TY  - JOUR
AU  - Vujančević, Jelena
AU  - Andričević, Pavao
AU  - Đokić, Veljko
AU  - Blagojević, Vladimir A.
AU  - Pavlović, Vera P.
AU  - Ćirković, Jovana
AU  - Horváth, Endre
AU  - Forró, László
AU  - Karoui, Abdennaceur
AU  - Pavlović, Vladimir B.
AU  - Janaćković, Đorđe
PY  - 2023
UR  - https://dais.sanu.ac.rs/123456789/14229
AB  - In this study, we report the influence of vanadium oxide (VO), as a photosensitive component, on the photoactivity of TiO2 nanotubes (TNTs). A series of TNTs of varying tube diameter were synthesized by the anodization of titanium foils at different voltages, while vanadium oxide was deposited on TNTs by wet chemical deposition. An improvement in the optical properties of nanotubes was observed after the deposition of vanadium oxide. An improvement in the optical properties (redshift in UV-Vis spectra) of TNTs and TNT/VO was noted. The photocatalytic activity was improved with increasing tube diameter, while it was weakened after the deposition of VO. Furthermore, photoactivity was investigated in photodiodes based on TNTs or TNT/VO and single crystals of CH3NH3PbI3. The photoelectric measurement revealed that different TNT diameters did not influence the I-V characteristic of the photodiodes, while the deposition of VO improved the photocurrent for smaller TNTs.
PB  - MDPI
T2  - Catalysts
T1  - Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal
SP  - 352
VL  - 13
IS  - 2
DO  - 10.3390/catal13020352
UR  - https://hdl.handle.net/21.15107/rcub_dais_14229
ER  - 

@article{
author = "Vujančević, Jelena and Andričević, Pavao and Đokić, Veljko and Blagojević, Vladimir A. and Pavlović, Vera P. and Ćirković, Jovana and Horváth, Endre and Forró, László and Karoui, Abdennaceur and Pavlović, Vladimir B. and Janaćković, Đorđe",
year = "2023",
abstract = "In this study, we report the influence of vanadium oxide (VO), as a photosensitive component, on the photoactivity of TiO2 nanotubes (TNTs). A series of TNTs of varying tube diameter were synthesized by the anodization of titanium foils at different voltages, while vanadium oxide was deposited on TNTs by wet chemical deposition. An improvement in the optical properties of nanotubes was observed after the deposition of vanadium oxide. An improvement in the optical properties (redshift in UV-Vis spectra) of TNTs and TNT/VO was noted. The photocatalytic activity was improved with increasing tube diameter, while it was weakened after the deposition of VO. Furthermore, photoactivity was investigated in photodiodes based on TNTs or TNT/VO and single crystals of CH3NH3PbI3. The photoelectric measurement revealed that different TNT diameters did not influence the I-V characteristic of the photodiodes, while the deposition of VO improved the photocurrent for smaller TNTs.",
publisher = "MDPI",
journal = "Catalysts",
title = "Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal",
pages = "352",
volume = "13",
number = "2",
doi = "10.3390/catal13020352",
url = "https://hdl.handle.net/21.15107/rcub_dais_14229"
}

Vujančević, J., Andričević, P., Đokić, V., Blagojević, V. A., Pavlović, V. P., Ćirković, J., Horváth, E., Forró, L., Karoui, A., Pavlović, V. B.,& Janaćković, Đ.. (2023). Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal. in Catalysts
MDPI., 13(2), 352.
https://doi.org/10.3390/catal13020352
https://hdl.handle.net/21.15107/rcub_dais_14229

Vujančević J, Andričević P, Đokić V, Blagojević VA, Pavlović VP, Ćirković J, Horváth E, Forró L, Karoui A, Pavlović VB, Janaćković Đ. Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal. in Catalysts. 2023;13(2):352.
doi:10.3390/catal13020352
https://hdl.handle.net/21.15107/rcub_dais_14229 .

Vujančević, Jelena, Andričević, Pavao, Đokić, Veljko, Blagojević, Vladimir A., Pavlović, Vera P., Ćirković, Jovana, Horváth, Endre, Forró, László, Karoui, Abdennaceur, Pavlović, Vladimir B., Janaćković, Đorđe, "Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal" in Catalysts, 13, no. 2 (2023):352,
https://doi.org/10.3390/catal13020352 .,
https://hdl.handle.net/21.15107/rcub_dais_14229 .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Blagojević, Vladimir A.
AU  - Andričević, Pavao
AU  - Pavlović, Vera P.
AU  - Horváth, Endre
AU  - Forró, László
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
AU  - Janaćković, Đorđe
PY  - 2022
UR  - https://dais.sanu.ac.rs/123456789/13627
AB  - The aim of this study was to investigate the influence of the deposition of vanadium oxide epitaxial layer on the photoresponse of TiO2/CH3NH3PbI3 heterojunction. TiO2 nanotube array was synthesized via anodization of titanium foil at three different voltages. After annealing at 450 °C, vanadium oxide was deposited by direct deposition from vanadyl(IV) sulfate solution. Microstructure analysis has been used for the investigation of the influence of different voltages of anodization on tube diameter. Spectroscopy measurements pointed out the red shift in diffusion reflectance spectra after deposition of vanadium oxide. The presence of V5+ oxidation state has been detected on the surface of nanotube arrays by chemical analysis. CH3NH3PbI3 monocrystal was dry pressed on top of the nanotubes in order to make a photodiode. The current-voltage characteristics of the photodiode were recorded and it was observed that the sample with the smallest wall thickness and higher amount of vanadium has the best photocurrent response.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application X New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 26-27. September 2022.
T1  - Characteristic of photodiode based on vanadium oxide-TiO2 nanotubes/CH3NH3PbI3
SP  - 90
EP  - 90
UR  - https://hdl.handle.net/21.15107/rcub_dais_13627
ER  - 

@conference{
author = "Vujančević, Jelena and Blagojević, Vladimir A. and Andričević, Pavao and Pavlović, Vera P. and Horváth, Endre and Forró, László and Vlahović, Branislav and Pavlović, Vladimir B. and Janaćković, Đorđe",
year = "2022",
abstract = "The aim of this study was to investigate the influence of the deposition of vanadium oxide epitaxial layer on the photoresponse of TiO2/CH3NH3PbI3 heterojunction. TiO2 nanotube array was synthesized via anodization of titanium foil at three different voltages. After annealing at 450 °C, vanadium oxide was deposited by direct deposition from vanadyl(IV) sulfate solution. Microstructure analysis has been used for the investigation of the influence of different voltages of anodization on tube diameter. Spectroscopy measurements pointed out the red shift in diffusion reflectance spectra after deposition of vanadium oxide. The presence of V5+ oxidation state has been detected on the surface of nanotube arrays by chemical analysis. CH3NH3PbI3 monocrystal was dry pressed on top of the nanotubes in order to make a photodiode. The current-voltage characteristics of the photodiode were recorded and it was observed that the sample with the smallest wall thickness and higher amount of vanadium has the best photocurrent response.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application X New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 26-27. September 2022.",
title = "Characteristic of photodiode based on vanadium oxide-TiO2 nanotubes/CH3NH3PbI3",
pages = "90-90",
url = "https://hdl.handle.net/21.15107/rcub_dais_13627"
}

Vujančević, J., Blagojević, V. A., Andričević, P., Pavlović, V. P., Horváth, E., Forró, L., Vlahović, B., Pavlović, V. B.,& Janaćković, Đ.. (2022). Characteristic of photodiode based on vanadium oxide-TiO2 nanotubes/CH3NH3PbI3. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application X New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 26-27. September 2022.
Belgrade : Serbian Ceramic Society., 90-90.
https://hdl.handle.net/21.15107/rcub_dais_13627

Vujančević J, Blagojević VA, Andričević P, Pavlović VP, Horváth E, Forró L, Vlahović B, Pavlović VB, Janaćković Đ. Characteristic of photodiode based on vanadium oxide-TiO2 nanotubes/CH3NH3PbI3. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application X New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 26-27. September 2022.. 2022;:90-90.
https://hdl.handle.net/21.15107/rcub_dais_13627 .

Vujančević, Jelena, Blagojević, Vladimir A., Andričević, Pavao, Pavlović, Vera P., Horváth, Endre, Forró, László, Vlahović, Branislav, Pavlović, Vladimir B., Janaćković, Đorđe, "Characteristic of photodiode based on vanadium oxide-TiO2 nanotubes/CH3NH3PbI3" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application X New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 26-27. September 2022. (2022):90-90,
https://hdl.handle.net/21.15107/rcub_dais_13627 .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Ćirković, Jovana
AU  - Horváth, Endre
AU  - Forró, László
AU  - Pavlović, Vladimir B.
AU  - Janaćković, Đorđe
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12347
AB  - TiO2 under UV light generates charge carriers (electrons and holes) that take part in the process of decomposition of pollutants, which is a well-known fact for the past few decades. For this reason, TiO2 is used for photocatalytic purification water and air. Photoactivity of TiO2 depends on the amount of generated charge carriers, and one part of those carriers are lost through the process of recombination. In order to improve photoactivity, it is necessary to speed up transport of electrons and holes. For better and faster charge carrier transport a unidirectional path is desired, which can be obtained by synthesizing 1D morphology. Anodization of titanium foil is a good way to obtain perpendicular nanotubular morphology onto a substrate. Nanotubular morphology can be optimized via operative conditions of anodization: applied voltage, anodization time and type of electrolyte. In this work, TiO2 nanotube arrays were synthesized by anodization of titanium foil at different voltages: 10 V, 15 V, 20 V and 25 V. Based on FESEM (Field Emission Scanning Electron Microscopy) micrographs, the microstructure of nanotubes was analysed and data concerning wall thickness, outer diameter of nanotubes and active surface were considered. Also, the influence of nanotube morphology on optical properties was determined. Results of our research show that the increasement in anodization voltage influenced on the appearance of redshift in the absorption spectrum. The sample synthesized at 20 V showed the highest photocatalytic activity due to the optimal nanotube length and nanotube diameter.
PB  - Belgrade : Innovation Center of Faculty of Mechanical Engineering
C3  - Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia
T1  - Influence of anodization voltage on photocatalztic activity of TiO2 nanotubes
SP  - 23
EP  - 23
UR  - https://hdl.handle.net/21.15107/rcub_dais_12347
ER  - 

@conference{
author = "Vujančević, Jelena and Ćirković, Jovana and Horváth, Endre and Forró, László and Pavlović, Vladimir B. and Janaćković, Đorđe",
year = "2021",
abstract = "TiO2 under UV light generates charge carriers (electrons and holes) that take part in the process of decomposition of pollutants, which is a well-known fact for the past few decades. For this reason, TiO2 is used for photocatalytic purification water and air. Photoactivity of TiO2 depends on the amount of generated charge carriers, and one part of those carriers are lost through the process of recombination. In order to improve photoactivity, it is necessary to speed up transport of electrons and holes. For better and faster charge carrier transport a unidirectional path is desired, which can be obtained by synthesizing 1D morphology. Anodization of titanium foil is a good way to obtain perpendicular nanotubular morphology onto a substrate. Nanotubular morphology can be optimized via operative conditions of anodization: applied voltage, anodization time and type of electrolyte. In this work, TiO2 nanotube arrays were synthesized by anodization of titanium foil at different voltages: 10 V, 15 V, 20 V and 25 V. Based on FESEM (Field Emission Scanning Electron Microscopy) micrographs, the microstructure of nanotubes was analysed and data concerning wall thickness, outer diameter of nanotubes and active surface were considered. Also, the influence of nanotube morphology on optical properties was determined. Results of our research show that the increasement in anodization voltage influenced on the appearance of redshift in the absorption spectrum. The sample synthesized at 20 V showed the highest photocatalytic activity due to the optimal nanotube length and nanotube diameter.",
publisher = "Belgrade : Innovation Center of Faculty of Mechanical Engineering",
journal = "Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia",
title = "Influence of anodization voltage on photocatalztic activity of TiO2 nanotubes",
pages = "23-23",
url = "https://hdl.handle.net/21.15107/rcub_dais_12347"
}

Vujančević, J., Ćirković, J., Horváth, E., Forró, L., Pavlović, V. B.,& Janaćković, Đ.. (2021). Influence of anodization voltage on photocatalztic activity of TiO2 nanotubes. in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia
Belgrade : Innovation Center of Faculty of Mechanical Engineering., 23-23.
https://hdl.handle.net/21.15107/rcub_dais_12347

Vujančević J, Ćirković J, Horváth E, Forró L, Pavlović VB, Janaćković Đ. Influence of anodization voltage on photocatalztic activity of TiO2 nanotubes. in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia. 2021;:23-23.
https://hdl.handle.net/21.15107/rcub_dais_12347 .

Vujančević, Jelena, Ćirković, Jovana, Horváth, Endre, Forró, László, Pavlović, Vladimir B., Janaćković, Đorđe, "Influence of anodization voltage on photocatalztic activity of TiO2 nanotubes" in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia (2021):23-23,
https://hdl.handle.net/21.15107/rcub_dais_12347 .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Blagojević, Vladimir
AU  - Andričević, Pavao
AU  - Pavlović, Vera P.
AU  - Horváth, Endre
AU  - Forró, László
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
AU  - Janaćković, Đorđe
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12398
AB  - The aim of this study was to investigate the influence of vanadium oxide photosensitive surface layer on the photoactivity of TiO2 nanotubes. Nanotube arrays were synthesized by anodization of titanium foil at different voltages, and vanadium-oxide was deposited by wet chemical deposition. Deposition of the vanadium-oxide layer was confirmed by XPS analysis, which provided the chemical composition of the sample surface. Photovoltaic characteristics and photocatalytic performance for photodegradation of methyl orange dye of modified TiO2 nanotubes were correlated with the nanotube morphology (and anodization voltage). Optimal anodization voltage was determined, in conjunction with the deposition of the surface vanadium oxide layer, in order to achieve maximum performance of the modified TiO2 electrodes. This has been correlated with changes in the optical properties of the TiO2 electrodes, the nanotube length and diameter, as they occur with the change in the anodization voltage, as well as the changes in the vanadium-oxide content in the samples, where the vanadium-oxide content was found to be determined by the nanotube morphology. The photovoltaic performance of the optimized modified TiO2 electrode with the surface vanadium-oxide layer was found to be significantly better than both the performance of the corresponding TiO2 electrode, and the performance of all the other TiO2 electrodes included in the study.
PB  - Novi Sad : Faculty of Technology
C3  - Programme and book of abstracts / 14th ECerS Conference for Young Scientists in Ceramics (CYSC-2021), October 20-23, 2021, Novi Sad
T1  - Photoactivity of vanadium oxide TiO2 nanotubes
SP  - 92
EP  - 92
UR  - https://hdl.handle.net/21.15107/rcub_dais_12398
ER  - 

@conference{
author = "Vujančević, Jelena and Blagojević, Vladimir and Andričević, Pavao and Pavlović, Vera P. and Horváth, Endre and Forró, László and Vlahović, Branislav and Pavlović, Vladimir B. and Janaćković, Đorđe",
year = "2021",
abstract = "The aim of this study was to investigate the influence of vanadium oxide photosensitive surface layer on the photoactivity of TiO2 nanotubes. Nanotube arrays were synthesized by anodization of titanium foil at different voltages, and vanadium-oxide was deposited by wet chemical deposition. Deposition of the vanadium-oxide layer was confirmed by XPS analysis, which provided the chemical composition of the sample surface. Photovoltaic characteristics and photocatalytic performance for photodegradation of methyl orange dye of modified TiO2 nanotubes were correlated with the nanotube morphology (and anodization voltage). Optimal anodization voltage was determined, in conjunction with the deposition of the surface vanadium oxide layer, in order to achieve maximum performance of the modified TiO2 electrodes. This has been correlated with changes in the optical properties of the TiO2 electrodes, the nanotube length and diameter, as they occur with the change in the anodization voltage, as well as the changes in the vanadium-oxide content in the samples, where the vanadium-oxide content was found to be determined by the nanotube morphology. The photovoltaic performance of the optimized modified TiO2 electrode with the surface vanadium-oxide layer was found to be significantly better than both the performance of the corresponding TiO2 electrode, and the performance of all the other TiO2 electrodes included in the study.",
publisher = "Novi Sad : Faculty of Technology",
journal = "Programme and book of abstracts / 14th ECerS Conference for Young Scientists in Ceramics (CYSC-2021), October 20-23, 2021, Novi Sad",
title = "Photoactivity of vanadium oxide TiO2 nanotubes",
pages = "92-92",
url = "https://hdl.handle.net/21.15107/rcub_dais_12398"
}

Vujančević, J., Blagojević, V., Andričević, P., Pavlović, V. P., Horváth, E., Forró, L., Vlahović, B., Pavlović, V. B.,& Janaćković, Đ.. (2021). Photoactivity of vanadium oxide TiO2 nanotubes. in Programme and book of abstracts / 14th ECerS Conference for Young Scientists in Ceramics (CYSC-2021), October 20-23, 2021, Novi Sad
Novi Sad : Faculty of Technology., 92-92.
https://hdl.handle.net/21.15107/rcub_dais_12398

Vujančević J, Blagojević V, Andričević P, Pavlović VP, Horváth E, Forró L, Vlahović B, Pavlović VB, Janaćković Đ. Photoactivity of vanadium oxide TiO2 nanotubes. in Programme and book of abstracts / 14th ECerS Conference for Young Scientists in Ceramics (CYSC-2021), October 20-23, 2021, Novi Sad. 2021;:92-92.
https://hdl.handle.net/21.15107/rcub_dais_12398 .

Vujančević, Jelena, Blagojević, Vladimir, Andričević, Pavao, Pavlović, Vera P., Horváth, Endre, Forró, László, Vlahović, Branislav, Pavlović, Vladimir B., Janaćković, Đorđe, "Photoactivity of vanadium oxide TiO2 nanotubes" in Programme and book of abstracts / 14th ECerS Conference for Young Scientists in Ceramics (CYSC-2021), October 20-23, 2021, Novi Sad (2021):92-92,
https://hdl.handle.net/21.15107/rcub_dais_12398 .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Ćirković, Jovana
AU  - Pavlović, Vera P.
AU  - Horváth, Endre
AU  - Forró, László
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - https://dais.sanu.ac.rs/123456789/4722
AB  - Semiconductor TiO2 photocatalysis is a heterogeneous catalysis, where the photons of the sun or artificial light source are activating the catalyst that enters in reactions. The targeted real-world applications are in environmental protection and remediation such as wastewater treatment, air purification and decomposition of harmful organic pollutants. In this talk, I present the synthesis of nanotubular, thin TiO2 coatings with altered morphology and crystallinity made by anodization technique. The influence of the anodization parameters and post-synthesis annealing conditions on the photocatalytic methyl orange dye decomposition was assessed. Different morphology, crystallinity and introducing a dopant into lattice increase electron transport and electron lifetime which further improve photocatalytic activity.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia
T1  - Customizing nanotubular titania for photocatalytic activity
SP  - 77
EP  - 77
UR  - https://hdl.handle.net/21.15107/rcub_dais_4722
ER  - 

@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Ćirković, Jovana and Pavlović, Vera P. and Horváth, Endre and Forró, László and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2018",
abstract = "Semiconductor TiO2 photocatalysis is a heterogeneous catalysis, where the photons of the sun or artificial light source are activating the catalyst that enters in reactions. The targeted real-world applications are in environmental protection and remediation such as wastewater treatment, air purification and decomposition of harmful organic pollutants. In this talk, I present the synthesis of nanotubular, thin TiO2 coatings with altered morphology and crystallinity made by anodization technique. The influence of the anodization parameters and post-synthesis annealing conditions on the photocatalytic methyl orange dye decomposition was assessed. Different morphology, crystallinity and introducing a dopant into lattice increase electron transport and electron lifetime which further improve photocatalytic activity.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia",
title = "Customizing nanotubular titania for photocatalytic activity",
pages = "77-77",
url = "https://hdl.handle.net/21.15107/rcub_dais_4722"
}

Vujančević, J., Bjelajac, A., Ćirković, J., Pavlović, V. P., Horváth, E., Forró, L., Janaćković, Đ.,& Pavlović, V. B.. (2018). Customizing nanotubular titania for photocatalytic activity. in Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 77-77.
https://hdl.handle.net/21.15107/rcub_dais_4722

Vujančević J, Bjelajac A, Ćirković J, Pavlović VP, Horváth E, Forró L, Janaćković Đ, Pavlović VB. Customizing nanotubular titania for photocatalytic activity. in Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia. 2018;:77-77.
https://hdl.handle.net/21.15107/rcub_dais_4722 .

Vujančević, Jelena, Bjelajac, Anđelika, Ćirković, Jovana, Pavlović, Vera P., Horváth, Endre, Forró, László, Janaćković, Đorđe, Pavlović, Vladimir B., "Customizing nanotubular titania for photocatalytic activity" in Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia (2018):77-77,
https://hdl.handle.net/21.15107/rcub_dais_4722 .

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Ćirković, Jovana
AU  - Pavlović, Vera P.
AU  - Horváth, Endre
AU  - Forró, László
AU  - Vlahović, Branislav
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - https://dais.sanu.ac.rs/123456789/4528
AB  - One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the as-anodized amorphous TiO2 nanotube films were sintered at elevated temperatures. The evolution of the morphology was visualized via scanning electron microscopy (SEM), while the crystalline structure was investigated by X-ray diffraction (XRD) and Raman spectroscopy. The chemical composition was studied by X-ray photoelectron spectroscopy (XPS). The effects of crystallinity and morphology of TiO2 nanotube (NTs) films on photocatalytic degradation of methyl orange (MO) in an aqueous solution under UV light irradiation were also investigated. The TiO2 nanotubes sintered at 650°C for 30 min had the highest degree of crystallinity and exhibited the best photocatalytic activity among the studied TiO2 nanotube films. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. OI 172057 and Grant no. III 45019]
PB  - Belgrade : ETRAN
T2  - Science of Sintering
T2  - Science of Sintering
T1  - Structure and photocatalytic properties of sintered TiO2 nanotube arrays
SP  - 39
EP  - 50
VL  - 50
IS  - 1
DO  - 10.2298/SOS1801039V
UR  - https://hdl.handle.net/21.15107/rcub_dais_4528
ER  - 

@article{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Ćirković, Jovana and Pavlović, Vera P. and Horváth, Endre and Forró, László and Vlahović, Branislav and Mitrić, Miodrag and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2018",
abstract = "One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the as-anodized amorphous TiO2 nanotube films were sintered at elevated temperatures. The evolution of the morphology was visualized via scanning electron microscopy (SEM), while the crystalline structure was investigated by X-ray diffraction (XRD) and Raman spectroscopy. The chemical composition was studied by X-ray photoelectron spectroscopy (XPS). The effects of crystallinity and morphology of TiO2 nanotube (NTs) films on photocatalytic degradation of methyl orange (MO) in an aqueous solution under UV light irradiation were also investigated. The TiO2 nanotubes sintered at 650°C for 30 min had the highest degree of crystallinity and exhibited the best photocatalytic activity among the studied TiO2 nanotube films. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. OI 172057 and Grant no. III 45019]",
publisher = "Belgrade : ETRAN",
journal = "Science of Sintering, Science of Sintering",
title = "Structure and photocatalytic properties of sintered TiO2 nanotube arrays",
pages = "39-50",
volume = "50",
number = "1",
doi = "10.2298/SOS1801039V",
url = "https://hdl.handle.net/21.15107/rcub_dais_4528"
}

Vujančević, J., Bjelajac, A., Ćirković, J., Pavlović, V. P., Horváth, E., Forró, L., Vlahović, B., Mitrić, M., Janaćković, Đ.,& Pavlović, V. B.. (2018). Structure and photocatalytic properties of sintered TiO2 nanotube arrays. in Science of Sintering
Belgrade : ETRAN., 50(1), 39-50.
https://doi.org/10.2298/SOS1801039V
https://hdl.handle.net/21.15107/rcub_dais_4528

Vujančević J, Bjelajac A, Ćirković J, Pavlović VP, Horváth E, Forró L, Vlahović B, Mitrić M, Janaćković Đ, Pavlović VB. Structure and photocatalytic properties of sintered TiO2 nanotube arrays. in Science of Sintering. 2018;50(1):39-50.
doi:10.2298/SOS1801039V
https://hdl.handle.net/21.15107/rcub_dais_4528 .

Vujančević, Jelena, Bjelajac, Anđelika, Ćirković, Jovana, Pavlović, Vera P., Horváth, Endre, Forró, László, Vlahović, Branislav, Mitrić, Miodrag, Janaćković, Đorđe, Pavlović, Vladimir B., "Structure and photocatalytic properties of sintered TiO2 nanotube arrays" in Science of Sintering, 50, no. 1 (2018):39-50,
https://doi.org/10.2298/SOS1801039V .,
https://hdl.handle.net/21.15107/rcub_dais_4528 .