Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing
Само за регистроване кориснике
2020
Аутори
Nikolić, Maria VesnaKrstić, Jugoslav
Labus, Nebojša
Luković, Miloljub
Dojčinović, Milena
Radovanović, Milan
Tadić, Nenad B.
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Iron manganite (FeMnO3) powder with a cubic (bixbyite,−Ia3) crystal structure was obtained by a solid statereaction. Thick film paste (powder+organic vehicles) was screen printed on alumina substrate with test interdigitatedPdAg electrodes. Significant porosity (60.6%) composed of macropores (larger than 100 nm) wasdetermined by Hg porosimetry, changing only slightly from the first extrusion run indicating a stable poresystem. Hg porosimetry evaluation of thick film samples enabled estimation of true textural parameters of thethick film compared to powder. Impedance response of the thick film sensor was monitored in a humiditychamber in the relative humidity (RH) range 30–90%, at room temperature (25 °C) and frequency range from42 Hz to 1 MHz. At 100 Hz the impedance reduced from 10.41 MΩ for RH 30% to 0.68 MΩ for RH 90%. Analysisof complex impedance using an equivalent circuit showed the dominant influence of grain boundaries. Thesensor response and recovery was fast (several seconds)... and a relatively low hysteresis value of 2.8% wasobtained.
Кључне речи:
iron manganite / humidity sensing / mercury porosimetry / thick films / complex impedanceИзвор:
Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 2020, 257, 114547-Издавач:
- Elsevier
Финансирање / пројекти:
- 0-3D наноструктуре за примену у електроници и обновљивим изворима енергије: синтеза, карактеризација и процесирање (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45007)
- Литијум-јон батерије и горивне ћелије-истраживање и развој (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45014)
- Наноструктурни функционални и композитни материјали у каталитичким и сорпционим процесима (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45001)
Напомена:
- Peer-reviewed manuscript: https://hdl.handle.net/21.15107/rcub_dais_10036
Повезане информације:
- Друга верзија
https://hdl.handle.net/21.15107/rcub_dais_10036
DOI: 10.1016/j.mseb.2020.114547
ISSN: 09215107
WoS: 000530869000003
Scopus: 2-s2.0-85083706035
Институција/група
Институт техничких наука САНУ / Institute of Technical Sciences of SASATY - JOUR AU - Nikolić, Maria Vesna AU - Krstić, Jugoslav AU - Labus, Nebojša AU - Luković, Miloljub AU - Dojčinović, Milena AU - Radovanović, Milan AU - Tadić, Nenad B. PY - 2020 UR - https://dais.sanu.ac.rs/123456789/8950 AB - Iron manganite (FeMnO3) powder with a cubic (bixbyite,−Ia3) crystal structure was obtained by a solid statereaction. Thick film paste (powder+organic vehicles) was screen printed on alumina substrate with test interdigitatedPdAg electrodes. Significant porosity (60.6%) composed of macropores (larger than 100 nm) wasdetermined by Hg porosimetry, changing only slightly from the first extrusion run indicating a stable poresystem. Hg porosimetry evaluation of thick film samples enabled estimation of true textural parameters of thethick film compared to powder. Impedance response of the thick film sensor was monitored in a humiditychamber in the relative humidity (RH) range 30–90%, at room temperature (25 °C) and frequency range from42 Hz to 1 MHz. At 100 Hz the impedance reduced from 10.41 MΩ for RH 30% to 0.68 MΩ for RH 90%. Analysisof complex impedance using an equivalent circuit showed the dominant influence of grain boundaries. Thesensor response and recovery was fast (several seconds) and a relatively low hysteresis value of 2.8% wasobtained. PB - Elsevier T2 - Materials Science and Engineering B: Solid-State Materials for Advanced Technology T1 - Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing SP - 114547 VL - 257 DO - 10.1016/j.mseb.2020.114547 UR - https://hdl.handle.net/21.15107/rcub_dais_8950 ER -
@article{ author = "Nikolić, Maria Vesna and Krstić, Jugoslav and Labus, Nebojša and Luković, Miloljub and Dojčinović, Milena and Radovanović, Milan and Tadić, Nenad B.", year = "2020", abstract = "Iron manganite (FeMnO3) powder with a cubic (bixbyite,−Ia3) crystal structure was obtained by a solid statereaction. Thick film paste (powder+organic vehicles) was screen printed on alumina substrate with test interdigitatedPdAg electrodes. Significant porosity (60.6%) composed of macropores (larger than 100 nm) wasdetermined by Hg porosimetry, changing only slightly from the first extrusion run indicating a stable poresystem. Hg porosimetry evaluation of thick film samples enabled estimation of true textural parameters of thethick film compared to powder. Impedance response of the thick film sensor was monitored in a humiditychamber in the relative humidity (RH) range 30–90%, at room temperature (25 °C) and frequency range from42 Hz to 1 MHz. At 100 Hz the impedance reduced from 10.41 MΩ for RH 30% to 0.68 MΩ for RH 90%. Analysisof complex impedance using an equivalent circuit showed the dominant influence of grain boundaries. Thesensor response and recovery was fast (several seconds) and a relatively low hysteresis value of 2.8% wasobtained.", publisher = "Elsevier", journal = "Materials Science and Engineering B: Solid-State Materials for Advanced Technology", title = "Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing", pages = "114547", volume = "257", doi = "10.1016/j.mseb.2020.114547", url = "https://hdl.handle.net/21.15107/rcub_dais_8950" }
Nikolić, M. V., Krstić, J., Labus, N., Luković, M., Dojčinović, M., Radovanović, M.,& Tadić, N. B.. (2020). Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing. in Materials Science and Engineering B: Solid-State Materials for Advanced Technology Elsevier., 257, 114547. https://doi.org/10.1016/j.mseb.2020.114547 https://hdl.handle.net/21.15107/rcub_dais_8950
Nikolić MV, Krstić J, Labus N, Luković M, Dojčinović M, Radovanović M, Tadić NB. Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing. in Materials Science and Engineering B: Solid-State Materials for Advanced Technology. 2020;257:114547. doi:10.1016/j.mseb.2020.114547 https://hdl.handle.net/21.15107/rcub_dais_8950 .
Nikolić, Maria Vesna, Krstić, Jugoslav, Labus, Nebojša, Luković, Miloljub, Dojčinović, Milena, Radovanović, Milan, Tadić, Nenad B., "Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing" in Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 257 (2020):114547, https://doi.org/10.1016/j.mseb.2020.114547 ., https://hdl.handle.net/21.15107/rcub_dais_8950 .