Veselinović, Ljiljana

Link to this page

Authority KeyName Variants
orcid::0000-0002-6100-9178
  • Veselinović, Ljiljana (115)
  • Kandić, Ljiljana (3)
Projects
Molecular designing of nanoparticles with controlled morphological and physicochemical characteristics and functional materials based on them Sinteza funkcionalnih materijala sa kontrolisanom strukturom na molekularnom i nano nivou
Nanostructured Functional and Composite Materials in Catalytic and Sorption Processes Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200175 (Institute of Technical Sciences of SASA, Belgrade)
Development, characterization and application nanostructured and composite electrocatalysts and interactive supports for fuel cells and water electrolysis Synthesis, processing and applications of nanostructured multifunctional materials with defined properties
Ministry of Science of Montenegro, Project no. 01-2383/2 United States National Institutes of Health (NIH) / National Institute of Dental and Craniofacial Research (NIDCR), Grant K99-DE021416
Bilateral collaboration between Serbia and Slovenia (BI-RS/16-17-039) European Science Foundation COST Action CA15114
Microbial diversity study and characterization of beneficial environmental microorganisms Advanced technologies for monitoring and environmental protection from chemical pollutants and radiation burden
Magnetic and radionuclide labeled nanostructured materials for medical applications Italian Ministry of Foreign Affairs and International Cooperation (MAECI) within the collaboration framework between Italy and the Republic of Serbia (project PGR02952, call “Grande Rilevanza”)
Sabanci University Nanotechnology Research and Application Center (SUNUM) starter through JECS Trust Slovenian Research Agency: Program P1-02456
Bilateral cooperation program between the Republic of Serbia and the Republic of Slovenia “Nanostructured and mesoporous functional materials with enhanced solar light driven photocatalytic activity” for 2018–2019 Rational design and synthesis of biologically active and coordination compounds and functional materials, relevant for (bio)nanotechnology
New approach in designing materials for energy conversion and energy storage systems Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200017 (University of Belgrade, Institute of Nuclear Sciences 'Vinča', Belgrade-Vinča)
Nanostructured multifunctional materials and nanocomposites Serbian Academy of Sciences and Arts, Project F-141
Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200146 (University of Belgrade, Faculty of Physical Chemistry) Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 451-03-68/2020-14/200325 (Military Technical Institute - MTI, Belgrade)

Author's Bibliography

Sonochemical synthesis of optically active fluorides

Vuković, Marina; Dinić, Ivana; Jardim, Paula M.; Marković, Smilja; Veselinović, Ljiljana; Nikolić, Marko G.; Mančić, Lidija

(Belgrade : Institute of Technical Sciences of SASA, 2021)

TY  - CONF
AU  - Vuković, Marina
AU  - Dinić, Ivana
AU  - Jardim, Paula M.
AU  - Marković, Smilja
AU  - Veselinović, Ljiljana
AU  - Nikolić, Marko G.
AU  - Mančić, Lidija
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11915
AB  - Up-conversion is the optical property of materials which have ability to convert low energy photons (usually from infrared spectrum) into higher energy photons (from visible spectrum). Such compounds, usually lanthanide doped oxides or fluorides, have many applications in photoluminescence science and technology today. Currently, (β) NaYF4:Yb,Er polymorph is considered to be the most efficient up-converting material. Its synthesis usually includes the usage of toxic solvents, long-term heating, high pressures, controlled gas atmosphere, etc. The aim of this work was to utilize rarely applied sonochemical synthesis for the stabilization of (β) NaYF4:Yb,Er phase under mild and environmental friendly conditions. For this purpose, we performed ultrasonic treatment of common nitrate precursors and sodium fluorine for a different time. The obtained powders were analyzed in order to determine their phase composition and thermal stability, morphology, dopants distribution, particles surface purity and luminescent characteristics. Owing to this, the chemical and crystal phase transformations that occurred  in specified periods of synthesis time are explained in detail. Moreover, it was shown that obtaining of uniformly doped (β) NaYF4:Yb,Er mosocrystalline particles is possible after 2h of sonication.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
T1  - Sonochemical synthesis of optically active fluorides
SP  - 33
EP  - 33
UR  - https://hdl.handle.net/21.15107/rcub_dais_11915
ER  - 
@conference{
author = "Vuković, Marina and Dinić, Ivana and Jardim, Paula M. and Marković, Smilja and Veselinović, Ljiljana and Nikolić, Marko G. and Mančić, Lidija",
year = "2021",
abstract = "Up-conversion is the optical property of materials which have ability to convert low energy photons (usually from infrared spectrum) into higher energy photons (from visible spectrum). Such compounds, usually lanthanide doped oxides or fluorides, have many applications in photoluminescence science and technology today. Currently, (β) NaYF4:Yb,Er polymorph is considered to be the most efficient up-converting material. Its synthesis usually includes the usage of toxic solvents, long-term heating, high pressures, controlled gas atmosphere, etc. The aim of this work was to utilize rarely applied sonochemical synthesis for the stabilization of (β) NaYF4:Yb,Er phase under mild and environmental friendly conditions. For this purpose, we performed ultrasonic treatment of common nitrate precursors and sodium fluorine for a different time. The obtained powders were analyzed in order to determine their phase composition and thermal stability, morphology, dopants distribution, particles surface purity and luminescent characteristics. Owing to this, the chemical and crystal phase transformations that occurred  in specified periods of synthesis time are explained in detail. Moreover, it was shown that obtaining of uniformly doped (β) NaYF4:Yb,Er mosocrystalline particles is possible after 2h of sonication.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021",
title = "Sonochemical synthesis of optically active fluorides",
pages = "33-33",
url = "https://hdl.handle.net/21.15107/rcub_dais_11915"
}
Vuković, M., Dinić, I., Jardim, P. M., Marković, S., Veselinović, L., Nikolić, M. G.,& Mančić, L.. (2021). Sonochemical synthesis of optically active fluorides. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
Belgrade : Institute of Technical Sciences of SASA., 33-33.
https://hdl.handle.net/21.15107/rcub_dais_11915
Vuković M, Dinić I, Jardim PM, Marković S, Veselinović L, Nikolić MG, Mančić L. Sonochemical synthesis of optically active fluorides. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021. 2021;:33-33.
https://hdl.handle.net/21.15107/rcub_dais_11915 .
Vuković, Marina, Dinić, Ivana, Jardim, Paula M., Marković, Smilja, Veselinović, Ljiljana, Nikolić, Marko G., Mančić, Lidija, "Sonochemical synthesis of optically active fluorides" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021 (2021):33-33,
https://hdl.handle.net/21.15107/rcub_dais_11915 .

CaCu3Ti4-xRuxO12: Crystal structure, electrical and magnetic properties

Veselinović, Ljiljana; Mitrić, Miodrag; Mančić, Lidija; Jardim, Paula M.

(Belgrade : Institute of Technical Sciences of SASA, 2021)

TY  - CONF
AU  - Veselinović, Ljiljana
AU  - Mitrić, Miodrag
AU  - Mančić, Lidija
AU  - Jardim, Paula M.
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11914
AB  - The CaCu3Ti4O12 belongs to the large ACu3B4O12 family of materials. Crystallographic A site is most often occupied by alkaline-earth metals or lanthanides, while B site is occupied by transition metals. The type of cations that build up the structure strongly affects the properties of these. The CaCu3Ti4O12 has been extensively studied due to its high dielectric permittivity stable over a wide temperature and frequency range (up to 105, for 100-600 K and 102–105 Hz). Because of such characteristics, it has promising application in microelectronics. However, it has been shown that differences in the crystal structure and electrical properties of dielectric ceramics and metallic electrodes, may cause an energy barrier and occurrence of stress on the ceramic-electrode contact which reduces dielectric permittivity. Such stress can be prevented by using dielectric and electrode materials with as much as possible similar crystal structure, especially unit cell parameters. This investigation dealt with detailed structural (XRPD, HRTEM, SAED), dielectric and magnetic study of CaCu3Ti4-xRuxO12 (CCTRO, x = 0, 1 and 4) materials. The results of structural refinement show that in cubic symmetry with space group Im3 , both titanium and ruthenium ions occupied crystallographic B site. Moreover, the variation in stoichiometry slightly affects the value of the unit cell parameters but changes electrical properties of studied material. Thus, substitution of even one atom of Ru in CaCu3Ti4-xRuxO12 unit cell is enough to change material properties from dielectric to conductor solving the problem of stress appearance on the contact layer of dielectric/electrode in capacitors.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
T1  - CaCu3Ti4-xRuxO12: Crystal structure, electrical and magnetic properties
SP  - 32
EP  - 32
UR  - https://hdl.handle.net/21.15107/rcub_dais_11914
ER  - 
@conference{
author = "Veselinović, Ljiljana and Mitrić, Miodrag and Mančić, Lidija and Jardim, Paula M.",
year = "2021",
abstract = "The CaCu3Ti4O12 belongs to the large ACu3B4O12 family of materials. Crystallographic A site is most often occupied by alkaline-earth metals or lanthanides, while B site is occupied by transition metals. The type of cations that build up the structure strongly affects the properties of these. The CaCu3Ti4O12 has been extensively studied due to its high dielectric permittivity stable over a wide temperature and frequency range (up to 105, for 100-600 K and 102–105 Hz). Because of such characteristics, it has promising application in microelectronics. However, it has been shown that differences in the crystal structure and electrical properties of dielectric ceramics and metallic electrodes, may cause an energy barrier and occurrence of stress on the ceramic-electrode contact which reduces dielectric permittivity. Such stress can be prevented by using dielectric and electrode materials with as much as possible similar crystal structure, especially unit cell parameters. This investigation dealt with detailed structural (XRPD, HRTEM, SAED), dielectric and magnetic study of CaCu3Ti4-xRuxO12 (CCTRO, x = 0, 1 and 4) materials. The results of structural refinement show that in cubic symmetry with space group Im3 , both titanium and ruthenium ions occupied crystallographic B site. Moreover, the variation in stoichiometry slightly affects the value of the unit cell parameters but changes electrical properties of studied material. Thus, substitution of even one atom of Ru in CaCu3Ti4-xRuxO12 unit cell is enough to change material properties from dielectric to conductor solving the problem of stress appearance on the contact layer of dielectric/electrode in capacitors.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021",
title = "CaCu3Ti4-xRuxO12: Crystal structure, electrical and magnetic properties",
pages = "32-32",
url = "https://hdl.handle.net/21.15107/rcub_dais_11914"
}
Veselinović, L., Mitrić, M., Mančić, L.,& Jardim, P. M.. (2021). CaCu3Ti4-xRuxO12: Crystal structure, electrical and magnetic properties. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
Belgrade : Institute of Technical Sciences of SASA., 32-32.
https://hdl.handle.net/21.15107/rcub_dais_11914
Veselinović L, Mitrić M, Mančić L, Jardim PM. CaCu3Ti4-xRuxO12: Crystal structure, electrical and magnetic properties. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021. 2021;:32-32.
https://hdl.handle.net/21.15107/rcub_dais_11914 .
Veselinović, Ljiljana, Mitrić, Miodrag, Mančić, Lidija, Jardim, Paula M., "CaCu3Ti4-xRuxO12: Crystal structure, electrical and magnetic properties" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021 (2021):32-32,
https://hdl.handle.net/21.15107/rcub_dais_11914 .

Synthesis and characterization of ZnO nano/micro crystals with enhanced sunlight-induced photo-catalytic activity

Stanković, Ana; Veselinović, Ljiljana; Škapin, Srečo Davor; Marković, Smilja

(Belgrade : Serbian Ceramic Society, 2021)

TY  - CONF
AU  - Stanković, Ana
AU  - Veselinović, Ljiljana
AU  - Škapin, Srečo Davor
AU  - Marković, Smilja
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/11911
AB  - It is known that the functional properties of zinc oxide (ZnO) materials depend on their physico-chemical properties, such as optical properties and specific surface area. They are defined with structural characteristics, for example: the particle size and morphology, phase composition, crystallite size, crystallinity degree, as well as the crystal structure ordering, i.e., the presence of structural defects. The primary purpose of this study was to synthesize ZnO powders with various physico-chemical properties by optimizing the reaction conditions in different processing methods. For example, reaction temperature or addition of various surfactants such as polyvinyl alcohol, polyvinyl pyrrolidone, or polyethylene oxide. In this study, to vary physico-chemical properties of ZnO particles, four different synthesis methods were employed: mechanochemical, hydrothermal, ultrasonic and microwave processing. Structural and morphological properties of prepared ZnO powders were characterized using a number of techniques such as: X-ray powder diffraction (XRPD), Raman and Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), UV-Vis diffuse reflectance and photoluminescence (PL) spectroscopy. One of the functional properties of the synthesized ZnO powders that was particularly examined is photocatalytic activity. In order to examine ZnO as a photocatalyst, photodegradation of methylene blue (MB) dye was carried out under simulated and direct sunlight irradiation. The UV–Vis spectra showed that the modification of the particle size and morphology from nanospheres to micro-rods resulted in increased absorption, and a slight red-shift of the absorption edge. Besides, the band gap energy of the synthesized ZnO micro and nanocrystals showed the red shift compared to bulk ZnO. According to the results of a Raman spectroscopy, the enhanced visible light absorption of the ZnO micro and nanocrystals is related to two phenomena: the existence of lattice defects (oxygen vacancies and zinc interstitials), and the particle surface sensitization by different surfactants.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
T1  - Synthesis and characterization of ZnO nano/micro crystals with enhanced sunlight-induced photo-catalytic activity
SP  - 36
EP  - 36
UR  - https://hdl.handle.net/21.15107/rcub_dais_11911
ER  - 
@conference{
author = "Stanković, Ana and Veselinović, Ljiljana and Škapin, Srečo Davor and Marković, Smilja",
year = "2021",
abstract = "It is known that the functional properties of zinc oxide (ZnO) materials depend on their physico-chemical properties, such as optical properties and specific surface area. They are defined with structural characteristics, for example: the particle size and morphology, phase composition, crystallite size, crystallinity degree, as well as the crystal structure ordering, i.e., the presence of structural defects. The primary purpose of this study was to synthesize ZnO powders with various physico-chemical properties by optimizing the reaction conditions in different processing methods. For example, reaction temperature or addition of various surfactants such as polyvinyl alcohol, polyvinyl pyrrolidone, or polyethylene oxide. In this study, to vary physico-chemical properties of ZnO particles, four different synthesis methods were employed: mechanochemical, hydrothermal, ultrasonic and microwave processing. Structural and morphological properties of prepared ZnO powders were characterized using a number of techniques such as: X-ray powder diffraction (XRPD), Raman and Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), UV-Vis diffuse reflectance and photoluminescence (PL) spectroscopy. One of the functional properties of the synthesized ZnO powders that was particularly examined is photocatalytic activity. In order to examine ZnO as a photocatalyst, photodegradation of methylene blue (MB) dye was carried out under simulated and direct sunlight irradiation. The UV–Vis spectra showed that the modification of the particle size and morphology from nanospheres to micro-rods resulted in increased absorption, and a slight red-shift of the absorption edge. Besides, the band gap energy of the synthesized ZnO micro and nanocrystals showed the red shift compared to bulk ZnO. According to the results of a Raman spectroscopy, the enhanced visible light absorption of the ZnO micro and nanocrystals is related to two phenomena: the existence of lattice defects (oxygen vacancies and zinc interstitials), and the particle surface sensitization by different surfactants.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021",
title = "Synthesis and characterization of ZnO nano/micro crystals with enhanced sunlight-induced photo-catalytic activity",
pages = "36-36",
url = "https://hdl.handle.net/21.15107/rcub_dais_11911"
}
Stanković, A., Veselinović, L., Škapin, S. D.,& Marković, S.. (2021). Synthesis and characterization of ZnO nano/micro crystals with enhanced sunlight-induced photo-catalytic activity. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021
Belgrade : Serbian Ceramic Society., 36-36.
https://hdl.handle.net/21.15107/rcub_dais_11911
Stanković A, Veselinović L, Škapin SD, Marković S. Synthesis and characterization of ZnO nano/micro crystals with enhanced sunlight-induced photo-catalytic activity. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021. 2021;:36-36.
https://hdl.handle.net/21.15107/rcub_dais_11911 .
Stanković, Ana, Veselinović, Ljiljana, Škapin, Srečo Davor, Marković, Smilja, "Synthesis and characterization of ZnO nano/micro crystals with enhanced sunlight-induced photo-catalytic activity" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application IX : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 20-21. September 2021 (2021):36-36,
https://hdl.handle.net/21.15107/rcub_dais_11911 .

Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry

Rajić, Vladimir; Stojković Simatović, Ivana; Veselinović, Ljiljana; Belošević Čavor, Jelena; Novaković, Mirjana; Popović, Maja; Škapin, Srečo Davor; Mojović, Miloš; Stojadinović, Stevan; Rac, Vladislav; Janković Častvan, Ivona; Marković, Smilja

(Royal Society of Chemistry, 2020)

TY  - JOUR
AU  - Rajić, Vladimir
AU  - Stojković Simatović, Ivana
AU  - Veselinović, Ljiljana
AU  - Belošević Čavor, Jelena
AU  - Novaković, Mirjana
AU  - Popović, Maja
AU  - Škapin, Srečo Davor
AU  - Mojović, Miloš
AU  - Stojadinović, Stevan
AU  - Rac, Vladislav
AU  - Janković Častvan, Ivona
AU  - Marković, Smilja
PY  - 2020
UR  - https://pubs.rsc.org/en/content/articlelanding/2020/cp/d0cp03377d
UR  - https://dais.sanu.ac.rs/123456789/9544
AB  - Eco-friendly and rapid microwave processing of a precipitate was used to produce Fe-doped zinc oxide (Zn1−xFexO, x = 0, 0.05, 0.1, 0.15 and 0.20; ZnO:Fe) nanoparticles, which were tested as catalysts toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in a moderately alkaline solution. The phase composition, crystal structure, morphology, textural properties, surface chemistry, optical properties and band structure were examined to comprehend the influence of Zn2+ partial substitution with Fe3+ on the catalytic activity of ZnO:Fe. Linear sweep voltammetry showed an improved catalytic activity of ZnO:5Fe toward the ORR, compared to pure ZnO, while with increased amounts of the Fe-dopant the activity decreased. The improvement was suggested by a more positive onset potential (0.394 V vs. RHE), current density (0.231 mA cm−2 at 0.150 V vs. RHE), and faster kinetics (Tafel slope, b = 248 mV dec−1), and it may be due to the synergistic effect of (1) a sufficient amount of surface oxygen vacancies, and (2) a certain amount of plate-like particles composed of crystallites with well developed (0001) and (000) facets. Quite the contrary, the OER study showed that the introduction of Fe3+ ions into the ZnO crystal structure resulted in enhanced catalytic activity of all ZnO:Fe samples, compared to pure ZnO, probably due to the modified binding energy and an optimized band structure. With the maximal current density of 1.066 mA cm−2 at 2.216 V vs. RHE, an onset potential of 1.856 V vs. RHE, and the smallest potential difference between the OER and ORR (ΔE = 1.58 V), ZnO:10Fe may be considered a promising bifunctional catalyst toward the OER/ORR in moderately alkaline solution. This study demonstrates that the electrocatalytic activity of ZnO:Fe strongly depends on the defect chemistry and consequently the band structure. Along with providing fundamental insight into the electrocatalytic activity of ZnO:Fe, the study also indicates an optimal stoichiometry for enhanced bifunctional activity toward the OER/ORR, compared to pure ZnO.
PB  - Royal Society of Chemistry
T2  - Physical Chemistry Chemical Physics
T1  - Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry
SP  - 22078
EP  - 22095
VL  - 22
IS  - 38
DO  - 10.1039/D0CP03377D
UR  - https://hdl.handle.net/21.15107/rcub_dais_9544
ER  - 
@article{
author = "Rajić, Vladimir and Stojković Simatović, Ivana and Veselinović, Ljiljana and Belošević Čavor, Jelena and Novaković, Mirjana and Popović, Maja and Škapin, Srečo Davor and Mojović, Miloš and Stojadinović, Stevan and Rac, Vladislav and Janković Častvan, Ivona and Marković, Smilja",
year = "2020",
abstract = "Eco-friendly and rapid microwave processing of a precipitate was used to produce Fe-doped zinc oxide (Zn1−xFexO, x = 0, 0.05, 0.1, 0.15 and 0.20; ZnO:Fe) nanoparticles, which were tested as catalysts toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in a moderately alkaline solution. The phase composition, crystal structure, morphology, textural properties, surface chemistry, optical properties and band structure were examined to comprehend the influence of Zn2+ partial substitution with Fe3+ on the catalytic activity of ZnO:Fe. Linear sweep voltammetry showed an improved catalytic activity of ZnO:5Fe toward the ORR, compared to pure ZnO, while with increased amounts of the Fe-dopant the activity decreased. The improvement was suggested by a more positive onset potential (0.394 V vs. RHE), current density (0.231 mA cm−2 at 0.150 V vs. RHE), and faster kinetics (Tafel slope, b = 248 mV dec−1), and it may be due to the synergistic effect of (1) a sufficient amount of surface oxygen vacancies, and (2) a certain amount of plate-like particles composed of crystallites with well developed (0001) and (000) facets. Quite the contrary, the OER study showed that the introduction of Fe3+ ions into the ZnO crystal structure resulted in enhanced catalytic activity of all ZnO:Fe samples, compared to pure ZnO, probably due to the modified binding energy and an optimized band structure. With the maximal current density of 1.066 mA cm−2 at 2.216 V vs. RHE, an onset potential of 1.856 V vs. RHE, and the smallest potential difference between the OER and ORR (ΔE = 1.58 V), ZnO:10Fe may be considered a promising bifunctional catalyst toward the OER/ORR in moderately alkaline solution. This study demonstrates that the electrocatalytic activity of ZnO:Fe strongly depends on the defect chemistry and consequently the band structure. Along with providing fundamental insight into the electrocatalytic activity of ZnO:Fe, the study also indicates an optimal stoichiometry for enhanced bifunctional activity toward the OER/ORR, compared to pure ZnO.",
publisher = "Royal Society of Chemistry",
journal = "Physical Chemistry Chemical Physics",
title = "Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry",
pages = "22078-22095",
volume = "22",
number = "38",
doi = "10.1039/D0CP03377D",
url = "https://hdl.handle.net/21.15107/rcub_dais_9544"
}
Rajić, V., Stojković Simatović, I., Veselinović, L., Belošević Čavor, J., Novaković, M., Popović, M., Škapin, S. D., Mojović, M., Stojadinović, S., Rac, V., Janković Častvan, I.,& Marković, S.. (2020). Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry. in Physical Chemistry Chemical Physics
Royal Society of Chemistry., 22(38), 22078-22095.
https://doi.org/10.1039/D0CP03377D
https://hdl.handle.net/21.15107/rcub_dais_9544
Rajić V, Stojković Simatović I, Veselinović L, Belošević Čavor J, Novaković M, Popović M, Škapin SD, Mojović M, Stojadinović S, Rac V, Janković Častvan I, Marković S. Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry. in Physical Chemistry Chemical Physics. 2020;22(38):22078-22095.
doi:10.1039/D0CP03377D
https://hdl.handle.net/21.15107/rcub_dais_9544 .
Rajić, Vladimir, Stojković Simatović, Ivana, Veselinović, Ljiljana, Belošević Čavor, Jelena, Novaković, Mirjana, Popović, Maja, Škapin, Srečo Davor, Mojović, Miloš, Stojadinović, Stevan, Rac, Vladislav, Janković Častvan, Ivona, Marković, Smilja, "Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry" in Physical Chemistry Chemical Physics, 22, no. 38 (2020):22078-22095,
https://doi.org/10.1039/D0CP03377D .,
https://hdl.handle.net/21.15107/rcub_dais_9544 .
1
1

Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry

Rajić, Vladimir; Stojković Simatović, Ivana; Veselinović, Ljiljana; Belošević Čavor, Jelena; Novaković, Mirjana; Popović, Maja; Škapin, Srečo Davor; Mojović, Miloš; Stojadinović, Stevan; Rac, Vladislav; Janković Častvan, Ivona; Marković, Smilja

(Royal Society of Chemistry, 2020)

TY  - JOUR
AU  - Rajić, Vladimir
AU  - Stojković Simatović, Ivana
AU  - Veselinović, Ljiljana
AU  - Belošević Čavor, Jelena
AU  - Novaković, Mirjana
AU  - Popović, Maja
AU  - Škapin, Srečo Davor
AU  - Mojović, Miloš
AU  - Stojadinović, Stevan
AU  - Rac, Vladislav
AU  - Janković Častvan, Ivona
AU  - Marković, Smilja
PY  - 2020
UR  - https://pubs.rsc.org/en/content/articlelanding/2020/cp/d0cp03377d
UR  - https://dais.sanu.ac.rs/123456789/9543
AB  - Eco-friendly and rapid microwave processing of a precipitate was used to produce Fe-doped zinc oxide (Zn1−xFexO, x = 0, 0.05, 0.1, 0.15 and 0.20; ZnO:Fe) nanoparticles, which were tested as catalysts toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in a moderately alkaline solution. The phase composition, crystal structure, morphology, textural properties, surface chemistry, optical properties and band structure were examined to comprehend the influence of Zn2+ partial substitution with Fe3+ on the catalytic activity of ZnO:Fe. Linear sweep voltammetry showed an improved catalytic activity of ZnO:5Fe toward the ORR, compared to pure ZnO, while with increased amounts of the Fe-dopant the activity decreased. The improvement was suggested by a more positive onset potential (0.394 V vs. RHE), current density (0.231 mA cm−2 at 0.150 V vs. RHE), and faster kinetics (Tafel slope, b = 248 mV dec−1), and it may be due to the synergistic effect of (1) a sufficient amount of surface oxygen vacancies, and (2) a certain amount of plate-like particles composed of crystallites with well developed (0001) and (000) facets. Quite the contrary, the OER study showed that the introduction of Fe3+ ions into the ZnO crystal structure resulted in enhanced catalytic activity of all ZnO:Fe samples, compared to pure ZnO, probably due to the modified binding energy and an optimized band structure. With the maximal current density of 1.066 mA cm−2 at 2.216 V vs. RHE, an onset potential of 1.856 V vs. RHE, and the smallest potential difference between the OER and ORR (ΔE = 1.58 V), ZnO:10Fe may be considered a promising bifunctional catalyst toward the OER/ORR in moderately alkaline solution. This study demonstrates that the electrocatalytic activity of ZnO:Fe strongly depends on the defect chemistry and consequently the band structure. Along with providing fundamental insight into the electrocatalytic activity of ZnO:Fe, the study also indicates an optimal stoichiometry for enhanced bifunctional activity toward the OER/ORR, compared to pure ZnO.
PB  - Royal Society of Chemistry
T2  - Physical Chemistry Chemical Physics
T1  - Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry
SP  - 22078
EP  - 22095
VL  - 22
IS  - 38
DO  - 10.1039/D0CP03377D
UR  - https://hdl.handle.net/21.15107/rcub_dais_9543
ER  - 
@article{
author = "Rajić, Vladimir and Stojković Simatović, Ivana and Veselinović, Ljiljana and Belošević Čavor, Jelena and Novaković, Mirjana and Popović, Maja and Škapin, Srečo Davor and Mojović, Miloš and Stojadinović, Stevan and Rac, Vladislav and Janković Častvan, Ivona and Marković, Smilja",
year = "2020",
abstract = "Eco-friendly and rapid microwave processing of a precipitate was used to produce Fe-doped zinc oxide (Zn1−xFexO, x = 0, 0.05, 0.1, 0.15 and 0.20; ZnO:Fe) nanoparticles, which were tested as catalysts toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in a moderately alkaline solution. The phase composition, crystal structure, morphology, textural properties, surface chemistry, optical properties and band structure were examined to comprehend the influence of Zn2+ partial substitution with Fe3+ on the catalytic activity of ZnO:Fe. Linear sweep voltammetry showed an improved catalytic activity of ZnO:5Fe toward the ORR, compared to pure ZnO, while with increased amounts of the Fe-dopant the activity decreased. The improvement was suggested by a more positive onset potential (0.394 V vs. RHE), current density (0.231 mA cm−2 at 0.150 V vs. RHE), and faster kinetics (Tafel slope, b = 248 mV dec−1), and it may be due to the synergistic effect of (1) a sufficient amount of surface oxygen vacancies, and (2) a certain amount of plate-like particles composed of crystallites with well developed (0001) and (000) facets. Quite the contrary, the OER study showed that the introduction of Fe3+ ions into the ZnO crystal structure resulted in enhanced catalytic activity of all ZnO:Fe samples, compared to pure ZnO, probably due to the modified binding energy and an optimized band structure. With the maximal current density of 1.066 mA cm−2 at 2.216 V vs. RHE, an onset potential of 1.856 V vs. RHE, and the smallest potential difference between the OER and ORR (ΔE = 1.58 V), ZnO:10Fe may be considered a promising bifunctional catalyst toward the OER/ORR in moderately alkaline solution. This study demonstrates that the electrocatalytic activity of ZnO:Fe strongly depends on the defect chemistry and consequently the band structure. Along with providing fundamental insight into the electrocatalytic activity of ZnO:Fe, the study also indicates an optimal stoichiometry for enhanced bifunctional activity toward the OER/ORR, compared to pure ZnO.",
publisher = "Royal Society of Chemistry",
journal = "Physical Chemistry Chemical Physics",
title = "Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry",
pages = "22078-22095",
volume = "22",
number = "38",
doi = "10.1039/D0CP03377D",
url = "https://hdl.handle.net/21.15107/rcub_dais_9543"
}
Rajić, V., Stojković Simatović, I., Veselinović, L., Belošević Čavor, J., Novaković, M., Popović, M., Škapin, S. D., Mojović, M., Stojadinović, S., Rac, V., Janković Častvan, I.,& Marković, S.. (2020). Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry. in Physical Chemistry Chemical Physics
Royal Society of Chemistry., 22(38), 22078-22095.
https://doi.org/10.1039/D0CP03377D
https://hdl.handle.net/21.15107/rcub_dais_9543
Rajić V, Stojković Simatović I, Veselinović L, Belošević Čavor J, Novaković M, Popović M, Škapin SD, Mojović M, Stojadinović S, Rac V, Janković Častvan I, Marković S. Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry. in Physical Chemistry Chemical Physics. 2020;22(38):22078-22095.
doi:10.1039/D0CP03377D
https://hdl.handle.net/21.15107/rcub_dais_9543 .
Rajić, Vladimir, Stojković Simatović, Ivana, Veselinović, Ljiljana, Belošević Čavor, Jelena, Novaković, Mirjana, Popović, Maja, Škapin, Srečo Davor, Mojović, Miloš, Stojadinović, Stevan, Rac, Vladislav, Janković Častvan, Ivona, Marković, Smilja, "Bifunctional catalytic activity of Zn1−xFexO toward the OER/ORR: seeking an optimal stoichiometry" in Physical Chemistry Chemical Physics, 22, no. 38 (2020):22078-22095,
https://doi.org/10.1039/D0CP03377D .,
https://hdl.handle.net/21.15107/rcub_dais_9543 .
1
1

HAp:Co as tunable VIS-NIR reflective pigment

Marković, Smilja; Stojanović, Zoran S.; Veselinović, Ljiljana; Simić, Danica; Samolov, Aleksandra; Stojković Simatović, Ivana

(Belgrade : Military Technical Institute, 2020)

TY  - CONF
AU  - Marković, Smilja
AU  - Stojanović, Zoran S.
AU  - Veselinović, Ljiljana
AU  - Simić, Danica
AU  - Samolov, Aleksandra
AU  - Stojković Simatović, Ivana
PY  - 2020
UR  - http://www.vti.mod.gov.rs/oteh/elementi/rad/125.pdf
UR  - https://dais.sanu.ac.rs/123456789/10038
AB  - Radar-absorbent materials, used in stealth technology for defense aircrafts, vehicles, satellites, etc. from radar detection, are commonly based on graphite or semiconductive particles embedded in a polymer matrix. In this study, we employed Co2+ ion-substitution to improve Vis-NIR reflectivity of hydroxyapatite (Ca10(PO4)6(OH)2, HAP) powder. HAP:Co with nominally 5 at.% of Co was prepared with hydrothermal processing of a precipitate. Synthesized powder was characterized by XRD, Raman and ATR-FTIR spectroscopy, FE-SEM and TEM. Thermal stability of HAP:Co powder was examined by simultaneous TG-DTA analyzer. To modify its optical properties and obtain powders with a varietty of color tone, the HAP:Co powder was calcined at 800, 1000, and 1100 °C, in an air atmosphere, for 1 hour. Afterward, the calcined particles were used to prepare composites with poly(vinyl butyral), (PVB); the concentration range was 1 wt.% of the HAP:Co in PVB. The composite coatings, in the form of thin films on glass, were prepared by the solvent-casting technique, using ethanol as a fast evaporating solvent. Firstly, the HAP:Co particles were dispersed in ethanol, then PVB was added (Mowital B30H) and dissolved. To evaporate the solvent before spectrophotometric measurements, the coatings on glass were dried at room temperature for 72 hours. To comprehend optical properties of the coatings, diffuse reflection, transmission, and color coordinates were determined. We found that calcined HAP:Co particles have potential to be used in the formulation of coatings for camouflage protection.
PB  - Belgrade : Military Technical Institute
C3  - 9th International Scientific Conference on Defensive Technologies : OTEH2020, Belgrade, Serbia, 15-16 October 2020
T1  - HAp:Co as tunable VIS-NIR reflective pigment
SP  - 475
EP  - 480
UR  - https://hdl.handle.net/21.15107/rcub_dais_10038
ER  - 
@conference{
author = "Marković, Smilja and Stojanović, Zoran S. and Veselinović, Ljiljana and Simić, Danica and Samolov, Aleksandra and Stojković Simatović, Ivana",
year = "2020",
abstract = "Radar-absorbent materials, used in stealth technology for defense aircrafts, vehicles, satellites, etc. from radar detection, are commonly based on graphite or semiconductive particles embedded in a polymer matrix. In this study, we employed Co2+ ion-substitution to improve Vis-NIR reflectivity of hydroxyapatite (Ca10(PO4)6(OH)2, HAP) powder. HAP:Co with nominally 5 at.% of Co was prepared with hydrothermal processing of a precipitate. Synthesized powder was characterized by XRD, Raman and ATR-FTIR spectroscopy, FE-SEM and TEM. Thermal stability of HAP:Co powder was examined by simultaneous TG-DTA analyzer. To modify its optical properties and obtain powders with a varietty of color tone, the HAP:Co powder was calcined at 800, 1000, and 1100 °C, in an air atmosphere, for 1 hour. Afterward, the calcined particles were used to prepare composites with poly(vinyl butyral), (PVB); the concentration range was 1 wt.% of the HAP:Co in PVB. The composite coatings, in the form of thin films on glass, were prepared by the solvent-casting technique, using ethanol as a fast evaporating solvent. Firstly, the HAP:Co particles were dispersed in ethanol, then PVB was added (Mowital B30H) and dissolved. To evaporate the solvent before spectrophotometric measurements, the coatings on glass were dried at room temperature for 72 hours. To comprehend optical properties of the coatings, diffuse reflection, transmission, and color coordinates were determined. We found that calcined HAP:Co particles have potential to be used in the formulation of coatings for camouflage protection.",
publisher = "Belgrade : Military Technical Institute",
journal = "9th International Scientific Conference on Defensive Technologies : OTEH2020, Belgrade, Serbia, 15-16 October 2020",
title = "HAp:Co as tunable VIS-NIR reflective pigment",
pages = "475-480",
url = "https://hdl.handle.net/21.15107/rcub_dais_10038"
}
Marković, S., Stojanović, Z. S., Veselinović, L., Simić, D., Samolov, A.,& Stojković Simatović, I.. (2020). HAp:Co as tunable VIS-NIR reflective pigment. in 9th International Scientific Conference on Defensive Technologies : OTEH2020, Belgrade, Serbia, 15-16 October 2020
Belgrade : Military Technical Institute., 475-480.
https://hdl.handle.net/21.15107/rcub_dais_10038
Marković S, Stojanović ZS, Veselinović L, Simić D, Samolov A, Stojković Simatović I. HAp:Co as tunable VIS-NIR reflective pigment. in 9th International Scientific Conference on Defensive Technologies : OTEH2020, Belgrade, Serbia, 15-16 October 2020. 2020;:475-480.
https://hdl.handle.net/21.15107/rcub_dais_10038 .
Marković, Smilja, Stojanović, Zoran S., Veselinović, Ljiljana, Simić, Danica, Samolov, Aleksandra, Stojković Simatović, Ivana, "HAp:Co as tunable VIS-NIR reflective pigment" in 9th International Scientific Conference on Defensive Technologies : OTEH2020, Belgrade, Serbia, 15-16 October 2020 (2020):475-480,
https://hdl.handle.net/21.15107/rcub_dais_10038 .

Supplementary information for the article: Filipović, N., Veselinović, L., Ražić, S., Jeremić, S., Filipič, M., Žegura, B., Tomić, S., Čolić, M., Stevanović, M., 2019. Poly (ε-caprolactone) microspheres for prolonged release of selenium nanoparticles. Materials Science and Engineering C 96, 776–789. https://doi.org/10.1016/j.msec.2018.11.073

Filipović, Nenad; Veselinović, Ljiljana; Ražić, Slavica; Jeremić, Sanja; Filipič, Metka; Žegura, Bojana; Tomić, Sergej; Čolić, Miodrag; Stevanović, Magdalena

(2019)

TY  - DATA
AU  - Filipović, Nenad
AU  - Veselinović, Ljiljana
AU  - Ražić, Slavica
AU  - Jeremić, Sanja
AU  - Filipič, Metka
AU  - Žegura, Bojana
AU  - Tomić, Sergej
AU  - Čolić, Miodrag
AU  - Stevanović, Magdalena
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/5972
T2  - Materials Science and Engineering C
T1  - Supplementary information for the article: Filipović, N., Veselinović, L., Ražić, S., Jeremić, S., Filipič, M., Žegura, B., Tomić, S., Čolić, M., Stevanović, M., 2019. Poly (ε-caprolactone) microspheres for prolonged release of selenium nanoparticles. Materials Science and Engineering C 96, 776–789. https://doi.org/10.1016/j.msec.2018.11.073
UR  - https://hdl.handle.net/21.15107/rcub_dais_5972
ER  - 
@misc{
author = "Filipović, Nenad and Veselinović, Ljiljana and Ražić, Slavica and Jeremić, Sanja and Filipič, Metka and Žegura, Bojana and Tomić, Sergej and Čolić, Miodrag and Stevanović, Magdalena",
year = "2019",
journal = "Materials Science and Engineering C",
title = "Supplementary information for the article: Filipović, N., Veselinović, L., Ražić, S., Jeremić, S., Filipič, M., Žegura, B., Tomić, S., Čolić, M., Stevanović, M., 2019. Poly (ε-caprolactone) microspheres for prolonged release of selenium nanoparticles. Materials Science and Engineering C 96, 776–789. https://doi.org/10.1016/j.msec.2018.11.073",
url = "https://hdl.handle.net/21.15107/rcub_dais_5972"
}
Filipović, N., Veselinović, L., Ražić, S., Jeremić, S., Filipič, M., Žegura, B., Tomić, S., Čolić, M.,& Stevanović, M.. (2019). Supplementary information for the article: Filipović, N., Veselinović, L., Ražić, S., Jeremić, S., Filipič, M., Žegura, B., Tomić, S., Čolić, M., Stevanović, M., 2019. Poly (ε-caprolactone) microspheres for prolonged release of selenium nanoparticles. Materials Science and Engineering C 96, 776–789. https://doi.org/10.1016/j.msec.2018.11.073. in Materials Science and Engineering C.
https://hdl.handle.net/21.15107/rcub_dais_5972
Filipović N, Veselinović L, Ražić S, Jeremić S, Filipič M, Žegura B, Tomić S, Čolić M, Stevanović M. Supplementary information for the article: Filipović, N., Veselinović, L., Ražić, S., Jeremić, S., Filipič, M., Žegura, B., Tomić, S., Čolić, M., Stevanović, M., 2019. Poly (ε-caprolactone) microspheres for prolonged release of selenium nanoparticles. Materials Science and Engineering C 96, 776–789. https://doi.org/10.1016/j.msec.2018.11.073. in Materials Science and Engineering C. 2019;.
https://hdl.handle.net/21.15107/rcub_dais_5972 .
Filipović, Nenad, Veselinović, Ljiljana, Ražić, Slavica, Jeremić, Sanja, Filipič, Metka, Žegura, Bojana, Tomić, Sergej, Čolić, Miodrag, Stevanović, Magdalena, "Supplementary information for the article: Filipović, N., Veselinović, L., Ražić, S., Jeremić, S., Filipič, M., Žegura, B., Tomić, S., Čolić, M., Stevanović, M., 2019. Poly (ε-caprolactone) microspheres for prolonged release of selenium nanoparticles. Materials Science and Engineering C 96, 776–789. https://doi.org/10.1016/j.msec.2018.11.073" in Materials Science and Engineering C (2019),
https://hdl.handle.net/21.15107/rcub_dais_5972 .

Poly (ε-caprolactone) microspheres for prolonged release of selenium nanoparticles

Filipović, Nenad; Veselinović, Ljiljana; Ražić, Slavica; Jeremić, Sanja; Filipič, Metka; Žegura, Bojana; Tomić, Sergej; Čolić, Miodrag; Stevanović, Magdalena

(Elsevier, 2019)

TY  - JOUR
AU  - Filipović, Nenad
AU  - Veselinović, Ljiljana
AU  - Ražić, Slavica
AU  - Jeremić, Sanja
AU  - Filipič, Metka
AU  - Žegura, Bojana
AU  - Tomić, Sergej
AU  - Čolić, Miodrag
AU  - Stevanović, Magdalena
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/4600
AB  - Poly (ε-caprolactone) (PCL) microspheres as a carrier for sustained release of antibacterial agent, selenium nanoparticles (SeNPs), were developed. The obtained PCL/SeNPs microspheres were in the range 1–4 μm with the encapsulation efficiency of about 90%. The degradation process and release behavior of SeNPs from PCL microspheres were investigated in five different degradation media: phosphate buffer solution (PBS), a solution of lipase isolated from the porcine pancreas in PBS, 0.1 M hydrochloric acid (HCl), Pseudomonas aeruginosa PAO1 cell-free extract in PBS and implant fluid (exudate) from the subcutaneously implanted sterile polyvinyl sponges which induce a foreign-body inflammatory reaction. The samples were thoroughly characterized by SEM, TEM, FTIR, XRD, PSA, DSC, confocal microscopy, and ICP-OES techniques. Under physiological conditions at neutral pH, a very slow release of SeNPs occurred (3 and 8% in the case of PBS or PBS + lipase, respectively and after 660 days), while in the acidic environment their presence was not detected. On the other hand, the release in the medium with bacterial extract was much more pronounced, even after 24 h (13%). After 7 days, the concentration of SeNPs reached a maximum of around 30%. Also, 37% of SeNPs have been released after 11 days of incubation of PCL/SeNPs in the implant exudate. These results suggest that the release of SeNPs from PCL was triggered by Pseudomonas aeruginosa PAO1 bacterium as well as by foreign body inflammatory reaction to implant. Furthermore, PCL/SeNPs microspheres were investigated in terms of their biocompatibility. For this purpose, cytotoxicity, the formation of reactive oxygen species (ROS), and genotoxicity were evaluated on HepG2 cell line. The interaction of PCL/SeNPs with phagocytic cell line (Raw 264.7 macrophages) was monitored as well. It was found that the microspheres in investigated concentration range had no acute cytotoxic effects. Finally, SeNPs, as well as PCL/SeNPs, showed a considerable antibacterial activity against Gram-positive bacteria: Staphylococcus aureus (ATCC 25923) and Staphylococcus epidermidis (ATCC 1228). These results suggest that PCL/SeNPs-based system could be an attractive platform for a prolonged prevention of infections accompanying implants. © 2018 Elsevier B.V.
PB  - Elsevier
T2  - Materials Science and Engineering C
T1  - Poly (ε-caprolactone) microspheres for prolonged release of selenium nanoparticles
SP  - 776
EP  - 789
VL  - 96
DO  - 10.1016/j.msec.2018.11.073
UR  - https://hdl.handle.net/21.15107/rcub_dais_4600
ER  - 
@article{
author = "Filipović, Nenad and Veselinović, Ljiljana and Ražić, Slavica and Jeremić, Sanja and Filipič, Metka and Žegura, Bojana and Tomić, Sergej and Čolić, Miodrag and Stevanović, Magdalena",
year = "2019",
abstract = "Poly (ε-caprolactone) (PCL) microspheres as a carrier for sustained release of antibacterial agent, selenium nanoparticles (SeNPs), were developed. The obtained PCL/SeNPs microspheres were in the range 1–4 μm with the encapsulation efficiency of about 90%. The degradation process and release behavior of SeNPs from PCL microspheres were investigated in five different degradation media: phosphate buffer solution (PBS), a solution of lipase isolated from the porcine pancreas in PBS, 0.1 M hydrochloric acid (HCl), Pseudomonas aeruginosa PAO1 cell-free extract in PBS and implant fluid (exudate) from the subcutaneously implanted sterile polyvinyl sponges which induce a foreign-body inflammatory reaction. The samples were thoroughly characterized by SEM, TEM, FTIR, XRD, PSA, DSC, confocal microscopy, and ICP-OES techniques. Under physiological conditions at neutral pH, a very slow release of SeNPs occurred (3 and 8% in the case of PBS or PBS + lipase, respectively and after 660 days), while in the acidic environment their presence was not detected. On the other hand, the release in the medium with bacterial extract was much more pronounced, even after 24 h (13%). After 7 days, the concentration of SeNPs reached a maximum of around 30%. Also, 37% of SeNPs have been released after 11 days of incubation of PCL/SeNPs in the implant exudate. These results suggest that the release of SeNPs from PCL was triggered by Pseudomonas aeruginosa PAO1 bacterium as well as by foreign body inflammatory reaction to implant. Furthermore, PCL/SeNPs microspheres were investigated in terms of their biocompatibility. For this purpose, cytotoxicity, the formation of reactive oxygen species (ROS), and genotoxicity were evaluated on HepG2 cell line. The interaction of PCL/SeNPs with phagocytic cell line (Raw 264.7 macrophages) was monitored as well. It was found that the microspheres in investigated concentration range had no acute cytotoxic effects. Finally, SeNPs, as well as PCL/SeNPs, showed a considerable antibacterial activity against Gram-positive bacteria: Staphylococcus aureus (ATCC 25923) and Staphylococcus epidermidis (ATCC 1228). These results suggest that PCL/SeNPs-based system could be an attractive platform for a prolonged prevention of infections accompanying implants. © 2018 Elsevier B.V.",
publisher = "Elsevier",
journal = "Materials Science and Engineering C",
title = "Poly (ε-caprolactone) microspheres for prolonged release of selenium nanoparticles",
pages = "776-789",
volume = "96",
doi = "10.1016/j.msec.2018.11.073",
url = "https://hdl.handle.net/21.15107/rcub_dais_4600"
}
Filipović, N., Veselinović, L., Ražić, S., Jeremić, S., Filipič, M., Žegura, B., Tomić, S., Čolić, M.,& Stevanović, M.. (2019). Poly (ε-caprolactone) microspheres for prolonged release of selenium nanoparticles. in Materials Science and Engineering C
Elsevier., 96, 776-789.
https://doi.org/10.1016/j.msec.2018.11.073
https://hdl.handle.net/21.15107/rcub_dais_4600
Filipović N, Veselinović L, Ražić S, Jeremić S, Filipič M, Žegura B, Tomić S, Čolić M, Stevanović M. Poly (ε-caprolactone) microspheres for prolonged release of selenium nanoparticles. in Materials Science and Engineering C. 2019;96:776-789.
doi:10.1016/j.msec.2018.11.073
https://hdl.handle.net/21.15107/rcub_dais_4600 .
Filipović, Nenad, Veselinović, Ljiljana, Ražić, Slavica, Jeremić, Sanja, Filipič, Metka, Žegura, Bojana, Tomić, Sergej, Čolić, Miodrag, Stevanović, Magdalena, "Poly (ε-caprolactone) microspheres for prolonged release of selenium nanoparticles" in Materials Science and Engineering C, 96 (2019):776-789,
https://doi.org/10.1016/j.msec.2018.11.073 .,
https://hdl.handle.net/21.15107/rcub_dais_4600 .
1
9
10
10

Poly (ε-caprolactone) microspheres for prolonged release of selenium nanoparticles

Filipović, Nenad; Veselinović, Ljiljana; Ražić, Slavica; Jeremić, Sanja; Filipič, Metka; Žegura, Bojana; Tomić, Sergej; Čolić, Miodrag; Stevanović, Magdalena

(Elsevier, 2019)

TY  - JOUR
AU  - Filipović, Nenad
AU  - Veselinović, Ljiljana
AU  - Ražić, Slavica
AU  - Jeremić, Sanja
AU  - Filipič, Metka
AU  - Žegura, Bojana
AU  - Tomić, Sergej
AU  - Čolić, Miodrag
AU  - Stevanović, Magdalena
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/4590
AB  - Poly (ε-caprolactone) (PCL) microspheres as a carrier for sustained release of antibacterial agent, selenium nanoparticles (SeNPs), were developed. The obtained PCL/SeNPs microspheres were in the range 1–4 μm with the encapsulation efficiency of about 90%. The degradation process and release behavior of SeNPs from PCL microspheres were investigated in five different degradation media: phosphate buffer solution (PBS), a solution of lipase isolated from the porcine pancreas in PBS, 0.1 M hydrochloric acid (HCl), Pseudomonas aeruginosa PAO1 cell-free extract in PBS and implant fluid (exudate) from the subcutaneously implanted sterile polyvinyl sponges which induce a foreign-body inflammatory reaction. The samples were thoroughly characterized by SEM, TEM, FTIR, XRD, PSA, DSC, confocal microscopy, and ICP-OES techniques. Under physiological conditions at neutral pH, a very slow release of SeNPs occurred (3 and 8% in the case of PBS or PBS + lipase, respectively and after 660 days), while in the acidic environment their presence was not detected. On the other hand, the release in the medium with bacterial extract was much more pronounced, even after 24 h (13%). After 7 days, the concentration of SeNPs reached a maximum of around 30%. Also, 37% of SeNPs have been released after 11 days of incubation of PCL/SeNPs in the implant exudate. These results suggest that the release of SeNPs from PCL was triggered by Pseudomonas aeruginosa PAO1 bacterium as well as by foreign body inflammatory reaction to implant. Furthermore, PCL/SeNPs microspheres were investigated in terms of their biocompatibility. For this purpose, cytotoxicity, the formation of reactive oxygen species (ROS), and genotoxicity were evaluated on HepG2 cell line. The interaction of PCL/SeNPs with phagocytic cell line (Raw 264.7 macrophages) was monitored as well. It was found that the microspheres in investigated concentration range had no acute cytotoxic effects. Finally, SeNPs, as well as PCL/SeNPs, showed a considerable antibacterial activity against Gram-positive bacteria: Staphylococcus aureus (ATCC 25923) and Staphylococcus epidermidis (ATCC 1228). These results suggest that PCL/SeNPs-based system could be an attractive platform for a prolonged prevention of infections accompanying implants. © 2018 Elsevier B.V.
PB  - Elsevier
T2  - Materials Science and Engineering C
T1  - Poly (ε-caprolactone) microspheres for prolonged release of selenium nanoparticles
SP  - 776
EP  - 789
VL  - 96
DO  - 10.1016/j.msec.2018.11.073
UR  - https://hdl.handle.net/21.15107/rcub_dais_4590
ER  - 
@article{
author = "Filipović, Nenad and Veselinović, Ljiljana and Ražić, Slavica and Jeremić, Sanja and Filipič, Metka and Žegura, Bojana and Tomić, Sergej and Čolić, Miodrag and Stevanović, Magdalena",
year = "2019",
abstract = "Poly (ε-caprolactone) (PCL) microspheres as a carrier for sustained release of antibacterial agent, selenium nanoparticles (SeNPs), were developed. The obtained PCL/SeNPs microspheres were in the range 1–4 μm with the encapsulation efficiency of about 90%. The degradation process and release behavior of SeNPs from PCL microspheres were investigated in five different degradation media: phosphate buffer solution (PBS), a solution of lipase isolated from the porcine pancreas in PBS, 0.1 M hydrochloric acid (HCl), Pseudomonas aeruginosa PAO1 cell-free extract in PBS and implant fluid (exudate) from the subcutaneously implanted sterile polyvinyl sponges which induce a foreign-body inflammatory reaction. The samples were thoroughly characterized by SEM, TEM, FTIR, XRD, PSA, DSC, confocal microscopy, and ICP-OES techniques. Under physiological conditions at neutral pH, a very slow release of SeNPs occurred (3 and 8% in the case of PBS or PBS + lipase, respectively and after 660 days), while in the acidic environment their presence was not detected. On the other hand, the release in the medium with bacterial extract was much more pronounced, even after 24 h (13%). After 7 days, the concentration of SeNPs reached a maximum of around 30%. Also, 37% of SeNPs have been released after 11 days of incubation of PCL/SeNPs in the implant exudate. These results suggest that the release of SeNPs from PCL was triggered by Pseudomonas aeruginosa PAO1 bacterium as well as by foreign body inflammatory reaction to implant. Furthermore, PCL/SeNPs microspheres were investigated in terms of their biocompatibility. For this purpose, cytotoxicity, the formation of reactive oxygen species (ROS), and genotoxicity were evaluated on HepG2 cell line. The interaction of PCL/SeNPs with phagocytic cell line (Raw 264.7 macrophages) was monitored as well. It was found that the microspheres in investigated concentration range had no acute cytotoxic effects. Finally, SeNPs, as well as PCL/SeNPs, showed a considerable antibacterial activity against Gram-positive bacteria: Staphylococcus aureus (ATCC 25923) and Staphylococcus epidermidis (ATCC 1228). These results suggest that PCL/SeNPs-based system could be an attractive platform for a prolonged prevention of infections accompanying implants. © 2018 Elsevier B.V.",
publisher = "Elsevier",
journal = "Materials Science and Engineering C",
title = "Poly (ε-caprolactone) microspheres for prolonged release of selenium nanoparticles",
pages = "776-789",
volume = "96",
doi = "10.1016/j.msec.2018.11.073",
url = "https://hdl.handle.net/21.15107/rcub_dais_4590"
}
Filipović, N., Veselinović, L., Ražić, S., Jeremić, S., Filipič, M., Žegura, B., Tomić, S., Čolić, M.,& Stevanović, M.. (2019). Poly (ε-caprolactone) microspheres for prolonged release of selenium nanoparticles. in Materials Science and Engineering C
Elsevier., 96, 776-789.
https://doi.org/10.1016/j.msec.2018.11.073
https://hdl.handle.net/21.15107/rcub_dais_4590
Filipović N, Veselinović L, Ražić S, Jeremić S, Filipič M, Žegura B, Tomić S, Čolić M, Stevanović M. Poly (ε-caprolactone) microspheres for prolonged release of selenium nanoparticles. in Materials Science and Engineering C. 2019;96:776-789.
doi:10.1016/j.msec.2018.11.073
https://hdl.handle.net/21.15107/rcub_dais_4590 .
Filipović, Nenad, Veselinović, Ljiljana, Ražić, Slavica, Jeremić, Sanja, Filipič, Metka, Žegura, Bojana, Tomić, Sergej, Čolić, Miodrag, Stevanović, Magdalena, "Poly (ε-caprolactone) microspheres for prolonged release of selenium nanoparticles" in Materials Science and Engineering C, 96 (2019):776-789,
https://doi.org/10.1016/j.msec.2018.11.073 .,
https://hdl.handle.net/21.15107/rcub_dais_4590 .
1
9
10
12

Supplementary information for the article: Milović, M.D., Vasić Anićijević, D.D., Jugović, D., Anićijević, V.J., Veselinović, L., Mitrić, M., Uskoković, D., 2019. On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study. Solid State Sciences 87, 81–86. https://doi.org/10.1016/j.solidstatesciences.2018.11.008

Milović, Miloš; Vasić Anićijević, Dragana D.; Jugović, Dragana; Anićijević, Vladan J.; Veselinović, Ljiljana; Mitrić, Miodrag; Uskoković, Dragan

(2019)

TY  - DATA
AU  - Milović, Miloš
AU  - Vasić Anićijević, Dragana D.
AU  - Jugović, Dragana
AU  - Anićijević, Vladan J.
AU  - Veselinović, Ljiljana
AU  - Mitrić, Miodrag
AU  - Uskoković, Dragan
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S1293255818308331
UR  - https://dais.sanu.ac.rs/123456789/5971
T2  - Solid State Sciences
T1  - Supplementary information for the article: Milović, M.D., Vasić Anićijević, D.D., Jugović, D., Anićijević, V.J., Veselinović, L., Mitrić, M., Uskoković, D., 2019. On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study. Solid State Sciences 87, 81–86. https://doi.org/10.1016/j.solidstatesciences.2018.11.008
UR  - https://hdl.handle.net/21.15107/rcub_dais_5971
ER  - 
@misc{
author = "Milović, Miloš and Vasić Anićijević, Dragana D. and Jugović, Dragana and Anićijević, Vladan J. and Veselinović, Ljiljana and Mitrić, Miodrag and Uskoković, Dragan",
year = "2019",
journal = "Solid State Sciences",
title = "Supplementary information for the article: Milović, M.D., Vasić Anićijević, D.D., Jugović, D., Anićijević, V.J., Veselinović, L., Mitrić, M., Uskoković, D., 2019. On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study. Solid State Sciences 87, 81–86. https://doi.org/10.1016/j.solidstatesciences.2018.11.008",
url = "https://hdl.handle.net/21.15107/rcub_dais_5971"
}
Milović, M., Vasić Anićijević, D. D., Jugović, D., Anićijević, V. J., Veselinović, L., Mitrić, M.,& Uskoković, D.. (2019). Supplementary information for the article: Milović, M.D., Vasić Anićijević, D.D., Jugović, D., Anićijević, V.J., Veselinović, L., Mitrić, M., Uskoković, D., 2019. On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study. Solid State Sciences 87, 81–86. https://doi.org/10.1016/j.solidstatesciences.2018.11.008. in Solid State Sciences.
https://hdl.handle.net/21.15107/rcub_dais_5971
Milović M, Vasić Anićijević DD, Jugović D, Anićijević VJ, Veselinović L, Mitrić M, Uskoković D. Supplementary information for the article: Milović, M.D., Vasić Anićijević, D.D., Jugović, D., Anićijević, V.J., Veselinović, L., Mitrić, M., Uskoković, D., 2019. On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study. Solid State Sciences 87, 81–86. https://doi.org/10.1016/j.solidstatesciences.2018.11.008. in Solid State Sciences. 2019;.
https://hdl.handle.net/21.15107/rcub_dais_5971 .
Milović, Miloš, Vasić Anićijević, Dragana D., Jugović, Dragana, Anićijević, Vladan J., Veselinović, Ljiljana, Mitrić, Miodrag, Uskoković, Dragan, "Supplementary information for the article: Milović, M.D., Vasić Anićijević, D.D., Jugović, D., Anićijević, V.J., Veselinović, L., Mitrić, M., Uskoković, D., 2019. On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study. Solid State Sciences 87, 81–86. https://doi.org/10.1016/j.solidstatesciences.2018.11.008" in Solid State Sciences (2019),
https://hdl.handle.net/21.15107/rcub_dais_5971 .

On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study

Milović, Miloš; Vasić Anićijević, Dragana D.; Jugović, Dragana; Anićijević, Vladan J.; Veselinović, Ljiljana; Mitrić, Miodrag; Uskoković, Dragan

(Elsevier, 2019)

TY  - JOUR
AU  - Milović, Miloš
AU  - Vasić Anićijević, Dragana D.
AU  - Jugović, Dragana
AU  - Anićijević, Vladan J.
AU  - Veselinović, Ljiljana
AU  - Mitrić, Miodrag
AU  - Uskoković, Dragan
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S1293255818308331
UR  - https://dais.sanu.ac.rs/123456789/4560
AB  - Li2FeSiO4 material, which was prepared by a solid state method, crystallized as monoclinic P21/n polymorph. X-ray diffraction analysis with Rietveld structural refinement indicates specific occupation of Li2 crystallographic site by Fe2+ cation in the amount of 6 atom percents as a result of an antisite defect formation. The exclusive occupation of Li2 position, out of two crystallographic positions Li1 and Li2, by Fe2+ was discussed in relation to the differences that exist in the crystal environment of these positions and further investigated by DFT calculations. It was confirmed that Fe-Li2 substitution is energetically favorable compared to both Fe-Li1 substitution and the pristine crystal. In addition, changes of lattice geometry upon antisite defect formation were analyzed, and the obtained result is discussed in light of various factors (electronic, geometrical and enthropic) that contribute to the overall stability of the system.
PB  - Elsevier
T2  - Solid State Sciences
T1  - On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study
SP  - 81
EP  - 86
VL  - 87
DO  - 10.1016/j.solidstatesciences.2018.11.008
UR  - https://hdl.handle.net/21.15107/rcub_dais_4560
ER  - 
@article{
author = "Milović, Miloš and Vasić Anićijević, Dragana D. and Jugović, Dragana and Anićijević, Vladan J. and Veselinović, Ljiljana and Mitrić, Miodrag and Uskoković, Dragan",
year = "2019",
abstract = "Li2FeSiO4 material, which was prepared by a solid state method, crystallized as monoclinic P21/n polymorph. X-ray diffraction analysis with Rietveld structural refinement indicates specific occupation of Li2 crystallographic site by Fe2+ cation in the amount of 6 atom percents as a result of an antisite defect formation. The exclusive occupation of Li2 position, out of two crystallographic positions Li1 and Li2, by Fe2+ was discussed in relation to the differences that exist in the crystal environment of these positions and further investigated by DFT calculations. It was confirmed that Fe-Li2 substitution is energetically favorable compared to both Fe-Li1 substitution and the pristine crystal. In addition, changes of lattice geometry upon antisite defect formation were analyzed, and the obtained result is discussed in light of various factors (electronic, geometrical and enthropic) that contribute to the overall stability of the system.",
publisher = "Elsevier",
journal = "Solid State Sciences",
title = "On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study",
pages = "81-86",
volume = "87",
doi = "10.1016/j.solidstatesciences.2018.11.008",
url = "https://hdl.handle.net/21.15107/rcub_dais_4560"
}
Milović, M., Vasić Anićijević, D. D., Jugović, D., Anićijević, V. J., Veselinović, L., Mitrić, M.,& Uskoković, D.. (2019). On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study. in Solid State Sciences
Elsevier., 87, 81-86.
https://doi.org/10.1016/j.solidstatesciences.2018.11.008
https://hdl.handle.net/21.15107/rcub_dais_4560
Milović M, Vasić Anićijević DD, Jugović D, Anićijević VJ, Veselinović L, Mitrić M, Uskoković D. On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study. in Solid State Sciences. 2019;87:81-86.
doi:10.1016/j.solidstatesciences.2018.11.008
https://hdl.handle.net/21.15107/rcub_dais_4560 .
Milović, Miloš, Vasić Anićijević, Dragana D., Jugović, Dragana, Anićijević, Vladan J., Veselinović, Ljiljana, Mitrić, Miodrag, Uskoković, Dragan, "On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study" in Solid State Sciences, 87 (2019):81-86,
https://doi.org/10.1016/j.solidstatesciences.2018.11.008 .,
https://hdl.handle.net/21.15107/rcub_dais_4560 .
1
2
2

On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study

Milović, Miloš; Vasić Anićijević, Dragana D.; Jugović, Dragana; Anićijević, Vladan J.; Veselinović, Ljiljana; Mitrić, Miodrag; Uskoković, Dragan

(Elsevier, 2019)

TY  - JOUR
AU  - Milović, Miloš
AU  - Vasić Anićijević, Dragana D.
AU  - Jugović, Dragana
AU  - Anićijević, Vladan J.
AU  - Veselinović, Ljiljana
AU  - Mitrić, Miodrag
AU  - Uskoković, Dragan
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S1293255818308331
UR  - https://dais.sanu.ac.rs/123456789/4552
AB  - Li2FeSiO4 material, which was prepared by a solid state method, crystallized as monoclinic P21/n polymorph. X-ray diffraction analysis with Rietveld structural refinement indicates specific occupation of Li2 crystallographic site by Fe2+ cation in the amount of 6 atom percents as a result of an antisite defect formation. The exclusive occupation of Li2 position, out of two crystallographic positions Li1 and Li2, by Fe2+ was discussed in relation to the differences that exist in the crystal environment of these positions and further investigated by DFT calculations. It was confirmed that Fe-Li2 substitution is energetically favorable compared to both Fe-Li1 substitution and the pristine crystal. In addition, changes of lattice geometry upon antisite defect formation were analyzed, and the obtained result is discussed in light of various factors (electronic, geometrical and enthropic) that contribute to the overall stability of the system.
PB  - Elsevier
T2  - Solid State Sciences
T1  - On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study
SP  - 81
EP  - 86
VL  - 87
DO  - 10.1016/j.solidstatesciences.2018.11.008
UR  - https://hdl.handle.net/21.15107/rcub_dais_4552
ER  - 
@article{
author = "Milović, Miloš and Vasić Anićijević, Dragana D. and Jugović, Dragana and Anićijević, Vladan J. and Veselinović, Ljiljana and Mitrić, Miodrag and Uskoković, Dragan",
year = "2019",
abstract = "Li2FeSiO4 material, which was prepared by a solid state method, crystallized as monoclinic P21/n polymorph. X-ray diffraction analysis with Rietveld structural refinement indicates specific occupation of Li2 crystallographic site by Fe2+ cation in the amount of 6 atom percents as a result of an antisite defect formation. The exclusive occupation of Li2 position, out of two crystallographic positions Li1 and Li2, by Fe2+ was discussed in relation to the differences that exist in the crystal environment of these positions and further investigated by DFT calculations. It was confirmed that Fe-Li2 substitution is energetically favorable compared to both Fe-Li1 substitution and the pristine crystal. In addition, changes of lattice geometry upon antisite defect formation were analyzed, and the obtained result is discussed in light of various factors (electronic, geometrical and enthropic) that contribute to the overall stability of the system.",
publisher = "Elsevier",
journal = "Solid State Sciences",
title = "On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study",
pages = "81-86",
volume = "87",
doi = "10.1016/j.solidstatesciences.2018.11.008",
url = "https://hdl.handle.net/21.15107/rcub_dais_4552"
}
Milović, M., Vasić Anićijević, D. D., Jugović, D., Anićijević, V. J., Veselinović, L., Mitrić, M.,& Uskoković, D.. (2019). On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study. in Solid State Sciences
Elsevier., 87, 81-86.
https://doi.org/10.1016/j.solidstatesciences.2018.11.008
https://hdl.handle.net/21.15107/rcub_dais_4552
Milović M, Vasić Anićijević DD, Jugović D, Anićijević VJ, Veselinović L, Mitrić M, Uskoković D. On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study. in Solid State Sciences. 2019;87:81-86.
doi:10.1016/j.solidstatesciences.2018.11.008
https://hdl.handle.net/21.15107/rcub_dais_4552 .
Milović, Miloš, Vasić Anićijević, Dragana D., Jugović, Dragana, Anićijević, Vladan J., Veselinović, Ljiljana, Mitrić, Miodrag, Uskoković, Dragan, "On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study" in Solid State Sciences, 87 (2019):81-86,
https://doi.org/10.1016/j.solidstatesciences.2018.11.008 .,
https://hdl.handle.net/21.15107/rcub_dais_4552 .
1
2
2

Point defect-enhanced optical and photoelectrochemical water splitting activity of nanostructured Zn1-xFeyO(1-x+1.5y)

Marković, Smilja; Rajić, Vladimir B.; Stojković Simatović, Ivana; Veselinović, Ljiljana; Belošević Čavor, Jelena; Ivanovski, Valentin N.; Novaković, Mirjana; Škapin, Srečo Davor; Stojadinović, Stevan; Rac, Vladislav; Uskoković, Dragan

(Belgrade : Materials Research Society of Serbia, 2019)

TY  - CONF
AU  - Marković, Smilja
AU  - Rajić, Vladimir B.
AU  - Stojković Simatović, Ivana
AU  - Veselinović, Ljiljana
AU  - Belošević Čavor, Jelena
AU  - Ivanovski, Valentin N.
AU  - Novaković, Mirjana
AU  - Škapin, Srečo Davor
AU  - Stojadinović, Stevan
AU  - Rac, Vladislav
AU  - Uskoković, Dragan
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/6677
AB  - Even has been under study since 1935, zinc oxide (ZnO) based materials still attract a huge scientific attention. Owing to a wide band gap energy (3.37 eV at room temperature) and a large exciton binding energy (60 meV) ZnO has a variety of application, e.g. in electronics, optoelectronics, spintronics and photocatalysis. Besides, it has been shown that zinc oxide-based materials have a great potential as photoelectrocatalysts in the processes of water splitting, yielding an increased both photocurrent density and photoconversion efficiency. However, with a band gap energy of 3.37 eV, ZnO is restricted to absorb UV light only. This restriction can be overcome by modifying optical properties of zinc oxide particles. During the years different approaches have been applied to modify the visible light photocatalytic activity of ZnO materials, for example: (1) metal and nonmetal ion doping, (2) hydrogenation, (3) the incorporation of crystalline defects in the form of vacancies and interstitials, (4) the modification of particles morphology and surface topology, etc.
In this study we employed 3d metal ion substitution to improve visible light-driven photoactivity of zinc oxide particles. We investigated the influence of Fe concentration in Zn1-xFeyO(1-x+1.5y) nanoparticles on crystal structure, textural, optical and photoelectrocatalytic properties. Zn1-xFeyO(1-x+1.5y) nanoparticles with nominally 5, 10, 15 and 20 at.% of Fe ions were synthesized by microwave processing of a precipitate. The crystal structure and phase purity of the samples were investigated by X-ray diffraction, Raman and ATR-FTIR spectroscopy. Mössbauer spectroscopy was carried out to clarify the valence state of the iron ions in the ZnO crystal structure. Effects of the iron ions concentration on particles morphology and texture properties were observed with field emission scanning electron microscopy (FE–SEM), transmission electron microscopy (TEM) with elemental mapping, and nitrogen adsorption–desorption isotherm, respectively. The optical properties were studied using UV–Vis diffuse reflectance and photoluminescence (PL) spectroscopy. Photoelectrochemical activity of the Zn1-xFeyO(1-x+1.5y) samples as anode material was evaluated by linear sweep voltammetry in Na2SO4 electrolyte; the oxygen evolution kinetics were determined and compared. In addition, a series of first principles calculations were performed to address the influence of the iron concentration on the electronic structure of Zn1-xFeyO(1-x+1.5y) samples.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019
T1  - Point defect-enhanced optical and photoelectrochemical water splitting activity of nanostructured Zn1-xFeyO(1-x+1.5y)
SP  - 54
EP  - 54
UR  - https://hdl.handle.net/21.15107/rcub_dais_6677
ER  - 
@conference{
author = "Marković, Smilja and Rajić, Vladimir B. and Stojković Simatović, Ivana and Veselinović, Ljiljana and Belošević Čavor, Jelena and Ivanovski, Valentin N. and Novaković, Mirjana and Škapin, Srečo Davor and Stojadinović, Stevan and Rac, Vladislav and Uskoković, Dragan",
year = "2019",
abstract = "Even has been under study since 1935, zinc oxide (ZnO) based materials still attract a huge scientific attention. Owing to a wide band gap energy (3.37 eV at room temperature) and a large exciton binding energy (60 meV) ZnO has a variety of application, e.g. in electronics, optoelectronics, spintronics and photocatalysis. Besides, it has been shown that zinc oxide-based materials have a great potential as photoelectrocatalysts in the processes of water splitting, yielding an increased both photocurrent density and photoconversion efficiency. However, with a band gap energy of 3.37 eV, ZnO is restricted to absorb UV light only. This restriction can be overcome by modifying optical properties of zinc oxide particles. During the years different approaches have been applied to modify the visible light photocatalytic activity of ZnO materials, for example: (1) metal and nonmetal ion doping, (2) hydrogenation, (3) the incorporation of crystalline defects in the form of vacancies and interstitials, (4) the modification of particles morphology and surface topology, etc.
In this study we employed 3d metal ion substitution to improve visible light-driven photoactivity of zinc oxide particles. We investigated the influence of Fe concentration in Zn1-xFeyO(1-x+1.5y) nanoparticles on crystal structure, textural, optical and photoelectrocatalytic properties. Zn1-xFeyO(1-x+1.5y) nanoparticles with nominally 5, 10, 15 and 20 at.% of Fe ions were synthesized by microwave processing of a precipitate. The crystal structure and phase purity of the samples were investigated by X-ray diffraction, Raman and ATR-FTIR spectroscopy. Mössbauer spectroscopy was carried out to clarify the valence state of the iron ions in the ZnO crystal structure. Effects of the iron ions concentration on particles morphology and texture properties were observed with field emission scanning electron microscopy (FE–SEM), transmission electron microscopy (TEM) with elemental mapping, and nitrogen adsorption–desorption isotherm, respectively. The optical properties were studied using UV–Vis diffuse reflectance and photoluminescence (PL) spectroscopy. Photoelectrochemical activity of the Zn1-xFeyO(1-x+1.5y) samples as anode material was evaluated by linear sweep voltammetry in Na2SO4 electrolyte; the oxygen evolution kinetics were determined and compared. In addition, a series of first principles calculations were performed to address the influence of the iron concentration on the electronic structure of Zn1-xFeyO(1-x+1.5y) samples.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019",
title = "Point defect-enhanced optical and photoelectrochemical water splitting activity of nanostructured Zn1-xFeyO(1-x+1.5y)",
pages = "54-54",
url = "https://hdl.handle.net/21.15107/rcub_dais_6677"
}
Marković, S., Rajić, V. B., Stojković Simatović, I., Veselinović, L., Belošević Čavor, J., Ivanovski, V. N., Novaković, M., Škapin, S. D., Stojadinović, S., Rac, V.,& Uskoković, D.. (2019). Point defect-enhanced optical and photoelectrochemical water splitting activity of nanostructured Zn1-xFeyO(1-x+1.5y). in Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019
Belgrade : Materials Research Society of Serbia., 54-54.
https://hdl.handle.net/21.15107/rcub_dais_6677
Marković S, Rajić VB, Stojković Simatović I, Veselinović L, Belošević Čavor J, Ivanovski VN, Novaković M, Škapin SD, Stojadinović S, Rac V, Uskoković D. Point defect-enhanced optical and photoelectrochemical water splitting activity of nanostructured Zn1-xFeyO(1-x+1.5y). in Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019. 2019;:54-54.
https://hdl.handle.net/21.15107/rcub_dais_6677 .
Marković, Smilja, Rajić, Vladimir B., Stojković Simatović, Ivana, Veselinović, Ljiljana, Belošević Čavor, Jelena, Ivanovski, Valentin N., Novaković, Mirjana, Škapin, Srečo Davor, Stojadinović, Stevan, Rac, Vladislav, Uskoković, Dragan, "Point defect-enhanced optical and photoelectrochemical water splitting activity of nanostructured Zn1-xFeyO(1-x+1.5y)" in Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019 (2019):54-54,
https://hdl.handle.net/21.15107/rcub_dais_6677 .

Tuning the optical, electrical and photoelectrocatalytic properties of Zno materials by varying of intrinsic defects concentration

Marković, Smilja; Rajić, Vladimir; Veselinović, Ljiljana; Stojković Simatović, Ivana; Belošević Čavor, Jelena; Škapin, Srečo Davor; Kovač, Janez; Nikolić, Marko G.; Uskoković, Dragan

(Budapest : [s. n.], 2019)

TY  - CONF
AU  - Marković, Smilja
AU  - Rajić, Vladimir
AU  - Veselinović, Ljiljana
AU  - Stojković Simatović, Ivana
AU  - Belošević Čavor, Jelena
AU  - Škapin, Srečo Davor
AU  - Kovač, Janez
AU  - Nikolić, Marko G.
AU  - Uskoković, Dragan
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/6997
AB  - During the last decade zinc oxide (ZnO) has attracted considerable attention as a promising material for electronic, optoelectronic and spintronic devices. ZnO has a wide bandgap (3.37 eV at room temperature) and relatively large exciton binding energy (60 meV) which enables multifunctional application. Until now ZnO-based materials have been used as UV and blue light emitters, varistors, thermistors, semiconductors, photoanodes, and other. Various approaches have been applied to improve functional properties of zinc oxide, such as: fabrication of ZnO-based heterojunction particles, particles’ surface sensitization, hydrogenation, etc. It has been found that intrinsic defects (vacancies, interstitials and antisites) in the crystal structure of a ZnO strongly influenced its electrical and optical properties. Thus, correlation of the intrinsic defects concentration with optical and electrical properties of ZnO materials is of great importance for their further application in opto-electronic devices. In this study we investigated the influence of intrinsic defects concentration on the optical, electrical and photoelectrocatalytic properties of ZnO materials. To obtain ZnO powder with a high concentration of intrinsic defects microwave processing of precipitate was employed, while for further varying of defects concentration, the powder was thermally treated in three different atmospheres: air, argon and oxygen. The ZnO powder was uniaxially pressed (P = 100 MPa) in cylindrical compacts (R= 6 mm and h approx. 3 mm) which were sintered in different atmospheres by heating rate of 10 °/min up to 1100 °C, and with dwell time of 1 h. To study a crystal structure of ZnO samples XRD and Raman spectroscopy were used, while for microstructural investigation field emission scanning electron micrographs were recorded. Optical properties were studied using UV–Vis diffuse reflectance spectroscopy. To reveal the role of intrinsic defects in ZnO crystal lattice on functional properties, XPS, photoluminescence, electroluminescence and electrochemical impedance spectra were analyzed. A detailed analysis of the experimental results imply that a high concentration of intrinsic defects, in particular oxygen vacancies, is of the greatest importance for tunable light-emitting diode application and significant for the photoanode properties. To support our experimental observation we performed ab initio calculations based on density functional theory (DFT).
PB  - Budapest : [s. n.]
C3  - Abstracts / International Workshop on Woman in Ceramic Science (WoCeram2019), April 7-9, 2019/ Budapest, Hungary, Novotel Danube Budapest
T1  - Tuning the optical, electrical and photoelectrocatalytic properties of Zno materials by varying of intrinsic defects concentration
SP  - 11
EP  - 11
UR  - https://hdl.handle.net/21.15107/rcub_dais_6997
ER  - 
@conference{
author = "Marković, Smilja and Rajić, Vladimir and Veselinović, Ljiljana and Stojković Simatović, Ivana and Belošević Čavor, Jelena and Škapin, Srečo Davor and Kovač, Janez and Nikolić, Marko G. and Uskoković, Dragan",
year = "2019",
abstract = "During the last decade zinc oxide (ZnO) has attracted considerable attention as a promising material for electronic, optoelectronic and spintronic devices. ZnO has a wide bandgap (3.37 eV at room temperature) and relatively large exciton binding energy (60 meV) which enables multifunctional application. Until now ZnO-based materials have been used as UV and blue light emitters, varistors, thermistors, semiconductors, photoanodes, and other. Various approaches have been applied to improve functional properties of zinc oxide, such as: fabrication of ZnO-based heterojunction particles, particles’ surface sensitization, hydrogenation, etc. It has been found that intrinsic defects (vacancies, interstitials and antisites) in the crystal structure of a ZnO strongly influenced its electrical and optical properties. Thus, correlation of the intrinsic defects concentration with optical and electrical properties of ZnO materials is of great importance for their further application in opto-electronic devices. In this study we investigated the influence of intrinsic defects concentration on the optical, electrical and photoelectrocatalytic properties of ZnO materials. To obtain ZnO powder with a high concentration of intrinsic defects microwave processing of precipitate was employed, while for further varying of defects concentration, the powder was thermally treated in three different atmospheres: air, argon and oxygen. The ZnO powder was uniaxially pressed (P = 100 MPa) in cylindrical compacts (R= 6 mm and h approx. 3 mm) which were sintered in different atmospheres by heating rate of 10 °/min up to 1100 °C, and with dwell time of 1 h. To study a crystal structure of ZnO samples XRD and Raman spectroscopy were used, while for microstructural investigation field emission scanning electron micrographs were recorded. Optical properties were studied using UV–Vis diffuse reflectance spectroscopy. To reveal the role of intrinsic defects in ZnO crystal lattice on functional properties, XPS, photoluminescence, electroluminescence and electrochemical impedance spectra were analyzed. A detailed analysis of the experimental results imply that a high concentration of intrinsic defects, in particular oxygen vacancies, is of the greatest importance for tunable light-emitting diode application and significant for the photoanode properties. To support our experimental observation we performed ab initio calculations based on density functional theory (DFT).",
publisher = "Budapest : [s. n.]",
journal = "Abstracts / International Workshop on Woman in Ceramic Science (WoCeram2019), April 7-9, 2019/ Budapest, Hungary, Novotel Danube Budapest",
title = "Tuning the optical, electrical and photoelectrocatalytic properties of Zno materials by varying of intrinsic defects concentration",
pages = "11-11",
url = "https://hdl.handle.net/21.15107/rcub_dais_6997"
}
Marković, S., Rajić, V., Veselinović, L., Stojković Simatović, I., Belošević Čavor, J., Škapin, S. D., Kovač, J., Nikolić, M. G.,& Uskoković, D.. (2019). Tuning the optical, electrical and photoelectrocatalytic properties of Zno materials by varying of intrinsic defects concentration. in Abstracts / International Workshop on Woman in Ceramic Science (WoCeram2019), April 7-9, 2019/ Budapest, Hungary, Novotel Danube Budapest
Budapest : [s. n.]., 11-11.
https://hdl.handle.net/21.15107/rcub_dais_6997
Marković S, Rajić V, Veselinović L, Stojković Simatović I, Belošević Čavor J, Škapin SD, Kovač J, Nikolić MG, Uskoković D. Tuning the optical, electrical and photoelectrocatalytic properties of Zno materials by varying of intrinsic defects concentration. in Abstracts / International Workshop on Woman in Ceramic Science (WoCeram2019), April 7-9, 2019/ Budapest, Hungary, Novotel Danube Budapest. 2019;:11-11.
https://hdl.handle.net/21.15107/rcub_dais_6997 .
Marković, Smilja, Rajić, Vladimir, Veselinović, Ljiljana, Stojković Simatović, Ivana, Belošević Čavor, Jelena, Škapin, Srečo Davor, Kovač, Janez, Nikolić, Marko G., Uskoković, Dragan, "Tuning the optical, electrical and photoelectrocatalytic properties of Zno materials by varying of intrinsic defects concentration" in Abstracts / International Workshop on Woman in Ceramic Science (WoCeram2019), April 7-9, 2019/ Budapest, Hungary, Novotel Danube Budapest (2019):11-11,
https://hdl.handle.net/21.15107/rcub_dais_6997 .

Supplementary material to Triethanolamine as an efficient cosolvent for biodiesel production by CaO-catalyzed sunflower oil ethanolysis: An optimization study

Đokić-Stojanović, Dušica R.; Todorović, Zoran B.; Troter, Dragan Z.; Stamenković, Olivera S.; Veselinović, Ljiljana; Zdujić, Miodrag; Manojlović, Dragan D.; Veljković, Vlada B.

(2019)

TY  - DATA
AU  - Đokić-Stojanović, Dušica R.
AU  - Todorović, Zoran B.
AU  - Troter, Dragan Z.
AU  - Stamenković, Olivera S.
AU  - Veselinović, Ljiljana
AU  - Zdujić, Miodrag
AU  - Manojlović, Dragan D.
AU  - Veljković, Vlada B.
PY  - 2019
UR  - https://www.ache-pub.org.rs/index.php/HemInd/article/view/587/pdf_1
UR  - https://dais.sanu.ac.rs/123456789/7043
AB  - Figure D1. Normal probability plot of residuals (a), Cook's distances (b) and predicted and actual values of FAEE content (c); Table D1. Results of sequential model sum of squares test; Table D2. Results of lack of fit test; Table D3. Results of model summary statistics test
T2  - Hemijska industrija
T1  - Supplementary material to Triethanolamine as an efficient cosolvent for biodiesel production by CaO-catalyzed sunflower oil ethanolysis: An optimization study
SP  - D17
EP  - D18
VL  - 73
IS  - 6
UR  - https://hdl.handle.net/21.15107/rcub_dais_7043
ER  - 
@misc{
author = "Đokić-Stojanović, Dušica R. and Todorović, Zoran B. and Troter, Dragan Z. and Stamenković, Olivera S. and Veselinović, Ljiljana and Zdujić, Miodrag and Manojlović, Dragan D. and Veljković, Vlada B.",
year = "2019",
abstract = "Figure D1. Normal probability plot of residuals (a), Cook's distances (b) and predicted and actual values of FAEE content (c); Table D1. Results of sequential model sum of squares test; Table D2. Results of lack of fit test; Table D3. Results of model summary statistics test",
journal = "Hemijska industrija",
title = "Supplementary material to Triethanolamine as an efficient cosolvent for biodiesel production by CaO-catalyzed sunflower oil ethanolysis: An optimization study",
pages = "D17-D18",
volume = "73",
number = "6",
url = "https://hdl.handle.net/21.15107/rcub_dais_7043"
}
Đokić-Stojanović, D. R., Todorović, Z. B., Troter, D. Z., Stamenković, O. S., Veselinović, L., Zdujić, M., Manojlović, D. D.,& Veljković, V. B.. (2019). Supplementary material to Triethanolamine as an efficient cosolvent for biodiesel production by CaO-catalyzed sunflower oil ethanolysis: An optimization study. in Hemijska industrija, 73(6), D17-D18.
https://hdl.handle.net/21.15107/rcub_dais_7043
Đokić-Stojanović DR, Todorović ZB, Troter DZ, Stamenković OS, Veselinović L, Zdujić M, Manojlović DD, Veljković VB. Supplementary material to Triethanolamine as an efficient cosolvent for biodiesel production by CaO-catalyzed sunflower oil ethanolysis: An optimization study. in Hemijska industrija. 2019;73(6):D17-D18.
https://hdl.handle.net/21.15107/rcub_dais_7043 .
Đokić-Stojanović, Dušica R., Todorović, Zoran B., Troter, Dragan Z., Stamenković, Olivera S., Veselinović, Ljiljana, Zdujić, Miodrag, Manojlović, Dragan D., Veljković, Vlada B., "Supplementary material to Triethanolamine as an efficient cosolvent for biodiesel production by CaO-catalyzed sunflower oil ethanolysis: An optimization study" in Hemijska industrija, 73, no. 6 (2019):D17-D18,
https://hdl.handle.net/21.15107/rcub_dais_7043 .

Supplementary data for the article: Todorović, Zoran B., Dragan Z. Troter, Dušica R. Đokić-Stojanović, Ana V. Veličković, Jelena M. Avramović, Olivera S. Stamenković, Ljiljana M. Veselinović, and Vlada B. Veljković. 2019. “Optimization of CaO-Catalyzed Sunflower Oil Methanolysis with Crude Biodiesel as a Cosolvent.” Fuel 237 (February): 903–10. https://doi.org/10.1016/j.fuel.2018.10.056

Todorović, Zoran B.; Troter, Dragan Z.; Đokić-Stojanović, Dušica R.; Veličković, Ana V.; Avramović, Jelena M.; Stamenković, Olivera S.; Veselinović, Ljiljana; Veljković, Vlada B.

(2019)

TY  - DATA
AU  - Todorović, Zoran B.
AU  - Troter, Dragan Z.
AU  - Đokić-Stojanović, Dušica R.
AU  - Veličković, Ana V.
AU  - Avramović, Jelena M.
AU  - Stamenković, Olivera S.
AU  - Veselinović, Ljiljana
AU  - Veljković, Vlada B.
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/4071
AB  - Figure S1. Variation of FAME content during the sunflower oil methanolysis with CaO as a 
catalyst and crude biodiesel as a cosolvent; Figure S2. XRD patterns of the calcined CaO used as a catalyst in combination with different 
amounts of crude biodiesel as a cosolvent. XRD pattern of the calcined CaO not used in the 
reaction was also provided for comparison.
T2  - Fuel
T1  - Supplementary data for the article: Todorović, Zoran B., Dragan Z. Troter, Dušica R. Đokić-Stojanović, Ana V. Veličković, Jelena M. Avramović, Olivera S. Stamenković, Ljiljana M. Veselinović, and Vlada B. Veljković. 2019. “Optimization of CaO-Catalyzed Sunflower Oil Methanolysis with Crude Biodiesel as a Cosolvent.” Fuel 237 (February): 903–10. https://doi.org/10.1016/j.fuel.2018.10.056
UR  - https://hdl.handle.net/21.15107/rcub_dais_4071
ER  - 
@misc{
author = "Todorović, Zoran B. and Troter, Dragan Z. and Đokić-Stojanović, Dušica R. and Veličković, Ana V. and Avramović, Jelena M. and Stamenković, Olivera S. and Veselinović, Ljiljana and Veljković, Vlada B.",
year = "2019",
abstract = "Figure S1. Variation of FAME content during the sunflower oil methanolysis with CaO as a 
catalyst and crude biodiesel as a cosolvent; Figure S2. XRD patterns of the calcined CaO used as a catalyst in combination with different 
amounts of crude biodiesel as a cosolvent. XRD pattern of the calcined CaO not used in the 
reaction was also provided for comparison.",
journal = "Fuel",
title = "Supplementary data for the article: Todorović, Zoran B., Dragan Z. Troter, Dušica R. Đokić-Stojanović, Ana V. Veličković, Jelena M. Avramović, Olivera S. Stamenković, Ljiljana M. Veselinović, and Vlada B. Veljković. 2019. “Optimization of CaO-Catalyzed Sunflower Oil Methanolysis with Crude Biodiesel as a Cosolvent.” Fuel 237 (February): 903–10. https://doi.org/10.1016/j.fuel.2018.10.056",
url = "https://hdl.handle.net/21.15107/rcub_dais_4071"
}
Todorović, Z. B., Troter, D. Z., Đokić-Stojanović, D. R., Veličković, A. V., Avramović, J. M., Stamenković, O. S., Veselinović, L.,& Veljković, V. B.. (2019). Supplementary data for the article: Todorović, Zoran B., Dragan Z. Troter, Dušica R. Đokić-Stojanović, Ana V. Veličković, Jelena M. Avramović, Olivera S. Stamenković, Ljiljana M. Veselinović, and Vlada B. Veljković. 2019. “Optimization of CaO-Catalyzed Sunflower Oil Methanolysis with Crude Biodiesel as a Cosolvent.” Fuel 237 (February): 903–10. https://doi.org/10.1016/j.fuel.2018.10.056. in Fuel.
https://hdl.handle.net/21.15107/rcub_dais_4071
Todorović ZB, Troter DZ, Đokić-Stojanović DR, Veličković AV, Avramović JM, Stamenković OS, Veselinović L, Veljković VB. Supplementary data for the article: Todorović, Zoran B., Dragan Z. Troter, Dušica R. Đokić-Stojanović, Ana V. Veličković, Jelena M. Avramović, Olivera S. Stamenković, Ljiljana M. Veselinović, and Vlada B. Veljković. 2019. “Optimization of CaO-Catalyzed Sunflower Oil Methanolysis with Crude Biodiesel as a Cosolvent.” Fuel 237 (February): 903–10. https://doi.org/10.1016/j.fuel.2018.10.056. in Fuel. 2019;.
https://hdl.handle.net/21.15107/rcub_dais_4071 .
Todorović, Zoran B., Troter, Dragan Z., Đokić-Stojanović, Dušica R., Veličković, Ana V., Avramović, Jelena M., Stamenković, Olivera S., Veselinović, Ljiljana, Veljković, Vlada B., "Supplementary data for the article: Todorović, Zoran B., Dragan Z. Troter, Dušica R. Đokić-Stojanović, Ana V. Veličković, Jelena M. Avramović, Olivera S. Stamenković, Ljiljana M. Veselinović, and Vlada B. Veljković. 2019. “Optimization of CaO-Catalyzed Sunflower Oil Methanolysis with Crude Biodiesel as a Cosolvent.” Fuel 237 (February): 903–10. https://doi.org/10.1016/j.fuel.2018.10.056" in Fuel (2019),
https://hdl.handle.net/21.15107/rcub_dais_4071 .

Triethanolamine as an efficient cosolvent for biodiesel production by CaO-catalyzed sunflower oil ethanolysis: An optimization study

Đokić-Stojanović, Dušica R.; Todorović, Zoran B.; Troter, Dragan Z.; Stamenković, Olivera S.; Veselinović, Ljiljana; Zdujić, Miodrag; Manojlović, Dragan D.; Veljković, Vlada B.

(2019)

TY  - JOUR
AU  - Đokić-Stojanović, Dušica R.
AU  - Todorović, Zoran B.
AU  - Troter, Dragan Z.
AU  - Stamenković, Olivera S.
AU  - Veselinović, Ljiljana
AU  - Zdujić, Miodrag
AU  - Manojlović, Dragan D.
AU  - Veljković, Vlada B.
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/7041
AB  - Triethanolamine was applied as an efficient „green“ cosolvent for biodiesel production by CaO-catalyzed ethanolysis of sunflower oil. The reaction was conducted in a batch stirred reactor and optimized with respect to the reaction temperature (61.6-78.4 °C), the ethanol-to-oil molar ratio (7:1-17:1) and the cosolvent loading (3-36 % of the oil weight) by using a rotatable central composite design (RCCD) combined with the response surface methodology (RSM). The optimal reaction conditions were found to be: the ethanol-to-oil molar ratio of 9:1, the reaction temperature of 75 °C and the cosolvent loading of 30 % to oil weight, which resulted in the predicted and actual fatty acid ethyl ester (FAEE) contents of 98.8 % and 97.9±1.3 %, respectively, achieved within only 20 min of the reaction. Also, high FAEE contents were obtained with expired sunflower oil, hempseed oil and waste lard. X-ray diffraction analysis (XRD) was used to understand the changes in the CaO phase. The CaO catalyst can be used without any treatment in two consecutive cycles. Due to the calcium leaching into the product, an additional purification stage must be included in the overall process.
T2  - Hemijska industrija
T1  - Triethanolamine as an efficient cosolvent for biodiesel production by CaO-catalyzed sunflower oil ethanolysis: An optimization study
SP  - 351
EP  - 362
VL  - 73
IS  - 6
DO  - 10.2298/HEMIND190822033D
UR  - https://hdl.handle.net/21.15107/rcub_dais_7041
ER  - 
@article{
author = "Đokić-Stojanović, Dušica R. and Todorović, Zoran B. and Troter, Dragan Z. and Stamenković, Olivera S. and Veselinović, Ljiljana and Zdujić, Miodrag and Manojlović, Dragan D. and Veljković, Vlada B.",
year = "2019",
abstract = "Triethanolamine was applied as an efficient „green“ cosolvent for biodiesel production by CaO-catalyzed ethanolysis of sunflower oil. The reaction was conducted in a batch stirred reactor and optimized with respect to the reaction temperature (61.6-78.4 °C), the ethanol-to-oil molar ratio (7:1-17:1) and the cosolvent loading (3-36 % of the oil weight) by using a rotatable central composite design (RCCD) combined with the response surface methodology (RSM). The optimal reaction conditions were found to be: the ethanol-to-oil molar ratio of 9:1, the reaction temperature of 75 °C and the cosolvent loading of 30 % to oil weight, which resulted in the predicted and actual fatty acid ethyl ester (FAEE) contents of 98.8 % and 97.9±1.3 %, respectively, achieved within only 20 min of the reaction. Also, high FAEE contents were obtained with expired sunflower oil, hempseed oil and waste lard. X-ray diffraction analysis (XRD) was used to understand the changes in the CaO phase. The CaO catalyst can be used without any treatment in two consecutive cycles. Due to the calcium leaching into the product, an additional purification stage must be included in the overall process.",
journal = "Hemijska industrija",
title = "Triethanolamine as an efficient cosolvent for biodiesel production by CaO-catalyzed sunflower oil ethanolysis: An optimization study",
pages = "351-362",
volume = "73",
number = "6",
doi = "10.2298/HEMIND190822033D",
url = "https://hdl.handle.net/21.15107/rcub_dais_7041"
}
Đokić-Stojanović, D. R., Todorović, Z. B., Troter, D. Z., Stamenković, O. S., Veselinović, L., Zdujić, M., Manojlović, D. D.,& Veljković, V. B.. (2019). Triethanolamine as an efficient cosolvent for biodiesel production by CaO-catalyzed sunflower oil ethanolysis: An optimization study. in Hemijska industrija, 73(6), 351-362.
https://doi.org/10.2298/HEMIND190822033D
https://hdl.handle.net/21.15107/rcub_dais_7041
Đokić-Stojanović DR, Todorović ZB, Troter DZ, Stamenković OS, Veselinović L, Zdujić M, Manojlović DD, Veljković VB. Triethanolamine as an efficient cosolvent for biodiesel production by CaO-catalyzed sunflower oil ethanolysis: An optimization study. in Hemijska industrija. 2019;73(6):351-362.
doi:10.2298/HEMIND190822033D
https://hdl.handle.net/21.15107/rcub_dais_7041 .
Đokić-Stojanović, Dušica R., Todorović, Zoran B., Troter, Dragan Z., Stamenković, Olivera S., Veselinović, Ljiljana, Zdujić, Miodrag, Manojlović, Dragan D., Veljković, Vlada B., "Triethanolamine as an efficient cosolvent for biodiesel production by CaO-catalyzed sunflower oil ethanolysis: An optimization study" in Hemijska industrija, 73, no. 6 (2019):351-362,
https://doi.org/10.2298/HEMIND190822033D .,
https://hdl.handle.net/21.15107/rcub_dais_7041 .
2
1

Influence of various cosolvents on the calcium oxide-catalyzed ethanolysis of sunflower oil

Đokić Stojanović, Dušica R.; Todorović, Zoran B.; Troter, Dragan; Stamenković, Olivera S.; Veselinović, Ljiljana; Zdujić, Miodrag; Manojlović, Dragan D.; Veljković, Vlada B.

(Belgrade : Serbian Chemical Society, 2019)

TY  - JOUR
AU  - Đokić Stojanović, Dušica R.
AU  - Todorović, Zoran B.
AU  - Troter, Dragan
AU  - Stamenković, Olivera S.
AU  - Veselinović, Ljiljana
AU  - Zdujić, Miodrag
AU  - Manojlović, Dragan D.
AU  - Veljković, Vlada B.
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/6183
AB  - Ten organic solvents (triethanolamine, diethanolamine, ethylene glycol, methyl ethyl ketone, n-hexane, triethylamine, ethylene glycol dimethyl ether, glycerol, tetrahydrofuran and dioxane) were applied as cosolvents in the CaO-catalyzed ethanolysis of sunflower oil performed in a batch stirred reactor under the following reaction conditions: temperature 70 °C, ethanol-to-oil mole ratio 12:1, initial catalyst concentration 1.374 mol·L -1 and amount of cosolvent 20 % based on the oil amount. The main goals were to assess the effect of the used cosolvents on the synthesis of fatty acid ethyl esters (FAEE) and to select the most efficient one with respect to the final FAEE content, reaction duration and safety profile. In the absence of any cosolvent, the reaction was rather slow, providing a FAEE content of only 89.7±1.7 % after 4 h. Of the tested cosolvents, diethanolamine, triethanolamine and ethylene glycol significantly accelerated the ethanolysis reaction, whereby the last two provided a final FAEE content of 93.1±2.1 and 94.1±1.5 %, respectively, within 0.5 h. However, because of its safety profile, triethanolamine was selected as the best cosolvent for the ethanolysis of sunflower oil catalyzed by calcined CaO.
PB  - Belgrade : Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Influence of various cosolvents on the calcium oxide-catalyzed ethanolysis of sunflower oil
SP  - 253
EP  - 265
VL  - 84
IS  - 3
DO  - 10.2298/JSC180827007D
UR  - https://hdl.handle.net/21.15107/rcub_dais_6183
ER  - 
@article{
author = "Đokić Stojanović, Dušica R. and Todorović, Zoran B. and Troter, Dragan and Stamenković, Olivera S. and Veselinović, Ljiljana and Zdujić, Miodrag and Manojlović, Dragan D. and Veljković, Vlada B.",
year = "2019",
abstract = "Ten organic solvents (triethanolamine, diethanolamine, ethylene glycol, methyl ethyl ketone, n-hexane, triethylamine, ethylene glycol dimethyl ether, glycerol, tetrahydrofuran and dioxane) were applied as cosolvents in the CaO-catalyzed ethanolysis of sunflower oil performed in a batch stirred reactor under the following reaction conditions: temperature 70 °C, ethanol-to-oil mole ratio 12:1, initial catalyst concentration 1.374 mol·L -1 and amount of cosolvent 20 % based on the oil amount. The main goals were to assess the effect of the used cosolvents on the synthesis of fatty acid ethyl esters (FAEE) and to select the most efficient one with respect to the final FAEE content, reaction duration and safety profile. In the absence of any cosolvent, the reaction was rather slow, providing a FAEE content of only 89.7±1.7 % after 4 h. Of the tested cosolvents, diethanolamine, triethanolamine and ethylene glycol significantly accelerated the ethanolysis reaction, whereby the last two provided a final FAEE content of 93.1±2.1 and 94.1±1.5 %, respectively, within 0.5 h. However, because of its safety profile, triethanolamine was selected as the best cosolvent for the ethanolysis of sunflower oil catalyzed by calcined CaO.",
publisher = "Belgrade : Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Influence of various cosolvents on the calcium oxide-catalyzed ethanolysis of sunflower oil",
pages = "253-265",
volume = "84",
number = "3",
doi = "10.2298/JSC180827007D",
url = "https://hdl.handle.net/21.15107/rcub_dais_6183"
}
Đokić Stojanović, D. R., Todorović, Z. B., Troter, D., Stamenković, O. S., Veselinović, L., Zdujić, M., Manojlović, D. D.,& Veljković, V. B.. (2019). Influence of various cosolvents on the calcium oxide-catalyzed ethanolysis of sunflower oil. in Journal of the Serbian Chemical Society
Belgrade : Serbian Chemical Society., 84(3), 253-265.
https://doi.org/10.2298/JSC180827007D
https://hdl.handle.net/21.15107/rcub_dais_6183
Đokić Stojanović DR, Todorović ZB, Troter D, Stamenković OS, Veselinović L, Zdujić M, Manojlović DD, Veljković VB. Influence of various cosolvents on the calcium oxide-catalyzed ethanolysis of sunflower oil. in Journal of the Serbian Chemical Society. 2019;84(3):253-265.
doi:10.2298/JSC180827007D
https://hdl.handle.net/21.15107/rcub_dais_6183 .
Đokić Stojanović, Dušica R., Todorović, Zoran B., Troter, Dragan, Stamenković, Olivera S., Veselinović, Ljiljana, Zdujić, Miodrag, Manojlović, Dragan D., Veljković, Vlada B., "Influence of various cosolvents on the calcium oxide-catalyzed ethanolysis of sunflower oil" in Journal of the Serbian Chemical Society, 84, no. 3 (2019):253-265,
https://doi.org/10.2298/JSC180827007D .,
https://hdl.handle.net/21.15107/rcub_dais_6183 .
1
2
2

Optimization of CaO-catalyzed sunflower oil methanolysis with crude biodiesel as a cosolvent

Todorović, Zoran B.; Troter, Dragan Z.; Đokić-Stojanović, Dušica R.; Veličković, Ana V.; Avramović, Jelena M.; Stamenković, Olivera S.; Veselinović, Ljiljana; Veljković, Vlada B.

(Elsevier, 2019)

TY  - JOUR
AU  - Todorović, Zoran B.
AU  - Troter, Dragan Z.
AU  - Đokić-Stojanović, Dušica R.
AU  - Veličković, Ana V.
AU  - Avramović, Jelena M.
AU  - Stamenković, Olivera S.
AU  - Veselinović, Ljiljana
AU  - Veljković, Vlada B.
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0016236118317691
UR  - https://dais.sanu.ac.rs/123456789/4070
AB  - Crude biodiesel was proven as a cosolvent in the methanolysis of sunflower oil catalyzed by calcined CaO. This reaction was modeled and optimized statistically in terms of reaction temperature (33.2–66.8 °C), methanol-to-oil molar ratio (3.5:1–8.5:1) and catalyst concentration (0.219–1.065 mol/L). The cosolvent loading was 10 wt% (based on oil weight). The optimum reaction conditions were found to be: the methanol-to-oil molar ratio of 7.1:1, the catalyst concentration of 0.74 mol/L and the reaction temperature 52 °C, ensuring the best esters content of 99.8%, for the reaction time of 1.5 h, which is close to the reported experimental value of 98.9%. Also, the used catalyst was recycled with no additional treatment in the further four consecutive cycles under the following reaction conditions: methanol-to-oil molar ratio 6:1, the concentration of catalyst 0.642 mol/L (only in the first run), the reaction temperature 50 °C, cosolvent-crude biodiesel loading 10 wt% to oil weight. The second recycling reaction provided the highest FAME content of 97.7% after 5 h.
PB  - Elsevier
T2  - Fuel
T1  - Optimization of CaO-catalyzed sunflower oil methanolysis with crude biodiesel as a cosolvent
SP  - 903
EP  - 910
VL  - 237
DO  - 10.1016/j.fuel.2018.10.056
UR  - https://hdl.handle.net/21.15107/rcub_dais_4070
ER  - 
@article{
author = "Todorović, Zoran B. and Troter, Dragan Z. and Đokić-Stojanović, Dušica R. and Veličković, Ana V. and Avramović, Jelena M. and Stamenković, Olivera S. and Veselinović, Ljiljana and Veljković, Vlada B.",
year = "2019",
abstract = "Crude biodiesel was proven as a cosolvent in the methanolysis of sunflower oil catalyzed by calcined CaO. This reaction was modeled and optimized statistically in terms of reaction temperature (33.2–66.8 °C), methanol-to-oil molar ratio (3.5:1–8.5:1) and catalyst concentration (0.219–1.065 mol/L). The cosolvent loading was 10 wt% (based on oil weight). The optimum reaction conditions were found to be: the methanol-to-oil molar ratio of 7.1:1, the catalyst concentration of 0.74 mol/L and the reaction temperature 52 °C, ensuring the best esters content of 99.8%, for the reaction time of 1.5 h, which is close to the reported experimental value of 98.9%. Also, the used catalyst was recycled with no additional treatment in the further four consecutive cycles under the following reaction conditions: methanol-to-oil molar ratio 6:1, the concentration of catalyst 0.642 mol/L (only in the first run), the reaction temperature 50 °C, cosolvent-crude biodiesel loading 10 wt% to oil weight. The second recycling reaction provided the highest FAME content of 97.7% after 5 h.",
publisher = "Elsevier",
journal = "Fuel",
title = "Optimization of CaO-catalyzed sunflower oil methanolysis with crude biodiesel as a cosolvent",
pages = "903-910",
volume = "237",
doi = "10.1016/j.fuel.2018.10.056",
url = "https://hdl.handle.net/21.15107/rcub_dais_4070"
}
Todorović, Z. B., Troter, D. Z., Đokić-Stojanović, D. R., Veličković, A. V., Avramović, J. M., Stamenković, O. S., Veselinović, L.,& Veljković, V. B.. (2019). Optimization of CaO-catalyzed sunflower oil methanolysis with crude biodiesel as a cosolvent. in Fuel
Elsevier., 237, 903-910.
https://doi.org/10.1016/j.fuel.2018.10.056
https://hdl.handle.net/21.15107/rcub_dais_4070
Todorović ZB, Troter DZ, Đokić-Stojanović DR, Veličković AV, Avramović JM, Stamenković OS, Veselinović L, Veljković VB. Optimization of CaO-catalyzed sunflower oil methanolysis with crude biodiesel as a cosolvent. in Fuel. 2019;237:903-910.
doi:10.1016/j.fuel.2018.10.056
https://hdl.handle.net/21.15107/rcub_dais_4070 .
Todorović, Zoran B., Troter, Dragan Z., Đokić-Stojanović, Dušica R., Veličković, Ana V., Avramović, Jelena M., Stamenković, Olivera S., Veselinović, Ljiljana, Veljković, Vlada B., "Optimization of CaO-catalyzed sunflower oil methanolysis with crude biodiesel as a cosolvent" in Fuel, 237 (2019):903-910,
https://doi.org/10.1016/j.fuel.2018.10.056 .,
https://hdl.handle.net/21.15107/rcub_dais_4070 .
24
22
22

Optimization of CaO-catalyzed sunflower oil methanolysis with crude biodiesel as a cosolvent

Todorović, Zoran B.; Troter, Dragan Z.; Đokić Stojanović, Dušica R.; Veličković, Ana V.; Avramović, Jelena M.; Stamenković, Olivera S.; Veselinović, Ljiljana; Veljković, Vlada B.

(Elsevier, 2019)

TY  - JOUR
AU  - Todorović, Zoran B.
AU  - Troter, Dragan Z.
AU  - Đokić Stojanović, Dušica R.
AU  - Veličković, Ana V.
AU  - Avramović, Jelena M.
AU  - Stamenković, Olivera S.
AU  - Veselinović, Ljiljana
AU  - Veljković, Vlada B.
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0016236118317691
UR  - https://dais.sanu.ac.rs/123456789/4069
AB  - Crude biodiesel was proven as a cosolvent in the methanolysis of sunflower oil catalyzed by calcined CaO. This reaction was modeled and optimized statistically in terms of reaction temperature (33.2–66.8 °C), methanol-to-oil molar ratio (3.5:1–8.5:1) and catalyst concentration (0.219–1.065 mol/L). The cosolvent loading was 10 wt% (based on oil weight). The optimum reaction conditions were found to be: the methanol-to-oil molar ratio of 7.1:1, the catalyst concentration of 0.74 mol/L and the reaction temperature 52 °C, ensuring the best esters content of 99.8%, for the reaction time of 1.5 h, which is close to the reported experimental value of 98.9%. Also, the used catalyst was recycled with no additional treatment in the further four consecutive cycles under the following reaction conditions: methanol-to-oil molar ratio 6:1, the concentration of catalyst 0.642 mol/L (only in the first run), the reaction temperature 50 °C, cosolvent-crude biodiesel loading 10 wt% to oil weight. The second recycling reaction provided the highest FAME content of 97.7% after 5 h.
PB  - Elsevier
T2  - Fuel
T1  - Optimization of CaO-catalyzed sunflower oil methanolysis with crude biodiesel as a cosolvent
SP  - 903
EP  - 910
VL  - 237
DO  - 10.1016/j.fuel.2018.10.056
UR  - https://hdl.handle.net/21.15107/rcub_dais_4069
ER  - 
@article{
author = "Todorović, Zoran B. and Troter, Dragan Z. and Đokić Stojanović, Dušica R. and Veličković, Ana V. and Avramović, Jelena M. and Stamenković, Olivera S. and Veselinović, Ljiljana and Veljković, Vlada B.",
year = "2019",
abstract = "Crude biodiesel was proven as a cosolvent in the methanolysis of sunflower oil catalyzed by calcined CaO. This reaction was modeled and optimized statistically in terms of reaction temperature (33.2–66.8 °C), methanol-to-oil molar ratio (3.5:1–8.5:1) and catalyst concentration (0.219–1.065 mol/L). The cosolvent loading was 10 wt% (based on oil weight). The optimum reaction conditions were found to be: the methanol-to-oil molar ratio of 7.1:1, the catalyst concentration of 0.74 mol/L and the reaction temperature 52 °C, ensuring the best esters content of 99.8%, for the reaction time of 1.5 h, which is close to the reported experimental value of 98.9%. Also, the used catalyst was recycled with no additional treatment in the further four consecutive cycles under the following reaction conditions: methanol-to-oil molar ratio 6:1, the concentration of catalyst 0.642 mol/L (only in the first run), the reaction temperature 50 °C, cosolvent-crude biodiesel loading 10 wt% to oil weight. The second recycling reaction provided the highest FAME content of 97.7% after 5 h.",
publisher = "Elsevier",
journal = "Fuel",
title = "Optimization of CaO-catalyzed sunflower oil methanolysis with crude biodiesel as a cosolvent",
pages = "903-910",
volume = "237",
doi = "10.1016/j.fuel.2018.10.056",
url = "https://hdl.handle.net/21.15107/rcub_dais_4069"
}
Todorović, Z. B., Troter, D. Z., Đokić Stojanović, D. R., Veličković, A. V., Avramović, J. M., Stamenković, O. S., Veselinović, L.,& Veljković, V. B.. (2019). Optimization of CaO-catalyzed sunflower oil methanolysis with crude biodiesel as a cosolvent. in Fuel
Elsevier., 237, 903-910.
https://doi.org/10.1016/j.fuel.2018.10.056
https://hdl.handle.net/21.15107/rcub_dais_4069
Todorović ZB, Troter DZ, Đokić Stojanović DR, Veličković AV, Avramović JM, Stamenković OS, Veselinović L, Veljković VB. Optimization of CaO-catalyzed sunflower oil methanolysis with crude biodiesel as a cosolvent. in Fuel. 2019;237:903-910.
doi:10.1016/j.fuel.2018.10.056
https://hdl.handle.net/21.15107/rcub_dais_4069 .
Todorović, Zoran B., Troter, Dragan Z., Đokić Stojanović, Dušica R., Veličković, Ana V., Avramović, Jelena M., Stamenković, Olivera S., Veselinović, Ljiljana, Veljković, Vlada B., "Optimization of CaO-catalyzed sunflower oil methanolysis with crude biodiesel as a cosolvent" in Fuel, 237 (2019):903-910,
https://doi.org/10.1016/j.fuel.2018.10.056 .,
https://hdl.handle.net/21.15107/rcub_dais_4069 .
24
22
22

Rare-earth (Gd 3+ ,Yb 3+ /Tm 3+ , Eu 3+ ) co-doped hydroxyapatite as magnetic, up-conversion and down-conversion materials for multimodal imaging

Ignjatović, Nenad; Mančić, Lidija; Vuković, Marina; Stojanović, Zoran S.; Nikolić, Marko G.; Škapin, Srečo Davor; Jovanović, Sonja; Veselinović, Ljiljana; Uskoković, Vuk; Lazić, Snežana; Marković, Smilja; Lazarević, Miloš M.; Uskoković, Dragan

(Springer Nature, 2019)

TY  - JOUR
AU  - Ignjatović, Nenad
AU  - Mančić, Lidija
AU  - Vuković, Marina
AU  - Stojanović, Zoran S.
AU  - Nikolić, Marko G.
AU  - Škapin, Srečo Davor
AU  - Jovanović, Sonja
AU  - Veselinović, Ljiljana
AU  - Uskoković, Vuk
AU  - Lazić, Snežana
AU  - Marković, Smilja
AU  - Lazarević, Miloš M.
AU  - Uskoković, Dragan
PY  - 2019
UR  - https://www.nature.com/articles/s41598-019-52885-0
UR  - https://dais.sanu.ac.rs/123456789/6950
AB  - Taking advantage of the flexibility of the apatite structure, nano- and micro-particles of hydroxyapatite (HAp) were doped with different combinations of rare earth ions (RE3+ = Gd, Eu, Yb, Tm) to achieve a synergy among their magnetic and optical properties and to enable their application in preventive medicine, particularly diagnostics based on multimodal imaging. All powders were synthesized through hydrothermal processing at T ≤ 200 °C. An X-ray powder diffraction analysis showed that all powders crystallized in P63/m space group of the hexagonal crystal structure. The refined unit-cell parameters reflected a decrease in the unit cell volume as a result of the partial substitution of Ca2+ with smaller RE3+ ions at both cation positions. The FTIR analysis additionally suggested that a synergy may exist solely in the triply doped system, where the lattice symmetry and vibration modes become more coherent than in the singly or doubly doped systems. HAp:RE3+ optical characterization revealed a change in the energy band gap and the appearance of a weak blue luminescence (λex = 370 nm) due to an increased concentration of defects. The “up”- and the “down”-conversion spectra of HAp:Gd/Yb/Tm and HAp:Gd/Eu powders showed characteristic transitions of Tm3+ and Eu3+, respectively. Furthermore, in contrast to diamagnetic HAp, all HAp:RE3+ powders exhibited paramagnetic behavior. Cell viability tests of HAp:Gd/Yb/Tm and HAp:Gd/Eu powders in human dental pulp stem cell cultures indicated their good biocompatibility.
PB  - Springer Nature
T2  - Scientific Reports
T1  - Rare-earth (Gd 3+ ,Yb 3+ /Tm 3+ , Eu 3+ ) co-doped hydroxyapatite as magnetic, up-conversion and down-conversion materials for multimodal imaging
SP  - 1
EP  - 15
VL  - 9
IS  - 1
DO  - 10.1038/s41598-019-52885-0
UR  - https://hdl.handle.net/21.15107/rcub_dais_6950
ER  - 
@article{
author = "Ignjatović, Nenad and Mančić, Lidija and Vuković, Marina and Stojanović, Zoran S. and Nikolić, Marko G. and Škapin, Srečo Davor and Jovanović, Sonja and Veselinović, Ljiljana and Uskoković, Vuk and Lazić, Snežana and Marković, Smilja and Lazarević, Miloš M. and Uskoković, Dragan",
year = "2019",
abstract = "Taking advantage of the flexibility of the apatite structure, nano- and micro-particles of hydroxyapatite (HAp) were doped with different combinations of rare earth ions (RE3+ = Gd, Eu, Yb, Tm) to achieve a synergy among their magnetic and optical properties and to enable their application in preventive medicine, particularly diagnostics based on multimodal imaging. All powders were synthesized through hydrothermal processing at T ≤ 200 °C. An X-ray powder diffraction analysis showed that all powders crystallized in P63/m space group of the hexagonal crystal structure. The refined unit-cell parameters reflected a decrease in the unit cell volume as a result of the partial substitution of Ca2+ with smaller RE3+ ions at both cation positions. The FTIR analysis additionally suggested that a synergy may exist solely in the triply doped system, where the lattice symmetry and vibration modes become more coherent than in the singly or doubly doped systems. HAp:RE3+ optical characterization revealed a change in the energy band gap and the appearance of a weak blue luminescence (λex = 370 nm) due to an increased concentration of defects. The “up”- and the “down”-conversion spectra of HAp:Gd/Yb/Tm and HAp:Gd/Eu powders showed characteristic transitions of Tm3+ and Eu3+, respectively. Furthermore, in contrast to diamagnetic HAp, all HAp:RE3+ powders exhibited paramagnetic behavior. Cell viability tests of HAp:Gd/Yb/Tm and HAp:Gd/Eu powders in human dental pulp stem cell cultures indicated their good biocompatibility.",
publisher = "Springer Nature",
journal = "Scientific Reports",
title = "Rare-earth (Gd 3+ ,Yb 3+ /Tm 3+ , Eu 3+ ) co-doped hydroxyapatite as magnetic, up-conversion and down-conversion materials for multimodal imaging",
pages = "1-15",
volume = "9",
number = "1",
doi = "10.1038/s41598-019-52885-0",
url = "https://hdl.handle.net/21.15107/rcub_dais_6950"
}
Ignjatović, N., Mančić, L., Vuković, M., Stojanović, Z. S., Nikolić, M. G., Škapin, S. D., Jovanović, S., Veselinović, L., Uskoković, V., Lazić, S., Marković, S., Lazarević, M. M.,& Uskoković, D.. (2019). Rare-earth (Gd 3+ ,Yb 3+ /Tm 3+ , Eu 3+ ) co-doped hydroxyapatite as magnetic, up-conversion and down-conversion materials for multimodal imaging. in Scientific Reports
Springer Nature., 9(1), 1-15.
https://doi.org/10.1038/s41598-019-52885-0
https://hdl.handle.net/21.15107/rcub_dais_6950
Ignjatović N, Mančić L, Vuković M, Stojanović ZS, Nikolić MG, Škapin SD, Jovanović S, Veselinović L, Uskoković V, Lazić S, Marković S, Lazarević MM, Uskoković D. Rare-earth (Gd 3+ ,Yb 3+ /Tm 3+ , Eu 3+ ) co-doped hydroxyapatite as magnetic, up-conversion and down-conversion materials for multimodal imaging. in Scientific Reports. 2019;9(1):1-15.
doi:10.1038/s41598-019-52885-0
https://hdl.handle.net/21.15107/rcub_dais_6950 .
Ignjatović, Nenad, Mančić, Lidija, Vuković, Marina, Stojanović, Zoran S., Nikolić, Marko G., Škapin, Srečo Davor, Jovanović, Sonja, Veselinović, Ljiljana, Uskoković, Vuk, Lazić, Snežana, Marković, Smilja, Lazarević, Miloš M., Uskoković, Dragan, "Rare-earth (Gd 3+ ,Yb 3+ /Tm 3+ , Eu 3+ ) co-doped hydroxyapatite as magnetic, up-conversion and down-conversion materials for multimodal imaging" in Scientific Reports, 9, no. 1 (2019):1-15,
https://doi.org/10.1038/s41598-019-52885-0 .,
https://hdl.handle.net/21.15107/rcub_dais_6950 .
1
29
20
29

Hydroxyapatite nano particles doped with Gd3+, Yb3+/Tm3+ and Eu3+ as lumino-magnetic multimodal contrast agents

Ignjatović, Nenad; Mančić, Lidija; Vuković, Marina; Stojanović, Zoran S.; Nikolić, Marko G.; Škapin, Srečo Davor; Jovanović, Sonja; Veselinović, Ljiljana; Lazić, Snežana; Marković, Smilja; Uskoković, Dragan

(Belgrade : Materials Research Society of Serbia, 2019)

TY  - CONF
AU  - Ignjatović, Nenad
AU  - Mančić, Lidija
AU  - Vuković, Marina
AU  - Stojanović, Zoran S.
AU  - Nikolić, Marko G.
AU  - Škapin, Srečo Davor
AU  - Jovanović, Sonja
AU  - Veselinović, Ljiljana
AU  - Lazić, Snežana
AU  - Marković, Smilja
AU  - Uskoković, Dragan
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/6676
AB  - Hydroxyapatite (HAp) has been widely used as bone reconstruction materials due to their similarity to bone tissue. The improvement of HAp properties was achieved by doping its crystal lattice with different ions. Lanthanides, i.e. Rare Earth Elements (RE) are also suitable for doping HAp. The aim of the presented research was to investigate the possibility of creating lumino-magnetic particles of HAp doped with gadolinium (Gd3+) ions and co-doped with ytterbium/thulium (Yb3+/Tm3+) or europium (Eu3+) ions for potential use in multimodal imaging (MI). Pure HAp (Ca5(PO4)3(OH)), magnetic HAp:Gd (Ca4.85Gd0.15(PO4)3(OH)), and lumino-magnetic HAp:Gd/Yb/Tm (Ca4.85Gd0.03Yb0.1Tm0.02(PO4)3(OH)) and HAp:Gd/Eu (Ca4.94Gd0.02Eu0.04(PO4)3(OH)) particles were synthesized using emulsification process and hydrothermal processing. All synthesized particles had an elongated shape and exhibited a paramagnetic behavior. Reduction of the unit cell volume as a result of replacement of Ca2+ ions by ions with a smaller ionic radius (Gd3+, Yb3+, Tm3+, Eu3+) confirmed by using XRD and Rietveld refined plots. The energy band gap values of the synthesized samples range from 4.93 to 3.18 eV and decrease in the following order: HAp:Gd >HAp>HAp:Gd/Eu>HAp:Gd/Yb/Tm. The results of photoluminescence emission spectra of HAp:Gd/Yb/Tm and HAp:Gd/Eu particles showed characteristic transitions of Tm3+ and Eu3+, respectively.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019
T1  - Hydroxyapatite nano particles doped with Gd3+, Yb3+/Tm3+ and Eu3+ as lumino-magnetic multimodal contrast agents
SP  - 76
EP  - 76
UR  - https://hdl.handle.net/21.15107/rcub_dais_6676
ER  - 
@conference{
author = "Ignjatović, Nenad and Mančić, Lidija and Vuković, Marina and Stojanović, Zoran S. and Nikolić, Marko G. and Škapin, Srečo Davor and Jovanović, Sonja and Veselinović, Ljiljana and Lazić, Snežana and Marković, Smilja and Uskoković, Dragan",
year = "2019",
abstract = "Hydroxyapatite (HAp) has been widely used as bone reconstruction materials due to their similarity to bone tissue. The improvement of HAp properties was achieved by doping its crystal lattice with different ions. Lanthanides, i.e. Rare Earth Elements (RE) are also suitable for doping HAp. The aim of the presented research was to investigate the possibility of creating lumino-magnetic particles of HAp doped with gadolinium (Gd3+) ions and co-doped with ytterbium/thulium (Yb3+/Tm3+) or europium (Eu3+) ions for potential use in multimodal imaging (MI). Pure HAp (Ca5(PO4)3(OH)), magnetic HAp:Gd (Ca4.85Gd0.15(PO4)3(OH)), and lumino-magnetic HAp:Gd/Yb/Tm (Ca4.85Gd0.03Yb0.1Tm0.02(PO4)3(OH)) and HAp:Gd/Eu (Ca4.94Gd0.02Eu0.04(PO4)3(OH)) particles were synthesized using emulsification process and hydrothermal processing. All synthesized particles had an elongated shape and exhibited a paramagnetic behavior. Reduction of the unit cell volume as a result of replacement of Ca2+ ions by ions with a smaller ionic radius (Gd3+, Yb3+, Tm3+, Eu3+) confirmed by using XRD and Rietveld refined plots. The energy band gap values of the synthesized samples range from 4.93 to 3.18 eV and decrease in the following order: HAp:Gd >HAp>HAp:Gd/Eu>HAp:Gd/Yb/Tm. The results of photoluminescence emission spectra of HAp:Gd/Yb/Tm and HAp:Gd/Eu particles showed characteristic transitions of Tm3+ and Eu3+, respectively.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019",
title = "Hydroxyapatite nano particles doped with Gd3+, Yb3+/Tm3+ and Eu3+ as lumino-magnetic multimodal contrast agents",
pages = "76-76",
url = "https://hdl.handle.net/21.15107/rcub_dais_6676"
}
Ignjatović, N., Mančić, L., Vuković, M., Stojanović, Z. S., Nikolić, M. G., Škapin, S. D., Jovanović, S., Veselinović, L., Lazić, S., Marković, S.,& Uskoković, D.. (2019). Hydroxyapatite nano particles doped with Gd3+, Yb3+/Tm3+ and Eu3+ as lumino-magnetic multimodal contrast agents. in Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019
Belgrade : Materials Research Society of Serbia., 76-76.
https://hdl.handle.net/21.15107/rcub_dais_6676
Ignjatović N, Mančić L, Vuković M, Stojanović ZS, Nikolić MG, Škapin SD, Jovanović S, Veselinović L, Lazić S, Marković S, Uskoković D. Hydroxyapatite nano particles doped with Gd3+, Yb3+/Tm3+ and Eu3+ as lumino-magnetic multimodal contrast agents. in Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019. 2019;:76-76.
https://hdl.handle.net/21.15107/rcub_dais_6676 .
Ignjatović, Nenad, Mančić, Lidija, Vuković, Marina, Stojanović, Zoran S., Nikolić, Marko G., Škapin, Srečo Davor, Jovanović, Sonja, Veselinović, Ljiljana, Lazić, Snežana, Marković, Smilja, Uskoković, Dragan, "Hydroxyapatite nano particles doped with Gd3+, Yb3+/Tm3+ and Eu3+ as lumino-magnetic multimodal contrast agents" in Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019 (2019):76-76,
https://hdl.handle.net/21.15107/rcub_dais_6676 .

Surfactant-assisted microwave processing of ZnO particles: a simple way for designing the surface-to-bulk defect ratio and improving photo(electro)catalytic properties

Marković, Smilja; Stojković Simatović, Ivana; Ahmetović, Sanita; Veselinović, Ljiljana; Stojadinović, Stevan; Rac, Vladislav; Škapin, Srečo Davor; Bajuk Bogdanović, Danica; Janković Častvan, Ivona; Uskoković, Dragan

(Royal Society of Chemistry, 2019)

TY  - JOUR
AU  - Marković, Smilja
AU  - Stojković Simatović, Ivana
AU  - Ahmetović, Sanita
AU  - Veselinović, Ljiljana
AU  - Stojadinović, Stevan
AU  - Rac, Vladislav
AU  - Škapin, Srečo Davor
AU  - Bajuk Bogdanović, Danica
AU  - Janković Častvan, Ivona
AU  - Uskoković, Dragan
PY  - 2019
UR  - https://pubs.rsc.org/en/content/articlelanding/2019/ra/c9ra02553g
UR  - https://dais.sanu.ac.rs/123456789/6272
AB  - ZnO nanopowders were produced using microwave processing of a precipitate and applied as a photoanode for photoelectrochemical water splitting. Two different surfactants, cetyltrimethylammonium bromide (CTAB) as the cationic and Pluronic F127 as the non-ionic one, were employed to in situ adjust the surface-to-bulk defect ratio in the ZnO crystal structure and further to modify the photo(electro)catalytic activity of the ZnO photoanode. The crystal structure, morphological, textural, optical and photo(electro)catalytic properties of ZnO particles were studied in detail to explain the profound effects of the surfactants on the photoanode activity. The ZnO/CTAB photoanode displayed the highest photocurrent density of 27 mA g−1, compared to ZnO (10.4 mA g−1) and ZnO/F127 photoanodes (20 mA g−1) at 1.5 V vs. SCE in 0.1 M Na2SO4 under visible illumination of 90 mW cm−2. A significant shift of the overpotential toward lower values was also observed when photoanodes were illuminated. The highest shift of the overpotential, from 1.296 to 0.248 V vs. SCE, was recorded when the ZnO/CTAB photanode was illuminated. The ZnO/CTAB photoanode provides efficient charge transfer across the electrode/electrolyte interface, with a longer lifetime of photogenerated electron–hole pairs and reduced possibility of charge recombination. The photoconversion efficiency was improved from 1.4% for ZnO and 0.9% for ZnO/F127 to 4.2% for ZnO/CTAB at 0.510 mV. A simple procedure for the synthesis of ZnO particles with improved photo(electro)catalytic properties was established and it was found that even a small amount of CTAB used during processing of ZnO increases the surface-to-bulk defect ratio. Optimization of the surface-to-bulk defect ratio in ZnO materials enables increase of the absorption capacity for visible light, rendering of the recombination rate of the photogenerated pair, as well as increase of both the photocurrent density and photoconversion efficiency.
PB  - Royal Society of Chemistry
T2  - RSC Advances
T1  - Surfactant-assisted microwave processing of ZnO particles: a simple way for designing the surface-to-bulk defect ratio and improving photo(electro)catalytic properties
SP  - 17165
EP  - 17178
VL  - 9
IS  - 30
DO  - 10.1039/C9RA02553G
UR  - https://hdl.handle.net/21.15107/rcub_dais_6272
ER  - 
@article{
author = "Marković, Smilja and Stojković Simatović, Ivana and Ahmetović, Sanita and Veselinović, Ljiljana and Stojadinović, Stevan and Rac, Vladislav and Škapin, Srečo Davor and Bajuk Bogdanović, Danica and Janković Častvan, Ivona and Uskoković, Dragan",
year = "2019",
abstract = "ZnO nanopowders were produced using microwave processing of a precipitate and applied as a photoanode for photoelectrochemical water splitting. Two different surfactants, cetyltrimethylammonium bromide (CTAB) as the cationic and Pluronic F127 as the non-ionic one, were employed to in situ adjust the surface-to-bulk defect ratio in the ZnO crystal structure and further to modify the photo(electro)catalytic activity of the ZnO photoanode. The crystal structure, morphological, textural, optical and photo(electro)catalytic properties of ZnO particles were studied in detail to explain the profound effects of the surfactants on the photoanode activity. The ZnO/CTAB photoanode displayed the highest photocurrent density of 27 mA g−1, compared to ZnO (10.4 mA g−1) and ZnO/F127 photoanodes (20 mA g−1) at 1.5 V vs. SCE in 0.1 M Na2SO4 under visible illumination of 90 mW cm−2. A significant shift of the overpotential toward lower values was also observed when photoanodes were illuminated. The highest shift of the overpotential, from 1.296 to 0.248 V vs. SCE, was recorded when the ZnO/CTAB photanode was illuminated. The ZnO/CTAB photoanode provides efficient charge transfer across the electrode/electrolyte interface, with a longer lifetime of photogenerated electron–hole pairs and reduced possibility of charge recombination. The photoconversion efficiency was improved from 1.4% for ZnO and 0.9% for ZnO/F127 to 4.2% for ZnO/CTAB at 0.510 mV. A simple procedure for the synthesis of ZnO particles with improved photo(electro)catalytic properties was established and it was found that even a small amount of CTAB used during processing of ZnO increases the surface-to-bulk defect ratio. Optimization of the surface-to-bulk defect ratio in ZnO materials enables increase of the absorption capacity for visible light, rendering of the recombination rate of the photogenerated pair, as well as increase of both the photocurrent density and photoconversion efficiency.",
publisher = "Royal Society of Chemistry",
journal = "RSC Advances",
title = "Surfactant-assisted microwave processing of ZnO particles: a simple way for designing the surface-to-bulk defect ratio and improving photo(electro)catalytic properties",
pages = "17165-17178",
volume = "9",
number = "30",
doi = "10.1039/C9RA02553G",
url = "https://hdl.handle.net/21.15107/rcub_dais_6272"
}
Marković, S., Stojković Simatović, I., Ahmetović, S., Veselinović, L., Stojadinović, S., Rac, V., Škapin, S. D., Bajuk Bogdanović, D., Janković Častvan, I.,& Uskoković, D.. (2019). Surfactant-assisted microwave processing of ZnO particles: a simple way for designing the surface-to-bulk defect ratio and improving photo(electro)catalytic properties. in RSC Advances
Royal Society of Chemistry., 9(30), 17165-17178.
https://doi.org/10.1039/C9RA02553G
https://hdl.handle.net/21.15107/rcub_dais_6272
Marković S, Stojković Simatović I, Ahmetović S, Veselinović L, Stojadinović S, Rac V, Škapin SD, Bajuk Bogdanović D, Janković Častvan I, Uskoković D. Surfactant-assisted microwave processing of ZnO particles: a simple way for designing the surface-to-bulk defect ratio and improving photo(electro)catalytic properties. in RSC Advances. 2019;9(30):17165-17178.
doi:10.1039/C9RA02553G
https://hdl.handle.net/21.15107/rcub_dais_6272 .
Marković, Smilja, Stojković Simatović, Ivana, Ahmetović, Sanita, Veselinović, Ljiljana, Stojadinović, Stevan, Rac, Vladislav, Škapin, Srečo Davor, Bajuk Bogdanović, Danica, Janković Častvan, Ivona, Uskoković, Dragan, "Surfactant-assisted microwave processing of ZnO particles: a simple way for designing the surface-to-bulk defect ratio and improving photo(electro)catalytic properties" in RSC Advances, 9, no. 30 (2019):17165-17178,
https://doi.org/10.1039/C9RA02553G .,
https://hdl.handle.net/21.15107/rcub_dais_6272 .
1
9
11
11

A novel type of building material derived from the by-products of steel making industry

Nikolić, Irena; Milašević, Ivana; Cupara, Nevena; Ivanović, Ljubica; Đurović, Dijana; Marković, Smilja; Veselinović, Ljiljana; Radmilović, Vuk V.; Radmilović, Velimir R.

(Belgrade : Materials Research Society of Serbia, 2019)

TY  - CONF
AU  - Nikolić, Irena
AU  - Milašević, Ivana
AU  - Cupara, Nevena
AU  - Ivanović, Ljubica
AU  - Đurović, Dijana
AU  - Marković, Smilja
AU  - Veselinović, Ljiljana
AU  - Radmilović, Vuk V.
AU  - Radmilović, Velimir R.
PY  - 2019
UR  - https://dais.sanu.ac.rs/123456789/6678
AB  - Electric arc furnace slag (EAFS) and electric arc furnace dust (EAFD) are the waste materials generated during the iron and steel scrap remelting in electric arc furnace. EAFS is non-hazardous material which has found its application in different field of civil engineering. On the other hand, EAFD is classified as hazardous matreials due to the presence of heavy metals (Zn, Pb, Cu Cr and Cd) and their potential leaching into environment. Stabilization/solidification (S/S) of toxic waste is a widely investigated as simply method for production of stable product. Cement binder was mainly used for this purpose but important shift in the use of different waste materials as a cement replacement was observed. The aim of this study was to investigate the possibility of S/S of heavy metals from EAFD using the alkali activated binders based on EAFS. The alkali activated slag with a different content of EAFS was synthesised and characterized using the SEM/EDS, XRDP, FTIR. The binding of Zn into the reaction product of slag alkali activation was founded. The immobilization efficacy was evaluated using TCLP Method No. 1311 (USEPA) and EN 12457-2 (EULFD) leaching tests.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019
T1  - A novel type of building material derived from the by-products of steel making industry
SP  - 84
VL  - 84
UR  - https://hdl.handle.net/21.15107/rcub_dais_6678
ER  - 
@conference{
author = "Nikolić, Irena and Milašević, Ivana and Cupara, Nevena and Ivanović, Ljubica and Đurović, Dijana and Marković, Smilja and Veselinović, Ljiljana and Radmilović, Vuk V. and Radmilović, Velimir R.",
year = "2019",
abstract = "Electric arc furnace slag (EAFS) and electric arc furnace dust (EAFD) are the waste materials generated during the iron and steel scrap remelting in electric arc furnace. EAFS is non-hazardous material which has found its application in different field of civil engineering. On the other hand, EAFD is classified as hazardous matreials due to the presence of heavy metals (Zn, Pb, Cu Cr and Cd) and their potential leaching into environment. Stabilization/solidification (S/S) of toxic waste is a widely investigated as simply method for production of stable product. Cement binder was mainly used for this purpose but important shift in the use of different waste materials as a cement replacement was observed. The aim of this study was to investigate the possibility of S/S of heavy metals from EAFD using the alkali activated binders based on EAFS. The alkali activated slag with a different content of EAFS was synthesised and characterized using the SEM/EDS, XRDP, FTIR. The binding of Zn into the reaction product of slag alkali activation was founded. The immobilization efficacy was evaluated using TCLP Method No. 1311 (USEPA) and EN 12457-2 (EULFD) leaching tests.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019",
title = "A novel type of building material derived from the by-products of steel making industry",
pages = "84",
volume = "84",
url = "https://hdl.handle.net/21.15107/rcub_dais_6678"
}
Nikolić, I., Milašević, I., Cupara, N., Ivanović, L., Đurović, D., Marković, S., Veselinović, L., Radmilović, V. V.,& Radmilović, V. R.. (2019). A novel type of building material derived from the by-products of steel making industry. in Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019
Belgrade : Materials Research Society of Serbia., 84, 84.
https://hdl.handle.net/21.15107/rcub_dais_6678
Nikolić I, Milašević I, Cupara N, Ivanović L, Đurović D, Marković S, Veselinović L, Radmilović VV, Radmilović VR. A novel type of building material derived from the by-products of steel making industry. in Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019. 2019;84:84.
https://hdl.handle.net/21.15107/rcub_dais_6678 .
Nikolić, Irena, Milašević, Ivana, Cupara, Nevena, Ivanović, Ljubica, Đurović, Dijana, Marković, Smilja, Veselinović, Ljiljana, Radmilović, Vuk V., Radmilović, Velimir R., "A novel type of building material derived from the by-products of steel making industry" in Programme and The Book of abstracts / Twenty-first Annual Conference YUCOMAT 2019 & Eleventh World Round Table Conference on Sintering WRTCS 2019, Herceg Novi, Montenegro, September 2-6, 2019, 84 (2019):84,
https://hdl.handle.net/21.15107/rcub_dais_6678 .

Enhanced sorption of Cu2+ from sulfate solutions onto modified electric arc furnace slag

Nikolić, Irena; Marković, Smilja; Veselinović, Ljiljana; Radmilović, Vuk V.; Janković Častvan, Ivona; Radmilović, Velimir R.

(Elsevier, 2019)

TY  - JOUR
AU  - Nikolić, Irena
AU  - Marković, Smilja
AU  - Veselinović, Ljiljana
AU  - Radmilović, Vuk V.
AU  - Janković Častvan, Ivona
AU  - Radmilović, Velimir R.
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0167577X18315908
UR  - https://dais.sanu.ac.rs/123456789/4603
AB  - Pristine electric arc furnace slag (EAFS) as well as EAFS modified by alkali activation i.e. alkali activated slag (AAS) have found a novel application as adsorbents used in Cu2+ removal from sulfate solutions. The adsorption tests were carried in batch conditions and results have shown that alkali activation of EAFS enhances the Cu2+ adsorption. The adsorption process was found to follow a pseudo second-order kinetic model and occurs via formation of posnjakite (Cu4(SO4)(OH)6·H2O) on the surface of both, EAFS and AAS. Enhanced adsorption properties of AAS, compared to EAFS, are attributed to a more porous structure, larger specific surface area and an increased number of surface groups involved in the binding of Cu2+.
PB  - Elsevier
T2  - Materials Letters
T1  - Enhanced sorption of Cu2+ from sulfate solutions onto modified electric arc furnace slag
SP  - 184
EP  - 188
VL  - 235
DO  - 10.1016/j.matlet.2018.10.027
UR  - https://hdl.handle.net/21.15107/rcub_dais_4603
ER  - 
@article{
author = "Nikolić, Irena and Marković, Smilja and Veselinović, Ljiljana and Radmilović, Vuk V. and Janković Častvan, Ivona and Radmilović, Velimir R.",
year = "2019",
abstract = "Pristine electric arc furnace slag (EAFS) as well as EAFS modified by alkali activation i.e. alkali activated slag (AAS) have found a novel application as adsorbents used in Cu2+ removal from sulfate solutions. The adsorption tests were carried in batch conditions and results have shown that alkali activation of EAFS enhances the Cu2+ adsorption. The adsorption process was found to follow a pseudo second-order kinetic model and occurs via formation of posnjakite (Cu4(SO4)(OH)6·H2O) on the surface of both, EAFS and AAS. Enhanced adsorption properties of AAS, compared to EAFS, are attributed to a more porous structure, larger specific surface area and an increased number of surface groups involved in the binding of Cu2+.",
publisher = "Elsevier",
journal = "Materials Letters",
title = "Enhanced sorption of Cu2+ from sulfate solutions onto modified electric arc furnace slag",
pages = "184-188",
volume = "235",
doi = "10.1016/j.matlet.2018.10.027",
url = "https://hdl.handle.net/21.15107/rcub_dais_4603"
}
Nikolić, I., Marković, S., Veselinović, L., Radmilović, V. V., Janković Častvan, I.,& Radmilović, V. R.. (2019). Enhanced sorption of Cu2+ from sulfate solutions onto modified electric arc furnace slag. in Materials Letters
Elsevier., 235, 184-188.
https://doi.org/10.1016/j.matlet.2018.10.027
https://hdl.handle.net/21.15107/rcub_dais_4603
Nikolić I, Marković S, Veselinović L, Radmilović VV, Janković Častvan I, Radmilović VR. Enhanced sorption of Cu2+ from sulfate solutions onto modified electric arc furnace slag. in Materials Letters. 2019;235:184-188.
doi:10.1016/j.matlet.2018.10.027
https://hdl.handle.net/21.15107/rcub_dais_4603 .
Nikolić, Irena, Marković, Smilja, Veselinović, Ljiljana, Radmilović, Vuk V., Janković Častvan, Ivona, Radmilović, Velimir R., "Enhanced sorption of Cu2+ from sulfate solutions onto modified electric arc furnace slag" in Materials Letters, 235 (2019):184-188,
https://doi.org/10.1016/j.matlet.2018.10.027 .,
https://hdl.handle.net/21.15107/rcub_dais_4603 .
1
1
2