Претраживање
Приказ резултата 11-20 од 50
Photocurable Poly-AMPS-Based Proton Exchange Membranes For Fuel Cells
(Basel : RadTech Europe, 2013)
Over the last 30 years, a variety of polymers have been developed and investigated as potential replacements for Nafion®. As with Nafion®, the majority of investigated polymers are poly sulfonic acids though alternate ...
Plasmonic Nanomembranes for Detection and Sensing
(Belgrade : s. n., 2015)
Nanomembranes, freestanding quasi-2D structures with thickness of the order of tens of nm and smaller and a giant aspect ratio with lateral dimensions of the order of millimeters, even centimeters, represent an important ...
Dynamic adsorption of Rhodamine B from dilute aqueous solutions using negatively-charged membrane adsorbers
(Belgrade : Institute of Technical Sciences of SASA, 2014)
A series of polyethersulfone membranes with integrated cross-linked poly(glycidyl methacrylate-co-2-acrylamido-2-methylpropane sulfonic acid) were synthesized using a combination of the traditional immersion precipitation ...
Novel asymmetric interpenetrating proton-conducting membrane
(ICOM 2011: Book of abstracts, 2011)
Fuel cells comprising proton-conducting polymer membranes are focus of active research due to their versatile applications as energy sources in the automotive, stationary and portable fields. A fluoro-ionomer membrane, ...
Inductively Coupled Plasma at Atmospheric Pressure, a Challenge for Miniature Devices
(IEEE, 2019)
Inductively coupled plasma (ICP) sources are preferred to the capacitive (CCP) sources because of their higher electron density and plasma purity. The use of microwaves for the plasma excitation allows not only to obtain ...
Photocurable Poly-AMPS-Based Proton Exchange Membranes For Fuel Cells
(Basel : RadTech Europe, 2013)
Proton exchange membranes (PEM) for low temperature fuel cells must ensure high proton conductivity and effective separation of anode and cathode under operating conditions. DuPont’s sulfonic acid fluoropolymer Nafion has ...
Novel crosslinkers for high performance poly-AMPS-based proton exchange membranes for fuel cells
(European Symposium of Photopolymer Science - ESPS 2012, Torino, September 4th-7th 2012: Book of Abstracts, 2012)
Polymer electrolyte fuel cells (PEFC) gained a lot of interest in recent years as a potential solution for an eco-friendly energy. Proton exchange membranes (PEM) are one of the main components of PEFCs and require mechanical ...
Proton conducting membranes based on photopolymerizable monomers
(ICOM 2011: Book of abstracts, 2011)
The proton exchange barrier or Proton Exchange Membrane (PEM) is the critical part of a fuel cell. The basic function of the membrane is to enable proton transport, while being simultaneously impermeable for electrons and ...
General-purpose controller for industrial manipulators
(Belgrade : Mihajlo Pupin Institute, 1984)
The general-purpose controller for industrial robots of arbitrary type is described. It enables control of robots powered by DC electromotors or hydraulic actuators. The controller includes programs for communication with ...
Multifunctionalized Self-supported (Nano) Membranes as Integrated Platform for Plasmonic Metamaterials
(Cambrridge, MA : The Electromagnetics Academy, 2013)
We considered the possibility to fabricate multifunctional nanocomposite membranes as a platform for plasmonic metamaterials, simultaneously incorporating pores, built-in functional groups and active nanoparticles. To this ...