Peleš, Adriana

Link to this page

Authority KeyName Variants
a192bd0f-0782-4ab2-a8f8-f71751c5f95e
  • Peleš, Adriana (3)

Author's Bibliography

Electrical properties of isothermally sintered cordierite-based ceramics as function of sintering and activation time

Đorđević, Nataša; Peleš, Adriana; Obradović, Nina; Vlahović, Milica; Mihajlović, Slavica; Martinović, Sanja

(Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS, 2021)

TY  - CONF
AU  - Đorđević, Nataša
AU  - Peleš, Adriana
AU  - Obradović, Nina
AU  - Vlahović, Milica
AU  - Mihajlović, Slavica
AU  - Martinović, Sanja
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12355
AB  - The mechanical activation of the starting mixtures of cordierite (2MgO*2Al2O3*5SiO2) with 5.00 mass % TiO2 was performed in a high energy ball mill during 10-80 min. The applied compaction pressure before the sintering process was 2t/cm2. The sintering process was performed at 1350°C for 2h and 4h in air atmosphere. Scanning electron microscopy was performed to analyze the microstructure of both compacted and sintered samples. Atomic force microscope was used to investigate the surface of the sintered samples. This paper investigates the influence of prolonged sintering time on the densities of the sintered samples, along with electrical properties.
AB  - Mehanička aktivacija početnih smeša kordierita (2MgO*2Al2O3*5SiO2) sa 5.00 mas. % TiO2 izvršena je u visokoenergetskom mlinu sa kuglama tokom 10-80 min. Primenjeni pritisak presovanja pre procesa sinterovanja bio je 2 t/cm2. Proces sinterovanja je izveden na 1350 °C tokom 2h i 4h u vazdušnoj atmosferi. Skenirajuća elektronska mikroskopija je izvršena u cilju analize mikrostrukture presovanih i sinterovanih uzoraka. Za ispitivanje površine sinterovanih uzoraka korišćen je mikroskop atomskih sila. Ovaj rad istražuje uticaj produženog vremena sinterovanja na gustinu sinterovanih uzoraka zajedno sa električnim svojstvima.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS
C3  - Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021
T1  - Electrical properties of isothermally sintered cordierite-based ceramics as function of sintering and activation time
T1  - Električna svojstva izotermski sinterovane keramike na bazi kordierita kao funkcija vremena sinterovanja i aktivacije
SP  - 269
EP  - 272
UR  - https://hdl.handle.net/21.15107/rcub_dais_12355
ER  - 
@conference{
author = "Đorđević, Nataša and Peleš, Adriana and Obradović, Nina and Vlahović, Milica and Mihajlović, Slavica and Martinović, Sanja",
year = "2021",
abstract = "The mechanical activation of the starting mixtures of cordierite (2MgO*2Al2O3*5SiO2) with 5.00 mass % TiO2 was performed in a high energy ball mill during 10-80 min. The applied compaction pressure before the sintering process was 2t/cm2. The sintering process was performed at 1350°C for 2h and 4h in air atmosphere. Scanning electron microscopy was performed to analyze the microstructure of both compacted and sintered samples. Atomic force microscope was used to investigate the surface of the sintered samples. This paper investigates the influence of prolonged sintering time on the densities of the sintered samples, along with electrical properties., Mehanička aktivacija početnih smeša kordierita (2MgO*2Al2O3*5SiO2) sa 5.00 mas. % TiO2 izvršena je u visokoenergetskom mlinu sa kuglama tokom 10-80 min. Primenjeni pritisak presovanja pre procesa sinterovanja bio je 2 t/cm2. Proces sinterovanja je izveden na 1350 °C tokom 2h i 4h u vazdušnoj atmosferi. Skenirajuća elektronska mikroskopija je izvršena u cilju analize mikrostrukture presovanih i sinterovanih uzoraka. Za ispitivanje površine sinterovanih uzoraka korišćen je mikroskop atomskih sila. Ovaj rad istražuje uticaj produženog vremena sinterovanja na gustinu sinterovanih uzoraka zajedno sa električnim svojstvima.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS",
journal = "Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021",
title = "Electrical properties of isothermally sintered cordierite-based ceramics as function of sintering and activation time, Električna svojstva izotermski sinterovane keramike na bazi kordierita kao funkcija vremena sinterovanja i aktivacije",
pages = "269-272",
url = "https://hdl.handle.net/21.15107/rcub_dais_12355"
}
Đorđević, N., Peleš, A., Obradović, N., Vlahović, M., Mihajlović, S.,& Martinović, S.. (2021). Electrical properties of isothermally sintered cordierite-based ceramics as function of sintering and activation time. in Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS., 269-272.
https://hdl.handle.net/21.15107/rcub_dais_12355
Đorđević N, Peleš A, Obradović N, Vlahović M, Mihajlović S, Martinović S. Electrical properties of isothermally sintered cordierite-based ceramics as function of sintering and activation time. in Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021. 2021;:269-272.
https://hdl.handle.net/21.15107/rcub_dais_12355 .
Đorđević, Nataša, Peleš, Adriana, Obradović, Nina, Vlahović, Milica, Mihajlović, Slavica, Martinović, Sanja, "Electrical properties of isothermally sintered cordierite-based ceramics as function of sintering and activation time" in Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021 (2021):269-272,
https://hdl.handle.net/21.15107/rcub_dais_12355 .

Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics

Đorđević, Nataša; Peleš, Adriana; Obradović, Nina; Vlahović, Milica; Mihajlović, Slavica; Martinović, Sanja

(Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS, 2021)

TY  - CONF
AU  - Đorđević, Nataša
AU  - Peleš, Adriana
AU  - Obradović, Nina
AU  - Vlahović, Milica
AU  - Mihajlović, Slavica
AU  - Martinović, Sanja
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12354
AB  - The mechanical activation of the starting mixtures of cordierite (2MgO*2Al2O3*5SiO2) with 5.00 mass % TiO2 was performed in a high energy ball mill during 10-80 min. The applied compaction pressure before the sintering process was 2t/cm2. The sintering process was performed at 1350°C for 2h and 4h in air atmosphere. Scanning electron microscopy was performed to analyze the microstructure of both compacted and sintered samples. Atomic force microscope was used to investigate the surface of the sintered samples. This paper investigates the influence of prolonged sintering time on the densities of the sintered samples, along with electrical properties.
AB  - Mehanička aktivacija početnih smeša kordierita (2MgO*2Al2O3*5SiO2) sa 5.00 mas. % TiO2 izvršena je u visokoenergetskom mlinu sa kuglama tokom 10-80 min. Primenjeni pritisak presovanja pre procesa sinterovanja bio je 2 t/cm2. Proces sinterovanja je izveden na 1350 °C tokom 2h i 4h u vazdušnoj atmosferi. Skenirajuća elektronska mikroskopija je izvršena u cilju analize mikrostrukture presovanih i sinterovanih uzoraka. Za ispitivanje površine sinterovanih uzoraka korišćen je mikroskop atomskih sila. Ovaj rad istražuje uticaj produženog vremena sinterovanja na gustinu sinterovanih uzoraka zajedno sa električnim svojstvima.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS
C3  - Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021
T1  - Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics
T1  - Uticaj vremena sinterovanja na gustinu i SEM analiza kordijeritne keramike
SP  - 265
EP  - 268
UR  - https://hdl.handle.net/21.15107/rcub_dais_12354
ER  - 
@conference{
author = "Đorđević, Nataša and Peleš, Adriana and Obradović, Nina and Vlahović, Milica and Mihajlović, Slavica and Martinović, Sanja",
year = "2021",
abstract = "The mechanical activation of the starting mixtures of cordierite (2MgO*2Al2O3*5SiO2) with 5.00 mass % TiO2 was performed in a high energy ball mill during 10-80 min. The applied compaction pressure before the sintering process was 2t/cm2. The sintering process was performed at 1350°C for 2h and 4h in air atmosphere. Scanning electron microscopy was performed to analyze the microstructure of both compacted and sintered samples. Atomic force microscope was used to investigate the surface of the sintered samples. This paper investigates the influence of prolonged sintering time on the densities of the sintered samples, along with electrical properties., Mehanička aktivacija početnih smeša kordierita (2MgO*2Al2O3*5SiO2) sa 5.00 mas. % TiO2 izvršena je u visokoenergetskom mlinu sa kuglama tokom 10-80 min. Primenjeni pritisak presovanja pre procesa sinterovanja bio je 2 t/cm2. Proces sinterovanja je izveden na 1350 °C tokom 2h i 4h u vazdušnoj atmosferi. Skenirajuća elektronska mikroskopija je izvršena u cilju analize mikrostrukture presovanih i sinterovanih uzoraka. Za ispitivanje površine sinterovanih uzoraka korišćen je mikroskop atomskih sila. Ovaj rad istražuje uticaj produženog vremena sinterovanja na gustinu sinterovanih uzoraka zajedno sa električnim svojstvima.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS",
journal = "Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021",
title = "Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics, Uticaj vremena sinterovanja na gustinu i SEM analiza kordijeritne keramike",
pages = "265-268",
url = "https://hdl.handle.net/21.15107/rcub_dais_12354"
}
Đorđević, N., Peleš, A., Obradović, N., Vlahović, M., Mihajlović, S.,& Martinović, S.. (2021). Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics. in Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS., 265-268.
https://hdl.handle.net/21.15107/rcub_dais_12354
Đorđević N, Peleš A, Obradović N, Vlahović M, Mihajlović S, Martinović S. Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics. in Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021. 2021;:265-268.
https://hdl.handle.net/21.15107/rcub_dais_12354 .
Đorđević, Nataša, Peleš, Adriana, Obradović, Nina, Vlahović, Milica, Mihajlović, Slavica, Martinović, Sanja, "Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics" in Zbornik radova / 9. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 15. oktobar 2021 = Proceedings / 9th International Conference on Renewable Electrical Power Sources, Belgrade, October 15, 2021 (2021):265-268,
https://hdl.handle.net/21.15107/rcub_dais_12354 .

Measurement of dielectric permitivity using coaxial chambers and electromagnetic-modeling software

Obradović, Nina; Peleš, Adriana; Olćan, Dragan; Fahrenholtz, William G.; Đorđević, Antonije; Pavlović, Vladimir B.

(Belgrade : Innovation Center of Faculty of Mechanical Engineering, 2021)

TY  - CONF
AU  - Obradović, Nina
AU  - Peleš, Adriana
AU  - Olćan, Dragan
AU  - Fahrenholtz, William G.
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/12351
AB  - Our research group has developed a method for measurement of complex relative permittivity of various dielectric materials in the frequency range from around 1 kHz up to several GHz. Material samples have preferably a disk shape. The thicknesses of the samples can be in a wide range, from about 10 μm (thick films) up to several mm. We have designed and manufactured a set of coaxial chambers, which we use as test fixtures. We have also developed two numerical-simulation programs for the electromagnetic analysis of bodies with rotational symmetry. One program is suitable for the low-frequency analysis. It is based on an electrostatic approach. The other program is based on an electrodynamic approach and it is tailored for microwave frequencies. In measurements, we use impedance meters and network analyzers to obtain the input impedance of a chamber with a sample. Thereafter, we implement our software for the electromagnetic modeling to extract the relative permittivity of the measured sample. As examples of verification of our method, we present here results for the relative permittivities of two sets of samples whose sizes are on the extreme limits of the method. The first set comprises poly (vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films, whose relative permittivities are around 1.8. The second set comprises large, high-density samples of spinel (aluminum magnesium oxide) ceramics, sintered under various conditions. The measured relative permittivities of these samples are around 7.5. In all cases, good agreement with other available data has been obtained.
PB  - Belgrade : Innovation Center of Faculty of Mechanical Engineering
C3  - Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia
T1  - Measurement of dielectric permitivity using coaxial chambers and electromagnetic-modeling software
SP  - 82
EP  - 82
UR  - https://hdl.handle.net/21.15107/rcub_dais_12351
ER  - 
@conference{
author = "Obradović, Nina and Peleš, Adriana and Olćan, Dragan and Fahrenholtz, William G. and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2021",
abstract = "Our research group has developed a method for measurement of complex relative permittivity of various dielectric materials in the frequency range from around 1 kHz up to several GHz. Material samples have preferably a disk shape. The thicknesses of the samples can be in a wide range, from about 10 μm (thick films) up to several mm. We have designed and manufactured a set of coaxial chambers, which we use as test fixtures. We have also developed two numerical-simulation programs for the electromagnetic analysis of bodies with rotational symmetry. One program is suitable for the low-frequency analysis. It is based on an electrostatic approach. The other program is based on an electrodynamic approach and it is tailored for microwave frequencies. In measurements, we use impedance meters and network analyzers to obtain the input impedance of a chamber with a sample. Thereafter, we implement our software for the electromagnetic modeling to extract the relative permittivity of the measured sample. As examples of verification of our method, we present here results for the relative permittivities of two sets of samples whose sizes are on the extreme limits of the method. The first set comprises poly (vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films, whose relative permittivities are around 1.8. The second set comprises large, high-density samples of spinel (aluminum magnesium oxide) ceramics, sintered under various conditions. The measured relative permittivities of these samples are around 7.5. In all cases, good agreement with other available data has been obtained.",
publisher = "Belgrade : Innovation Center of Faculty of Mechanical Engineering",
journal = "Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia",
title = "Measurement of dielectric permitivity using coaxial chambers and electromagnetic-modeling software",
pages = "82-82",
url = "https://hdl.handle.net/21.15107/rcub_dais_12351"
}
Obradović, N., Peleš, A., Olćan, D., Fahrenholtz, W. G., Đorđević, A.,& Pavlović, V. B.. (2021). Measurement of dielectric permitivity using coaxial chambers and electromagnetic-modeling software. in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia
Belgrade : Innovation Center of Faculty of Mechanical Engineering., 82-82.
https://hdl.handle.net/21.15107/rcub_dais_12351
Obradović N, Peleš A, Olćan D, Fahrenholtz WG, Đorđević A, Pavlović VB. Measurement of dielectric permitivity using coaxial chambers and electromagnetic-modeling software. in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia. 2021;:82-82.
https://hdl.handle.net/21.15107/rcub_dais_12351 .
Obradović, Nina, Peleš, Adriana, Olćan, Dragan, Fahrenholtz, William G., Đorđević, Antonije, Pavlović, Vladimir B., "Measurement of dielectric permitivity using coaxial chambers and electromagnetic-modeling software" in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021,29 June - 02 July 2021, Zlatibor, Serbia (2021):82-82,
https://hdl.handle.net/21.15107/rcub_dais_12351 .