Претраживање
Приказ резултата 1-10 од 10
The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics
(Societa ceramica italianaPolitecnico di Torino, 2019)
Magnesium aluminate, MgAl2O4, and other alumina-based spinels are refractory ceramics with high hardness and resistance to chemical attack while also being possible microwave dielectrics. Pure MgAl2O4 can be optically ...
Sintering of Zinc-Titanate
(Atlantis Press, 2016)
Sintering kinetics of the mechanically activated ZnO-TiO2 system was studied. Mixtures of ZnO and TiO2 powders were mechanically activated using a high-energy ball mill for different time intervals from 0 to 300 min. Formal ...
The Influence of Mechanical Activation on Sintering Process of BaCO3-SrCO3-TiO2 System
(Belgrade : Serbian Ceramic Society, 2012)
In this article the influence of mechanical activation on sintering process of barium-strontiumtitanate ceramics has been investigated. Both non-activated and mixtures treated in planetary ball mill for 5, 10, 20, 40, 80 ...
Microwave Electro Ceramic Based on Magnesium Titanate Compounds
(Paris : Atlantis Press, 2017)
The intensive progress in electronics, especially telecommunication and mobile phone in 1990s, was the main driving force for the extensive research and development of microwave ceramics. These materials are often used in ...
Influence of Mechanical Activation on Electrical Properties of Ceramic Materials in VHF Band
(Belgrade : ETRANBelgrade : Academic Mind, 2019)
Mechanical activation is commonly used as a pre-sintering process in order to enhance the reactivity of materials, reduce the particle size, increase diffusion rates, accelerate the reaction, and lower the sintering ...
Influence of mechanochemical activation on sintering of cordierite ceramics with the presence of Bi2O3 as a functional additive
(Belgrade : Materials Research Society of Serbia, 2011)
According to its exceptional electrical characteristics, such as low temperature expansion coefficient, low dielectric constant and good mechanical properties, cordierite, 2MgO⋅2Al2O3⋅5SiO2, represents very attractive ...
Reaction kinetics of mechanically activated cordierite based ceramics studied via DTA
(Ljubljana : Central and Eastern European Committee for Thermal Analysis and Calorimetry, 2015)
Cordierite, 2MgO•2Ah03•5Si02 (MAS), is a very attractive high-temperature ceramic material. In order to accelerate the process of sintering, 5.00 mass% Mo03 was added to the starting mixtures. The mechanical activation of ...
Influence of one activated component on the sintering process of three phase system
(Belgrade : Materials Research Society of Serbia, 2013)
According to its low temperature thermal expansion coefficient, low dielectric constant, also good mechanical properties, cordierite, 2MgO×2Al2O3×5SiO2, represents a very attractive hightemperature ceramic material. In ...
Sintering of mechanically activated MgO-TiO2 system
(Belgrade : Institute of Technical Sciences of SASA, 2011)
Mixtures of MgO-TiO2 powders were mechanically activated in planetary ball mill for time interval from 0 to 120 minutes. The influence of mechanical activation on phase composition and crystal structure was analyzed by ...
Synthesis and Characterization of Multifferoics 16%(Fe2O3)4%(BaCO3)80%(BaTiO3)
(Belgrade : Serbian Ceramic Society, 2017)
The initial powder (16 % Fe2O3, 4 % BaCO3, 80 % BaTiO3) was mechanically activated in a planetary mill for 20, 80, 120, 160, 200 and 220 minutes in air. Modified Faraday method was used to perform magnetization measurements ...