Now showing items 1-10 of 111
Sintering of fly ash based composites with zeolite and bentonite addition for application in construction materials
(International Institute for the Science of Sintering, 2017)
Due to pozzolanic characteristics, fly ash is commonly used as a cement replacement in construction composites. Addition of natural clays with sorption ability (i.e. zeolite and bentonite) in to the fly ash based construction ...
Influence of nitrogen and air atmosphere during thermal treatment on micro and nano sized powders and sintered TiO2 specimens
(Belgrade : International Institute for the Science of Sintering, 2014)
The influence of air and nitrogen atmosphere during heating on TiO2 nano and micro sized powders as well as sintered polycrystalline specimens was analyzed. Sintering of TiO2 nano and micro powders in air atmosphere was ...
Statistical Analysis of the Influence of Temperature on Microstructure Contact Surfaces on BaTiO3 -ceramics Doped with Ho2O3
(Belgrade : Serbian Ceramic Society, 2014)
The materials based on BaTiO3 can be controlled using different technological parameters and different additives. We investigate the influence of different temperature levels of sintering (1320°C, 1350°C and 1380°C) on the ...
The Influence of Mechanical Activation on Sintering Process of BaCO3-SrCO3-TiO2 System
(Belgrade : Serbian Ceramic Society, 2012)
In this article the influence of mechanical activation on sintering process of barium-strontiumtitanate ceramics has been investigated. Both non-activated and mixtures treated in planetary ball mill for 5, 10, 20, 40, 80 ...
Synthesis, characterization and sintering properties of Zr-doped hydroxyapatite
(Belgrade : Institute of Technical Sciences of the Serbian Academy of Sciences and Arts, 2011)
Improving of material characteristics could be achieved in different ways, but it is always connected with the issue of impairing the other functional properties. Hydroxyapatite bioceramics lacks of insufficient mechanical ...
The influence of mechanical activation on sintering process of BaCO3-SrCO3-TiO2 system
(Belgrade : International Institute for the Science of Sintering, 2012)
In this article the influence of mechanical activation on sintering process of bariumstrontium-titanate ceramics has been investigated. Both non-activated and mixtures treated in a planetary ball mill for 5, 10, 20, 40, ...
Influence of Point Defects Concentration on Densification Process and Optical Properties of Sintered ZnO Ceramics
(Belgrade : Materials Research Society of Serbia, 2015)
Zinc oxide is one of the most studied materials due to its potential applications in electronics, optoelectronics and spintronics. In the forms of single crystal and thin-film ZnO could be used as UV and blue light emitter, ...
Shungite - a Russian mineral: possible application as a microwave absorber
(Belgrade : Materials Research Society of Serbia, 2018)
The paper presents results of investigation of the influence of mechanical activation of shungite, a Russian natural mineral rich in silica and carbon, on its sintering behavior. The mechanical activation of the starting ...
Sinterovanje i svojstva sinterovanog ZnTiO3
PhD defence presentation. The thesis "Sintering and Properties of Sintered ZnTiO3" was defended at the University of Belgrade, Faculty of Physical Chemistry, in 2011.
Structural and electrical properties of barium-zinc-titanate ceramics sintered at 1300ºc
(Belgrade : Institute of Technical Sciences of SASA, 2010)
The aim of this work was an investigation of structural and electrical properties of sintered barium-zinc-titanate ceramics. Mixtures of BaCO3, ZnO and TiO2 were mechanically activated in a planetary ball mill up to 80 ...