Претраживање
Приказ резултата 1021-1030 од 1104
Structural and functional properties of ZnO thin films grown on Si substrates by air assisted USP method from non-aqueous solutions at low-temperature
(Advanced Powder Technology, 2017)
In this work, we deals with the processing and characterization of transparent conducting ZnO thin films on p-type Silicon substrates (1 0 0) by air assisted Ultrasonic Spray Pyrolysis (USP) method. The thin films from ...
Preparation of pozzolanic addition by mechanical treatment of kaolin clay
(Elsevier, 2014)
Batches containing 5 kg of Serbian medium-quality kaolin clay were mechanically treated in a conventional ball mill for 10, 30, 60, 120, 600 and 1200 min of milling time. High reactive pozzolanic addition was obtained as ...
Structural, electrical and magnetic properties of nickel manganite obtained by a complex polymerization method
(Elsevier, 2014)
Structural, electrical and magnetic properties of nickel manganite ceramics obtained by sintering fine powders prepared by a complex polymerization method are given in this work. The phase composition of the synthesized ...
New multifunctional materials based on steel slag
(Belgrade : Materials Research Society of Serbia, 2018)
Electric arc furnace slag (EAFS) is the by-product of steel production in an electric arc furnace. In a pass two decade a special attention is paid to the valorization of metallurgical slags by alkali activation. The process ...
Highly sensitive graphene-based chemical and biological sensors with selectivity achievable through low-frequency noise measurement — Theoretical considerations
(IEEE, 2014)
We have developed a theory of the low-frequency noise caused by interaction of the analyte with the active area of chemical and biological sensors. The main result is an analytical expression for the spectral density of ...
Optimization and Application of NTC Thick Film Segmented Thermistors
(Zurich : Trans Tech Publications Inc., 2013)
NTC thermistor paste for printing thermal sensors on alumina was formed of very fine Ni0.5Cu0.2Zn1.0Mn1.3O4 thermistor powder obtained by a combined mechanical activation/thermal treatment process, organic vehicle and glass ...
Proučavanje procesa sinteze i svojstava višefaznih oksidnih prahova dobijenih hidrotermalnim procesiranjem
(Belgrade : University of Belgrade, Faculty of Technology and Metallurgy, 2014)
Doktorska disertacija obuhvata istraživanja fundamentalnih aspekata i strategija sinteze koloidnih nanokristala, nanostruktura i submikronskih kristala nekoliko neorganskih oksidnih materijala i zlata, hidrotermalnim i ...
Polyaniline stabilization of magnetic particles and immobilization of α-amylase
(Belgrade : Association of Chemists and Chemical Engineers of Serbia, 2018)
Magnetic particles (MAG), obtained by standard procedure of coprecipitation of Fe2+ and Fe3+ in an excess of ammonia, and polyaniline modified magnetic particles MAG-PANI were used as carriers for immobilization of α-amylase ...
Influence of mechanical activation on electrical properties of barium–zinc–titanate ceramics sintered at 1100°C
(Springer US, 2012)
Starting mixtures of BaCO3, ZnO, and TiO2 powders are mechanically activated in a planetary ball mill for various periods of time. The powders obtained are sintered isothermally at 1100°C for 120 min. Non-isothermal sintering ...
Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia
(Belgrade : Institute of Technical Sciences of SASA, 2015)
Young Researchers' meetings are held annually late in December since 2002 and they are organized by the Materials Research Society of Serbia. Originally conceived as seminars, since 2007 these meetings were transformed ...