Branislav",
year = "2020",
abstract = "This paper is based on fundamental research to develop the interface structure around the grains and to control the layers between two grains, as a prospective media for high-level electronic parameters integrations. We performed the experiments based on nano-BaTiO3 powders with Y additives. All results on dielectric parameters on submicron level are the part of global values the same measured characteristics at the bulk samples. The original idea is to develop the new computing ways to network electronic parameters in thin layers between the grains on the way to get and to compare the values on the samples. Artificial neural networks are computing tools that map input-output data and could be applied on ceramic electronic parameters. These are developed in the manner signals are processed in biological neural networks. The signals are processed by using elements which represent artificial neurons, which have a simple function to process input signal, as well as adjustable parameter which has an influence to change output signal. The total network output presents the sum of a large number neurons outputs. This important research idea is to connect analysis results and neural networks. There is a great interest to connect all of these microcapacitances by neural network with the goal to compare the results in the standard bulk samples measurements frame and microelectronics parameters. The final result of the study was functional relation definition between consolidation parameters, voltage (U) and relative capacitance change, from the level of the bulk sample down to the grains boundaries.",
publisher = "Taylor & Francis",
journal = "Integrated Ferroelectrics",
title = "The Artificial Neural Networks Applied for Microelectronics Intergranular Relations Determination",
pages = "135-146",
volume = "212",
number = "1",
doi = "10.1080/10584587.2020.1819042",
url = "https://hdl.handle.net/21.15107/rcub_dais_9542"
}
Mitić, V. V., Lazović, G., Ribar, S., Lu, C., Radović, I., Stajčić, A., Fecht, H.,& Vlahović, B.. (2020). The Artificial Neural Networks Applied for Microelectronics Intergranular Relations Determination. in Integrated Ferroelectrics
Taylor & Francis., 212(1), 135-146.
https://doi.org/10.1080/10584587.2020.1819042
https://hdl.handle.net/21.15107/rcub_dais_9542
Mitić VV, Lazović G, Ribar S, Lu C, Radović I, Stajčić A, Fecht H, Vlahović B. The Artificial Neural Networks Applied for Microelectronics Intergranular Relations Determination. in Integrated Ferroelectrics. 2020;212(1):135-146.
doi:10.1080/10584587.2020.1819042
https://hdl.handle.net/21.15107/rcub_dais_9542 .
Mitić, Vojislav V., Lazović, Goran, Ribar, Srđan, Lu, Chun-An, Radović, Ivana, Stajčić, Aleksandar, Fecht, Hans, Vlahović, Branislav, "The Artificial Neural Networks Applied for Microelectronics Intergranular Relations Determination" in Integrated Ferroelectrics, 212, no. 1 (2020):135-146,
https://doi.org/10.1080/10584587.2020.1819042 .,
https://hdl.handle.net/21.15107/rcub_dais_9542 .
2
1
4

Ceramics, materials, microelectronics and graph theory new frontiers

Ranđelović, Branislav M.; Mitić, Vojislav V.; Ribar, Srđan; Lu, Chun-An; Radović, Ivana; Stajčić, Aleksandar; Novaković, Igor; Vlahović, Branislav

(World Scientific Pub Co Pte Lt, 2020)

TY  - JOUR
AU  - Ranđelović, Branislav M.
AU  - Mitić, Vojislav V.
AU  - Ribar, Srđan
AU  - Lu, Chun-An
AU  - Radović, Ivana
AU  - Stajčić, Aleksandar
AU  - Novaković, Igor
AU  - Vlahović, Branislav
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10032
AB  - This research is focused on further developing of application and use of graph theory in order to describe relations between grains and to establish control over layers. We used functionalized BaTiO3 nanoparticles coated with Yttrium-based salt. The capacitance change results on super-microstructure levels are the part of the measured values on the bulk samples. The new idea is graph theory application for determination of electronic parameters distribution at the grain boundary and to compare them with the bulk measured values. We present them with vertices in graph, corresponding with grains, connected with edges. Capacitance change with applied voltage was measured on samples sintered in air and nitrogen, up to 100 V. Using graph theory, it has been shown that capacitance change can be successfully calculated on the layers between grains. Within the idea how to get parameters values at microlevel between the grains and pores, mathematical tool can be developed. Besides previously described 1D case, some original calculations for 2D cases were performed in this study, proving successful graph theory use for the calculation of values at nanolevel, leading to a further minituarization in micropackaging.
PB  - World Scientific Pub Co Pte Lt
T2  - Modern Physics Letters B
T1  - Ceramics, materials, microelectronics and graph theory new frontiers
SP  - 2150159
VL  - 34
DO  - 10.1142/S0217984921501591
UR  - https://hdl.handle.net/21.15107/rcub_dais_10032
ER  - 
@article{
author = "Ranđelović, Branislav M. and Mitić, Vojislav V. and Ribar, Srđan and Lu, Chun-An and Radović, Ivana and Stajčić, Aleksandar and Novaković, Igor and Vlahović, Branislav",
year = "2020",
abstract = "This research is focused on further developing of application and use of graph theory in order to describe relations between grains and to establish control over layers. We used functionalized BaTiO3 nanoparticles coated with Yttrium-based salt. The capacitance change results on super-microstructure levels are the part of the measured values on the bulk samples. The new idea is graph theory application for determination of electronic parameters distribution at the grain boundary and to compare them with the bulk measured values. We present them with vertices in graph, corresponding with grains, connected with edges. Capacitance change with applied voltage was measured on samples sintered in air and nitrogen, up to 100 V. Using graph theory, it has been shown that capacitance change can be successfully calculated on the layers between grains. Within the idea how to get parameters values at microlevel between the grains and pores, mathematical tool can be developed. Besides previously described 1D case, some original calculations for 2D cases were performed in this study, proving successful graph theory use for the calculation of values at nanolevel, leading to a further minituarization in micropackaging.",
publisher = "World Scientific Pub Co Pte Lt",
journal = "Modern Physics Letters B",
title = "Ceramics, materials, microelectronics and graph theory new frontiers",
pages = "2150159",
volume = "34",
doi = "10.1142/S0217984921501591",
url = "https://hdl.handle.net/21.15107/rcub_dais_10032"
}
Ranđelović, B. M., Mitić, V. V., Ribar, S., Lu, C., Radović, I., Stajčić, A., Novaković, I.,& Vlahović, B.. (2020). Ceramics, materials, microelectronics and graph theory new frontiers. in Modern Physics Letters B
World Scientific Pub Co Pte Lt., 34, 2150159.
https://doi.org/10.1142/S0217984921501591
https://hdl.handle.net/21.15107/rcub_dais_10032
Ranđelović BM, Mitić VV, Ribar S, Lu C, Radović I, Stajčić A, Novaković I, Vlahović B. Ceramics, materials, microelectronics and graph theory new frontiers. in Modern Physics Letters B. 2020;34:2150159.
doi:10.1142/S0217984921501591
https://hdl.handle.net/21.15107/rcub_dais_10032 .
Ranđelović, Branislav M., Mitić, Vojislav V., Ribar, Srđan, Lu, Chun-An, Radović, Ivana, Stajčić, Aleksandar, Novaković, Igor, Vlahović, Branislav, "Ceramics, materials, microelectronics and graph theory new frontiers" in Modern Physics Letters B, 34 (2020):2150159,
https://doi.org/10.1142/S0217984921501591 .,
https://hdl.handle.net/21.15107/rcub_dais_10032 .
4
3
3

Ceramics, materials, microelectronics and graph theory new frontiers

Ranđelović, Branislav M.; Mitić, Vojislav V.; Ribar, Srđan; Lu, Chun-An; Radović, Ivana; Stajčić, Aleksandar; Novaković, Igor; Vlahović, Branislav

(World Scientific Pub Co Pte Lt, 2020)

TY  - JOUR
AU  - Ranđelović, Branislav M.
AU  - Mitić, Vojislav V.
AU  - Ribar, Srđan
AU  - Lu, Chun-An
AU  - Radović, Ivana
AU  - Stajčić, Aleksandar
AU  - Novaković, Igor
AU  - Vlahović, Branislav
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/10031
AB  - This research is focused on further developing of application and use of graph theory in order to describe relations between grains and to establish control over layers. We used functionalized BaTiO3 nanoparticles coated with Yttrium-based salt. The capacitance change results on super-microstructure levels are the part of the measured values on the bulk samples. The new idea is graph theory application for determination of electronic parameters distribution at the grain boundary and to compare them with the bulk measured values. We present them with vertices in graph, corresponding with grains, connected with edges. Capacitance change with applied voltage was measured on samples sintered in air and nitrogen, up to 100 V. Using graph theory, it has been shown that capacitance change can be successfully calculated on the layers between grains. Within the idea how to get parameters values at microlevel between the grains and pores, mathematical tool can be developed. Besides previously described 1D case, some original calculations for 2D cases were performed in this study, proving successful graph theory use for the calculation of values at nanolevel, leading to a further minituarization in micropackaging.
PB  - World Scientific Pub Co Pte Lt
T2  - Modern Physics Letters B
T1  - Ceramics, materials, microelectronics and graph theory new frontiers
SP  - 2150159
VL  - 34
DO  - 10.1142/S0217984921501591
UR  - https://hdl.handle.net/21.15107/rcub_dais_10031
ER  - 
@article{
author = "Ranđelović, Branislav M. and Mitić, Vojislav V. and Ribar, Srđan and Lu, Chun-An and Radović, Ivana and Stajčić, Aleksandar and Novaković, Igor and Vlahović, Branislav",
year = "2020",
abstract = "This research is focused on further developing of application and use of graph theory in order to describe relations between grains and to establish control over layers. We used functionalized BaTiO3 nanoparticles coated with Yttrium-based salt. The capacitance change results on super-microstructure levels are the part of the measured values on the bulk samples. The new idea is graph theory application for determination of electronic parameters distribution at the grain boundary and to compare them with the bulk measured values. We present them with vertices in graph, corresponding with grains, connected with edges. Capacitance change with applied voltage was measured on samples sintered in air and nitrogen, up to 100 V. Using graph theory, it has been shown that capacitance change can be successfully calculated on the layers between grains. Within the idea how to get parameters values at microlevel between the grains and pores, mathematical tool can be developed. Besides previously described 1D case, some original calculations for 2D cases were performed in this study, proving successful graph theory use for the calculation of values at nanolevel, leading to a further minituarization in micropackaging.",
publisher = "World Scientific Pub Co Pte Lt",
journal = "Modern Physics Letters B",
title = "Ceramics, materials, microelectronics and graph theory new frontiers",
pages = "2150159",
volume = "34",
doi = "10.1142/S0217984921501591",
url = "https://hdl.handle.net/21.15107/rcub_dais_10031"
}
Ranđelović, B. M., Mitić, V. V., Ribar, S., Lu, C., Radović, I., Stajčić, A., Novaković, I.,& Vlahović, B.. (2020). Ceramics, materials, microelectronics and graph theory new frontiers. in Modern Physics Letters B
World Scientific Pub Co Pte Lt., 34, 2150159.
https://doi.org/10.1142/S0217984921501591
https://hdl.handle.net/21.15107/rcub_dais_10031
Ranđelović BM, Mitić VV, Ribar S, Lu C, Radović I, Stajčić A, Novaković I, Vlahović B. Ceramics, materials, microelectronics and graph theory new frontiers. in Modern Physics Letters B. 2020;34:2150159.
doi:10.1142/S0217984921501591
https://hdl.handle.net/21.15107/rcub_dais_10031 .
Ranđelović, Branislav M., Mitić, Vojislav V., Ribar, Srđan, Lu, Chun-An, Radović, Ivana, Stajčić, Aleksandar, Novaković, Igor, Vlahović, Branislav, "Ceramics, materials, microelectronics and graph theory new frontiers" in Modern Physics Letters B, 34 (2020):2150159,
https://doi.org/10.1142/S0217984921501591 .,
https://hdl.handle.net/21.15107/rcub_dais_10031 .
4
3
3

Novel fractal analysis of nanograin growth in BaTiO3 thin film

Aminirastabi, Habibollah; Xue, Hao; Mitić, Vojislav V.; Lazović, Goran; Ji, Guoli; Peng, Dongliang

(Elsevier, 2020)

TY  - JOUR
AU  - Aminirastabi, Habibollah
AU  - Xue, Hao
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Ji, Guoli
AU  - Peng, Dongliang
PY  - 2020
UR  - http://www.sciencedirect.com/science/article/pii/S0254058419310764
UR  - https://dais.sanu.ac.rs/123456789/6886
AB  - The grain size and the ferroelectric morphology are the two most important factors in the research and development of advanced dielectric devices. It is important to synthesize nanostructures in order to achieve optimal grain size and inhibit grain growth while controlling the sintering parameters. It is also important to find new methods to study the grain growth during densification. BaTiO3 films were successfully obtained via the sol-gel spin coating method. In this paper, we report the deposition of nanostructured BaTiO3 thin film by spin coating of sol-gel precursors. The densification, grain growth and microstructure evolution have been studied. Moreover, a novel physical and mathematical fractal analysis have been applied successfully to the densification and nano grain growth of BaTiO3 thin film. The discrepancy between the fractal dimension and the grain growth with increasing temperatures and soaking time are presented and discussed.
PB  - Elsevier
T2  - Materials Chemistry and Physics
T1  - Novel fractal analysis of nanograin growth in BaTiO3 thin film
SP  - 122261
VL  - 239
DO  - 10.1016/j.matchemphys.2019.122261
UR  - https://hdl.handle.net/21.15107/rcub_dais_6886
ER  - 
@article{
author = "Aminirastabi, Habibollah and Xue, Hao and Mitić, Vojislav V. and Lazović, Goran and Ji, Guoli and Peng, Dongliang",
year = "2020",
abstract = "The grain size and the ferroelectric morphology are the two most important factors in the research and development of advanced dielectric devices. It is important to synthesize nanostructures in order to achieve optimal grain size and inhibit grain growth while controlling the sintering parameters. It is also important to find new methods to study the grain growth during densification. BaTiO3 films were successfully obtained via the sol-gel spin coating method. In this paper, we report the deposition of nanostructured BaTiO3 thin film by spin coating of sol-gel precursors. The densification, grain growth and microstructure evolution have been studied. Moreover, a novel physical and mathematical fractal analysis have been applied successfully to the densification and nano grain growth of BaTiO3 thin film. The discrepancy between the fractal dimension and the grain growth with increasing temperatures and soaking time are presented and discussed.",
publisher = "Elsevier",
journal = "Materials Chemistry and Physics",
title = "Novel fractal analysis of nanograin growth in BaTiO3 thin film",
pages = "122261",
volume = "239",
doi = "10.1016/j.matchemphys.2019.122261",
url = "https://hdl.handle.net/21.15107/rcub_dais_6886"
}
Aminirastabi, H., Xue, H., Mitić, V. V., Lazović, G., Ji, G.,& Peng, D.. (2020). Novel fractal analysis of nanograin growth in BaTiO3 thin film. in Materials Chemistry and Physics
Elsevier., 239, 122261.
https://doi.org/10.1016/j.matchemphys.2019.122261
https://hdl.handle.net/21.15107/rcub_dais_6886
Aminirastabi H, Xue H, Mitić VV, Lazović G, Ji G, Peng D. Novel fractal analysis of nanograin growth in BaTiO3 thin film. in Materials Chemistry and Physics. 2020;239:122261.
doi:10.1016/j.matchemphys.2019.122261
https://hdl.handle.net/21.15107/rcub_dais_6886 .
Aminirastabi, Habibollah, Xue, Hao, Mitić, Vojislav V., Lazović, Goran, Ji, Guoli, Peng, Dongliang, "Novel fractal analysis of nanograin growth in BaTiO3 thin film" in Materials Chemistry and Physics, 239 (2020):122261,
https://doi.org/10.1016/j.matchemphys.2019.122261 .,
https://hdl.handle.net/21.15107/rcub_dais_6886 .
7
6
9

Novel fractal analysis of nanograin growth in BaTiO3 thin film

Aminirastabi, Habibollah; Xue, Hao; Mitić, Vojislav V.; Lazović, Goran; Ji, Guoli; Peng, Dongliang

(Elsevier, 2020)

TY  - JOUR
AU  - Aminirastabi, Habibollah
AU  - Xue, Hao
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Ji, Guoli
AU  - Peng, Dongliang
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/6887
AB  - The grain size and the ferroelectric morphology are the two most important factors in the research and development of advanced dielectric devices. It is important to synthesize nanostructures in order to achieve optimal grain size and inhibit grain growth while controlling the sintering parameters. It is also important to find new methods to study the grain growth during densification. BaTiO3 films were successfully obtained via the sol-gel spin coating method. In this paper, we report the deposition of nanostructured BaTiO3 thin film by spin coating of sol-gel precursors. The densification, grain growth and microstructure evolution have been studied. Moreover, a novel physical and mathematical fractal analysis have been applied successfully to the densification and nano grain growth of BaTiO3 thin film. The discrepancy between the fractal dimension and the grain growth with increasing temperatures and soaking time are presented and discussed.
PB  - Elsevier
T2  - Materials Chemistry and Physics
T1  - Novel fractal analysis of nanograin growth in BaTiO3 thin film
SP  - 122261
VL  - 239
DO  - 10.1016/j.matchemphys.2019.122261
UR  - https://hdl.handle.net/21.15107/rcub_dais_6887
ER  - 
@article{
author = "Aminirastabi, Habibollah and Xue, Hao and Mitić, Vojislav V. and Lazović, Goran and Ji, Guoli and Peng, Dongliang",
year = "2020",
abstract = "The grain size and the ferroelectric morphology are the two most important factors in the research and development of advanced dielectric devices. It is important to synthesize nanostructures in order to achieve optimal grain size and inhibit grain growth while controlling the sintering parameters. It is also important to find new methods to study the grain growth during densification. BaTiO3 films were successfully obtained via the sol-gel spin coating method. In this paper, we report the deposition of nanostructured BaTiO3 thin film by spin coating of sol-gel precursors. The densification, grain growth and microstructure evolution have been studied. Moreover, a novel physical and mathematical fractal analysis have been applied successfully to the densification and nano grain growth of BaTiO3 thin film. The discrepancy between the fractal dimension and the grain growth with increasing temperatures and soaking time are presented and discussed.",
publisher = "Elsevier",
journal = "Materials Chemistry and Physics",
title = "Novel fractal analysis of nanograin growth in BaTiO3 thin film",
pages = "122261",
volume = "239",
doi = "10.1016/j.matchemphys.2019.122261",
url = "https://hdl.handle.net/21.15107/rcub_dais_6887"
}
Aminirastabi, H., Xue, H., Mitić, V. V., Lazović, G., Ji, G.,& Peng, D.. (2020). Novel fractal analysis of nanograin growth in BaTiO3 thin film. in Materials Chemistry and Physics
Elsevier., 239, 122261.
https://doi.org/10.1016/j.matchemphys.2019.122261
https://hdl.handle.net/21.15107/rcub_dais_6887
Aminirastabi H, Xue H, Mitić VV, Lazović G, Ji G, Peng D. Novel fractal analysis of nanograin growth in BaTiO3 thin film. in Materials Chemistry and Physics. 2020;239:122261.
doi:10.1016/j.matchemphys.2019.122261
https://hdl.handle.net/21.15107/rcub_dais_6887 .
Aminirastabi, Habibollah, Xue, Hao, Mitić, Vojislav V., Lazović, Goran, Ji, Guoli, Peng, Dongliang, "Novel fractal analysis of nanograin growth in BaTiO3 thin film" in Materials Chemistry and Physics, 239 (2020):122261,
https://doi.org/10.1016/j.matchemphys.2019.122261 .,
https://hdl.handle.net/21.15107/rcub_dais_6887 .
7
6
9

The Nano-Scale Modified BaTiO3 Morphology Influence on Electronic Properties and Ceramics Fractal Nature Frontiers

Mitić, Vojislav V.; Lazović, Goran; Lu, Chun-An; Paunović, Vesna; Radović, Ivana; Stajčić, Aleksandar; Vlahović, Branislav

(Basel : MDPI, 2020)

TY  - JOUR
AU  - Mitić, Vojislav V.
AU  - Lazović, Goran
AU  - Lu, Chun-An
AU  - Paunović, Vesna
AU  - Radović, Ivana
AU  - Stajčić, Aleksandar
AU  - Vlahović, Branislav
PY  - 2020
UR  - https://dais.sanu.ac.rs/123456789/8957
AB  - The BaTiO3 ceramics applications based on electronic properties have very high gradient scientific and industrial-technological interests. Our scientific research has been based on nano BaTiO3 modified with Yttrium based organometallic salt (MOD-Y). The samples have been consolidated at a sintering temperature of 1350 °C. Within the study, the new frontiers for different electronic properties between the layers of BaTiO3 grains have been introduced. The research target was grain boundary investigations and the influence on dielectric properties. After scanning electron microscopy and dielectric measurements, it has been established that modified BaTiO3 samples with larger grains showed a better compact state that led to a higher dielectric constant value. DC bias stability was also investigated and showed a connection between the grain size and capacitance stability. Analyses of functions that could approximate experimental curves were successfully employed. Practical application of fractal corrections was performed, based on surface (αs) and pore size (αp) corrections, which resulted in obtainment of the relation between the capacitance and Curie temperature. Successful introduction of fractal corrections for capacitance-Curie temperature dependence for a set of experimental data is an important step towards further miniaturization of intergranular capacitors. © 2020 by the authors.
PB  - Basel : MDPI
T2  - Applied Sciences (Switzerland)
T1  - The Nano-Scale Modified BaTiO3 Morphology Influence on Electronic Properties and Ceramics Fractal Nature Frontiers
SP  - 3485
VL  - 10
IS  - 10
DO  - 10.3390/app10103485
UR  - https://hdl.handle.net/21.15107/rcub_dais_8957
ER  - 
@article{
author = "Mitić, Vojislav V. and Lazović, Goran and Lu, Chun-An and Paunović, Vesna and Radović, Ivana and Stajčić, Aleksandar and Vlahović, Branislav",
year = "2020",
abstract = "The BaTiO3 ceramics applications based on electronic properties have very high gradient scientific and industrial-technological interests. Our scientific research has been based on nano BaTiO3 modified with Yttrium based organometallic salt (MOD-Y). The samples have been consolidated at a sintering temperature of 1350 °C. Within the study, the new frontiers for different electronic properties between the layers of BaTiO3 grains have been introduced. The research target was grain boundary investigations and the influence on dielectric properties. After scanning electron microscopy and dielectric measurements, it has been established that modified BaTiO3 samples with larger grains showed a better compact state that led to a higher dielectric constant value. DC bias stability was also investigated and showed a connection between the grain size and capacitance stability. Analyses of functions that could approximate experimental curves were successfully employed. Practical application of fractal corrections was performed, based on surface (αs) and pore size (αp) corrections, which resulted in obtainment of the relation between the capacitance and Curie temperature. Successful introduction of fractal corrections for capacitance-Curie temperature dependence for a set of experimental data is an important step towards further miniaturization of intergranular capacitors. © 2020 by the authors.",
publisher = "Basel : MDPI",
journal = "Applied Sciences (Switzerland)",
title = "The Nano-Scale Modified BaTiO3 Morphology Influence on Electronic Properties and Ceramics Fractal Nature Frontiers",
pages = "3485",
volume = "10",
number = "10",
doi = "10.3390/app10103485",
url = "https://hdl.handle.net/21.15107/rcub_dais_8957"
}
Mitić, V. V., Lazović, G., Lu, C., Paunović, V., Radović, I., Stajčić, A.,& Vlahović, B.. (2020). The Nano-Scale Modified BaTiO3 Morphology Influence on Electronic Properties and Ceramics Fractal Nature Frontiers. in Applied Sciences (Switzerland)
Basel : MDPI., 10(10), 3485.
https://doi.org/10.3390/app10103485
https://hdl.handle.net/21.15107/rcub_dais_8957
Mitić VV, Lazović G, Lu C, Paunović V, Radović I, Stajčić A, Vlahović B. The Nano-Scale Modified BaTiO3 Morphology Influence on Electronic Properties and Ceramics Fractal Nature Frontiers. in Applied Sciences (Switzerland). 2020;10(10):3485.
doi:10.3390/app10103485
https://hdl.handle.net/21.15107/rcub_dais_8957 .
Mitić, Vojislav V., Lazović, Goran, Lu, Chun-An, Paunović, Vesna, Radović, Ivana, Stajčić, Aleksandar, Vlahović, Branislav, "The Nano-Scale Modified BaTiO3 Morphology Influence on Electronic Properties and Ceramics Fractal Nature Frontiers" in Applied Sciences (Switzerland), 10, no. 10 (2020):3485,
https://doi.org/10.3390/app10103485 .,
https://hdl.handle.net/21.15107/rcub_dais_8957 .
2
1
2

Evaluation of nano grain growth of TiO2 fibers fabricated via centrifugal jet spinning

Aminirastabi, Habibollah; Weng, Zhangzhao; Xue, Hao; Yu, Yuxi; Ji, Guoli; Mitić, Vojislav V.; Guan, Rengang

(Elsevier, 2020)

TY  - JOUR
AU  - Aminirastabi, Habibollah
AU  - Weng, Zhangzhao
AU  - Xue, Hao
AU  - Yu, Yuxi
AU  - Ji, Guoli
AU  - Mitić, Vojislav V.
AU  - Guan, Rengang
PY  - 2020
UR  - http://www.sciencedirect.com/science/article/pii/S2352507X19303361
UR  - https://dais.sanu.ac.rs/123456789/6917
AB  - Nanomaterials form the main thrust for modern day technological and industrial applications, including but not limited to, super-capacitors, membranes, batteries, filters, sensors, tissue engineering, wound dressing, protecting vesture, reinforcement in composite materials, etc. Ceramic nanofibers are at the forefront of these materials due to their high surface area and tunable nano structures and porosity. However, obtaining nanofibers with a well-developed uniform crystallinity and a perfect morphology is a challenging task. Among various techniques utilized for preparation of nanofibers centrifugal jet spinning covets merits due to its high efficiency production rate, cost adequacy and operational safety. In the present manuscript we report preparation of TiO2 nanofibers by Sol–Gel Course with Centrifugal Jet Spinning using tetrabutyl titanate as main organic titanium precursor. Herein we demonstrate that a well-developed crystallinity and a perfect morphology of TiO2, from Nano to micro-scales, can be achieved after decomposition of polymer and removal of carbon. Effect of various factors such as PVP content, speed of rotation, humidity and heat treatment on the fiber growth was investigated. Effect of variation in soaking time and different temperatures on the TiO2 nanofiber grain growth was also investigated. Phase structure of TiO2 nanofibers was characterized by X-ray diffraction (XRD). Microstructure of the nanofibers was analyzed using Scanning Electron Microscopic (SEM) studies and Transmission Electron Microscope (TEM) studies. Kinetic exponents of grain growth were likewise acquired by with the help of an image processing software. Outcomes of our investigations show that crystallinity and morphology of grains of fibers are highly sensitive to temperature and soaking time. Image analysis demonstrates that sintering temperature greatly affects the crystallinity and grain size of the nanofibers over 700 °C.
PB  - Elsevier
T2  - Nano-Structures & Nano-Objects
T1  - Evaluation of nano grain growth of TiO2 fibers fabricated via centrifugal jet spinning
SP  - 100413
VL  - 21
DO  - 10.1016/j.nanoso.2019.100413
UR  - https://hdl.handle.net/21.15107/rcub_dais_6917
ER  - 
@article{
author = "Aminirastabi, Habibollah and Weng, Zhangzhao and Xue, Hao and Yu, Yuxi and Ji, Guoli and Mitić, Vojislav V. and Guan, Rengang",
year = "2020",
abstract = "Nanomaterials form the main thrust for modern day technological and industrial applications, including but not limited to, super-capacitors, membranes, batteries, filters, sensors, tissue engineering, wound dressing, protecting vesture, reinforcement in composite materials, etc. Ceramic nanofibers are at the forefront of these materials due to their high surface area and tunable nano structures and porosity. However, obtaining nanofibers with a well-developed uniform crystallinity and a perfect morphology is a challenging task. Among various techniques utilized for preparation of nanofibers centrifugal jet spinning covets merits due to its high efficiency production rate, cost adequacy and operational safety. In the present manuscript we report preparation of TiO2 nanofibers by Sol–Gel Course with Centrifugal Jet Spinning using tetrabutyl titanate as main organic titanium precursor. Herein we demonstrate that a well-developed crystallinity and a perfect morphology of TiO2, from Nano to micro-scales, can be achieved after decomposition of polymer and removal of carbon. Effect of various factors such as PVP content, speed of rotation, humidity and heat treatment on the fiber growth was investigated. Effect of variation in soaking time and different temperatures on the TiO2 nanofiber grain growth was also investigated. Phase structure of TiO2 nanofibers was characterized by X-ray diffraction (XRD). Microstructure of the nanofibers was analyzed using Scanning Electron Microscopic (SEM) studies and Transmission Electron Microscope (TEM) studies. Kinetic exponents of grain growth were likewise acquired by with the help of an image processing software. Outcomes of our investigations show that crystallinity and morphology of grains of fibers are highly sensitive to temperature and soaking time. Image analysis demonstrates that sintering temperature greatly affects the crystallinity and grain size of the nanofibers over 700 °C.",
publisher = "Elsevier",
journal = "Nano-Structures & Nano-Objects",
title = "Evaluation of nano grain growth of TiO2 fibers fabricated via centrifugal jet spinning",
pages = "100413",
volume = "21",
doi = "10.1016/j.nanoso.2019.100413",
url = "https://hdl.handle.net/21.15107/rcub_dais_6917"
}
Aminirastabi, H., Weng, Z., Xue, H., Yu, Y., Ji, G., Mitić, V. V.,& Guan, R.. (2020). Evaluation of nano grain growth of TiO2 fibers fabricated via centrifugal jet spinning. in Nano-Structures & Nano-Objects
Elsevier., 21, 100413.
https://doi.org/10.1016/j.nanoso.2019.100413
https://hdl.handle.net/21.15107/rcub_dais_6917
Aminirastabi H, Weng Z, Xue H, Yu Y, Ji G, Mitić VV, Guan R. Evaluation of nano grain growth of TiO2 fibers fabricated via centrifugal jet spinning. in Nano-Structures & Nano-Objects. 2020;21:100413.
doi:10.1016/j.nanoso.2019.100413
https://hdl.handle.net/21.15107/rcub_dais_6917 .
Aminirastabi, Habibollah, Weng, Zhangzhao, Xue, Hao, Yu, Yuxi, Ji, Guoli, Mitić, Vojislav V., Guan, Rengang, "Evaluation of nano grain growth of TiO2 fibers fabricated via centrifugal jet spinning" in Nano-Structures & Nano-Objects, 21 (2020):100413,
https://doi.org/10.1016/j.nanoso.2019.100413 .,
https://hdl.handle.net/21.15107/rcub_dais_6917 .
4
3

Modeling the thermal and electrical conductivity relation of synthesized diamonds within fractal nature analysis

Mitić, Vojislav V.; Veljković, Vlada B.; Lazović, Goran; Mohr, Marcus; Gluche, Peter; Paunović, Vesna; Fecht, Hans-Jörg

(Societa ceramica italiana, 2019)

TY  - CONF
AU  - Mitić, Vojislav V.
AU  - Veljković, Vlada B.
AU  - Lazović, Goran
AU  - Mohr, Marcus
AU  - Gluche, Peter
AU  - Paunović, Vesna
AU  - Fecht, Hans-Jörg
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/7024
AB  - Improvement of novel materials could be very good development base for enhancement of new technologies. One of the most promising material of modern science is undoubtedly synthesized diamond. Because of variety of modern applications, the research in this area is becoming intensive. Utilization of this material made great step forward in many areas, beside the most known jewelry, also in producing microcomponents, in medical-surgery, as well as in high professional industry. These and others specific application of polycrystal diamonds, require permanently research and improvement of their properties. Although, the first synthesized diamond was created half a century ago using high pressure - high temperature (HPHT) method, diamonds created by chemical vapor deposition (CVD) method were much more convenient for application in so many areas. By applying CVD method, microcrystalline diamond (MCD) with grain size approximately 100 nm were created. Due to some disadvantages of MCD films, like values of hardness and Young’s modulus, new nanocrystalline (NCD) and ultra-nanocrystalline (UNCD) diamond materials were developed, with average grains size of 5-100 nm and 3-5 nm, respectively. The properties of polycrystalline diamonds can vary depending on the consolidation process like composition and pressure of applied gases, filament setup and reactor geometry. In that sense, changing the parameters of consolidation process, there is a possibility to change the microstructure of thin films and understanding its fundamentals. Also, fractal nature analysis could contribute to the revealing possibilities for improvement of polycrystalline diamond films. During carried out experiments, it was observed that there is the influence of grain size on thermal and electrical conductivity - when the thermal conductivity is increasing then electro conductivity is decreasing and opposite. Relation between the structures and final properties of synthetized diamonds can be achieved by explaining these phenomena based on fractal nature.
PB  - Societa ceramica italiana
PB  - Politecnico di Torino
C3  - Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019
T1  - Modeling the thermal and electrical conductivity relation of synthesized diamonds within fractal nature analysis
SP  - 672
EP  - 672
UR  - https://hdl.handle.net/21.15107/rcub_dais_7024
ER  - 
@conference{
author = "Mitić, Vojislav V. and Veljković, Vlada B. and Lazović, Goran and Mohr, Marcus and Gluche, Peter and Paunović, Vesna and Fecht, Hans-Jörg",
year = "2019",
abstract = "Improvement of novel materials could be very good development base for enhancement of new technologies. One of the most promising material of modern science is undoubtedly synthesized diamond. Because of variety of modern applications, the research in this area is becoming intensive. Utilization of this material made great step forward in many areas, beside the most known jewelry, also in producing microcomponents, in medical-surgery, as well as in high professional industry. These and others specific application of polycrystal diamonds, require permanently research and improvement of their properties. Although, the first synthesized diamond was created half a century ago using high pressure - high temperature (HPHT) method, diamonds created by chemical vapor deposition (CVD) method were much more convenient for application in so many areas. By applying CVD method, microcrystalline diamond (MCD) with grain size approximately 100 nm were created. Due to some disadvantages of MCD films, like values of hardness and Young’s modulus, new nanocrystalline (NCD) and ultra-nanocrystalline (UNCD) diamond materials were developed, with average grains size of 5-100 nm and 3-5 nm, respectively. The properties of polycrystalline diamonds can vary depending on the consolidation process like composition and pressure of applied gases, filament setup and reactor geometry. In that sense, changing the parameters of consolidation process, there is a possibility to change the microstructure of thin films and understanding its fundamentals. Also, fractal nature analysis could contribute to the revealing possibilities for improvement of polycrystalline diamond films. During carried out experiments, it was observed that there is the influence of grain size on thermal and electrical conductivity - when the thermal conductivity is increasing then electro conductivity is decreasing and opposite. Relation between the structures and final properties of synthetized diamonds can be achieved by explaining these phenomena based on fractal nature.",
publisher = "Societa ceramica italiana, Politecnico di Torino",
journal = "Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019",
title = "Modeling the thermal and electrical conductivity relation of synthesized diamonds within fractal nature analysis",
pages = "672-672",
url = "https://hdl.handle.net/21.15107/rcub_dais_7024"
}
Mitić, V. V., Veljković, V. B., Lazović, G., Mohr, M., Gluche, P., Paunović, V.,& Fecht, H.. (2019). Modeling the thermal and electrical conductivity relation of synthesized diamonds within fractal nature analysis. in Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019
Societa ceramica italiana., 672-672.
https://hdl.handle.net/21.15107/rcub_dais_7024
Mitić VV, Veljković VB, Lazović G, Mohr M, Gluche P, Paunović V, Fecht H. Modeling the thermal and electrical conductivity relation of synthesized diamonds within fractal nature analysis. in Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019. 2019;:672-672.
https://hdl.handle.net/21.15107/rcub_dais_7024 .
Mitić, Vojislav V., Veljković, Vlada B., Lazović, Goran, Mohr, Marcus, Gluche, Peter, Paunović, Vesna, Fecht, Hans-Jörg, "Modeling the thermal and electrical conductivity relation of synthesized diamonds within fractal nature analysis" in Abstract Book / XVI Conference and Exhibition of the European Ceramic Society XVI ECerS Conference, Torino, 16-20 June 2019 (2019):672-672,
https://hdl.handle.net/21.15107/rcub_dais_7024 .