YAG:Ce3+ nanostructured particles obtained via spray pyrolysis of polymeric precursor solution
Samo za registrovane korisnike
2010
Autori
Mančić, LidijaMarinković, Katarina
Marinković, Bojan A.
Dramićanin, Miroslav
Milošević, Olivera
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Cerium-doped yttrium aluminum garnet (YAG:Ce3+) powder phosphor is synthesized via spray pyrolysis of polymeric precursor solution obtained by dissolving the corresponding nitrates in ethylenediaminetetraacetic acid (EDTA). Ultrasonically generated aerosol droplets are decomposed at 600 °C in argon atmosphere. Following the initial attempt in providing pure YAG:Ce3+ phase generation the particles were additionally thermally treated for 3 h in air at 1000 and 1100 °C. The powder morphology is followed with scanning electron microscopy (SEM), while inner particle structure is analysed by analytical and high-resolution transmission electron microscopy (TEM). Phase identification is performed by X-ray powder diffraction (XRPD) based on which a structural refinement through Rietveld method was done. The spherical submicronic particles have grained sub-structure comprising clustered garnet monocrystals sized below 100 nm. The YAG:Ce3+ emission shows wide peak in the range 470-600 nm with the... maximum near 520 nm. © 2009 Elsevier Ltd. All rights reserved.
Ključne reči:
spray pyrolysis / X-ray methods / garnet / polymeric precursorIzvor:
Journal of the European Ceramic Society, 2010, 30, 2, 577-582Izdavač:
- Elsevier
Finansiranje / projekti:
- Sinteza, karakterizacija i aktivnost organskih i koordinacionih jedinjenja i njihova primena u (bio)nanotehnologiji (RS-142010)
- MPNS COST Action 539 - Electroceramics from Nanopowders Produced by Innovative Methods (ELENA)
DOI: 10.1016/j.jeurceramsoc.2009.05.037
ISSN: 0955-2219
WoS: 000272455600079
Scopus: 2-s2.0-70449523438
Institucija/grupa
Институт техничких наука САНУ / Institute of Technical Sciences of SASATY - JOUR AU - Mančić, Lidija AU - Marinković, Katarina AU - Marinković, Bojan A. AU - Dramićanin, Miroslav AU - Milošević, Olivera PY - 2010 UR - https://dais.sanu.ac.rs/123456789/3438 AB - Cerium-doped yttrium aluminum garnet (YAG:Ce3+) powder phosphor is synthesized via spray pyrolysis of polymeric precursor solution obtained by dissolving the corresponding nitrates in ethylenediaminetetraacetic acid (EDTA). Ultrasonically generated aerosol droplets are decomposed at 600 °C in argon atmosphere. Following the initial attempt in providing pure YAG:Ce3+ phase generation the particles were additionally thermally treated for 3 h in air at 1000 and 1100 °C. The powder morphology is followed with scanning electron microscopy (SEM), while inner particle structure is analysed by analytical and high-resolution transmission electron microscopy (TEM). Phase identification is performed by X-ray powder diffraction (XRPD) based on which a structural refinement through Rietveld method was done. The spherical submicronic particles have grained sub-structure comprising clustered garnet monocrystals sized below 100 nm. The YAG:Ce3+ emission shows wide peak in the range 470-600 nm with the maximum near 520 nm. © 2009 Elsevier Ltd. All rights reserved. PB - Elsevier T2 - Journal of the European Ceramic Society T1 - YAG:Ce3+ nanostructured particles obtained via spray pyrolysis of polymeric precursor solution SP - 577 EP - 582 VL - 30 IS - 2 DO - 10.1016/j.jeurceramsoc.2009.05.037 UR - https://hdl.handle.net/21.15107/rcub_dais_3438 ER -
@article{ author = "Mančić, Lidija and Marinković, Katarina and Marinković, Bojan A. and Dramićanin, Miroslav and Milošević, Olivera", year = "2010", abstract = "Cerium-doped yttrium aluminum garnet (YAG:Ce3+) powder phosphor is synthesized via spray pyrolysis of polymeric precursor solution obtained by dissolving the corresponding nitrates in ethylenediaminetetraacetic acid (EDTA). Ultrasonically generated aerosol droplets are decomposed at 600 °C in argon atmosphere. Following the initial attempt in providing pure YAG:Ce3+ phase generation the particles were additionally thermally treated for 3 h in air at 1000 and 1100 °C. The powder morphology is followed with scanning electron microscopy (SEM), while inner particle structure is analysed by analytical and high-resolution transmission electron microscopy (TEM). Phase identification is performed by X-ray powder diffraction (XRPD) based on which a structural refinement through Rietveld method was done. The spherical submicronic particles have grained sub-structure comprising clustered garnet monocrystals sized below 100 nm. The YAG:Ce3+ emission shows wide peak in the range 470-600 nm with the maximum near 520 nm. © 2009 Elsevier Ltd. All rights reserved.", publisher = "Elsevier", journal = "Journal of the European Ceramic Society", title = "YAG:Ce3+ nanostructured particles obtained via spray pyrolysis of polymeric precursor solution", pages = "577-582", volume = "30", number = "2", doi = "10.1016/j.jeurceramsoc.2009.05.037", url = "https://hdl.handle.net/21.15107/rcub_dais_3438" }
Mančić, L., Marinković, K., Marinković, B. A., Dramićanin, M.,& Milošević, O.. (2010). YAG:Ce3+ nanostructured particles obtained via spray pyrolysis of polymeric precursor solution. in Journal of the European Ceramic Society Elsevier., 30(2), 577-582. https://doi.org/10.1016/j.jeurceramsoc.2009.05.037 https://hdl.handle.net/21.15107/rcub_dais_3438
Mančić L, Marinković K, Marinković BA, Dramićanin M, Milošević O. YAG:Ce3+ nanostructured particles obtained via spray pyrolysis of polymeric precursor solution. in Journal of the European Ceramic Society. 2010;30(2):577-582. doi:10.1016/j.jeurceramsoc.2009.05.037 https://hdl.handle.net/21.15107/rcub_dais_3438 .
Mančić, Lidija, Marinković, Katarina, Marinković, Bojan A., Dramićanin, Miroslav, Milošević, Olivera, "YAG:Ce3+ nanostructured particles obtained via spray pyrolysis of polymeric precursor solution" in Journal of the European Ceramic Society, 30, no. 2 (2010):577-582, https://doi.org/10.1016/j.jeurceramsoc.2009.05.037 ., https://hdl.handle.net/21.15107/rcub_dais_3438 .