TY  - JOUR
AU  - Jovanović, Ivana
AU  - Jordović, Branka
AU  - Petković, Marijana
AU  - Ignjatović, Nenad
AU  - Uskoković, Dragan
PY  - 2008
UR  - https://dais.sanu.ac.rs/123456789/177
AB  - Biodegradable microspheres such as those made of poly-D,L-lactide (PDLLA) are widely investigated delivery systems for drugs or antigens. The aim of this study was to examine experimental conditions in order to produce PDLLA microspheres with the best properties for controlled and sustained drug delivery by the modified precipitation method. For this purpose, the following parameters were varied: co-solvent (methanol or ethanol), the concentration of stabilizer polyvinyl alcohol (PVA), chloroform-to-water ratio and the speed and time of homogenization. Scanning electron microscopy (SEM) and stereological analysis were used to characterize the particles. The average size and morphology of the microspheres varied substantially with preparation conditions from 8.44–1.25 μm. Results showed that the smallest particles were obtained with methanol, 1% PVA and with 10 min of homogenization at 21,000 rpm. Microsc. Res. Tech., 2008. © 2007 Wiley-Liss, Inc.
PB  - Hoboken, NJ : John Wiley & Sons
T2  - Microscopy Research and Technique
T1  - Preparation of smallest microparticles of poly-D,L-lactide by modified precipitation method: Influence of the process parameters
SP  - 86
EP  - 92
VL  - 72
IS  - 2
DO  - 10.1002/jemt.20529
UR  - https://hdl.handle.net/21.15107/rcub_dais_177
ER  - 

@article{
author = "Jovanović, Ivana and Jordović, Branka and Petković, Marijana and Ignjatović, Nenad and Uskoković, Dragan",
year = "2008",
abstract = "Biodegradable microspheres such as those made of poly-D,L-lactide (PDLLA) are widely investigated delivery systems for drugs or antigens. The aim of this study was to examine experimental conditions in order to produce PDLLA microspheres with the best properties for controlled and sustained drug delivery by the modified precipitation method. For this purpose, the following parameters were varied: co-solvent (methanol or ethanol), the concentration of stabilizer polyvinyl alcohol (PVA), chloroform-to-water ratio and the speed and time of homogenization. Scanning electron microscopy (SEM) and stereological analysis were used to characterize the particles. The average size and morphology of the microspheres varied substantially with preparation conditions from 8.44–1.25 μm. Results showed that the smallest particles were obtained with methanol, 1% PVA and with 10 min of homogenization at 21,000 rpm. Microsc. Res. Tech., 2008. © 2007 Wiley-Liss, Inc.",
publisher = "Hoboken, NJ : John Wiley & Sons",
journal = "Microscopy Research and Technique",
title = "Preparation of smallest microparticles of poly-D,L-lactide by modified precipitation method: Influence of the process parameters",
pages = "86-92",
volume = "72",
number = "2",
doi = "10.1002/jemt.20529",
url = "https://hdl.handle.net/21.15107/rcub_dais_177"
}

Jovanović, I., Jordović, B., Petković, M., Ignjatović, N.,& Uskoković, D.. (2008). Preparation of smallest microparticles of poly-D,L-lactide by modified precipitation method: Influence of the process parameters. in Microscopy Research and Technique
Hoboken, NJ : John Wiley & Sons., 72(2), 86-92.
https://doi.org/10.1002/jemt.20529
https://hdl.handle.net/21.15107/rcub_dais_177

Jovanović I, Jordović B, Petković M, Ignjatović N, Uskoković D. Preparation of smallest microparticles of poly-D,L-lactide by modified precipitation method: Influence of the process parameters. in Microscopy Research and Technique. 2008;72(2):86-92.
doi:10.1002/jemt.20529
https://hdl.handle.net/21.15107/rcub_dais_177 .

Jovanović, Ivana, Jordović, Branka, Petković, Marijana, Ignjatović, Nenad, Uskoković, Dragan, "Preparation of smallest microparticles of poly-D,L-lactide by modified precipitation method: Influence of the process parameters" in Microscopy Research and Technique, 72, no. 2 (2008):86-92,
https://doi.org/10.1002/jemt.20529 .,
https://hdl.handle.net/21.15107/rcub_dais_177 .

TY  - CONF
AU  - Stevanović, Magdalena
AU  - Jevtić, Marija
AU  - Jovanović, Ivana
AU  - Pavlović, Vladimir B.
AU  - Uskoković, Dragan
PY  - 2008
UR  - https://dais.sanu.ac.rs/123456789/304
AB  - Poster presented at the 10th Conference of the Materials Research Society of Serbia - YUCOMAT 2008, Herceg Novi, Montenegro, September 8-12, 2008.
T1  - Porous, Poly (DL-Lactide-co-Glycolide)-Based Material for Biomedical Application
UR  - https://hdl.handle.net/21.15107/rcub_dais_304
ER  - 

@conference{
author = "Stevanović, Magdalena and Jevtić, Marija and Jovanović, Ivana and Pavlović, Vladimir B. and Uskoković, Dragan",
year = "2008",
abstract = "Poster presented at the 10th Conference of the Materials Research Society of Serbia - YUCOMAT 2008, Herceg Novi, Montenegro, September 8-12, 2008.",
title = "Porous, Poly (DL-Lactide-co-Glycolide)-Based Material for Biomedical Application",
url = "https://hdl.handle.net/21.15107/rcub_dais_304"
}

Stevanović, M., Jevtić, M., Jovanović, I., Pavlović, V. B.,& Uskoković, D.. (2008). Porous, Poly (DL-Lactide-co-Glycolide)-Based Material for Biomedical Application. .
https://hdl.handle.net/21.15107/rcub_dais_304

Stevanović M, Jevtić M, Jovanović I, Pavlović VB, Uskoković D. Porous, Poly (DL-Lactide-co-Glycolide)-Based Material for Biomedical Application. 2008;.
https://hdl.handle.net/21.15107/rcub_dais_304 .

Stevanović, Magdalena, Jevtić, Marija, Jovanović, Ivana, Pavlović, Vladimir B., Uskoković, Dragan, "Porous, Poly (DL-Lactide-co-Glycolide)-Based Material for Biomedical Application" (2008),
https://hdl.handle.net/21.15107/rcub_dais_304 .

TY  - CONF
AU  - Jovanović, Ivana
AU  - Mitrić, Miodrag
AU  - Nedeljković, B.
AU  - Škapin, Srečo Davor
AU  - Ignjatović, Nenad
AU  - Uskoković, Dragan
PY  - 2008
UR  - https://dais.sanu.ac.rs/123456789/300
AB  - Poster presented at the 10th Conference of the Materials Research Society of Serbia - YUCOMAT 2008, Herceg Novi, Crna Gora, 8-12. septembar 2008.
T1  - Preparation and Characterization of Poly-D,L-Lactide Microspheres for Controlled Release of Horseradish Peroxidase as Model Protein
UR  - https://hdl.handle.net/21.15107/rcub_dais_300
ER  - 

@conference{
author = "Jovanović, Ivana and Mitrić, Miodrag and Nedeljković, B. and Škapin, Srečo Davor and Ignjatović, Nenad and Uskoković, Dragan",
year = "2008",
abstract = "Poster presented at the 10th Conference of the Materials Research Society of Serbia - YUCOMAT 2008, Herceg Novi, Crna Gora, 8-12. septembar 2008.",
title = "Preparation and Characterization of Poly-D,L-Lactide Microspheres for Controlled Release of Horseradish Peroxidase as Model Protein",
url = "https://hdl.handle.net/21.15107/rcub_dais_300"
}

Jovanović, I., Mitrić, M., Nedeljković, B., Škapin, S. D., Ignjatović, N.,& Uskoković, D.. (2008). Preparation and Characterization of Poly-D,L-Lactide Microspheres for Controlled Release of Horseradish Peroxidase as Model Protein. .
https://hdl.handle.net/21.15107/rcub_dais_300

Jovanović I, Mitrić M, Nedeljković B, Škapin SD, Ignjatović N, Uskoković D. Preparation and Characterization of Poly-D,L-Lactide Microspheres for Controlled Release of Horseradish Peroxidase as Model Protein. 2008;.
https://hdl.handle.net/21.15107/rcub_dais_300 .

Jovanović, Ivana, Mitrić, Miodrag, Nedeljković, B., Škapin, Srečo Davor, Ignjatović, Nenad, Uskoković, Dragan, "Preparation and Characterization of Poly-D,L-Lactide Microspheres for Controlled Release of Horseradish Peroxidase as Model Protein" (2008),
https://hdl.handle.net/21.15107/rcub_dais_300 .

TY  - CONF
AU  - Jovanović, Ivana
AU  - Mitrić, Miodrag
AU  - Nedeljković, B.
AU  - Škapin, Srečo Davor
AU  - Ignjatović, Nenad
AU  - Uskoković, Dragan
PY  - 2008
UR  - https://dais.sanu.ac.rs/123456789/276
AB  - Poster presented at PHYSICAL CHEMISTRY 2008. 9th International Conference on Fundamental and Applied Aspects of Physical Chemistry, Belgrade, September 24-26, 2008
T1  - Encapsulation of Horseradish Peroxidase into Poly(D,L-Lactide) by the Modified Precipitation Method
UR  - https://hdl.handle.net/21.15107/rcub_dais_276
ER  - 

@conference{
author = "Jovanović, Ivana and Mitrić, Miodrag and Nedeljković, B. and Škapin, Srečo Davor and Ignjatović, Nenad and Uskoković, Dragan",
year = "2008",
abstract = "Poster presented at PHYSICAL CHEMISTRY 2008. 9th International Conference on Fundamental and Applied Aspects of Physical Chemistry, Belgrade, September 24-26, 2008",
title = "Encapsulation of Horseradish Peroxidase into Poly(D,L-Lactide) by the Modified Precipitation Method",
url = "https://hdl.handle.net/21.15107/rcub_dais_276"
}

Jovanović, I., Mitrić, M., Nedeljković, B., Škapin, S. D., Ignjatović, N.,& Uskoković, D.. (2008). Encapsulation of Horseradish Peroxidase into Poly(D,L-Lactide) by the Modified Precipitation Method. .
https://hdl.handle.net/21.15107/rcub_dais_276

Jovanović I, Mitrić M, Nedeljković B, Škapin SD, Ignjatović N, Uskoković D. Encapsulation of Horseradish Peroxidase into Poly(D,L-Lactide) by the Modified Precipitation Method. 2008;.
https://hdl.handle.net/21.15107/rcub_dais_276 .

Jovanović, Ivana, Mitrić, Miodrag, Nedeljković, B., Škapin, Srečo Davor, Ignjatović, Nenad, Uskoković, Dragan, "Encapsulation of Horseradish Peroxidase into Poly(D,L-Lactide) by the Modified Precipitation Method" (2008),
https://hdl.handle.net/21.15107/rcub_dais_276 .

TY  - THES
AU  - Jovanović, Ivana
PY  - 2008
UR  - https://dais.sanu.ac.rs/123456789/97
AB  - U svetu trenutno postoji značajna potreba za otkrićem biodegradabilnih mikro i nanosfera koje se koriste kao sistemi za kontrolisanu dostavu medikamenata. Glavni, ali ne i jedini nedostatak tradicionalnog načina doziranja medikamenata se ogleda u potrebi za čestim ponavljanjem doza. Inkapsulacija je potvrđena kao efektivan način za kontrolisanu dostavu različitih aktivnih supstanci. Zbog svojih atraktivnih svojstava mikrosfere biodegradabilnih polimera poli-L-laktida (PLLA) i poli-D,L-laktida (PDLLA) su našle veliku primenu u mikroinkapsulaciji lekova i antigena sa nerazdvojnim potencijalom za kontrolisanu i ciljanu dostavu lekova i antigena. 
U ovoj magistarskoj tezi je opisano procesiranje čistih i kompozitnih mikrosfera PLLA i PDLLA modifikovanom precipitacionom metodom. Biodegradabilne sfere poli-D,L-laktida su sistemi koji su dosta istraživani u cilju kontrolisane dostave proteina. U ovim istraživanjima rađeno je ispitivanje pojedinih promenljivih parametara procesa kako bi se ispitao njihov uticaj na morfološke karakteristike i distribuciju veličina mikrosfera  PLLA i PDLLA dobijenih precipitacionom metodom. Uslovi pod kojima su procesirane PLLA i PDLLA mikrosfere su dalje optimizovani kako bi se dobile najmanje sfere u kojima je inkorporiran protein. Mikrosfere od PDLLA mogu zaštititi proteine od gubitka biološke aktivnosti i obezbediti otpuštanje proteina u odgovarajućim trenucima tokom produženog vremenskog perioda. U ovom radu, kao model proteini korišćeni su bovin serum albumin (BSA) i peroksidaza iz rena (HRP), koji su inkorporirani u sferama PDLLA. Cilj ovog rada je bio i da se optimizuju eksperimentalni uslovi kako bi se dobile kompozitne mikrosfere sa najboljim karakteristikama koje su neophodne za kontrolisanu dostavu proteina (HRP i BSA) sa produženim dejstvom i izračunala efikasnost inkapsulacije. Sposobnost kontrole veličine sfera bi mogla da olakša istraživanja na polju kontrolisane dostave lekova. U ove svrhe, varirani su sledeći parametri: korastvarač (metanol ili etanol), koncentracija surfaktanta PVA, zapreminski odnos hloroforma prema vodi, kao i brzina i vreme homogenizacije. Morfologija i veličina čestica PLLA, PDLLA i kompozita (PDLLA+BSA i PDLLA +HRP), se značajno menjaju promenom ovih uslova procesiranja. Za karakterizaciju dobijenih prahova korišćene su skenirajuća elektronska mikroskopija (SEM), rendgenska difrakcija (XRD), diferencijalna skanirajuća kalorimetrija (DSC), infracrvena spektroskopija (IR), elektroforeza i stereološka analiza.
AB  - A considerable care is currently paid worldwide to the development of biodegradable microspheres as systems for controlled release of medicaments. The major disadvantage of traditional medicaments administration method is the need for frequent dosage repetition. Encapsulation has been proven to be an effective vehicle for the controlled delivery of various medicaments. The encapsulation efficiency and release kinetics of the medicaments have been found to depend upon the size of the microspheres synthesized. Biodegradable micro- and nanospheres made of poly-l-lactide (PLLA) and poly-dl-lactide (PDLLA) are very potent drug or antigen delivery systems with inherent potential for controlled drug delivery and drug and antigen targeting. 
The objective of this thesis was to formulate empty and composite microspheres from PLLA and PDLLA by modified precipitation method. Biodegradable microspheres such as those made of poly-dl-lactide (PDLLA) are widely investigated delivery systems for proteins. This study investigated the effects of some process variables on the morphology and size distribution of PLLA and PDLLA microspheres prepared by precipitation method. Preparation conditions were then optimized to obtain the smallest protein-loaded spheres. PDLLA microspheres can protect proteins against biological inactivation and can release them at specific moments during the prolonged period of time. For the purpose of this paper, bovine serum albumin (BSA) and horseradish peroxidase (HRP) were used as the model proteins, as they were incorporated into PDLLA spheres. The aim of this study was to optimize experimental conditions in order to produce composite microspheres with the best properties for controlled and sustained delivery of proteins (HRP and BSA). The ability to control size of spheres should facilitate investigations of their scope for drug delivery. For this purpose, the following parameters were varied: co-solvent (methanol or ethanol), the concentration of stabilizer polyvinyl alcohol (PVA), chloroform-to-water ratio as well as the speed and time of homogenization. The average size and morphology of PLLA, PDLLA and composite microspheres (PDLLA+BSA and PDLLA+HRP) vary substantially if these preparation conditions are changed. Scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetery (DSC), infrared spectroscopy (IR), electrophoresis and stereological analysis were used to characterize the particles.
PB  - Belgrade : University of Belgrade, Faculty of Technollogy and Metallurgy
T1  - Dobijanje čistih i kompozitnih prahova od poli-L-laktida i poli-D,L-laktida modifikovanom precipitacionom metodom i njihova karakterizacija
UR  - https://hdl.handle.net/21.15107/rcub_dais_97
ER  - 

@mastersthesis{
author = "Jovanović, Ivana",
year = "2008",
abstract = "U svetu trenutno postoji značajna potreba za otkrićem biodegradabilnih mikro i nanosfera koje se koriste kao sistemi za kontrolisanu dostavu medikamenata. Glavni, ali ne i jedini nedostatak tradicionalnog načina doziranja medikamenata se ogleda u potrebi za čestim ponavljanjem doza. Inkapsulacija je potvrđena kao efektivan način za kontrolisanu dostavu različitih aktivnih supstanci. Zbog svojih atraktivnih svojstava mikrosfere biodegradabilnih polimera poli-L-laktida (PLLA) i poli-D,L-laktida (PDLLA) su našle veliku primenu u mikroinkapsulaciji lekova i antigena sa nerazdvojnim potencijalom za kontrolisanu i ciljanu dostavu lekova i antigena. 
U ovoj magistarskoj tezi je opisano procesiranje čistih i kompozitnih mikrosfera PLLA i PDLLA modifikovanom precipitacionom metodom. Biodegradabilne sfere poli-D,L-laktida su sistemi koji su dosta istraživani u cilju kontrolisane dostave proteina. U ovim istraživanjima rađeno je ispitivanje pojedinih promenljivih parametara procesa kako bi se ispitao njihov uticaj na morfološke karakteristike i distribuciju veličina mikrosfera  PLLA i PDLLA dobijenih precipitacionom metodom. Uslovi pod kojima su procesirane PLLA i PDLLA mikrosfere su dalje optimizovani kako bi se dobile najmanje sfere u kojima je inkorporiran protein. Mikrosfere od PDLLA mogu zaštititi proteine od gubitka biološke aktivnosti i obezbediti otpuštanje proteina u odgovarajućim trenucima tokom produženog vremenskog perioda. U ovom radu, kao model proteini korišćeni su bovin serum albumin (BSA) i peroksidaza iz rena (HRP), koji su inkorporirani u sferama PDLLA. Cilj ovog rada je bio i da se optimizuju eksperimentalni uslovi kako bi se dobile kompozitne mikrosfere sa najboljim karakteristikama koje su neophodne za kontrolisanu dostavu proteina (HRP i BSA) sa produženim dejstvom i izračunala efikasnost inkapsulacije. Sposobnost kontrole veličine sfera bi mogla da olakša istraživanja na polju kontrolisane dostave lekova. U ove svrhe, varirani su sledeći parametri: korastvarač (metanol ili etanol), koncentracija surfaktanta PVA, zapreminski odnos hloroforma prema vodi, kao i brzina i vreme homogenizacije. Morfologija i veličina čestica PLLA, PDLLA i kompozita (PDLLA+BSA i PDLLA +HRP), se značajno menjaju promenom ovih uslova procesiranja. Za karakterizaciju dobijenih prahova korišćene su skenirajuća elektronska mikroskopija (SEM), rendgenska difrakcija (XRD), diferencijalna skanirajuća kalorimetrija (DSC), infracrvena spektroskopija (IR), elektroforeza i stereološka analiza., A considerable care is currently paid worldwide to the development of biodegradable microspheres as systems for controlled release of medicaments. The major disadvantage of traditional medicaments administration method is the need for frequent dosage repetition. Encapsulation has been proven to be an effective vehicle for the controlled delivery of various medicaments. The encapsulation efficiency and release kinetics of the medicaments have been found to depend upon the size of the microspheres synthesized. Biodegradable micro- and nanospheres made of poly-l-lactide (PLLA) and poly-dl-lactide (PDLLA) are very potent drug or antigen delivery systems with inherent potential for controlled drug delivery and drug and antigen targeting. 
The objective of this thesis was to formulate empty and composite microspheres from PLLA and PDLLA by modified precipitation method. Biodegradable microspheres such as those made of poly-dl-lactide (PDLLA) are widely investigated delivery systems for proteins. This study investigated the effects of some process variables on the morphology and size distribution of PLLA and PDLLA microspheres prepared by precipitation method. Preparation conditions were then optimized to obtain the smallest protein-loaded spheres. PDLLA microspheres can protect proteins against biological inactivation and can release them at specific moments during the prolonged period of time. For the purpose of this paper, bovine serum albumin (BSA) and horseradish peroxidase (HRP) were used as the model proteins, as they were incorporated into PDLLA spheres. The aim of this study was to optimize experimental conditions in order to produce composite microspheres with the best properties for controlled and sustained delivery of proteins (HRP and BSA). The ability to control size of spheres should facilitate investigations of their scope for drug delivery. For this purpose, the following parameters were varied: co-solvent (methanol or ethanol), the concentration of stabilizer polyvinyl alcohol (PVA), chloroform-to-water ratio as well as the speed and time of homogenization. The average size and morphology of PLLA, PDLLA and composite microspheres (PDLLA+BSA and PDLLA+HRP) vary substantially if these preparation conditions are changed. Scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetery (DSC), infrared spectroscopy (IR), electrophoresis and stereological analysis were used to characterize the particles.",
publisher = "Belgrade : University of Belgrade, Faculty of Technollogy and Metallurgy",
title = "Dobijanje čistih i kompozitnih prahova od poli-L-laktida i poli-D,L-laktida modifikovanom precipitacionom metodom i njihova karakterizacija",
url = "https://hdl.handle.net/21.15107/rcub_dais_97"
}

Jovanović, I.. (2008). Dobijanje čistih i kompozitnih prahova od poli-L-laktida i poli-D,L-laktida modifikovanom precipitacionom metodom i njihova karakterizacija. 
Belgrade : University of Belgrade, Faculty of Technollogy and Metallurgy..
https://hdl.handle.net/21.15107/rcub_dais_97

Jovanović I. Dobijanje čistih i kompozitnih prahova od poli-L-laktida i poli-D,L-laktida modifikovanom precipitacionom metodom i njihova karakterizacija. 2008;.
https://hdl.handle.net/21.15107/rcub_dais_97 .

Jovanović, Ivana, "Dobijanje čistih i kompozitnih prahova od poli-L-laktida i poli-D,L-laktida modifikovanom precipitacionom metodom i njihova karakterizacija" (2008),
https://hdl.handle.net/21.15107/rcub_dais_97 .

TY  - CONF
AU  - Jovanović, Ivana
AU  - Stevanović, Magdalena
AU  - Nedeljković, Borivoje
AU  - Ignjatović, Nenad
PY  - 2007
UR  - https://www.scientific.net/MSF.555.453
UR  - https://dais.sanu.ac.rs/123456789/15644
AB  - Biodegradable micro- and nanospheres made of poly-l-lactide (PLLA) are very potent drug or antigen delivery systems with inherent potential for drug and antigen targeting. The objective of this study is to formulate modified PLLA microparticles with defined size and shape that can efficiently bind bioactive component. The effects of some process variables on the size distribution of particles prepared by precipitation method are examined. The main focus is to study the effect of co-solvent selection and poly(vinyl alcohol) PVA concentration on the shape and size of the particles. Chlorophorm is used as a solvent. Methanol (MeOH) and ethanol (EtOH) are selected as co-solvents. Motivation for replacing MeOH with EtOH in pharmaceutical applications is explained by less harmful nature of EtOH. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) are used to characterize the particles. Optimal particles are achieved in ethanol and at higher PVA concentration
C3  - Research Trends in Contemporary Materials Science
T1  - The Effect of Processing Parameters on Characteristics of Poly-L-Lactide Microspheres
SP  - 453
EP  - 458
DO  - 10.4028/www.scientific.net/MSF.555.453
UR  - https://hdl.handle.net/21.15107/rcub_dais_15644
ER  - 

@conference{
author = "Jovanović, Ivana and Stevanović, Magdalena and Nedeljković, Borivoje and Ignjatović, Nenad",
year = "2007",
abstract = "Biodegradable micro- and nanospheres made of poly-l-lactide (PLLA) are very potent drug or antigen delivery systems with inherent potential for drug and antigen targeting. The objective of this study is to formulate modified PLLA microparticles with defined size and shape that can efficiently bind bioactive component. The effects of some process variables on the size distribution of particles prepared by precipitation method are examined. The main focus is to study the effect of co-solvent selection and poly(vinyl alcohol) PVA concentration on the shape and size of the particles. Chlorophorm is used as a solvent. Methanol (MeOH) and ethanol (EtOH) are selected as co-solvents. Motivation for replacing MeOH with EtOH in pharmaceutical applications is explained by less harmful nature of EtOH. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) are used to characterize the particles. Optimal particles are achieved in ethanol and at higher PVA concentration",
journal = "Research Trends in Contemporary Materials Science",
title = "The Effect of Processing Parameters on Characteristics of Poly-L-Lactide Microspheres",
pages = "453-458",
doi = "10.4028/www.scientific.net/MSF.555.453",
url = "https://hdl.handle.net/21.15107/rcub_dais_15644"
}

Jovanović, I., Stevanović, M., Nedeljković, B.,& Ignjatović, N.. (2007). The Effect of Processing Parameters on Characteristics of Poly-L-Lactide Microspheres. in Research Trends in Contemporary Materials Science, 453-458.
https://doi.org/10.4028/www.scientific.net/MSF.555.453
https://hdl.handle.net/21.15107/rcub_dais_15644

Jovanović I, Stevanović M, Nedeljković B, Ignjatović N. The Effect of Processing Parameters on Characteristics of Poly-L-Lactide Microspheres. in Research Trends in Contemporary Materials Science. 2007;:453-458.
doi:10.4028/www.scientific.net/MSF.555.453
https://hdl.handle.net/21.15107/rcub_dais_15644 .

Jovanović, Ivana, Stevanović, Magdalena, Nedeljković, Borivoje, Ignjatović, Nenad, "The Effect of Processing Parameters on Characteristics of Poly-L-Lactide Microspheres" in Research Trends in Contemporary Materials Science (2007):453-458,
https://doi.org/10.4028/www.scientific.net/MSF.555.453 .,
https://hdl.handle.net/21.15107/rcub_dais_15644 .

TY  - CONF
AU  - Jovanović, Ivana
AU  - Petković, Marijana
AU  - Jordović, Branka
AU  - Ignjatović, Nenad
AU  - Uskoković, Dragan
PY  - 2007
UR  - https://dais.sanu.ac.rs/123456789/6282
AB  - Worldwide, there is u currently considerable care for the development of
biodegradable microspheres as systems for controlled release of medicaments. The major
disadvantage of traditional administration routes of medicaments is the need for frequent
repetition. Encapsulation has been proven to be an effective vehicle for the controlled delivery
of various medicaments. The encapsulation efficiency and release kinetics of the medicaments
have been found to be dependent upon the size of the microspheres synthesized. The aim of this
study was to formulate microparticles from poly-dl-lactide (PDLLA) by modified precipitation
method. Bovine serum albumin (BSA) was used as a model protein for encapsulation. The
surfactant polyvinyl alcohol (PVA) was incorporated to increase encapsulation efficiency and to
achieve PDLLA spheres with desired size. The main focus was to study the effect of co-solvent
selection (methanol or ethanol), PVA concentration, chloroform-to-water ratio, the speed and
time of homogenization and solvent removal rate on the properties of microparticles. The
average size and morphology of microparticles varied substantially among these preparation
conditions. An increase in stirring rate and time of homogenization and concentration of
stabilizer agent were found to reduce moderately the size of microparticles. Other process
parameters had limited influence on particle size.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Programme and The Book of Abstracts / Ninth Annual Conference YUCOMAT 2007, Herceg Novi, September 10-14, 2007
T1  - PDLLA microparticles containing BSA: effect of formulation variables on size distribution
SP  - 170
EP  - 170
UR  - https://hdl.handle.net/21.15107/rcub_dais_6282
ER  - 

@conference{
author = "Jovanović, Ivana and Petković, Marijana and Jordović, Branka and Ignjatović, Nenad and Uskoković, Dragan",
year = "2007",
abstract = "Worldwide, there is u currently considerable care for the development of
biodegradable microspheres as systems for controlled release of medicaments. The major
disadvantage of traditional administration routes of medicaments is the need for frequent
repetition. Encapsulation has been proven to be an effective vehicle for the controlled delivery
of various medicaments. The encapsulation efficiency and release kinetics of the medicaments
have been found to be dependent upon the size of the microspheres synthesized. The aim of this
study was to formulate microparticles from poly-dl-lactide (PDLLA) by modified precipitation
method. Bovine serum albumin (BSA) was used as a model protein for encapsulation. The
surfactant polyvinyl alcohol (PVA) was incorporated to increase encapsulation efficiency and to
achieve PDLLA spheres with desired size. The main focus was to study the effect of co-solvent
selection (methanol or ethanol), PVA concentration, chloroform-to-water ratio, the speed and
time of homogenization and solvent removal rate on the properties of microparticles. The
average size and morphology of microparticles varied substantially among these preparation
conditions. An increase in stirring rate and time of homogenization and concentration of
stabilizer agent were found to reduce moderately the size of microparticles. Other process
parameters had limited influence on particle size.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Programme and The Book of Abstracts / Ninth Annual Conference YUCOMAT 2007, Herceg Novi, September 10-14, 2007",
title = "PDLLA microparticles containing BSA: effect of formulation variables on size distribution",
pages = "170-170",
url = "https://hdl.handle.net/21.15107/rcub_dais_6282"
}

Jovanović, I., Petković, M., Jordović, B., Ignjatović, N.,& Uskoković, D.. (2007). PDLLA microparticles containing BSA: effect of formulation variables on size distribution. in Programme and The Book of Abstracts / Ninth Annual Conference YUCOMAT 2007, Herceg Novi, September 10-14, 2007
Belgrade : Institute of Technical Sciences of SASA., 170-170.
https://hdl.handle.net/21.15107/rcub_dais_6282

Jovanović I, Petković M, Jordović B, Ignjatović N, Uskoković D. PDLLA microparticles containing BSA: effect of formulation variables on size distribution. in Programme and The Book of Abstracts / Ninth Annual Conference YUCOMAT 2007, Herceg Novi, September 10-14, 2007. 2007;:170-170.
https://hdl.handle.net/21.15107/rcub_dais_6282 .

Jovanović, Ivana, Petković, Marijana, Jordović, Branka, Ignjatović, Nenad, Uskoković, Dragan, "PDLLA microparticles containing BSA: effect of formulation variables on size distribution" in Programme and The Book of Abstracts / Ninth Annual Conference YUCOMAT 2007, Herceg Novi, September 10-14, 2007 (2007):170-170,
https://hdl.handle.net/21.15107/rcub_dais_6282 .

TY  - CONF
AU  - Jovanović, Ivana
AU  - Petković, Marijana
AU  - Joksić, Gordana
AU  - Uskoković, Dragan
PY  - 2007
UR  - https://dais.sanu.ac.rs/123456789/6284
AB  - Particles generated of biodegradable material are extensively investigated as carriers
for sustained drug delivery. Studies have been mainly focused on the monitoring of the drug
release and of the rate of the particle degradation. However, the influence of the carrier particles
on the human immune cells was only rarely addressed. In this work, the influence of the
microparticles made of poly-D,L-lactide (PDLLA) on the function of human lymphocytes in a
three-day culture was investigated. PDLLA microparticles have been prepared by a modified
precipitation method and human lymphocytes were isolated from the blood of healthy volunteers
by a Ficoll – density gradient centrifugation. Lymphocyte proliferation test and the cytochalasin
B micronucleus test were used to assess the PDLLA particle effect on the lymphocytes. Results
showed that PDLLA particles did not influence on the proliferation of the human lymphocytes.
On the other hand, changes in the nuclei form, as well as nucleus buddings were observed.
Moreover, the appearance of micronuclei could be detected. All together, these results might
imply genotoxicity of the PDLLA particles, or some of the chemicals used for the particle
preparation/stabilization on the human lymphocytes.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Programme and The Book of Abstracts / Ninth Annual Conference YUCOMAT 2007, Herceg Novi, September 10-14, 2007
T1  - Genotoxicity of the poly-D,L-lactide microparticles on the human lymphocytes
SP  - 61
EP  - 61
UR  - https://hdl.handle.net/21.15107/rcub_dais_6284
ER  - 

@conference{
author = "Jovanović, Ivana and Petković, Marijana and Joksić, Gordana and Uskoković, Dragan",
year = "2007",
abstract = "Particles generated of biodegradable material are extensively investigated as carriers
for sustained drug delivery. Studies have been mainly focused on the monitoring of the drug
release and of the rate of the particle degradation. However, the influence of the carrier particles
on the human immune cells was only rarely addressed. In this work, the influence of the
microparticles made of poly-D,L-lactide (PDLLA) on the function of human lymphocytes in a
three-day culture was investigated. PDLLA microparticles have been prepared by a modified
precipitation method and human lymphocytes were isolated from the blood of healthy volunteers
by a Ficoll – density gradient centrifugation. Lymphocyte proliferation test and the cytochalasin
B micronucleus test were used to assess the PDLLA particle effect on the lymphocytes. Results
showed that PDLLA particles did not influence on the proliferation of the human lymphocytes.
On the other hand, changes in the nuclei form, as well as nucleus buddings were observed.
Moreover, the appearance of micronuclei could be detected. All together, these results might
imply genotoxicity of the PDLLA particles, or some of the chemicals used for the particle
preparation/stabilization on the human lymphocytes.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Programme and The Book of Abstracts / Ninth Annual Conference YUCOMAT 2007, Herceg Novi, September 10-14, 2007",
title = "Genotoxicity of the poly-D,L-lactide microparticles on the human lymphocytes",
pages = "61-61",
url = "https://hdl.handle.net/21.15107/rcub_dais_6284"
}

Jovanović, I., Petković, M., Joksić, G.,& Uskoković, D.. (2007). Genotoxicity of the poly-D,L-lactide microparticles on the human lymphocytes. in Programme and The Book of Abstracts / Ninth Annual Conference YUCOMAT 2007, Herceg Novi, September 10-14, 2007
Belgrade : Institute of Technical Sciences of SASA., 61-61.
https://hdl.handle.net/21.15107/rcub_dais_6284

Jovanović I, Petković M, Joksić G, Uskoković D. Genotoxicity of the poly-D,L-lactide microparticles on the human lymphocytes. in Programme and The Book of Abstracts / Ninth Annual Conference YUCOMAT 2007, Herceg Novi, September 10-14, 2007. 2007;:61-61.
https://hdl.handle.net/21.15107/rcub_dais_6284 .

Jovanović, Ivana, Petković, Marijana, Joksić, Gordana, Uskoković, Dragan, "Genotoxicity of the poly-D,L-lactide microparticles on the human lymphocytes" in Programme and The Book of Abstracts / Ninth Annual Conference YUCOMAT 2007, Herceg Novi, September 10-14, 2007 (2007):61-61,
https://hdl.handle.net/21.15107/rcub_dais_6284 .

TY  - CONF
AU  - Jovanović, Ivana
AU  - Petković, Marijana
AU  - Vujčić, Zoran
AU  - Uskoković, Dragan
PY  - 2007
UR  - https://dais.sanu.ac.rs/123456789/6275
AB  - U svetu trenutno postoji značajna potreba za otkrićem biodegradabilnih mikrosfera kao sistema za kontrolisanu dostavu medikamenata. Glavni nedostatak tradicionalnog načina doziranja medikamenata se ogleda u potrebi za čestim ponavljanjem doza. Koncentracija, trajanje, i biološka aktivnost farmaceutskih agenata se ne mogu kontrolisati. Kako bi se izbegli ovi problemi osmišljena je tehnologija kontrolisanog otpuštanja. Ideja je bila da se terapeutska koncentracija agenta u telu održava tokom produženog vremenskog perioda, otpuštanjem agenta na predvidljiv i kontrolisan način. Inkapsulacija predstavlja efektivan način za kontrolisanu dostavu različitih medikamenata. Dokazano je da efikasnost inkapsulacije i kinetika otpuštanja medikamenata zavise od veličine sintetisanih mikrosfera. Cilj ovog rada je procesiranje mikrosfera od poli-D,L-laktida (PDLLA) modifikovanom precipitacionom metodom. Goveđi serum albumin (BSA) je korišćen kao model protein za mikroinkapsulaciju. Kao surfaktant je korišćen polivinil alkohol (PVA) kako bi se povećala efikasnost inkapsulacije i kako bi se dobile sfere PDLLA željene veličine. Glavni cilj je bio da se ispita uticaj izbora ko-rastvarača (metanol ili etanol), koncentracije PVA, kao i brzine i vremena homogenizacije na morfološke karakteristike mikročestica. Veličina i morfologija čestica se značajno menjaju promenom ovih uslova procesiranja. Može se videti da se pri većim brzinama homogenizacije, kao i sa većim koncentracijama surfaktanta veličina mikrosfera značajno redukuje. Ostali parametri procesa imaju limitiran uticaj na veličinu čestica.
PB  - Beograd : Institut tehničkih nauka SANU
C3  - Program i knjiga apstrakata / Šesta konferencija mladih istraživača Nauka i inženjerstvo novih materijala, Beograd, 24–26. decembar 2007
T1  - Procesiranje mikrosfera poli-D,L-laktid-a u koje je inkorporiran protein
SP  - 7
EP  - 7
UR  - https://hdl.handle.net/21.15107/rcub_dais_6275
ER  - 

@conference{
author = "Jovanović, Ivana and Petković, Marijana and Vujčić, Zoran and Uskoković, Dragan",
year = "2007",
abstract = "U svetu trenutno postoji značajna potreba za otkrićem biodegradabilnih mikrosfera kao sistema za kontrolisanu dostavu medikamenata. Glavni nedostatak tradicionalnog načina doziranja medikamenata se ogleda u potrebi za čestim ponavljanjem doza. Koncentracija, trajanje, i biološka aktivnost farmaceutskih agenata se ne mogu kontrolisati. Kako bi se izbegli ovi problemi osmišljena je tehnologija kontrolisanog otpuštanja. Ideja je bila da se terapeutska koncentracija agenta u telu održava tokom produženog vremenskog perioda, otpuštanjem agenta na predvidljiv i kontrolisan način. Inkapsulacija predstavlja efektivan način za kontrolisanu dostavu različitih medikamenata. Dokazano je da efikasnost inkapsulacije i kinetika otpuštanja medikamenata zavise od veličine sintetisanih mikrosfera. Cilj ovog rada je procesiranje mikrosfera od poli-D,L-laktida (PDLLA) modifikovanom precipitacionom metodom. Goveđi serum albumin (BSA) je korišćen kao model protein za mikroinkapsulaciju. Kao surfaktant je korišćen polivinil alkohol (PVA) kako bi se povećala efikasnost inkapsulacije i kako bi se dobile sfere PDLLA željene veličine. Glavni cilj je bio da se ispita uticaj izbora ko-rastvarača (metanol ili etanol), koncentracije PVA, kao i brzine i vremena homogenizacije na morfološke karakteristike mikročestica. Veličina i morfologija čestica se značajno menjaju promenom ovih uslova procesiranja. Može se videti da se pri većim brzinama homogenizacije, kao i sa većim koncentracijama surfaktanta veličina mikrosfera značajno redukuje. Ostali parametri procesa imaju limitiran uticaj na veličinu čestica.",
publisher = "Beograd : Institut tehničkih nauka SANU",
journal = "Program i knjiga apstrakata / Šesta konferencija mladih istraživača Nauka i inženjerstvo novih materijala, Beograd, 24–26. decembar 2007",
title = "Procesiranje mikrosfera poli-D,L-laktid-a u koje je inkorporiran protein",
pages = "7-7",
url = "https://hdl.handle.net/21.15107/rcub_dais_6275"
}

Jovanović, I., Petković, M., Vujčić, Z.,& Uskoković, D.. (2007). Procesiranje mikrosfera poli-D,L-laktid-a u koje je inkorporiran protein. in Program i knjiga apstrakata / Šesta konferencija mladih istraživača Nauka i inženjerstvo novih materijala, Beograd, 24–26. decembar 2007
Beograd : Institut tehničkih nauka SANU., 7-7.
https://hdl.handle.net/21.15107/rcub_dais_6275

Jovanović I, Petković M, Vujčić Z, Uskoković D. Procesiranje mikrosfera poli-D,L-laktid-a u koje je inkorporiran protein. in Program i knjiga apstrakata / Šesta konferencija mladih istraživača Nauka i inženjerstvo novih materijala, Beograd, 24–26. decembar 2007. 2007;:7-7.
https://hdl.handle.net/21.15107/rcub_dais_6275 .

Jovanović, Ivana, Petković, Marijana, Vujčić, Zoran, Uskoković, Dragan, "Procesiranje mikrosfera poli-D,L-laktid-a u koje je inkorporiran protein" in Program i knjiga apstrakata / Šesta konferencija mladih istraživača Nauka i inženjerstvo novih materijala, Beograd, 24–26. decembar 2007 (2007):7-7,
https://hdl.handle.net/21.15107/rcub_dais_6275 .

TY  - CONF
AU  - Jovanović, Ivana
AU  - Petković, Marijana
AU  - Vujčić, Zoran
AU  - Jordović, Branka
AU  - Ignjatović, Nenad
AU  - Uskoković, Dragan
PY  - 2007
UR  - https://dais.sanu.ac.rs/123456789/319
AB  - Poster presented at the 9th Conference of the Yugoslav Materials Research Society - YUCOMAT 2007, Herceg Novi, Crna Gora, September 10-14, 2007.
T1  - PDLLA Microparticles Containing BSA: Effect of Formulation Variables on Size Distribution
UR  - https://hdl.handle.net/21.15107/rcub_dais_319
ER  - 

@conference{
author = "Jovanović, Ivana and Petković, Marijana and Vujčić, Zoran and Jordović, Branka and Ignjatović, Nenad and Uskoković, Dragan",
year = "2007",
abstract = "Poster presented at the 9th Conference of the Yugoslav Materials Research Society - YUCOMAT 2007, Herceg Novi, Crna Gora, September 10-14, 2007.",
title = "PDLLA Microparticles Containing BSA: Effect of Formulation Variables on Size Distribution",
url = "https://hdl.handle.net/21.15107/rcub_dais_319"
}

Jovanović, I., Petković, M., Vujčić, Z., Jordović, B., Ignjatović, N.,& Uskoković, D.. (2007). PDLLA Microparticles Containing BSA: Effect of Formulation Variables on Size Distribution. .
https://hdl.handle.net/21.15107/rcub_dais_319

Jovanović I, Petković M, Vujčić Z, Jordović B, Ignjatović N, Uskoković D. PDLLA Microparticles Containing BSA: Effect of Formulation Variables on Size Distribution. 2007;.
https://hdl.handle.net/21.15107/rcub_dais_319 .

Jovanović, Ivana, Petković, Marijana, Vujčić, Zoran, Jordović, Branka, Ignjatović, Nenad, Uskoković, Dragan, "PDLLA Microparticles Containing BSA: Effect of Formulation Variables on Size Distribution" (2007),
https://hdl.handle.net/21.15107/rcub_dais_319 .

TY  - CONF
AU  - Jovanović, Ivana
AU  - Stevanović, Magdalena
AU  - Mitrić, Miodrag
AU  - Jordović, Branka
AU  - Ignjatović, Nenad
AU  - Uskoković, Dragan
PY  - 2006
UR  - https://dais.sanu.ac.rs/123456789/327
AB  - Poster presented at the 8th Conference of Yugoslav Materials Research Society – YUCOMAT 2006, Herceg Novi, Montenegro, September 4-8, 2006.
T1  - The Effect of Processing Parameters on Characteristics of Plla Microspheres
UR  - https://hdl.handle.net/21.15107/rcub_dais_327
ER  - 

@conference{
author = "Jovanović, Ivana and Stevanović, Magdalena and Mitrić, Miodrag and Jordović, Branka and Ignjatović, Nenad and Uskoković, Dragan",
year = "2006",
abstract = "Poster presented at the 8th Conference of Yugoslav Materials Research Society – YUCOMAT 2006, Herceg Novi, Montenegro, September 4-8, 2006.",
title = "The Effect of Processing Parameters on Characteristics of Plla Microspheres",
url = "https://hdl.handle.net/21.15107/rcub_dais_327"
}

Jovanović, I., Stevanović, M., Mitrić, M., Jordović, B., Ignjatović, N.,& Uskoković, D.. (2006). The Effect of Processing Parameters on Characteristics of Plla Microspheres. .
https://hdl.handle.net/21.15107/rcub_dais_327

Jovanović I, Stevanović M, Mitrić M, Jordović B, Ignjatović N, Uskoković D. The Effect of Processing Parameters on Characteristics of Plla Microspheres. 2006;.
https://hdl.handle.net/21.15107/rcub_dais_327 .

Jovanović, Ivana, Stevanović, Magdalena, Mitrić, Miodrag, Jordović, Branka, Ignjatović, Nenad, Uskoković, Dragan, "The Effect of Processing Parameters on Characteristics of Plla Microspheres" (2006),
https://hdl.handle.net/21.15107/rcub_dais_327 .

TY  - CONF
AU  - Jovanović, Ivana
AU  - Mitrić, Miodrag
AU  - Ignjatović, Nenad
AU  - Uskoković, Dragan
PY  - 2006
UR  - https://dais.sanu.ac.rs/123456789/325
AB  - Poster presented at the International Workshop and Summer School Cell and Tissue Engineering, Faculty of Technology and Metallurgy, University of Belgrade, July 1-8, 2006.
T1  - Preparation and Characterization of Poly-l-lactide Microspheres
UR  - https://hdl.handle.net/21.15107/rcub_dais_325
ER  - 

@conference{
author = "Jovanović, Ivana and Mitrić, Miodrag and Ignjatović, Nenad and Uskoković, Dragan",
year = "2006",
abstract = "Poster presented at the International Workshop and Summer School Cell and Tissue Engineering, Faculty of Technology and Metallurgy, University of Belgrade, July 1-8, 2006.",
title = "Preparation and Characterization of Poly-l-lactide Microspheres",
url = "https://hdl.handle.net/21.15107/rcub_dais_325"
}

Jovanović, I., Mitrić, M., Ignjatović, N.,& Uskoković, D.. (2006). Preparation and Characterization of Poly-l-lactide Microspheres. .
https://hdl.handle.net/21.15107/rcub_dais_325

Jovanović I, Mitrić M, Ignjatović N, Uskoković D. Preparation and Characterization of Poly-l-lactide Microspheres. 2006;.
https://hdl.handle.net/21.15107/rcub_dais_325 .

Jovanović, Ivana, Mitrić, Miodrag, Ignjatović, Nenad, Uskoković, Dragan, "Preparation and Characterization of Poly-l-lactide Microspheres" (2006),
https://hdl.handle.net/21.15107/rcub_dais_325 .