Претраживање
Приказ резултата 81-90 од 1241
Universal modular device for electrochemical syntesis of the disinficant
(Sarajevo : Faculty of Mechanical Engineering, 2012)
For the water disinfections practically four different technologies (chlorine, ozone, hypochlorite, chlorine dioxide) are used nowadays in the world. The oldest and the most exploited one, so called conventional, is the ...
Microstructure and EDS Characterization of Doped BaTiO3 Ceramics
(Belgrade : Serbian Ceramic Society, 2018)
The purpose of this paper is an investigation of the effects of various dopants (La, Nb, Sb) on the microstructure properties, phase composition and contact surface of BaTiO3 based ceramics. The doped BaTiO3-ceramics were ...
Ultrasonic Processing of Hierarchically Organized TiO2 Functional Nanomaterials
(Belgrade : Serbian Ceramic Society, 2014)
Hierarchically organized functional nanomaterials are of interest for potential use in electrochemical, catalytic and gas-sensing applications due to their unique structural organization defined on different length scales. ...
The Influence of Temperature on Microstructure Contact Surfaces on BaTiO3 –ceramics Doped with Ho2O3
(Belgrade : Serbian Ceramic Society, 2014)
The materials based on BaTiO3 can be controlled using different technological parameters and different additives. We investigate the influence of different temperature levels of sintering (1320°C, 1350°C and 1380°C) on the ...
Photo-assisted electrochemical oxidation of the urea onto TiO2-nanotubes modified by hematite
(Elsevier, 2017)
The electrochemical oxidation of the urea in near neutral pH is investigated on platinum electrode. It is shown that oxidation reaction is practically inhibited up to the potentials of ∼0.9 V. The same reaction is investigated ...
Development of lyophilized spherical particles of poly(epsilon-caprolactone) and examination of their morphology, cytocompatibility and influence on the formation of reactive oxygen species
(Paris : Association de pharmacie galenique industrielle, 2014)
A common limitation of using polymeric micro- and nanoparticles in long-term conservation is due to their poor physical and chemical stability. Freeze-drying is one of the most convenient methods that enable further ...
Characterisation of Mn0.63Zn0.37Fe2O4 powders after intensive milling and subsequent thermal treatment
(Science of Sintering, 2017)
Commercial Mn-Zn powder (Mn0.63Zn0.37Fe2O4, 93 wt. % and Fe2O3 7 wt. %) was milled 0.5, 1, 2 and 4 hours in a planetary ball mill. The goal was to observe intensive milling influences on oxidation and reduction processes ...
Structural and electrochemical study of lithium iron (II) pyrophosphate
(Belgrade : Materials Research Society of Serbia, 2018)
Lithium iron(II) pyrophosphate, Li2FeP2O7, attracts attention of researchers for application as a cathode material in rechargeable lithium batteries. Li2FeP2O7 has somewhat higher voltage than commercial LiFePO4 (3.5 and ...
Analysis of the Influence of Competitive Adsorption and Mass Transfer on Adsorbed Mass Fluctuations in Affinity-Based Biosensors
(Elsevier, 2012)
We analyze the fluctuations of the equilibrium adsorbed mass in affinity-based biosensors, caused by both the random nature of adsorption-desorption and mass transfer processes of two molecular species (the target and the ...
Structural, electrical and magnetic properties of mechanically activated manganese and zinc ferrite
(Belgrade : Institute for Multidisciplinary Research of the University of Belgrade, 2017)
Starting hematite (Fe2O3), zinc oxide (ZnO) and manganese carbonate (MnCO3) powders were homogenized in a planetary ball mill in stainless steel bowls with stainless steel balls for 15 min, calcined in air at 1000 C for ...