Претраживање
Приказ резултата 1-10 од 33
Microstructural and electrical properties of cordierite-based ceramics obtained after two-step sintering technique
(Science of Sintering, 2016)
Cordierite-based ceramic materials are attracting much interest for their various applications in industry, for manufacturing multilayer circuit boards, catalytic converters, filters, thermal insulation, kiln furniture, ...
Preparation and characterization of Cu and Zn modified nickel manganite NTC powders and thick film thermistors
(Elsevier, 2013)
A simple ball milling/thermal treatment procedure was applied to obtain fine thermistor powders. Three different powder compositions were analyzed–Cu0.2Ni0.5Zn1.0Mn1.3O4, Cu0.25Ni0.5Zn1.0Mn1.25O4 and Cu0.4Ni0.5Mn2.1O4. XRD ...
Impedance response and dielectric relaxation in liquid-phase sintered Zn 2SnO 4-SnO 2 ceramics
(Springer US, 2010)
Impedance/admittance and dielectric spectroscopy were used to investigate the effect of temperature on the electrical response of liquid-phase sintered Zn 2SnO 4-SnO 2 ceramics. The measurements were performed over a wide ...
Influence of mechanical activation on functional properties of barium hexaferrite ceramics
(Elsevier, 2018)
Barium hexaferrite ceramics were prepared using mechanically activated mixtures of iron and barium titanate. The 60:40 mass% Fe:BaTiO3 powder mixtures were mechanically activated for different times (100–240 min) and ...
Electrical properties of barium titanate stannate functionally graded materials
(Elsevier, 2010)
Barium titanate stannate (BTS) functionally graded materials (FGMs) with different tin/titanium concentration gradient were prepared by the powder-stacking method and uniaxially pressing process, followed by sintering. ...
Influence of mechanical activation on structural and electrical properties of sintered MgTiO3 ceramics
(Belgrade : International Institute for the Science of Sintering, 2009)
The aim of this work was to analyze the influence of mechanical activation on the MgCO3-TiO2 system. Mixtures of MgCO3-TiO2 were mechanically activated for 15, 30, 60 and 120 minutes in a planetary ball mill and after that ...
Influence of mechanical activation on functional properties of barium hexaferrite ceramics
(Elsevier, 2018)
Barium hexaferrite ceramics were prepared using mechanically activated mixtures of iron and barium titanate. The 60:40 mass% Fe:BaTiO3 powder mixtures were mechanically activated for different times (100–240 min) and ...
Processing and properties of dense cordierite ceramics obtained through solid-state reaction and pressure-less sintering
(Taylor and Francis, 2019)
Sintering of pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with the addition of 5 mass % TeO2 was studied. Green bodies were prepared from powder mixtures mechanically activated in a high-energy planetary mill, shaped ...
The influence of mechanical activation on the electrical properties of Ba0.77Sr0.23TiO3 ceramics
(Elsevier, 2014)
Ferroelectric barium strontium titanate (Ba0.77Sr0.23TiO3), BST, was prepared by solid-state reactions using as the starting compounds powder of barium carbonate (BaCO3), strontium carbonate (SrCO3) and titanium dioxide ...
Influence of Bi2O3 on microstructure and electrical properties of ZnO-SnO2 ceramics
(Belgrade : International Institute for the Science of Sintering, 2007)
The effects of small amounts (0.5; 1.0 and 1.5 mol. %) of bismuth oxide on the microstructure and electrical properties of ZnO-SnO2 ceramics have been studied. Starting powders of ZnO and SnO2 were mixed in the molar ratio ...