Претраживање
Приказ резултата 121-130 од 176
Electrochemical oxidation of maricite NaFePO4 in mild aqueous solutions as a way to boost its charge storage capacity
(Belgrade : Institute of Technical Sciences of SASA, 2019)
Lithium has a low abundance in the Earth's crust, which in a few years will lead to difficult lithium production, and therefore difficult production of lithium-ion batteries. Sodium-ion batteries, on the other hand, have ...
Tuning the optical, electrical and photoelectrocatalytic properties of Zno materials by varying of intrinsic defects concentration
(Budapest : [s. n.], 2019)
During the last decade zinc oxide (ZnO) has attracted considerable attention as a promising material for electronic, optoelectronic and spintronic devices. ZnO has a wide bandgap (3.37 eV at room temperature) and relatively ...
Electrical and mechanical properties of alumina doped with transition metal oxides sintered at 1400°C
(Societa ceramica italianaPolitecnico di Torino, 2019)
Corundum (alpha-alumina) is one of the most exploited materials in ceramic industry due to its good physico-chemical properties, mechanical properties, and, importantly, due to its low cost. Advantageous properties, such ...
Influence of Mechanical Activation on Electrical Properties of Ceramic Materials in VHF Band
(Belgrade : ETRANBelgrade : Academic Mind, 2019)
Mechanical activation is commonly used as a pre-sintering process in order to enhance the reactivity of materials, reduce the particle size, increase diffusion rates, accelerate the reaction, and lower the sintering ...
Characterization of MgAl2O4 sintered ceramics
(Belgrade : Serbian Ceramic Society, 2019)
Single crystalline phase MgAl2O4 is made from the predetermined composition of MgO-Al2O3 powder mixture by using ball-milling. Mixtures of MgO and Al2O3 are treated in planetary ball mill for 30, 60, 90 and 120 minutes, ...
Theoretical and experimental study of polycrystalline phases obtained by the nanometric ZnTiO3 powder sintering
(Belgrade : Institute for Multidisciplinary Research, 2019)
In this study we have combined two research methods: structure prediction of ZnTiO3 using computational SPuDS software, and the characterization of binary oxides obtained from ZnO TiO2 system. Pure nanosized ZnTiO3 (99.5%), ...
Mg/Cu co-substituted hydroxyapatite – Biocompatibility, mechanical properties and antimicrobial activity
(Elsevier, 2019)
The aim of this study was to improve the mechanical properties and to optimize antimicrobial activity of hydroxyapatite (HAP) by simultaneous doping with Mg and Cu ions in order to obtain material that would be able to ...
Synthesis of barium-zinc-titanate ceramics
(Belgrade : International Institute for the Science of Sintering, 2012)
Mixtures of BaCO3, ZnO and TiO2 powders, with molar ratio of 1:2:4, were mechanically activated for 20, 40 and minutes in a planetary ball mill. The resulting powders were compacted into pellets and isothermally sintered ...
Niobium doping effect on BaTiO3 structure and dielectric properties
(Elsevier, 2020)
The effect of Nb on the microstructure and dielectric properties of BaTiO3 ceramics was investigated. The Nb/Mn–BaTiO3 ceramics were prepared using a conventional solid-state method. The concentration of Nb varied from 0.1 ...
Electrical Characteristics of Ho doped BaTiO3 Ceramics
(Belgrade : Serbian Ceramic Society, 2019)
In this paper, electrical characteristics of Ho2O3 doped BaTiO3 ceramics were shown, using new method for measuring samples. The BaTiO3 doped samples were sintered at 1320°C for 4 hours. The concentration of the additives ...