Претраживање
Приказ резултата 11-20 од 57
Nanostructured Fe2O3/TiO2 thick films prepared by screen printing
(Novi Sad : University of Novi Sad, Faculty of Technology, 2013)
Nanostructured single layered (pure TiO2 , pure α-Fe2O3 and mixed Fe2O3 /TiO2 with two different oxide ratios, 2 : 3 and 3 : 2) and double layered (TiO2 layer over a Fe2O3 layer) thick films have been fabricated by screen ...
Dvostepeno sinterovanje, fazne transformacije, električne i mehaničke osobine nanostrukturnih biokeramičkih materijala na bazi hidroksiapatita
(Belgrade : University of Belgrade, Faculty of Physical Chemistry, 2014)
Doktorska disertacija se odnosi na kreiranje gustih nanostrukturnih sinterovanih materijala na bazi hidroksiapatita. Dvostepeno sinterovanje je iskorišćeno za dobijanje bifaznog kalcijum fosfata visoke gustine polazeći od ...
Synthesis and properties of hydroxyapatite/poly-L-lactide composite biomaterials
(Oxford : Elsevier Sci Ltd, 1999)
Calcium hydroxyapatite (HAp) and poly-L-lactide (PLLA) were synthesized chemically. The obtained HAp was of high purity and, after special thermal treatment, of high crystallinity as well. Synthesis of PLLA was performed ...
The influence of temperature on microstructure contact surfaces on BaTiO3 ceramic doped with Ho2O3
(Belgrade : Serbian Ceramic Society, 2013)
The materials based on BaTiO3 can be controlled using different technological parameters and different additives. We investigate the influence of different temperature levels of sintering (1320°C, 1350°C and 1380°C) on the ...
Influence of Bi2O3 on microstructure and electrical properties of ZnO-SnO2 ceramics
(Belgrade : International Institute for the Science of Sintering, 2007)
The effects of small amounts (0.5; 1.0 and 1.5 mol. %) of bismuth oxide on the microstructure and electrical properties of ZnO-SnO2 ceramics have been studied. Starting powders of ZnO and SnO2 were mixed in the molar ratio ...
Compressive strength and microstructure of ordinary cured and autoclaved cement-based composites with mechanically activated kaolins
(Elsevier, 2018)
The effects of two different mechanically activated kaolins, AKV (61% kaolinite, 14% quartz and 16% mica) and AKG (51.6% kaolinite and 40.6% quartz) on the compressive strength of cement composites and microstructure of ...
Comprehensive characterization of BiFeO3 powder synthesized by the hydrothermal procedure
(Novi Sad Faculty of Technology, University of Novi Sad, 2016)
In this paper, bismuth ferrite (BFO) particles synthesized by controlled hydrothermal process, where the particles of small sizes and with high purity were obtained. Structural analysis showed that non-annealed powder can ...
Sintering Effects on Microstructure and Electrical Properties of CaCu3Ti4O12 Ceramics
(Hoboken, NJ : John Wiley & Sons, 2013)
CCTO powders were prepared by solid state reaction and mechanochemically, respectively. Synthesized powders were characterized by XRD, FE-SEM and PSA techniques. The sinterability of CCTO powders was investigated by heating ...
Geometrical and electrical properties of NTC polycrystalline thermistors vs. Changes of sintering parameters
(Belgrade : International Institute for the Science of Sintering, 2006)
NTC thermistor powder was made of a Mn, Ni, Fe and Co oxide mixture calcinated at 1050°C / 60 min. The powder was milled in a ball mill down to an average particle diameter of 0.9 μm. Small disc shaped pills of the powder ...
Inert atmosphere processing of hydroxyapatite in the presence of lithium iron phosphate
(Journal of the European Ceramic Society, 2018)
The present study describes sintering behaviour of hydroxyapatite (HAp) upon addition of lithium iron phosphate (LFP) (1-10 wt.%) system in inert (Ar) atmosphere. The interaction between materials and melting of LFP ...