Претраживање
Приказ резултата 31-40 од 193
Effect of consolidation parameters on structural, microstructural and electrical properties of magnesium titanate ceramics
(Elsevier, 2016)
The aim of this study is to explore the influence of the processing route on the structural and physical properties of bulk MgTiO3 ceramics. Commercially available MgO and TiO2 powders were mechanically activated in a ...
Pseudobrookite thick films for potential application as low-temperature sensitive material in NO gas sensors
(IEEE, 2017)
Pseudobrookite thick films were obtained by screen printing paste composed of a 1:1.5 molar ratio mixture of starting nanopowders of hematite and anatase, glass frit and organic binder. The films were deposited on alumina ...
Discrete temperature values in the sintering process as a BaTiO3-ceramics properties parameter
(Belgrade : International Institute for the Science of Sintering, 2017)
In this paper, we develop the new physical-mathematical time scale approach-model applied to BaTiO3-ceramics. At the beginning, a time scale is defined to be an arbitrary closed subset of the real numbers R, with the ...
Sintering of Zinc-Titanate
(Atlantis Press, 2016)
Sintering kinetics of the mechanically activated ZnO-TiO2 system was studied. Mixtures of ZnO and TiO2 powders were mechanically activated using a high-energy ball mill for different time intervals from 0 to 300 min. Formal ...
Synthesis and dielectric properties of calcium copper titanate (CCTO) based ceramics
(Belgrade : Institute of Technical Sciences of SASA, 2010)
The perovskite CaCu3Ti4O12 (CCTO) powders with various oxide phase impurities were synthesized via citric gel combustion method. Influence of citric acid amount used for gel preparation was examined in order to lower CCTO ...
Influence of mechanical activation on functional properties of barium hexaferrite ceramics
(Elsevier, 2018)
Barium hexaferrite ceramics were prepared using mechanically activated mixtures of iron and barium titanate. The 60:40 mass% Fe:BaTiO3 powder mixtures were mechanically activated for different times (100–240 min) and ...
Designing, fabrication and characterization of nanostructured functionally graded HAp/BCP ceramics
(Elsevier, 2015)
Nanostructured calcium phosphate functionally graded materials (FGMs) with simultaneous gradients of density, phase composition, and mechanical properties were fabricated by consecutive uniaxial pressing of stoichiometric ...
Electrical properties of barium titanate stannate functionally graded materials
(Elsevier, 2010)
Barium titanate stannate (BTS) functionally graded materials (FGMs) with different tin/titanium concentration gradient were prepared by the powder-stacking method and uniaxially pressing process, followed by sintering. ...
The master sintering curves for BaTi0.975Sn0.025O3/BaTi0.85S n0.15O3 functionally graded materials
(Elsevier, 2009)
The most important aim in the design and processing of functionally graded materials (FGMs) is to produce devices free from any deformation. Smart choices of different combination of graded layers, as well as the heating ...
Humidity sensing potential of Fe2TiO5—pseudobrookite
(Springer US, 2018)
Bulk samples of pseudobrookite with an orthorhombic crystal structure were prepared by sintering a mixture of starting hematite and anatase nano powders in the weight ratio 60:40 at three different sintering temperatures ...